nttrading articon katalog1

catalogue

www.nt-trading.com

nt-trading GmbH & Co. KG meets the requirements of

ISO 13485:2007 and the EU Directive 93/42/EEC

Health Canada Recognized Registrar CMDCAS.

MORE THAN ABUTMENT

Optimized safety and quality

Constant load according to DIN EN ISO 14801

To analyze the behavior of the material and the design of the implants on so many of these force effects and to determine the load

limits, they will be reproduced in simulations. The international standard ISO 14801 describes the test setup and the implemen

tation of such a test of fatigue limit endosseous dental implants.

We have had constant load tests for endosseous dental implants carried out for nt-trading abutments by the National Institute of

Research and Development and Measurement Technique in accordance with standard DIN EN ISO 14801. The load corresponded

to 30° angle to the implant axis. In addition, we have, in conformity with DIN EN ISO 14801 had a finite element analysis test

carried out.

IMPLANT SYSTEMS

E-Serie

is compatible to Nobel Biocare Replace Select® ........................... 4

F-Serie

is compatible to Nobel Biocare™ Nobel Active ™ ............................ 7

H-Serie

is compatible to Biomet 3i Certain® ....................................... 9

I-Serie

is compatible to Biomet 3i Osseotite® .................................. 11

K-Serie

is compatible to Nobel Biocare Brånemark® .............................. 12

L-Serie

is compatible to Straumann Bone Level® ................................ 13

N-Serie

is compatible to Straumann SynOct ® ................................... 15

R-Serie

is compatible to Zimmer Tapered Screw-Vent ...........................® 18

S-Serie

............................... 20

T-Serie

is compatible to Dentsply-Friadent Frialit/Xive® .......................... 22

Prosthetic tools ............................................. . . . . . . . . 25

Dentokeep .............................................................

Scan equipment .....................................................

............................

Sinter components ................................................... 2 9

Tightening torques, Conditions of warrenty ....................... . . 31

CONTENTS

is compatible to Astra Tech OsseoSpeed

28NT-milling tools and grinding tools

Notice:Products indicated with ® are registered brand names of the respective manufactures.

E-Serie | is compatible toNobel Biocare Replace Select ®

Platform 3,5 mm NP

Platform 4,3 mm RP

Platform 5,0 mm WP

Platform 6,0 mm

Titanium Basefor individual milled

Zirconium Abutment incl. screw

Abutment ScrewTitan Grade 5

Recommended tightening

torques 35 Ncm

Scan Bodyfor Titanium Base

Scan Body 3D Guidefor Titanium Base +

2-CONnect

Lab AnalogStainless Steel

E 800 E 810 E 820 E 830

E 00 W E 10 W E 20 W E 30 W

E 9.3D3.500 E 9.3D4.300 E 9.3D5.000 E 9.3D6.000

E 50 E 51 E 52 E 53

E 60 E 61 E 61 E 61

Platform 4,3 mm RP

Platform 5,0 mm WP

E 810 S E 820 S

E 810 M E 820 M

E 810 F E 820 F

N 60 N 60

E 9.3D4.300 E 9.3D5.000

E 51 E 52

2-CONnect-Base Setincl. 2-CONnect Cap and

Cap-Screw

Titan Grade 5

Cap-ScrewTitan Grade 5

torques 30 Ncm

2-CONnect

2-CONnect-BaseTitan Grade 5

torques 35 Ncm

2-CONnect CapTitan Grade 5

Notice: Products indicated with R are registered brand names of the respective manufactures.

E-Serie | is compatible to Nobel Biocare Replace Select®

Notice: Products indicated with ® are registered brand names of the respective manufactures.

Straight Abutment incl. Screw GH 1,0 mm

incl. Screw

Straight Abutment

Platform

GH 2,5 mm

3,5 mm NPPlatform

4,3 mm RPPlatform

5,0 mm WP

E 100-1 E 110-1 E 120-1

E 100 E 110 E 120

™ F-Serie | is compatible to Nobel Biocare Nobel Active

Zirconium Abutment

incl. screw

Titan Grade 5

torques 35 Ncm

2-CONnect

F 800 F 810

F 00 W F 10 W

F 9.3D3.500 F 9.3D4.350

F 50 F 51

F 60 F 61

Platform3,5 mm NP

Platform4,3 mm / 5,0 mm RP

Notice: Products indicated with ® are registered brand names of the respective manufactures. 7

™ F-Serie | is compatible to Nobel Biocare Nobel Active™

F 800 S F 810 S

F 800 M F 810 M

F 800 F F 810 F

N 60 N 60

F 9.3D3.500 F 9.3D4.350

F 50 F 51

Platform3,5 mm NP

Platform4,3 mm / 5,0 mm RP

Cap-Screw

Titan Grade 5

torques 30 Ncm

2-CONnect

torques 35 Ncm

Notice: Products indicated with ® are registered brand names of the respective manufactures.8

H-Serie | is compatible to Biomet 3i Certain ®

Platform3,4 mm

Platform4,1 mm

Platform5,0 mm

Zirconium Abutment

incl. screw

Titan Grade 5

torques 20 Ncm

2-CONnect

H 800 H 810 H 820

H 00 W H 10 W H 10 W

H 9.3D3.400 H 9.3D4.150 H 9.3D4.150

H 50 H 51 H 52

H 60 H 60 H 60

H 800 S H 810 S

H 800 M H 810 M

H 800 F H 810 F

KS 60 KS 60

H 9.3D3.400 H 9.3D4.150

H 50 H 51

Platform3,4 mm

Platform4,1 mm

Cap-Screw

Titan Grade 5

2-CONnect

torques 20 Ncm

H-Serie | is compatible to Biomet 3i Certain®

torques 15 Ncm

I-Serie | is compatible to Biomet 3i Osseotite ®

Zirconium Abutment

incl. screw

Titan Grade 5

torques 35 Ncm

2-CONnect

I 800 I 810 I 820

I 00 W I 10 W I 10 W

I 9.3D3.400 I 9.3D4.150 I 9.3D4.150

I 50 I 51 I 52

I 61 I 61 I 61

Platform3,4 mm

Platform4,1 mm

Platform5,0 mm

Zirconium Abutment

incl. screw

Titan Grade 5

torques 35 Ncm

K 800 K 810 K 820

K 00 W K 10 W K 20 W

K 9.3D3.500 K 9.3D4.100 K 9.3D5.100

K 50 K 51 K 52

K 60 K 61 K62

Platform3,5 mm

Platform4,1 mm

Platform5,1 mm

K-Serie | is compatible to Nobel Biocare Branemark®

2-CONnect

Straight Abutmentincl. Screw

GH 2,5 mm

L-Serie | is compatible to Straumann Bone Level®

Zirconium Abutment

incl. screw

Titan Grade 5

torques 35 Ncm

2-CONnect

L 800 L 810

L 00 W L 10 W

L 9.3D3.300 L 9.3D4.148

L 50 L 51

L 60 L 60

Platform3,3 mm NC

Platform4,1 mm / 4,8 mm RC

L-Serie | is compatible to Straumann Bone Level®

L 800 S L 810 S

L 800 M L 810 M

L 800 F L 810 F

N 60 N 60

L 9.3D3.300 L 9.3D4.148

L 50 L 51

Platform3,3 mm NC

Platform4,1 mm / 4,8 mm RC

Cap-Screw

Titan Grade 5

torques 30 Ncm

2-CONnect

torques 35 Ncm

Zirconium Abutment

incl. screw

Titan Grade 5

torques 35 Ncm

2-CONnect

3,5 mm NNPlatform

4,8 mm RNPlatform

6,5 mm WN

N 800 N 810 N 820

N 00 W N 10 W N 20 W

N 9.3D3.500 N 9.3D4.800 N 9.3D6.500

N 50 N 51 N 52

N 60 N 62 N 62

N-Serie | is compatible to Straumann SynOcta®

Platform 4,8 mm RN

Platform 6,5 mm WN

N 810 S N 820 S

N 810 M N 820 M

N 810 F N 820 F

N 60 N 60

N 9.3D4.800 N 9.3D6.500

N 51 N 52

Cap-Screw

Titan Grade 5

torques 30 Ncm

2-CONnect

torques 35 Ncm

N-Serie | is compatible to Straumann SynOcta®

Recom. tight. torques 35 Ncm

Straight Abutment incl. Screw

Angled Abutment

16°angled over surface

incl. Screw

N 110 N 110 L N 120

N 210-1 N 210-1

N 210-2 N 210-2

N 61 N 61 N 61

N 110-40 N 110-55 N 110-70

N 120-55

otal height

4,0 mmPlatform 4,8 mm RN

Platform 6,5 mm WN

Platform 4,8 mm RN

Total height 5,5 mm

Platform 6,5 mm WN

Total height 7,0 mm

RN-Massiv Abutmentonly for Dentist

WN-Massiv Abutmentonly for Dentist

Angled Abutment

16°angled over edge

incl. Screw

Zirconium Abutment

incl. screw

Titan Grade 5

Abutment ScrewHex 0,50“ (1,26 mm)

torques 30 Ncm

2-CONnect

R 800 R 810 R 820

R 00 W R 10 W R 20 W

R 9.3D3.500 R 9.3D4.500 R 9.3D5.700

R 50 R 51 R 52

R 60 R 60 R 60

Platform 3,5 mm

Platform 4,5 mm

Platform 5,7 mm

R-Serie | is compatible to Zimmer Tapered Screw-Vent®

Platform 3,5 mm

Platform 4,5 mm

R 800 S R 810 S

R 800 M R 810 M

R 800 F R 810 F

N 60 N 60

R 9.3D3.500 R 9.3D4.500

R 50 R 51

Cap-Screw

Titan Grade 5

torques 25 Ncm

2-CONnect

torques 30 Ncm

S-Serie | is compatible to Astra Tech OsseoSpeed®

Zirconium Abutment

incl. screw

Titan Grade 5

Zirconium Abutment

incl. screw

Titan Grade 5

2-CONnect

3,5 mm / 4,0 mmPlatform

4,5 mm / 5,0 mm

S 800 S 820

S 00 W S 20 W

S 9.3D3.540 S 9.3D4.550

S 50 S 52

S 60 S 61

GH 1,5 mm

torques 25 Ncm

Platform 3,5 mm / 4,0 mm

Platform 4,5 mm / 5,0 mm

S 800 S S 820 S

S 800 M S 820 M

S 800 F S 820 F

N 60 N 60

S 9.3D3.540 S 9.3D4.550

S 50 S 52

Cap-Screw

Titan Grade 5

torques 20 Ncm

2-CONnect

torques 25 Ncm

Platform3,4 mm

Platform3,8 mm

Platform4,5 mm

Platform5,5 mm

Zirconium Abutment

incl. screw

Titan Grade 5

torques 25 Ncm

2-CONnect

T 800 T 805 T 810 T 820

T 00 W T 05 W T 10 W T 10 W

T 9.3D3.400 T 9.3D3.800 T 9.3D4.555 T 9.3D4.555

T 50 T 55 T 51 T 52

T 60 T 60 T 60 T 60

T-Serie | is compatible to Dentsply-Friadent Frialit/Xive®

Platform3,4 mm

Platform3,8 mm

Platform4,5 mm

T 800 S T 805 S T 810 S

T 800 M T 805 M T 810 M

T 800 F T 805 F T 810 F

KS 60 N 60 N 60

T 9.3D3.400 T 9.3D3.800 T 9.3D4.555

T 50 T 55 T 51

Cap-Screw

Titan Grade 5

torques 15 Ncm

2-CONnect

torques 25 Ncm

T-Serie | is compatible to Dentsply-Friadent Frialit/Xive ®

Abutment ScrewHex 0,50“ (1,26 mm)

Platform

torques 25 Ncm

3,8 mmPlatform4,5 mm

T 205-2-1

T 205-1-1

T 205-1

T 105-1 T 110-1

T 105 T 110

T 60 T 60

Angled Abutment

16°angled over edge

GH 1,0 mm

Angled Abutment

GH 1,0 mm

Angled Abutment

GH 2,5 mm

GH 1,0 mm

GH 2,5 mm

Prosthetic Tools

Laboratory

Screwdriverfor changeable inserts

(without ISO-Shaft)

ISO-Shaft Connection

W 11.000.000

W 11.100.000

W 11.IRS.G10

W 11.TH0.G20

W 11.Y00.G30

W 11.LN0.G40

W 11.EFK.G50

W 11.005.G60

Torque Ratchetcontinuously adjustable

to max. 40 Ncm

ISO-Shaft Connection

Insertfor Laboratory Screwdriver

and Torque Ratchet

ISO-Shaft for S-, I- and R-Series

Hex 0,50“ (1,26 mm)

and Torque Ratchet

ISO-Shaft for T- and H-Series

Hex 1,20 mm

and Torque Ratchet

ISO-Shaft for AnkylosR

Hex 1,00 mm

and Torque Ratchet

ISO-Shaft for L- and N-Series

Torx T6

and Torque Ratchet

ISO-Shaft for E-, F- and

K-Serie UG

and Torque Ratchet ISO-Shaft

for 2-CONnect-Base-Primary

Dentokeep PEEK Disc

DentokeepPEEK Disc

Size 14 mm

PEEK Disc

Dentokeep

Size 18 mm

12.000.P14

12.000.P18

Dentokeepnt-trading Dentokeep Disc PEEK are blanks for technical milling manufacture of permanent dentures and prosthetic brace in

the CAM process. The derived prosthetic designs are available on the remaining teeth, - can be attached to stumps and / or

implant abutment and provide a basic functional and aesthetic care.

1. PEEK Disc 98.5 mm, pearl white, 14 mm and 18 mm thick

2. For CAD / CAM Technology for CAD/CAM Technology

3. Clip in prosthetics CAD/CAM

4. Class II product for permanent prosthetic restorations

dental cad cam systems

nt-trading GmbH & Co. KG | Esso-Str. 16 | 76187 Karlsruhe | Germany

Phone: +49 (0) 721 / 91 54 71 - 60 | info@nt-trading.com | www.nt-trading.comPC

Донской 5-й проезд, д.15, стр. 5 +7 (495) 221-50-52articon-dental.com

e-mail: info@articon-dental.com

nttrading articon katalog1

implant systems eserie

wp platform

rp platform

titanium base peek scan

nobel biocare nobel

capscrew titan grade

np platform

nobel biocare brnemark

Health & Medicine

pašman katalog1 finalni minhen - pašman resort ·...

katalog1 - sunsplus...title katalog1.cdr created date...

katalog1 - adasadas.com.tr/adas-2016.pdfrebeka rs/eea i...

steiff katalog1

gmd-kapak katalog1 2016 - gmd group › ... › 2017 › 10...

lacuna katalog1 web¾ni-program.pdflacuna coverguard 1

Книги издательства «ymca-press» в...

Öz-bir...

katalog1 -...

katalog1 - ffhtitle katalog1.pdf author martin wahl created...

katalog1 - pts-trading5 1076 battery f. casio np90, 1400mah,...

product overviewnikken.com.tr/kataloglar/katalog1.pdf ·...

katalog1title microsoft word - katalog1 author ueli created...

products for bedside procedures -...