manual links (ecoflow) - rs components...
Post on 07-Apr-2018
230 Views
Preview:
TRANSCRIPT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–1
4-4
4-10
4-6
4-8
4-9
4-11
4-12
4-13
4-14
4-15
4-16
4-17
4-18
4-19
4-20
4-22
3842538281(2007.11)
Manual links
Manual links (EcoFlow)
EcoFlow: custom conveyor tracks
EcoFlow: lateral guides
EcoFlow: conveyor track components
EcoFlow: roller carriers
EcoFlow: roller mounts
EcoFlow: rollers
EcoFlow: protective covers, brakes
EcoFlow: flexible bridges
EcoFlow: curved sections (kit)
Corner table tops
Corner base for table tops
EcoFlow: ball rollers
EcoFlow: stops
EcoFlow: corner pieces, transverse conveyors
EcoFlow: stop gates
EcoFlow: workpiece pallets
Bosch Rexroth AG MPS 3.04–2
00126506
Manual links
3842538281(2007.11)
You can use our EcoFlow for building
material flow systems to link
manual workstations, as well as in
storage and consignment areas.
Using EcoFlow, materials in the most
diverse containers, such as blisters and
small parts containers, can be supplied
directly to the workstation or via a
supermarket shelf ( 3-10).
Using custom conveyor tracks, you can
e.g. individually link workstations. Here,
you define the necessary track width, as
well as the conveyor medium suitable for
your application.
Complete workpiece pallets are available
to transport workpieces.
Supplementary accessories can be used
to flexibly extend flow rack systems and
conveyor tracks.
EcoFlow components
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–3
00111642
00118563
3842538281(2007.11)
Manual links
Bosch Rexroth AG MPS 3.04–4
10
00127301
( 6-15)
Nr./No./No
3 842 998 258
00125091
TM
L
16
28
18
16
20+3
36 16
TM G L
[mm] [%] [mm]
1000 0 962.0
1000 6 961.7
1000 10 963.5
00127232
R
BF=b+5
SFFM
S(=1)
b
00127295
S = 0
S = 1
S = 2
Manual links
3842538281(2007.11)
EcoFlow: conveyor tracks, rail holders
Conveyor track based on aluminum
profiles with uniform rollers made of
plastic, steel, or stainless steel. For very
high conveyor track loads. Conveyor
tracks are suspended simply and
securely on the single or double tubular
cross tie with a rail holder. Rexroth
recommends a gradient of G = 6%.
Accessories: brake ( 4-12), tube clip
( 3-62)
Ordering parameters for 3 842 998 258
A (0 = kit, 1 = assembled)________________________ =… (0, 1)
ESD(0 = no, 1 = yes)______________________________ =… (0, 1)
TM Horizontal distance of cross tie center ____________ = … (355–6000) mm
G Gradient _____________________________________ = … (0–10)%
FM Conveyor medium _____________________________ = … (K, S, E) 1) ( 4-11)
(K = plastic, S = steel, E = stainless steel)
BF Conveyor track width __________________________ = … (200–1000) mm 2) ( 6-15)
S Rail holder design _____________________________ = … (0, 1, 2)
SF Lateral guide (0 = no, 1 = yes) __________________ =… (0, 1) ( 3-37)
R Roller distance (0 = 50 mm, 1 = 100 mm)_________ =… (0, 1)
Conveyor track EcoFlow with rail holder
1) (FM = K, E) not with (ESD = 1)2) For (FM = K), BF = 200 - 600 mm applies
Material no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–5
00127279
10
( 6-15)
00125092
L28
3 842 998 278
00127231
BF = b+5
b
SFFM
S(=1)
R
00127294
S = 0
S = 1
S = 2
00127233
100 (R = 1)
50 (R=0)
BG=1 BG=0
3842538281(2007.11)
Manual links
Material no.
EcoFlow: conveyor tracks, stop plates
Ordering parameters for 3 842 998 278
A (0 = kit, 1 = assembled)________________________ =… (0, 1)
ESD(0 = no, 1 = yes)______________________________ =… (0, 1)
L Conveyor track length__________________________ = … (355–6000) mm
FM Conveyor medium _____________________________ = … (K, S, E) 1) ( 4-11)
(K = plastic, S = steel, E = stainless steel)
BF Conveyor track width __________________________ = … (200–1000) mm 2) ( 6-15)
S Stop plate design _____________________________ = … (0, 1, 2)
SF Lateral guide (0 = no, 1 = yes) __________________ =… (0, 1) 3) ( 3-37)
R Roller distance (0 = 50 mm, 1 = 100 mm)_________ =… (0, 1)
BG Slide rail border (0 = outside, 1 = inside)__________ =… (0, 1)
Conveyor track EcoFlow with stop plate
1) (FM = K, E) not with (ESD = 1)2) For (FM = K), BF = 200 - 600 mm applies3) (SF = 1) only with (BG = 0)
Conveyor track based on aluminum
profiles with uniform rollers made of
plastic, steel, or stainless steel. For very
high conveyor track loads. In conveyor
tracks with stop plates, the U-profile is
fastened via the 10 mm groove on the
underside of the profile, e.g. on other
profiles using brackets, or on tubular
cross ties using tube clips.
Accessories: brake ( 4-12), tube clip
( 3-62), holder for double round tube
( 3-62)
Bosch Rexroth AG MPS 3.04–6
00111632 00111697
810
00109772
39
A, B 4520
50
00109773
22,5
45
C
45
10
1822ø5
,5
10
10
8
A 10 3 842 525 443
B 10 3 842 526 034
L = 3000 mm
LE
C 1 3 842 993 029/…
30 mm L 6070 mm
C 20 3 842 537 321
L = 6070 mmA 1 3 842 993 511
B 1 3 842 993 512
30 mm L 3000 mm
00120100
45 4
50
D
D 20 3 842 525 457
Manual links
3842538281(2007.11)
EcoFlow: conveyor track components
For fast, simple construction of conveyor
tracks or manual slide sections.
Material:
A PVC, gray
B PVC, black, conductive to 106
(DIN EN 61 340-5-1)
C Aluminum, natural, anodized
D PA, black
EcoFlow guide profiles EcoFlow section profiles
Material no. Material no.
Cap
Material no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–7
3 842 537 593
3 842 537 5922020
00127152
84
3922,5
22
65
80
18
+2x
00127153
45,3
50
1822
+2x
3 842 537 664
3 842 537 6652020
00127158
28
60
92
50
24
80
(1x)
(1x)
1000127159
28
60
92
50
24
50
(1x)
(1x)
10
00127154
00127156
3842538281(2007.11)
Manual links
Stop plate with stop Stop plate without stop
Rail holder with stop Rail holder without stop
Material no. Material no.
Material no. Material no.
Bosch Rexroth AG MPS 3.04–8
00111634
10
00123926
40
2
00109774
16
5x50 = 250 2525
8
300
10 3 842 535 683
Manual links
3842538281(2007.11)
EcoFlow: roller carriers
For fast, simple construction of conveyor
tracks when combined with section and
guide profiles ( 4-6). The elements
are joined by means of interlocking
connections.
Material: ABS, black, conductive to 106
(DIN EN 61 340-5-1).
EcoFlow roller carrier
Material no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–9
00111644
8 10
00123928
9
50
8
8
10
2 7 3
10
DIN 7984
M6x16: + 1x/ LE 1
10
00123927
9
50
8
8
10
2 7 3
DIN 7984
M6x128
: + 1x/ LE 1
8
10 3 842 535 667
10 3 842 535 668
8 10
00109811
EL
EL + 21
EL
EL + 21
3842538281(2007.11)
Manual links
EcoFlow: roller mounts
For fast, simple construction of conveyor
tracks when combined with strut profiles
e.g. 45x45L.
The roller mount can be inserted
easily and makes it possible to replace
individual rollers without disassembling
the whole frame.
Material: PA, black
EcoFlow roller mount EcoFlow roller mount
Material no. Material no.
Bosch Rexroth AG MPS 3.04–10
00120045
410
0
30
80
(2x)(2x)
3 842 998 315
10
00125071
202 3 842 535 125
3 842 992 473 / …
30 mm L 3000
20 3 842 537 594
LE
10 3 842 513 576
L = 2000 mm
00109273
X
19
,5
22
,5
15
13
Y
00127182
7
3
15
22,5
00125091
TM
L
16
28
18
16
20+3
36 16
( 6-15)
Manual links
3842538281(2007.11)
EcoFlow: lateral guides
Lateral guides in variable lengths for
installation on the conveyor tracks are
available to securely transport your
products. The lateral guide can be
adjusted horizontally and vertically.
Material no.
Material no. Material no. Material no.
Material no.
Ordering parameters for 3 842 998 315
TM Horizontal distance of cross tie center ____________ = … (355-6000) mm
G Gradient _____________________________________ = … (0-10) %
Lateral guide EcoFlow
Mounting bracketProfile 15x22.5 Cap
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–11
00111635
00124716
F
408
EL
b -73
EL = b-75
EL = b+3
b +5
b +5
b +5
EL - 5
b
1, 2, 3
F
F [N] EL [mm]
500 225 3 842 525 737
325 3 842 525 738
425 3 842 525 739
525 3 842 537 163
150 225 3 842 525 740
325 3 842 525 741
425 3 842 525 742
525 3 842 537 164
F [N]
500 3 842 994 988
F [N]
150 3 842 994 989
F [N]
150 3 842 995 008
3842538281(2007.11)
Manual links
EcoFlow: rollers
In the section profile, the rollers are
inserted in roller carriers ( 4-8); in
strut profiles, they are inserted with roller
mounts ( 4-9).
Steel rollers combined with conductive
conveyor track components are suited
for use in ESD-conductive systems.
Ordering parameters for 3 842 994 988
EL Roller length_______________________________ = … (105–1005) mm
Material no.
EcoFlow rollers, standard
Ordering parameters for 3 842 994 989
EL Roller length_______________________________ = … (105–605) mm
Roller: steel, galvanized
Material no.
Roller: plastic
Material no.
Roller: stainless steel
Material no. Ordering parameters for 3 842 995 008
EL Roller length_______________________________ = … (105–1005) mm
Steel, galvanized
Plastic
Bosch Rexroth AG MPS 3.04–12
00127147
250
80
120
5,9
28
49
(4x)
(4x)
(2x)
00127148
250
80
120
5,9
44,5
28
(4x)
(4x)
(2x)
Set 3 842 537 583
Set 3 842 537 584
00127149
200
20
20 3 842 537 740
00127150
Manual links
3842538281(2007.11)
EcoFlow: protective covers, brakes
A protective cover can be mounted to
shield the border of the slide rails when
loading the conveyor tracks.
The brake is clipped over the rollers and
gently brakes containers.
Protective cover scope of delivery: 2 protec-
tive covers each incl. fastening material
Protective cover and brake material: steel,
galvanized
Outer slide rail protective cover (BG = 0) Inner slide rail protective cover (BG = 1) Brake EcoFlow
Material no. Material no. Material no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–13
00127145
10460
51,8102
50
30
,5
(1x)
(1x)
20 3 842 537 950
00127146a
3842538281(2007.11)
Manual links
Flexible bridge
Flexible bridge for ergonomic supply
of containers in the flow rack system
or at the workstation. The container
is stopped at the flexible bridge and
manually moved into an ergonomic
removal position.
Large bracket a:
– Max. 40° from horizontal position with
tubular cross tie
– Max. 30° from horizontal position with
double tubular cross tie
Flexible bridge material: steel, galvanized
Accessories: lift aid ( 3-44)
Material no.
EcoFlow: flexible bridges
Bosch Rexroth AG MPS 3.04–14
00109785
b + 5
b
4- 22
00111177
( 5 x 20 )20 x 22 x
3 842 525 756
Manual links
3842538281(2007.11)
EcoFlow: curved sections (kit)
Assembly kit for easy mounting of a
curved section on a corner table top.
For roller length EL [mm] = 325, 425,
525
Scope of delivery:
– Inner and outer guide with fastening
screws
– 20 ball rollers
– Drilling template to aid with assembly
Components required for constructing a
curve:
– Curved section assembly kit
– Corner table top ( 4-15)
Curve belt material: stainless steel
In combination with volume-conductive table top.
EcoFlow curved section (kit)
Material no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–15
3 842 521 675
3 842 537 247
00121075
485
40
895
555
4x
4x
00121075
485
40
895
555
4x
4x
3842538281(2007.11)
Manual links
Corner table tops
Economic
Suitable for use with normal mechanical
strain on the table top surface.
Material: coated chipboard, layer thickness
0.1 mm
Color: light gray, RAL 7035
Edge protector material: ABS
Basic ESD
Suitable for use with high mechanical
strain on the table top surface.
Material: coated chipboard with volume-con-
ductive material, layer thickness 0.8 mm.
Specific resistance RV
= 1 x 105 – 1 x 107
(DIN EN 61 340-5-1)
Color: light gray RAL 7035
Edge protector material: ABS
Material no.
Material no.
Economic
Basic ESD
Bosch Rexroth AG MPS 3.04–16
00123910
h
[mm]
A 900 1x 3 842 992 426 / 850 mm MGE
1000 1x 3 842 992 426 / 950 mm MGE
B 1x 3 842 352 061 MGE
C 1x 3 842 523 442 MGE
D 1x 3 842 502 674 MGE
E 4x 3 842 992 425 / 900 mm MGE
F 1x 3 842 521 677
G 6x 3 842 535 571 MGE
H 6x 3 842 523 561 MGEE-Mail: mps.rexroth@boschrexroth.de
Tel: +49 (0)711/811-30698
Fax: +49 (0)711/811-30364
00121458
F = 1000 Nmax F = 1500 Nmax
900
b + 17
D
B, C
G
E
A
G G
G
F
G G
H
H
900
900
00109798
Manual links
3842538281(2007.11)
Corner bases for table tops – application example
You can use Rexroth strut profiles to
tailor corner bases for table tops to your
needs. Detailed information on strut
profiles can be found in the “Basic
Mechanical Elements catalog"
(3 842 529 114) ( 14-11).
Material no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–17
00127203
3 842 525 74800109786
ø24
11,5 2
1
9,5
ø31
ø15
,8
F = 500 N
F
3842538281(2007.11)
Manual links
EcoFlow: ball rollers
Ball rollers are required to build curves
( 4-14). If a volume-conductive
(ESD) table top ( 4-15) is used,
the curves are also suitable for ESD-
conductive systems.
Housing material: steel, galvanized
Ball material: stainless steel
EcoFlow ball roller
Material no.
Bosch Rexroth AG MPS 3.04–18
00111633
00109781
M6
10
Set 3 842 536 057
00120872
M6
2x
Manual links
3842538281(2007.11)
EcoFlow: stops
The stop with rubber buffer for the
EcoFlow section profile ( 4-6) brings
the workpiece pallet to a gentle halt.
Material: aluminum, natural,
anodized/PUR
EcoFlow stop
Material no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–19
00121072
10
M8x25
4x
2x
A
8 10
A Set 3 842 536 056 B Set 3 842 536 055
00120876
8
M6x258x
4x
B
00109788
A
Bb + 82
100
50
32
b + 5
100
3842538281(2007.11)
Manual links
EcoFlow: corner pieces, transverse conveyors
For connecting adjacent 90 degree
transfer sections. The sections are
fastened at the same level.
Corner piece material: A: PA, black,
conductive to 106
Transverse conveyor material: B: steel,
galvanized
EcoFlow corner piece EcoFlow transverse conveyor
Material no. Material no.
Bosch Rexroth AG MPS 3.04–20
00127265
b + 5A
b
B
00109784
.... x 50 .... x 50100100.... x 50
F =
2500Nmax
AB
F25 25
3 842 995 007
3 842 995 017
Manual links
3842538281(2007.11)
EcoFlow: custom stop gates
Use the stop gate (A) and return
stop (B) to position workpiece pallets at
the workstation. Sufficient leg room must
be taken into consideration if a stop gate
and return stop are used. The stop gate
and return stop require 45 mm more
space below the bottom.
Ordering parameters for 3 842 995 007
EL Roller length_______________________________ = … (105–1005) mm
Stop gate incl. manual pushbutton
Material no.
Ordering parameters for 3 842 995 017
EL Roller length_______________________________ = … (105–1005) mm
Return stop
Material nr.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Bosch Rexroth AGMPS 3.0 4–21
00127265
b + 5A
b
B
00109784
.... x 50 .... x 50100100.... x 50
F =
2500Nmax
AB
F25 25
E-Mail: mps.rexroth@boschrexroth.de
Tel.: +49 (0)711/811-30698
Fax: +49 (0)711/811-30364
b
[mm]
A 300 3 842 537 894
400 3 842 537 895
500 3 842 537 896
600 3 842 537 897
b
[mm]
B 300 3 842 537 898
400 3 842 537 899
500 3 842 537 900
600 3 842 537 901
3842538281(2007.11)
Manual links
EcoFlow: stop gates/return stops
Use the stop gate (A) and return
stop (B) to position workpiece pallets at
the workstation.
Further section widths available on request
EcoFlow stop gate incl. manual pushbutton
Material no.
EcoFlow return stop
Material no.
Bosch Rexroth AG MPS 3.04–22
Set 3 842 536 054
00109796
b
b - 26
b + 5
00111181
00120877
16,5
3 1021
76
3
16,510
76
16 -
22
5x16
5
R26
+12x
4x
Manual links
3842538281(2007.11)
EcoFlow: workpiece pallet corner pieces
Produce workpiece pallets from the most
diverse materials quickly and simply.
The corner pieces offer the following
functions:
– Isolation of parts from a pallet queue
– Well-defined guidance and stopping
surfaces
– Good transition through curves
– Avoidance of edges where trapping
may occur
– A prerequisite in order for the stop
gate, return stop, curved section, and
transverse conveyor to function well.
Material: PA, black, conductive to 106
(DIN EN 61 340-5-1).
EcoFlow workpiece pallet corner pieces
Material no.
top related