mc157 quick start guide - philips€¦ · quick start guide 2 user manual quick start guide user...
Post on 30-Apr-2020
27 Views
Preview:
TRANSCRIPT
Quick Start Guide
What’s in the Box?You should find these items upon opening the box.
MC157
1Quick Start Guide
2User Manual
Quick Start Guide User manual
3
1
2
Remote Control
MC157_QSG_Eng 4/1/10, 21:261
speaker(right)
speaker(left)
FM wire antenna
AC power cord
1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:It is unnecessary to connect the FM pigtail antenna since itis fixed to the main unit.
2
1
MC157_QSG_Eng 4/1/10, 21:262
5
1
2
3
4
Setting the clock
In standby mode, press and hold CLOCK/DISPLAY on theremote control set for 2 seconds.
Press PROG to select 12-hour or 24-hour display.
Press CLOCK/DISPLAY to confirm.➜ The clock digits for the hours flash.
Press TUNING 4 ¢ (à / á on the remote control)to set the hours.
Press CLOCK/DISPLAY again.➜ The clock digits for the minutes flash.
Press TUNING 4 ¢ (à / á on the remote control)to set the minutes.
Press CLOCK/DISPLAY to confirm the time.
6
7
12
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press downon PULL TO OPEN to close the CD door.
PressÉÅto start playback.
Press 9 to stop playback.
MC157_QSG_Eng 4/1/10, 21:263
© Royal Philips Electronics N.V. 2010All rights reserved.
http://www.philips.com
MC157_61_QSG_V2.0
Tip:Detailed playback features andadditional functions are described inthe accompanied owner's manual.
1
2
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stationsin order of waveband.
Press PRESET +/- until the desired preset station is displayed
Programming and tuning to radio stations
3
Notes for the remote control:– First, select the source you wish tocontrol by pressing one of the source selectkeys on the remote control (DISC or AUX,for example).– Then select the desired function ( 2;,í, ë for example).
MC157_QSG_Eng 4/1/10, 21:264
top related