moulding dentil
Post on 08-Apr-2016
231 Views
Preview:
DESCRIPTION
TRANSCRIPT
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
32
DE171 3/4” X 2” Teeth 1”; Gap 3/4”
More Dentils pictured on pages 31-35.
DE168 P 1/2” x 1/2” Teeth 1/2”, Gap 1/4”
1/2”
DE169 P 3/4” x 1” Teeth 1”, Gap 3/8”
1”
DE170 P 5/8” x 1-1/2” Teeth 3/4”, Gap 3/8”
1-1/2”
BB1200 P-O-M-C 3/4” x 2” Teeth 1”, Gap 1/2”
2”
DE172 P 1/2” x 1-5/8” Teeth 1”, Gap 1/4”
1-5/8”
DE173 P 3/8” x 1” Teeth 7/8”, Gap 1/4”
1”
Dental Mould - Stock Profiles
Not to ScaleP = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar 33
LCD8097 10 1/2” Drop x 6” ProjectionFeaturing CR800, DE171 (alt BB1200), B469
LCD8032 8” Drop x 5” ProjectionFeaturing CM83, DE169, CR65
LCD8090 9” Drop x 9” ProjectionFeaturing CR882, CDS1x4, S4S1x4, CM72, DE172, PM50
CDS1x4
LCD8031 9 3/8” Drop x 8 5/8” ProjectionFeaturing CM85, CDS1x4, S4S1x4, CM89, DE170, PM569
CDS1x4
Shipped Unassembled
Foracompletelistof LCD designs
Seewww.bbwood.com
Crown/Dentil Combinations
Special Order
Not to ScaleMouldings on this page are European Beech or similar Hardwoods
1381 3/8” x 3/4” x 34-1/2”1385 1/2” x 1-1/8” x 34-1/2”8-5/8” between knuckles
Turned Bamboo
Pearls also available in : 1/4”, 3/8”, 1/2”. Full rounds in 3/16”, 1/4”, 3/8”.
Special Beading
1702 5/16” x 5/8” x 34-1/2”
Rope
1703 3/16” x 3/8” x 48”1704 3/8” x 3/4” x 48”1705 1/2” x 1” x 48”
See page 27 for 8’ lengths of Rope and more sizes.
1711 1/2” x 1” x 48”Pattern repeats 11/16”
1712 3/16” x 1” x 48”Pattern repeats 1-3/8”
1713 9/16” x 1” x 48”Pattern repeats 1-3/16”
1701 3/16” x 3/8” x 34-1/2”
Pearl Beading
1710 3/16” x 1” x 48”Pattern repeats 1-1/8”
1715 1/4” x 1-1/4” x 48”Pattern repeats 3-1/4”
1707 5/16” x 11/16” x 48”Pattern repeats 1”
1708 3/8” x 3/4” x 48”Pattern repeats 1-9/16”
1709 3/8” x 5/8” x 48”Pattern repeats 5/8”
1716 3/16” x 1-1/2” x 48”Pattern repeats 7/8”
34
Carved Dentil & PanelCabinet Moulding -
Stock Profiles
Not to ScaleMouldings on this page are European Beech or similar Hardwoods
35
1723 3/8” x 11/16” x 48”Pattern repeats 3/8”
1718 1/4” x 2” x 48”Pattern repeats 3/8”
1719 1/4” x 2” x 48”Pattern repeats 1-7/16”
1722 3/16” x 5/8” x 48”Pattern repeats 1/2”
1724 1/4” x 3” x 48”Pattern repeats 5/8”
1730 11/32” x 1” x 48”Pattern repeats 3-3/8”
1731 5/16” x 1-3/8” x 48”Pattern repeats 1/2”
1732 1/4” x 1-3/8” x 48”Pattern repeats 2-3/4”
1733 5/16” x 1-9/16” x 48”Pattern repeats 7/8”
1734 1/2” x 1-1/4” x 48”Pattern repeats 3/4”
1766 1/2” x 7/8” x 48”Pattern repeats 3/4”
Carved Dentil & PanelCabinet Moulding -
Stock Profiles
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
BB1164 P-O 5/8” x 2-1/4”
BB1163 P-O-M-C 1-1/16” x 3-1/4”
DH99 P1-1/16” X 5-1/4”
36
TC150 P 1-3/4” X 2-1/4” DH190 P 1-1/16” X 5-1/4”
TC150
DH190
DH190 & TC150 are sold separately
BB1165 P-O-M 3/4” x 3-1/4”
Embossed
Door Header & Cap - Stock Profiles
Rabbeted Stool - Stock Profiles
TC140 1” X 2-1/8” Bottom projection 1-1/16”
TC120 1” X 2-1/8” Bottom projection 1-5/8”
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
1/2”
37
BB990 P-O-M-C 5/16” x 3-7/16”
Reversible - Beaded or V-Joint
Philadelphia Fence
Can be custom quoted in any width
Bead Board - Stock Profile
BB800 P-O 1-5/16” x 5-1/2”
Mantle Mould - Stock Profile
BB8200 O-M 1-3/4” x 5-3/4”
Bar Mould - Stock Profile
BR1CS O-P 1-3/4” x 6-1/4” Cut out for 1/2” Plywood
Cut out for 3/4” Plywood
MM187 P 1-1/4” x 4-3/8”
BR12WR 1-5/16” X 4-1/4”
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
38
PVC boards are stocked in 3/4” (18’0” long) & 1” (20’0” long). Widths range from 3-1/2” to 47-1/2”. Sheets also stocked in 4’0” x 9’0” in 3/8”, 3/4” & 1”.
S4S FLEX is available and shown on page 45.
Frames Jambs Oak Sill Brickmold
Oak Threshold
BB254 P-O-M-C1/2” x 3/4”
Parting Stop
BB265P-O-M-C
3/8” x 1-3/4”
BB267P-O-M-C
3/8” x 1-3/8”
Lattice
BB235 1-3/4” x 1-3/4”BB236 1-1/2” x 1-1/2”BB237 1-1/4” x 1-1/4”BB239 3/4” x 3/4”
P-O-M-C
Squares
BB956 1/4” x 2”BB957A 1/4” x 1-3/8”BB957 1/4” x 1-3/4”BB958 1/4” x 2-1/2”BB959 1/4” x 5-1/2”
P-O-M-C
Mullions
Boards are moulded on 4-sides (some current stock is surfaced 3-sides ripped 1 edge)S4S Boards - Stock
Frames, Jambs, Sills & Brickmould - Stock
Boards are stocked in: Special Order:Red Oak Mahogany Hard Maple Douglas FirPoplar Hickory Walnut SapeleSoft Maple Ash Alder European BeechCherry White Oak Knotty Alder
Lengths (depending on specie) are from 8’ to 16’. Thicknesses include 3/4”, 1-1/16”, 1-5/16” and 1-3/4”; Widths from 1-5/8”, 2-1/2”, 3-1/2”, 5-1/2”, 7-1/4”, 9-1/4” and 11-1/4” (11-1/4” boards may be glued up in some species). All species are not stocked in all sizes. Custom sizes are available.
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
BB145P-O
3/8” x 7/16”
BB146P-O
3/8” x 11/16”
BB147P-O-M-C
1/2” x 9/16”
BB148P-O-M
1/2” x 11/16”
BB132P-O-M
5/8” x 3/4”BB144 P-O-M-C7/16” x 19/32”
BB149 P-O-M-C 13/32” x 11/32”
PM537 P1/2” x 1/2”
39
BB100 P-O-M-C11/16” x 11/16”
Cove
BB129 P-O-M-C7/16” x 11/16”
BB21 F
Shoe
BB918 P-O-M-C9/16” x 1-1/16”
Stringer
BB205P-O-M-C
1-1/8” x 1-1/8”
BB206P-O-M-C3/4” x 3/4”
OS102 P13/16” x 1 3/8”
OS101 P13/16” x 13/16”
Outside Corner
BB160 P-O-M-C9/16” x 1-3/16”
Head Mould
BB105 P-O-M-C3/4” x 3/4”
QuarterRound
BB120 P-O1/2” x 1”
BB123 P-O5/16” x 5/8”
HalfRound
BB142 P-O-M-C1/4” x 3/4”
Screen
Glass Beads/Panel Mould
1/4”BC2CS 1” x 2”
13/16”
1-1/16” x 2-1/4”BC3CS
Panel Mold
B8095 O 1/2” X 3/4”
BB204 1-1/8” X 1-1/8”
PM530 P 3/4” x 1-1/8”
PM561 P 3/4” x 3/4”
Full Round
MLD series 8’ long
MLD5824 M-C1/2” x 1”
MLD5822 M-C3/4” x 1-1/2”
MLD5820 M-C1” x 2”
PM586 P3/4” x 1-1/2”
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
Special Order
PB192 P-O3” x 5”
PB193 P-O4” x 7”
PB185 P-O4-1/2” x 8”
PB186 P-O5-1/2” x 8”
Above Blocks 9-1/4” HP-O-M-C
B238 15/16” x 2-3/8”B258 15/16” x 2-5/8”B358 1-1/8” x 3-5/8”B4 1-1/8” x 4”B538 1-1/8” x 5-3/8”
PB171 P-O3” x 5”
PB170 P-O4” x 7”
PB183 P-O4-1/2” x 8”
PB187 P-O5-1/2” x 8”
40
CB1 Allow 4” over base height. For bases up to 3/4” thick
CB2 Allow 4” over base height. For bases up to 1” thick
CB3 Allow 2-3/4” over base height.For bases up to 1-1/8” thick
CB4 Allow 2” over base height. For bases up to 1-1/8” thick
B-series base blocks can be ordered with
a circle design. Specify B#-CIR
Base/Plinth Blocks - Stock Profile
Top View
Inside Corner (IC)
Outside Corner (OC)
for use with 3/4” radius drywall
P-O
R610 (BB610, BB614) P-O R620 (BB620, BB622) P-OLBR001 P (accepts bases up to 3/4” x 8”)
Base Corner Blocks
Base Corners
Model Base Block Size HeightIC/OC-35 3½” 4”IC/OC-42 4¼” 4¾”IC/OC-55 5½” 6”
Custom Corners Standard & 3/4” Radius
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar
Special Order
for use with BB356 Casing
41
E6
E2
E-8
E1
E-SQ
ROS162 P-O 1” x 2-3/4”
ROS169 P-O 1” x 3-1/2”
ROS160 P-O 1” x 3-3/4”
ROS158 P-O 1” x 4”
ROS164 P-O 1” x 4-1/2”
ROS165 P-O 1” x 5-1/2”
ROS161 P-O 7/8” x 2-3/4”
ROS159 P-O 7/8” x 3-1/2”ROS163 P-O
7/8” x 3-3/4”
ROS166 P-O 1” x 3-3/4” x 5-3/4”ROS167 P-O
1” x 4-1/2” x 6-1/2”ROS168 P-O
1” x 5-1/2” x 7-1/2”
C538-C 1-1/8” x 5-3/8”
P-O-M-C
Corner Blocks - Stock Profile
P-O-M-C
C358-C 1-1/8” x 3-5/8”C4-C 1-1/8” x 4”
P-O-M-C
C238-C 15/16” x 2-3/8”C258-C 15/16” x 2-5/8”
P-O-M-C
P-O-M-C
For PLAIN “C” series with edge detail only.
Specify (-P). ex. C538-P
Blocks are made as shadow corners (made thicker & wider than casing). Call for quote for blocks that match casing.
R356 P-O 11/16” x 2-3/8” for use with BB371 Casing
R371 P-O 11/16” x 2-5/8”for use with BB371 Casing
R445 P-O 11/16” x 3-3/8”for use with BB445 Casing
Rainbow Corner Blocks
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale
D
C
BA
KEY 034 Resin Keystone
Available in standard and Oak Grain B=4”;
C=6-1/2”; D=8” will fit casings up to 1-1/2” x 4-1/2” to 7”
Fits casings up to 1-1/2” x 4” to 5-1/2”
A=1”; B=2”; C=4”; D=4-1/2”
A=1”; B=2-1/2”; C=4-1/2”; D=5”
A=1-3/4”; B=3”; C=5-1/2”; D=6”
Key 031 P-O
Key 032 P-O
Key 033 P-O
Fits casings up to 13/16” x 2-1/2” to 3-1/2”
Fits casings up to 13/16” x 3-1/2” to 4”
42
CRV5127 2-1/2" x 8" x 9-1/2"accepts casings up to 6-1/2" wide
Stock Urethane KeystonesK6: A=1-7/8; B=2-3/4; C=4-1/2; D=6-3/8K7: A=2-1/2; B=4; C=5-7/8; D=7-1/4K8: A=1-1/4; B=5-3/4; C=9-3/4; D=7-3/4K11: A=2-3/4; B=6-1/4; C=8-1/4; D=10-7/8K12: A=1-1/4; B=6; C=12; D=11-3/4K14: A=3; B=6; C=11-3/4; D=14
Keystones - Stock Profile
Special - MiterLESS Parts
Crown (Pinch) Blocks - for CR810 & CR800
KEY with CIRCLE
KEY with FLUTES
Crown Radius Inside Corner
Crown Radius Outside Corner
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
Not to ScaleP = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar
Crown (Pinch) Blocks - for CR810 & CR800
SCB will accept the following crowns (also can be made with these crowns for extra cost):Embossed: CM70; CM71; CM72; CM74; CM77; CM81; CM85; CM87Plain: CR810; CR820; CR864; CR866; CR872; CR881; CO707
LCB will accept the following crowns (also can be made with these crowns for extra cost):Embossed:CM73; CM75; CM76; CM80; CM82; CM83; CM84; CM86Plain: CR800; CR806; CR830; CR841; CR860; CR862; CR880, CO705
A = crown height; B = block height; C = total height; D = Projection from wall
LCB - Large Crown Blocks with CR800A B C D Face
LCB040 Inside Corner 5-1/2 6 11-1/2 4-1/2 -LCB041 Outside Corner 5-1/2 6 11-1/2 4-1/2 9LCB042 Center 5-1/2 6 11-1/2 4-1/2 9
SCB - Small Crown Blocks with CR810A B C D Face
SCB045 Inside Corner 3-3/4 4-1/4 8 3-1/4 -SCB046 Outside Corner 3-3/4 4-1/4 8 3-1/4 6-1/2SCB047 Center 3-3/4 4-1/4 8 3-1/4 6-1/2
43
Carved Crown Block
CRV5095 5-1/2" x 5-1/2" x 12-1/8"Accepts crowns 5-1/4 to 7-1/2"
CRV5099 3-1/2" x 3-1/2" x 8-1/2"Accepts crowns up to 5"
CUSTOM
Your Choice
of crown and block
size
SCB
CR810
LCB
B
A
C
D
CR800
Crown (Pinch) Blocks - for BB40, BB46, BB49
CP (center)IP (inside) OP (outside)
Current stock (not pictured) has a generic crown. A running change will make Size 3 with BB49, Size 5 with BB46 and Size 7 with BB40. Chart below reflects the new blocks that will be made.
A B C D Face Accepts up to
IP3 Inside Corner 2-7/8" 2-5/8" 5-1/2" 2-7/8"OP3 Outside Corner 2-7/8" 2-5/8" 5-1/2" 2-7/8" 5-3/4"CP3 Center Room 2-7/8" 2-5/8" 5-1/2" 2-7/8" 5-3/4"
IP5 Inside Corner 3-11/16" 4" 7-11/16" 4-1/16"OP5 Outside Corner 3-11/16" 4" 7-11/16" 4-1/16" 8-1/8"CP5 Center Room 3-11/16" 4" 7-11/16" 4-1/16" 8-1/8"
IP7 Inside Corner 5" 5-3/16" 10-3/16" 5-13/16"OP7 Outside Corner 5" 5-3/16" 10-3/16" 5-13/16" 11-5/8"CP7 Center Room 5" 5-3/16" 10-3/16" 5-13/16" 11-5/8"
3-5/8” Crown
5-1/4” Crown
7-1/4” Crown
Flexible Resin Mouldings for Curved Applications
II. Crown MouldingsA. Is face of crown convex or concave?B. Indicate radius of curved wall to face of sheet rock. Alternate: Specify width of curve (B) & depth of curve (A)C. Indicate length of Mould (sold by the foot) - Min. 5’ long; Max. 12’ per piece for most profiles
D. Specify Oak Grain or No Grain (check availability)E. Which side of crown is against wallF. Crown resin is not returnable
44
A. Indicate Length of Molding (sold by the foot) - Min. 5’ long; Max. 12’ per piece for most profilesB. Specify type of curve (Half Circle, Eyebrow, Ellipse, Gothic, Oval or Round) C. Half Circle-Specify Radius; Eyebrow (segment): Specify height & width of arch. All other designs require a template.
I. Casing - by the Lineal Foot
D. Specify Oak Grain or No Grain (all molds are not available in both grain and no-grain )E. Order wood Corner blocks. (Mitered Flex to Wood casing may not exactly match)F. Many more profiles are available than are shown on the preceding pages. See our web site for a complete list.
INSIDERADIUS
OVAL
PAPER or CARD BOARD TEMPLATE NEEDEDLength = Measure Template
WIDTH
(SEGMENT)
B
A
Interior or Exterior Applications
FLEX is a high density polyurethane resin with a cellular composition structure similar to wood and may be handled the same as wood. FLEX is made in two formulations. Original FLEX is priced in our catalog. ZFlex is an upgrade which is stronger, more durable and offers greater flexibility. Pricing is by quote. Either may be used in interior or exterior applications. FLEX is pre-primed for superior paint and stain adhesion. Many of the profiles are available in long lineal footage. Small, non-radius profiles up to 2” wide can be ordered up to 100’ lengths. Profiles up to 3-1/2” wide are available up to 75’ lengths. Profiles not available in long lineal are mostly available in 12’ lengths with some exceptions. FLEX has an excellent memory. After laying on a flat surface for a short pe-riod of time, depending on temperature, it will return to the shape in which it was originally molded, allowing for ease of installation.
III. Baseboards, Shoe, Chair Rails & DentilA. If resin baseboards, chair rails or dentils are being used as a base or below crown moulding on a wall, then they do not need to be precast to any radius. They are sold as “straights” and only lineal footage is needed.
B. Indicate length (sold by the foot) - Min. 5’ long; C. Specify Oak Grain or No Grain (check for availability)
STOCK LIST BB610 & BB620 No Grain BB105* & BB100* No Grain BB129* No Grain & Oak BB299 No Grain BB907 No Grain *these profiles are not an exact match to our wood profiles
Finishing Flex Mouldings
Flexible Resin Mouldings for Curved Applications
45
Finishing Flex MouldingsTo Paint Wipe surface clean with paint thinner or mild solvent. Sand lightly. If using filler use hard plastic resin filler and sand. Do not paint before installation. All paints work well. To Stain
Stain-Grade is the same composition as the smooth paint grade. The wood grain pattern allows FLEX to be finished to match wood mouldings in various hardwoods. Gelled stains or those with heavy pigments work best. Some traditional wood stains will not provide a quality job. We strongly recommend that first-time users practice on a piece of scrap FLEX before applying a finished coat. 1. Clean surface prior to staining2. Fill nail holes prior to staining with resin filler.3. Wipe on stain and remove excess with cloth and dry brush color light or dark.4. Clear coat over stain using spray application only.5. Do not brush or sand between coats.6. Achieving light natural wood colors may require stain tinting and glazing techniques.
V. Backbands A. Indicate diameter or radius of main casing and type of curve.B. Indicate length of Mould (sold by the foot) - Min. 5’ long; Max. 12’ per piece for most profilesC. Specify Oak Grain or No Grain (check for availability)
IV. S4S
S4S - may be used in curved jamb, baseboard or chair rail applications. For radius S4S see bbwood.com for sizes.No Grain is available up to 2” thick (minimum 3/8”), 12” wide (mini-mum 1/2” wide) and 12’0” long. Order widths and thicknesses in 1/16” increments. Please call for a quote for Oak grain sizes that are not listed below. STOCK SIZES S4S:
3/4 X 2 (no grain & oak grain)3/4 X 4 (no grain & oak grain)3/4 X 4½ (no grain only)3/4 X 5¼ (no grain & oak grain)3/4 X 6-9/16 (no grain only)
A. Specify Thickness,Width, Length (min 5’)
Order widths and thicknesses in 1/4” increments. Thickness other than 1/4” increments can be quoted for an additional milling charge. Special Order. Machinable Blanks - may be run through your moulder. No Grain only: Available up to 2” thick (min 1/2”), 12” wide (min 2” wide) and 5’ to 12’0” long. Call for quotation.
CONVEXViewed on a flat surface
CONCAVEViewed on a flat surface
All flexible mouldings are sensitive to tem-perature. At temperatures below 70 degrees, the mould-ing will become more rigid. At temperatures above one hundred degrees, the material will soften and tear more easily than normal. Once installed, the product will not be affected by extreme temperatures. Extra care is advisable when installing at very high or low tempera-tures. Flex Mouldings can be nailed without pre-drill-ing.It is necessary to use a quality construction adhesive before nailing. Run a continuous line of adhesive when applying. When parts are received at the job site they should be removed from the carton, bent backwards and put in the sun, heated room or oven. FLEX parts have an excellent memory. After thirty to forty-five minutes the part will return to the shape it was originally formed and be easier to install. When flattened, base and case mouldings are easy to identify. Crown mouldings have proven to be confusing for the first time user. Below you will find a drawing showing how to tell concave from convex pre-formed crown mouldings. Concave pre-formed crown mouldings appear to be formed upside down. Upon installation you will discover they are made correctly and will fit properly. • Using adhesive, mastic or resin epoxy glue alone pro-duces best fastening results• The best fastening way is to nail through a block of wood placed over face of moulding and remove nail and block after adhesive cures• Surface protrusion defects can occur if nails are paced too close to edges.• Surface depression defects can occur if nails are not deep enough or at least 1/3 of material thickness depth.• Glue joints with any fast cure resin or epoxy glue• Do not use wood glue• Repair cracks or breaks with epoxy glue
Installation Instructions
For a convex application the detail going against the wall will be on the bottom of the arch, when viewed as illustrated below.
For a concave application the detail will be on the top of the arch, when viewed as illustrated below.
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
Not to Scale
Urethane Mouldings - Interior or Exterior: Stock
MLD207-16 1” x 5-1/4” x 16’0”
MLD220-12 1-3/4” x 5-1/2” x 12’0”
MLD224-12 1-1/2” x 5-1/2” x 12’0”
MLD226-16 1-1/2” x 5-1/2” x 16’0”
MLD231-12 1” x 1-3/4” x 12’0”
MLD246-16 3-3/8” x 9-1/8” X 16’0”
MLD208-16 1” x 7-1/4” x 16’0”
Urethane mouldings have an exterior grade white primer paint with a built-in ultraviolet stabilizer. May be painted with any good quality latex or oil base paint. One coat is typically all that is needed.
Cut and trim with typical woodworking tools. Install similar to any premium wood trim with these exceptions. To minimize expansion/contraction cut moulding 1/4” longer for each 10’ of length. Use butt joints on seams and miter joints at the corners. Do not store in extreme heat. Acclimate before installation (at least 10 hours)
Use a top quality, urethane construction adhesive such as PL Premium Adhesive for installation. Use on all joints (covering the joints completely) and along the back of the moulding. Use corrosion-resistant mechanical fasteners (nails or screws) and fasten every 16” or less for exterior applica-tions. Countersink fasteners about 1/8” and fill with exterior grade white spackle. Finish Exterior installations using a quality exterior grade silicone caulk to prevent water infiltrations behind siding, windows and doors. J-channel and/or flashing may be required to prevent water infiltration. Installers must determine which installation technique is best for their situation. Wood or automotive filler can be used to fill dents or gashes. Check local building codes for altered installation procedures.
MLD247-16 1-3/8 x 8-11/16” X 16’0”
MLD215-121-3/4” x 3-1/2”
MLD227-161-1/2” x 9”
46
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
Not to Scale
MLD331-16 1-5/8” x 9-1/2” X 16’0”
2-1/4” Tooth & Space
MLD333-12 1-3/16” x 11-1/2” X 12’0”
2-3/4” Tooth & Space
MLD355-8 5/8” x 2-1/2” x 8’0”
1-3/8” Tooth; 3/4” Space
MLD350-8 7/8” x 3-1/2” x 8’0”
2-3/16” Tooth; 1-1/2” Space
MLD351-8 1-1/4” x 3-1/4” x 8’0”
3-1/2” Tooth & Space
MLD335-12 3-3/8” x 6-1/8” x 12’0”
3-11/16” Tooth; 3-9/16” Space
MLD303-5 5/8” x 1-1/4” x 5’0”
3/4” Tooth & Space
MLD310-16 1-1/4” x 4-1/2” x 16’0”
1-1/2” Tooth & Space
MLD313-8 2-1/4” x 2-3/8” x 8’0”
1” Tooth & Space
MLD320-16 1-5/8” x 5-3/4” x 16’1”
2-1/4” Tooth & Space
MLD330-12 1-5/8” x 7” x 12’0”
2” Tooth & Space
MLD304-8 5/8” x 1-1/4” x 8’0”
1-1/4” Tooth & Space
47
MLD332-81-5/8” x 5”
MLD336-163-1/8” x 9-3/8”
Pitched Dentil MLD310 in 9/12, 10/12,
12/12; MLD320 in 10/12; MLD330 in 10/12;
MLD351 in 10/12, 12/12
Urethane Mouldings - Interior or Exterior: Stock
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
Not to Scale
MLD542-16 2-3/4” x 5-1/2” x 16’0”
MLD527-16 3-1/2” x 7-1/2” x 16’0”
MLD460-12 4-3/8” x 5-1/8” x 12’0”
MLD456-16 3” x 4-7/16” x 16’0”
MLD454-12 3-25/32” x 3-15/16” x 12’0”
MLD453-16 4-11/16” x 6-11/16” x 16’0”
MLD452-12 2” x 3” X 12’0”
MLD410-12 3-3/4” x 6-7/8” X 12’0”
1-1/2” Tooth & Space
MLD406-16 3-3/8” x 4” x 16’0”
3/4” Tooth; 1-1/4” Space
MLD404-16 2-1/2” x 3-3/4” x 16’0”
3/4” Tooth & Space
MLD253-162-3/8” x 7-5/8”
48
MLD561-121-1/2” x 3-1/4”
Urethane Mouldings - Interior or Exterior: Stock
Special Order
Profiles below are a few of our
non-stock designs. See
www.bbwood.com for a complete list.
Not to Scale
MLD626-8 1-1/32” x 1-3/16” X 8’0”
MLD618-16 15/16” x 1-9/16” X 16’0”
MLD612-12 3/4” x 1-3/8” x 12’0”
MLD611-12 1-1/8” x 2-1/4” x 12’0”
MLD648-16 1-1/2” x 1-1/16” x 16’0”
MLD570-12 5-1/2” x 6-7/8” X 12’0”
MLD552-12 2-1/8” x 3-7/16” X 12’0”
MLD610-8 1-1/2” x 2-3/8” x 8’0”
MLD602-8 13/16” x 13/16” x 8’0”
MLD603-8 1/2” x 1/2” x 8’0”
49
MLD230-163/4” x 3-1/4”
MLD244-121-5/16” x 5-5/8”
MLD250-8,121-3/4” x 4-1/2”
Urethane Mouldings - Interior or Exterior: Stock
NUMERICAL INDEX
50
Item Page
1381 34
1385 34
1701 34
1702 34
1703 34
1704 34
1705 27
1705 34
1707 34
1708 34
1709 34
1710 34
1711 34
1712 34
1713 34
1715 34
1716 34
1718 35
1719 35
1722 35
1723 35
1724 35
1730 35
1731 35
1732 35
1733 35
1734 35
1766 35
B15CS 11
B17CS 11
B238 40
B258 40
B358 40
B4 40
B400 11
B401 12
B435 10
B442 12
B462 12
B464 12
B468 11
B4CS 12
B538 40
B7CS 11
BA42 13
BA43-C 13
BA44 13
BA46 13
BA47 13
BB15 9
BB16 9
BB17 9
Item Page
BB18 9
BB21 39
BB40 20
BB45 17
BB46 18
BB49 16
BB54 16
BB75 16
BB95 39
BB100 39
BB102 4
BB105 39
BB120 39
BB123 39
BB129 39
BB132 39
BB142 39
BB144 39
BB145 39
BB146 39
BB147 39
BB148 39
BB149 39
BB150 27
BB152 27
BB153 9
BB154 27
BB155 9
BB156 27
BB160 39
BB204 39
BB205 39
BB206 39
BB219 26
BB220 10
BB235 38
BB236 38
BB237 38
BB239 38
BB254 38
BB265 38
BB267 38
BB278 9
BB280 9
BB282 9
BB283 9
BB297 14
BB299 14
BB300 14
BB312 10
BB324 4
BB340 4
Item Page
BB350 14
BB356 4
BB361 4
BB371 4
BB400 8
BB400 15
BB412 8
BB445 4
BB448 4
BB450 7
BB460 4
BB471 4
BB472 4
BB475 7
BB480 5
BB490 5
BB500 7
BB575 7
BB610 11
BB614 10
BB620 10
BB622 10
BB640 11
BB645 12
BB664 10
BB675 11
BB685 4
BB695 11
BB700 11
BB714 10
BB750 5
BB750 11
BB753 5
BB753 10
BB775 12
BB800 37
BB886 8
BB907 8
BB918 39
BB956 38
BB957 38
BB957A 38
BB958 38
BB959 38
BB990 37
BB1163 36
BB1164 36
BB1165 36
BB1200 32
BB7613 12
BB7615 12
BB8109 9
Item Page
BB8110 9
BB8111 9
BB8120 9
BB8122 9
BB8200 37
BC2CS 39
BC3CS 39
BOARD 38
BR1CS 37
C238-C 41
C258-C 41
C358-C 41
C4-C 41
C538-C 41
CA30 6
CA31 6
CA33 6
CA36 6
CA37 6
CA38 6
CA39 6
CA40 6
CA41 6
CA300 4
CA302 5
CA323 7
CA325 7
CA326 7
CA327 7
CA328 8
CA329 8
CA335 4
CA342 5
CA344 5
CA360 5
CA363 5
CA368 5
CA380 5
CA388 5
CA8320 6
CA8322 6
CA8338 6
CB1 40
CB2 40
CB3 40
CB4 40
CDS1X4 33
CH5CS 15
CH610 14
CH640 14
CH650 14
CH659 14
Item Page
CH690 14
CH693 15
CH7CS 15
CH8CS 15
CM69 17
CM70 17
CM71 17
CM72 17
CM73 19
CM74 17
CM75 19
CM76 19
CM77 17
CM80 19
CM81 17
CM82 19
CM83 19
CM84 19
CM85 17
CM86 19
CM87 19
CM88 17
CM89 17
CM90 19
CM91 17
CM8801 21
CM8808 21
CM8810 21
CM8812 21
CM8820 21
CM8823 21
CM8825 21
CM8830 21
CM8834 21
CM8837 21
CM8840 21
CM8850 21
CM8852 21
CM8854 21
CM8856 21
CM8857 21
CM8858 21
CM8859 21
CM8860 21
CO705 18
CO707 16
CO730 16
CP-3 43
CP-5 43
CP-7 43
CR61 15
CR63-A 15
Item Page
CR64 15
CR65 15
CR66 15
CR67 14
CR68 9
CR69 14
CR800 20
CR810 17
CR820 16
CR830 18
CR840 16
CR841 20
CR850 16
CR860 20
CR862 19
CR864 19
CR866 17
CR872 16
CR880 18
CRV5095 43
CRV5099 43
CRV5127 42
CSCR59 20
DE168 32
DE169 32
DE170 32
DE171 32
DE172 32
DE173 32
DH190 36
DH99 36
DS110 8
DS111 8
E1 41
E2 41
E6 41
E8 41
E-SQ 41
FR8920 23
FR8921 23
FR8922 23
FR8923 23
FR8940 23
FR8950 23
FR8953 23
FR8954 23
FR8955 23
FR8956 23
FR8957 23
FR8960 23
FR8965 23
FR8967 23
51
FR8968 23
FR8970 23
FR8971 23
HABA062 12
HABA066 12
HABA218 12
HABA264 12
HABA304 12
HACA052 4
HACA082 4
HACA091 5
HACA101 11
HACA115 7
HACA134 5
HACA221 4
HACA288 5
HACA305 7
HACA346 4
HAMA165 26
IC/OC-35 40
IC/OC-42 40
IC/OC-55 40
IP-3 43
IP-5 43
IP-7 43
K11 42
K12 42
K14 42
K6 42
K7 42
K8 42
KEY 031 42
KEY 032 42
KEY 033 42
KEY 034 42
LBR001 40
LCB040 43
LCB041 43
LCB042 43
LCD8031 33
LCD8032 33
LCD8097 33
LCD8090 33
LM90 24
LM91 24
LM92 24
LM93 24
M312 5
M313 7
M3TB 4
MA20 4
MA30 5
MD4316 17
Item Page
MLD207-16 46
MLD208-16 46
MLD215-12 46
MLD220-12 46
MLD224-12 46
MLD226-16 46
MLD227-16 46
MLD230-16 49
MLD231-12 46
MLD244-12 49
MLD246-16 46
MLD247-16 46
MLD250-8,12 49
MLD253-16 48
MLD303-5 47
MLD304-8 47
MLD310-16 47
MLD313-8 47
MLD320-16 47
MLD330-12 47
MLD331-16 47
MLD332-8 47
MLD333-12 47
MLD335-12 47
MLD336-16 47
MLD350-8 47
MLD351-8 47
MLD355-8 47
MLD404-16 48
MLD406-16 48
MLD410-12 48
MLD452-12 48
MLD453-16 48
MLD454-12 48
MLD456-16 48
MLD460-12 48
MLD527-16 48
MLD542-16 48
MLD552-12 49
MLD561-12 48
MLD5610 27
MLD5612 27
MLD5614 27
MLD5616 27
MLD570-12 49
MLD5800 27
MLD5802 27
MLD5804 27
MLD5810 27
MLD5812 27
MLD5814 27
MLD5820 39
NUMERICAL INDEXItem Page
MLD5822 39
MLD5824 39
MLD5840 22
MLD5842 22
MLD5844 22
MLD5846 22
MLD5848 22
MLD5860 22
MLD5864 16
MLD5866 16
MLD5900 24
MLD5902 24
MLD5903 24
MLD5910 24
MLD5912 24
MLD5914 25
MLD5916 25
MLD5918 25
MLD5920 25
MLD5922 24
MLD5924 25
MLD5926 25
MLD5928 25
MLD5940 31
MLD5942 31
MLD5944 31
MLD5946 25
MLD5949 31
MLD5950 31
MLD5952 31
MLD5954 31
MLD5956 31
MLD5958 25
MLD5960 31
MLD5962 24
MLD5964 31
MLD5966 31
MLD5968 31
MLD5970 31
MLD5972 31
MLD5976 31
MLD5978 31
MLD5979 31
MLD5980 31
MLD5982 31
MLD5986 31
MLD6000 31
MLD6002 31
MLD6004 31
MLD6005 31
MLD602-8 49
MLD603-8 49
Item Page
MLD610-8 49
MLD611-12 49
MLD612-12 49
MLD618-8 49
MLD626-8 49
MLD648-16 49
MM187 37
OP-3 43
OP-5 43
OP-7 43
OS101 39
OS102 39
PB170 40
PB171 40
PB183 40
PB185 40
PB186 40
PB187 40
PB192 40
PB193 40
PM07 28
PM08 28
PM09 28
PM10 28
PM11 28
PM12 28
PM14 28
PM20 28
PM22 28
PM22-PL 13
PM22-PL 28
PM23-B 28
PM24 28
PM25 29
PM26 29
PM27 29
PM28 29
PM29 29
PM50 29
PM52 29
PM54 29
PM55 29
PM57 29
PM58 29
PM59 29
PM70 29
PM71 29
PM72 29
PM73 29
PM74 29
PM484 27
PM485 26
Item Page
PM486 27
PM490 27
PM492 27
PM494 27
PM495 27
PM500 27
PM505 26
PM511 26
PM525 26
PM526 26
PM529 26
PM530 39
PM535 26
PM537 39
PM539 26
PM561 39
PM56-B 29
PM570 26
PM580 26
PM586 39
PM590 26
PM593 26
PM597 26
PM8511 30
PM8520 30
PM8522 30
PM8523 30
PM8524 30
PM8525 30
PM8528 30
PM8532 30
PM8535 30
PM8536 30
PM8540 30
PM8541 30
PM8545 30
PM8546 30
PM8552 30
PM8553 30
PM8555 30
PM8557 30
PM8558 30
PM8560 30
PM8561 30
PM8564 30
PM8565 30
PM8568 30
PM8569 30
PM8572 30
R356 41
R371 41
R445 41
Item Page
R610 40
R620 40
RB3 5
RE104 27
RE107 27
Rope038 27
Rope012 27
Rope034 27
Rope100 27
Rope114 27
Rope112 27
Rope200 27
Rope214 27
Rope300 27
Rope400 27
ROS158 41
ROS159 41
ROS160 41
ROS161 41
ROS162 41
ROS163 41
ROS164 41
ROS165 41
ROS166 41
ROS167 41
ROS168 41
ROS169 41
SCB045 43
SCB046 43
SCB047 43
TC120 36
TC140 36
TC150 36
top related