mt2000 scanner configuration bi

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Battery Insertion

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Connect the Cradle to the Desktop Computer by using RS232

Scan the Cradle Barcode with one scanner for pairing the Scanner and Cradle

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

If the scanner Transmitting any other prefix/suffix please scan *Set Defaults or Set Factory Defaults barcode and again Scan the Cradle Barcode.

Lost Connection to HostIf scanned data does not transmit to the cradle's host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC outlet, if applicable. If scanned data still does not transmit to the host, re establish a connection with the host computer1. Disconnect the power supply from the cradle.2. Disconnect the host interface cable from the cradle.3. Wait three seconds.4. Reconnect the host interface cable to the cradle.5. Reconnect the power supply to the cradle, if the host requires.6. Reestablish pairing with the cradle by scanning the pairing bar code

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Multi Point to Point CommunicationFor connecting (Pairing) Multiple Scanners with one CradleScan the Multipoint to Point Mode bar code.

Now we can Connect 7 scanners to the same Cradle by scanning the cradle barcode with each scanner to be paired.

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Adding Prefix and Suffix to Paired ScannersPlease scan the parameter Broadcast disable barcode below.

Now we can give individual Prefix/suffix for each scanner

Select the ASCII Character Code for Prefix and suffix data you want to put to the individual Scanner and Scan the Numeric Barcodes as DesiredExample from ASCII Chart

ASCII EquivalentCharacter Value

! 1033“ 1034# 1035$ 1036% 1037& 1038( 1040) 1041* 1042+ 1043@ 1064Etc……

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

To Add a Prefix DataScan the Scan Prefix (07h) barcode below and Scan the 4 Numeric barcodes in the next page Related to the prefix and then scan the <PREFIX><DATA> (O4h) Barcode

Scan the Scan Suffix 1 (06h) barcode below and Scan the 4 Numeric barcodes in the next page Related to the prefix and then scan the <DATA> <SUFFIX1> (O1h) Barcode

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

If any problem in scanning/other barcode are during programming then scan Data format cancel barcode.Numeric Barcodes for Prefix/Suffix

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

In case of an error while scanning or to change the selected prefix/suffix, scan the cancel barcode

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

ASCII CODES

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing

Take print out from MT2000 manual for barcode

Page no:188,175,176,201,202,203,515,516,517

Note: All Barcodes in the above manual cannot be used for Scanning Purpose .Separate manual will be given For pairing