manifold design with mdtools 740 what's new

Manifold Design

MDTools®

740 with

What’s New

IndexMDTools® 740 What’s New

” Power-to-Design” manifolds

1

2

3

4

5

6

7

8

9

10

11

Configure Machining Sequence for Slots

Add or Remove Material

Request a Manifold Quote

1

2

3

Sink Merged Orifice Plug

Configure and Create Cavity List

Switch between Angle of Projection and Reset Face Origin

Configure Net Names

Configure Component and Port List

Comments included in MDTools Cavity Library

Merge Orifice Plug to Cavity

Convert O-Ring Grooves to Feature

Insert Undercut

Stretch Cavity Step in Edit Cavity Window

Export and Import O-Ring Grooves

ENHANCEDNEW

Add or Remove Material

Add or Remove Material

Add or remove material from any selected section of the manifold

Insert Undercut

Insert Undercut

Insert an undercut at the selected port of a cavity

Configure the Machining sequence for the undercut

Define Machining Sequence for Slots

Configure Machining Sequence for Slots

Specify machining details for slots

Export and Import O-Rings

Export and Import O-Ring Grooves

O-Ring Grooves can be exported and imported through an XML file

Merge Orifice Plug to Cavity

Merge Orifice Plug to Cavity

Merge an orifice plug with the cavity and update its machining sequence

Sink Merged Orifice Plug

Sink Merged Orifice Plug

Sink the merged orifice plug in a cavity as per the specified depth with respect to the step above the orifice plug

Convert O-Rings to Feature

Convert O-Ring Grooves to Feature

O-Ring Grooves can be converted from Virtual to Feature or vice versa

Manifold Quote

Request a Manifold Quote

Get a manifold quote from a registered manifold manufacturer

Add Net Names

Configure Net Names

Add a new net name and assign a color to it

Configure and Create Cavity List

Configure and Create Cavity List

List all features in a manifold including slots, undercuts, and o-rings grooves

Configure columns and headers of Cavity List

Configure Column Header Names of Component and Port List

Configure Component and Port List

Configure Column Headers and Title

Stretch Cavity

Stretch Cavity Step In Edit Cavity Window

Stretch the step where the top port is located for all the 2 and 3 port cavities, if required

Cavity Comments from MDTools Cavity Library

Comments included in MDTools Cavity Library

The comments specified for each cavity in the MDTools Cavity library is now available inside MDTools, along with each cavity in Edit All Cavity Parameters

Switch between Angle of Projections and Reset the Face Origin

Switch between Angle of Projection and Reset Face Origin

Switch between the First and Third Angle of projection using the Auto Dimension > Set Face Origin window

The Reset button enables restoration of the default Face Origin

Contact Us

Contact VEST

MDTools® 740 Evaluation Software

Call: +01 (248) 649 9550

Fax: +01 (248) 649 9560

Email: sales@VESTusa.com

support@VESTusa.com

Visit: www.VESTusa.com

Enhance your productivity and competitive edge

with MDTools®