nisshinbo • behrens • euromach thick turretclearance chart sec-1 keying - standard locations 2...
Post on 15-May-2020
2 Views
Preview:
TRANSCRIPT
Amada • Strippit/LVD • Finnpower Nisshinbo • Behrens • EuroMach
STRIPPIT® is a Registered Trade Mark of the Idex Corporation Inc.
THICK TURRET (AT) TOOLING
COLE ENGINEERED
C.E. TOOLING 3Section
Tooling Booklet
See Section 1 For Technical Information
QUICK SET™ patented
Tool Length Adjustment
Section-3 Page 2 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
Sta. C-E 2”-4 1/2 WT Style Punch. P15,17,19 HD™ Series 80, 90® 90abs, 90wls & LS™ Holder Styles
Original Standard Full Body Style Page 16,18,20,22 m Metric M12 or i Inch ½” threads
Punches are Equiped with
Puller M8 threads Strippers recessed 2mm for greater punch grind life
Tool Styles INDEX: Metric, Inch, LS™, Ultra®, S90® S90abs® S90wls™, Vortec™
Metric Original
Page 6,7,11,13
Sta. B Standard & ABS(w/Lube Channels Fits all Tool Styles
CE’s Sta. B Stripper can be use for all RSP Guides: Quick-Set™,Vipros, Impact, HP™, Ultra™, S80, S90, Drop-In Page 10,11,13-15
Vortec™ or Z-Style Compatible Components Page 1716,18,20,22
Ultra is a regestered trade mark of Mate Precision. Series 90 & WLS are trade marks of WilsonTool. Vortec is a trade mark of Amada Engineering Service.
Vortec™ style Quick-Set™
PAGE 6,7,12,13
Ultra Tec WT HPTM Amada Quick-Set Page 9 Page Page 7
STRIPPER STYLES AM Style for use in C.E., Amada,
& Strippit® mfg. Guides
WT Style for use with WT, CE, or Amada Mfg. Guides
for use in Wilson Mfg. Guide
U Style for use with Mate Mfg. \ Ultra Guies
Sta. A Strippers
*
*
*
*
*
*
Shearing Dies & Guide Assemblies
UltraTec™
Page 10
Page22
Qui
Quick- Set™
Sizes 1.25”=31.75mm - 4.5”=114.3mm
Multi-Tools Page 23
& Section 6 booklet
WT HP™ & S90™ Std, abs, wls
Inch WT-S80 Page 8,9,14,15
Std HDStd HD
Down Load our complete Thick turret booklet form www.cetooling.com
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 3 n
COLE ENGINEERED
Page
METRIC: Amada Style Standard & Air Blow, Vipros Station A, B, C, D, E Although C.E. Tooling manufactures tools to be fully interchangeable with Amada tools, there is no affiliation between our companies.
6,7,10, 14,16,18
INCH: Wilson Style Standard-original Inch-S80 ½ & 1¼” Station A & B Although C.E. Tooling manufactures tools to be fully interchangeable with Wilson’s tool, there is no affiliation between our companies. 8,12
HD:Wilson Style High Performance & Series 90® HD, & Series 90 are registered trade marks of Wilson Tool Although C.E. Tooling manufactures tools to be fully interchangeable with Wilson’s tool, there is no affiliation between our companies. 15,17,19
Ultra® Mate Style Ultra Tek , Metric, or Inch, Style Tools Ultra is a regestered trade mark of Mate Precision. Although C.E.Tooling manufactures tools to be fully interchangeable with Mate Precision Ultra™ products, there is no affiliation between our companies
9, 14, 16,18
Accessories: Sec.-1 Coining 27 Multi-Tools Nisshinbo —> Finnpower style see Booklet 6 Adapters: 22 Drop-In Holders & Tools 13
Alignment Tools 5 Ejectors 5
Ball Riding / Lifter Dies 25 Embossing - Extrusions 27 Shears
Blade Inserts & Holders 20 Slug Ejectors 5
Card Guide 25 Form Tools 24-28 Special Shapes 29
Center Punch 27 Half Shear 27 Standard Shapes 2
Chamfer Corners 2 Stiffening Rib Tools 24
Charactor Marking Insert Style 28 Inch Style Sta. A & B 8, 14 Stripper-Guide Adhesive Disks 6-20
Clearance Chart Sec-1 Keying - Standard Locations 2 Tapping: Turret Tapping 22
Coatings: Technical Info. Sec-1 Lances & Louvers 29 Tooling Packages
23
5
21
Index of Tooling- Holders Styles
C.E. PRODUCT FEATURES HIGHLIGHTS
DIE Constant Clearance in Corners Superior part quality: Prevents large corner burrs, makes dies stronger & increases die life. Strongest Dies: To allow the slug to fall through die, often die back must be relieved. CE burns a 3° taper to allow slug to pass though with little drag. On corners of shapes like rectangles, rather than leave sharp were they can attract stress and create a crack line, CE takes the care to burn a tapered radius relief. This is an important feature skipped by most of our competitors.
DIE OPENNING
PUNCH
FACE
PUNCH Easier stripping and reduced gauling as we
extend 1/4°(1/8° per side) Back Taper. Cutting Edge and Corners have .003 honed radius.
EXCLUSIVELY From C.E. TOOLING The QUICK-SET™ This patented tool length adjustment unit allows for fast, simple tool set up for standard and special application tools. Form tool holders adjust in as close as .0025” with only a lift and turn of the outer knurled collar. Standard Tool Holders adjust in .006/15mm increments with a push of a button located in the side of the lifter flange. Tool length can’t change during use. Reduced set up and maintenance costs.
Stripper Plates Relived .04 - .12 depending on station. This relief extends greater punch tip grind life.
SLUG TRAP™ DIES ELIMINATE SLUG PULLING WITH A SECOND TAPER ON THE DIE WHICH TRAPS THE SLUG. Note: Taper shown in diagram is exaggerated to express feature.
Character Markng Accepts Replaceable Inserts. Ref. page 26. Request our Technical Bulletin
Section-3 Page 4 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
ADDITIONAL COSTS FOR NON-STANDARD OPTIONS Add 25% to set
price for Clearance of .003 (.08mm) &
Less. PUNCHES Corners 1-3 X # 4(all)
With Length under 1.625 and any size Radius or Chamfer # X $10.00 $10.00 With Length over 1.625 & .032 maximum Radius or Chamfer # X $10.00 $30.00 With Length over 1.625 and Radius or Chamfer over .032(,8mm) # X $15.00 $40.00 Add On To All DIES any size Radius or Chamfer # X $10.00 $10.00 No Extra Charge for STRIPPERS or When Ordered As A Set
RADIUS CHAMFER RADIUS OR 45°CHAMFERS + $ per corner
Widths or Dia. Under .093(2,36mm) Add 30% to set price. Widths or Dia. Under .062(1,57mm) Add 50% to set price. Widths or Dia. Under .046(1,2mm) Add 100% to set price. Included in add on cost; Dies are produced with .090 land then a 1.5° relief is given to prevent multiple slugs from stacking causing excessive pressure on punch. Further, punches can be produced with Stubby Punch Design at no additional charge. A Stubby Punch has it’s tip (diameter or width) first ground to a size of .187 then a tip is ground to requested size for a length of .225+ thickness to be punched. (If fitted strippers are used, + .125 to tip grind length and use strippers .187 or > in diameter or width.)
Add 50% to die price for Solid Dies.
DIA. ORWIDTH.156
.09.09 land,
then 1.5° relief
Optional STUBBY PUNCH
.187 Dia. or Width
STANDARD KEYING 10 Standard Shapes plus Rounds. (RT Rectangles • SQ=Square • OB=Obround • SD=Single-D • DD=Double-D
LD=Long-D • EQ=Equalateral • OC=Octagon • HX=Hexagon • QD-Quad-D • Add $10 per set to standard price for LD & EQ
LOOKING AT FACE OF LOOKING AT TOP OF
PUNCH DIE Sta.
A & B ½ •1¼
Sta. C 2”
Sta. D 3½”
Sta. E 4½”
Series 80
Sta.C-E 2”-4½”
SPECIAL SHAPES
SHIPPED IN 1-5 days Expediting: 3 days 10%, 2 days 30%, 1 day 50%
10 STANDARD SHAPES 1 - 4 work day delivery.
RECTANGLE • SQUARE • OBROUND • SINGLE-D DOUBLE-D • QUAD-D • HEXAGON • OCTAGON + $10 PER SET FOR: LONG-D & EQUILATERAL
Guaranteed Expediting Services FDS=Firm Delivery Service • Order by 1pm,
Same or Next day guaranteed Guaranteed to ship in 2 days
Tool Styles: AT, AS, ST: 1 day FDS=25% 2 day FDS=10% Tool Styles 36tc,28st,Lila,92/93
1 day FDS=50% 2 day FDS=25%
Shapes on Angles or Extra Key Locations. Die View
Visualize location key positioned as tool would load into turret. Start with length of shape horizontal.(Length points to 0º) Next Rotate shape, not location key. A sketch accompanying your order ensures keying as required! Note: Other Manufactures ordering diagrams may differ from C.E.’s!
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
0
90
180
270
Angle120
20
Ex. AT Sta.Keyed 20
Ex. AT Sta.Keyed 20
Ex. AT Sta.Keyed 20
Ex. AT Sta.Keyed 20
Ex. 28XX/36tKeyed 20
Ex. 28XX/36tKeyed 20
Ex. 28XX/36tKeyed 20
Ex. 28XX/36tKeyed 20Ex.114/112/C
Keyed 20Ex.114/112/CKeyed 20
Ex.114/112/CKeyed 20
Ex.114/112/CKeyed 20
Standard Delivery is 3-5 work days Guaranteed Delivery(Expediting)
FDS=“FIRM DELIVERY SERVICE” Order By 1pm, to ship in __ Work Days
3 Day Guaranteed +10% 2 Day +30%, 1 Day +50%
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 5 n
COLE ENGINEERED
Slug Ejectors Ejector holes are placed in punch tip sizes >.270”/6.86mm This size can be reduced on request.
EJECTOR For Hole Size
Square Used for AT,AS,ST Cat.Code
Round Used for 4W,2W,2B
Cat.Code .078/2mm N/A *AEJ-R2 Bag of 50 $22.50
.109/3mm *AEJ-S3 bag of 24 $13.40 .234/6mm-.25” *AEJ-S6 bag of 24 $13.40 *AEJ-R7 Bag of 50 $20.90
.394/10mm *AEJ-S10 bag of 12 $9.10 Used for AT,AS,ST,4W,2W,2B
.594/15mm *AEJ-S15 bag of 12 $11.25 Used for AT,AS,ST,4W,2W,2B Have Ejectors Installed in New Punches at additional minimal
cost to punch price! Call For Current Pricing!
Punch Sharpening Fixture
WORK HOLDER
PARTS Save! up to
Amada Machine Parts Save! On Clutches, Brakes, Electronic Switches, Fanuc Control Boards, Ball Screws, Rails, Hydraulics, Filters, Belts, etc.. Go to Section 11 booklet.
Sq. & Rt Shown Sq. & Rt Shown
OPTIONAL PUNCH SHEARS
Best all purpose shear for reducing
tonnage requirement Nibbling must be
performed at 75% of punch size to avoid
side loading.
An all purpose shear. Ideal for
nibbling.
An all purpose shear. Ideal for nibbling. Used over Inverted Shear when punching heavy plate.
Best Shear for slotting tools, 3”
or longer in length.
Reduces tonnage requirements while
reducing slug deformation. Requires a very Ridged Press.
A Shear suggested for all diagonal dimensions over 2”/50.8mm with widths >.375/9.53mm
Roof Top *ARTS $8.00
Inverted *AIS $9.10
Concave *ACS
$
Double Inverted
*ADIS $20.00
Whisper (1-Way) *AWS
$8.60
Spiracle *ASPS $8.60
Ideal for rounds or squares less than 1.18
30,m. Lessens tool side loading &
“Easy to sharpen”!
Stripper / Guide Dia. Qty Part# Price 1/2 .87 10 pcs *A06082 8.60
1-1/4 1.75 10 pcs *A06084 8.60
3-1/2 3.67 10 pcs *A06086 66.90 4-1/2 4.67 10 pcs *A06088 Call
Reduces marring of material by the stripper. Just peel off adhesive backing, and attach to stripper face. Use
sharp knife blade to cut out stripper opening.
2” 10 pcs *A06085 Call
STRIP GUARD Adhesive Disks
ALIGNMENT TOOLS
½” Sta. A keyed ATA-ALIGN-PD 358.75 ½” A non-keyed ATA-ALIGN-PD2 176.55
1-¼ Sta. B ATB-ALIGN-PD 502.30 2-½ Sta. C ATC-ALIGN-PD 639.10 3-½” Sta. D ATD-ALIGN-PD 696.75 4- ½” Sta. E ATE-ALIGN-PD 799.90
Not shown, used with keyed unit, to align multi-3 die holder. Place keyed unit in outer position and
non-keyed in inner position.
Dwg:\cnc-jobp\ALN-TOOL.2d
KEYS: Turret-Guides
See Section 11 Booklet
For disassem-bly of Sta. A & B Punch Assemblies
Spanner Wrench *ASPWR
Section-3 Page 6 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED Metric Amada Style Standard & Air Blow Max. Material 7 ga. MS
STANDARD AMADA COMPATIBLE C.E. Too Part # *= r-round s-shape
Amada
Code No.
$ Round Amada Code No. $ Shape
PUNCH ASSEMBLY D-2 ATA-PAm-* 11103K 80.75 12102K 148.70
PUNCH ASSEMBLY M-2 ATA-PAm-hs-* 100.60 164.80
DIE AT-A-D-* 21102K 15.20 22102K 35.65
DIE w/SlugTrap™ ref. p1.12 AT-A-Dst-* 27.80 42.80
SET Punch Ass’y D-2& Die ATA-PADm-* 31103K 102.75 32102K 184.35
SET Punch Ass’y HS & Die ATAPADm-hs-* 115.60 194.75
SET P.Ass’y M2 & Die w/SlugTrap ATAPADm-hst-* 118.80 201.20
PUNCH D-2 Steel AT-A-Pm-* 41103K 25.40 42102K 52.70
PUNCH M2 High Speed Steel ATA-Pm-hs-* 41___ 36.40 42___ 64.20
GUIDE OEM Style “hardened” AT-A-G-m* 51102K 41.10 52102 63.920
HEAVY DUTY Max. 1/4 M.S. C.E. Too Part # Amada $ Round Amada $ Shape
PUNCH ASSEMBLY ATAPAm-hd-* 150.85 213.75
DIE ATAD-* 21102 15.20 22102 35.65
DIE w/SLUGTRAP™ (ref. P1.12) ATADst-* 27.80 42.80
SET Punch Ass’y M-2 & Die ATAPADm-hd-* 162.65 252.55
SET P. Ass’y M-2 & Die w/SlugTrap™ ATAPADm-hst-* 168.00 256.80
PUNCH MD Heavy Duty ATAPm-hd-* 41_02 36.40 42_02 64.20 GUIDE ATAG-m* 51102 41.10 52102 63.90
ADJUSTABLE
PUNCH HEAD
SPRING
SPRINGRETAINER
GUIDE
PUNCH
GROUNDLOCATION KEY
SPRING Max. 9ga.MS
SPRING RETAINER
LOCATION KEY
PUNCH + 1/8º Back taper to assist stripping, and
reduce gauling
DIE
OEM style Hardened Guides!
Side Lock Punch Head
AIR BLOW AMADA C.E. Too Part # Amada $ Round Amada $ Shape
PUNCH ASSEMBLY
Coil ATA-PA-v-* 11802a 160.50 11804a 232.20 Disk Spring ATA-PAv-hd* 185.65 258.95
DIE AT-A-D-* 21102k 15.20 22102k 35.65 DIE w/SLUGTRAP™ref. P1.12 AT-A-D-st* 27.80 42.80 SET (Punch Ass’y & Die) ATA-PADv-* 31802a 174.45 32802a 264.85 PUNCH M-2 High Speed AT-A-Pv-* 41802a 56.20 42802a 77.60 GUIDE AT-A-G-v-* 51802a 82.40 52802a 140.20
COMPONENT PARTS C.E. Too Part # Amada $Round Amada $Shape
PUNCH HEAD Side Lock AT-A-Hm 90140K 9.65 COIL SPRING AT-A-Sm 90130K 8.05 DISC SPRING (Set of 24) AT-A-DS-m 90130k 36.40 SPRING RETAINER AT-A-SRm 90120K 6.20
Spring Retainer with Extended B Dimension to Give More Punch Life For Punches After .08”/2,mm Grind (Red) ATASR2
For Punches After .16”/4,mm Grind (Green) O-RING ATAG-Oring-m 90090 1.65 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs
B
1/2 Station A SIZE RANGE .093-.500”/2,36-12,7mm
Heavy Duty 1/4”M.S.
• Max. material 1/4”/6,mm mild steel up to 1/2” diameter • 1º total back taper on punch tips to reduce gauling build up, and stripping pressure.
L
DISC SPRING (28 req’d) Max. 1/4” M.S.
SPRING RETAINER
DIE
OEM style Hardened Guides!
PUNCH HSS (M2) + 1º Back taper to
assist stripping, and reduce gauling
Side Lock Punch Head
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 7 n
COLE ENGINEERED
• No Shimming • Lift and Turn Spring Pack for .004/,1mm increments of adjustment. • Rapid Hit™ • Achieve faster nibble rates when used on hydraulic, high speed nibbling machines. • Uses Industry Standard Punches • Punch up to 9 ga. 3.8mm thick steel.
Quick-Set™ Spring Canisters Amada Vipros Compatible
DIE
Method #2 HOLDER SYSTEM Install in all turret stations. Stock only punch, stripper & die. Guide uses removable strippers.
Method #1 PUNCH ASSEMBLY Each tool size is inventoried as a complete punch and guide assembly. · Faster change over and a more durable (hardened) guide.
Standard Vortec Style W/lube notches
Spring Pack CAN Ass’y *AATA-CANmd 50000k 104.90 O-Ring (Retainer to guide) ATAG-Oring-m 90090k 1.65 O-Ring (Seal on punch head) ATACAN-Oring 52010k 1.65 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs
COMPONENT PARTS
1/2 Station A SIZE RANGE .093-.500”/2,36-12,7mm
ABS Air Blow Metric Amada Style Punch & Guide
Method #1 Punch Assembly ATA-PAv--* 11853a 235.40 12852a 304.95 DIE ATA-D-* 21102k 15.20 22102k 35.65 DIE w/SLUG TRAP™ ATA-D-st-* 27.80 42.80
Method #2 Holder System *AATA-QHv-rsp* 246.10 299.60 Punch, Die, Stripper M2-abs ATA-PSD-v* 81.60 138.30
Stripper W/Lub notches ATA-Sv-* 51863a 13.40 52863a 24.10 Punch M-2 HSSteel –abs ATA-Pv-* 41802a 56.20 41803a 77.60
Quick-Set™
TM
C.E.TOOLINGTOOLS
PUNCHRAISES CLOCKWISE
CLOCKWISELOWERS PUNCH
COUNTERTWIST
Standard Metric Amada Style Punch & Guide
Method #1 Punch Assembly CE Part # *= r-round s-shape
Amada No. $ ROUND Amada No. $
SHAPE
Punch Assembly D2 ATA-PAm-q-* 11852k 160.50 12152k 224.70 Punch Assembly M2 ATA-Pam-q-hs-* 173.35 237.55 DIE ATA-D-* 21102k 15.20 22102k 35.65 DIE w/SLUG TRAP™ ATA-D-st-* 27.80 42.80 Method #2 Holder System *A-ATA-QHm-rsp-* 50000k Punch D-2, Die, Stripper ATA-PSD-m-* 49.80 105.15 Punch M-2, Die, Stripper ATA-PSDm-hs-* 58.35 118.00 Punch M-2, Die W/SLUGTRAP™, Stripper ATA-PSDm-h-st* 61.00 123.35 Punch D-2 Steel ATA-Pm-* 41102k 25.40 42102k 52.75 Punch M-2 HSSteel ATA-Pm-hs* 36.40 64.20 Stripper Plate for RSP guide ATA-Sq-* 51863k 11.80 52863k 21.40
Section-3 Page 8 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
Standard Pricing is for Punch Tip Sizes .093 (2,3mm) and Above
WT COMPATIBLE DESCRIPTION
CE Part # *= R-round S-shape
WT #
PRICE ROUND
WT #.
PRICE SHAPE
PUNCH ASSEMBLY D-2 ATA-PAi-* 13453 85.30 01811 148.70 PUNCH ASSEMBLY M-2 ATA-PAi-hs-* 0180,8/9 100.60 164.80 DIE ATA-D-* 02192 15.20 0181,7/8 35.65 DIE W/SLUG TRAP™ (ref. P1.12) ATA-Dst-* 27.80 02193 42.80 SET (Punch Ass’y & Die) ATA-PADi-* 102.75 186.20 SET Punch Ass’y M-2 & Die ATAPADi-hs 115.60 194.75 SET•PunchAss’yM-2&Die ST™ ATAPADi-hst-* 01807 118.80 256.80 PUNCH D2 (includes Retain Clip) ATA-Pi-* 1807 23.30 1816 50.60 PUNCH HS High Speed Steel ATAP-i-hs 36.40 64.20 GUIDE Fitted ATA-Gi* 2821 41.10 2904/3 63.90
PUNCHHEAD
SPRING
SPRINGRETAINER
GUIDE
PUNCH
DIE
DIE
PUNCH 1/8º Back taper to assist
stripping, and reduce
gauling!
SPRING RETAINER
SPRING
PUNCH HEAD
HEAVY DUTY C.E. Too Part # WT No. $ Round WT No. $ Shape
PUNCH ASSEMBLY HS ATAPAi-hd* 13514 147.70 13516 216.15 DIE ATAD-* 21102 15.20 22102 35.65 DIE w/SLUG TRAP™ref. P1.12 ATADst-* 27.80 42.80 SET Punch Ass’y HS& Die ATAPADm-hd-* 162.65 252.55 SET P.Ass’y&Die=slug trap™ ATAPADi-hst-* 168.00 256.80 PUNCH (MD Heavy Duty) ATAPi-hd-* 2303 29.00 2304 56.55 GUIDE Fitted ATA-Gi-* 51102 41.10 52102 63.90
Max. material 1/4”/6,mm mild steel
• 1º total back taper on punch tips to reduce gauling build up and stripping pressure.
OEM style Hardened Guides!
INCH: Wilson Style Standard Original Series 80
Retainer Clips 4
pcs
1/2 Station A SIZE RANGE .093-.500”/2.36-12.7mm
COMPONENT PARTS CEPart # WT # Price
1 PUNCH HEAD ATA-Hi 2294 5.35 Set Screw Long Coin Point *A6297 6297
4 SPRING DISC Set (__) AT-A-DS-i 2297 31.30 5 SPRING SUPPORT /Retainer AT-A-SRi 2295 4.85 6 O-Ring for Spring Support ATAG-Oring 2282 1.65 Punch Retainer Clips 4pc *A-ATAPC 1805 .95 Punch Shims pack of 25pc 2167 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs
OEM style Hardened Guides!
PUNCH HSS -M2 +1º Back taper to assist stripping,
and reduce gauling
Heavy Duty
COMPONENT PARTS CEPart # WT # Price
1 PUNCH HEAD ATA-Hi 1802 5.35 Set Screw Long Coin Point *A6297 6297 3 SPRING COIL AT-A-Si 1803 7.75 5 SPRING SUPPORT /Retainer AT-A-SRi 1804 4.85 6 O-Ring for Spring Support ATAG-Oring 2282 1.65 Punch Retainer Clips 4pc *A-ATAPC 1805 .95 Punch Shims pack of 25 pcs 2167 Strip Guard Adhesive Disc *A06082 Pack of 10 pcs
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 9 n
COLE ENGINEERED
CE does not produce Ultra Tec® Canisters or Guides, only the Punch & Stripper used with them.
Although C.E.Tooling manufactures tools to be fully interchangeable with Mate Precision Ultra™ products, there is no affiliation between our companies Pricing is for Punch Tip Sizes .093 (2,36mm) and Above
Station A & B ½u &1¼u Replacement Components, For use in Ultra Tec® and QuickHit®
For Components for Mate’s Ultra® or Original station C-E (2”, 3½” & 4½”) Holders, look to page 8-10 “Original Full Body style tooling, or P17 if WT style punches are being used. Note: We do not offer replacement stripper plates for the Ultra® Sta. C-E holders.
Ultra, QuickHit™, & Mate, are trade marks of Mate Precision.
ULTRA-Tec™ Style Replacement Tooling
½u Station A for UltraTec™ Holder
Size Range .093-.500”/2,3-12,7mm
DESCRIPTION C.E. Tool Code No.
*= R-round S-shape
PRICE ROUND
PRICE SHAPE
½ Punch High Speed Steel ATA-Pu-* 20.90 44.95 ½ Stripper Plate ATA-Su-* 8.05 15.55 ½ Stripper W/Lub Notches ATA-Su-v-* 9.65 18.20 ½ DIE ATA-D-* 15.20 35.65 ½ DIE w/SLUG TRAP™ ATA-D-st-* 27.80 42.80
1¼u Sta. B for UltraTec™ Holder
1¼ Punch High Speed Steel ATB-Pu-* 37.45 64.20 1¼ Stripper Plate RPS ATB-S-* 10.70 25.40 1¼ Stripper W/Lub Notches ATB-S-v-* 15.00 27.85 1¼ DIE ATB-D-* 16.15 43.95 1¼ DIE w/SLUG TRAP™ ATB-D-st-* 29.25 48.70
Size Range 501-1.250”/12,7-31,7mm
1¼ Inch Series 80: for UltraTec™ Holder
DESCRIPTION C.E. Tool Code No. $ ROUND $ SHAPE
1¼ i Punch D-2 ATB-Pi-HS* 43.25 81.00 1¼ i Punch M-2 ATB-Pi-HS* 57.80 96.30 1¼ Stripper Plate ATB-S-* 10.70 25.40 DIE ATB-D-* 16.15 43.95
Die W/SlugTrap™ ATB-D-st-* 29.25 48.70
UltraTec™ Strippers Sta. A & B Lube Notches can be included in stripper openings at no addional cost. Add “v” to code
CE will beat are competitors quote on special shapes by 20%
Metric Original for UltraTec™ Holder
DESCRIPTION C.E. Tool Code No.
*= R-round S-shape $
ROUND $
SHAPE
1/2m Metric Sta. A
½m Punch D2 Steel ATA-Pm-* 25.40 52.75 ½m Punch M2 ATA-Pm-hs* 36.40 64.20 ½m Punch Vortec ATA-Pv-* 56.20 77.60 ½u Stripper Plate ATA-Su-* 8.05 15.55 ½ DIE ATA-D-* 15.20 35.65 ½ DIE w/SlugTrap™ ATA-D-st-* 27.80 42.80
1¼m Metric Sta. B
1¼ m Punch D-2 ATB-Pm-* 44.40 81.00 1¼ m Punch M-2 ATB-Pm-HS* 57.80 96.30 1¼ v Punch Vortec ATB-Pv-* 80.25 117.70 1¼ Stripper Plate ATB-S-* 10.70 25.40 DIE ATB-D-* 16.15 43.95 DIE w/SlugTrap™ ATB-D-st-* 29.25 48.70
Add $3.00 to round punch for dowel pin.
Section-3 Page 10 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
AIR BLOW AMADA COMPATIBLE C.E. Too Part # Amada Code No. $Round Amada
Code No. $Shape
PUNCH ASSEMBLY
Coil Spring ATB-PA-v-* 11804a 203.30 12804a 267.50
Disk Spring ATB-PAv-hd* 245.05 309.25
DIE AT-B-D-* 21101k 16.15 22104k 43.95
DIE w/SLUG TRAP™ref. P1.12 AT-B-D-st* 29.95 48.70
SET (Punch Ass’y-coil & Die) ATB-PADv-* 219.35 313.00
PUNCH M2 High Speed AT-B-Pv-* 41804a 80.25 42802a 117.70
GUIDE –Solid AT-B-G-v-* 51804a 107.00 52802a 128.40
Standard Pricing is for Punch Tip Sizes .093 (2,3mm) and Above
Spanner Wrench *A-SPWR
DISC SPRING (20)
PUNCH HSS (M2) 1º Back taper to assist stripping, and reduce
gauling Triple Temper
STANDARD AMADA COMPATIBLE
C.E. Too Part # *= r-round s-
shape
Amada
Part #. $Round Amad
a Part #.
$Shape
PUNCH ASSEMBLY D2 AT-B-PA-m-* 11104K 153.05 12104K 213.40
PUNCH ASSEMBLY M2 AT-B-PAmhs* 168.00 12104K 226.85 DIE AT-B-D-* 21101K 16.15 22104K 43.95 DIE w/SLUG TRAP™ref. P1.12 AT-B-Dst-* 29.95 48.70 SET Punch Ass’y D2& Die ATB-PADm-* 31104K 169.10 32104K 257.35 SET Punch Ass’y M2 & Die ATBPADm-hs-* 184.05 272.35 SETP. Ass’y M2 & Die=Slug Trap ATBPADm-hst-* 188.35 280.35 PUNCH D2 Steel AT-B-Pm-* 41104K 44.40 42104K 81.00 PUNCH M2 High Speed Steel ATB-Pm-hs-* 41___ 57.80 42___ 96.30 GUIDE Solid OEM Style ATB-Gm-* 51104K 69.60 52104K 84.35
OEM style Hardened Guides!
PUNCH + 1/8º Back taper
to assist stripping, and reduce gauling
Side Lock Punch Head
OEM style Hardened Guides!
Metric Amada Style Standard & Air Blow 1¼ Station B SIZE RANGE .501-1.250”/12.7-31.7mm
COMPONENT PARTS C.E. Too Part # Amada $Round Amada $Shape
PUNCH HEAD • Solid AT-B-Hm 93502k 10.70
COIL SPRING AT-B-Sm 90131K 13.95
DISC SPRING Set (20) AT-B-DS-m 55.65
SPRING RETAINER AT-B-SRm 90121K 13.95 Spring Retainer with Extended B Dimension to Give More Punch Life
For Punches After .08”/2,mm Grind (Red) ATBSR2 For Punches After .16”/4,mm Grind(Green) ATBSR4
O-RING ATAG-Oring-m 90090 1.65 Strip Guard Adhesive Disc *A06082 8.60 Pack of 10 pcs
PUNCH HEAD • Side Lock AT-B-Hm-SL 13.95
Heavy Duty 3/8” M.S.
• Max. material 3/8”/9,mm mild steel up to 3/4” diameter • 1º total back taper on punch tips to reduce gauling build up, and stripping pressure.
HEAVY DUTY Max. 3/8 M.S. C.E. Too Part # Amada $Round Amada $Shape
PUNCH ASSEMBLY ATBPA-m-hd* 111104 209.75 12104 268.60 DIE AT-B-D-* 21101 16.15 22104 43.95
DIE w/SLUG TRAP™ref. P1.12 ATB-Dst-* 29.95 48.70 SET Punch Ass’y HD & Die ATB-PADm-hd* 31104 225.80 32104 314.05
SET P. Ass’y HD Die=Slug Trap ATB-PADm-Dst* 230.05 32104 317.30 PUNCH HD High Speed Steel ATB-Pm-hd-* 41_04 59.95 42_04 102.75 GUIDE ATBG-m* 51104 69.60 52104 84.35
LO
Solid
Solid Punch Head
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 11 n
COLE ENGINEERED
• No Shimming, Lift and Turn of Spring Pack for .004/,1mm increments of adjustment. • Rapid Hit™ achieve faster nibblie rates when used on
Not For Use on Machines with Strikers >1.85” dia. or if striker doesn’t come down centered on punch
Method #2 Holder System
Install in all Sta.B turret pockets. Inventory only punch, stripper & die. Guide=RSP “removable Stripper”
DIE
1¼ Station B SIZE RANGE .501-1.250”/12,7-31,7mm Quick-Set™ Spring Canisters Amada Vipros Compatible
Spring Pack CAN Ass’y -Disc *AATB-CANmd 5000__ 115.00
O-Ring (Retainer to guide) ATBG-Oring-m 9009__ 1.65
O-Ring (Seal on punch head) ATBCAN-Oring 52__k 1.65 Strip Guard Adhesive Disc *A06084 8.60 Pack of 10pc
COMPONENT PARTS CE TOOL Part# Amada# PRICE
Spring Pack CAN Ass’y –Coil *AATB-CANmc 5000__ 75.75
Stripper Plate For RSP guide ATB-S-* 51165k 10.70 Stripper –abs w/Lub Notches ATB-Sabs-* 51865
a 15.00 52165K 25.40
52865a 27.85
Standard Metric Amada Style Punch & Guide
Method #1 Punch Assembly C.E. Part # *= r-round s-shape
Amada Part# $ROUND $SHAPE
Punch Assembly D2 “ “ “ “ M2
ATB-PA-m-qc-* ATB-PA-m-qc-hs-*
195.85 237.55
Above Priced with Solid Guide & Coil Spring +$__ for disc springs
DIE ATB-D-* 16.15 43.95
DIE w/SLUG TRAP™ ATB-D-st-* 29.95 78.70
Method #2 Holder System *A-ATB-QHm-rsp* 192.60 267.50 Removable Stripper Button style Guide, Spring Pack w/disc springs
Punch-D2, Die, Stripper ATB-PSDm-* 71.70 151.45
Punch-M2, Die, Stripper ATB-PSDm-hs-* 86.70 165.85
Punch-M2, Die=SlugTrap Stripper ATB-PSDmh-st* 90.95 174.45 For further parts, see Page 12, Metric: STANDARD AMADA COMPATIBLE
Air Blow MetricAmada Style Punch & Guide
Method #1 Punch Assembly ATB-PAv-q-* 246.10 310.30 Above Priced with Solid Guide & Coil Spring +$__ for disk springs -$__for Coil Spring Style
DIE ATB-D-* 16.15 43.95 DIE w/SLUG TRAP™ ATB-D-st-* 29.95 48.70 Method #2 Holder System *A-ATB-QH-v-rsp-* 288.90 342.40
Removable Stripper Button style Guide, Spring Pack w/disc springs Punch, Die, Stripper ATB-PSD-v* 113.30 188.90 1¼ Guide Vortec-RSP *A TB-Gv-RSP-* 109.15 162.65
For further parts, see Page 12, Metric: AIR BLOW AMADA COMPATIBLE
Method #1 PUNCH
ASSEMBLY Each tool size is inventoried as a complete punch and guide assembly · Faster change over and a more durable hardened guide
TM
C.E.TOOLINGTOOLS
PUNCHRAISES CLOCKWISE
CLOCKWISELOWERS PUNCH
COUNTERTWIST
Standard Vortec- Style Industry Compatible to Amada,
WLS, Ultra
Section-3 Page 12 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED INCH: Wilson Style Standard Original Series 80 1¼ Station B SIZE RANGE .501-1.250”/12.7-31.7mm
Standard Pricing is for Punch Tip Sizes .093 (2.3mm) and Above
WT COMPATIBLE
DESCRIPTION C.E. Tool Code No.
*= R-round S-shape
WT Code No.
PRICE ROUND
WT Code No.
PRICE SHAPE
PUNCH ASSEMBLY D2 ATB-PAi-* 01819 157.00 01831 227.55 PUNCH ASSEMBLY M2 ATB-PAi-hs-* 168.00 238.90 DIE ATB-D-* 0202,1/2 16.15 0202,5/6 43.95 DIE w/SLUG TRAP™ ATB-Dst-* 02194 29.95 02195 48.70 SET Punch Ass’y & Die ATB-PADi-* 169.10 257.40
SET Punch Ass’y HSS & Die ATBPADi-hs- 184.05 272.35
PUNCH D2 Steel ATBPi-* 01827 43.25 01839 81.00
PUNCH HS High Speed Steel ATBPi-hs-* 57.80 96.30
GUIDE Solid OEM Style ATB-Gi* 69.60 84.35 Stripper Plate for RSP Guide ATB-S-* 01890/ 10.70 01917 25.40
GUIDE -Removable Stripper ATBGi-rsp-* 2222 109.15 2223 123.05
HEAVY DUTY Max. 3/8 m.s. C.E. Tool Part# *= R-round S-shape WT# ST# $ Round WT # ST# $Shape
PUNCH ASSEMBLY HS ATBPAi-hd-* 111104 202125 209.75 12104 202135 268.60
DIE AT-B-D-* 21101 202131 202136 16.15 22104
202134 202141 43.95
DIE w/SLUG TRAP™ref. P1.12 ATB-Dst-* 202113 29.95 202143 48.70
SET Punch Ass’y HS & Die ATB-PADi-hd-* 31104 225.80 32104 314.05
SET P. Ass’y Die=Slug Trap ATB-PADi-Dst* 31104 230.05 32104 322.10
PUNCH HD Heavy Dutyl ATB-Pi-hd-* 41_04 202127 48.45 42_04 202137 86.45 GUIDE Solid OEM Style ATBGi-* 202129 69.60 52104 84.35 Stripper Plate for RSP Guide ATB-S-* 01890 10.70 01917 25.40
• Max. material 3/8”/9,mm mild steel up to 3/4” diameter • 1º total back taper on punch tips to reduce gauling build up, and stripping pressure.
OEM style Hardened Guides!
PUNCH HSS (M2) +1º Back taper to assist
stripping, and reduce
gauling
PUNCH 1/8º Back
taper to assist stripping, and reduce gauling
SPRING RETAINE
SPRING
OPTIONAL: Side Lock Punch HEAD
OEM style Hardened Guides!
COMPONENT PARTS C.E. Too Part # WT # $Round Amada $Shape
PUNCH HEAD Side Lock AT-B-Hi-sl 20.40 COIL SPRING AT-B-Si 01953 13.95 DISC SPRING Set (20) AT-B-DS-i 55.65 SPRING RETAINER AT-B-SRi 01824 5.90 O-RING ATAG-Oring-m 02222 1.65 Strip Guard Adhesive Disc *A06084 8.60 pack of 10pc
PUNCH HEAD = WT AT-B-Hi 1821 15.00
Optional RSP Guide with Side Load (No Retainer Ring Required). To Ass’y Price + RD +$16 SH+$22 + to
part# -rsp-*
GUIDE: Solid or Removable Stripper plate. Uses retainer ring to secure.
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 13 n
COLE ENGINEERED
Special Use DROP-IN Units 1¼” Sta. B SAVE$• Why tie up thousands of dollars stocking a Guide, Spring, Retainer, and P.Head for every tool size.
Purchase a Holder for each turret station, then order Punches and Dies or Drop-Sets for sizes you wish to stock. • Fast Tool Change, Increase Punch grind life with no shimming! (up to .28” 7,mm in .06” 1,5mm material)
C.E.’s SIDE LOCK PUNCH HEADS: Side Lock design squeezes the punch head threads together, achieving positive and quick adjustment of tool length. (Loosen bolt, turn head to adjust tool length, then re-lock bolt.)
C.E.’s SIDE LOADING STRIPPER Plate: Positive Retention, impossible to fall out during use. No Tools needed to replace stripper. Drop-Holders can use nearly any punch design, making current inventory compatible! Instructions: Screw C.E. Side Lock Adjustment Head on Punch. Slide an Open or Fitted Stripper in Drop-Holder. Drop Punch into Holder. Turn P.Head to Adjust tool Length so that punch tip sits .03-.06 below Stripper face. Lock Bolt in Punch Head.
1¼” Sta. B Heavy Duty Punch up to 3/8” 10 mm mild steel Size Range .031-1.25”/,8-31,7mm Rounds<.5”/12,7m+$5.00 to punch, Shapes<.5” + $8.00 Not for use in Auto Index stations, or turrets requiring adjacent placement of 2 holders (Example Aries) Ideal for EUROMACH
& LVD
DESCRIPTION C.E. Tool Code No.
*= R-round S-shape Code No.
PRICE ROUND
Code No.
PRICE SHAPE
DROP-IN HOLDER AT-B-DI-s WT02275 358.45
1¼m DROP-SET D2 Steel D2 Punch, Head, Stripper & Die
AT-B-PHSD-m* 86.70 166.40
1¼m PUNCH AESI Style D2 AT-B-P-m* AESI 41804A 44.40 AESI
42804A 81.00
1¼m Head Side Lock ATB-H-m special 10.70
1¼m DROP-SET HSS HSS Punch, Head, Stripper & Die
ATB-PHSDmhs* 97.80 181.40
1¼m PUNCH AESI Style HSS ATBP-M-HS 57.80 96.30
1¼i DROP-SET Inch S80 Style D2 Punch, Head, Stripper & Die
AT-B-PHSD-i* 86.70 166.40
1¼i PUNCH Inch S80 Style AT-B-P-i* WT 01827 43.25 WT
01839 81.00
1¼i Head Side Lock AT-B-H-i WT 01821
1¼i DROP-SET HSS HSS Punch, Head, Stripper & Die
ATB-PHSDihs* 97.80 180.85
1¼ PUNCH AESI Style HSS ATBP-i-hs 57.80 96.30
1¼” STRIPPER PLATE AT-B-S-* AESI51104A
WT01890 10.70 WT01917
AES52104A 25.40
1¼” DIE AT-B-D-* WT0202,1/2 AES21101K 16.15 WT0202,5/6
AES22104K 43.95
DIE w/SLUG TRAP™ ATB-D-st-* WT02194 29.25 WT02195 48.70
15.00
1¼i Standard WT Set Screw Heads can also be used.
1¼sl-i 1¼sl-m Side Lock Side Lock
GUIDE Side Load Stripper No clips or pliers required. Lift punch out and slide stripper out with your thumb.
DESCRIPTION C.E. Tool Code No.
*= R-round S-shape PRICE
ROUND PRICE SHAPE
1¼i Drop-Holder Keyed 0,90 & 45 + ATB-DI-ae 342.40
Original METRIC Amada Style Style 1¼m Station B 1¼m DROP-SET Metric style Punch D2, Head, Stripper & Die ATB-PHSD-m-* 86.70 166.40
PUNCH D2 Steel Metric Style ATBP-m-* 44.40 81.00
1¼ae-m P. Head Metric Style ATB-Hae-m 15.00
Inch Wt Series 80 Style 1¼i Station B 1¼i DROP-SET S80 style Punch D2, Head, Stripper & Die ATB-PHSD-i-* 86.70 166.40
1¼i Punch D2 Steel Inch Style ATBP-i-* 43.25 81.00
1¼ae-i P. Head Inch S80 Style ATB-Hae-i 15.00
1¼ Stripper Plate RPS ATB-Sm* 7.40 25.40 DIE ATB-D-* 16.15 43.95 DIE w/SLUG TRAP™ ATB-D-st-* 29.25 48.70
Maximum Material (mild steel)
Coil Spring .19”/5mm Optional Disc
Springs 1/4”/7mm Mild Steel
*AATBae-ds
For machines with Strikers > 1.85 Must Use Below
COLE ENGINEERED
Section-3 Page 14 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED Size Range 1.251-2.000”/31,76-50,8mm DESCRIPTION C.E. Part #
* R-round S-shape Amada# $ROUND Amada# $SHAPE
SET Punch, Die & Stripper pch thread m=metric or i= inch Stripper Styles am, wt, or u
ATC-PDSm-am ATC-PDSm-u-* ATC-PDSi-am* ATC-PDSi-wt-*
31106k Wt_____ 148.75 32106K
Wt_____ 264.30
PUNCH D2 tool steel m=metric or i=inch threads
ATC-Pm-* ATC-Pi-*
41106K Wt_____ 69.55
42106K Wt_____ 115.60
PUNCH HS high speed ATC-Pm-hs* 41___ 95.25 42___ 142.35
STRIPPER 3 Styles Available AM, WT, U
ATC-S-am-* ATC-Swt-* ATC-Su-*
51106K
Wt_____ 25.90 52106K
Wt_____ 35.35
Strip Guard Adhesive Discs *A06085
DIE only ATC-D-* 21106K 55.85 22106K 104.85
DIE w/SLUG TRAP™ ATC-D-st-* 73.35 124.15
for pack of 10
STANDARD AMADA COMPATIBLE C.E. Part # Amada# $Price
LS Guide Assembly *A ATC-GA 90012K 500.00
PUNCH HEAD ATC-PH 90102 32.10
S.H.C.S. (M8X20) ATCDE-8X20 99975 .55
SPRING DISC (18) ATC-SD 90132 102.75
LS PUNCH DRIVER ATC-PD 90112 53.50
Draw Bolt i=1/2”or m= M12 X50 ATC-DB_X50 99944 3.75
LS Guide Keyed 0,90 & 45º *A ATC-G 90072 331.70
KEY (W/M5X8 FH) AT-C-K 90142 35.60
STRIPPER CLIPS W/SCREWS ATCDE-SC 90136 16.60
PUNCH HEAD
DISC SPRING (18)
PUNCH DRIVER
STRIPPER CLIPS (4)
LS™ Lubrication System Take advantage of machine features that allow lubrication through striker (ABS or ALS), with out having to buy expensive holder stystems, often requiring expensive specialty tools such as Vortec™ or Ultra™. You can also manualy fill reservoir with 80-90-weight oil for built in Self Oiling System. Provides lubrication between the punch, guide & turret.
Guide Keyed 0, 90 & 45°
StandardAmada Style Full Body Style 2_Sta.
m Metric M12 threads or
i Inch ½” threads
Punches Equiped with Puller M8 threads
Strippers recessed 2mm for greater punch grind life
Amada Compatible Range 1.182-1.850”/30,01-47,mm
Sta. C, 2” C.E. Tool
Code No. Amada part#
PRICE ROUND
PRICE SHAPE
PUNCH HS steel M14 AT-C-Pv-* 4 1/2 809A 96.30 144.45 STRIPPER Bolt On AT-C-Sv-* 5 1/2 809A 85.60 101.65 STRIPPER Z-style ATC-S-mv-* 5 1/2 896A 33.20 44.95 DIE only AT-C-D-* 2 1/2 106K 55.85 104.85 DIE w/SLUG TRAP™ AT-C-D-st-* 73.35 124.15 Stripper Plate Bolts 4pc AT-CDE-SB-vo 3.75 M14 Bolt w/Trhru Hole AT-CDE-DB-M14X70 90630A 19.30
Vipros-ABS Holder Bolt on Stripper Style
Shown
AIR BLOW & Z-Style Tools
STRIPPER STYLES AM Style for use in CE, or
Amada mfg. Guides ST Style Stripper for use
with Strippit Mfg.Guide+$5.00
WT Style for use with WT Mfg. Guides
U Style for use with Mate
Components compatible for use in Holders Mfg. By CE, Amada, Wilson(Standard & WLS) and Mate® Ultra
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 15 n
COLE ENGINEERED
DESCRIPTION C.E. TOOL CAT. CODE
WT CAT.CODE
ROUND PRICE
WT CAT.CODE
SHAPE PRICE
SET Punch,-D2 Die & Stripper ATC-PDSwt-* 133.75 236.50 SET Punch,-M2 Die & Stripper High Speed ATC-PDSwt-HS* 161.60 257.90 PUNCH D2 Tool Steel ATC-Pwt-* 05026 62.10 05025 104.30 PUNCH High Speed Steel ATC-Pwt-hs-* N/A 70.65 N/A 109.15 STRIPPER Standard ATC-S-wt-* 01848 25.90 01854 35.35 STRIPPER “abs” ATC-S-wt-abs-* 05150 34.25 05151 46.05 DIE ATC-D-* 0185,0/1 55.85 0185,5/6 104.85
DIE “W/SLUG TRAP ATC-D-st-* 02196 73.35 02197 124.15
STRIP GUARD Urethane Adhesive Discs Prevent Marking of Material See Page 5
Punch Options: Coatings or Premium Steel:BEST VALUE: Our optional High Speed Steel. Greater Tool Life than our competitors tools even when coated with TiN (gold)coating.
Further, CE also has TiCN (grey/blue). Coatings available on either of our steels to extend the greatest tool life!
Adapters
enable use of S80/90/HP
Punches and Strippers in
Standard Full Body Punch
Holders. Adapter
Only *A-ATCADWT
$175
Holder & Adapter Compete *A-ATCGAWT $675.
Station C, 2”wt Wilson Style HP™, Series 90® Compatible
For HP™ , LS™ , S80, 90, 90abs, 90wls Holder Styles Although CE manufactures tools to be fully interchangeable with Wilson Tool’s HP™ & Series 90® products, there is no affiliation
between Wilson Tool and CE Tooling. HP™ & Series90® is a registered trade mark of Wilson Tool International.
SIZE RANGE 1.251-2.000”/31,76-50,8mm
See Booklet Section 14 for WT Holder Parts
WT Style Push Button Adjustable Length Holder
Part# *AATCGA80 $930.75
Wire Stripper Retainer being fazed out. New units will use 4pc Industry Standard Clip.
Section-3 Page 16 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED Size Range 2.001-3.500”/50,81-88,9mm AMADA COMPATIBLE
DESCRIPTION C.E. Part #
* R-round S-shape Amada Code No.
$ Price Round
Amada Code No.
$ Price SHAPE
SET Punch, Die & Stripper pch thread m=metric • i= inch Stripper Styles am, wt, or u
ATD-PDSm-am ATD-PDSm-u-* ATD-PDSi-am* ATD-PDSi-wt-*
31108K
Wt_____
222.60 32806
K
Wt____
359.80
PUNCH D2 tool steel m=metric or i=inch threads
ATD-Pm-* ATD-Pi-*
41108K
Wt____ 99.55 42108K
Wt____ 159.20
PUNCH high speed ATD-Pm-hs-* 41___ 131.65 42___ 209.75
STRIPPER Available as am, wt, u
ATD-S-am-* ATD-Swt-* ATD-Su-*
51108K
Wt____ 31.75 52108K
Wt____ 52.90
Strip Guard Adhesive Discs *A06086
DIE only ATD-D-* 21108K 78.45 22108K 147.70 DIE w/SLUG TRAP™ ATD-Dst-* 98.45 161.50
66.90 for pack of 10
STANDARD AMADA COMPATIBLE C.E. Part # Amada# $Price
LS Guide Assembly *A ATD-GA 90013K 700.00
Punch Head ATD-PH 90103 40.70
S.H.C.S. (M8X20) ATCDE-8X20 99975 .55
Spring Disc (7) ATDE-DS 90133 146.90
LS Punch Driver ATD-PD 90117 107.00
DRAW BOLT i=1/2”orm= M12 X70 ATDE-DB_X70 99948 3.75
LS Guide Keyed 0,90 &45º *A ATD-G 90065 390.55
Key (W/M5X8 FH) AT-DE-K 91011 34.25
STRIPPER CLIPS W/SCREWS ATCDE-SC 90136 16.60
PUNCH HEAD
DISC SPRINg (7) Required
PUNCH
STRIPPER CLIPS
PUNCH DRIVER
CE G
uide
Key
ed
0,90
& 4
5°
m Metric M12 threads or
i Inch ½” threads Punches Equiped with
Puller M8 threads
Strippers recessed 2mm for greater punch grind life
AM Style Stripper for use in CE, & Amada mfg. Guides
ST Style Stripper for use with Strippit
Mfg.Guide+$5.00
WT Style Stripper for use with Wt Mfg.
Guides U Style fits with Mate
Mfg. Guides
Amada Compatible Range 1.851-3.370” 47,01-85,6mm
DESCRIPTION C.E. Part# *= R-round S-shape
PRICE ROUND
PRICE SHAPE
PUNCHHS M14 thread AT-D-Pv-* 107.00 169.60 STRIPPER Bolt On AT-D-Sv-* 107.00 117.70
DIE only AT-D-D-* 78.45 147.70 DIE w/Slug Trap™ AT-D-D-st-* 98.45 161.50 Stripper Plate Bolts 4pc AT-CDE-SB- 3.75 M14 Bolt w/Trhru Hole ATCDEDBM14X70 19.30
4 1/2 808K 5 1/2 808A
2 1/2 108A
STRIPPER Z-style AT-D-Smv-* 5 1/2 898A 46.05 66.90
Standard Amada Style Full Body 3½” Sta. D
AIR BLOW & Z-Style Tools
LS™ Lubrication System Take advantage of machine features that allow lubrication through striker (ABS or ALS), with out having to buy expensive holder stystems, often requiring expensive specialty tools such as Vortec™ or Ultra™. You can also manualy fill reservoir with 80-90-weight oil for built in Self Oiling System. Provides lubrication between the punch, guide & turret.
Components compatible for use in Holders Mfg. By C.E., Amada, Wilson(Standard & WLS) & Mate® Ultra
Vipros-ABS Holder Bolt on Stripper Style
Shown
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 17 n
COLE ENGINEERED
DESCRIPTION C.E. TOOL CAT. CODE
WT CAT.CODE
ROUND PRICE
WT CAT.CODE
SHAPE PRICE
PUNCH D2 Tool Steel ATD-Pwt-* 05028 81.35 05027 124.70
PUNCH High Speed Steel ATD-Pwt-hs-* N/A 120.40 N/A 149.80
STRIPPER Standard ATD-S-wt-* 01864 31.75 01869 52.90 STRIPPER “abs” ATD-S-wt-abs- 05152 447.60 05153 69.95
DIE ATD-D-* 0186,5/6 78.45 0187,0/1 147.70 DIE “W/SLUG TRAP ATD-D-st-* 02198 98.45 02199 161.50
SET Punch,-D2 Die & Stripper ATD-PDSwt-* 207.35 330.10
SET Punch,-M2 Die & Stripper High Speed Steel ATD-PDSwt-HS* 343.45 354.75
Punch Options: Coatings or Premium Steel:BEST VALUE: Our optional High Speed Steel. Greater Tool Life than our competitors tools even when coated with TiN (gold)coating. Further, CE also has
TiCN (grey/blue). Coatings available on either of our steels, to extend the greatest tool life!
For HP™ , LS™ , S80, 90, 90abs, 90wls Holder Styles Although CE manufactures tools to be fully interchangeable with Wilson Tool’s HP™ & Series 90® products, there is no affiliation
between Wilson Tool and CE Tooling. HP™ & Series90® is a registered trade mark of Wilson Tool International.
SIZE RANGE 3.501-4.500”/88,92-114,3mm Station D 3-1/2”wt Wilson Style HP™, Series 90® Compatible
2” 10P *A06085 3-1/2 3.67 10pc *A06086 66.90 4-1/2 4.67 10pc *A0608_
STRIP GUARD Urethane Adhesive Discs Prevent Marking
Ds
Adapters enable use of S80/90 Punches and Strippers in Industry Standard Full Body Punch Holders.
Sta.D 3½ Adapter Only: *A-ATDADWT Full Holder *AATDGAWT $
*A-449
WT Compatible S80+ HoldersAvailable!
Part# *AATDH-EGLD1
Go To Booklet Section 14 for WT Holder Component Parts
Guide has BOTH Clip & Wire Ring Stripper Retainer
WT Style Push Button Adjustable Length Holder
Part# *AATDGA80 $1,304
Wire Stripper Retainer being fazed out. New units will use 4pc Industry Standard Clip.
Section-3 Page 18 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED SIZE RANGE 3.501 - 4.500”/88.92 - 114.3mm
PUNCH HEAD
DISC SPRING (7)
PUNCH DRIVER
STRIPPER CLIPS
GUIDE
STANDARD AMADA COMPATIBLE C.E. Part # Amada# $ Price
LS™GUIDE ASSEMBLY *A ATE-GA 90014K 850.00
PUNCH HEAD ATE-PH 90104 42.80
S.H.C.S. (M8X20) ATCDE-8X20 99975 .55
SPRING DISC (7) ATDE-SD 90133 146.90
PUNCH DRIVER ATE-PD 90114 128.40 DRAW BOLT i=1/2”orm= M12 X70 ATDE-DB-_X70 99948 3.75
GUIDE Keyed 0,90º *A ATE-G 90074 449.40
KEY (W/M5X8 S.H.C.S.) AT-DE-K 91011 34.25 STRIPPER CLIPS W/SCREWS AT-CDE-SC 90136 16.60
AMADA Compatible DESCRIPTION
C.E. Part # * R-round S-shape
Amada Code No.
$-Price Round
Amada Code No.
$-Price Shape
SET Punch, Die & Stripper punch thread m=metric or i= inch Stripper Styles am, wt, or u
ATE-PDSm-am ATE-PDSm-u-* ATE-PDSi-am* ATE-PDSi-wt-*
31109K
Wt____ 414.10 32109K
Wt____ 587.45
PUNCH D2 tool steel m=metric or i=inch threads
ATE-Pm-* ATE-Pi-*
41109K 161.60 42109K 246.10
PUNCH HS high speed ATE-Pm-hs-*
41____ 201.20 42___ 283.55
STRIPPER Available as am, wt, u
ATE-S-am-* ATE-Swt-* ATE-Su-*
51109K
Wt____ 59.95 52109K
Wt____ 84.55
Strip Guard Adhesive Discs
*A06086
DIE only ATE-D-* 21109K 179.80 22109K 230.15 DIE w/SLUG TRAP™ ATE-D-st-* 203.30 278.20
66.90 pack of 10
Components compatible for use in Holders Mfg. By C.E., Amada, Wilson(Standard & WLS) & Mate® Ultra
Amada Compatible Range 3.501-4.350”/88,9-110,5mm C.E. Part# $ Round $ Shape
PUNCH HS M14 thread AT-E-Pv-* 183.80 291.60 STRIPPER Bolt On AT-E-Sv* 139.10 155.15
DIE only AT-E-D-* 179.80 230.15 DIE w/SLUG TRAP™ AT-E-D-st-* 203.30 278.20 Stripper Plate Bolts 4pc AT-CDE-SB-v 3.75 M14 Bolt w/Trhru Hole AT-CDE-DB- 19.30
STRIPPER Z-style AT-E-Smv 69.55 90.95
4 1/2 809A 5 1/2 809A 5 1/2 899A
2 1/2 109A
StandardAmada Style Full Body Style 4½ Sta.
LS™ Lubrication System Take advantage of machine features that allow lubrication through striker (ABS or ALS), with out having to buy expensive holder stystems, often requiring expensive specialty tools such as Vortec™ or Ultra™. You can also manualy fill reservoir with 80-90-weight oil for built in Self Oiling System. Provides lubrication between the punch, guide & turret.
AIR BLOW & Z-Style Tools
m Metric M12 threads or
i Inch ½” threads
Punches Equiped with Puller M8 threads
Strippers recessed 2mm for greater punch grind life AM Style Stripper for use in CE, & Amada mfg. Guides ST Style Stripper for
use with Strippit Mfg.Guide+$5.00
WT Style Stripper for use with Wt Mfg.
Guides U Style fir ys with Mate Mfg. Guides
Add Diagram for Mate Ultra
Vipros-ABS Holder Bolt on Stripper Style
Shown
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 19 n
COLE ENGINEERED
Wilson Style HP™, Series 90® Compatible SIZE RANGE
3.501-4.500”/88,92-114,3mm For HP™ , LS™ , S80, 90, 90abs, 90wls Holder Styles
Although CE manufactures tools to be fully interchangeable with Wilson Tool’s HP™ & Series 90® products, there is no affiliation between Wilson Tool and C.E. Tooling. HP™ & Series90® is a registered trade mark of Wilson Tool International.
Station E, 4-1/2”wt
DESCRIPTION C.E. Part # WT Part# ROUND PRICE WT part#
SHAPE PRICE
PUNCH D2 Tool Steel ATE-Pwt-* 05030 123.05 05029 190.50 PUNCH .25”&<X 4”&> High Speed Steel ATE-Pwt-hs-* N/A 155.15 N/A 233.30 STRIPPER Standard ATE-S-wt-* 01877 59.95 01882 84.55 STRIPPER “abs” ATE-S-wt-abs-* 05154 74.90 05155 98.45 DIE ATE-D-* 0187,8/9 179.80 0188,3/4 230.15 DIE “W/SLUG TRAP ATE-D-st-* 02200 203.30 02201 278.20
SET Punch,-D2 Die & Stripper ATE-PDSwt-* 364.90 531.80 SET Punch,-M2 Die & Stripper High Speed Steel ATE-PDSwt- 397.00 574.60
2” 10P *A06085 3-1/2 3.67 10pc *A06086 66.90 4-1/2 4.67 10pc *A0608_
STRIP GUARD Urethane Adhesive Discs Prevent Marking
Punch Options: Coatings or Premium Steel:BEST VALUE: Our optional High Speed Steel. Greater Tool Life than our competitors tools even when coated with TiN (gold)coating.
Further, CE also has TiCN (grey/blue) Coatings available on either of our steels, to extend the greatest tool life!
Go To Booklet Section 14 for WT Holder Component Parts
Guide has BOTH Clip & Wire Ring Stripper Retainer
Adapters enable use of S80/90 Punches
and Strippers in Industry Standard Full Body Punch Holders.
Sta.E 4½ Adapter Only: *A-ATEADWT
$294.25 Full Guide
Assembly =Holder *AATEGAWT
$1,100.00
Section-3 Page 20 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
Standard, LS™, & Vortec™ Style Shearing Tools 3½” Sta. D Stocked Sizes .25”X3” & 5,mmX84,mm 4½” Sta. E Stocked Sizes .25”X4” & 5,mmX110,mm
AMADA COMPATIBLE C.E. Tool ## AMADA# $ Sta. D AMADA# $ Sta. E C.E. Tool # AMADA# ABS
$Sta. D AMADA# ABS
$ Sta. E
PUNCH D2 steel AT_P-m-S 42108 159.20 42109 246.10
PUNCH HSS steel AT_P-m-HS 209.75 283.55 AT_Pv-s 169.60 291.60 STRIPPER PLATE AT_S-bp-sh 52916 240.75 52917 272.85 AT_Sabs- 52916A 52917A DIE only AT_D-sh-S 22916 214.00 22916 314.60 AT_D-sh-s 22916K 214.00 22916K 314.60 DIE w/SLUG TRAP™ AT_Dsh-st- 240.75 341.35 AT_Dshst-s 240.75 341.35 GUIDE ASSEMBLY Excludes Punch & Stripper *aAT_GAsh 90016 790.50 90017 1005.80 *aAT_GAsh 90016a 90017a
PUNCH HEAD AT_PH 90010 40.70 90105 42.80
SPRING DISC (7) ATDE-SS 90133
PUNCH DRIVER AT_PD 90113 107.00 90117 128.40
Draw Bolt 12x70 ABS=14x70 ATDE-DB- 99948 3.75
GUIDE Keyed 0,90º *a AT_G-sh 90916 410.10 90065 443.80
KEY (W/M5X8 FH) AT-DE-K 91011 34.25
STRIPPER PLATE BOLT ATCDE-SB 99941 16.60
146.90
Standard Amada, or LS™ STYLE ABS Vortec or LS™ Style Holders
Sta. D 3½”
WORK CLAMPS *= PUNCH KEY
*
*
*
*
*
*
Sta. E 4½”
Reduce cost of common used slotting punches Size Range Width .125 (3,mm) - .500 (12.7mm)
Length 1.968” (50,mm) -4.400(110,8mm)
Note: Our High Speed Steel Blades offer reduced gauling and greater wear
resistance than our competitions D2 or A8 Steel,
even when coated with TiN or TiCN
+ Either TiN or TiCN coating to CE blades
Add $45.00 and 5 Days to Delivery. Order 3+ Blades, pay only $30.00 per
blade.
Industry Standard Insert Blades Ref. AES # 90115A, 90120A, 90116A,
90121A, WT# ________ SHEAR + to insert cost
Single Inverted $8.00 Double Inverted $15.00
BODY COST Station Catalog Code PRICE
D, 3-1/2_ *A-ATD-IH_ E, 4-1/2_ *A-ATE-IH_
_=m-M12 or i-1/2” Thread Vortec ABS Style D, 3-1/2v *A-ATD-IHv E, 4-1/2v *A-ATE-IHv
CE or WT INSERT BLADES & HOLDERS Compatible with CE, WT, and similar Mfg. Blade Holders.
BLADE CE Part# WT # PRICE 1+
1.968 - 3.400 50,mm - ATD-IB-RT
1967 5657 3193 128.40
3.401-4.400” 86,mm-110,mm ATE-IB-RT
1970 5630 161.60
Spare Bolts w/lock washer
ATE-IH-BW 2.70
SHCS 3/8-16 X 1 1/2” Long
Price 3+
123.30
155.15
2.60
Price 6+
Insert BLADES For use in Original Full Body Holders
Amada Style 6” Sta. F SIZE RANGE 4.501-6.000”/114.3-152.4mm
DESCRIPTION CE PART # ROUND SHAPE
PUNCH ATF-P-m-* 417.30 483.65
STRIPPER ATF-S-am- 80.25 109.15
DIE ATF-D-* 270.75 379.85
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 21 n
COLE ENGINEERED
Original METRIC or Quick-Set™ Style Packages Prices are not valid with any other discount program • Distributors: Limited Commission/Discounts available
Further, we would suggest buying 2 sets of .250X4.000 Rectangle to be used in your largest station as slotting tools, one set 0 ° one 90°. Cost for these would be $ (extra dies $)
Total Cost for 9 package A-I, (no Sp44 or Counter Sinks) is $, With extra, 2 sets of dies $
Send in your own specific tooling list to receive an itemized quotation!
Package 21 ROUNDS ½m Punch Assemblies & Dies
*AATTP3A .093 .098 .125 .128 .141 .156 .172 187 .194 .203 .219 .250 .266 .281
.312 .344 .375 .406 .437 .469 .500 Extra Set of Dies *AATTP3Ad
A
P
SPR
SPRET
GU
PU
GROLOC
Package 22 ROUNDS Sta. C:22,Punches & Dies,
6 Strippers Sta. D: 10,Punches & Dies,
5 Strippers *AATTP3C 1.312 1.375 1.437 1.5 1.562 1.625 1.687 1.75 1.812 1.875
1.937 2” 2.125 2.25 2.375 2.5 2.625 2.75 2.875 3” 3.25 3.5”
22 Extra Dies *AATTP3Cd
Package 4 SQUARES 4 Punches & Dies, 2 Stripper
*AATTP3E 1”square Sta.C & 2”sq. Sta.D
Extra Set of Dies*AATTP3Ed
Package 4 RECTANGLES 4 Punches, 2 Stripper, 4 Dies.
Sta.D *AATTP3G .200X2”& .250X2”
Sta.C .200X3”& .250X3” Sta.D/Stripper .250X2.0”
& .250x3.0” 4 Extra Dies *AATTP
2” Sta. C Guide Assemblie ATCGA $. ea<5%
Package of Four (4) *AATTP3L
3½”Sta.D Guide Assemblies ATD-GA $ ea. <5%
Package of Four (4)*AATTP3M
4½” Sta.E Guide Assemblies ATE-GA $ ea. <5%
Package of Two (2)*AATTP3N
Further: (4) Sta.C 2” Guide Assemblies which are $ 505.05 each Save 5% on 4pc=1919.19 (2) Sta.D 3-1/2” Guide Assemblies which are $ 711.55 each Save 5% on 2pc= $1351.95 (2) Sta.E 4-1/2” Guide Assemblies which are $ 845.30 each Save 5% on 2pc= $1606.07
Package TP3F 6 Rectangles 6 Punch Assemblies & Dies
*AATTP3F .125X.5” .125X1.0 .187X.5” 250X.5” .250X1.0 .375X1.0”
Extra Dies *AATTP3Ed
PUNCH HEA
SPRINGRETAINER
GUIDE
PUNCH
STRIPPER
PLATE (RSP
SPRING
GROUND
LOCATION KEY
Package 19 ROUNDS 1¼m Punch Assemblies & Dies
*AATTP3B .515 .531 .562 .594 .625 .656 .687 .719 .750 .781 .812 .844 .875 .937
1.000 1.062 1.125 1.187 1.250 Extra Dies *AATTP3Bd
PUNCH
SPRINRETAIN
GUID
PUN
STRIP
PLATE
SPRIN
GROUN
LOCATION
Package 7 SQUARES 2 ½m Punch Assembly & Die
5 1¼m Punch Assembly & Die *AATTP3D
.25sq .313sq .375sq .438sq .500sq .750sq .875sq
Extra Dies*AATTP3Dd
ADJUSTABLE
PUNCH HEAD
SPRING
SPRINGRETAINER
GUIDE
PUNCH
GROUNDLOCATION KEY
PUNCH H
SPRINGRETAINER
GUIDE
PUNC
STRIPPE
PLATE (R
SPRING
GROUND
LOCATION K
Package Sp-44 4-Way Radius 4way .2web Radius Tools
Quantity 5: Punch Ass’y&Dies *AATTP3J
.063, .125, .188, .25, .312 5 Extra Dies *AATTP3Jd
Package 4-82º Countersink 1 Holder 4 Inserts 4 Dies
*AATTP3K #4, #6, #8, #10 Screws Ref. P7-9
Package 9 OBROUNDS 4 ½m Punch Assemblies & Dies
5 1¼m Punch Assemblies & Dies *AATTP3H
.125X.375 .187X.375 .219X.5 .25X.5” .25X1” .312X1” .375X1”
.437X.875 .5X1” Extra Dies*AATTP3Hd
ADJUSTABLE
PUNCH HEAD
SPRING
SPRINGRETAINER
GUIDE
PUNCH
GROUNDLOCATION KEY
PUNCH
SPRINRETAINE
GUIDE
PUN
STRIPP
PLATE (
SPRIN
GROUN
LOCATION
Package 6 OBROUNDS 6 ½m Punch Assemblies & Dies
*AATTP3I .01” wider & 2X dia. of screw size .122X.224 .148X.276 .174X.328 .200X.380 .226X.437 .26X.5”
Extra Dies *AATTP3Id
Tool Storage Racks and Carts See our Section 10 Retail Booklet for details
Upgrade to Quick-Set™ units for all 1/2 & 1¼ + $40.00 for every 1/2” Sta. A Punch Assembly, +$ for all 1¼ Punch Assemblies.
Cost for the 9 different packages (Sp-44 & Counter sink not included) listed above totals $____With an extra set of dies (different clearance) add $3,353.40 = $16,678.80
COLE ENGINEERED
Section-3 Page 22 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
ADAPTERS for Popular Tool Styles USE MANY POPULAR TOOL STYLES IN YOUR THICK TURRET MACHINE
C=2” through E=4½ Punch Adapters are either designed to install in Industry Standard Guide Assemblies. (shown left) If described as Driver Adapter, you must replace standard driver and replace with Adapter Driver. Also Center bolt is changed.
Style St Thick Turret Adapter station and Adapter Price
112/212 B B=1¼m Punch Adapter
suggested for use with QuickSet Holder
ATB-2WB-P *AATBQHmrsp-s
112/212 C C=2”
Punch Adapter
For use in Full Body style
Guide Assembly
ATC-2WC-P
112 2W
D ATB-2WD-P
ATB-2BD-P E
D=3½ ATB-2WEF-P F G E=4½ ATB-2WG-P
212 =2B =906
D D=3½
Driver Adapter For use in Metric Style Guide As-
sembly Ref. 3-10&11 To purchase com-
plete Adapter Guide Assembly, take
standard LS Guide price, - standard Driver + Driver-
ATB-2BD-P E
ATB-2BEF-P F G E=4½ ATB-2BG-P
114
=4W
B C=2” ATB-4WB-P C D=3½ ATB-4WC-P D D=3½ ATB-4WD-P E E=4½ ATB-4WEF-P F F=4½
112 =2W
or 212 =2B =906
B B=1¼
Die Adapter
ATC-2WB-D C
C=2” ATC-2WC-D
D ATC-2WD-D E
D=3½ ATD-2WE-D
F ATD-2WF-D G E=4½ ATE-2WG-D
212 Set:4½ Sta.E(Full Body ATE-2BG-PD
114 =4W
C 114 Sta. Set: 2” Sta.C(Full Body ATC-4WB-PD C 114 Set: 2” Sta.C(Full Body ATC-4WC-PD D 114 Sta. Set:3½”Sta.D(Full Body ATD-4WD-PD E 114 Sta. Set:4½ Sta.E(Full Body ATE-4WE/F-PD TRUMPF Size I Punch Adapter ATC-TR1-P TRUMPF Size I Die Adapter For ATC-TR1-D TRUMPF Size 2 Punch Adapter ATD-TR2-P TRUMPF Size 2 Die Adapter For ATD-TR2-D
TRUMPF
TR
Strippit® Punch Adapter Only
Adapter Description 10 gage Max. Material
Adapter Cat.Code
Price
1¼ ” for Sta. B 1¼” Sta. B Punch Adapter ATBP-STCP
Comes Complete with Drop-In style Holder, which excepts Replaceable Stripper Plates
Station Adapters for Thick Turret
KEYED 0,90,180,270
To Use Description Cat. Code Price A in B Punch ATB-P-adapter $214 A in B Die ATB-D-adapter $192 B in C Punch ATC-BPA $385 B in C Die ATC-BDA $321 B in D Punch ATD-BPA $385 B in D Die ATD-BDA $321
Sta. A to B 1/2” to 1¼
Shown
Replaceable Stripper Plates Use Stripper with larger Round Open-
ings, or get fitted strippers .010 > punch size.
1¼ Stripper Plate ATB-S-* RD= Shaped=
3½” for Sta. D 2” Sta. D P.Adapter For punches up to 2” dia.
ATCP-STEP
3½” for Sta. D 3½ Sta. D Punch Adapter For punches up to 3.5” dia.
ATDP-STEP
3½” for Sta. E 4½ Sta. E Punch Adapter For punches up to 3.5” dia.
ATEP-STEP
Below adapts Strippit 3-1/2” Punches to 2”, 3-1/2” or 4-1/2” Sta. C, D or E Thick Turret
Holder styles which accept Full Body Punches. Thick Turret Stripper plates should be ordered for use with Strippit punch/ See Section 3 page 16-20
See Section 3 page 11 for de-tails on both styles of Drop-In
Holders shown here.
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 23 n
COLE ENGINEERED
.6299 16.0mm
3.93
7”
100m
m
1/8
Dow
el
.812HX.246 .3dX.025 Hit Pointt
63”
MTQ-8 .030-0.630” 8-16.0mm PUNCH or DIE Grind Life: .060”/1,5mm
.29”
1.052”diameter .125 thick
1.000” 25.4mm
LVD
MT
& S
tripp
t Thi
ck
.70”
=17.
8mm
3/16 dowel .34 up
STATION Shape Punch Part#
PRICE M2 Steel
Die Part#
PRICE A2 Steel
Stripper Part#
PRICE
SET Part#
PRICE
N 8 Sta.
Round MTNP-r 25.70 MTND-r 27.85 MTNS-r 7.50 MTNPDS-r 61.00
Shape MTNP-s 62.10 MTND-s 51.40 MTNS-s 15.55 MTNPDS-s 129.50
NISSHINBO MULTI-TOOL (MT) Pricing is for Punch Tip Sizes .093(2,3mm) & Above
8 Stations for Sta. D auto index
CE style N Range .030-0.630” 8-16.0mm PUNCH Grind Life: .060”/1,5mm Minimum length = DIE Grind Life: .06”/1,5MM Minimum length =
Slug Trap™ Die
.290” • 1.052Ø
1.000” 25.4mm
.7
17,8
mm
Shapes, 3/16 dowel X .10 extention
1.052”diameter 125 thick flange
. ” mm
”
mm
1/8 Dowel
. ”
Strippit/LVD Multi-Tool (MT) Pricing is for Punch Tip Sizes .093(2,3mm) & Above
STATION Punch Part#
PRICE M2 Steel
Die Part#
PRICE A2 Steel
Stripper Part#
PRICE
SET Part#
PRICE
Q 8 Sta.
Round MTQP-r MTQD-r MTQS-r MTQPDS-r
Shape MTQP-s MTQD-s MTQS-s MTQPDS-s
Round MTRPh-r MTRD-r MTRS-r MTRPhDS-r Shape MTRP-s MTRD-s MTRS-s MTRPhDS-s
R 3 Sta.
MTR-3 -01.250” -31.75mm PUNCH or DIE Grind Life: .060”/1,5mm
..594
” Tal
l=S
TMT3
D*
.25” 1.572ØX1.43 120”flange
Punch= ATBPwL* Head= MTRH
.594
” 1.875 47.6m...
3/16 Dowel
Section-3 Page 24 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
EXCLUSIVELY From C.E. TOOLING The QUICK-SET™ This patented tool length adjustment unit allows for set up of form
tools length to as close as .0025” with only a lift and turn of
the outer knurled collar.
Length can’t change during use. A half to one hour set up time
is now reduced to minutes.
SPECIAL APPLICATION FORMING TOOLS HIGHER PRODUCTIVITY THROUGH SUPERIOR ENGINEERING
THREAD FORM DOWN ONLY
C
C.E.TOOLING
TO ADJUST, LIFT & TURN
Replaceable Top Inserts *FIP81 Bottom *FID81 Ordering Notes: Order by Screw & Thread size Limitations Thread Pitch must be < than material thickness. Contact C.E. Tooling Engineers with your specific needs, and they can discuss the feasibility and pricing for Thread
EMBOSSES ROUND OR SHAPED
Form Down Sp74 Form Up Sp63
D < 45º DIE w/Built in Stripper Quick-Set™ Punch and Die Cat. Code *FAT_PD-D72
D >= 45º DIE w/No Stripper Quick-Set™ Punch and Die Cat. Code *FAT_PD-D72
AB
CD
D < 45º DIE w/Built in Stripper Quick-Set™ Punch and Die Cat.
Code *FAT_PD-U63
D>= 45º DIE w/No Stripper Quick-Set™ Punch and Die Cat.
Code *FAT_PD-U63
A
B
C
D
EXTRUSION
BRIDGE TOOL SINGLE Sp-65 DOUBLE Sp-66
A
B
C
D
E
EF G
SP-65 SP-66
GROUND SYMBOL Keyed 4 Ways Standard=1/2”Ø +$50 for non standard Longest horizontal line=3/8 length DOWN 1¼ w/Quick-Set $ ½” no Quick-Set UP 1¼ w/Quick-Set ½” not available DOWN 1¼ w/Quick-Set $ ½” no Quick-Set UP 1¼ w/Quick-Set $ ½” not available
A
B
R
Unlimited Length Width Nibbles
Standard “A” “B” “R” Size 3/8 3/16 3/16
Punch is made for a
specific material & thickness
Other sizes available
PROGRESSIVE STIFFENING RIB
ELECTRICAL KNOCK OUTS SINGLE Sp-60 DOUBLE Sp-61
ABC A BC
D
Pipe Actual Size Pipe Actual
Size 1/2 .875 1½ 2.000 3/4 1.125 2” 2.500 1” 1.375 2½ 3.000 1¼ 1.750 3” 3.625
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 25 n
COLE ENGINEERED
LOUVER & CARD GUIDE TOOLS
C
B
D
E
AA
BCD
(11 GAGE MAX.)
(11 GAGE MAX.)
DIE ASS'Y FOR LOUVER'S DIE ASS'Y FOR CARD GUIDE
POCKET INSERT
FORMINGINSERT
CUTTINGINSERT
INSERT
FORMING INSERT
TO ADJUST, LIFT & TURN
C.E. TOOLING OFFERS BOTH STANDARD AND PROGRESSIVE STYLE LOUVERS AND CARD-GUIDES. PROGRESSIVE TOOLS ARE MADE TO EXACT MATERIAL THICKNESS. THE LENGTH IS UNLIMITED THROUGH NIBBLING OPERATION. Reference P3.23 for further information
Standard LOUVER Sizes
Form Down LOUVER STD. PUNCH INSERT FOR
MASTER HOLDER
“A” Length “B” “C” “D”
2” 2-1/2” 1/2” 3/16” 3/4”
3” 3-1/2” 5/8” 1/4” 15/16
4” 4-1/2” 3/4” 1/4” 1-1/8”
PROGRESSIVE STIFFENING RIB
A
B
R
Unlimited Length Width Nibbles
Other sizes available
Standard “A” “B” “R”
Size 3/8 3/16 3/16
Punch is made for a specific material thickness
Sheet Lifter Dies
Lifter dies are placed in your turret on each side of a special forming tool. When the sheet passes through this section of the turret, these lifter dies will lift the sheet up to the height of the form die, preventing the sheet from colliding with the forming die which at times causes the sheet to break the grip of the work holder clamps.
1/2” Sta-A ATAD-Lifter
1-1/4” Sta.B ATBD-Lifter
LANCE & FORMS
FORM OF 90 DOUBLE BEND
E=WIDTH
C C
D AB=.250 MAX.
SP-78 SP-80
C
LESS THAN 90
SP-79
OF TAB
DOUBLE BEND
A
SP-77
C
B
YLE
STYLE
LANCE STYLE
OPEN STYLE
FSTC-PSR
STC-QS-H
FSTC-PB-
OLD SPRING
TO ADJUST, LIFT & TURN
C.E.TOOLINGCOLE ENGINEERED
TOOLS
Section-3 Page 26 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
C.E.TOOLING
TO ADJUST, LIFT & TURN
Adjust the Quick-Set™ to its shortest length by lifting and rotating
of knurled collar clock wise.
MASTER PUNCH HOLDER
Code *FSTCMPH O-RING Code *FMPH
INSERT CHANGING INSTRUCTIONS: While holding die base, pull knurled portion of the insert plate apart from the die base. If replacing with new insert, first
check that I.D. hole in the stripper plate, is large enough to allow insert to go through. Insert the Insert Plate into die
assuring alignment of the pin extending out of the die base to mate with one of two holes in the stripper plate.
To keep the die base in good working order and prolong its life, periodically add grease to the shoulder bolts and the
rubber “O”-ring in the center I.D. hole.
INSERT PLATE Included with each die insert
STRIPPER PLATE .28 I.D. Cat. Code *FCDIPD 53” I.D. Cat. Code *FCDIPV
DIE BASE Cat. Code *FATBMDB
There are two different style inserts that can be used in this unit. One style of insert requires a .28”(7,mm) I.D. hole through the stripper plate. The second style has a .53”(25,4m) I.D. hole. (.28” I.D.Stripper is most common. It is used for Form up Extrusions and Half Shears. Use of .53 I.D Stripper is only used for form up coin tools.
for.
SAVE! MASTER FORM TOOL HOLDER Accepts Inserts to perform common form Aplications
WT Style Holder Units Amada Style Holder Units
PUNCH CHIP
INSERT RETAINER
Part#*FCPIR
URETHANE P.STRIPPER
Form-Down Yellow Part# *FCPUD
Form Up Orange Part# *FCPUU
Shown Standard Head Easy Adjust Head Available
Easy Adjust Head /Option + Solid Non-Insert Punch
Shown Below
CE offers Compatible Amada Style components for your exhisting tooling investment.
THOR D2
EASY ADJUST HEAD
C
B
D
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 27 n
COLE ENGINEERED
AB
.250 MAX.
Replaceable Insert Top *FIP51
Bottom *FID51
TWO HALF-SHEARS
USED FOR SHEAR STOPS
TWO HALF SHEARS USEDFOR ALIGNING TWO SHEETS
CENTER POINT
Replaceable Insert For CE Holder Top
*FIP58 Bottom *FID53 .
For WT Top *FIP58wt Bottom *FID53wt
Replaceable Insert For CE Holder Top
*FIP57 For WT *FIP57wt
For Amada . Use with No hole Die ATB
-Dr
HALF SHEAR FORM DOWN OR FORM UP
Master Unit Accepts Replaceable Half Shear Insert .25”(6,1mm) Maximum B dimension Dedicated Quick-Set Punch Holder and Die must be used for Inserts/Chips For CE Holder: Top *FIP51 Bottom *FID51 For WT Style Holder P.Chip = CE# *FIP51wt D.Chip = CE *FID51wt For sizes>.25”(6,1mm) *FIPWT56 For Amada Style Holder code Set PA203202S Punch Ass’y PA203202P Die Ass’y PA203202D P. Chip 8700069 = CE *FIP51am D. Chip 5511491 = CE *FID51am code=*fipWT-56 sizes > .25”(6,1mm)
Form Inserts for CE, WT & Amada Style Holders
COINING /Counter Sink Inserts/Chips For pre-pierce hole size, See chart/formula in Technical Reference booklet Section 1 pg 20
EXTRUSIONS INSERTS
A
BMAX..250
A
B.500
MAX.
Down *FIP54 Up *FIP50 & *FID50
HEIGHTDETERMINE
BY PRE-PUN
NO ROLL-OVER
PRE-PUNCHHOLE
C
B
D
A
HRECOMMENDED IF "H" ISTHICKER THAN MATERIAL
CE
B
C
.6320
CE Style Insert *FIPCE-56 Ø.500
.50
WT
BC
WT Style Insert *FIPWT-56
Ø.472
.58
AMADA
B
Amada Style Chip #43114 CE #*FIPTH-56 A
B
CD=ANGLE
.500 MAX.
Form Up
CEB
Dedicated die is suggested over
Sta.A 1/2” Dedicate Form Down Coin can be order in stan-dard style assembly. Penetration adjust-ment is accomplished with Side Lock Punch Head
Side Lock
Head ADJUSTABL
PUNCH HEA
SPRING
SPRINGRETAINER
GUIDE
PUNCH
GROUNDLOCATION KE
NCH
Section-3 Page 28 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
1¼ Sta.B Double
Row
1¼ Sta.B Single
Row
3½Sta.D Double
Row
FORM UP FORM DOWN
3½Sta.D Single Row
SET *FATD-SSU *FATD-SSD PUNCH *FATD-PBB *FATD-PSD
Cartridge *FATD-DCS *FATD-CS Die Complete *FATD-SDU ATD-D-s-0
2”Sta.C Single Row
SET *FATC-SSU *FATC-SSD PUNCH *FATC-PBB *FATC-PSD
Cartridge *FATC-DCS *FATC-CS Die w/C *FATC-SDU ATC-D-r
SET *FATC-SDU *FATC-SDD PUNCH *FATC-PBB *FATC-PDD Cartridge *FATCDCD *FATC-CD Die w/C *FATC-SDU ATC-D-r
Catalog Price Catalog Price SET *FATB-SSU 586.20 *FATB-SSD 533.35
PUNCH *FATB-PBB *FATB-PSD 265.90 Cartridge N/A *FATB-CS 155.15
Die Complete *FATB-SDU *FATB-SDD
SET *FATB-SDU *FATB-SDD
PUNCH *FATB-PBB *FATB-PDD
Die *FATB-DDU ATB-D-s-0
SET *FATD-SDU *FATD-SDD PUNCH *FATD-PBB *FATD-PDD
Cartridge *FATDDCD *FATD-CS Die Complete *FATD-DDU ATD-D-s-0
2”Sta.C Double
Row
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16
Qty Per Row 20 12 10 6 20 12 10 6
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16
Qty Per Row 20 12 10 6 20 12 10 6
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 48 31 24 16 50 32 25 16
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 32 20 16 10 32 21 16 10
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 32 20 16 10 32 20 16 10
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 48 31 24 16 50 32 25 16
4½Sta.E
Single Row
SET *FATE-SDU *FATE-SSD
PUNCH *FATE-PBB *FATE-PSD
Cartridge *FATE-DCD *FATE-CS
Die w/C *FATE-DSU ATE-D-S-0
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 20 12 10 6 16 10 8 5
4½”Sta. E Double
Row
SET *FATE-SDU *FATE-SDD
PUNCH *FATE-PBB *FATE-PDD
Cartridge *FATE-DCD *FATE-CS
Die w/C *FATE-DDU ATE-D-r
Character Width 1/16 3/32 1/8 3/16 1/16 3/32 1/8 3/16 Qty Per Row 20 12 10 6 16 10 8 5
FORM UP Keyed 0 & 180°
FORM UP Keyed 4plc.
CHARACTER MARKING TOOLS
Accessories: Plunger Screws *ACHLOCKB Cartridge Lock
Small *AchlockA Large *AchlockB
Ball Plunger *ASSPLG
FORM DOWN Rotate Cartridge for 4 way positioning
Dwg:Holder-F/ATBFP L10-13
FORM DOWN Rotate Cartridge for Extra Keying
Dwg:Holder-F/ATBFP L6-7
Dwg:Holder-F/ATCPCSB L8-13
Dwg:Holder-F/ATCFULSD L8-10
& 15-18 P.QS L11-13
Die-Shell *AATCDCHSH Die Shell–Stripper *AATCDCHSHS
DEDICATED MARKING UNITS Produced to stamp Logo’s, Names, Part No., etc.. Contact our tooling engineers to discuss your particular application. Camera Ready Art
Work or Cad-.DXF/.IGES files are required for Logo’s. Dedicated form tools can be produced to stamp Logo’s, Names, Part No., etc..
SHARP FACE CHARACTER STAMP INSERT HOLDERS Available 1/16, 3/32, 1/8, & 3/16 width X ¼ height. 1/8 is standard blanks/spacers cost = 50% to
regular character price 1/8 *ACHAR⅛ stamps .09X.15 1/16 *ACHAR1/16 stamps .06X.12” • 5/32 *ACHAR5/32 stamps .125”X.19”, 3/16 *ACHAR3/16 stamps.156X.23 Spacer Kit I*ASPACER includes widths of: 4 each 1/16, 3/32,⅛, 2 pcs 3/16
Lengths: CE & Amada Standard Character Length=.875” WT=.750” (WT old style length=.572” Insert) Note: Units to hold other than .875” character lengths, example .75” or .572” have a $45-$95 adder.
FORM DOWN Keyed 4 plc.
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 29 n
COLE ENGINEERED If facilities aren’t available to properly care for your tooling, CE offers it’s
customers a tool sharpening service at low rates and 1-2 day turn around
FORM TOOL MAINTENANCE Assure best performance. Return to CE for Refurbishment sharpen, re-set, and test. We can usually turn
around a Form Tool in two to three work days. We have a minimal charge to cover labor. Our goal of this service is to assure long term satisfaction with C.E. Tooling products.
ENSURE YOUR TOOLS ARE SHARPENED PROPERLY
Have CE remove old Ejector, and add new, Add below cost per ejector hole. 2mm/.078” or 3mm/.109” holes +$2.50 6mm/.236” or 1/4=.25” + $3.5 10mm/.394” or 15mm/.590” + $4.00
Spherical
Add $5.00 To Punch
Spherical
*ASPS Roof Top
*ARTS
Inverted
*AIS
Concave
*ACS
Double Inverted
*ADIS
Whisper (1-Way)
*AWS
DIE SHARPENING COSTS Qty 1-3
Qty 4-10
Qty 11-25
O.D. UP TO 2-1/4” DIAMETER O.D. OVER 2-1/4 TO 6-1/2” O.D. > 6” - 11” Diameter
PUNCH Sharpening Cost FLAT (NO SHEAR)
Qty 1-3
Qty 4-10
Qty 11-25
Max. diagonal Up to2-/4” TIP DIAGONAL 2-1/4 TO 5” TIP DIAGONAL 5” TO 8”
SPECIAL SHAPED TOOLS SHIP IN 1-5 WORK DAYS Standard Delivery is 3-5 work days. Expedite Guarantee 3 days, +10%, 2 days +30%, 1 day, +50%
NOTE: Ar, Br, Cr, means a radius value is requested. Further, a .015” Radius is always recommended on corners less than 90 degrees.
ADIA.
SP-1 SINGLE "D" SP-2STD SHAPE PRICE
SP-3 HEXAGON
A
STD SHAPEPRICE
SP-7 SP-8
SP-9 SP-10
SP-4
SP-16SP-15SP-14SP-13
KEYWAY (1)
KEYWAY (2) KEYHOLE (1) KEYHOLE (2) KEYHOLE (4)
ADIA. A
A
DIA.
DIA.
C
BC
CB
CB
OCTAGON SP-5 SP-6
SP-12SP-11 SP-17
SP-18
KEYWAY (4)
TEARDROP
A
A
r1r2
A
Br1
r22X
2X
B
A
r1
r2
r3
r4
D
Cr
E Ar
B
SP-19 SP-25SP-20 SP-21
SP-27
SP-26
C
Ar
B
C
B
Ar
ADIA.
B
C
A
B
A
B
Dr
AG
B
D
FrErC CC
SP-31
SP-37 SP-38 SP-39 SP-40
SP-34SP-33SP-32SP-28
SP-22 SP-23 SP-24
SP-30SP-29 SP-35
SP-36 SP-41 SP-42
SP-48SP-47SP-46SP-45
SP-44SP-43
A
B
C
A
BC
A
B
D
C
A
B
DC
A B
D
C
B
A
C
D
A B
B
AC
r1r2
A
C
TO APEX
TO APEX
B
RECOMMEND.015 RAD ON ALLCORNERS
C
Ar
Br
Ar
Br
C
C
B
r
ADIA.
A DIA.
B
C
C
A
B
D
A
CB
D
A
B C
D
Er
FrEr
Er
A
B
D
A
B
DB TYP
A TYPC
C
45DEG
A
C
r
A
B
C
D
r
A
BC
D
r1
r2
A
C
B
D
A
B
C
AB
C
D E F
A
Br1r2
A
B
Cr
A
B
C
D
r WEB THICKNESS
RADIUS6 BLEEDOPTIONAL
ABr1
r2
AB
D
C
r1r2
B
A
C
SP-50 SP-51 SP-53 SP-54SP-49
B
A
90 B
A
90
B r1
AR1
R2
R3
60
45
75
NOTE:
For use in Auto Index.
A B
30, 60, 90 Degree STD SHAPEPRICE
A A
A A A A
A A A A A A A A
B B
B B B B C C C B C
C B B
B
DCBBBBB B B
B D D BB B B
B D
C
C
For use in Auto Index.
SP-8 KEYWAY (1)
ADIA.
C
B B
B
CL CL
B
Bow Tie
Section-3 Page 30 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
CE Tooling LOUVER TOOLS FOR BRAKE PRESS Single, Double Triple, .. .
EUROPEAN Adapters for AMERICAN
STYLE TOOLS 1/4-20 x 1-1/2SHCS
1/4-20 SHCS
4.0REF1.4173
WILLA or
TRUMP UPPER
EUROPEAN Upper
1/4-20 x 1-1/2SHCS
1/4-20 X 1SHCS
AMERICAN
UPPER
"A"
"B"
"C" HEIGHTLENGTH
WIDTH
(6.35mm MAX)
"A"
"E"
"C"
"D""B"
Stocked Sizes American Style FORM DOWN
A=Length 2” 3” 4” 5” 6” 8” B=Width 1/2” 5/8” 3/4” C=Height 3/16 1/4” 5/16
D=Spacing 3/4” 7/8 E=Base 2-1/2 3-1/2 4-1/2 5-1/2 6-1/2 8-3/4 List Price 1375.00 1391.00 1418.00 1445.00 1552.00 1793.00
1-1/8
Additional In Row
Pricing Subject to Change With Out Notice Mar-09 Section-3 Page 31 n
COLE ENGINEERED
COLE ENGINEERED
In our ever increasing goal of providing tools and parts for all your fabricating needs, CE Tooling is happy to announce that we can now provide you with perishables for
your LASER Cutting Machine! Call , Fax or E-Mail us today for a quote on the parts you require. Just provide us with your machine make, model & serial number.
MAKE 2006 YOUR YEAR TO SAVE $$$ & INCREASE PROFITS WITH CE TOOLING!
$AVE ON LASER PERISHABLES
NCT3 Turret Automated Tapping
2"" Sta. C: Smaller threads M1.6-M5 or #2- #12 Tapping Unit Complete with one thread size
Pitch Insert (mated to tap pitch size) Taps: 10pc Pack for most common sizes $113.- $145.
Replacement: Soft Nose Piece, Prolong Grease, Prolong Oil, PT-Vanishing Oil 1ga., 5 gal, PT-Extreme Oil 1 gal., 5
gal, 1Quart Sprayer, Storage Case, Pitch Puller & Retaining Ring Pack for Pitch Inserts can be purchased separately.
3-1/2" Sta. D: Larger threads M6-M8 or #12-5/16 Tapping Unit Complete with one thread size
Pitch Insert (mated to tap pitch size. Taps: 10pc Pack for most common sizes $146. - $300.
Replacement Soft Nose Piece, Prolong Grease, Prolong Oil, PT-Vanishing Oil 1 gal, 5 gal, PT-Extreme Oil 1 gal, 5 gal, 1 Quart Sprayer, Storage Case, Pitch Puller & Retain-ing Ring Pack for Pitch Inserts can be purchased separtely.
Reduce your cost per hole to below $.01 each Tap up to 180 holes a minute. (Depending on ram speed) Pitch insert change in minutes. Roll form taps. No minimum distance between tapped holes Pre-Pierce Hole is required prior to tapping. Tapping tool and Oil Tank is loaded into turret. The “ready punch height will need to be cali-brated prior to tapping and the clamp safety zone will need to be set. Oil Housing rests on the backside of the turret and is held in place by two magnets. The tapping unit and oil housing are connected together by supplied hoses. (With Finnpower machines, the tank surrounds the B sta. Yet still allows the station to be used. Max. Material Thickness is determined by Pitch. Speed is up to 200 SPM on 1” Centers. Tapping Tool consists of Tapping Motor, Oil Tank (mounts outside station on turret), Die Anvil, Lubrication Kit for Maintenance, & (1) Pitch Insert (interchangeable)
Section-3 Page 32 n Mar-09 Pricing Subject to Change With Out Notice
COLE ENGINEERED
Die-Set, Brake Press, Iron Worker, Shears, C-Frame, Tube&Pipe Specializing in tooling and machine parts for:
Amada, Behrens, Boschert, Chassis Maker, Di-Acro®, Ehrt, Euromach, Finnpower, Haco, Murata Wiedemann,
Nisshinbo, Omes, Pullmax, Rainer, Roper Whitney, Salvagnini, Simasv, Strippit®, Trumpf, Raskin, W.A. Whitney
and similar presses
LOCAL SALES REPRESENTATIVE DISTRIBUTORS
sales@cetooling.com www.cetooling.com Tel. 702 736-2598 Fax 702 736-3038
CE TOOLING, INC. 2560 W. Brooks Ave.
N. Las Vegas NV 89032
BRAKE
top related