material & package testing laboratory...wonastow road monmouth np25 5tw tel: +44 (0) 1600 772222...
Post on 11-Jun-2020
0 Views
Preview:
TRANSCRIPT
Wonastow RoadMonmouth NP25 5TWTel: +44 (0) 1600 772222Direct: +44 (0) 1600 775707Fax: +44 (0) 1600 716533e-mail: monlab@triwall.dssp.com
MATERIAL & PACKAGE TESTING LABORATORY
CLIENT : KAYSERSBERG PLASTICS
24 November 2003
PURPOSE OF TESTING
To determine the compressive value of four different types of plastic case.Three samples of each case were supplied.Approximate external dimensions of case: 785 x 369 x 160 mm
CONDITIONING OF SAMPLES
The samples were not conditioned prior to testing.
RESULTS
Compressive value
Mean values:
A/A 506 kgA/B 479 kgB/A 576 kgB/B 517 kg
Please note that the value above is a compressive value not a stacking load value.
The result should only be used as a guide as the number of samples tested limits the accuracy of the test.
Page 1 of 2 23/11/11
Photographs
Included is a selection of photographs showing the cases after compression.
I hope this is satisfactory. If you should require any further information, please do not hesitate to contact me
Ben Ôven Quality Technician
Page 2 of 2 23/11/11
top related