-m0 installation guide- - microsoft · zero (native usb port) arduino avr boards arduino arduino or...

-M0 Installation Guide- For Windows

outline

• Arduino 1.6.X install

• Arduino ZERO Packages install

• XYZprinting M-0 setting

2

Arduino 1.6.X

• https://www.arduino.cc/

Download Arduino 1.6.x

• Install Arduino 1.6.X

3

Arduino ZERO Packages

• Click Tools/Board/BoardManager

4

Arduino ZERO Packages

• Click Arduino SAMD Boards(32-bits ARM

Cortex –M0+) by Arduino，select Version

1.6.6

5

XYZprinting M-01 Library

• Copy library forder ”XYZdurino Maker Board

M0” to

C:\Users\UserName\Documents\Arduino\hard

ware

6

XYZprinting M-01 setting • Click Tools/Board check the “XYZdurino Maker Board M0

(Native USB Port)” is show up.

7

M-01 driver install

• Go to Device Manager to update the driver

8

M-01 driver install

• Select “Browse my computer for driver

software””

9

M-01 driver install

• Select the driver

10

M-01driver install

• Select “Install this driver software anyway”

11

M-01driver install

• After driver installation, XYZdurino M0 will

be shown on Ports(COM&LPT).

12

Finish

• Finish-You can start to test the board.

13