mte technology, inc. - microtech asiamicrotech-asia.com/downloads/ppt/mte-companyprofile.pdfmitutoyo...

Here comes your footer Page 2

MTE TECHNOLOGY, INC.

• Established 1987 by MR. CLEMENT CHAN

• Approximately 250 employees at 3 sites in 3 countries.

• ISO 9001:2008 & ISO 14001:2004 Certified

• MTE Technonology Inc. Phils. overseen & managed by MR.CHARLES JAYARAJ

The company is a duly registered domestic corporation situated at Lot C2-10, Carmelray Industrial Park II, Brgy.

Punta, Calamba City, Laguna it is a subsidiary of Microtech Engineering Pte Ltd. In Singapore since it’s establishment

in the Philippines way back in 1999.

Our customers are mostly from the Multi-National Companies on Electronic, Automotive and Semiconductor Industry.

In which we are listed as a preferable contractor. In order to provide the quality precision products & Services to our

customers, we strive hard to upgrade and invest on our facility to ensure the quality of our products & services that

meets our customers requirements and expectations at all times.

_______________________ ____________________

CHARLES JAYARAJ CLEMENT CHAN General Manager President

Introduction

Here comes your footer Page 3

QUALITY POLICY

M anufacturing T owards E xcellence

Committed to Quality and Environmental Management System in achieving COSTUMER SATISFACTION &

ENVIRONMENTAL FRIENDLY FACILITY by:

• Meeting customers’ requirements;

• Complying with all legal and other requirements;

• Controlling the significant environmental aspects and impacts of our direct & indirect process;

• Conservation of resources; and

• Continually improve on the effectiveness of the quality & Environmental Management System

through relevant trainings of employees and associates

Here comes your footer Page 4

Introduction

SERVICES OFFERED

FABRICATION • Conventional Lathe & Milling

• Wire Cut, EDM, Super Drill

• CNC Machining or Milling Center

• Precision Grinding

• Finishing/Assembly

METAL STAMPING • CNC Turret

• Press Machining

• Sheet Metal Bending

• Tig Welding (SUS, Aluminum & Steel)

• Finishing/Assembly

CUTTING / MASS PRO. • Precision Lathe & CNC Turning

AUTOMATION • Machine Assembly

• Machine & Process Improvement

Here comes your footer Page 5

Introduction

Our BUSINESS PARTNERS

Here comes your footer Page 6

Sample Projects

FABRICATION & ASSEMBLY

MC501 CDR6

SUS304

MISUMI LINEAR BUSHING

• LOAD & UNLOAD JIG

Size (mm) : 75 x 98 x 118

ALT6

With EN Plating

• WAFER CASSETTE

Size (mm) : 275 x 290 x 330

Here comes your footer Page 7

Sample Projects

FABRICATION & ASSEMBLY

MISUMI

LINEAR GUIDE

• CHECKING JIG

Size (mm) : 30 x 150 x 190

• SLIDER FAB JIG

Size (mm) : 12 x 85 x 180

SUS420J2

SUS304

SUS304

AL5058

SUS420J2 HRC50~55

SUS420J2 HRC50~55

SUS304

M1.6 x P.35 INTERNAL THREAD

88 Holes

Here comes your footer Page 8

Sample Projects

FABRICATION & ASSEMBLY

• VACUUM JIG

Size (mm) : 40 x 76 x 195

• WAFER FAB JIG

Size (mm) : 22 x 158 x 158

1/8 x 8 PNEUMATIC FITTINGS

SUS420J2 HRC50~55

SUS420J2 HRC50~55

SUS304

MISUMI

MAGNETS

LOAD POSITION

UNLOAD POSITION

Here comes your footer Page 9

Sample Projects

FABRICATION & ASSEMBLY

• WAFER FAB JIG

Size (mm) : 100 x 150 x 220

• VACUUM JIG (for PCB ASSEMBLY)

Size (mm) : 45 x 250 x 300

AL5052

With EN Plating

SUS420J2 HRC50~55

BRASS

SUS304 PNEUMATIC FIITING

AL5052 SUS303

Here comes your footer Page 10

Sample Projects

FIXTURE ASSEMBLIES

• PRODUCTION WORK TABLE

Size (mm) : 450 x 525 x 1850

• PRODUCTION WORK TABLE

(Perforated Type)

Size (mm) : 750 x 100 x 800

ALUMINUM STANDARD FRAME

SUS303

SUS304

SQUARE TUBE SUS303

ROD

SUS304 MIRROR

PERFORATED PLATE

Here comes your footer Page 11

Sample Projects

FIXTURE ASSEMBLIES

• MACHINE PROTECTIVE COVER

Size (mm) : 790 x 890 x 945

ALUMINUM STANDARD FRAME

SUS304

ENGINEERING PLASTIC

• GUARDED SCRAP BIN

Size (mm) : 385 x 410 x 568

ANTI-STATIC CASTER WHEEL

SUS304 BEND PLATE

MIRROR

STAINLESS

SUS304

MIRROR

ANTI-STATIC

ACRYLIC

Here comes your footer Page 12

Sample Projects

FIXTURE ASSEMBLIES

• WASHING BASKETS

Size (mm) : 200 x 305 x 330 Size (mm) : 138 x 375 x 375

SUS303 ROD

ELECTRO POLISHED

SUS MESH WIRE FENCE SUS303 ROD

ELECTRO POLISHED

PEEK (Beige)

SUS303

ELECTRO POLISHED

Here comes your footer Page 13

Sample Projects

FABRICATION - Others

CDM

AL5052 / T6

SUS303 / 304

• PALLETS • PRECISION PARTS Mold & Dies

CARBIDE

SUS440C w/ HRC

SKS3 w/ HRC

SUS440C w/ HRC

Criticality: +/- 0.002mm or -0.002mm

Treatment: HRC, DFC , & others

AL5052 w/ EN Plating

SUS440C HRC50~55

BRASS

ULTEM

• CONSUMABLE PARTS

Here comes your footer Page 14

Sample Projects

METAL STAMPED PARTS

AL5052 / T6

ALUMINUM t= 1.50mm SECC t= 2.00mm

SECC t= 1.60mm

MILD STEEL t= 2.0mm w/ BLACKENING

MILD STEEL t= 1.50mm

SUS304 t=1.00

SUS304 t=0.50

Process Material Thickness

BENDING SUS, MS, SECC, AL 3mm, 3mm, 3mm, 5mm max.

TURRET SUS, MS, SECC, AL subjective

PRESS SUS, MS, SECC, AL subjective

Here comes your footer Page 15

Sample Projects

CUTTING / CNC TURNED PARTS

AL5052 / T6

PEEK Ø 4.00mm

(and other Engineering Plastics)

COPPER Ø 6.00mm

ALUMINUM Ø 10.00mm

SUS303 Ø3.00mm SUS303 Ø1.50mm

SUS416 Ø4.00mm

Diameter Size Available: Ø1.20 ~ Ø12.00mm

HRC & Special Coating/Finishing consideration

Here comes your footer Page 16

Sample Projects

AUTOMATION

AL5052 / T6

• MACHINE & PROCESS IMPROVEMENT From manual to automatic loading & unloading process.

CONTROL SYSTEM

Electro-Pneumatic Controls

LOAD & UNLOAD FIXTURE

SUS & Aluminum Material

Actual Set-up of Fixture

• MACHINE ASSEMBLY

CTL PANEL

CTL SYSTEM

OPTICAL 3D PROFILING MACHINE

PLASMA WELDING MACHINE

Here comes your footer Page 17

CAPABILITY:

CNC Milling Machine Center - 12 units

Horizontal Milling Machine - 2 units

CNC Lathe - 18 units

CNC Tap & Drill Machine Centre - 3 units

Conventional Vertical Milling Machine - 11 units

Conventional Lathe Machine - 4 units

Surface Grinding Machine - 9 units

Centerless Grinding Machine - 1 unit

Bench Grinder - 5 units

Bench Drill - 3 units

CNC Wire Cut Machine - 3 units

EDM Machine - 1 units

Shearing Machine - 2 units

Bending Machine - 4 units

Magnetic Deburring Machine - 1 unit

Deburring Machine - 1 unit

Degreasing Machine - 1 unit

CNC Auto Lathe Machining - 22 units

Horizontal Band-saw Machine - 2 units

Vertical Band-saw Machine - 1 unit

Manual Slotting Machine - 1 unit

Hydraulic Riveting Machine - 1 unit

Multi-Spindle Tapping Machine - 2 units

MACHINERIES & EQUIPMENTS

Here comes your footer Page 18

MACHINERIES & EQUIPMENTS

Fine Cut Machine - 1 unit

Universal Tool Cutter & Grinder - 1 unit

Precision Machine Tool Grinder - 1 unit

Profile Grinding Machine - 2 units

High Frequency Brazing Machine - 1 unit

Induction Hardening Furnace - 1 unit

EDM Drilling Machine (Super Drill) - 1 unit

Automatic Spot Welding Machine - 1 unit

DNT Table Spot Welding Machine - 1 unit

Tumbler Machine - 1 unit

Dipping Washing Machine - 3 units

Chemical Washing Machine - 1 unit

Lapping Machines - 1 unit

Centrifugal Finishing Machine - 1 unit

Hydraulic Stamping Press Machine 45 tons - 1 unit

Hydraulic Stamping Press Machine 60 tons - 1 units

Hydraulic Stamping Press Machine 80 tons - 1 unit

Hydraulic Stamping Press Machine 110 tons - 3 units

Hydraulic Riveting Machine - 1 unit

CNC Turret Punch - 2 units

Hydraulic Stamping Press Machine 200 tons - 2 units

Ultrasonic Washing Machine - 1 unit

Electric Lifter - 1 unit

Pork Lift - 1 unit

Tig Welding Machine - 3 units

Vacuum Pack Machine - 1 unit

CAPABILITY:

Here comes your footer Page 19

MEASURING TOOLS & EQUIPMENTS

Coordinate Measuring Machine - 2 units

Mitutoyo Digital Micrometer (25-50mm) - 1 unit

Mitutoyo Analog Blade Micrometer - 1 unit

Mitutoyo Blade Micrometer (0-25mm) - 6 units

Mitutoyo Inside Micrometer (0-25mm) - 1 unit

Mitutoyo Tube Micrometer (0-25mm) - 1 unit

Mitutoyo Vernier Micrometer (0-25mm) - 1 unit

Digital Outside Micrometer (0-25mm) - 28 units

Groove Micrometer (0-25mm) - 1 unit

Mitutoyo Dial Caliper (0-150mm) - 1 unit

Mitutoyo Dial Caliper (0-300mm) - 1 unit

Mitutoyo Digital Caliper (0-200mm) - 13 units

Mitutoyo Digital Caliper (0-300mm) - 5 units

Mitutoyo Digital Caliper (0-150mm) - 28 units

Mitutoyo Vernier Caliper (0-200mm) - 3 units

Mitutoyo Vernier Caliper (0-300mm) - 5 units

Mitutoyo Vernier Caliper (0-150mm) - 5 units

Mitutoyo Vernier Caliper (0-800mm) - 1 unit

Mitutoyo Vernier Caliper (0-1500mm) - 1 unit

Mitutoyo Digimatic Indicator (0-25.4mm) - 4 units

Mitutoyo Digimatic Indicator (0-50.8mm) - 3 units

Mitutoyo Dial Test Indicator (0.1mm) - 6 units

Mitutoyo Dial Test Indicator (0.4mm) - 1 unit

Mitutoyo Dial Test Indicator (0.5mm) - 4 units

CAPABILITY:

Here comes your footer Page 20

MEASURING TOOLS & EQUIPMENTS

Digital Height Gauge (0-600mm) - 1 unit

Digital Height Gauge (0-300mm) - 2 units

Digital Height Gauge (0-1000mm) - 1 unit

Seiwa Optical Microscope - 1 unit

Pin Gauge Set - 9 sets

Microscope with CCD Camera - 1 unit

Roundness Tester - 1 unit

Round Test Tester - 1 unit

Profile Projector - 1 unit

Gauge Block - 8 sets

Quick Vision - 1 unit

Top Bench Contour Projector - 1 unit

Rondcom Machine - 1 unit

Calibration Test Machine - 1 unit

Caliper Checker - 5 units

Wringing Jig - 5 units

Dino Lite Scope - 1 unit

Roughness Tester - 1 unit

CAPABILITY:

Here comes your footer Page 21

Contact/s:

MTE TECHNOLOGY INC.

Contact Person: Mr. Charles Jayaraj (Vice-President)

Plant & Office Address: Lot C2-10 Carmelray Industrial Park II,

Brgy. Punta, Calamba City 4027 Laguna

Philippines

Contact Numbers: +63-49-5080176, 5080328

Fax Number: +63-49-5080180

Email: charles@microtech-asia.com

MICROTECH ENGINEERING PTE LTD.

Contact Person: Mr. Clement Chan (President)

Plant & Office Address: 6 Penjuru Close Singapore 608614

Contact Numbers: +65-64421624, 64421471

Fax Number: +65-64424285

Email: clement@microtech-asia.com

Website: www.microtech-asia.com