manufacturer of valves 3/4 way high pressure ball valve
Post on 27-Dec-2021
5 Views
Preview:
TRANSCRIPT
ASME600, 900 & 1500
SIZE: 1/2"-2"
Manufacturer of Valves
Manufacturer of Valves
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5-220-9374 / Fax : 886-5-221-7018
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net 2006 ZIPSON ALL RIGHTS RESERVED
Item 513F
3/4 Way High Pressure Ball Valve
ZIPSON'S 513F, 3600 psi, 3/4 way high performance flanged ball valve was designed for the high pressure industrial pipe l ine. With T/L/X/I-port for 3/4 way block body type, easy to f ind a suitable f low pattern for any application which is a smart way to save the cost on pipe l ine construction and space. With ISO direct mounting pad design, 513F is able to assemble the actuator directly.
513F was designed according to ASME B16.34. 513F is with 4 seats, this wil l help to keep the ball posit ion
. The trunnion ball/ stem help to stand high working pressure and protect the seat and keep from leakage to prolong the l i fe t ime. The valve is totally solid designed for oil & gas application or other high pressure application for both mixing and diverter purpose.
End caps can be ASME 600/ 900/ 1500. The same
stable
center section is also suitable for thread/ SW/ BW ends on 513T type.
513F valve can be with cavity f i l lers to f i l led all the valve cavity over 90%. This wil l help to keep the media from leaving in the cavity for easy cleaning & anti-sticky of the ball. Of course, the internal body need to be machining first for the service.
The size range of 513F is now complete from 1/2" to 2" (DN15 to DN50), and wil l be ready to expand up to 4" with Class 600 & Class 900 pressure rating soon. TFM/ TFM4215 seat material for Class 600 (DN15 to DN50) and PEEK/ Delrin for Class 900/ 1500 is the standard option.
Extraordinary material such as Hastelloy C, Monel, Alloy 20, Duplex are available, too, for special media or environment.
Manufacturer of Valves
Manufacturer of Valves
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5- / Fax : 886-5-221-7018
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net
220-9374
2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.2
DIMENSIONS, 1/2" to 2" (mm)
112
123
126
145
50
70
50
50
70
102
7.2
9.2
7.2
7.2
9.2
11.4
11
11
14
17
160
160
310
310
125 11.4 13.5190 102 22 310
-
-
-
-
F G d2 H PE d1
1/2"
3/4"
1"
1 1/2"
2"
20
25
38
52
63
73
92
11
11
14
17
50 26127
15
SIZE(full port) A B B1
4 WAY "LL"(X) PORT4 WAY "LL"(X) PORT
2727 2626
1/2"~3/4"1/2"~3/4"
LL
CC DD
TT
PP
B1
B1
BB
EE
AA
6.46.4M-NM-N
2020212122222323
11
22
33
44
55
66
77
88
99
1010
1111
1212
1313 1414 1515 1616 1717 1818 1919
GG
* Body & end caps quality investment casting* Construction design fol low ASME B16.34 standard* Flange connection - ANSI B16.50* Available in stainless steel or carbon steel* with ISO 5211 direct mounting pad* Adjustable stem packing* Blow-out proof stem design* Available in L/ T/ X/ I-port* Trunnion and Full bore design* Temperature range -20 F to 450 F* End type: ANSI600/ ANSI900/ ANSI1500* Working pressure: TFM/ TFM4215 seat:ANSI600 PEEK/DELRIN seat: ANSI900/ ANSI1500* For ANSI 1500: 1/2"~1-1/4", 3600 psi 1-1/2" & 2", 3000 psi
SPECIFICATION
* Automation application* Cavity f i l ler * Hastelloy C, Alloy 20, Super Duplex, Monel * Fire safe design
OPTION
2424
2525
GG
FF
d2d2
d1d1
¡¼¡¼HH
Manufacturer of Valves
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5- / Fax : 886-5-221-7018
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net
220-9374
2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.3
35
43
51
73
92
14.2
15.8
17.5
22.4
25.4
4
4
4
4
8
16
19
19
22
19
66.5
82.6
88.9
114.3
127
95.3
117.3
124
155.5
165
G T M NC D
CLASS 600
1/2"
3/4"
1"
1 1/2"
2"
SIZE
35
43
51
73
92
22.4
25.4
28.5
31.8
38.1
4
4
4
4
8
22
22
25.5
28.5
25.5
82.6
88.9
101.6
124
165.1
120.7
130
149.5
177.8
216
G T M NC D
CLASS 900/ 1500
1/2"
3/4"
1"
1 1/2"
2"
SIZE
MATERIALS LIST, 1/2" to 2"
CF8M/ WCB
SS 316
SS 304
SEAT
STEM PACKING
GASKET
THRUST WASHER
BALL
GLAND
STEM
9
10
11
12
5
2
6
3
7
4
8
MATERIALSPART NAMEITEM
CF8M/ WCB
FLANGE END
1
NUT STOP
13
SS 30414
SS 304
SS 304
SET BOLT
15
16
17
18
19BODY
PLATE STOPPER
LEVER HEAD
TFM/ DELRIN/ PEEK
TFM/ GRAPHITE
SS 316
PEEK
SS 304
20
21
22
SS 304END BOLT
TRUNNION PIN
STEM BUSHING
DISK WASHER
STEM NUT
LEVER
TRUNNION BUSHING
GASKET
23
24
SS 316
TFM/ GRAPHITE
DELRIN/ PEEK
SS 301
SS 304
SS 304/ CS
TFM/ GRAPHITE
DELRIN/ PEEK
25
26 SS 304HANDLE
SS 304
27 HANDLE NUT SS304
STOP PIN
BLANK CAP CF8M/ WCB
TRUNNION CAP BOLT SS 304
TRUNNION CAP CF8M/ WCB
513F ball valve is available for 180 operation. This design will allow more flow patterns to be use in your pipe works. Customer just have to change a 180 stop plate for this option.
180 stop plate
FLOW PATTERN
L3-90
21
ZP
T3-90
T4-90
ZP
1 2
1 2
ZP
21
ZP
21
T5-90
T6-90
3-WAY
L5-180
T5-180
X-90
ZP
ZP
1
ZP
ZP
1
ZP
ZP
1 2
ZP
1
ZP
2
I-90
4-WAY
T-port 90 operation can be suitable for 4-way valve.
(T3/ T4/ T5/ T6)
ZP
ZP
ZP
ZP
ZP
ZP
2
2
STANDARD
STANDARD
210
248
273
343
375
L
216
255
281
355
395
L
Manufacturer of Valves
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5- / Fax : 886-5-221-7018
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net
220-9374
2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.4
PEEK (450G)DELRIN
TEMPERATURE ( )
0 100 200 300 400 500
PR
ES
SU
RE
(P
.S.I
.)
-20
1000
800
600
400
200
2200
2000
1800
1600
1400
1200
600
3000
2800
2600
2400
3400
3200
0
Delrin1/4"~1"
Delrin1-1/4"~2"
3600
TFM1600
TFM1/4"~1"
TFM1-1/4"~2"
PEEK1/4"~1"
PEEK1-1/4"~2"
PRESSURE/ TEMPERATURE
(1"~2"o nly)
(1/2"~3/4" only)
BodyBody
SeatSeat
GasketGasket
SeatSeat
GasketGasketBlank capBlank cap
BallBall
StemStem
Thrust washerThrust washer
Trunnion pinTrunnion pin
Trunnion bushingTrunnion bushing
Trunnion capTrunnion cap
GasketGasket
BoltsBolts
SeatSeat
GasketGasket
Flange endFlange endEnd boltsEnd bolts
SeatSeat
GasketGasket
Stop pinStop pin
NutNut
Set BoltSet Bolt
Lever headLever head
LeverLever
Stem packingStem packing
Stem bushingStem bushing
GlandGland
Disk washerDisk washer
Stem nutStem nut
Nut stopNut stop
Space washerSpace washer
HandleHandle
Handle nutHandle nut
End nutEnd nut
Flange endFlange end
End boltsEnd bolts
End nutEnd nut
End nutEnd nut
End boltsEnd bolts
Flange endFlange end
End nutEnd nut
End boltsEnd bolts
StopperStopper
ISO direct mount for actuator assembling directly.
* Pneumatic (DA or SR)/ Electric actuator
* Solenoid valve/ Limit Switch Box/ EP
TFM42151/4"~1"
TFM42151-1/4"~2"
TFM4215
Manufacturer of Valves
No.9, Chen Kong 2 St., Minhsiung Industrial Park, Chia-Yi, Taiwan, R.O.C.
Tel : 886-5- / Fax : 886-5-221-7018
http://www.zipson.com.tw E-mail: loogoon@ms22.hinet.net
220-9374
2006 ZIPSON ALL RIGHTS RESERVED
Manufacturer of Valves
513F, 3/4-Way High Pressure Ball Valve P.5
Suggestion!
1. As dismantle the ball valve, don't forget to replace new Repair Kits, especially the gasket to prevent from leaking.
2. Before welding the valves, make sure the ends were dismantled. And welding the dismantled ends. After all the ends be cool, assemble the ends & use new gasket to prevent from leaking.
BREAK-TORQUE VALUE (Nm)
Note 1: The greases ZIPSON use including lubricant & anti-seize grease are both SILICONE-FREE. Note 2: Strongly suggest increasing at least 30%~40% for safety factor for mounting actuator.
1/2" 1" 1-1/4"SIZE
GREASE
NON-GREASE 77
1-1/2" 2"
88 132
121 187
27.5
35.2
55
3/4"
-
-
AT 3000 PSI 93.5 198 34144 -
45.6
62.2
76.8
513F, multi-way ball valve can be with cavity filler in internal body to fill the inner cavity. This may keep the body cavity clean and easy to cleanse. The cavity filler will keep the ball operation from sticking for glue-like media.
top related