mv voltage detector
Post on 27-Jun-2015
245 Views
Preview:
DESCRIPTION
TRANSCRIPT
MV Voltage Detector VECTOR
MV Voltage Detector VECTOR
Lateral additional
indications
MV Voltage Detector VECTOR
Lateral windows for indication duplication
And protection of built-in multi-sensor
Designed to cross spy hole more easily
Replaceable pole adapters
Harder shell for better shock resistance
Go / No go indications
Integral self test
MV Voltage Detector VECTOC
Outdoor Indoor Bridging test conditions from 3kV to 36kV IEC 61243-1 2009 New Housing dimension:
- Diameter Ø 58mm - Length 430mm
Voltage range covered : 3 to 36KV with a maximum ratio of 3.6 between the min. and the max. voltage. E.g. : 10/36KV.
Frequency : 50Hz and 60HZ Indication of the presence of the nominal voltage by red
LEDS and an audible signal
■ Spécifications of the MV Voltage Detector
MV Voltage Detector VECTOC
■ Specifications of the MV Voltage Detector
All our detectors are individually set in the factory to real voltage. Self-test device checking all the circuit, initial settings and the battery During use, they constantly check the initial setting thanks to their internal calculator. Indication of correct operation by a green LED that need to be seen to confirm the
absence of voltage. Power supply : 9V alkaline battery. Electronic cut-out if battery drops under safety
threshold.
Very sturdy polycarbonate casing available in white, yellow and bleu Temperature range : from -25°C to +55°C (class N). Can be used in all weathers. Weight/Dimensions : Weight : 0.380 kg Length : 188mm – Ø : 49mm Device supplied in a metal case or soft carrying case (according to model)
MV Voltage Detector VECTOR
Permanent standby Automatic wake up
Self test with test button Self test running all along the test duration Self test checking sensitivity parameters and all
functions
■ Functions of the MV Voltage Detector
MV Voltage Detector VECTOR
Easy Battery replacement Direct access Battery secured in place by the housing PCB guiding slots Full electronic shielding
■ Standard and Environment
All our products help utilities to face global challenges providing high safety level for electrical network improvement operations:Preparation / safetyEfficiency / Availability
THE NETWORK WILL CHANGE !
THE NETWORK WILL CHANGE !
THE NETWORK WILL CHANGE !
Work in total confidence
with your powernetwork
HISTORY & FIGURES
1949: creation of the company to supply earthing devices to “compagnie du Rhin”
1960: creation of the French LiveW competence Center (SERECT) in Mulhouse
1989: building of this building specialy designed around high voltage laboratory
1998: integration in Novarc Group 4800 m², 3500 references, TOP80% 1500 ref / 40 products 330 suppliers, 2M components, 200k end products ISO 9002 in 1996, ISO 9001 since 2002 Export rate > 65% in more than 100 countries
sales@alburaqtools.ae
top related