over 50 times more powerful than regular lubricants!

Post on 02-Jan-2016

51 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

DESCRIPTION

Over 50 Times More Powerful Than Regular Lubricants!. Earth Friendly Technology. Xtreme Pressure Lubricants. Supper Concentrated Fuel additives. Environmentally Friendly. Xtreme Performance and Environmentally Friendly! Plant/Vegetable-based products Stable Non-corrosive - PowerPoint PPT Presentation

TRANSCRIPT

Over 50 Times More Powerful Than

Regular Lubricants!

2

Xtreme Pressure

Lubricants

Supper Concentrated Fuel additives

Earth Friendly Technology

3

Environmentally Friendly

Xtreme Performanceand Environmentally Friendly!

• Plant/Vegetable-based products• Stable• Non-corrosive• Non-reportable

4

EnvironmentallyFriendly

• Reduce energy consumption

• Vegetable based

• Reduce usage of petroleum-based lubricants

• Safe for human contact

• Minimal disposability issues

• Several products are Food grade / biodegradable

EPA APPROVED

Environmental, Health & Safety

approval

NSF Food Grade certification

5

Engine LifeTreatment

Industrial Oil Concentrate

Cutting Oil

Water Soluble Cutting Fluids

Hydraulic Treatment

EP-2 Grease

Penetrating Lubricant

Motor Oil

Core Technology

Heavy Duty Oil Stabilizer

Down hole Drilling Fluid

6

Technology

Typical Lubricants

Charge - +Bonding/flowing Flowing Bonding

Reaction to heat & pressure

Migrates away Migrates towards

Film strength Limited Extraordinary

Environmentally friendly

No Yes

7

• Dramatically reduces heat & friction Reduces wear to extend equipment life Displaces moisture, prevents corrosion Lowers energy consumption Helps prevent costly down time Optimizes equipment efficiency Fewer oil changes

Bottom Line Benefits

8

Four Ball Wear Test

Wear Reduction

0.387

0.445

0.35

0.36

0.37

0.38

0.39

0.4

0.41

0.42

0.43

0.44

0.45

MOTOR OIL WITHOUT XPL+ MOTOR OIL WITH XPL+

mm

Test Method: ASTM D-4172 40kg 1 hour @ 75oCMake & Model: PTI M-4

Base Product: 5W-30 motor oil without XPL+ technologyTest product: 5W-30 motor oil with XPL+ technology

9

Four Ball Wear Test

Test Method: ASTM D-4172 40kg 1 hour @ 75oCMake & Model: PTI M-4

Base Product: 5W-30 motor oil without XPL+ technologyTest product: 5W-30 motor oil with XPL+ technology

MOTOR OIL WITHOUT XPL+

MOTOR OIL WITH XPL+

Co-efficient of Friction

104,000 P.S.I.4,000 P.S.I. 200,000 P.S.I.200,000 P.S.I.

Bearing Friction Test

Over 50 times more powerful than regular lubricants!

11• Commercial – Heavy duty equipment, commercial trucking, railway & shipping fleets• Industrial – manufacturing, metalworking, mining, paper mills, drilling

Lubricants Applications

12

Priority Markets

• Transportation Sector – Heavy duty equipment, Trucking, Railway & Shipping Fleets

13

Priority Markets

• Industrial Sector – Manufacturing, Construction, Food & Beverage, Water cooling plants, Utility & Power generation plants

14

Priority Markets

• Drilling and Mining Sector -Down hole Drilling, Oil drilling and Mining operations (hard & soft)

15

Priority Markets

• International and Local Supply & Distribution Networks

» Existing supply or customer networks for (Transportation, Industrial, Manufacturing, Drilling & Mining, Oil & gas)

» Existing distributors supplying to end users for (Transportation, Industrial, Manufacturing, Drilling & Mining, Oil & gas)

»Auto supply and service centers, hardware, mass merchandisers & retailers

16

Application ProOne Products Anticipated Results

Machining - i.e. CNC, lathes, grinding, boring, broaching, drilling, tapping, milling, sawing, stamping, etc.

• BioStable (90%) and Synthetic (10%) Water Soluble Cutting Fluids

• ACA Cutting Oil for cutting oil applications

• Industrial Oil Concentrate

• Feeds and speeds increased anywhere from +20% up to +500% depending on application• Tool life extended by as much as 10 fold• Improved surface finishes, eliminating additional finishing steps• Sump life extended by as much as 400%• Down time reduced due to less wear, longer sump life, longer tool life• Energy reduction of 10-20%• Less oxidation and corrosion on equipment, pumps, tanks, etc.

Gear boxes • Industrial Oil Concentrate

• Multi-purpose EP-2 Grease

• Energy savings of 10-20% • Reduction in noise• Wear reduced by 50-75%• Reduction in shear factor

Conveyor systems • Multi-purpose EP-2 Grease

• XPL-101 Penetrating Lubricant

• Energy savings of 10-20%• Protection from outside elements (rust, corrosion protection)• Noise reduction

Hydraulic systems • See hydraulic systems under Diesel Powered Equipment

• See hydraulic systems under Diesel Powered Equipment

Pneumatic air-driven solenoids and air tools

• XPL-101 Penetrating Lubricant • Less downtime due to water/corrosion• Equipment working life extended up to 5 X

Manufacturing

17

Application ProOne Products Anticipated Results

Any and all diesel and gasoline engines including vehicles, generators, etc.

• Heavy Duty Oil Stabilizer

• Engine Life Treatment

• 15W-40 CJ4 Motor Oil

• Oil change intervals extended by up to 50%• Fuel consumption reduced by 5-10%• Reduced oil consumption and oil burning• Improved performance through increased compression• Longer working life due to wear reduction• Less friction, 2-10% more horsepower • More reliability and fewer breakdowns

Logging gear • Hydraulic Treatment

• Multi-purpose EP-2 Grease

• XPL-101 Penetrating Lubricant

• Extended life of drag lines and cables• Increased safety due to extended range of cables• Protection from outside elements (rust, corrosion protection)• Greater reliability, fewer breakdowns, less shop repair

Diesel-powered Equipment

18

Application ProOne Products Anticipated Results

Mud Pumps Hydraulicing slurry

• Down hole Drilling Fluid • Relieve heat, friction & wear on all parts associated with hydraulicing mud/slurry• No disposability problems •Up to 70% reduction in friction• Reduced torque• No diesel fuel added to well• Extended drill bit life• Improved thread protection on pipe sections

All oil hydraulic systems • Hydraulic Treatment

• Multi-purpose EP-2 Grease

• Electrolysis eliminated up to 94%• Electromagnetic field/static wear eliminated• Water contamination in hyd. fluid minimized• Reduction in wear, heat, friction, oxidation, corrosion & acidity • Operating life of the fluid extended 2-4 times• Seals last longer• Less downtime due to wear & tear• Energy reduced 8-15% for light load and up to 33% for heavy load• Less maintenance on all pivot points

Down hole Drilling

19

XPL-101 Penetrating Lubricant

If it rolls, rubs, slides, rusts, corrodes, seizes or collects moisture

…Use XPL-101…

The Best Liquid Tool in the Box 

BOTTOM LINE BENEFITS:

• Xtreme pressure film strength • Lubricates, stops squeaks & noise• Frees sticky/rusted parts• Protects metal from rusting• Retards electrical corrosion• Displaces moisture• Non-toxic, environmentally friendly

20

Synthetic EP-1 Grease

Pumpable Syntheticfrom – 60

oF to 650

oF !

  SUPERIOR PERFORMANCE:

Extreme temperature range Extreme pressure protection Water resistance Oxidation & corrosion resistance Cling capability Seal compatibility Low oil bleed characteristics

REDUCES: Heat, friction, noise & wear Corrosion Downtime Power consumption

APPLICATIONS:

Long lubricant dispensing linesExtreme hot or cold conditions

Wet and hot end use for roll neck journal bearings

Heavily loaded hinge pins, couplings, CV and universal joints

Rolling mills, slabbing millsTruck chassis, wheel bearings,

general lube points

Food

Grade

21

Multipurpose EP-2 Grease

Extreme Performancefrom – 40

oF to 615

oF !

  SUPERIOR PERFORMANCE:

Load carrying ability Shear stability Water resistance Oxidation & corrosion resistance Cling capability Seal compatibility

REDUCES: Heat, friction, noise & wear Corrosion Downtime Power consumption

APPLICATIONS:

IndustrialManufacturing

CommercialMarine

AutomotiveMining

ConstructionAgricultural

Food

Grade

22

Lithium/ Moly Grease

Heavy Duty Lithium Grease With 5% Moly

  

SUPERIOR PERFORMANCE: Extreme pressure protection Heavy load carrying ability Good shear stability Highly resistant to water wash Rust & corrosion inhibitors Cling capability Low oil bleed characteristics Good thermal, oxidative and mechanical stability

IDEAL FOR USE:

Heavily loaded bushings, ball and roller bearings

Heavy duty truck wheel bearings & fifth wheel

Automatic lube systemsBucket pins Swing arms

Chassis pointsSliding surfaces

Turn tablesConveyorsCouplings

REDUCES: Heat, friction, noise & wear Corrosion Downtime Power consumption

23

Industrial Oil Concentrate

Superior Performance for Industrial Applications

 

BOTTOM LINE BENEFITS:

• Extends life of gears, cams & dies• Improves speed & feed rates• Improves surface finishes• Reduces down time• Cuts down wear & tear• Less power consumption• Reduces smoke & noise• Extends machine life

APPLICATIONS

Use at 10% by total volume

Cold-heading Stamping

Slitting machines Threading

Compressors, GeneratorsPumps, Gear boxes

Heavy chains & SprocketsBall & roller bearings

24

Hydraulic Treatment

Unsurpassed Lubrication .. And Environmentally Friendly!

 

APPLICATIONS:

Hydraulic systems Power transmission equipment

Injection molding machines Railroad equipment

Refineries & oil field equipment Paper and pulp mills

Mining & smelter equipmentAutomatic Transmissions

Power steering unitsPumps & Rams

DILUTION RATIOS:

Hydraulic Systems: 10% by volumeWet bath clutches, brakes: 5% by volumeAutomatic transmissions: 2% by volume 

BOTTOM LINE BENEFITS:

• Lowers friction & operating temperatures• Protects against wear• Reduces electrolysis• Displaces moisture• Prevents oxidation & corrosion• Helps extend equipment life• Compatible with petroleum & synthetics • Helps to protect & condition seals• Optimum run times .. less down time

 

25

Engine Life Treatment

Reduces Friction, Heat & Wear

BOTTOM LINE BENEFITS:

• Withstands friction & high temperatures• Protects engine from wear • Prevents oxidation & corrosion• Protects & conditions seals• Extends oil change intervals• Helps optimize engine performance • Maximizes fuel economy• Protects from wear at start-up

 

DIRECTIONS

For 4-6 quart capacity engines pour 12oz into motor oil crankcase.

For larger capacity engines use at 10% by total volume.

26

Heavy Duty Oil Stabilizer

If it Smokes, Burns, Leaks Oil, or Needs Extra Protection

BOTTOM LINE BENEFITS:

• Stops oil burning & oil leaks• Slows blow-by, smoking & oil contamination• Protects against wear to extend engine life• More power with better fuel economy• Provides dry start protection• Easier starting at all temperatures• Increases oil pressure• Conditions seals to extend life• Stops thermal breakdown• Quiets engines & gear boxes• Extends oil life by 50% or more 

DIRECTIONS

% by volume

Regular gas engines 20% Badly worn engines 40% Diesel engines 20% Commercial/Industrial 20% Marine engines 20%

Motorcycle/Marine engines 20%4-stroke motorcycles 10%

with Wet ClutchesManual Transmissions 20%Differential & Gear Boxes 20%

27

ACA Cutting OilAir Craft Approved (ACA) for Titanium 

Cuts tool wear.Cuts downtime. Cuts costs...

 BOTTOM LINE BENEFITS:• Improves speed & feed rates• Reduces down time• Cuts down wear from metal removal• Improves surface finishes • Lowers power consumption• Reduces smoke & noise• Extends machine & tool life• Resistant to foaming• Corrosion resistant 

 For all ferrous and non-ferrous alloys

Ideal for:

• Alloy steel• Stainless steel

• Titanium• Waspalloy

• Inconel• Mild steel• Aluminum

• Copper alloys 

APPLICATIONS:

Screw machinesCNC machining

Lathes Roll threading

Stamping Grinding

Gear hobbing Sawing

Slitting machines Threading

Turning VMC’s

Metalforming 

Use at full-strength 

28

Bio-StableWater Soluble Cutting Fluid

Earth-friendly Formula .. ROI Friendly Performance

BOTTOM LINE BENEFITS:• Increases production rates• Improves tolerances & finish• Extends tool and machine life• Reduces edge buildup, welding & tearing• Extends sump life• Biocides to control rancidity• Retards bacteria and fungus• Reduces down time• Lowers power consumption & noise• Resistant to foaming• Soft & hard water emulsification• Operator friendly – safe, no odors• No extreme hazard disposability issues

 

APPLICATIONS/DILUTION RATIOS

Reaming & Boring 10:1 to 15:1Drilling & Tapping 10:1 to 15:1Milling 10:1 to 15:1Turning 15:1 to 30:1Sawing 15:1 to 30:1Stamping 15:1 to 30:1Grinding 30:1 to 50:1Quenching 30:1 to 50:1

Vegetable

oil based

Biodegrada

ble

29

SyntheticWater Soluble Cutting Fluid

The Ultimate Performance to Improve your Bottom Line

BOTTOM LINE BENEFITS:• Increases speed & feed rates• Improves surface finish• Extends tool life• Reduces edge buildup, welding & tearing• Extends life of cutting solution• Retards bacteria growth• Reduces down time• Lowers power consumption• Cuts down noise• Resistant to foaming• Soft & hard water emulsification• No hazardous ingredients• No harmful vapors

 

APPLICATIONS/DILUTION RATIOS

Reaming & Boring 10:1 to 15:1Drilling & Tapping 10:1 to 15:1Milling 10:1 to 15:1Turning 15:1 to 30:1Sawing 15:1 to 30:1Stamping 15:1 to 30:1Grinding 30:1 to 50:1Quenching 30:1 to 50:1

Water-

based

Synthetic

Downhole Drilling &

Mining

31

Down hole Drilling Fluid

ProOne Knows the Drill  

BOTTOM LINE BENEFITS:

Over 70% reduction in friction Less downtime - more production Extends drill bit life Reduces torque Lowers operating temperatures Eliminates up to 94% of electrolysis Displaces moisture

AND

Biodegradable! No diesel fuel added to well No disposability issues

32

Rock Drilling Oil

BOTTOM LINE BENEFITS:

Extreme pressure protection Reduce friction & lower operating

torque Excellent oxidation resistance High solvency characteristics Prevents sluggish valve action Protect components form running dry Environmentally friendly without lead,

Chlorine, Phosphorus or Antimony

Oil of FAME !!!

Waterless Wash & Shine

34

Waterless Wash & Shine

Cleans, Shines & Protects ...

.. Without Water .... Without Scratching ..

  BOTTOM LINE BENEFITS:

• Only 15 minutes for an average car• No buckets, hose or sponge required• No mess to clean up• Citrus-based formula cleans bugs, tar,

tree sap, bird droppings, water spots• Just-waxed shiny coating beads water

for 4 weeks• For paint, chrome or glass

  

35

Waterless Wash & Shine

WON’T SCRATCH THE FINISH

1. Surrounds and lifts dirt

particles.

2. Wipes off dirt without

scratching

3. Leaves clean, shiny, smooth,

protected finish.

36

SPECIAL REQUESTS

Technology & Products: Technology Demo Video’s

Material Safety Data Sheets

Technology Specifications and Applications

Brochures

CONTACT US Email: admin@pro-one.co.za

Website: www.pro-one.co.za

top related