lte diameter signaling index wp 2100662
Post on 07-Aug-2018
230 Views
Preview:
TRANSCRIPT
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
1/23
Oracle White Paper, September 2013
LTE Diameter Signaling Index2nd Edition
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
2/23
LTE Diameter Signaling Index
Contents
Executive Summary 3
Industry Trends and Indicators 4
Oracle Communications LTE Diameter Signaling Index Forecast 6
Trend #1: Signaling Traffic Growing More Than Twice as Fast as Mobile Data 9
Trend #2: Policy Use Cases Drive the Most Traffic
Trend #4: Europe, Middle East, and Africa is the
10
Trend #3: North America Leads in Total Diameter Traffic 11
Fastest Growing Diameter Market 13
Trend #5: Latin America is the Long-Term Growth Region 14
Trend #6: Japan/Asia Pacific Growth Driven by Five Countries 16
Trend #7: The Diameter Protocol Continues to Expand 17
The Future of Signaling 19
Annex A - Assumptions and Methodology 21
Annex B - Diameter Interfaces in the LTE Core 22
2
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
3/23
LTE Diameter Signaling Index
Executive Summary
The Diameter signaling protocol has taken center stage in the mobility world in the past few
years. Used for activity coordination between Internet Protocol (IP) network elements such
as policy servers, online charging systems and mobility gateways, Diameter serves a crucial
function in mobility. And, as operators have migrated their networks to LTE, added new servicesand implemented more sophisticated policy use cases, signaling volumes are skyrocketing.
To predict and accommodate Diameter signaling growth, service providers need to factor in
subscriber profiles and behaviors and the types of services and devices they have and plan to
introduce on their networks. This is a shift for network engineers responsible for predicting
traffic and signaling patterns. Data sessions, video downloads, and the invocation of policy and
charging rules all introduce additional signaling into networks, all of which must be considered
to accurately predict network needs.
This LTE Diameter Signaling Index serves as a guide for network architects and engineers
building Diameter networks where policy intelligently orchestrates the subscriber experience
and Diameter signaling conducts communications among policy servers, charging systems,subscriber databases and mobility management functions. As a measure of network
intelligence, the Oracle Communications LTE Diameter Signaling Index™ is an important tool for
service providers to manage and monetize mobile data.
Last year, we released the first edition of this forecast and analysis report to help operators
understand the impact of the phenomenal growth in signaling on their networks and ultimately,
on their customers’ experiences. In the 2012 report, we forecasted a rate of nearly 47 million
messages per second (MPS) by 2016. Using an evolved methodology, this year’s numbers also
show significant growth. In fact, by 2017, worldwide LTE Diameter traffic will reach nearly 99
million MPS, a 140% five-year compound annual growth rate (CAGR).
Other findings of note include:
s Policy signaling volumes are expected to more than triple in the next year. By 2017, policy
will account for 62% of signaling volumes, surpassing basic mobility;
s Policy-related signaling is growing at a 164% CAGR through 2017, due to both the number
and complexity of use cases;
s Online Charging (OCS) is the fastest growing Diameter use case, with a global CAGR of
180% through 2017;
s North American volumes remain the world’s largest, reaching almost 43 million MPS by
2017, growing at a 127% CAGR;
s Europe, Middle East and Africa (EMEA) and Central/Latin America (LATAM) regional growth
rates are both well over a 200% CAGR through 2017;
s Japan/Asia Pacific (JAPAC) continues to be a hybrid mature/emerging market. The ‘mature’
sector accounts for most of the LTE coverage and shows LTE Diameter signaling traffic
growth characteristics similar to North America;
s Subscriber behaviors and smartphone penetration continue to play key roles in the growth
of Diameter signaling; and,
s The definition of the protocol itself is expanding. The number of Diameter interfaces,
commands and associated parameters is growing rapidly, adding to the need for careful
architectural planning and constant interface upkeep.
3
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
4/23
LTE Diameter Signaling Index
This report outlines global trends in LTE Diameter signaling growth through 20171. Serving as a
barometer of demand for overall network capacity, the forecast includes regional breakdowns of
traffic and associated growth rates. Likewise, we analyze the key applications of Diameter and
chart their impact on traffic and growth rates through the same forecast period.
The Oracle Communications LTE Diameter Signaling Index CalculatorTM, upon which the
forecast is based, is helping operator technology executives more accurately plan their
network’s architecture 2. At the same time, a use-case specific understanding of customer
behaviors and experiences is assisting operator business executives as they plan market-facing
offers, evaluate opportunities and incorporate third-party capabilities into their services.
Industry Trends and Indicators
Service providers evolving their mobility business models face two challenges: offering
compelling services and ensuring their networks can handle the associated performance and
scalability requirements. To serve these business models, operators are expanding their use
of IP throughout their 3G networks and ultimately to all-IP LTE networks. This necessitates amove from the older RADIUS, MAP and CAMEL interfaces to the newer, more sophisticated
Diameter signaling protocol.
Though much attention has been paid to the pace at which IP traffic and the number of LTE
connections are expected to grow, this Index demonstrates that Diameter signaling traffic
increases continue to outpace data traffic growth (see Trend #1 below). For this reason,
executives, engineers and network architects are moving Diameter signaling up on their
investment priority lists.
The growth in signaling traffic correlates directly to the sophistication of services and pricing
plans in LTE networks, as the need for more subscriber and service intelligence triggers more
communication among core network elements. Examples of such service plans include:
s Tiered services
s Shared data plans
s Casual usage and loyalty programs
s “Toll-free” or sponsored data usage
s Mobile advertising
s Quality enhanced over-the-top (OTT) applications and content
s Cloud and machine-to-machine (M2M) services.
Rather than risk under-engineering LTE networks, service providers need to consider how data
sessions, video downloads and sophisticated policy and charging rules will affect signaling, and
then ensure that a robust Diameter network is in place to manage the signaling traffic.
1 The scope of this repor t is limited to the LTE environment. It is impor tant to note that the Diameter protocol also ser ves the IP segments of 3G networks
as well as fixed networks.
2 Operators wishing a more detai led analysis are encouraged to contact us for a customized consultation emp loying the Oracle Communications LTE Diam
eter Signaling Index CalculatorTM
4
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
5/23
LTE Diameter Signaling Index
Execution of these services requires frequent Diameter signaling among the following
elements:
s Policy Servers (PCRF)
s Online Charging Systems (OCS)
s
Offline Charging Systems (OFCS)s Home Subscriber Servers (HSS)
s Mobility Management Entities (MME)
s Policy Control Enforcement Points (PCEF), like Packet Gateways (PGW)
and Deep Packet Inspection (DPI)
s Session Management, such as Call Session Control Functions (CSCF).
LTE penetration rates projected by industry analysts indicate North America is still moving
aggressively to replace legacy technology. At 56% penetration, it is currently the world’s largest
LTE market.3 JAPAC is second, but with only 11% penetration rate by the year 2017, this leaves
significant room for growth. In fact, the JAPAC traffic rates being observed today are paltrycompared to what is to come.
Likewise, industry forecasts about the sheer number of devices, applications, and services are a
harbinger of what is on the horizon. By 2017, more than 10 billion mobility devices will process
more than 300 billion app downloads worldwide.4 All of these will generate increased Diameter
signaling traffic in the core network. Many of them will be used in an “always-on” mode as
subscribers engage in multiple concurrent data sessions, generating more Diameter signaling
messages per subscriber.
Finally, the notion of “busy hour” will evolve, because the level of signaling traffic an operator
experiences is driven by more than just the number of subscribers. It is also a function of
subscriber behavior, the devices they use and the services and applications they invoke. As
such, a “busy hour” is also affected by these variables, meaning that signaling traffic peaks and
valleys will not necessarily occur at the same time of day.
3 Informa Telecoms & Media - World Cellul ar Information Ser vice
4 2013 Cisco Visual Networking Index
5
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
6/23
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
7/23
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
8/23
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
9/23
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
10/23
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
11/23
LTE Diameter Signaling Index
When operators embrace policy, they typically begin with fair usage and traffic management
use cases. However, as they increase both the number and complexity of the use cases and
begin implementing more revenue-generating policy rules, the amount of Diameter traffic
between the PCRF and enforcement points expands rapidly. We have observed at least one
operator with more than 700 individual policy rules in its policy server, with ongoing growth
expected.
The fastest growing use case is online charging (OCS), with just slightly more than 24 million
MPS expected by 2017, a 180% CAGR. This is especially true in regions where prepaid
charging is dominant, as prepaid services require more Diameter dialog between the PCRF and
the OCS. Regions such as LATAM and JAPAC are dominated by prepaid service plans, driving
a speedier pace of Diameter growth. Not surprisingly, offline charging (OFCS) is smaller and
growing more slowly.
Mobility (roaming from 3G to LTE networks and vice versa) does not show the same impact on
Diameter traffic volumes as Policy and OCS. We project Mobility in 2017 to reach 8.3 million
MPS with a CAGR of 76%.
TREND #3: NORTH AMERICA LEADS IN TOTAL
DIAMETER TRAFFIC
North America is presently the largest LTE market in the world with a 56% penetration rate
predicted by 2017.7 As such, signaling volumes are already rather hefty and the MPS growth
rate is slower than in less penetrated markets. We predict this region will generate 42.7 million
MPS by 2017 at a CAGR of nearly 127%.
Policy is expected to surpass mobility this year as the leading source of signaling volume
increases in the region, with nearly a million MPS expected this year, as compared to just
slightly more than half that amount for mobility. By 2017, policy use cases in North America will
generate more than 25 million MPS at a 152% CAGR (Figure 6).
7 Informa Telecoms & Media - World Cellul ar Information Ser vice
11
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
12/23
LTE Diameter Signaling Index
&
#"
#&
!"
!&
$"
!"#! !"#$ !"#% !"#& !"#' !"#(
1 2
3 4 5 / 6 7 8 7 9 : 7 ; ; / < 7 ; = 7 9 > 7 ? - @ A
B 6 5 , , 5 - @ ; C
I9/?,7 F-66J@5?/85-@; 123 45/67879 >5
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
13/23
LTE Diameter Signaling Index
TREND #4: EMEA IS THE FASTEST GROWING
DIAMETER MARKET
Diameter signaling is growing at a rapid 224% CAGR in EMEA, and will deliver 17.9 million
MPS by 2017. Like North America, there is increasing policy use case maturity in European LTE
deployments including multi-media and more complex offers, driving signaling traffic upward.The region as a whole will experience an incredible 243% Policy CAGR through 2017, as seen
in Figure 7 below. OCS will also increase signaling with a 237% CAGR in the same period,
amounting to 3.8 million MPS by the end of 2017.
!
%
'
)
#!
#"
#%
!"#! !"#$ !"#% !"#& !"#' !"#(
1 2 3
4 5 / 6 7 8 7 9 : 7 ; ; / < 7 ; = 7 9 > 7 ? - @ A B 6
5 , , 5 - @ ; C
=-,5?O
IF>
:-.5,58O
IVF>I9/?,7 F-66J@5?/85-@; 123 45/67879 >5
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
14/23
LTE Diameter Signaling Index
Trends to consider in EMEA:
s Given the penetration rates, 3G will be in place in this region for several more years. Market
growth has slowed somewhat, due to economic factors. Consider, for example, that
London did not begin LTE deployments until the 2012 Olympics, and it has slowed post-
Olympics;
s
Roaming is much more common in Europe than other regions, due to the proximity of the
individual countries and ease of travel between EU member states. This ongoing roaming
will trigger higher traffic levels in Diameter networks. As the LTE penetration increases,
so too will roaming between 3G and LTE networks and between LTE networks, driving
signaling traffic upward;
s Policy use cases will drive Diameter traffic as subscribers are expected to adopt more
multimedia related services and operators deliver more complex policies in their LTE
environments to coax subscribers to the newer networks;
s While OFCS only represents 2% of the total MPS for this region, OCS represents 20%.
Charging traffic (both OFCS and OCS) will increase significantly year over year due to
increased subscription numbers.
TREND #5: LATAM IS THE LONG-TERM GROWTH REGION
The LATAM region is at present the smallest market in terms of LTE subscriptions and LTE
Diameter signaling. The LTE penetration rate for LATAM is projected to reach only 8% by 2017.9
As such, any increase generates outsized percentage growth rates during this time.
Brazil is the exception, where subscription growth is strong. LTE subscriptions begin in
2013 and are forecast to reach almost 15% market penetration by 2017.10 While this is still
comparatively low, it does foretell a rapid increase in Diameter traffic.
As with other regions, policy will account for much of the signaling growth, as shown in
Figure 8 below. Policy in LATAM will yield 1.4 million MPS by 2017, a 317% CAGR. OCS
will be second in both total traffic and growth rates with just over 1 million MPS expected,
representing a 233% CAGR for the same period.
9 Informa Telecoms & Media - World Cellular Information Service
10 Ibid
14
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
15/23
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
16/23
LTE Diameter Signaling Index
TREND #6: JAPAC GROWTH DRIVEN BY FIVE COUNTRIES
JAPAC’s Diameter growth is attributable largely to its ‘mature’ markets: Australia, Japan, Korea,
Hong Kong and Singapore. These countries represent most of the LTE subscriptions in this
region, as each country will exceed 50% penetration by 2017.11
This is not the case for the rest of Asia. Developing countries such as India show only a 7%
penetration rate by 2017.12 As other Asian operators implement LTE in the coming years, the
region will likely experience a steady growth rate in both LTE device penetration and Diameter
signaling.
From a Diameter signaling perspective, JAPAC will reach an impressive 35.2 million MPS
by 2017, nearly double the amount in EMEA and 85% the size of North America. The Policy
growth curve through 2017 is comparable to North America, as seen in Figure 9. OCS will
generate 8.5 million MPS by 2017, again 85% of the North American traffic volume.
Figure 9: JAPAC Regional Diameter Signaling Index
&
#"
#&
!"
!&
!"#! !"#$ !"#% !"#& !"#' !"#(
I9/?,7 F-66J@5?/85-@; 123 45/67879 >5
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
17/23
LTE Diameter Signaling Index
Key points for JAPAC include:
s JAPAC represents the second most highly penetrated LTE market by 2017, yet at 11%,
there is still tremendous growth to be had;
s China will start to have a significant impact on regional LTE penetration by 2017;
s
Mobility is projected to reach 3.5 million MPS by 2017, a CAGR of 84%. Mobility willcontinue to grow in this region as developing countries continue to maintain their 3G
networks while they roll out LTE in metropolitan areas. It is not likely that these countries
will adopt LTE quickly and aggressively as subscriber buying behaviors still heavily favor
feature phones;
s Policy shows aggressive growth again thanks to the five countries with the greatest
penetration and mature market characteristics. A chief factor is video, which is quite
popular in Asia, as policy use cases supporting QoS for video sessions become more
common;
s OFCS shows roughly a two-fold increase each year, at a CAGR of 119%, but OCS weighs in
most heavily here. Charging growth is directly related to subscriber growth in this case, and
as the market matures, so too will the Diameter traffic associated with charging;
s Asia will go through much of the same evolution as North America, with policy and OCS
galvanizing Diameter MPS growth.
TREND #7: THE DIAMETER PROTOCOL
CONTINUES TO EXPAND
Diameter is a nascent protocol, and networks are still limited in their LTE coverage. Today the
biggest impacts to Diameter traffic remain the number of subscriptions, subscriber behaviors
and the proliferation of smartphones. The result of these three characteristics drives policy usecases, charging transactions and mobility transactions.
But this won’t be the case for long. The 3GPP standards body is busily expanding the definition
of Diameter as it outlines new interfaces to replace legacy systems. These interfaces may
not individually have a substantial impact on signaling traffic, but collectively they will have a
marked effect. This is due to the nature of the Diameter protocol. The Internet Engineering Task
Force (IETF) defined a base set of commands and associated parameters called Attribute Value
Pairs (AVPs) for Diameter. The 3GPP has also defined specific commands and AVPs for each
interface, depending on the application the interface supports.
For example, the SLh interface has been defined for use in Location Based Services (LBS).
The SLh interface only introduces two new commands to the Diameter protocol, so theimpact to overall traffic flow is minimal. By comparison, the S6a interface used between the
Mobility Management Entity (MME) and the Home Subscriber Server (HSS) must support
some 38 commands and more than 1,000 AVPs. Each command represents part of a Diameter
transaction, which makes Diameter much different than the SS7 protocol in which only a
handful of common messages are used to support the entire network. See Appendix B for a list
of Diameter interfaces commonly invoked in LTE networks.
17
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
18/23
LTE Diameter Signaling Index
The recently defined Sy interface allows the PCRF to bypass the GGSN/PGW when accessing
the OCS. This does not directly impact Diameter signaling volume since this same interface
already exists between the PCRF and the GGSN/PGW, and a service provider will choose one
path or the other for a given transaction. It may, however, present an opportunity for more
complex policy use cases in the future.
Finally, there is the Access Network Discovery and Selection Function (ANDSF), the standard
underlying the emerging HotSpot 2.0 service.13 This new standard burst on the scene recently
and the industry is busily defining how it will work. The concern is how to handle the constant
location updates as a subscriber moves from Wi-Fi hotspot to hotspot. No standards exist
yet for managing the flow of signaling messages generated by Wi-Fi roaming, but work is
underway. Regardless of the outcome, this will be another source of signaling traffic that
could equal or surpass the signaling traffic generated for wireless roaming in a 3G network.
13 HotSpot 2.0 is defined and certi fied by the WiFi A lliance (w w w.wi -fi.org )
14 Informa Telecoms & Media - World Cellular Information Service
18
http:///reader/full/service.13http:///reader/full/service.13http:///reader/full/service.13
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
19/23
LTE Diameter Signaling Index
The Future of Signaling
This is Just the Beginning
Industry professionals can expect Diameter growth to continue steadily over the next several
years as both implementations and the role of Diameter expand.
Worldwide, LTE connections are growing at nearly 70% CAGR.14 This is certainly dramatic
growth, but it pales in comparison to the years beyond this forecast where more than 6
billion subscribers, many with multiple subscriptions, will migrate to LTE networks and more
sophisticated devices.
And signaling growth is attributable to more than just the move to smartphones and tablets.
Subscriber behavior is evolving as they become even more immersed in a mobility-enhanced
digital lifestyle. Formerly occasional use for voice or email has exploded into nearly constant use
of devices for social networking, video streaming, gaming, banking, enterprise productivity and
commercial transactions.
The Diameter world is more complicated than just sheer numbers of subscribers or the number
of minutes one spends on the network. The type of applications, the amount of interactivity
required with the application, and the number of network elements touched by these interfaces
contribute to the notion of ‘signaling intensity’ as an essential metric for network planning.
Cloud Services, Network Function Virtualization and Software Defined
Networks All Mean More Diameter Signaling
There is much discussion in the industry today regarding cloud services, Network Function
Virtualization (NFV) and Software Defined Networking (SDN). While not the same, these
technologies have overlapping functions and benefits, including better capital and operating
expense profiles, more flexible use of industry standard hardware and the ability to engage
resources and deliver services in a more ‘on-demand’ mode.
Operators are rapidly embracing cloud-based services. Hosted, managed and Software as a
Service (SaaS) business models are all gaining favor in operators’ business and service support
environments. As this business model matures, operators are beginning to take the next steps
to introduce the cloud into their network functions.
The industry’s largest operators are participating in a 3GPP study group dedicated to defining
the requirements for NFV. The intent is to allow participants to quickly take advantage of this
virtualization, which is available today on a number of platforms. Virtualization reduces the
cost of Diameter implementations and brings with it the ability to employ and retire computing
resources as needed.
SDN is different from NFV, even though it takes advantage of virtualization. SDN seeks to
enable full software-based control of all network functions as well as discrete control and
packet routing/forwarding planes. Once functions in the EPC have been virtualized, it is easier
to implement an SDN coupled with the PCRF. It is important that the PCRF be coupled with the
SDN Controller so decisions regarding additional transport resources are based on intelligent
rules defined in the PCRF.
14 Informa Telecoms & Media - World Cellular Information Service
19
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
20/23
LTE Diameter Signaling Index
SDN does not directly drive additional Diameter traffic, but it does enable new services to be
offered more quickly. As these new services are implemented in the network, the services
themselves will drive additional Diameter traffic in the core.
One of the benefits of NFV and SDN is the use of industry standard hardware, whereas
proprietary implementations use hardware and operating systems optimized for the function.
As such, this migration toward standard hardware and operating systems will impose a
temporary performance tax, which in turn will drive some additional signaling. Estimates found
in multiple industry publications are as high as 80%, but hardware and software vendors are
actively seeking ways to tune their products for this new environment. During this evolutionary
period, it is reasonable to conclude operators will have to provision some additional hardware
to overcome the inefficiencies, yielding incremental Diameter traffic. Optimization tools will
mature and eventually mitigate many of these inefficiencies in the future, but for the present
there will be some performance hurdles.
Finally, virtualization opens up new opportunities to extend Diameter to other networks, along
with resource sharing across networks. This includes offering Diameter as a Service (DaaS),
which will undoubtedly drive additional Diameter growth.
The Role of Session Initiation Protocol (SIP)
The SIP protocol replaces the ISDN User Part (ISUP) protocol used in Signaling System #7
(SS7) networks for call control. Originally developed for enterprise Voice over IP (VoIP), SIP is
now widely deployed as the standard voice call control signaling protocol. As networks migrate
to all-IP architectures, signaling is divided between two technologies: Diameter assumes the
authentication, authorization and charging roles in the network, while SIP handles the call
control functions.
When enterprises implement IP PBXs, they connect directly to the Internet, but calls will not
connect into the Public Switched Telephone Network (PSTN). This requires a PSTN Gateway, and
traditional trunks from the local service provider. This may be costly for a smaller business, andit tends to reduce the cost advantages of an IP PBX. In response, service providers now provide
what is known as ‘SIP Trunking’, an IP connection to an Internet Telephony Service Provider
(ITSP), which delivers connections to the Internet as well as the PSTN.
The ITSP also provides long distance services to the enterprise at a fraction of the cost of
traditional long distance.
As SIP continues to mature, businesses become more comfortable with SIP technology,
spurring growth in this market. According to an AT&T report quoting Heavy Reading IP Services
Insider, SIP Trunking will grow from 8.5 million SIP Trunks in 2009, to 24.3 million SIP Trunks by
the end of 2013.15
Services such as WebRTC and Unified Communications will spur further growth in SIP signaling.Future editions of this report will contain additional insights and forecasts regarding SIP.
15 “SIP Trunking : Realizi ng the Value for SMBs”, http: / / att.v tp -media.com / smb 20
http:///reader/full/media.comhttp:///reader/full/media.com
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
21/23
LTE Diameter Signaling Index
ANNEX A – Assumptions and Methodology
The methodology for crafting this forecast has evolved since the 2012 forecast report. The
number of LTE subscriptions has changed, as we used updated external sources for this
forecast. This version of the Index is also based on new traffic models that take advantage of our
experience in global service provider LTE networks. We have fine-tuned our models to accuratelyreflect evolving subscriber behaviors.
The forecast period shifted, as this Index considers growth beginning in 2012 rather than 2011,
and extending through 2017. Because 2012 saw higher penetration rates than 2011, the overall
CAGR for Diameter changed accordingly.
The Index is an LTE Diameter traffic demand model rather than an engineered network model.
It is a baseline model that serves as a starting point from which service providers can layer on
additional factors such as network architecture, topology, capacity requirements, geo-redundancy
and others needed to design a robust, reliable and scalable Diameter Network. Readers are
cautioned not to rely solely on this macro-level analysis to predict their unique needs.
The Index focuses solely on LTE networks and does not account for Diameter traffic on 3G
networks, other than 3G to 4G roaming. The Index also excludes IMS applications with the
exception of VoLTE.
Also, the Index does not include additional Diameter traffic that will be generated by hundreds of
millions of M2M devices that will come onto networks over the next few years. Future versions of
this report will account for the M2M market.
The Oracle Communications LTE Diameter Signaling Index™ relies on a number of industry
resources such as LTE subscriber data from the Informa Telecoms & Media World Cellular
Information Service, SIP information from Heavy Reading and the Cisco Visual Networking Index
for general market context. 3GPP and GSM Association specifications are used for determiningtraffic flows for each unique service. The flows are then used to determine the number of
Diameter messages that are created for individual session types.
Traffic flows are also validated in our Diameter Traffic Laboratory, which is a dedicated facility
that uses our Diameter Signaling Router, Policy Server, and Home Subscriber Server network
elements.
A key input to the forecast is our proprietary Oracle Communications LTE Diameter Signaling
Traffic CalculatorTM. We make this tool available to operators to help them forecast the level
of Diameter signaling associated with interdependent factors such as: network growth and
evolution; subscriber growth and evolution; and services growth and penetration. Default values
are based on our signaling experience with customer networks and serve as a baseline fordimensioning Diameter networks. These values may also be modified by an individual operator’s
assumptions, experiences and predictions. Once the calculator is run, the operator can see the
volume of Diameter signaling traffic generated at each interface as well as the total forecast.
In this report and forecast, we use the industry standard metric of Messages per Second (MPS)
for the volume of signaling traffic in a network. The 3GPP standards refer to transactions as two
messages (request/answer). In this Index total messages are counted. Transactions Per Second
(TPS) are equivalent to two Diameter messages (request/answer), so to derive TPS, divide MPS
in half.
21
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
22/23
LTE Diameter Signaling Index
ANNEX B – Diameter Interfaces in the LTE Core
Interface Network Location and Function
Sh Allows subscriber data exchange between a SIP Application Server (AS) and the HSS.
Dh Connects the SIP AS to the Subscriber Location Function (SLF) to identify the subscriber’s HSS.
SdConnects the PCRF to the newly-defined Traffic Detection Function (TDF), where it is used to identify what
services subscribers are connecting to, and applying rules from the PCRF to those sessions.
Sy Connects the PCRF and OCS for real-time billing, for example, in quota management.
RfCharging data exchange between AS and OFCS for non-real-time billing when a chargeable event
concludes.
Ro Connects network elements to the OCS for real-time billing.
Cx Authenticates users and allows subscriber data and location exchange between CSCF and HSS.
DxSupplies location data between CSCF and SLF to identify the subscriber’s HSS.
Sp Provides a subscriber’s policy information from PCRF to the SPR.
RxRuns between an AF such as a P-CSCF and the PCRF for exchange of IP filtering information for service data
flow, and QoS criteria for bandwidth control.
GxRuns between the PCRF and the PCEF to exchange data from the PCRF to the enforcement points during
data session negotiation.
GyConnects various PCEF enforcement points (such as GGSNs, PDN gateways and MMEs) to send real-time
billing information to the OCS.
GzConnects various PCEF enforcement points (such as GGSNs, PDN gateways and MMEs) to send non-real
time billing information to the OFCS.
Gmb Connects the 3G GGSN and the Broadcast-Multicast Service Center (BM-SC), used for controlling bearerchannels used in mobile video services.
SGmbConnects the 4G PDN Gateway (PGW) and the Broadcast-Multicast Service Center (BM-SC), used for
controlling bearer channels used in mobile video services.
S6aExchanges subscriber data and location information between MME and HSS, and authenticates the
subscriber device when it connects to the network.
S6bConnects the Authentication, Authorization and Accounting (AAA) Server/Proxy and the Packet Data
Network Gateway (PDN GW) for authentication of devices during a mobile data session.
S6c Connects the PDN Gateway in the subscriber’s home network to a AAA server in a visited network.
S6d Connects the LTE HSS and a 3G SGSN for authentication similar to the S6a interface.
S9Connects a PCRF in the subscriber’s Host Mobile Network (HPLMN (H PCRF)) and a PCRF in the VisitedMobile Network (VPLMN (V PCRF)), allowing for a subscriber’s services to be consistent when roaming
in another network.
S13 Enables identity authentication between MME and the Equipment Identity Register (EIR).
S13’ Connects the SGSN in a 3G network to the EIR, similar to the S13 interface.
GiConnects the 3G GGSN to external IP networks when the subscriber’s SIM must be provisioned by an
Access Point Name (APN), typically when a device connects to a private IP network.
SGiConnects the 4G PGW to external IP networks when the subscriber’s SIM must be provisioned by an APN,
typically when a device connects to a private IP network.
22
-
8/20/2019 Lte Diameter Signaling Index Wp 2100662
23/23
Oracle White Paper
September 2013
Oracle Corporation World Headquarters
500 Oracle Parkway Redwood Shores,
CA 94065 U.S.A.
Worldwide Inquiries:
Phone: +1.650.506.7000
Fax: +1.650.506.7200
oracle.com
Copyright © 2013, Oracle and/or its affiliates. All rights reserved. This document is provided for information
purposes only and the contents hereof are subject to change without notice. This document is not warranted
to be error-free, nor subject to any other warranties or conditions, whether expressed orally or implied in
law, including implied warranties and conditions of merchantability or fitness for a particular purpose. We
specifically disclaim any liability with respect to this document and no contractual obligations are formed
either directly or indirectly by this document. This document may not be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without our prior written permission.
This report contains both statements of fact and future estimates relating to Diameter signaling traffic and
global telecommunications markets and represents our current understanding of these matters. This report
is designed to offer general guidance to these subject matters only and is not intended as a substitute for a
customer’s own judgment or for that of its professional advisors. The information in this report is current only
as of the date of release, and may therefore not contain complete, accurate or timely data.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of
their respective owners.
All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC
International. UNIX is a registered trademark of The Open Group. 0912
http:///reader/full/oracle.comhttp:///reader/full/oracle.com
top related