lpddr3/ddr3 phy - silvacothis phy can support 1.6gbps lpddr3 with 32-bit 1-channel and 1.6gbps ddr3...

This PHY can support 1.6Gbps LPDDR3 with 32-bit 1-channel and 1.6Gbps DDR3 with 32/64-bit 1-channel configurations. It is DFI3.0 compliant with a frequency ratio of 1:2.

LPDDR3/DDR3 PHY

Features • Samsung Foundry 11nm low power CMOS device technology

• Supports 1.6Gbps LPDDR3

• Supports 1.6Gbps DDR3

• Off-chip driver (OCD)

• Support Retention IO

• On-die term (ODT)

• Auto training after Memory initialization

• Gate Training

• Write/Read bit Training

• Power supply

• 1.0V PHY Core Voltage (typical)

HEADQUARTERS 2811 Mission College Blvd., 6th Floor Santa Clara, CA 95054

WWW.SILVACO.COMRev 082020_0171203

JAPAN jpsales@silvaco.com KOREA krsales@silvaco.com TAIWAN twsales@silvaco.com SINGAPORE sgsales@silvaco.com CHINA cnsales@silvaco.com

CALIFORNIA sales@silvaco.comMASSACHUSETTS masales@silvaco.com TEXAS txsales@silvaco.com EUROPE eusales@silvaco.com FRANCE eusales@silvaco.com

For more information, please contact us at IP@silvaco.com.

©Copyright Silvaco, Inc. All rights reserved. Silvaco is a registered trademark of Silvaco, Inc. Samsung Foundry is a trademark of Samsung Electronics Co. Ltd. All other names mentioned herein are trademarks or registered trademark of their respective owners.

All information provided is for reference purposes only and may be changed without notice.

Deliverables• Model and softmacro netlist

• Timing LIB

• DFT Model and netlist

• CIR, GDS2 and LEF.

• Technical Datasheet