msd system design review agenda p11212 : lve controls, rf module

MSD System Design Review AgendaP11212 : LVE Controls, RF Module

• Meeting Purpose• 1. Present an overview of the project.• 2. Confirm understanding of Customer Needs and Engineering Specifications.• 3. Review Concept Generation and Refinement process.• 4. Proposal for a design solution and analysis of benefits vs. disadvantages.• 5. Discuss Feasibility and possible alteration of plan.• Materials to be Reviewed• 1. Project Description • 2. Work Breakdown Structure • 3. Customer Needs• 4. Engineering Specifications • 5. Interface Document • 6. Concept Selection Matrix • 7. Proposed Ideas• 8. LVE Controls vs. LV 1 Gen 1 Design and RP1 Gen 2 Design • 9. Project Plan Moving Forward• 10. Risk Management

Meeting TimelineStart Time Topic of Review

12:30 Project Introduction12:40 Work Break Down structure12:45 Customer Needs12:50 Engineering Specifications

1:00 Interface Control Document1:10 Concept Generation and Selection1:20 LVE vs LV1 and RP11:35 Project Plan1:40 Risk Assessment1:50 Are we ready to design?

Work Break Down Structure

Work Break Down Assignments

• Wireless Interface – Dan• Microcontroller – Dan• Communication Bus – Gokhan• Logic Power – Nick• Motor Power – Nick• H-bridge Drivers – Gokhan• Pulse Width Modulation - Gokhan

Customer Needs

Engineering Specifications

Interface Control Document

Concept SelectionRF Module

Concept SelectionMicrocontroller

Concept SelectionMotor Control

Concept SelectionMSA Communication

System Analysis

• Delay through transmission: – Theoretical message size: 18 bits – Single Message Latency:

• Time through USART: 18b / 31kBps = 72us • Time through RF: 18b / 40kbps = 450us • Total time: 72us + 450us = 522us

– Max messages: 5 – Max messages size: 54 bits – Max Message Latency:

• Time through USART: 54b / 31kBps = 217us • Time through RF: 54b / 40kbps = 1.35ms • Total time: 217us + 1350us = 1.567ms

– Forward Backward Left Right M1 + M1 - M2 + M2 - M3 + M3 - M4 + M4 - M5 + M5 - M6 + M6 - M7 + M7 - M8 + M8 – – 5 bit: instruction 0-31 – 4 bit: speed 0-15 – X bit: redundancy – 5 instructions at once – (5+4+9)*3= 54 bits/instruction set

System Analysis

• Heat Transfer Rate:• Q = ΔT/R • ΔT = Tinteral - Texternal

• R = d/ka• d = material thickness• k = thermal conductivity• a = exposed surface area• so Q = ΔTka/d

System Architecture

Previous Architecture

Previous Architecture

Project Plan

Project Plan Gannt Chart

Risk Assessment