moulded components - vogl deckensysteme gmbh · pdf fileof space. effective ceiling ... made...
Post on 30-Mar-2018
218 Views
Preview:
TRANSCRIPT
147
Mou
lded
Co
mpo
nent
s
Delivered to the site in perfect shape
in any Shape or FormCurved Ceilings
Moulded Components
147
Moulded Components
148
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10 D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
Moulded Components
120º 135º 150º
45º 60º 75º 90º 105º
Other angles on request
Available angles
1. Delivered flat 2. Remove cover paper 3. Press limbs firmly together
Key advantages:• Glueless joining of moulded components on site, no priming,
no drying times• Easy on-site handling of moulded components• High adhesive strength immediately• Angle adjustment of ± 2° after adhesion• Delivered flat - less handling damage
Note:Vogl Fold Fix moulded components must be installed without any stresses acting upon them. The free limb must always be fixated.
4. Done!
Available V-grooves
Experience a room through precisionThe bending and folding technology offers an abundance of creative design possibilities. An optimum ceiling solution can be realised with linear V-grooves.
In addition to the Vogl Fold Fix, it is the various angles or edges, but also the bent and rounded moulded components that create – depending on customer desire and design – an impressive experience of space.
Effective ceiling design can be realized with accurately sized custom-made moulded components, such as quarter shell, half shell, lamella, funnel, dome or vault.
VoglFalt-Fix glued unglued
Special unglued moulded components come flat and must be assembled and glued on-site.
Special glued moulded components come ready to install.
Fold Fix moulded components come flat (space-saving) and factory-supplied with VoglFalt-Fix adhesive tape.
149
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10 D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
Moulded Components
VK HRAK AK RK FK SK PU KU lamella
Available edge designs (subject to technical feasibility)
full edge half-round flattened edge
flattened edge
round edge chamfered edge
cut edge lamella edgecardboard-clad edge
paper-clad edge
A
DF
DFH2
GM-FH1I
Plasterboard type A as per EN 520Plasterboard type GKB as per DIN 18180
DescriptionType
6.5 mm9.5 mm
10.0 mm12.5 mm
12.5 mm15.0 mm18.0 mm20.0 mm25.0 mm
12.5 mm15.0 mm20.0 mm25.0 mm
12.5 mm
Performance Thickness in mm
Plasterboard type DF as per EN 520Plasterboard type GKF as per DIN 18180
Plasterboards with improved fire behaviour
Plasterboard type DFH2 as per EN 520Plasterboard type GKFI as per DIN 18180
Plasterboard type GM-FH1I as per DIN EN 15283-1
Plasterboards with reduced water absorption (impregnated)
Waterproofed special panel for use in damp rooms
Available panel designs / thicknesses
Standard plasterboardNote: Available in 10 mm thickness as Thermotec panel or Thermotec panel PLUS (containing graphite)
150
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10 D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
= face sideV-grooves
Moulded Components
151
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10 D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
= face sideV-grooves
Moulded Components
152
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10 D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
= face sideV-grooves
Moulded Components
153
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
Special elements
Moulded Components
154
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10 D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
Layered structure of panel
One-ply, slotted Multi-ply, slotted Multi-ply
Quarter shell 90° Half shell 180° Segmental shell 15° - 180°
Free form shell Free form shellFree form shell with V-groove attached
One side Both sides Axial Radial
Shapes
Start element Offset
Moulded Components
155
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
Cuts
Note: The illustrated moulded components do not show the necessary suspension/framework completely. When planning a project, however, they must be individually considered.
V-grooves
Shells
Moulded Components
156
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10 D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
Plasterboard strips
Rounded L-angles
Note: The illustrated moulded components do not show the necessary suspension/framework completely. When planning a project, however, they must be individually considered.
Shells
Moulded Components
157
Mou
lded
Co
mpo
nent
s
Vogl Deckensysteme GmbH Germany
Industriestrasse 10D-91448 Emskirchen
Phone: +49 9104 825-0Fax: +49 9104 825-250
info@vogl-ceilingsystems.comwww.vogl-ceilingsystems.com
Lamellas
Baffles
Note: The illustrated moulded components do not show the necessary suspension/framework completely. When planning a project, however, they must be individually considered.
Moulded Components
top related