mait gama completa foreze
Post on 14-Oct-2015
28 Views
Preview:
TRANSCRIPT
-
HR
MAICAT
MINI
Series
HR 300-570
HR 180
HR 100
MAICAT45
MAICAT180 MAICAT230
MIDI DRILL MIDI DRILL
BABY DRILL
For more than 50 years, MAIT has been a world leading manufacturer of drilling machinery
and accessories for the foundation drilling industry.
MAIT is recognized by contractors for offering the highest quality, reliability, service and
simplicity.
MAIT manufactures a wide range of drilling machinery from large to small diameter drilling
rigs in order to meet our customers every need.
-
CFA
DIAPHRAGM WALLS
DRIVEN PILES
ApplicationsHR 180 MAICAT45 CFA24
HR 100 HR 260
HR 180
HR 800THH9
THH9
This catalogue represents MAITs drilling rigs range and the various applications that can
be utilized. MAIT also produces other types of construction equipment for drilling water
wells, cranes, micropiles, jet grouting, quarrying, soil investigation and tunnelling.
Furthermore MAIT is capable of providing various drilling tools like augers, buckets core
barrels, friction and interlocking kelly bars and accessories such as casing oscillators,
casing tubes, hydraulic grabs, hammers, vibrators, power packs and more.
-
HR 800The HR 800 is our biggest model, which has
been specially designed and built for carrying
out works requiring large bore diameters at
great depths. This one of a kind drilling rig
can be equipped with different rotarys with
different torque values depending on your job
requirements. The rotary can also be set up
with the MCS (MAIT Casing System) or torque
multiplier which can exert a maximum nominal
torque of 800 KNm for insertion and extraction
on the casing tubes up to a maximum diameter
of 3000 mm.
The HR 800 is not limited to the conventional
kelly bar drilling system, but it is able to utilize
Casing Oscillators, Continuous Flight Auger
(CFA), Diaphragm Walls by kelly bar system,
and Driven piles with hydraulic hammers. The
HR 800 is also available with a crowd winch
system (THD), which allows a longer stroke
along the length of the mast, therefore longer
casing sections may be used when drilling.
Working CharacteristicsWorks with Augers & Buckets:Max diameter 3.000 mm 9.5 ftMax diameter with casings 3.000 mm 9.5 ftDepths 40 - 50 - 60 - 80 - 100 m 131 -164 - 197 - 263 - 328 ftWorks with CFA:Max diameter 1.500 mm 5 ftDepths 35 m 115 ftCasing Oscillator:Max. diameter 2.500 mm 8 ftDiaphragm Walling:Max size 1.200 x 3.000 mm 4 x 9.5 ftDepths 30 - 50 m 98.5 - 164 ft
CP version
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical Data
Rotary:Nominal torque available 280 - 360 - 420 KNm 202,524 - 260,388 - 303,786 ftlbsNominal torque with MCS 800* KNm 578,640* ftlbsRotary nominal pulldown/pullback 400 KN 90,000 lbsUnloading speed 130 rpmRotary stroke 7.000 mm 23 ftWinches:Main winch nominal pullback 25.000 / 30.000 daN 56,200 / 67,500 lbsAuxillary winch nominal pullback 10.000 / 12.000 / 18.000 daN 22,500 / 27,000 / 40,500 lbsDiesel Engine: CATERPILLAR C15 ACERT Power 403 KW @ 2.100 rpm 540 HP @ 2,100 rpmHydraulic Installation: 6 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 600 liters 159 galExpandable Crawlers:Length 6.400 mm 21 ftWidth 3.500 - 5.100 mm 11.5 ft - 17 ftShoes 1.000 mm 3.3 ftApprox. Weight: 135 tons 297,700 lbs
CP version
* for casing
-
HR 800
Working CharacteristicsWorks with Augers & Buckets:Max diameter 3.000 mm 9.5 ftMax diameter with casings 2.600 mm 8.5 ftDepths 40 - 50 - 60 - 80 - 100 m 131 -164 - 197 - 263 - 328 ftWorks with CFA:Max diameter 1.500 mm 5 ftDepths 35 m 115 ftCasing Oscillator:Max. diameter 2.500 mm 8 ftDiaphragm Walling:Max size 1.200 x 3.000 mm 4 x 9.5 ftDepths 30 - 50 m 98.5 - 164 ft
THD version
The HR 800 is our biggest model, which has
been specially designed and built for carrying
out works with large bore diameters at great
depths. The THD system (crowd winch) allows
drilling with larger casing lengths underneath
the rotary as the winch provides a longer stroke
as the rotary can be raised higher on the mast.
This one of a kind drilling rig can be equipped
with different rotarys with different torque values
depending on your job requirements. The rotary
can also be set up with the MCS (MAIT Casing
System) or torque multiplier which can exert
a maximum nominal torque of 800 KNm for
insertion and extraction on the casing tubes up
to a maximum diameter of 3000 mm.
The HR 800 is not limited to using the kelly bar
drilling system, but it is also able to utilize Casing
Oscillators, Continuous Flight Auger (CFA),
Diaphragm Walls by kelly system, and Driven
piles with hydraulic hammers. Depending on
your requirements, The HR 800 is also available
with a pulldown cylinder system (CP).
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical Data
Rotary:Nominal torque available 280 - 360 - 420 KNm 202,524 - 260,388 - 303,786 ftlbsNominal torque with MCS 800* KNm 578,640* ftlbsRotary nominal pulldown/pullback 400 KN 90,000 lbsUnloading speed 130 rpmRotary stroke 12.500 / 19.500 mm 41 / 64 ftWinches:Main winch nominal pullback 25.000 / 30.000 daN 56,200 / 67,500 lbsAuxillary winch nominal pullback 10.000 / 12.000 / 18.000 daN 22,500 / 27,000 / 40,500 lbsDiesel Engine: CATERPILLAR C15 ACERT Power 403 KW @ 2.100 rpm 540 HP @ 2,100 rpmHydraulic Installation: 6 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 600 liters 159 galExpandable Crawlers:Length 6.400 mm 21 ftWidth 3.500 - 5.100 mm 11.5 ft - 17 ftShoes 1.000 mm 3.3 ftApprox. Weight: 135 tons 297,700 lbs
THD version
* for casing
-
HR 300-570The HR 300-570 is a drilling rig of great dimensions, weighing approximately 90-95 tons. It has been purposely designed without mast articulation in order so the mast is stable and can withstand the high torque of the MCS system (Torque multiplier system exclusively available from MAIT). According to your requirements, this rig can be fitted with either a rotary with 233 kNm nominal torque or 270 kNm nominal torque. The HR 300-570 rig succeeds in inserting and extracting casings with a daily 30 % productive increment thanks to the torque multiplier. The MCS system has 57.000 kgm exercised torque from the rotary directly to the casing.
This drilling rig is available in two versions; the difference of each version is indicated by the pull-down system that moves the rotary:
CP version: standard version with pull-down cylinder.
THD version: with crowd winch.
This rig is ideal for every type of drilling in which the operation of casing tubes is very frequent, or a daily constant;- Drilling very deep and large diameters for Bored Piles, Casing Oscillators, and Continuous Flight Auger;- Drilling in rocky terrains or hard soil;- Drilling Omega piles or Soil Displacement Auger piles (SDA);- Diaphragm Walls- Driven piles with hydraulic hammers
Working CharacteristicsWorks with Augers & Buckets:Max diameter 2.500 mm 8 ftMax diameter with casings 2.300 mm 7.5 ftDepths 40 - 50 - 60 - 80 m 131 -164 - 197 - 263 ftWorks with CFA:Max diameter 1.200 mm 4 ftMax depths 32 m 105 ftCasing Oscillator:Max. diameter 1.600 mm 5.2 ftDiaphragm Walling:Max size 1.200 x 2.500 mm 4 x 8 ftDepths 30 - 50 m 98.5 - 164 ftJet GroutingMax depth 32 m 105 ft
CP version
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque available 233 - 270 KNm 168,529 - 195,291 lbsftNominal torque with MCS 570* KNm 412,281* lbsftRotary nominal pulldown / pullback 300 KN 67,500 lbsUnloading speed 150 rpmRotary stroke 6.500 mm 21.5 ftWinches:Main winch nominal pullback 20.000 / 25.000** daN 45,000 / 56,200** lbsAuxillary winch nominal pullback 8.000 / 12.000** / 18.000** daN 18,000 / 27,000** / 40,500** lbsDiesel Engine: CATERPILLAR C15 ACERT Power 403 KW @ 2.100 rpm 540 HP @ 2,100 rpmHydraulic Installation 6 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 580 liters 153 galExpandable Crawlers:Length 5.900 mm 19.3 ftWidth 3.000 - 4.500 mm 9.5 ft - 15 ftShoes 900 mm 3 ftApprox. Weight: 85 - 95 tons 187,500 - 209,380 lbs
CP version
* for casing** on request
-
HR 300-570The HR 300-570 is a drilling rig of great dimensions, weighing approximately 90-95 tons. It has been purposely designed without mast articulation in order so the mast is stable and can withstand the high torque of the MCS system (Torque multiplier system exclusively available from MAIT). According to your requirements, this rig can be fitted with either a rotary with 233 kNm nominal torque or 270 kNm nominal torque. The HR 300-570 rig succeeds in inserting and extracting casings with a daily 30 % productive increment thanks to the torque multiplier. The MCS system has 57.000 kgm exercised torque from the rotary directly to the casing.
This drilling rig is available in two versions; the difference of each version is indicated by the pull-down system that moves the rotary:
CP version: standard version with pull-down cylinder.
THD version: with crowd winch.
This rig is ideal for every type of drilling in which the operation of casing tubes is very frequent, or a daily constant;- Drilling very deep and large diameters for Bored Piles, Casing Oscillators, and Continuous Flight Auger;- Drilling in rocky terrains or hard soil;- Drilling Omega piles or Soil Displacement Auger piles (SDA);- Diaphragm Walls- Driven piles with hydraulic hammers
Working CharacteristicsWorks with Augers & Buckets:Max diameter 2.300 mm 7.5 ftMax diameter with casings 2.100 mm 7 ftDepths 40 - 50 - 60 - 80 m 131 -164 - 197 - 263 ftWorks with CFA:Max diameter 1.200 mm 4 ftMax depths 32 m 105 ftCasing Oscillator:Max. diameter 1.600 mm 5.2 ftDiaphragm Walling:Max size 1.200 x 2.500 mm 4 x 8 ftDepths 30 - 50 m 98.5 - 164 ftJet GroutingMax depth 32 m 105 ft
THD version
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque available 233 - 270 KNm 168,529 - 195,291 lbsftNominal torque with MCS 570* KNm 412,281* lbsftRotary nominal pulldown / pullback 300 KN 67,500 lbsUnloading speed 150 rpmRotary stroke 14.000 mm 46 ftWinches:Main winch nominal pullback 20.000 / 25.000** daN 45,000 / 56,200** lbsAuxillary winch nominal pullback 8.000 / 12.000** / 18.000** daN 18,000 / 27,000** / 40,500** lbsDiesel Engine: CATERPILLAR C15 ACERT Power 403 KW @ 2.100 rpm 540 HP @ 2,100 rpmHydraulic Installation 6 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 580 liters 153 galExpandable Crawlers:Length 5.900 mm 19.3 ftWidth 3.000 - 4.500 mm 9.5 ft - 15 ftShoes 900 mm 3 ftApprox. Weight: 85 - 95 tons 187,500 - 209,380 lbs
THD version
* for casing** on request
-
HR 260
Working CharacteristicsWorks with Augers & Buckets:Max diameter 2.600 mm 8.5 ftMax diameter with casings 2.300 mm 7.5 ftDepths 40 - 50 - 60 - 80 m 131 -164 - 197 - 263 ftWorks with CFA:Max diameter 1.200 mm 4 ftDepths 22 + 6 m 72 + 19.7 ftCasing Oscillator:Max. diameter 1.600 mm 5.2 ftDiaphragm Walling:Max size 1.200 x 2.500 mm 4 x 8 ftDepths 30 - 50 m 98.5 - 164 ft
CP version
The HR 260 is a self erecting, 75 ton drilling rig particularly suitable for drilling great diameters
using the kelly bar system and with casing tubes
directly with the rotary. The HR 260 is able to
perform the following applications:
- Drilling large diameters and great depths with
augers or buckets
- Execution of direct rotary drilling with casings
and casing oscillator
- Continuous Flight Auger (CFA) & Diaphragm
Walls
- Execution of Double Head drilling
The HR 260 is available in the following two
versions:
HR 260 CP the standard version, is equipped with a Pull-down Cylinder which exerts its force
on the rotary, and is principally utilized for drilling
large diameter bore holes. The rotary is able to
work with a stroke of 6.100 mm (20 ft) approx.
The HR 260 CP uses a parallelogram system
of articulation guaranteeing a notable range or
motion 1.000 mm (3.3 ft).
HR 260 THD available upon request, The THD system moves the rotary by utilizing a
crowd winch, allowing the rotary to be used
along a larger stroke of the mast, 10 m (33 ft)
approx. The THD version is particularly useful
for driving and extracting casing tubes directly
by the rotary, and without a doubt increasing
your daily productivity.
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 260 KNm 192,000 lbsft Rotary nominal pulldown 280 KN 63,000 lbsRotary nominal pullback 200 KN 45,000 lbsUnloading speed 140 rpmRotary stroke 6.100 mm 20 ftWinches:Main winch nominal pullback 240 KN 54,000 lbsAuxillary winch nominal pullback 80 / 120 / 180 KN 18,000 / 27,000 / 40,500 lbsDiesel Engine: CATERPILLAR C13 ACERTPower 328 KW 440 HPHydraulic Installation 4 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 430 liters 114 galExpandable Crawlers:Length 5.450 mm 18 ftWidth 3.000 - 4.300 mm 9.5 ft - 14 ftShoes 900 mm 3 ftApprox. Weight: 75 tons 165,000 lbs
CP version
-
HR 260The HR 260 is a self erecting, 75 ton drilling rig particularly suitable for drilling great diameters
using the kelly bar system and with casing tubes
directly with the rotary. The HR 260 is able to
perform the following applications:
- Drilling large diameters and great depths with
augers or buckets
- Execution of direct rotary drilling with casings
and casing oscillator
- Continuous Flight Auger (CFA) & Diaphragm
Walling
- Execution of Double Head drilling
- Driven piles with hydraulic hammers
The HR 260 is available in the following two
versions:
HR 260 CP the standard version, is equipped with a Pull-down Cylinder which exerts its force
on the rotary, and is principally utilized for drilling
large diameter bore holes. The rotary is able to
work with a stroke of 6.100 mm (20 ft) approx.
The HR 260 CP uses a parallelogram system
of articulation guaranteeing a notable range or
motion 1.000 mm (3.3 ft).
HR 260 THD available upon request, The THD system moves the rotary by utilizing a
crowd winch, allowing the rotary to be used
along a larger stroke of the mast, 10 m (33 ft)
approx. The THD version is particularly useful
for driving and extracting casing tubes directly
by the rotary, and without a doubt increasing
your daily productivity.
THD version
Working CharacteristicsWorks with Augers & Buckets:Max diameter 2.600 mm 8.5 ftMax diameter with casings 2.000 mm 6.5 ftDepths 40 - 50 - 60 - 80 m 131 -164 - 197 - 263 ftWorks with CFA:Max diameter 1.200 mm 4 ftDepths 22 + 6 m 72 + 19.7 ftCasing Oscillator:Max. diameter 1.600 mm 5.2 ftDiaphragm Walling:Max size 1.200 x 2.500 mm 4 x 8 ftDepths 30 - 50 m 98.5 - 164 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 260 KNm 192,000 lbsft Rotary nominal pulldown 200 KN 45,000 lbsRotary nominal pullback 200 KN 45,000 lbsUnloading speed 140 rpmRotary stroke 10.000 mm 33 ftWinches:Main winch nominal pullback 240 KN 54,000 lbsAuxillary winch nominal pullback 80 / 120 / 180 KN 18,000 / 27,000 / 40,500 lbsDiesel Engine: CATERPILLAR C13 ACERTPower 328 KW 440 HPHydraulic Installation 4 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 430 liters 114 galExpandable Crawlers:Length 5.450 mm 18 ftWidth 3.000 - 4.300 mm 9.5 ft - 14 ftShoes 900 mm 3 ftApprox. Weight: 75 tons 165,000 lbs
THD version
-
HR 180The HR 180, one of our most sold models,
because of its versatility, and it is easily
adaptable to many different applications such
as:
- Drilling with augers or buckets
- Execution of drilling casings directly with
rotary and by casing oscillator
- Continuous Flight Auger (CFA)
- Diaphragm Walls
- Execution of Double Head drilling
The HR 180 is available in two versions:
HR 180 CP the standard version, is equipped
with a Pull-down Cylinder which exerts its
force on the rotary, and is principally utilized for
drilling large diameter bore holes. The rotary
is able to work with a stroke of 5.100 m (17 ft)
approx. The HR 180 CP uses a parallelogram
system of articulation.
HR 180 THD available upon request, The
THD system moves the rotary by utilizing the
winch, allowing the rotary to be used along a
larger stroke of the mast, 10 m (33 ft) approx.
The THD version is particularly useful for
driving and extracting casing tubes directly by
the rotary, and without a doubt increasing your
daily productivity.
The HR 180 drilling rig base is already
predisposed for all the various works listed
above.
CP version
Working CharacteristicsWorks with Augers & Buckets:Max diameter 500 / 1.600 mm 1.6 / 5.2 ftWithout lower mast extension 2.000 mm 6.5 ftDepths 30 - 40 - 50 - 60 m 98.5 - 131 -164 - 197 ftCasing Oscillator:Max. diameter 1.600 mm 5.2 ftWorks with CFA:Max diameter 1.200 mm 4 ftDepths 19 + 5 m 62 + 16 ftDiaphragm Walling:Max size 1.000 x 2.500 mm 3.3 x 8 ftDepths 24 m 79 ftJet GroutingMax depth 32 m 105 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 233 KNm 168,500 lbsftRotary nominal pulldown 180 KN 40,500 lbsUnloading speed 150 rpmRotary stroke 5.100 mm 17 ftWinches:Main winch nominal pullback 180 KN 40,500 lbsAuxillary winch nominal pullback 80 KN 18,000 lbsDiesel Engine: CATERPILLAR C9 ACERTPower 242 KW 325 HPHydraulic Installation 5 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 430 liters 114 galExpandable Crawlers:Length 4.900 mm 16 ftWidth 3.000 - 4.300 mm 9.5 ft - 14 ftShoes 800 mm 2.6 ftApprox. Weight: 57-60 tons 128,600 - 132,500 lbs
CP version
-
HR 180THD version
Working CharacteristicsWorks with Augers & Buckets:Max diameter 500 / 1.600 mm 1.6 / 5.2 ftWithout lower mast extension 2.000 mm 6.5 ftDepths 30 - 40 - 50 - 60 m 98.5 - 131 -164 - 197 ftCasing Oscillator:Max. diameter 1.600 mm 5.2 ftWorks with CFA:Max diameter 1.200 mm 4 ftDepths 19 + 5 m 62 + 16 ftDiaphragm Walling:Max size 1.000 x 2.500 mm 3.3 x 8 ftDepths 24 m 79 ftJet GroutingMax depth 32 m 105 ft
TThe HR 180, one of our most sold models,
because of its versatility, and it is easily
adaptable to many different applications such
as:
- Drilling with augers or buckets
- Execution of drilling casings directly with
rotary and casing oscillator
- Continuous Flight Auger (CFA)
- Diaphragm Walling
- Execution of Double Head drilling
The HR 180 is available in two versions:
HR 180 CP the standard version, is equipped
with a Pull-down Cylinder which exerts its
force on the rotary, and is principally utilized for
drilling large diameter bore holes. The rotary
is able to work with a stroke of 5.100 m (17 ft)
approx. The HR 180 CP uses a parallelogram
system of articulation.
HR 180 THD available upon request, The
THD system moves the rotary by utilizing the
winch, allowing the rotary to be used along a
larger stroke of the mast, 10 m (33 ft) approx.
The THD version is particularly useful for
driving and extracting casing tubes directly by
the rotary, and without a doubt increasing your
daily productivity.
The HR 180 drilling rig base is already
predisposed for all the various works listed
above.
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 233 KNm 168,500 lbsftRotary nominal pulldown 180 KN 40,500 lbsUnloading speed 150 rpmRotary stroke 10.000 mm 33 ftWinches:Main winch nominal pullback 180 KN 40,500 lbsAuxillary winch nominal pullback 80 KN 18,000 lbsDiesel Engine: CATERPILLAR C9 ACERTPower 242 KW 325 HPHydraulic Installation 5 pumpsHydraulic oil tank 800 liters 211 galFuel Tank 430 liters 114 galExpandable Crawlers:Length 4.900 mm 16 ftWidth 3.000 - 4.300 mm 9.5 ft - 14 ftShoes 800 mm 2.6 ftApprox. Weight: 57-60 tons 128,600 - 132,500 lbs
THD version
-
HR 130The HR 130 is a powerful compact rig that does
not require disassembly for transporting from
job to job. It is able to drill large diameters with
augers and buckets, and can also be equipped
with diverse kits which allow to drill with
Continuous Flight Auger, Diaphragm walls,
Down the Hole Hammers, and even Casing
Oscillators.
The HR 130s particularly modular conception
provides 170 KNm torque, and is easily and
rapidly convertible depending on the drilling
requirements, allowing the operator to carry out
a wide variety of jobs which would otherwise
require the use of different and expensive
equipment. The HR 130 comes equipped with
electronic depth counter, automatic levelling
system, and air conditioning & heating system
in order to better accomodate the operator.
Working CharacteristicsWorks with Augers & Buckets:Max diameter 1.300 / 1.600* mm 4.3 / 5.2 ftWithout lower mast extension 1.800 mm 6 ftMax diameter with casings 1.300 mm 4.3 ftDepths 30 - 40 - 48 m 98.5 - 131 -157.5 ftWorks with CFA:Max diameter 800 mm 2.6 ftDepths 14 + 5 m 45 + 16.5 ftCasing Oscillator:Max. diameter 600 - 1.300 mm 2 - 4.3 ftDiaphragm Walling:Max size 600 x 2.500 mm 2 x 8 ftDepths 25 m 82 ft
* on request
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 170 KNm 122,961 lbsftMax nominal pulldown 135 kN 30,375 lbsMax nominal pullback 170 kN 38,250 lbsUnloading speed 150 rpmWinches:Main winch nominal pullback 14.000 daN 31,500 lbsAuxillary winch nominal pullback 8.000 daN 18,000 lbsDiesel Engine: CATERPILLAR C7 ACERTPower 186 KW 250 HPHydraulic Installation 5 pumpsHydraulic oil tank 470 liters 124 galFuel Tank 200 liters 53 galExpandable Crawlers:Length 4.400 mm 14.5 ftWidth 2.500 - 3.600 mm 8 ft - 12 ftShoes 600 mm 2 ftApprox. Weight: 33 tons 72,750 lbs
-
HR 120The HR 120 is a multipurpose compact drilling
rig suitable for medium to large diameter
drilled shafts for drilling in any kind of soil by
using a rotary system with kelly bar, augers
and buckets. The HR 120 utilizes friction or
interlocking kelly bars for various depths. The
cabin has been designed to offer maximum
efficiency and comfort for the operator which
can also be equipped with an electronic depth
counter, automatic levelling system, and air
conditioning and heating system. The HR
120 comes mounted on expandable crawlers,
but can even be mounted on a truck. In either
version, the kelly bar does not have to be
removed for transport, which decreases the
transport costs, and set-up time on the jobsite.
The HR 120 can be configured for works for
Bored piles, Continuous Flight Auger (CFA),
and even Diaphragm Walls by use of kelly.
Working CharacteristicsWorks with Augers & Buckets:Max diameter 450 / 1.300 mm 1.5 / 4.3 ftWithout lower mast extension 1.500 mm 5 ftDepths 35 - 40 m 114 - 131 ftWorks with CFA:Max diameter 600 mm 2 ftDepths 10 + 4 m 33 + 13 ftDiaphragm Walling:Max size 600 x 2.500 mm 2 x 8 ftDepths 20 m 65.5 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 120 KNm @ min 10 max 36 rpm 88,500 lbsftUnloading speed 160 rpmRotary stroke 2.500 mm (4.300 mm on request) 8 ft (14 ft on request)Winches:Main winch nominal pullback 12.000 daN 26,500 lbsAuxillary winch nominal pullback 7.200 daN 16,000 lbsDiesel Engine: CATERPILLAR 6.6 ACERTPower 129 KW 2.200 rpm 173 HP @ 2,200 rpmHydraulic Installation 4 pumpsHydraulic oil tank 460 liters 121 galFuel Tank 145 liters 38 galExpandable Crawlers:Length 4.170 mm 13.7 ftWidth 2.500 - 3.600 mm 8 ft - 12 ftShoes 600 mm 2 ftApprox. Weight: 28 tons 62,000 lbs
-
HR 100The HR 100 is a multipurpose compact drilling
rig suitable for medium to large diameter
drilled shafts for drilling in any kind of soil by
using a rotary system with kelly bar, augers
and buckets. The HR 100 utilizes friction or
interlocking kelly bars for various depths. The
cabin has been designed to offer maximum
efficiency and comfort for the operator which
can also be equipped with an electronic depth
counter, automatic levelling system, and air
conditioning and heating system. The HR
100 comes mounted on expandable crawlers,
but can even be mounted on a truck. In either
version, the kelly bar does not have to be
removed for transport, which decreases the
transport costs, and set-up time on the jobsite.
The HR 100 can be configured for works for
Bored piles, Continuous Flight Auger (CFA),
and even Diaphragm Walls by use of kelly.
Working CharacteristicsWorks with Augers & Buckets:Max diameter 450 / 1.300 mm 1.5 / 4.3 ftWithout lower mast extension 1.500 mm 5 ftDepths 35 - 40 m 114 - 131 ftWorks with CFA:Max diameter 600 mm 2 ftDepths 9 + 3 m 29.5 + 10 ftDiaphragm Walling:Max size 600 x 2.500 mm 2 x 8 ftDepths 20 m 65.5 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 105 KNm 77,400 lbsft @ min 10 max 36 rpmMax nominal pulldown 8.600 daNm 19,125 lbsUnloading speed 120 rpmRotary Stroke 2.500 mm 8 ftWinches:Main winch nominal pullback 10.000 daN 22,500 lbsAuxillary winch nominal pullback 4.000 daN 9,000 lbsDiesel Engine: CATERPILLAR C6.6 ACERTPower 129 KW 2.200 rpm 173 HP @ 2,200 rpmHydraulic Installation 4 pumpsHydraulic oil tank 300 liters 79 galFuel Tank 140 liters 40 galExpandable Crawlers:Length 4.170 mm 13.7 ftWidth 2.500 - 3.600 mm 8 ft - 12 ftShoes 600 mm 2 ftApprox. Weight: 26 tons 57,300 lbs
-
MIDI DRILLThe MIDI DRILL has been designed to
guarantee better productivity in the drilling of
small diameter holes, with maximum running
economy. Its moderate size allows easy
transportation and use on the jobsite. This rig
is ideal for small contractors who can haul the
MIDI DRILL on a trailer with their large pick-up
truck. Another great feature is that the kelly bar
doesnt have to be removed for transport so it
reduces set-up time on the jobsite.
The MIDI DRILL is mounted on a KOMATSU
PC 75 excavator base which offers enormous
advantages for spare parts and technical
assistance. The cabin is spacious, comfortable,
and ensures a better working environment for
the operator. The MIDI DRILL comes with
an electronic depth counter. Upon request it
can be equipped with an air conditioning and
heating system.
Working CharacteristicsWorks with Augers & Buckets:Max diameter 400 / 900 mm 15 / 36 inDepths 18 - 22 m 59 - 72 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataMounted on KOMATSU PC 75 excavator base
Rotary:Nominal torque 35 KNm 25,795 lbsftMax nominal pulldown 30 kN 6,750 lbsMax nominal pullback 40 kN 9,000 lbsUnloading speed 84 rpmRotary stroke 950 mm 3.11 ftWinches:Main winch nominal pullback 3.600 daN 8,100 lbsAuxillary winch nominal pullback 1.000 daN 2,250 lbs
Diesel Engine: KOMATSU 4D98E-2XFBPower 50 KW 2.300 rpm 67 HP @ 2,300 rpmHydraulic Installation 2 pumpsHydraulic oil tank 70 liters 18.48 galFuel Tank 100 liters 26.4 galCrawler:Length 2.875 mm 9.5 ftWidth 2.050 mm 6.7 ftShoes 450 mm 1.5 ftApprox. Weight: 11,2 tons 24,685 lbs
-
BABY DRILLThe BABY DRILL is the perfect limited access
rig on the market. This rig can get in areas where
large machines only dream of entering, such
as inside elevator shafts, inside buildings, and
under low roof and low headroom conditions.
With its very compact size, it can enter through a
3.3 ft wide door. The BABY DRILL is completely
remote controlled by the operator allowing him
to maneuver the machine from a distance. The
powerpack can easily be dismounted from the
machine and left outside of the building in order
to protect the operators from being intoxicated
by the engines emissions.
Another special feature of the BABY DRILL
is that the mast is telescopic which allows the
BABY DRILL to reduce or increase its height
according to the headroom and kelly bar
requirements.
Upon request, the BABY DRILL can be equipped
with steel or rubber tracked crawlers.
Working CharacteristicsWorks with Augers & Buckets:Max diameter 400 / 600 mm 15 / 24 inDepths 12 - 15 m 39 - 49 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 1.750 daNm 12,900 lbsftMax nominal pulldown 4.000 daN 9,000 lbsMax nominal pullback 2.300 daN 5,175 lbsUnloading speed 80 rpmWinches:Main winch nominal pullback 2.500 daN 5,625 lbsAuxillary winch nominal pullback 1.000 daN 2,250 lbs
Diesel Engine: YANMAR*Power 28,8 KW @ 2.400 rpm 39 HP @ 2,400 rpmHydraulic Installation 2 pumpsHydraulic oil tank 70 liters 18.5 galFuel Tank 48 liters 12.7 galExpandable Crawler:Length 1.970 mm 6.5 ftWidth 1.000 - 1.500 mm 3.3 - 4.9 ftShoes 300 mm 1 ftApprox. Weight: 5,4 tons 11,900 lbs
* upon request with 30 KW electric motor
-
MAICAT 230
Working CharacteristicsWorks with Augers & Buckets:Max diameter along mast 2.000 mm 6.56 ftDepths 40 - 70 m 131 - 229.5 ftCasing oscillator:Max. diameter 1.600 mm 5.2 ft
MAIT, a world-leading manufacturer of hydraulic
drill rigs is pleased to introduce our latest line
of drill rigs called MAICAT. The MAICAT line
combines the experience and knowledge of
MAIT, and Caterpillar excavator bases.
The MAICAT 230 has been designed to
guarantee better productivity in drilling of
medium and large diameter drilled shafts, with
maximum running economy.
The MAICAT 230 is a 60 ton class machine
and has a relatively compact size allowing easy
transportation and positioning in the jobsite.
The MAICAT 230 utilizes a CAT 330 excavator
base mounted on MAITs specifically designed
expandable crawler base which offers greater
stability and enormous advantages for drilling
contractors.
The cabin is spacious, comfortable and
equipped with heating and air conditioning,
ensuring a better working environment for the
operator.
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataMounted on CATERPILLAR 330 excavator base
Rotary:Nominal torque 235 KNm 169,975 lbsftMax nominal pulldown 350 KN 78,750 lbsMax nominal pullback 400 KN 90,000 lbsUnloading speed 115 rpmRotary stroke 6500 mm 21.50 ftWinches:Main winch nominal pullback 235 KN 52,875 lbsAuxillary winch nominal pullback 97 KN 21,825 lbs
Diesel Engine: CATERPILLAR C9 ACERTPower 250 KW 335 HPHydraulic Installation 5 pumpsHydraulic oil tank 310 liters 82 galFuel Tank 615 liters 162 galExpandable crawler:Length 5.450 mm 18 ftWidth 3.000 - 4.300 mm 9.5 - 14 ftShoes 900 mm 3 ftApprox. Weight: 62 - 66 tons 136,650 - 145,500 lbs
-
MAICAT 180MAIT, a world-leading manufacturer of hydraulic
drill rigs, is pleased to introduce our latest line
of drill rigs called MAICAT. The MAICAT Line
combines the experience and knowledge of
MAIT, with Caterpillar excavator bases.
The MAICAT 180 has been designed to
guarantee better productivity in drilling of
medium and large diameter drilled shafts, with
maximum running economy. The MAICAT 180
is a 50 ton class machine and has relatively
compact size, allowing easy transportation and
positioning in the jobsite.
The MAICAT 180 utilizes a CAT 325 excavator
base mounted on MAITs specifically designed
expandable crawler base which offers greater
stability and enormous
advantages for drilling contractors.
The cabin is spacious, comfortable and
equipped with heating and air conditioning,
ensuring a better working environment for the
operator.
Working CharacteristicsWorks with Augers & Buckets:Max diameter 400 / 1.800 mm 1.3 / 6 ftDepths 40 m 131 ftCasing Oscillator:Max. diameter 1.400 mm 4.6 in
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataMounted on CATERPILLAR 325 excavator base
Rotary:Nominal torque 180 KNm 132,660 lbsft @ min 10 max 36 rpmMax nominal pulldown 185 KN 41,625 lbsMax nominal pullback 200 KN 45,000 lbsUnloading speed 115 rpmRotary stroke 5.100 mm 16.7 ftWinches:Main winch nominal pullback 180 kN 45,000 lbsAuxillary winch nominal pullback 80 kN 18,000 lbs
Diesel Engine: CATERPILLAR C7 ACERTPower 187 KW @ 1.900 rpm 252 HP @ 1,900 rpmHydraulic Installation 5 pumpsHydraulic oil tank 260 liters 68.7 galFuel Tank 520 liters 137 galExpandable Crawler:Length 4.900 mm 16 ftWidth 3.000 - 4.300 mm 9.5 - 14 ftShoes 800 mm 2.6 ftApprox. Weight: 50 tons 110,200 lbs
-
MAICAT 45The MAICAT 45 has been designed to guarantee
better productivity for drilling of small and
medium diameter bored piles, with maximum
running economy. Thanks to its compact size,
the MAICAT 45 is easyily transported with no
need to remove the kelly bar. This significantly
allows the customer to reduce transport costs
& set-up time, therefore increasing productivity
on the jobsite.
The MAICAT 45 is mounted on Caterpillar
312 excavator base, which offers enormous
advantages for spare parts and technical
assistance. The cabin is spacious, comfortable
and ensures a better working environment for
the operator.
The MAICAT 45 can even be mounted with a
special CFA application kit for drilling maximum
diameter 450 mm (17.7 in) and up to a maximum
depth of 9 m (29.5 ft).
Working CharacteristicsWorks with Augers & Buckets:Max diameter 400 / 1.000 mm 15.7 / 40 inDepths 26 - 32 m 86 - 105 ftWorks with CFA:Max diameter 450 mm 17.7 inDepths 9 (7+2) m 29.5 (23+6.5) ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataMounted on CATERPILLAR 312C excavator base
Rotary:Nominal torque 4.605 daNm 33,950 lbsft @ min 10 max 36 rpmMax nominal pulldown 6.000 daN 13,500 lbsMax nominal pullback 7.000 daN 15,750 lbsUnloading speed 130 rpmRotary stroke 2.000 mm 7 ftWinches:Main winch nominal pullback 7.000 daN 15,500 lbsAuxillary winch nominal pullback 2.500 daN 5,625 lbs
Diesel Engine: CATERPILLAR 3064 TPower 71 KW @ 1.900 rpm 96 HP @ 1,900 rpmHydraulic Installation 3 pumpsHydraulic oil tank 150 liters 39.6 galFuel Tank 250 liters 66 galCrawler:Length 3.750 mm 12 ftWidth 2.490 mm 8 ftShoes 500 mm 2 ftApprox. Weight: 16 tons 35,200 lbs
-
CFA 24The CFA 24 has been especially designed to
carry out the following works:
- Continuous Flight Auger;
- Direct circulation;
- Jet grouting.
Considering its compact dimensions, the
CFA 24 drilling rig is one of a kind as far as
performance is concerned, since it allows to
carry out jobs with Continuous Flight Auger up
to a depth of 24 m (79 ft).
The CFA 24 is mounted on an expandable
crawler which can open up to 4.300 mm (14 ft)
width, giving a greater stability to the machine.
It is soundproof and is built in conformity to
the latest European safety standards. Upon
request, it can be supplied with a computer for
recording and monitoring all the data concerning
CFA drilling.
Other optional accessories can be provided by
MAIT such as hydraulic auger cleaner, pulldown
winch, cage vibrator, concrete injection pipe
and CFA tooling.
Working CharacteristicsWorks with CFA:Max diameter 400 / 800 mm 1.3 - 2.6 ftStandard depths 18 m 59 ftDepth with extension pole 24 m 79 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataRotary:Nominal torque 150 KNm 110,550 lbsftMax nominal pull 48.000 daN 108,000 lbsRotary vertical stroke (withouthydraulic cleaner 19.000 mm 62 ft
Rotary vertical stroke (withhydraulic cleaner 18.000 mm 59 ft
Winches:Main winch Max nominal pull 12.000 daN 27,000 lbsAuxillary winch Max nominal pull 8.000 - 12.000 daN 18,000 - 27,000 lbs
Diesel Engine: CATERPILLAR C7 ACERTPower 186 KW @ 2.100 rpm 250 HP @ 2,100 rpmHydraulic oil tank 470 liters 124 galFuel Tank 200 liters 53 galExpandable Crawler:Length 4.900 mm 16 ftWidth 3.000 - 4.300 mm 9.5 - 14 ftShoes 800 mm 2.6 ftApprox. Weight: 40 - 43 tons 88,160 - 94,772 lbs
1275
4.2f
t
2200
7.2f
t
490016ft
2830
092
.8ft
30009.8ft
1900
062
.3ft
8302.7ft
-
THH9The THH9 is the latest driven pile rig created
by MAIT to drive pre-cast square concrete
piles, cased piles, H-beams piles, etc.. This 65
tons class machine offers unmatched stability
for driving piles in the most difficult working
conditions.
The THH9 has been specifically designed to
mount MAIT hydraulic hammers (from 3 to 9
tons) as well as from other manufacturers upon
request.
Another special feature of the THH9, is that the
mast is equipped with a telescopic boom that
simplifies the centering of the pile by extending
the mast horizontally outwards to 1.000 mm
(3.3 ft). Piles can be driven vertically as well as
inclinated, depending upon pile and hammer
characteristics.
Thanks to the ability of THH9 crawler cylinders
stroke, the expandable crawler undercarriage
offers enormous advantages for transport and
stability during the work phase because of the
great range of its dimensions from 3.000 to
4.500 mm (10 - 15 ft).
Working CharacteristicsWorks with Hammer:Max hammer weight 15 tons 33,060 lbsMax pile length 15 m 49 ftMax pile weight 5 tons 11,020 lbs
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataWinches:Main winch nominal pullback 24.000 daN 54,000 lbsAuxillary winch nominal pullback 12.000 daN 27,000 lbs
Diesel Engine: CATERPILLAR C9 ACERTPower 242 KW @ 2.100 rpm 325 HP @ 2,100 rpmHydraulic oil tank 800 liters 211 galFuel Tank 430 liters 113.5 galExpandable Crawler:Length 5.900 mm 19.3 ftWidth 3.000 - 4.500 mm 9.5 - 15 ftShoes 900 mm 3 ftApprox. Weight: 65 tons 143,260 lbs
-
THH6The THH6 was specially designed for driven piles works with hydraulic hammers. The considerable length of the mast allows a stroke suitable for installing driven piles up to a depth of 16 m (52.5 ft).MAIT provides a full range of hydraulic hammers, optimizing weight, dimensions and energy output in order to obtain one of the most compact and efficient equipment on the market. The THH6 is suitable for utilizing 3 to 7 tons ram weight hydraulic hammer category.The THH6 rig is suitable for the following applications:- Driven piles;- Continuous Flight Auger;- Bored piles;- Works with hydraulic vibrator.The THH6 is equipped with a specially designed horizontal sliding mast which enables the operator to center the pile with 1 m (3.3 ft) stroke allowing high precision in hole set-up operations. Piles can be driven vertically as well as inclinated, depending upon pile and hammer characteristics. The rigs crawler undercarriage is particularly large and stable and provides maximum safety conditions for the operator.The THH6 is a very versatile multipurpose drilling rig, which is easy to operate, maintain and to transport. Another great feature of the THH6 is that it does not require disassembling for transporting from job to job, due to the hydraulic expandable tracks and folding mast features.
Working CharacteristicsWorks with Hammer:Max hammer weight 9,5 tons 20,938 lbsMax pile lenght 16 m 52.5 ftMax pile weight 4 tons 8,816 lbsWorks with Augers & Buckets:Max diameter 500 - 1.500 mm 1.6 - 5 ftDepths 30 - 40 m 98.5 - 131 ftCasing Oscillator:Max. diameter 1.400 mm 4.6 inWorks with CFA:Max diameter 800 mm 2.6 ftMax depths 24 m 78.7 ft
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
Technical DataWinches:Main winch nominal pullback 14.000 daN 103,180 lbsAuxillary winch nominal pullback 8.000* - 12.000** daN 58,960* - 88,440** lbs
Diesel Engine: CATERPILLAR C7 ACERTPower 186 KW @ 2.100 rpm 250 HP @ 2,100 rpmHydraulic oil tank 470 liters 124 galFuel Tank 200 liters 52.8 galExpandable Crawler:Length 4.930 mm 16 ftWidth 3.000 - 4.300 mm 9.5 - 14 ftShoes 800 mm 2.6 ftApprox. Weight: 40 - 50 tons 88,160 - 110,200 lbs
* freefall** on request
-
HH series
HH 9000 from series 3 [7 - 9 tons]
HH 6000 from series 1 [3 - 7 tons]
HH 11000 from series 2 [8 - 12 tons]
-
S
.p.A
. DR
ILLI
NG
RIG
Svi
a Fl
amin
ia S
econ
da, 1
49/1
53 -
P.O
. Box
104
0 60
027
OS
IMO
(AN
) ITA
LY- T
EL
+39
071
7822
186
- FA
X +
39 0
71 7
8053
5- w
eb: h
ttp://
ww
w.m
ait.i
t - E
-mai
l: in
fo@
mai
t.it
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
SERIES 1 [ 3 - 7 tons ]Hammermodel
Max.Energy
Dropheight
Blows per minute
Ram / Total weight
Hammerlength
Drive cap Maxinner diameter
Series 1 hydraulic hammers are suitable to be mounted on THH6, THH9 and HR 180 (THH version).
HH 3000 33 kNm23,868 lbsft1.100 mm
3.6 ft 50 - 120 3.000 / 6.500 kg6,612 / 14,326 lbs
4.400 mm14.4 ft
400 x 400 mm - 530 mm 15.7 x 15.7 in - 21 in
HH 4000 44 kNm31,825 lbsft1.100 mm
3.6 ft 50 - 120 4.000 / 7.500 kg8,816 / 16,530 lbs
4.400 mm14.4 ft
400 x 400 mm - 530 mm 15.7 x 15.7 in - 21 in
HH 5000 55 kNm39,781 lbsft1.100 mm
3.6 ft 50 - 120 5.000 / 8.500 kg
11,020 / 18,734 lbs4.400 mm
14.4 ft 400 x 400 mm - 530 mm 15.7 x 15.7 in - 21 in
HH 6000 66 kNm47,738 lbsft1.100 mm
3.6 ft 50 - 120 6.000 / 9.500 kg
13,224 / 20,938 lbs4.400 mm
14.4 ft 400 x 400 mm - 530 mm 15.7 x 15.7 in - 21 in
HH 7000 77 kNm55,694 lbsft1.100 mm
3.6 ft 50 - 120 7.000 / 10.500 kg15,428 / 23,142 lbs
4.400 mm14.4 ft
400 x 400 mm - 530 mm 15.7 x 15.7 in - 21 in
SERIES 2 [ 8 - 12 tons ]Hammermodel
Max.Energy
Dropheight
Blows per minute
Ram / Total weight
Hammerlength
Drive cap Maxinner diameter
Series 2 hydraulic hammers are suitable to be mounted on HR 300-570 and HR 800 (THH version).
HH 8000 88 kNm63,650 lbsft1.100 mm
3.6 ft 50 - 120 8.000 / 16.000 kg17,632 / 35,264 lbs
5.000 mm16.4 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
HH 9000 99 kNm71,607 lbsft1.100 mm
3.6 ft 50 - 120 9.000 / 17,000 kg19,836 / 37,468 lbs
5.000 mm16.4 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
HH 10000 110 kNm79,563 lbsft1.100 mm
3.6 ft 50 - 120 10.000 / 18.000 kg22,040 / 39,672 lbs
5.000 mm16.4 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
HH 11000 121 kNm87,519 lbsft1.100 mm
3.6 ft 50 - 120 11.000 / 19.000 kg24,244 / 41,876 lbs
5.000 mm16.4 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
HH 12000 132 kNm95,476 lbsft1.100 mm
3.6 ft 50 - 120 12.000 / 20.000 kg26,448 / 44,080 lbs
5.000 mm16.4 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
SERIES 3 [ 7 - 9 tons ]Hammermodel
Max.Energy
Dropheight
Blows per minute
Ram / Total weight
Hammerlength
Drive cap Maxinner diameter
Series 3 hydraulic hammers are suitable to be mounted on THH9 and HR 260, HR 300-570, HR 800 (THH version).
HH 7000 84 kNm60,757 lbsft1.200 mm
3.9 ft 50 - 120 7.000 / 12.500 kg15,428 / 27,550 lbs
5.100 mm16.7 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
HH 8000 96 kNm69,437 lbsft1.200 mm
3.9 ft 50 - 120 8.000 / 13,500 kg17,632 / 29,754 lbs
5.100 mm16.7 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
HH 9000 108 kNm78,116 lbsft1.200 mm
3.9 ft 50 - 120 9.000 / 14.500 kg19,836 / 31,958 lbs
5.100 mm16.7 ft
500 x 500 mm - 700 mm 19.7 x 19.7 in - 27.6 in
MAIT Hydraulic Hammers series
MAIT has designed and developed the following three hydraulic hammer series to better serve our customers needs. Below you can find the standard pile caps configuration for our hydraulic hammers. MAIT can develop all sorts of different pile caps according to your requirements. We can even apply the hammers to your existing machine.
-
MAIT also manufactures:
- Hydraulic drilling rigs of every size:- for piling, diaphragm walls, continuous flight augers;- for water wells;- for soil investigation,consolidation, civil engineering;- jet-grouting;
- Casing oscillator;- Power pack;- Casing tubes;- Augers and buckets;- Hydraulic grabs for diaphragm walls;- Continuous flight auger;- Tremie pipes;- Drilling tools and accessories;
01/2
008
All t
echn
ical d
ata
are
to b
e co
nsid
ered
as
appr
oxim
ate.
MAI
T re
serv
es th
e rig
ht to
mod
ify th
em o
ppor
tune
ly. A
ll num
bers
sho
wn
in fe
et a
nd in
ches
hav
e be
en ro
unde
d an
d ar
e ap
prox
imat
e fo
r the
sim
plific
atio
n of
con
vers
ion.
The
nom
inal
val
ues
are
refe
rred
to 1
00%
tota
l effi
cienc
y.
top related