mistral back rosmech 08anew.rosmech.com/pdf/scarab mistral hino euro 4 australian techspec.pdfthe...
Post on 18-May-2018
216 Views
Preview:
TRANSCRIPT
The Mistral is Scarab's auxiliary-engine powered sweeper, providing a modern alternativefor operators who prefer a twin-engined sweeper configuration but who also seek toemploy the latest technology and Scarab's renowned sweeping power.Built on Hino chassis 15.1 tonnes and powered by a Cummins QSB 3.3 Tier 3A turbo-charged auxiliary diesel engine coupled to Scarab's proven fluid-drive system, the Mistralis not so much an alternative sweeper as an alternative range of sweepers, designed tocope with every conceivable sweeping situation.The introduction of the Cummins engine presented an ideal opportunity to conduct adesign review of the Mistral. The control system has been upgraded to CANbus 2 and wehave added a number of new features further enhancing the Mistral's outstandingrecord of performance and overall usability.
SCARAB MISTRAL
Scarab Sweepers Ltd - Pattenden Lane - Marden - Tonbridge - Kent - TN12 9QD Tel: 01622 831006 - Fax: 01622 832417 Email: scarab@scarab-sales.com - www.scarab-sweepers.com
To meet the challenge of continued demandfor Scarab`s truck-mounted sweepers in theever-changing market place, we have developedthe Mistral auxiliary engined sweeper. Now users can specify a modern alternative to the traditional auxiliary engined sweeper and a Scarab alternative to our range of single engined sweepers.The Mistral combines the outstanding sweeping power and versatility that all Scarab users havecome to expect. And like all Scarabs, the Mistralutilises our compact and proven hydraulic drivesystem for ALL sweeping functions.No gearboxes - clutches or drive belts, just quiet,efficient suction and sweeping performance.Hopper Void: Two body sizes available. 6.2 m³ and7.2 m³ *. These translate to effective capacities of5.5 m3 and 6.5 m3.Superb sweeping performance with an impressive3.20 m sweep width.
A separate stainless steel water tank of 1250 litrecapacity supplies the high-pressure system andalso the dust suppression jets on all brushes andsuction nozzles. The tank is mounted for superiorweight distribution and stability, this is especially ofbenefit when discharging the hopper payload. A highly efficient, dynamically balanced, overhead-mounted suction fan provides air movement at anominal 2.8 m³/sec for superb suction performance.CANbus 2 control system for flexibility of operationand servicing. Superior build-quality throughout with stainless steelhopper body. Super-efficient turbo-diesel auxiliary power unit. Excellent access to all areas for servicing and maintenance activities. Low in-cab operating noise levels.* Subject to model/chassis specification
MISTRAL KEY FEATURES
Hopper Construction Stainless SteelHopper Voided Volume 6.2 m3 & 7.2 m3
Auxiliary Power Unit Turbo-charged diesel engineSweep Width 3200 mmWater Tank 1250 LitresChassis GVW 15.1 tonneControl System CANbus TechnologyWander Hose 4 metreDust Suppression On all brushes and suction nozzles
SWEEP WIDTHS 6.2 m³ BODY
NOZZLE & SIDE BRUSH
NOZZLE, SIDE BRUSH& WIDESWEEP BRUSH
TWO NOZZLES, TWO SIDE BRUSHES& WIDESWEEP BRUSH
NOZZLE ONLY
1060
2400
3200
740
SWEEP WIDTHS 7.2 m³ BODY
NOZZLE & SIDE BRUSH
NOZZLE, SIDE BRUSH& WIDESWEEP BRUSH
TWO NOZZLES, TWO SIDE BRUSHES& WIDESWEEP BRUSH
NOZZLE ONLY
1135
2400
3200
740
TechnicalSpecification Euro 4
Scarab Mistral
Providing users with the outstanding sweeping power that all Scarab operators have come to expect, the Mistral range has been developed specifically to satisfy a preference for the traditional form of truck-mounted sweeper. The use of a well-proven auxiliary power unit coupled to Scarab’s tried and tested hydraulic drive system for ALL sweeping functions has resulted in a twin-engine sweeper for the future. No gearbox - No drive belts; just quiet and supremely efficient suction and sweeping performance.
• Superb performance with sweeping widths of 2.95 m, 3.2 m or 3.4 m depending upon model selected.
• Seperate stainless steel water tank, ranging from 900 litres to 2500 litres and mounted for superior weight distribution and stability; especially when dis-charging.
• Highly efficient, overhead-mounted suction fan providing air movement of 2.8 m3/sec nominal.
• CANbus control system for flexibility of operation and servicing.• Superior build-quality throughout with stainless steel hopper body.• Super-efficient turbocharged auxiliary power unit.• Excellent access to all areas for servicing and maintenance activities.• Extremely low in-cab noise levels.• Available for chassis ranging from 10 to 19 tonne GVW with a choice of three
body sizes.AUXILIARY POWER UNIT: A well-proven turbo-diesel unit coupled to Scarab’s unique fluid
drive system to power all sweeping functions. The Scarab approach effectivly simplifies the sweeping system eliminating the need for complex drive belts arrangements or gearboxes.The auxiliary unit is supplied by a dedicated fuel tank of 115 litres minimum capacity.
SUCTION FAN: The dynamically balanced 900 mm diameter suction fan is mounted in the hopper top and, as with all Scarab sweepers, is powered by a load-sensing pump to give the highest performance and efficiency while minimising noise level. The impellor is a highly efficient multi-blade centrifugal unit, giving a nominal airflow of 6000 ft3/min. (170 m3/min.).
1
Mounting the fan on the hopper top creates a virtually straight airflow from the suction nozzles. This makes the Scarab Mistral extremely efficient and significantly reduces power requirements. Two operating modes are provided, Standard Mode for normal sweeping and Boost Mode which significantly increases suction power for more arduous conditions.
SUCTION NOZZLE: Of all-steel construction, the 740 mm wide suction nozzle is mounted in a trailed frame running on 250 mm diameter rubber tyred wheels. The suction nozzle is either 740 mm or 840 mm wide (dependent upon specification) and is fitted with replacable and adjustable rubber flaps and a skid plate. A 250 mm diameter suction hose connects the nozzle to the hopper. Flap to ground clearance is between 25–30 mm resulting in a long flap life and less need for adjustment. Four manually adjustable water spray jets are fitted to the nozzle at 90° intervals to provide an internal dust suppression spray. Additional water injection nozzles are available when required. An optional 4-jet water boost bar can also be fitted in front of suction nozzle for use in extreme conditions. A tilting mechanism, controlled by a pneumatic ram, enables the suction nozzle to accommodate large objects or autumn leaf build-ups with ease.
SIDE BRUSH: 500 mm or 650 mm diameter steel-tined quick-change brush (dependent upon specification) with direct drive hydraulic motor, fitted in a trailed linkage with kick-back protection and pneumatic ram for in/out control. The assembly is fully adjustable for brush angle and provides three brush speeds (nominally 100 / 125 / 150 RPM). Optional up/down brush pressure control is available if required. A work light is fitted to assist with low light operation.
WIDE SWEEP: Comprising 320 mm or 400 mm diameter (dependent upon specification) replaceable polypropylene segments and powered by a direct-drive hydraulic motor, the assembly is fully-floating, with shock absorbers to prevent bounce, and is fitted in a trailed linkage to ensure parallel, even brush wear. Three brush speeds are provided (nominally 200 / 250 / 300 RPM). Optional up/down brush pressure control is available upon request.
WATER PUMP: A self-priming pump fitted with suction filter, driven by a direct-drive hydraulic motor. Solenoid valves operated from the main control panel direct water supply to the brushes and suction nozzles.
WANDER HOSE: A lightweight flexible four metre long suction hose of 150 mm diameter, complete with aluminium extension tube and adjustable handle for cleaning awkward areas or gullies. Quick release wander hose points are located at either side of the rear door. The wander hose can be used simultaneously with sweeping or on its own for more powerful suction. Optional rear-mounted overhead boom with aluminium or steel gully entry tube can be fitted if required.
HOPPER: Totally constructed from corrosion and abrasion resistant stainless steel, the hopper is fitted with large access doors on either side and a reinforced rear door with heavy-duty seals. The rear door incorporates an automatic closure system which clamps the door at 3 points, for a watertight seal, and body-drain fittings for removal of excess water.All inlet tubes are fitted with automatic blanking flaps and an easy-to-clean swing-down filter screen is mounted in the top of the hopper immediately below the suction fan. A storage compartment is provided, located on right hand side of the body. The hopper is tipped by means of a two-stage tipping ram facilitating rapid load discharge. the Mistral Hopper is available in various sizes to suit the required service profile and size of chassis as follows:
ACCESS DOORS: Large doors fitted each side of the hopper for hand-loading bulky items.
GROSS HOPPER VOLUME PAYLOAD CAPACITY CHASSIS SUITABILITY
6.2 cubic metres 5.5 cubic metres 10 - 15 tonne
7.2 cubic metres 6.5 cubic metres 13 - 18 tonne
8.5 cubic metres 7.5 cubic metres 18+ tonne
2
HYDRAULIC SYSTEM: The hydraulic system comprises one axial piston pump, with automatic control of output and pressure, which drives the suction fan and two gear pumps to provide working pressure for all other hydraulic services. The system is piped in zinc plated steel tubing, where practical, and is protected by 10-micron filters to ensure long component-life. The system’s oil is cooled via a heat exchanger with a hydraulically driven high-performance fan, ensuring optimum cooling under the most arduous working conditions and high ambient temperatures. The hydraulic control valves are located for easy servicing in a protected compartment. All hydraulic services, apart from rear door closure can be operated from the in-cab control panels.
HYDRAULIC TANK: Located adjacent to the oil cooler, it has a capacity of 15 litres and is equipped with a 10 micron return filter, air breather/filler cap, a suction strainer and a sight glass with automatic low-level shut off.
PNEUMATIC SYSTEM: The pneumatic system is connected to the vehicle auxiliary air supply, and is fitted with a pressure regulator, filter/water separator and pneumatic solenoid valves to control the side brush, wide sweep brush and suction nozzle. The pneumatic valves are located for easy servicing in a protected compartment.
CANbus CONTROL PANEL: Scarab’s tried and tested CANbus system has been in service since 2003 and has proved to be a very successful and welcome innovation. An ergonomically designed panel adjacent to the driver’s seat contains all controls for operating the suction fan, brushes, hopper, work lights and water sprays. The panel is also capable of displaying operating data such as Fan speed, Distance and Hours Swept and provides system diagnostics and fault-finding checks on sweeping functions. An additional satellite control box for frequently used operations is mounted conveniently to hand.
WATER TANK: Ranging from 900 - 2500 litre capacity (dependent upon specification) and manufactured from corrosion resistant stainless steel. Filling is achieved by means of a hydrant connection with regulation air break, or alternatively by means of hose pipe and special adaptor. The tank is also fitted with a sight-glass / level indicator and suction strainers for the water pumps.
PAINTING: Two pack system single colour, optional multi colour and sign-writing.
SWEEPING WIDTHS:
On dual sweep machines the Scarab Mistral has the option of operating with both side brushes and nozzles simultaneously to give an unrivalled sweeping width.
The suction nozzle, side brush and wide sweep brush can be raised or lowered independently of each other. This provides various sweeping patterns to suit differing road conditions.
SUCTIONNOZZLEONLY
SUCTION NOZZLE& SIDE BRUSH
SUCTION NOZZLE,SIDE BRUSH& WIDESWEEP
BOTH NOZZLES,BOTH SIDE BRUSHES& WIDESWEEP
Sweep Widths in mm
MODEL 6.2 7.2 8.2
DIM A 740 740 840
DIM B 1060 1135 1235
DIM C 2000 2075 2275
DIM D 2950 3200 3400
3
TYPICAL WEIGHT DATA:Scarab equipment weights are:• Single sweep configuration (including fixed widesweep) - - - - - - - - - - - - -2180 kg• Dual Sweep configuration (including swivelling widesweep) - - - - - - - - - - -2340 kg
CHASSIS SUITABILITY:The Scarab Mistral can be mounted on a range of chassis.For details of suitable chassis specifications please contact the Sales Department.
TYPICAL DIMENSIONAL DATA:
OPTIONS:A comprehensive range of options is available, please contact the Scarab Sales Department for further information.
Scarab Sweepers are dedicated to continuous product development and as suchwe reserve the right to change this specification without prior notice.
To ensure latest information contact Sales Department.
Issue - March 2007 / E & OE
CHASSIS/MODEL PAYLOAD POTENTIAL
10/12 tonne chassis with 6.2 cubic metre body Upto 4000 kg
18+ tonne chassis with 8.2 cubic metre body Upto 9500 kg
For chassis/model specific payload information please contact the Scarab Sales Department
Length Overall A 5500 mm
Height Overall B 2980 mm
Front Overhang C 1240 mm
Rear Overhang D 1350 mm
Wheelbase E 3330 mm
Max Height (Hopper Up) F 4180 mm
The following are indicative only. For specific chassis related details please contact the Sales Department.
Pattenden Lane, Marden, Tonbridge, Kent. TN12 9QDTelephone: 01622 831006Fax: 01622 832417E-Mail: scarab@scarab-sales.comWeb Site: www.scarab-sweepers.com
4
key FeATUReSABS Brakes
Allison 3000 Automatic Transmission
Front Axle Stabiliser
Optional FUP Compliance
Drivers SRS Airbag
Heated & Electrically Operated External Mirrors
GVM 15,500kg
GCM 24,000kg
Power 206kW @ 2400 RPM
Torque 824Nm @ 1500 RPM
Transmission Five-speed automatic
Wheelbase 3780mm
key SPeCiFiCATionS
www.hino.com.au
FG 1628 Autos e r i e s
Medium Duty
* Illustration may contain item not standard to the model
A Toyota Group Company
4 x 2 Cab ChassisADR 80/03 Model
engine & Drivelinespecifications
ENGINE
Model Hino J08E-VD
Max output (ISO Net) 206kW (280 PS) at 2400 RPM
Max output (JIS GROSS) 210kW (285 PS) at 2400 RPM
Max torque (ISO Net) 824Nm (84kgf/m) at 1500 RPM
Max torque (JIS GROSS) 843Nm (86kgf/m) at 1500 RPM
Max engine speed 2500 RPM
Engine compliance ADR 80/03
Type Diesel, turbocharged & intercooled, six-cylinder
in-line, overhead camshaft & water-cooled
Combustion system Direct injection with EGR
Bore & stroke 112 x 130mm
Piston displacement 7 684L
Compression ratio 17:1
Engine oil capacity 12 7L
Coolant capacity 25 5L
Fuel injection pump Electronic control common-rail type
Intake system Stack-type air intake
Air cleaner Dual paper elements
Air compressor type Single cylinder, water-cooled
Bore & stroke 85 x 40mm
Fan clutch Equipped
Exhaust Horizontal outlet with DPR
Emission Control System EGR & DPR meeting ADR 80/03 using EURO V Std
AXLE LOAD & TYPE Axle load limit Front axle 6500kg
Rear axle 10,000kg
Front axle type MF671 series, Reversed Elliot, I-Beam
Rear axle type SH16 full-floating, single reduction,
single-speed hypoid
SUSPENSION
Front suspension Type Semi-elliptic tapered leaf springs with shock
absorbers & stabiliser
Size 1470 x 80mm
Rear suspension Type Semi-elliptic main & auxiliary leaf springs
Main spring size 1400 x 90mm
Auxiliary spring size 980 x 90mm
WHEELS & TYRES
PERFORMANCE
Calculations based on 15 5 ton GVM, 11R22 5 drive tyres
Engine RPM @ 100km/h 2150
Speed limited to (km/h) 100
Max theoretical speed (km/h) 116
Gradeability tan (%) @ GVM 47 5
FG 1628 Auto
BRAKES
Type Full air, dual circuit, “S” cam type, leading
& trailing shoes for front and rear
Drum diameter x lining
Width Front: 406 4 x 127mm
Rear: 406 4 x 203mm
Air dryer Equipped
ABS Equipped
Parking brake type Spring brake, acting on rear wheels
Exhaust brake type Electric-pneumatic with valve in exhaust pipe
TRANSMISSION & GEAR RATIOS Model Allison 3000 fully automatic
Type Five forward & one reverse speeds, overdrive
Control Electrical
Rear axle gear ratio 5 428:1
1st 3 487
2nd 1 864
3rd 1 409
4th 1 000
5th 0 750
Rev 5 027
FUEL TANK Capacity 200L
Fuel pre-filter & sedimenter Equipped
Fuel tank cap key Equipped
Wheel type 10-stud disc wheel (ISO type) 335 PCD
Rim size 8 25 x 22 5 – 165-12mm
Tyre size Front: 295/80R22 5 – 152/148
Rear: 11R22 5 – 148/145
Number of tyres Seven (including one spare tyre)
Spare tyre carrier Equipped
Cab, instrumentation & Chassis
CAB DETAILS Type Forward control, all-steel construction mounted
on coil spring suspension with electro hydraulic
tilt mechanism
ECER29 Cab strength Compliant
Drivers SRS Airbag Equipped with pretensioner seatbelt
Seating capacity Two
Driver’s seat Urethane foam pads, high-back, 4-way adjust-
able seat with fabric cover & air suspension
Side passenger’s seat Urethane foam pads, high-back & reclining seat
with fabric cover, air suspension
Seat belt 3-point type on driver’s & side passenger’s seat
Sun visor and overhead console For driver & passenger sides
Windshield wipers Electric, dual, intermittent & 2-speed
Ventilator Forced type by electric blower
Rear view mirrors External: Electric & heated, flat type,
two convex spotters
Cigarette lighter 24V Equipped
Floor mat Vinyl type
Front air spoiler Equipped
Central locking & keyless entry Equipped with immobiliser
Heater and defroster Standard
Air conditioner Standard
Trim Full trim type (side, roof & back)
Cab pockets Equipped on both door sides
Power windows Equipped
Rest area Equipped
Car audio AM/FM radio with CD player
Speakers Driver & passenger sides
Foot rest Equipped
Engine control link Equipped
Speed limiter Equipped
Cup holder Equipped
CHASSIS FRAME
Type Ladder-shaped channel section side rails
Rear chassis width 870mm
Max section (depth x flange x thickness) 269 x 85 x 7 5mm
Tensile strength 540N/mm2 {55 kgf/mm2}
Hooks Equipped for front & rear
Chassis step Equipped
POWER & TORqUE CHART (ISO Net) J08E-VD
STEERING Type Telescopic and tilt steering column with locking
device Recirculating ball with Integral Power
Steering
Gear ratio 20 2:1
Steering angle Inside: 39-42˚ Outside: 32˚
INSTRUMENTS
1. Meters & gauges
Speedometer with trip meter
Odometer
Tachometer
Fuel gauge
Coolant temperature gauge
Air pressure gauge
2. Switches
One-key starting-stopping
Lighting
Directional indicator, dimmer
& passing
Wiper and washer
Hazard lamp
Exhaust brake
Map lamp
Fog lamp
DPR regeneration
Mirror controls
3. Warning, pilot lamps & buzzers
Oil pressure warning lamp
& buzzer
Air pressure warning lamp & buzzer
Engine over-run warning buzzer
Coolant level warning lamp & buzzer
High beam indicator lamp
Turn signal indicator lamp
Parking brake indicator lamp
Seat belt warning lamp & buzzer
Exhaust brake indicator lamp
Engine control system warning lamp
Hazard indicator lamp
Back-up warning buzzer
Speed limiter warning indicator lamp
AT lamp
AT oil temperature lamp
4. Others
Idle up control knob
Horn button
12V electric source
ELECTRICAL
Type 24V, negative earth
Batteries 2 x 12V, series-connection Capacity 120Ah at
20-hour rate
Alternator type With built-in rectifier & voltage regulator
Capacity 24V, 90A
Starter type 24V, 4 5W
Headlamps Halogen type including fog lamps
High/low beam Equipped
Fluorescent reading lamp Equipped
Electric horn Equipped
FG 1628 Auto
240
220
200
180
160
140
120
100
280
260
240
220
200
180
1000 1400 1800
ENGINE SPEED (rpm)
OUTPUT (kW)
(PS)
(kgf-m)TORQUE (N-m)
2200 26002400
24003000
700
600
500
400
900
80085
75
65
647Nm /1500rpm(66kgm/1500rpm)647Nm /1500rpm(66kgm/1500rpm)
162kW /2400rpm(220ps/2400rpm)162kW /2400rpm(220ps/2400rpm)
J07E-TR
220
100
120
140
160
180
200280
260
240
220
200
180
1000 18001400 2200ENGINE SPEED (rpm)
OUTPUT (kW)
(PS)
(kgf-m)TORQUE (N-m)
2600 3000
400
500
600
700
80085
75
65
716Nm /1500rpm(73kgm/1500rpm)
193kW /2500rpm(263ps/2500rpm)176kW /2400rpm(240ps/2400rpm)
J07E-TP
220
200
180
160
140
120
100
280
260
240
220
200
180
1000600 1400 1800ENGINE SPEED (rpm)
OUTPUT (kW)
(PS)
(kgf-m)TORQUE (N-m)
2200 26002400
3000
700
600
500
400
900
80085
75
65
794Nm /1500rpm(81kgm/1500rpm)
193kW /2500rpm(263ps/2500rpm)191kW /2400rpm(260ps/2400rpm)
J07E-TN
280
260
240
220
200
180
160
140
120
350
320
290
260
230
200
1000800 1200 1400ENGINE SPEED (rpm)
OUTPUT (kW)
(PS)
(kgf-m)TORQUE (N-m)
1600 18002100
2000 2200 2400
1000
900
800
700
600
500
400
1200
1100
120
100
80
1079Nm /1100rpm(110kgm/1100rpm)
193kW /2500rpm(263ps/2500rpm)
A09C-TT
240
260
280
220
200
180
160
140
120
350
320
290
260
230
200
1000800 1200 1400 1600 1800 2000 2200 2400ENGINE SPEED (rpm)
OUTPUT (kW)
(PS)
(kgf-m)
TORQUE (N-m)
1200
1300
1100
1000
900
800
700
600
500
130
110
90
1275Nm /1100rpm(130kgm/1100rpm)
193kW /2500rpm(263ps/2500rpm)235kW /1800rpm(320ps/1800rpm)
AO9C-TU
200
220
240
180
160
140
120
100
280
260
240
220
200
180
1000 1400 1800 2200 2600
2400
3000
OUTPUT (kW)
(PS)
(kgf-m)TORQUE (N-m)
900
800
700
600
500
400
85
75
65
824Nm /1500rpm(84kgm/1500rpm)
193kW /2500rpm(263ps/2500rpm)204kW /2400rpm(280ps/2400rpm)
J08E-VD
200
220
240
180
160
140
120
100
280
260
240
220
200
180
1000600 1400 1800 2200 2600
2400
3000
ENGINE SPEED (rpm)
600
ENGINE SPEED (rpm)
OUTPUT (kW)
(PS)
(kgf-m)TORQUE (N-m)
900
800
700
600
500
400
85
75
65
637Nm /1500rpm(65kgm/1500rpm)
193kW /2500rpm(263ps/2500rpm)158kW /2400rpm(215ps/2400rpm)
J08E-VE
221kW /2100rpm(300ps/2100rpm)
DIMENSIONS - mm / Capacities
Date of issue - 01/01/11 FG 1628 Auto V3.1
OW
OH
ROHF
OL
CA
WB
Model Hino FG 1628 Auto
Product code FG8JGMB-UHU
Wheelbase (WB) 3780
Overall length (OL) 6345
Overall width (OW) 2450
Overall height (OH) 2645
Cab to rear axle centre (CA) 2920
Rear overhang (at frame end) (ROHF) 1285
Front chassis height (HF) 960
Rear chassis height (HR) 1025
Road clearance (at diff case) (RC) 250
Front track (FT) 1925
Rear track (RT) 1840
Turning circle kerb to kerb 14,000
Turning circle wall to wall 14,500
Chassis mass – kg (standard tools, 10 litres of fuel, without spare tyre)
Total 5025
Front 3090
Rear 1935
GVM 15,500
GCM 24,000
WARRANTY New vehicle warranty period
Medium Duty Model Axle configuration Standard warranty(whichever comes first)
Cab corrosion perforation
500 FG 1628 Auto 4 x 2 3 years or 150,000km 36 months
DISCLAIMER Important notice Hino Trucks are distributed in Australia by Hino Motor Sales Australia Pty Ltd A C N 064 989 724 All efforts have been made to ensure the information contained in this brochure was correct at time of printing or uploading Hino Motor Sales Australia Pty Ltd reserves the right to alter any details of the specifications and equipment without notice Hino in so far as it is permitted by law to do so, shall not be liable in any way as a result of any reliance placed by any person on anything contained in this brochure You should therefore check with your authorised Hino dealer at the time of ordering your motor vehicle to ensure that colour, specifications, equipment, design features and options are available for the vehicle you are ordering Please note that some options may only be available in combination with others Authorised Hino dealers will on request provide up to date information on all accessories, design features, prices and availability
* For conditions, refer to the Hino Parts & Service warranty brochure
Battery warranty – 12 months from date of delivery Genuine parts or accessories warranty – 3 years unlimited kilometres when fitted by an authorised Hino dealer *
GENUINE ACCESSORY OPTIONSBull barChrome wheel coversElectric mirrorsMultimedia sat nav Rear vision cameraRoof scoop
Side skirtsStoneguardSunvisorTimber dash panelEngine driven PTO 1:1 08 step-upFUP bull bar
Please check with your dealer for price, availability & fitment for these options
www.hino.com.au
s e r i e s
DimensionsFG 1628 Auto
top related