optibelt product range - images.eniro.com€¦ · in accordance with din 2215 and iso 4184 optibelt...
Post on 25-Aug-2018
219 Views
Preview:
TRANSCRIPT
HigH-TECH maCHinERy REQUiRES HigH-TECH DRiVE TECHnOLOgy.
Since 1948 the OPtibelt company has been manufacturing
a wide variety of drive belts, drawing on more than a century
of experience of working with rubber.
Constant investment in materials research and production
technology as well as growing knowledge about the
constraints associated with various uses have pushed the
boundaries of machine capacity to new limits thanks to further
development of the belt into a high-tech drive system.
© ArnTz OPTIBELT GrOuP, GErmAny
Page 4
Page 8
optibelt RED POWER 3
optibelt RED POWER 3 Classic
Page 9
optibelt BLUE POWER
Page 10
optibelt SK
optibelt VB
Page 11
optibelt KB RED POWER 3
optibelt KB RED POWER 3 Classic
Page 12
optibelt KB BLUE POWER
Page 13
optibelt KB/SK
optibelt KB/VB
Page 14
optibelt PKR/PKB
POWER TRanSmiSSiOn
V-BELTS anD KRafTBanDS
Page 16
optibelt SUPER E-POWER
optibelt SUPER X-POWER
Page 17
optibelt SUPER TX
optibelt SUPER KBX-POWER
Page 18
optibelt KBX
optibelt VaRiO POWER
POWER TRanSmiSSiOn
RaW EDgE V-BELTS anD KRafTBanDS
Page 20
optibelt OmEga HP
optibelt OmEga HL
Page 21
optibelt OmEga
optibelt OmEga fan POWER
Page 22
optibelt HTD
optibelt STD
Page 23
optibelt ZR
optibelt OmEga Double-sided
Page 24
optibelt HTD Double-sided
optibelt STD Double-sided
optibelt ZR Double-sided
Page 25
optibelt OmEga HP LinEaR
optibelt OmEga LinEaR
Page 26
optibelt HTD LinEaR
optibelt ZR LinEaR
POWER TRanSmiSSiOn
CHLOROPREnETiming BELTS
Page 34
optibelt DELTa CHain Carbon
optibelt aLPHa POWER
Page 35
optibelt aLPHa TORQUE
Page 36
optibelt aLPHa fLEX
optibelt aLPHa LinEaR / V
Page 37
optibelt aLPHa SPECiaL
Page 39
optibelt aLPHa SRP
Page 40
optibelt aLPHa ZS/ZSi
optibelt aLPHa PinJOin
maTERiaL HanDLing
POLyURETHanETiming BELTS
Page 5
© ArnTz OPTIBELT GrOuP, GErmAny
Page 42
optibelt maRaTHOn 1
optibelt RBK
Page 43
optibelt ZRK
optibelt KiT
Page 44
optibelt TRUCK POWER maRaTHOn 2
optibelt TRUCK POWER RBK
Page 45
optibelt TRUCK POWER KBX
optibelt TRUCK POWER KiT
SERViCE TOOLS
Page 46
optibelt TT-a
optibelt mT-a/mT-a ii
Page 47
optibelt OPTiKRiK 0, i, ii, iii
optibelt mEaSURing gaUgE
optibelt LaSER POinTER ii
aUTOmOTiVE TECHnOLOgy
DRiVE BELTS fOR mOTOR VEHiCLES
Page 50
optibelt RB
Page 51
optibelt DK
optibelt RR/RR Plus/KK
Page 52
optibelt OE/DK/fK
optibelt PKR
POWER TRanSmiSSiOn
BELTS fOR SPECiaL DRiVE SOLUTiOnS
Page 54
optibelt ELaSTOmiT
TECHniCaL
ELaSTOmER SHEETing
optibelt ELaSTOmiT
X-Ray PROTECTiOn
Page 55
fiTnESS anD
THERaPy BanDS
ELaSTOmER SOLUTiOnS
TECHniCaLELaSTOmER fOiLS
OPTiBELT PRODUCT WORLD
Page 58optibelt KRSoptibelt ZRS
Page 59optibelt ZRS DCoptibelt RBS
Page 60 optibelt SPECiaL PULLEyS
Page 60optibelt mETaL aCCESSORiES
Page 61optibelt TBoptibelt CE
PULLEyS anDBUSHES
From Page 64 SERViCE TOOLS PROfESSiOnaL TOOLS fOR inSTaLLaTiOn anD mainTEnanCE
Page 33 – 36 OVERViEW Of OUR PRODUCTS
Page 6
OPTiBELT POWER TRanSmiSSiOn
OPTIBELT offers the highest technological quality in the form
of customized drive solutions and industry specific products.
More than 10,000 of these can be delivered to anywhere in
the world within 24 hours.
From extremely large to extremely small: OPTIBELT supplies
V-belts, timing belts, ribbed belts, kraftbands and tailored
products for every application, whether in oil production
facilities, fans or sewing machines.
We have the right solution for every application, such
as our optibelt RED POWER 3 V-belts with best quality,
guaranteed reliability and maintenance-free operation.
To keep your machinery running when it needs to.
Page 7
V-BELTSanD KRafTBanDS
“Maintenance– free.” Norbert, 42, Foreman
Page 8optibelt RED POWER 3 HIgH PErfOrMancE wEdgE BELTsoptibelt RED POWER 3 Classic HIgH PErfOrMancE V-BELTs
Page 9optibelt BLUE POWER HIgH PErfOrMancE wEdgE BELTs
Page 10optibelt SK HIgH PErfOrMancE wEdgE BELTsoptibelt VB cLassIc V-BELTs
Page 11 optibelt KB RED POWER 3 HIgH PErfOrMancE krafTBandsoptibelt KB RED POWER 3 Classic HIgH PErfOrMancE krafTBands
Page 12optibelt KB BLUE POWER HIgH PErfOrMancE krafTBands
Page 13optibelt KB/SK krafTBandsoptibelt KB/VB krafTBands wITH cLassIc V-BELTs
Page 14optibelt PKR/PKB V-BELTs and krafTBands
POWER TRanSmiSSiOn
© ArnTz OPTIBELT GrOuP, GErmAny
Page 8
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
maintenance- free
maintenance- free
DimEnSiOnS
SPZSPASPbSPC
3V / 9N5V / 15N8V / 25N
1202 – 3550 mm1207 – 4000 mm1250 – 8000 mm2000 – 10 000 mm47.5 – 140 inches53 – 315 inches100 – 475 inches
Further sizes upon request
DimEnSiOnS
A / 13b / 17
1320 – 4000 mm1320 – 4000 mm
Further sizes upon request
optibelt RED POWER 3S=C PlusHigH PERfORmanCE WEDgE BELTSmaintenance-free in accordance with DIn 7753 Part 1,ISO 4184 and rmA / mPTA
optibelt RED POWER 3 Classic S=C PlusHigH PERfORmanCE V-BELTSmaintenance-free in accordance with DIn 2215 / ISO 4184, available on request
V-BELTS anD KRafTBanDS
Page 9
© ArnTz OPTIBELT GrOuP, GErmAny
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
SPbSPC
8V / 25N
1500 – 8000 mm2000 – 9000 mm160 – 355 inches
Further sizes upon request
optibelt BLUE POWERHigH PERfORmanCE WEDgE BELTSwith aramid cordDIn 7753 Part 1, ISO 4184 and rmA / mPTA
OPTiBELT SUCCESS STORy
mETSO minERaLS – BEST BELT fOUnDmetso minerals produces systems and machinery in 50 production facilities around the world and has sales centres in more than 100 countries.
“optibelt rEd POwEr 3 products,” says Tero majuri, development engineer at metso minerals, “are the fi rst choice when it comes to fi nding the right belt.” Since breaking up and crushing calls for powerful drives then equally high-quality belts are needed too. “We have found the rED POWEr 3 from OPTIBELT to be the best belts for our new generation of impact and jaw crushers.”
POWER TRanSmiSSiOn
Page 10
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
SPZSPASPbSPC
3V / 9N5V / 15N8V / 25N
487 – 3550 mm732 – 4500 mm1250 – 8000 mm2000 – 12 500 mm25 – 140 inches53 – 355 inches100 – 500 inches
Further sizes upon request
DimEnSiOnS
5y / 6
8Z / 10A / 13b / 17
20C / 22
25D / 32e / 40
200 – 610 mm295 – 865 mm335 – 1270 mm312 – 2522 mm437 – 5030 mm610 – 7140 mm950 – 6050 mm1148 – 8058 mm1460 – 9060 mm2075 – 11 275 mm3080 – 12 580 mm
Further sizes upon request
optibelt SK S=C PlusHigH PERfORmanCE WEDgE BELTSDIn 7753 Part 1, ISO 4184 and rmA / mPTA
optibelt VB S=C PlusCLaSSiC V-BELTSDIn 2215 / iSO 4184
V-BELTS anD KRafTBanDS
Page 11
© ArnTz OPTIBELT GrOuP, GErmAny
krafTBand PuLLEysall standard pulleys,special pulleys on request
krafTBand PuLLEysall standard pulleys,special pulleys on request
maintenance- free
maintenance- free
DimEnSiOnS
SPbSPC
3V / 9J5V / 15J8V / 25J
2000 – 8000 mm3000 – 10 000 mm50 – 140 inches56 – 315 inches100 – 475 inches
DimEnSiOnS
b 1320 – 4000 mm
Further sizes upon request
optibelt KB RED POWER 3HigH PERfORmanCE KRafTBanDSmaintenance-free
optibelt KB RED POWER 3 ClassicHigH PERfORmanCE KRafTBanDSmaintenance-free
POWER TRanSmiSSiOn
Page 12
krafTBand PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
SPbSPC
5V / 15J8V / 25J
2000 – 8000 mm3000 – 10 000 mm80 – 315 inches100 – 475 inches
optibelt KB BLUE POWERHigH PERfORmanCE KRafTBanDSwith aramid cord
OPTiBELT SUCCESS STORy
aUSTRaLian ORE minE OPERaTOR TRUSTS gERman QUaLiTyThe belts in the circulation pumps in a remote iron ore mine in Australia needed be replaced every 8 - 10 weeks, generating enormous downtime.
After a general refurbishment and the installation of optibelt BLuE POwEr high performance V-belts the number of belts and pulleys could be reduced from 14 to 8. material cost savings and a signifi cant reduction of downtime generated higher profi tability for the ore mine.
The installed OPtibelt V-belts have been running now for approximately 23 weeks without any maintenance and without any downtime.
V-BELTS anD KRafTBanDS
Page 13
© ArnTz OPTIBELT GrOuP, GErmAny
krafTBand PuLLEysall standard pulleys,special pulleys on request
krafTBand PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
SPZSPASPbSPC
3V / 9J5V / 15J8V / 25J
1250 – 3550 mm1250 – 4500 mm2000 – 8000 mm3000 – 12 500 mm50 – 140 inches56 – 355 inches100 – 475 inches
DimEnSiOnS
A / HAb / HbC / HCD / HD
1200 – 4750 mm1200 – 5600 mm2286 – 6300 mm2500 – 17 780 mm
optibelt KB/SKKRafTBanDS
optibelt KB/VBKRafTBanDS WiTH CLaSSiC V-BELTS
POWER TRanSmiSSiOn
Page 14
krafTBand PuLLEysall standard pulleys,special pulleys on request
PKR 0PKR 0 PKR 1PKR 1 PKR 2PKR 2 PKR 3PKR 3
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
Sections and dimensions available on request
DimEnSiOnS
Sections and dimensions available on request
optibelt PKR/PKBV-BELTS anD KRafTBanDS WiTH TOP SURfaCES
VErsIOns • Top surfaces with various shore hardnesses • Top surfaces in various colours • Top surfaces for various temperature ranges • Application-specifi c top surfaces
optibelt V-BELTSCustomized solutionsWEDgE BELTS
V-BELTS anD KRafTBanDS
© ArnTz OPTIBELT GrOuP, GErmAny
Page 16 optibelt SUPER E-POWER HIgH PErfOrMancE wEdgE BELTsoptibelt SUPER X-POWER HIgH PErfOrMancE wEdgE BELTs
Page 17 optibelt SUPER TX cLassIc V-BELTsoptibelt SUPER KBX-POWER HIgH PErfOrMancE krafTBands
Page 18 optibelt KBX krafTBandsoptibelt VaRiO POWER VarIaBLE sPEEd BELTs
RaW EDgE V-BELTS anD KRafTBanDS
Page 16
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
XPZXPAXPbXPC
3VX / 9NX5VX / 15NX
587 – 3550 mm707 – 3550 mm1250 – 3550 mm2000 – 3550 mm25 – 140 inches50 – 140 inches
DimEnSiOnS
XPZXPAXPbXPC
3VX / 9NX5VX / 15NX
587 – 3550 mm707 – 3550 mm1250 – 3550 mm2000 – 3550 mm25 – 140 inches50 – 140 inches
optibelt SUPER E-POWER m=SHigH PERfORmanCE WEDgE BELTSraw edge, moulded coggedin accordance with DIn 7753 Part 1, ISO 4184 and rmA / mPTA
optibelt SUPER X-POWER m=SHigH PERfORmanCE WEDgE BELTSraw edge, moulded coggedin accordance with DIn 7753 Part 1, ISO 4184 and rmA / mPTA
RaW EDgE V-BELTS anD KRafTBanDS
Page 17
© ArnTz OPTIBELT GrOuP, GErmAny
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
krafTBand PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
ZX / X10AX / X13bX / X17
CX / X22
597 – 1522 mm605 – 3380 mm610 – 3390 mm1058 – 3408 mm
DimEnSiOnS
XPZXPAXPb
3VX / 9JX5VX / 15JX
on requeston requeston request50 – 140 inches50 – 140 inches
optibelt SUPER TX m=SCLaSSiC V-BELTSraw edge, moulded coggedin accordance with DIn 2215 and ISO 4184
optibelt SUPER KBX-POWERHigH PERfORmanCE KRafTBanDSraw edge, moulded cogged
POWER TRanSmiSSiOn
Page 18
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
krafTBand PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
13 x 5 – 70 x 181422 V – 4436 V
468 – 2500 mm235 – 750 inches
DimEnSiOnS
Sections and dimensions available on request
optibelt KBXKRafTBanDSraw edge, moulded cogged
optibelt VaRiO POWERVaRiaBLE SPEED BELTSraw edge, moulded cogged,standard dimensions as defi ned in DIn / ISO and rmA / mPTA
also available as double-sided belts
RaW EDgE V-BELTS anD KRafTBanDS
© ArnTz OPTIBELT GrOuP, GErmAny
Page 20optibelt OmEga HP HIgH PErfOrMancE TIMIng BELTsoptibelt OmEga HL HIgH PErfOrMancE TIMIng BELTs
Page 21optibelt OmEga TIMIng BELTsoptibelt OmEga fan POWER HIgH PErfOrMancE TIMIng BELTs
Page 22optibelt HTD TIMIng BELTsoptibelt STD TIMIng BELTs
Page 23optibelt ZR TIMIng BELTsoptibelt OmEga DOUBLE-SiDED TIMIng BELTs
Page 24optibelt HTD DOUBLE-SiDED TIMIng BELTs optibelt STD DOUBLE-SiDED TIMIng BELTsoptibelt ZR DOUBLE-SiDED TIMIng BELTs
Page 25optibelt OmEga HP LinEaR OPEn-EndEd HIgH PErfOrMancE TIMIng BELTsoptibelt OmEga LinEaR OPEn-EndEd TIMIng BELTs
Page 26optibelt HTD LinEaR OPEn-EndEd TIMIng BELTsZR LinEaR OPEn-EndEd TIMIng BELTs
CHLOROPREnE Timing BELTS
Page 20
TIMIng BELT PuLLEysoptibelt OmEGA timing belts run in standard HTD and rPP pulleys
TIMIng BELT PuLLEysoptibelt OmEGA timing belts run in standard HTD and rPP pulleys
HTD / rPP
HTD / rPP
DimEnSiOnS
3m HP5m HP8m HP
14m HP
111 – 1569 mm180 – 2525 mm288 – 3280 mm966 – 4578 mm
DimEnSiOnS
8m HL14m HL
288 – 3280 mm966 – 2800 mm
optibelt OmEga HPHigH PERfORmanCE Timing BELTS maintenance-free
also available as EPDm timing belts
optibelt OmEga HLHigH PERfORmanCE Timing BELTSmaintenance-free, with fi breglass cords
CHLOROPREnE Timing BELTS
Page 21
© ArnTz OPTIBELT GrOuP, GErmAny
TIMIng BELT PuLLEysoptibelt OmEGA timing belts run in standard HTD and rPP pulleys
TIMIng BELT PuLLEysoptibelt OmEGA timing belts run in standard HTD and rPP pulleys
HTD / rPP
HTD / rPP
DimEnSiOnS
2m3m5m8m
14m
74 – 1224 mm111 – 1863 mm120 – 2525 mm288 – 4400 mm966 – 4578 mm
DimEnSiOnS
8m FP14m FP
2000 – 2800 mm3150 – 4578 mm
Further sizes upon request
optibelt OmEgaTiming BELTSpowerful and universal maintenance-free
optibelt OmEga fan POWERHigH PERfORmanCE Timing BELTSfor ventilation operations, anti-static, maintenance-free
also available as EPDm timing belts
POWER TRanSmiSSiOn
Page 22
TIMIng BELT PuLLEys optibelt Zrsstandard timing belt pulleys HTD
TIMIng BELT PuLLEys optibelt Zrsstandard timing belt pulleys STD
DimEnSiOnS
20m 2000 – 6600 mm
DimEnSiOnS
S3mS5mS8m
S14m
120 – 633 mm255 – 2000 mm440 – 3200 mm1400 – 5012 mm
optibelt STD also available in HP or HL quality
optibelt HTD Timing BELTS maintenance-free
optibelt STD Timing BELTSmaintenance-free
CHLOROPREnE Timing BELTS
Page 23
© ArnTz OPTIBELT GrOuP, GErmAny
TIMIng BELT PuLLEys optibelt Zrs standard timing belt pulleys
TIMIng BELT PuLLEysoptibelt OmEGA timing belts run in standard HTD and rPP pulleys
HTD / rPP
DimEnSiOnS
D2mD3mD5mD8m
D14m
on requeston request1000 – 2525 mm1000 – 3280 mmon request
Further sizes upon request
DimEnSiOnS
mXLXll
HXH
XXH
91.44 – 1026.16 mm152.40 – 1600.20 mm276.23 – 1676.40 mm584.20 – 4318.00 mm1289.05 – 4445.00 mm1778.00 – 4572.00 mm
optibelt ZR Timing BELTSclassic profi le, maintenance-free
optibelt OmEga Double-sidedTiming BELTSdouble-sided, maintenance-free
POWER TRanSmiSSiOn
Page 24
TIMIng BELT PuLLEys optibelt Zrs standard timing belt pulleys
TIMIng BELT PuLLEys optibelt Zrsstandard timing belt pulleys
DimEnSiOnS
D5mD8m
D14mDS8m
565 – 1200 mm600 – 2800 mm966 – 2310 mm1160 – 1776 mm
DimEnSiOnS
DXLDL
DH
381 – 787 mm476 – 1524 mm609 – 4318 mm
optibelt HTD and STD Double-sidedTiming BELTS double-sided, maintenance-free
optibeltZR Double-sidedTiming BELTSdouble-sided, classic profi le, maintenance-free
CHLOROPREnE Timing BELTS
Page 25
© ArnTz OPTIBELT GrOuP, GErmAny
TIMIng BELT PuLLEysoptibelt OmEGA timing belts run in standard HTD and rPP pulleys
HTD / rPP
TIMIng BELT PuLLEysoptibelt OmEGA timing belts run instandard HTD and rPP pulleys
HTD / rPP
DimEnSiOnS
3m5m8m
9 mm10 – 25 mm10 – 30 mm
DimEnSiOnS
3m HP5m HP8m HP
6 – 15 mm10 – 25 mm10 – 30 mm
Standard roll length 30 m
optibelt OmEga HP LinEaROPEn-EnDED HigH PERfORmanCE Timing BELTSmaintenance-free
optibelt OmEga LinEaROPEn-EnDED Timing BELTSmaintenance-free
POWER TRanSmiSSiOn
Page 26
TIMIng BELT PuLLEysoptibelt Zrsstandard timing belt pulleys HTD
TIMIng BELT PuLLEys optibelt Zrs standard timing belt pulleys
DimEnSiOnS
fIBrEgLass TEnsIOn cOrd
3m 6 – 15 mm
fIBrEgLass Or sTEEL TEnsIOn cOrd
5m8m
14m
6 – 25 mm10 – 85 mm25 – 85 mm
Standard roll length 30 m
DimEnSiOnS
fIBrEgLass TEnsIOn cOrd
mXL 6.35 mm
fIBrEgLass Or sTEEL TEnsIOn cOrd
Xll
H
6.35 – 12.70 mm9.53 – 25.40 mm12.70 – 50.80 mm
Standard roll length 30 m
optibelt HTD LinEaROPEn-EnDED Timing BELTS maintenance-free
optibelt ZR LinEaROPEn-EnDED Timing BELTSclassic profi le, maintenance-free
CHLOROPREnE Timing BELTS
POLYURETHANETIMING BELTS
“It’s a matter of trust.” Paul, 46, Chief Engineer
Page 34optibelt DELTA CHAIN Carbon HIGH PERFORMANCE TIMING BELTSoptibelt ALPHA POWER TIMING BELTS
Page 35optibelt ALPHA TORQUE TIMING BELTS
Page 36optibelt ALPHA FLEX TIMING BELTSoptibelt ALPHA LINEAR/V TIMING BELTS BY THE METRE
Page 37optibelt ALPHA SPECIAL TIMING BELTS
Page 39optibelt ALPHA SRP TIMING BELTS
Page 40optibelt ALPHA ZS/ZSI TIMING BELT LOCK optibelt ALPHA PINJOIN TIMING BELT LOCK
© ARNTZ OPTIBELT GROUP, GERMANY
OVERVIEW PRODUCT RANGEOPTIBELT
“Maintenance- free.” Norbert, 42, Foreman
“So your car purrs like a kitten.” Michael, 33, Mechatronics Technician
Page 29
Page 9, 12
optibelt BLUE POWERHIGH PERFORMANCE WEDGE BELTSwith aramid cord
optibelt KB BLUE POWERHIGH PERFORMANCE KRAFTBANDSwith aramid cord
Page 10, 13
optibelt SK S=C PlusHIGH PERFORMANCE WEDGE BELTS wrapped
optibelt VB S=C PlusCLASSIC V-BELTS wrapped
optibelt KB/SKKRAFTBANDS wrapped
optibelt KB/VBKRAFTBANDS wrapped
Page 17, 18
optibelt SUPER KBX-POWERHIGH PERFORMANCE KRAFTBANDS raw edge, moulded cogged
optibelt KBXKRAFTBANDSraw edge, moulded cogged
Page 18
optibelt VARIO POWERVARIABLE SPEED BELTSraw edge, moulded cogged
Also available as double-sided belts
Page 8, 11
optibelt RED POWER 3S=C PlusHIGH PERFORMANCE WEDGE BELTS AND HIGH PERFORMANCE V-BELTSmaintenance-free
optibelt KB RED POWER 3HIGH PERFORMANCE KRAFTBANDSmaintenance-free
Page 16, 17
optibelt SUPER E-POWERHIGH PERFORMANCE WEDGE BELTSraw edge and moulded cogged
optibelt SUPER X-POWERHIGH PERFORMANCE WEDGE BELTSraw edge and moulded cogged
optibelt SUPER TX CLASSIC V-BELTSraw edge and moulded cogged
V-BELTS AND KRAFTBANDS
Page 30
Page 20
optibelt OMEGA HPHIGH PERFORMANCE TIMING BELTSmaintenance-free
optibelt OMEGA HLHIGH PERFORMANCE TIMING BELTSmaintenance-free
Page 21
optibelt OMEGATIMING BELTSpowerful and universalmaintenance-free
optibelt OMEGA FAN POWERHIGH PERFORMANCE TIMING BELTSmaintenance-free
Page 22 – 23
optibelt HTDTIMING BELTS
optibelt STDTIMING BELTS
optibelt ZRTIMING BELTS
Page 23 – 24
optibelt OMEGADouble-sidedTIMING BELTS
optibelt HTDDouble-sidedTIMING BELTS
Page 24
optibelt STDDouble-sidedTIMING BELTS
optibelt ZRDouble-sidedTIMING BELTS
Page 25 – 26
optibelt OMEGA HP LINEARoptibelt OMEGA LINEARoptibelt HTD LINEARoptibelt ZR LINEAROPEN-ENDED TIMING BELTSmaintenance-free
CHLOROPRENE TIMING BELTS
Page 31
Page 34
optibelt DELTA CHAIN CarbonHIGH PERFORMANCE TIMING BELTS
optibelt ALPHA POWERTIMING BELTS metric, inch and double-sided
Page 35
optibelt ALPHA TORQUETIMING BELTS metric, inch and double-sided
Page 36
optibelt ALPHA FLEXTIMING BELTSendless
optibelt ALPHA LINEAR/VTIMING BELTS by the metre (linear), welded endless or as fl at belts
Page 37 – 38
optibelt ALPHA SPECIALSPECIAL TIMING BELTS for transport• with cleats• with coatings• with mechanical working
optibelt ALPHA SPECIALcustomized solutions
Page 39
optibelt ALPHA SRPSPECIAL POLYURETHANE BELTS
Page 40
optibelt ALPHA ZS/ZSITIMING BELT LOCK
optibelt PINJOINTIMING BELT LOCK
POLYURETHANE TIMING BELTS
Page 42 – 45
optibelt CAR POWERoptibelt TRUCK POWERAUTOMOTIVE DRIVE BELTS for cars and commercial vehicles
Page 50
optibelt RBRIBBED BELTS
optibelt RBELASTIC RIBBED BELTS maintenance-free
Page 51
optibelt DKDOUBLE V-BELTS
optibelt RR/RR Plus/KKPLASTIC BELTSPLASTIC V-BELTS
Page 52
optibelt OPTIMAT OE/DK/FKOPEN-ENDED V-BELTS
optibelt OPTIMAT PKROPEN-ENDED V-BELTS with top surface
Page 54
optibelt ELASTOMIT TECHNICAL ELASTOMER SHEETING
optibelt ELASTOMIT X-RAY PROTECTION
Page 55
FITNESS AND THERAPY BANDS
V-BELTS, RIBBED BELTS, TIMING BELTS AND ELASTOMER FOILS
From Page 64 SERVICE TOOLS PROFESSIONAL TOOLS FOR INSTALLATION AND MAINTENANCE
Page 58 – 61 PULLEYS AND BUSHESRANGE
© ARNTZ OPTIBELT GROUP, GERMANY
“It’s a matter of trust.” Paul, 46, Chief Engineer
“Because the quality is the best.” David, 50, Buyer
TIMING BELT PULLEYS DC all standard pulleys,special pulleys on request
TIMING BELT PULLEYS all standard pulleys,special pulleys on request
Page 34
8
5,9
3,4
DIMENSIONS
TIMING BELTS METRIC
T2,5T5
T10AT5
AT10
120 – 950 mm165 – 1440 mm260 – 2250 mm225 – 1500 mm500 – 1940 mm
DOUBLE-SIDED TIMING BELTS
DT5DT10
300 – 1100 mm260 – 1880 mm
Further sizes upon request
DIMENSIONS
8MDC
Dimensions on request
optibelt DELTA CHAIN CarbonHIGH PERFORMANCE TIMING BELTS
optibelt ALPHA POWERTIMING BELTS metric, inch and double-sided
POLYURETHANE TIMING BELTS
TIMIng BELT PuLLEys all standard pulleys,special pulleys on request
Page 35
DimEnSiOnS
TIMIng BELTs METrIc
T2,5 t5
t10 At5
At10mXL
Xll
120 – 950 mm165 – 1440 mm260 – 2250 mm225 – 1500 mm500 – 1940 mm2.40 – 32.00 inches6.00 – 67.00 inches12.38 – 60.00 inches
dOuBLE-sIdEd TIMIng BELTs
DT5DT10
300 – 1100 mm260 – 1880 mm
Further sizes upon request
optibelt aLPHa TORQUETiming BELTSmetric, inch and double-sided
maTERiaL HanDLing
© ArnTz OPTIBELT GrOuP, GErmAny
TIMIng BELT PuLLEysall standard pulleys,special pulleys on request
TIMIng BELT PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
LInEar TIMIng BELTs
XL, L, H, XH5m, 8m, 14mT5, T10, T20
AT5, AT10, AT20
fLaT BELTs
F2F3
Standard roll length 50 m
DimEnSiOnS
t5t10t20At5
At10At20
5m8m
14m
1500 – 24 000 mm1500 – 24 000 mm1500 – 24 000 mm1500 – 24 000 mm1500 – 24 000 mm1500 – 24 000 mm1500 – 24 000 mm1504 – 24 000 mm1512 – 24 000 mm
Lengths > 24 000 mm upon request
optibelt aLPHa fLEXTiming BELTSendless
optibelt aLPHa LinEaR/VTiming BELTSby the metre (linear), welded endless or as fl at belts
POLyURETHanE Timing BELTS Page 36
Page 37
© ArnTz OPTIBELT GrOuP, GErmAny
TIMIng BELT PuLLEys all standard pulleys, special pulleys on request
TIMIng BELT PuLLEys all standard pulleys, special pulleys on request
DimEnSiOnS
Sections and dimensions available on request
DimEnSiOnS
Sections and dimensions available on request
optibelt aLPHa SPECiaLTiming BELTS with cleats (welded or screwed)
optibelt aLPHa SPECiaLTiming BELTSwith coatings (rear)
maTERiaL HanDLing
Page 38
TIMIng BELT PuLLEysall standard pulleys, special pulleys on request
TIMIng BELT PuLLEysall standard pulleys, special pulleys on request
DimEnSiOnS
Sections and dimensions available on request
DimEnSiOnS
Sections and dimensions available on request
optibelt aLPHa SPECiaLTiming BELTSwith mechanical working (punching, machining, and sanding)
optibelt aLPHa SPECiaLTiming BELTScustomized solutions
POLyURETHanE Timing BELTS
Page 39
© ArnTz OPTIBELT GrOuP, GErmAny
TIMIng BELT PuLLEysall standard pulleys, special pulleys on request
DimEnSiOnS
T2.5, T5, T10, T20, AT5, AT10, AT20, mXL, XL, L
Dimensions on request
optibelt aLPHa SRPTiming BELTScustomized solutions
maTERiaL HanDLing
Page 40
TIMIng BELT PuLLEys all standard pulleys,special pulleys on request
TIMIng BELT PuLLEys all standard pulleys,special pulleys on request
DimEnSiOnS
25 AT10, 32 AT10, 50 AT10
Additional profi les, intermediate widths and widths greater
than 50 mm on request
DimEnSiOnS
25 AT10, 32 AT10, 50 AT1025 T10, 32 T10, 50 T1025,4 H, 38,1 H, 50,8 H
Additional intermediate widths and widths greater than 50 mm on request
optibelt aLPHa PinJOinTiming BELT LOCK
optibelt aLPHa ZS/ZSiTiming BELT LOCK
POLyURETHanE Timing BELTS
© ArnTz OPTIBELT GrOuP, GErmAny
DRiVE BELTS fOR mOTOR VEHiCLES
Page 42optibelt maRaTHOn 1 V-BELTsoptibelt RBK rIBBEd BELTs
Page 43optibelt ZRK TIMIng BELTsoptibelt KiT rEPaIr sETs
Page 44optibelt TRUCK POWER maRaTHOn 2 V-BELTsoptibelt TRUCK POWER RBK rIBBEd BELTs
Page 45optibelt TRUCK POWER KBX krafTBandsoptibelt TRUCK POWER KiT rEPaIr sETs
SERViCE TOOLS
Page 46optibelt TT-a TEnsIOn MEasurIng dEVIcEoptibelt mT-a/mT-a ii InsTaLLaTIOn TOOLs
Page 47optibelt OPTiKRiK 0, i, ii, iii BELT TEnsIOn MEasurIng dEVIcEoptibelt mEaSURing gaUgE optibelt LaSER POinTER ii aLIgnMEnT Of BELT drIVEs
“So your car purrs like a kitten.” michael, 33, mechatronics Technician
Page 42
JasO E107 : 2000All standard sections / lengths available
saE J636All standard sections / lengths available
SECTiOnS
AVX 10 , AVX 13 , AVX 11 , AVX 11,2 , AVX 11,5 , AVX 11.9
The sections AVX 10 and AVX 13 have cross sections and dimensions compliant with DIn 7753 as well as standards ISO 2709 and SAE.
SECTiOnS
PJ , PK , DPK , EPK
All standard sections / lengths available
optibelt maRaTHOn 1V-BELTSraw edge, moulded cogged
optibelt RBKRiBBED BELTSstandard and elastic
DRiVE BELTS fOR mOTOR VEHiCLES
Page 43
© ArnTz OPTIBELT GrOuP, GErmAny
cHOIcE Of sEcTIOns
SECTiOnS
Sections and dimensions available on request
DimEnSiOnS
Available range for all standard car models
optibelt ZRKTiming BELTS
optibelt KiTREPaiR SETS fOR VEHiCLESwith and without water pumps
aUTOmOTiVE TECHnOLOgy
Page 44
SECTiOnS
AVX 10, AVX 13, AVP 13
All standard sections / lengths available
SECTiOnS
PK
All standard sections / lengths available
optibelt TRUCK POWERmaRaTHOn 2 m=SV-BELTSraw edge, moulded cogged, m=S usable in unmeasured sets
optibelt TRUCK POWER RBKRiBBED BELTS
DRiVE BELTS fOR mOTOR VEHiCLES
Page 45
© ArnTz OPTIBELT GrOuP, GErmAny
DimEnSiOnS
Available range for all standard commercial vehicle models
SECTiOnS
AVX 10 – 2 ribsAVX 13 – 2 ribs
XPb – 2 ribs
All standard sections / lengths available
optibelt TRUCK POWER KBXKRafTBanDSraw edge, moulded cogged
optibelt TRUCK POWER KiTREPaiR SETS fOR VEHiCLES
aUTOmOTiVE TECHnOLOgy
Page 46
optibelt TT-aTension measuring devicefREQUEnCy mEaSURing DEViCEfor the universal measurement of tension in timing belts and ribbed belts
rangE Of MEasurEMEnT • 30 – 520 Hz
optibelt mT-a iiinSTaLLaTiOn TOOLSfor the safe installation of elastic ribbed belts.Special tool for Ford, mazda and Volvo.
optibelt mT-ainSTaLLaTiOn TOOLSfor the safe installation of elastic ribbed belts
DRiVE BELTS fOR mOTOR VEHiCLES
Page 47
© ArnTz OPTIBELT GrOuP, GErmAny
optibelt OPTiKRiK 0, i, ii, iiiBELT TEnSiOn mEaSURing DEViCEtests reliably whether the V-belt, the kraftband or the ribbed belt has the proper tension
optibelt mEaSURing gaUgEfor V-belts, timing belts and ribbed belts rangE Of MEasurEMEnT
• 500 – 2500 mm interior length (Li)
optibelt LaSER POinTER iiaiDS THE aLignmEnT Of BELT DRiVES
It also helps to determine the three most common causes of drive failures:
• the axial misalignment of the pulleys• the horizontal angle deviation• the vertical angle deviation
aUTOmOTiVE TECHnOLOgy
Page 48
TECDOC HigH PRECiSiOn DaTa TRanSfER – OPTiBELT iS a “TECDOC CERTifiED DaTa SUPPLiER”.
TecDoc supplies workshops and trade with up-to-date and com-prehensive data to identify and order parts for both cars and commercial vehicles. The information is provided directly from the data bases of vehicle part manufacturers in standardised catalogue form. As a particularly reliable TecDoc partner, which meets all of the necessary quality criteria in every possible aspect, OPtibelt was granted the “TecDoc Certified Data Supplier” seal of approval.
PaRTSLifEOPTiBELT SEES EnViROnmEnTaL PROTECTiOn aS mORE THan aDHEREnCE TO LEgaL REQUiREmEnTS.
The question is: How can ecological, economical and social re-sponsibility be brought together? Thanks to the Partslife manage-ment system developed with the automotive parts industry in mind OPTIBELT has a reliable environmental protection system at its side.
aT TOP SPEEDAt OPTIBELT the highest quality standards come first. We are always working hard to exceed the guidelines. We have a strictly certified environmental management system and we always pay close attention to quality, the environment and safety. Making sure that our products are always the right decision.
CERTifiCaTiOn
© ArnTz OPTIBELT GrOuP, GErmAny
BELTS fOR SPECiaL DRiVE SOLUTiOnS
Page 50optibelt RB rIBBEd BELTsoptibelt RB ELasTIc rIBBEd BELTs
Page 51 optibelt DK dOuBLE V-BELTsoptibelt RR/RR Plus/KK
Page 52optibelt OE/DK/fK OPEn-EndEd V-BELTsoptibelt PKR OPEn-EndEd V-BELTs
Page 50
rIBBEd BELT PuLLEysstandard range, special pulleys on request
rIBBEd BELT PuLLEysstandard range, special pulleys on request
DimEnSiOnS
ePHePJ
700 – 2200 mm280 – 2500 mm
Further sizes upon request
DimEnSiOnS
PHPJPKPl
Pm
698 – 2155 mm280 – 2489 mm630 – 2845 mm954 – 6096 mm2286 – 15 266 mm
Further sizes upon request
optibelt RBRiBBED BELTS
optibelt RBELaSTiC RiBBED BELTS maintenance-free
BELTS fOR SPECiaL DRiVE SOLUTiOnS
Page 51
© ArnTz OPTIBELT GrOuP, GErmAny
V-grOOVEd PuLLEys
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
DimEnSiOnS
AA / HAAbb / Hbb
CC / HCCDD / HDD
22 x 2225 x 22
2000 – 3920 mm1980 – 5639 mm2280 – 5750 mmon request5180 – 6270 mmon request
Further sizes upon request
DimEnSiOnS
optibelt rr / rr Plus (rOLL LEngTHs)
23456* 7*
200 m200 m200 m200 m100 m100 m
8*10*12*15*18
100 m100 m50 m50 m30 m
optibelt kk (sEcTIOns)
8, z / 10, A / 13, B / 17, C / 22
* also with tension cord
optibelt DKDOUBLE V-BELTSDIn 7722
optibeltRR/RR Plus/KKoptibelt RR / RR Plusround plastic belts without and with tension cord
optibelt KK plastic V-belts
POWER TRanSmiSSiOn
Page 52
V-BELT PuLLEysusable in DIn/ISO V-belt pulleys
V-grOOVEd PuLLEysall standard pulleys,special pulleys on request
PKR 0 PKR 1 PKR 2
HEigHT Of TOP SURfaCE
TyPE OfTOP
surfacE
sTandard(MM)
MAX.(mm)
cLassIfI-caTIOn
(MM)
PKR 0PKR 1
PKR 2
233
33–
–10–
OPTimaT OE/DK/fKOPEn-EnDED V-BELTS punched, DIn 2216
sPEcIaL VErsIOn• available with black chloroprene cover bands• electrical conductance (on request)
OPTimaT PKROPEn-EnDED V-BELTSDIn 2216, with top surfaceSections: z / 10, A / 13, B / 17, C / 22, 25*, D / 32*
* Special versions are only available for lengths greater than 50 m ± 10 % For section 25 and D / 32 top surface height of 5 mm is only possible
OPTimaT OE V-belts, DIn 2216, punched
OPTimaT DKdouble V-belts, punched
OPTimaT fKconveyor belts, punched
BELTS fOR SPECiaL DRiVE SOLUTiOnS
TECHniCaL ELaSTOmER fOiLS
Page 54optibelt ELaSTOmiT TECHniCaL ELaSTOmER SHEETingoptibelt ELaSTOmiT X-Ray PROTECTiOn
Page 55fITnEss and THEraPy Bands
“Because the quality is the best.” David, 50, Buyer
© ArnTz OPTIBELT GrOuP, GErmAny
Page 54
optibelt ELaSTOmiT TECHniCaL ELaSTOmER SHEETingHigh-quality elastomer foils from OPTIBELT are versatile problem solvers. The products can be used in various industrial sectors, e.g. automotive, mechanical engineering, medical technology.
optibelt ELaSTOmiTX-Ray PROTECTiOnoptibelt X-rAy PrOTECTIOn offers high protection levels with low weight as well as excellent fl exibility thanks to the rubber parts used. Our product range includes lead-containing, low-lead and lead-free versions.
TECHniCaL ELaSTOmER fOiLS
Page 55
© ArnTz OPTIBELT GrOuP, GErmAny
fiTnESS anD THERaPy BanDSOPtibelt is known as a reliable producer of high-quality fi tness and therapy bands. Developments such as latex free fi tness belts are a sign of constant innovation.
OPTiBELT SUCCESS STORy
DEUSER-BanD OPtibelt is known as a reliable producer of high-quality fi tness and therapy bands: the best example is the Original deuser-Band. It gets its name from the physical therapist Erich Deuser. Deuser worked with the German national football team from 1951 to 1982 and fi rst started train the players with a bicycle tube until he developed a rubber band with variable tensions in 1967, which is specially designed for strength training: the Deuser-Band.
ELaSTOmER SOLUTiOnS
Page 56
mEDiaPLUS The OPTiBELT e-shop
OPTIBELT mediaplus offers you a simple and easy opportunity for making status queries and orders via the Internet. register at our home page www.optibelt.com and activate your access to the e-shop mediaplus.
• Flexibility Order online around the clock• Time savings Easy orientation thanks to simplifi ed product search• Planning reliability Product availability and order status online
OPTiBELT EDi The structured data exchange
OPtibelt offers its business partners with EDI connection another possibility for transmitting data. EDI allows for a structured data exchange between business partners without any manual interactions, generating the error-free exchange of data.
• Effi ciency improvement Automated control of business processes• Cost avoidance no errors from manual data entry• Flexibility Simple platform-independent installation
OPTiBELT COnnECT Direct connection to our customers’ procurement
With OPtibelt Connect we offer our business partners the opportunity for a direct order via the customer’s pro-curement system as well as queries about the status of all orders.
• cost savings Single installation, quick order placement• Planning reliability Automated order and assignment confi rmation• Time savings no redundant recording of order data
WELL nETWORKEDEven in digital transaction we offer our customers versatile opportunities to carry out transactions optimally and effi ciently.
E-SERViCES
© ArnTz OPTIBELT GrOuP, GErmAny
PULLEyS anD BUSHES
Page 58 optibelt KRS V-grOOVEd PuLLEysoptibelt ZRS sTandard TIMIng BELT PuLLEys
Page 59 optibelt ZRS DC sTandard TIMIng BELT PuLLEys fOr optibelt dELTa cHaIn carbon optibelt RBS rIBBEd BELT PuLLEys
Page 60 optibelt SPECiaL PULLEyS optibelt mETaL aCCESSORiES
Page 61 optibelt TB TaPEr BusHEs optibelt CE cLaMPIng BusHIngs
Page 58
fOR TaPER BUSHES
sEcTIOn OrIEnTaTIOn crOss sEcTIOn
rIBs
SPZ / 10SPA / 13SPb / 17SPC / 22
50 – 630 mm 63 – 630 mm 100 – 1000 mm
200 – 1250 mm
1 – 8 1 – 5 1 – 10 2 – 10
fOR CyLinDRiCaL BORES
sEcTIOn OrIEnTaTIOn crOss sEcTIOn
rIBs
SPZ / 10SPA / 13SPb / 17SPC / 22
45 – 355 mm 50 – 560 mm 56 – 630 mm 180 – 630 mm
1 – 31 – 51 – 61 – 6
fOR TaPER BUSHES
sEcTIOn BELT wIdTH TEETH
l
H
XH
12.7 mm19.1 mm25.4 mm25.4 mm38.1 mm50.8 mm76.2 mm50.8 mm76.2 mm
101.6 mm
18 – 120 18 – 120 18 – 120 16 – 120 18 – 120 18 – 120 20 – 120 18 – 48 18 – 48 20 – 48
fOR CyLinDRiCaL BORES
sEcTIOn BELT wIdTH TEETH
Xl
l
H
XH
6.4 mm7.9 mm9.5 mm
12.7 mm19.1 mm25.4 mm19.1 mm25.4 mm38.1 mm50.8 mm76.2 mm50.8 mm76.2 mm
101.6 mm
10 – 72 10 – 72 10 – 72 10 – 84 10 – 84 10 – 84 14 – 48 14 – 120 14 – 120 14 – 120 16 – 120 18 – 96 18 – 96 18 – 96
optibelt KRSV-gROOVED PULLEySin accordance with DIn 2211
taper bushes
optibelt ZRSSTanDaRD Timing BELT PULLEyS
taper bushes
V-gROOVED PULLEyS, Timing BELT PULLEyS, RiBBED BELT PULLEyS anD SPECiaL PULLEyS
Page 59
© ArnTz OPTIBELT GrOuP, GErmAny
fOR CyLinDRiCaL BORES
dEsIgnaTIOn dIMEnsIOns rIBs
4 PJ 8 PJ 12 PJ
22.5 – 42.5 mm22.5 – 42.5 mm22.5 – 42.5 mm
48
12
fOR TaPER BUSHES
dEsIgnaTIOn dIMEnsIOns rIBs
tb 4 PJtb 8 PJtb 12 PJtb 16 PJtb 6 Pltb 8 Pltb 10 Pltb 12 Pltb 16 Pl
47.5 – 222.5 mm 47.5 – 222.5 mm 62.5 – 222.5 mm 62.5 – 222.5 mm 78 – 388 mm 78 – 388 mm 88 – 388 mm 88 – 388 mm 103 – 388 mm
48
121668
101216
fOR TaPER BUSHES
sEcTIOn BELT wIdTH TEETH
8mDC 12 mm21 mm36 mm62 mm
22 – 192 22 – 192 22 – 192 22 – 192
optibelt RBSRiBBED BELT PULLEyS
taper bushes
optibelt ZRS DCSTanDaRD Timing BELT PULLEyS
taper bushes
Page 60
(1) (2) (3) (4)
DimEnSiOnS
Sections and dimensions available on request
optibelt SPECiaL PULLEyS
optibelt mETaL aCCESSORiES(1) optibelt CPclamping plates
(2) optibelt fSfl at belt pulleys for taper bushes
(3) optibelt mSmotor slide rails
(4) optibelt mSmotor slides
V-gROOVED PULLEyS, Timing BELT PULLEyS, RiBBED BELT PULLEyS anD SPECiaL PULLEyS
Page 61
© ArnTz OPTIBELT GrOuP, GErmAny
DimEnSiOnS
TaPEr BusHEs BOrE dIaMETErs
1008110812101215131016101615201225173020303035253535404045455050
10 – 25 mm 10 – 28 mm 11 – 32 mm 11 – 32 mm 14 – 35 mm 14 – 42 mm 14 – 42 mm 14 – 50 mm 16 – 60 mm 25 – 75 mm 35 – 75 mm 35 – 90 mm 35 – 90 mm 40 – 100 mm 55 – 110 mm 70 – 125 mm
DimEnSiOnS
dEsIgnaTIOn BOrE dIaMETErs
Ce01Ce02Ce03Ce04Ce05Ce06Ce07Ce08Ce09Ce10Ce11Ce12Ce13Ce14
18 – 400 mm 6 – 100 mm 6 – 150 mm 20 – 180 mm 20 – 200 mm 20 – 180 mm 20 – 200 mm 25 – 200 mm 45 – 100 mm 14 – 60 mm 14 – 60 mm 16 – 60 mm 15 – 70 mm 24 – 260 mm
optibelt TBTaPER BUSHES
optibelt CECLamPing BUSHingS
Page 62
Visit us at optibelt.com
michael, 33, mechatronics Technician
“ There for me around the clock.”
the OPtibelt app keeps you well informed any time, anywhere. Whether you need information about the company, newsletter, order query, length and frequency calculations, the OPTIBELT app keeps you up to date. And with a simple click you are in the OPTIBELT e-shop mediaplus and will be able to access prices and stock as well as order directly online.
OPTiBELT SmaRTPHOnE aPP
OPTiBELT in THE WEB Fresh, dynamic and easy to use, optibelt.com will provide you with all you need to know about the company, the products and the services. Our industry fi nder will also direct you immediately to the information you need for your sector.
WEBSiTE anD aPP
© ArnTz OPTIBELT GrOuP, GErmAny
SERViCE TOOLS
Page 64optibelt CaD drIVE caLcuLaTIOn PrOgraM optibelt CaP MuLTI-PuLLEy rangE TIMIng BELTs
Page 65optibelt CUT ii sLEEVE cuTTIng MacHInEoptibelt mEaSURing gaUgE fOr V-BELTs, TIMIng BELTs and rIBBEd BELTsoptibelt TT OPTiCaL frEquEncy MEasurIng dEVIcE
Page 66optibelt SERViCE KiToptibelt TT mini S frEquEncy MEasurIng gaugE wITH fLExIBLE nEck optibelt LaSER POinTER ii aLIgnIng BELT drIVEs
Page 67optibelt TEnSiOn nOTEBOX sTIckEr optibelt SERViCE-BOX suPPOrTs Many aPPLIcaTIOns
Page 64
optibelt CaDDRiVE CaLCULaTiOn PROgRamDownload CAD fi les for the standard product range of pulleys and bushes in 2D and 3D models
optibelt CaPmULTi-PULLEy RangE Timing BELTSfor the calculation and design of multi-pulley timing belt drives
SERViCE TOOLS
Page 65
© ArnTz OPTIBELT GrOuP, GErmAny
optibelt CUT iiSLEEVE CUTTing maCHinEfor all standard timing belts and ribbed belts
optibelt TT OPTiCaLfREQUEnCy mEaSURing DEViCE rangE Of MEasurEMEnT
• 5 – 500 Hz
optibelt mEaSURing gaUgEfor V-belts, timing belts and ribbed belts rangE Of MEasurEMEnT
• 500 – 2500 mm interior length (Li)
Page 66
optibelt SERViCE KiTSERViCE CaSEcontains a number of technical devices that can be used to carry out a series of optimisations on existing drives
optibelt TT mini SWiTH fLEXiBLE nECKfor easy measurements on tough to access positions
optibelt LaSER POinTER iiLaSER aLigning BELT DRiVESIt also helps to determine the three most common causes of drive failures:
• the axial misalignment of the pulleys• the horizontal angle deviation• the vertical angle deviation
SERViCE TOOLS
Page 67
© ArnTz OPTIBELT GrOuP, GErmAny
optibelt TEnSiOn nOTEBOXTEnSiOn nOTESThe proven OPtibelt Tension notes sticker documents the default values for the proper tension methods.
optibelt SERViCE-BOXTHE On-SiTE SUPPORT fOR nUmEROUS aREaSThe tensioning of the belt and monitoring of the tension with OPTIKrIK makes it easier for installers to carry out maintenance work on site and increase the reliability of the drive.
Page 71
Reproduction prohibited, violations will be prosecuted as a copyright offence. Errors and omissions excepted. OPTIBELT products are exclusively for wholesalers, OPTIBELT only recommends the use of its products as instructed in the OPTIBELT documentation. The use of OPTIBELT drive belts in aeroplanes or aviation-like systems is prohibited due to safety reasons. OPTIBELT denies all liability for its products if used in applications they were not designed or manufactured for. For all other matters, OPTIBELT refers you to its general terms and conditions.
The currently valid conditions can be found at www.optibelt.com
© ARNTZ OPTIBELT GROUP, GERMANY 41-1437/0215Hux
SPECIAL SOLUTIONS
S=C Plus, unmeasured set always, consistent to nominal mass
97 % effi ciency
LCV-belts with covering weave
LDLight Duty V-belts in accordance with US Standard RMA / MPTA
With coatings, individual customer solutions
M=S Matched Sets,unmeasured use in sets
optibelt OMEGA timing belts run in standard HTD and RPP pulleys
Includes ribbed V-belts, ribbed belts and toothed pulleys
Large selection for motor vehicles
Large selection for trucks and buses
FDA conform for food production
ELElectrically conductive V-belts
MiningOPTIBELT V-belts, used in underground mining
HVAC S=C PlusClassic V-belts for heat, ventilation and air-conditioning drives
NOTESMaintenance-free
top related