msi x320 step-by-step windows xp os installation guide2011-04… · 2. install the driver based...

MSI X320 Step-by-step Windows XP OS Installation Guide

List of Materials needed: 1. External USB CD/DVD Rom Drive w/ Windows XP OS Installation Disc

2. External USB 1.44 FDD w/ 1.44 Floppy Disc

Windows XP OS Installation Step-by-step guide: 1. Press function key ”F11” upon boot up, then you’ll be prompted with the

screen below to select the boot device. Select the external ODD device used then press “ENTER”

2. When prompted with below screen, press any key to boot from CD.

2. Press function key “F6” when prompted with below screen. Note: the instruction is located on the lower left part of the screen.

3. Then press “S” key to select “Specify Additional Device”

5. Select ”Silicom Image Sil 3531 SATALink Controller for windows XP/Server 2003” then press ”Enter” key

6. After the Silicon Image driver is successfully installed, press “ENTER” key to continue. (After this process, you can now proceed to the normal Windows XP installation procedure) Note: Please follow the steps provided with pictures.

7. Type the product key provided by Microsoft, then press”Next”

8. Now, Windows XP is successfully installed and ready for use.

Windows XP Driver Installation Procedure 1. Please download the Windows XP driver from the link provided below. http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1780

2. Install the driver based from the following sequence: Chipset VGA AUDIO …. Others which are not specified after Chipset VGA AUDIO can be installed in non-sequential manner.

Note: 1. If the system installed is Windows XP SP2 onwards, then by pressing “Fn + F6”

key will automatically install the Camera driver. 2. When installing LAN driver, RJ45 LAN cable should be plugged-in first into

X320’s RJ45 port to execute LAN.