listpriceeffectivenovember1,2015 - amazon s3price...2015 november 26, 27 december 24, 25 2016...
Post on 22-Jul-2020
0 Views
Preview:
TRANSCRIPT
List price effective November 1, 2015
2015 Price Book
List price effective November 1, 2015
Tools and RulesService Center Business Hours . . . . . . . . . . . . . . .3Holiday Schedule . . . . . . . . . . . . . . . . . . . . . . . . . .3Ordering Protocol . . . . . . . . . . . . . . . . . . . . . . . . . .3Product Changes . . . . . . . . . . . . . . . . . . . . . . . . . . .4Trademark Use Policy . . . . . . . . . . . . . . . . . . . . . . .5E-Business . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Fax Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . .9
Finish Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Heavy Duty Floor Closers . . . . . . . . . . . . . . . . . . . . .12Offset Hung
27, 127, 427, 327, L27, Q27, HM27, 20Single Acting Center Hung
28, H28, 328, 428, EH28Double Acting Center Hung
30, 40, H40
Shallow Depth Floor Closers . . . . . . . . . . . . . . . . . .23Offset Hung
51, 53, Q51, HM51Single Acting Center Hung
50, 5040Double Acting Center Hung
5020
Specialty Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Duo Chek® Double Acting Floor Closers
10, 12, 15, 16Gate Closers
354, 355, 356, 357, 359Security Closers
SEC27Exterior Gate Closers
1350, 1351
Door Control Accessories . . . . . . . . . . . . . . . . . . . . .35CasterSpecial Cement CasesCover PansApplied StopInstallation Tools
Overhead Concealed Closers . . . . . . . . . . . . . . . . . .37Commodity Grade 608 SeriesArchitectural Grade 700 & 800 SeriesArchitectural Grade 91 Series
Pivots and Pivot Sets . . . . . . . . . . . . . . . . . . . . . . . . .45Offset Pivot Sets
117-1/4, 117, 173, 147, L147, 117-1/2, L117Intermediate PivotsPocket PivotsElectrified Pocket PivotsElectrified Intermediate Pivots
Center Hung Pivot Sets127-3/4, 128-3/4, 370, 117-3/4, H117-3/4,178, 176Center Hung Top PivotsElectrified Center Hung Top Pivots
Checkmate® Stops & Holders . . . . . . . . . . . . . . . . . .55
Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Electromagnetic Door Holder/Releases . . . . . . . . .65
Electrified Closer/Holders . . . . . . . . . . . . . . . . . . . . .67Smok-Chek® VSmok-Chek® VICheckmate® 99
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Table of Contents
CONTENTS PAGE CONTENTS PAGE
2
Rixson and Design®, Uni-Chek®, Smok-Chek®, Duo-Chek® and Checkmate® are registered trademarks of Yale Security Inc. Other products' brand names may be trademarks or registered trademarks of their respectiveowners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Copyright © 2002-2015 Yale Security Inc.All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
3
Tools and Rules
Service Center Business Hours ���������������������������������������������������������������������������
List price effective November 1, 2015
ORDERING PROTOCOL ������������������������������������������������������������������������������������������
Holiday Schedule* ������������������������������������������������������������������������������������������������
Please submit Quick Ship Program Items and Factory Items on separate purchase orders.
If you have a Quote, please include the quote number on the purchase order. Orders without this information may be delayed.
Check all acknowledgements for accuracy.
ASSA ABLOY Door Security Solutions Customer Service Center, Monroe, NC, and Rixson TPS,will be CLOSED on the following holidays:
2015November 26, 27December 24, 25
2016January 1February 15March 25May 30July 1, 4September 5September 30 - INVENTORYNovember 24, 25December 23, 26
*Dates subject to change.
ASSA ABLOY Door Security Solutions Customer Service – Monroe8:00 a.m. – 4:30 p.m. (Eastern)1902 Airport RoadMonroe, NC 28110Telephone Number: (800) 457-5670Fax Number: (800) 221-0489
ASSA ABLOY Door Security Solutions Customer Service – West4226 Transport St.Ventura, CA 93003Tel: 800-283-9988Fax: 800-283-4050
Rixson TPS8:00 a.m. – 4:30 p.m. (Eastern)Telephone Number: (866) 474-9766
4List price effective November 1, 2015
Tools and Rules
Product Additions/Deletions for November, 2015 Price Book ����������������������������
Visit our website at www.rixson.com for current product information.
Additions:91 Series Overhead Concealed Closer
Deletions:0700 Series Overhead Concealed Closer
5
Tools and Rules
List price effective November 1, 2015
Trademark Use Policy: ASSA ABLOY Americas �����������������������������������������������������
The following policy (“Policy”) of ASSA ABLOY Americas (“ASSA ABLOY”), and all of its affiliated group companies (collectively,the “Group Companies”), applies to the use of certain intellectual property of all such Group Companies, including all trademarks,names, logos, product images, and related information (the “ASSA ABLOY Marks”). ASSA ABLOY Marks are proprietary andcritical to the success of ASSA ABLOY and the Group Companies, and may only be used in strict compliance with this Policy.
This Policy covers any person or entity reselling any product of any Group Company with the consent of such Group Company(each, an “Approved Reseller”). Each Approved Reseller has a non-exclusive right to use certain of the ASSA ABLOY Marksrelating to any of the Group Companies for which it is an Approved Reseller, subject to the following conditions:
(1) Approved Reseller’s use of ASSA ABLOY Marks must be truthful, fair, and not misleading;
(2) Approved Reseller’s advertising must clearly indicate that it is advertising of the Approved Reseller, and is not advertising ofASSA ABLOY;
(3) Approved Reseller may not use any ASSA ABLOY Marks as part of or in connection with a domain name;
(4) Approved Reseller’s advertising must not imply or suggest an association between the Approved Reseller and ASSA ABLOYother than that of buyer and seller;
(5) Approved Reseller’s use of ASSA ABLOY Marks must be a positive representation of ASSA ABLOY, the Group Companies,and their products;
(6) Approved Reseller’s trade name must be more predominant on Approved Reseller’s advertising than the ASSA ABLOY Marks;
(7) Approved Reseller’s use of ASSA ABLOY Marks must include the trademark symbol ® or TM, as appropriate, along with thefollowing trademark legend printed in legible text on the Web page or document containing ASSA ABLOY Marks: “[describeASSA ABLOY Marks] are trademarks or registered trademarks of ASSA ABLOY, Inc. or one of its affiliates in the UnitedStates and other countries.”;
(8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and
(9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is an ApprovedReseller (e.g., an Approved Reseller that sells Group Company X products but not Group Company Y products may useGroup Company X trademarks in connection with its sale of Group Company X products, but may not use Group CompanyY trademarks).
ASSA ABLOY reserves the right to review Approved Reseller’s usage of ASSA ABLOY Marks at any time and may:
(a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must be implementedwithin 30 days of written notice to Approved Reseller;
(b) condition the use of ASSA ABLOY Marks on ASSA ABLOY’s prior approval of such use, which approval may be withheld inits sole discretion;
(c) revoke permission to use ASSA ABLOY Marks at any time for any or no reason upon 30 days prior written notice to ApprovedReseller; and
(d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Approved Reseller in the event Approved Reseller isin violation of this Policy, or of any other agreement with ASSA ABLOY or any Group Company. Approved Reseller’s right to useASSA ABLOY Marks in no way conveys to Approved Reseller any proprietary or economic interest in any ASSA ABLOY Marks.
Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and criminal liabilities. ASSA ABLOY will vigorouslyenforce this Policy by seeking all appropriate legal remedies, including, but not limited to, pecuniary damages and injunctive relief.
If there are any questions on this policy, please contact Linda Dean at ldean@assaabloyusa.com or 203-498-5596
6List price effective November 1, 2015
Tools and Rules
Rixson's website at www.rixson.com is the place to go for all your Rixson product information needs. Easy-to-navigatemenus and intuitive icons allow simple and fast access to the latest on new products, as well as the most up-to-datecatalogs, templates and installation instructions.
Another great benefit of the Rixson website is the ability to become an eBusiness member. Access gives you additionalinformation for Rixson account customers only.
Visit wwwwww..rriixxssoonn..ccoomm to sign up for ASSA ABLOY Door Security Solutions eBusiness access. ASSA ABLOY Door Security Solutions Security Consultants provides sales, marketing and support for RRIIXXSSOONN.To sign up for eBusiness, follow the simple instructions listed below. Register today and startenjoying the many benefits!eBusiness offers anytime access to:
• Order Status• Order Check by P.O.• Stock Status Check• Cross Reference Guide• Newsletters• Contact Webmaster• Extended Literature (Price Books, Order Forms)• Fax Program Sign Up• Fax Order Acknowledgement • Fax Invoice
How to sign up for eBusiness access:Step 1: Visit our website at www.rixson.comStep 2: Double-click eBusiness icon (top middle)Step 3: Complete ASSA ABLOY Door Security Solutions eBusiness sign-up form
ASSA ABLOY Door Security Solutions Website and eBusiness ��������������������������
7
Tools and Rules
List price effective November 1, 2015
Would you like to receive your acknowledgements and invoices quickly and efficiently? If so, ASSA ABLOY Door Security Solutions offers the Order Acknowledgement and Invoice FaxProgram. Please see the simple steps below to get signed up today!Requirement: Valid eBusiness User ID and Password. (If you do not have an eBusiness User ID andPassword, please refer to eBusiness Sign-up Section included in this Price Book.)
Step 1: Log into eBusiness.
Step 2: Double-click on “Sign Up for ASSA ABLOY Door Security Solutions Fax Program Now!”Step 3: Fill in appropriate information.Step 4: Click on “Sign up for Fax Program!”
ASSA ABLOY Door Security Solution’s Fax Program ������������������������������������������
8List price effective November 1, 2015
Limited Warranty
Yale Security Inc ® (the “Company”) warrants that its products sold under the Rixson® trade name in the UnitedStates of America are free from defects in workmanship and materials under normal use and service.
This warranty does not cover defects or damage arising from improper installation, lack of or impropermaintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident,unauthorized service, use with unauthorized non-Rixson products or parts, or the effects of erosion, or corrosion onthe finish. This warranty is void if any modification is made to the product regardless of whether the modificationcauses or contributes to the alleged defect. All modifications are made at the risk of the party making themodification.
The only liability of the Company in tort or contract whether under this warranty or otherwise shall be limited to therepair or replacement of any product or component part which shall prove defective as covered by this warranty.
The warranty period after delivery to the original purchaser in all cases is as follows:
Rixson® door controls:Series 27/28, 30/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 yearsElectrified Closer/Holders and Electromagnetic Holder/Releases. . . . . . . . . . 2 yearsAll other Rixson ® products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 years
The Company will not pay for the cost of repair performed other than in accordance with this warranty. Writtennotice of a product or component part believed to be defective as covered by this warranty should be sent to Yale Security Inc., 1902 Airport Road, Monroe, North Carolina 28110, and should include your name and address,an identification of the product or component part and a brief description of the defect. Upon receipt of suchnotice, the Company will inform you where to ship such product or component part, shipping charges prepaid, forexamination and, in the event such examination reveals a defect covered by this warranty, the product will berepaired or replaced.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALLIMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. YALE SECURITY INC. SHALL NOTBE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THEEXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OREXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICHVARY FROM STATE TO STATE.
9List price effective November 1, 2015
Terms and Conditions
ACCEPTANCERixson reserves the right to decline an order, in whole or in part, whenthe type or quantity of goods or creditworthiness of the Purchaser isnot satisfactory to us in our sole and absolute discretion.
Purchase Orders, Quote Requests, Acknowledgements or the likeissued by the Purchaser that have contrary standard terms andconditions are not binding on Rixson, unless such terms andconditions are approved in a separate written agreement by Rixsonauthorized representatives. In the event of an acceptance ofPurchaser’s Purchase Order by Rixson, the Purchaser agrees that suchacceptance is solely conditioned on Purchaser’s acceptance of theterms and conditions set forth in this instrument, regardless of theterms and conditions specified in Purchaser’s Purchase Order. Theterms and conditions in Purchaser’s Purchase Order which conflict withthe terms and conditions of this instrument shall be disregarded andare hereby rejected, and this instrument shall constitute the entireagreement between Rixson and the Purchaser.
In the event that Rixson does not enforce or require strict performanceof any term or condition hereof, or of any other document, instrumentor other agreement relating to goods sold, such lack of enforcement orrequirement of strict performance will not waive, affect or diminish anyright of Rixson to enforce or require strict performance of such term orcondition in the future.
PRICESAll prices are subject to change without notice and are not guaranteed.All shipments will be made at prices in effect at the time of shipment.Possession of this price list does not constitute an agreement to sell.We reserve the right to correct clerical, stenographic and other obviouserrors at any time.
TERMSInvoices dated the 1st through the 15th will be due for 2% discount onthe *10th of the following month. Invoices dated the 16th through the31st will be due for 2% discount on the *25th of the following month.*Net immediately thereafter. (Rixson retains the right to sell or todecline to sell to any Customer for any reason whatsoever that in itsjudgment is deemed sufficient.)
It is understood that Rixson may impose and charge a finance chargewhich is the lesser of one and one-half percent (1-1⁄2%) per month orthe highest rate allowed by law on any amount which becomes pastdue and delinquent. Additionally the Customer shall be responsible forall collection costs, court costs and reasonable attorney’s fees (whereallowed by law) in connection with the recovery of any delinquentamount.
FREIGHTAll orders are shipped FOB factory/warehouse, except as expresslyprovided below. When delivered to the Transportation Company, thePurchaser assumes the risk of loss or damage in transit.
Customer orders with net product value in excess of $3,000.00 will beshipped prepaid by RIXSON’s carrier of choice to a single destinationpoint in the United States.
Customer orders with net product value less than $3,000.00 will beshipped prepaid by RIXSON’s carrier of choice and freight andhandling charges will be added to the customer’s invoice.
A minimum freight and handling charge of $25.00 will be charged onorders with net product value of $600.00 or less.
For orders with net product value greater than $600.00 and less than$3,000.00, freight charges will be calculated as a percentage of the netinvoice value and will be added to Customer’s invoice. The percentageis based on the National U.S. Average On Highway Diesel Fuel Pricesas reported by the US Department of Energy in effect at the beginningof each quarter. On the first Monday of each quarter, the new rate willbe published on the RIXSON and Door Security Solutions extranet and
will go into effect on the 2nd Monday of the quarter. Please refer to theRIXSON distributor extranet for the rate chart and information on thecurrent freight charge percentage. The percentage in effect at the timeof shipment of the order will be charged.
If a customer provides their own freight account # for the freightcharges, RIXSON will apply a handling fee of $25.00 to the invoice.
Expedited shipping options – If the customer requests an expeditedmethod of shipment such as “Next Day Air” the charges will be prepaidby RIXSON and the full rate for the service, as published by the carrier,will be added to the customer’s invoice.
Packing – RIXSON will pack, mark and ship the products according toits standard procedures for shipment, unless the parties agree, inwriting, that RIXSON will comply with any special instructions providedby the customer. Special instructions must be submitted, in writing, attime of order placement. Compliance with special instructions mayresult in an increased price.
MINIMUM ORDERMinimum order value for complete product is $250.00 net productvalue. The minimum order value for parts orders is $100.00 net productvalue. In the event that the net product value does not meet therequired net minimum, RIXSON may, at its sole discretion (a) apply aminimum order charge, (b) reject the order or (c) waive the minimumrequirement provided that the waiver of the requirement for one ordershall not constitute a waiver of the requirement for any future orders.
QUOTATIONSIf Rixson elects to offer a quote, such quote will be valid until theexpiration date on that quote. Complete shipment of the order must beaccepted by Purchaser within standard lead times.
The quote number must be referenced on the order. Any invoiced orderthat has the incorrect discount applied to it and did not have the quotenumber written on the order will have a service fee of $100.00 netDEDUCTED from any sales credit issued for the difference in discount.
The quote is null and void if the Purchase Order does not include ALLproduct lines listed on the quote or if the quantities for any itemcovered by the quote deviate by 10% or more. With the issuance andacceptance of a quote for the purchase of products, the Purchaseragrees that products so purchased will not be resold or transferred toany Distributor not authorized by Rixson to sell its products. This wouldbe inclusive of branches of the quoted Distributor. Failure to abide bythis restriction may result in the Distributor’s ineligibility for Quotations,or other actions in Rixson’s discretion.
Rixson and its sales representatives reserve the right, in their solediscretion and for any reason, to refuse a Distributor’s request to quotea price other than Rixson’s standard list price and regardless ofwhether Rixson or its sales representatives have previously quoteddiscounted prices to the Distributor on some or all of its orders.
NON-CATALOGED PRODUCTSProducts not cataloged or listed in this price book will be consideredas special products, and will not be manufactured without prior writtenapproval from Rixson. Non-catalogued products are not subject to buyprograms. Contact factory for pricing. Special products require specialhandling, and therefore standard lead times may not apply. Specialdrawings to correct customer error for product already received, maycarry a $400.00 service charge. This fee must be paid prior to releaseof drawings.
CHANGES/CANCELLATION OF ORDERSChanges or cancellations to an order will result in a charge of costs formaterial and labor expenses that have been incurred prior tonotification from Customer. If products have already been made and orare located in the shipping room, the 45% restocking fee will apply.Handling charges are billed on Customer’s original order. All Non-Cataloged Goods and Rixson Quick Ship Orders may not be changed
10List price effective November 1, 2015
Terms and Conditions
or cancelled. All change requests for goods, other than for the reasonsstated above, must be submitted in writing to Customer Service withintwo (2) business days of receipt of acknowledgment of the order.
ADD-ON ORDERS TO QUOTEAny new order requesting special pricing to match an existing quotenumber, which has already been ordered, will be accepted up to sixty(60) days after the acknowledgement of the original order. All add-onorders must reference the original factory order number and thecorresponding quote number to receive the quoted pricing discount.Add-on orders for stock will not be accepted.
PACKAGINGMany items are defined as to Case Lot Packaging or Minimum Order.The Case Lot policy does not apply to hardware to be used on a specifichardware project.
DELIVERYOrders will be acknowledged and given a scheduled delivery date basedon estimated manufacturing lead times. Complete information is requiredto process all orders. Orders with insufficient information for processing(i.e. door sizes, handing, etc.) may be subject to extended lead timeswhich are relative to the time required in obtaining the necessaryinformation for order processing. Manufacturing lead time will beginonce all information is received to process an order. Rixson will usereasonable efforts to deliver products as estimated, but makes noguarantees as to delivery dates. Rixson will not be liable for backcharges incurred based on availability of product or as a result of delaysin delivery caused by insufficient information required to process anorder. Rixson will not be held responsible for delays in delivery causedby strikes, fires, floods or any other causes beyond our control, includingthe delivery of material to us. Under no circumstances shall Rixson beliable or accountable for consequential damages due to failure ofdelivery.
CLAIMSIn the event of Company or Customer error, claims for shortages, pricingerrors and/or incorrectly filled orders must be submitted in writing toCustomer Service within thirty (30) days from receipt of material.
Any claims for shortages or damage by the Carrier must be made by theCustomer directly to the Carrier.
INVOICE DEDUCTIONA Rixson Sales Representative or Customer Service Representative mustbe notified of any disputed invoices within sixty (60) days from the dateof invoice. Deductions should only be taken for the disputed amount andthe balance of the invoice is due and payable within standard payment terms.
RETURNED GOODSIt is the policy of Rixson to not accept returns of any materials that arecorrectly furnished as per the Distributor’s Purchase Order. Return ofproduct due to customer order error or accommodation must be pre-arranged with Rixson and approved in writing by Sales Management. Allproducts returned as “Goodwill” must meet the following criteria to beconsidered a return:
- Be in original, unmarked and undamaged cartons.- Be valued in excess of $250.00 net.- Shipped and invoiced within the previous 120 days.- Custom, non-cataloged goods, or RIXSON Quick Shipproduct is not returnable.
A MINIMUM restocking fee of 45% will be charged. Upon receipt andverification by Rixson that the returned merchandise meets the foregoingconditions, a credit will be issued for the original invoice amount less theMINIMUM 45% restocking fee. Defective goods and “Goodwill”products that meet the foregoing criteria may be returned by fulfilling thefollowing conditions:
- Send an RGA request in writing to the Rixson Sales Representativeserving the Purchaser’s area.
- Ensure the RGA labels that are sent to Purchaser by Rixson are visibleon return goods shipment.
- Ensure that the RGA number appears on the return shipment label and is legible.
- Return the authorized merchandise within sixty (60) days from the date of RGA issuance date.
- Return shipments must be freight prepaid to the location specified onthe RGA. Rixson is not liable for damages to product during shipping.
No credit may be taken or issued prior to RGA approval and receipt of product.
All defective goods within the terms of our limited warranty may bereturned for credit or replacement.
TAXESPrices do not include any present or future Federal, State, or Localproperty, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or anyservices performed in connection herewith.
GOVERNING LAWThe rights and obligations of the parties shall be governed by the laws of the State of North Carolina, excluding any conflicts of lawprovisions. The United Nations Convention on Contracts for theInternational Sale of Goods shall not apply to this Agreement.
LIMITED WARRANTYThe Terms and Conditions outlined above are subject to Rixson’sLimited Warranty, which is included in this Price List and incorporatedherein by reference.
PRODUCT MODIFICATIONSRIXSON products are not designed or intended for aftermarketmodification. The warranty on RIXSON products becomes void if the product is modified in any way, regardless of whether themodification causes or contributes to any alleged defect. Warrantyvoiding modifications include, but are not limited to, third-partyelectrification of non-electric products and/or the installation of non-approved or non-Rixson components.
If a RIXSON product is modified it no longer meets industry certificationand quality control standards applicable to the original product and is no longer a genuine RIXSON product. A modified product may not besold as a RIXSON product and no RIXSON trademarks or certificationmarks based on the original RIXSON product, such as U.L. or ANSI/BHMAmarks, may appear anywhere on the modified product or on anypackaging, literature, or instructions sold with the modified product.
All original RIXSON packaging and literature that carries RIXSONtrademarks must be destroyed if the original RIXSON product ismodified. Portions of the product that carry a RIXSON trademark orcertification mark must be discarded and/or replaced by the partymaking the modification. U.L. and other certification testing and markingare also the responsibility of the party making modification. The use ofRIXSON trademarks on modified products constitutes trademarkinfringement.
TECHNICAL INFORMATION AND ADVICE(a) All designs, data, and specifications provided by Company areproprietary and will not be disclosed or reused by Customer without theprior written consent of Company; (b) Company assumes no obligationor liability for any advice given by Company, the results obtained, ordamages incurred, and all such advice is given and accepted atCustomer’s risk.
11List price effective November 1, 2015
Finish Symbol Designations ���������������������������������������������������������������������������������
Blackened or hammered finishes are not available.For any other finishes not listed, contact pricing department, 800-457-5670.
* Patch fittings are available in these finishes only.
** BHMA numbers are assigned by base metals on which finish is being applied. For more information see
ANSI A156.18. Appearance should closely match old US numbers.
For finish availability see product "how to order" pages.
Finish Definitions
BHMA** US DESCRIPTION
600 / 674 P PRIME COAT
605* / 632 3 BRIGHT BRASS
606 / 633 4 SATIN BRASS
611 / 637 9 BRIGHT BRONZE
612 / 639 10 SATIN BRONZE
613 / 640 10B DARK BRONZE
613E / 640E 10BE DARK OXIDIZED SATIN BRONZE - EQUIVALENT
618 14 BRIGHT NICKEL
619 15 SATIN NICKEL
622 / 693 19 FLAT BLACK
625 / 651 26 BRIGHT CHROME
626 / 652 26D SATIN CHROME
629* 32 BRIGHT STAINLESS
630* 32D SATIN STAINLESS
689 SPRAYED ALUMINUM
690 SPRAYED DARK BRONZE
691 SPRAYED LIGHT BRONZE
696 SPRAYED BRASS
12
Heav
yDu
tyFl
oorC
lose
rs
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 21
List price effective November 1, 2015
*Finish required, see page 22N = Non-Hold open A = Automatic Hold Open S = Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
Heavy DutyOffset Hung Floor Closers
Heavy Weight/Duty 3/4" Offset �����������������������������������������������������������������������������
ModelComplete CloserSpecify Model,Hand and Degree
LAPSpecify Model,Hand and Degree
Top PivotPkg
Bottom ArmPkg
Floor PlatePkg
CementCase Pkg
27N 27N LAP 180252050R* 274050R*
253000-PKG252050L* 274050L*
$1,457.00 $991.00 $190.00 $101.00 $91.00 $84.00
27S 27S LAP 180252050R* 274750R*
253000-PKG252050L* 274750L*
$1,571.00 $1,105.00 $190.00 $101.00 $91.00 $84.00
F27N 27N LAP F180252050R* 274050R*
253000-PKG252050L* 274050L*
$1,712.00 $991.00 $445.00 $101.00 $91.00 $84.00
27-180N 27-180N LAP 180252050R* 274050R*
253000-PKG252050L* 274050L*
$1,572.00 $1,106.00 $190.00 $101.00 $91.00 $84.00
27-180A 27-180A LAP 180252050R* 274050R*
253000-PKG252050L* 274050L*
$1,686.00 $1,220.00 $190.00 $101.00 $91.00 $84.00
F27-180N 27-180N LAP F180252050R* 274050R*
253000-PKG252050L* 274050L*
$1,827.00 $1,106.00 $445.00 $101.00 $91.00 $84.00
127N 28N LAP 180652050R* 274050R*
253000-PKG652050L* 274050L*
$1,523.00 $983.00 $190.00 $175.00 $91.00 $84.00
127S 28S LAP 180652050R* 274750R*
253000-PKG652050L* 274750L*
$1,637.00 $1,097.00 $190.00 $175.00 $91.00 $84.00
F127N 28N LAP F180652050R* 274050R*
253000-PKG652050L* 274050L*
$1,778.00 $983.00 $445.00 $175.00 $91.00 $84.00
13
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 21
*Finish required, see page 22N = Non-Hold open A = Automatic Hold Open S= Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.
List price effective November 1, 2015
Heavy DutyOffset Hung Floor Closers
HeavyDuty
FloorClosers
Independently Hung (HANGING MEANS AFFECT PRICING AND MUST BE NOTED WHEN ORDERING) �������
Heavy Weight/Duty 3/4" Offset������������������������������������������������������������������������������
27N x 1-1/2OS 27N LAP 180 x1-1/2OS
252060R* 274050R*253000-PKG
252060L* 274050L*
$1,663.00 $991.00 $342.00 $155.00 $91.00 $84.00
27S x1-1/2OS 27S LAP 180 x
1-1/2OS252060R* 274750R*
253000-PKG252060L* 274750L*
$1,777.00 $1,105.00 $342.00 $155.00 $91.00 $84.00
F27N x 1-1/2OS 27N LAP F180 x1-1/2OS
252060R* 274050R*253000-PKG
252060L* 274050L*
$2,040.00 $991.00 $719.00 $155.00 $91.00 $84.00
27 x180N x1-1/2OS 27 x 180N LAP 180 x
1-1/2OS252060R* 274050R*
253000-PKG252060L 274050L*
$1,778.00 $1,106.00 $342.00 $155.00 $91.00 $84.00
27-180A x1-1/2OS 27 x 180A LAP 180 x
1-1/2OS252060R*252060L*
274050R*274050L* 253000-pkg
$1,892.00 $1,220.00 $342.00 $155.00 $91.00 $84.00
F27-180N x1-1/2OS 27-180N LAP F180 x
1-1/2OS252060R* 274050R*
253000-PKG252060L* 274050L*
$2,155.00 $1,106.00 $719.00 $155.00 $91.00 $84.00
Model
CompleteCloser SpecifyModel, Hand andHanging Means
LAP SpecifyModel andHand
Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg
**F327N 327N LAP N/A 3252010-* 3274010R* 253000-PKG3274010L*
$1,537.00 $1,063.00 N/A $299.00 $91.00 $84.00
ModelComplete CloserSpecify Model,Hand and Degree
LAP SpecifyModel,
Hand and Degree
Top PivotPkg
Bottom ArmPkg
Floor PlatePkg
CementCase Pkg
ModelComplete CloserSpecify Model,Hand and Degree
LAPSpecify Model,Hand and Degree
Top PivotPkg
Bottom ArmPkg
Floor PlatePkg
CementCase Pkg
427N 28N LAP 180 x 102652050R* 274050R*
253000-PKG652050L* 274050L*
$1,636.00 $983.00 $303.00 $175.00 $91.00 $84.00
427S 28S LAP 180 x 102652050R* 274750R*
253000-PKG652050L* 274750L*
$1,750.00 $1,097.00 $303.00 $175.00 $91.00 $84.00
Heavy Weight/Duty 1-1/2" Offset���������������������������������������������������������������������������
14
Heavy DutyOffset Hung Floor Closers
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 21
List price effective November 1, 2015
*Finish required, see page 22N = Non-Hold open A = Automatic Hold Open S= Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
Extra Heavy Weight/Duty/Lead Lined ALL OTHER DOOR THICKNESSES ������������������������������
Extra Heavy Weight/Duty/Lead Lined 1-3/4" Door ������������������������������������������������
L27N L27N LAP L180252051R* 274050R*
253001-PKG252051L* 274050L*
$2,132.00 $1,375.00 $308.00 $179.00 $91.00 $179.00
L27S L27S LAP L180252051R* 274750R*
253001-PKG252051L* 274750L*
$2,246.00 $1,489.00 $308.00 $179.00 $91.00 $179.00
FL27N L27N LAP FL180252051R* 274050R*
253001-PKG252051L* 274050L*
$2,476.00 $1,375.00 $652.00 $179.00 $91.00 $179.00
L27-180N L27-180N LAP L180252051R* 274050R*
253001-PKG252051L* 274050L*
$2,280.00 $1,523.00 $308.00 $179.00 $91.00 $179.00
L27-180A L27-180A LAP L180252051R* 274050R*
253001-PKG252051L* 274050L*
$2,394.00 $1,637.00 $308.00 $179.00 $91.00 $179.00
FL27-180N L27-180N LAP FL180252051R* 274050R*
253001-PKG252051L* 274050L*
$2,624.00 $1,523.00 $652.00 $179.00 $91.00 $179.00
Model
Complete CloserSpecify Model,Hand andDegree
LAP SpecifyModel,Hand andDegree
Top PivotPkg
Bottom ArmPkg
Floor PlatePkg
CementCase Pkg
Model
Complete CloserSpecify Model,Hand andDegree
LAP SpecifyModel, Handand Degree
TopPivot Pkg
BottomArm Pkg
FloorPlate Pkg
Cement CasePkg
L27N x doorthickness L27N LAP L180 x door
thickness
2" 252052R*2" 252052L*
2-1/4" 252053R*2-1/4" 252053L*2-1/2" 252054R*2-1/2" 252054L*3" 252055R*3" 252055L*
274050R*
253001-PKG
274050L*
$2,456.00 $1,375.00 $465.00 $346.00 $91.00 $179.00
L27S x doorthickness L27S LAP L180 x door
thickness See above274750R*
253001-PKG274750L*
$2,570.00 $1,489.00 $465.00 $346.00 $91.00 $179.00
L27-180N x doorthickness L27-180N LAP L180 x door
thickness See above274050R*
253001-PKG274050L*
$2,604.00 $1,523.00 $465.00 $346.00 $91.00 $179.00
L27-180A x doorthickness L27-180A LAP L180 x door
thickness See above274050R*
253001-PKG274050L*
$2,718.00 $1,637.00 $465.00 $346.00 $91.00 $179.00
Heav
yDu
tyFl
oorC
lose
rs
15
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 21
Heavy DutyOffset Hung Floor Closers
*Finish required, see page 22N=Non Hold Open A=Automatic Hold Open S=Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
List price effective November 1, 2015
HeavyDuty
FloorClosers
Heavy Weight/Duty Quick Install �������������������������������������������������������������������������
Heavy Weight/Duty HM Door and Frame Preps ����������������������������������������������������
Model
CompleteCloser
Specify Model,Hand andDegree
LAP SpecifyModel, Handand Degree
Top Pivot Pkg Bottom ArmPkg
Floor PlatePkg
Cement CasePkg
IntermediatePivot *Cannotbe ordered lessintermediate
pivot
Q27N Q27N LAP 180222050R* 294050R*
253000-PKG M19222050L* 294050L*
$1,946.00 $1,103.00 $190.00 $206.00 $91.00 $84.00 $272.00
Q27S Q27S LAP 180222050R* 294750R*
253000-PKG M19222050L* 294750L*
$2,060.00 $1,217.00 $190.00 $206.00 $91.00 $84.00 $272.00
FQ27N Q27N LAP F180222050R* 294050R*
253000-PKG FM19222050L* 294050L*
$2,508.00 $1,103.00 $445.00 $206.00 $91.00 $84.00 $579.00
QT27N Q27N LAP 180222050R*
N/A 253000-PKG M19222050L*
$1,855.00 $1,103.00 $190.00 $206.00 – $84.00 $272.00
QT27S Q27S LAP 180222050R*
N/A 253000-PKG M19222050L*
$1,969.00 $1,217.00 $190.00 $206.00 – $84.00 $272.00
FQT27N Q27N LAP F180222050R*
N/A 253000-PKG FM19222050L*
$2,417.00 $1,103.00 $445.00 $206.00 – $84.00 $579.00
Model
CompleteCloser SpecifyModel, Hand and
Degree
LAP SpecifyModel, Handand Degree
Hinge Pkg(3 per pkg) Bottom Arm Pkg Floor Plate Pkg Cement Case
Pkg
HM27N &FHM27N 27N LAP 254545*-PK
222050R*HM 274050R*253000-PKG
222050L*HM 274050L*
$1,913.00 $991.00 $541.00 $206.00 $91.00 $84.00
HM27S 27S LAP 254545*-PK222050R*HM 274750R*
253000-PKG222050L*HM 274750L*
$2,027.00 $1,105.00 $541.00 $206.00 $91.00 $84.00
(3 Each)
16
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 21
Heavy DutyOffset Hung Floor Closers
List price effective November 1, 2015
Standard Weight/Duty 180° Swing ������������������������������������������������������������������������
ModelComplete CloserSpecify Modeland Hand
LAP SpecifyModel and Hand Top
Pivot PkgBottomArm Pkg
FloorPlate Pkg
Cement CasePkg
20N 20N LAP 180 252050R* 204050R* 203000252050L* 204050L*
$1,529.00 $1,063.00 $190.00 $101.00 $91.00 $84.00
F20N 20N LAP F180252050R* 204050R*
203000252050L* 204050L*
$1,784.00 $1,063.00 $445.00 $101.00 $91.00 $84.00
Heav
yDu
tyFl
oorC
lose
rs
*Finish required, see page 22N=Non Hold Open A=Automatic Hold Open S=Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
Heavy DutyCenter Hung Floor Closers
17
*Finish required, see page 22N = Non-Hold open A = Automatic Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
Options on page 21
List price effective November 1, 2015
HeavyDuty
FloorClosers
Heavy Weight/Duty Single Acting ������������������������������������������������������������������������
Model
Complete CloserSpecify Model,Hand andDegree
LAP SpecifyModel, Handand Degree
Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg
28N x 554 28N LAP 340 282554284020R*
253000-PKG284020L*
$1,412.00 $983.00 $124.00 $124.00 $97.00 $84.00
28S x 554 28S LAP 340 282554284720R*
253000-PKG284720L*
$1,526.00 $1,097.00 $124.00 $124.00 $97.00 $84.00
28N 28N LAP 340 282026-*284020R*
253000-PKG284020L*
$1,412.00 $983.00 $124.00 $124.00 $97.00 $84.00
28S 28S LAP 340 282026-*284720R*
253000-PKG284720L*
$1,526.00 $1,097.00 $124.00 $124.00 $97.00 $84.00
Heavy DutyCenter Hung Floor Closers
18
Options on page 21
*Finish required, see page 22N = Non-Hold open A = Automatic Hold Open S = Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
Extra Heavy Weight/Duty single acting ���������������������������������������������������������������
List price effective November 1, 2015
Heav
yDu
tyFl
oorC
lose
rs
ModelComplete CloserSpecify Model
Hand and Degree
LAP SpecifyModel Handand Degree
Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg
H28N H28N LAP H340 262022284020R*
253001-PKG284020L*
$2,383.00 $1,142.00 $405.00 $560.00 $97.00 $179.00
H28S H28S LAP H340 262022284720R*
253001-PKG284720L*
$2,497.00 $1,256.00 $405.00 $560.00 $97.00 $179.00
H28N x 587 H28N LAP H340 262587284020R*
253001-PKG284020L*
$2,383.00 $1,142.00 $405.00 $560.00 $97.00 $179.00
H28S x 587 H28S LAP H340 262587284720R*
253001-PKG284720L*
$2,497.00 $1,256.00 $405.00 $560.00 $97.00 $179.00
Heavy DutyCenter Hung Floor Closers
19
Options on page 21
*Finish required, see page 22N=Non Hold Open A=Automatic Hold Open S=Selective Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
List price effective November 1, 2015
HeavyDuty
FloorClosers
Model
Complete CloserSpecify Model,Hand andDegree
LAP SpecifyModel, Hand and
DegreeTop Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement
Case Pkg
328N 328N LAP N/A N/A284020R*
253000-PKG284020L*
$1,164.00 $983.00 – – $97.00 $84.00
328S 328S LAP N/A N/A284720R*
253000-PKG284720L*
$1,278.00 $1,097.00 – – $97.00 $84.00
428N 428N LAP 7494*PK 7495*PK284020R*
253000-PKG284020L*
$1,618.00 $983.00 $266.00 $188.00 $97.00 $84.00
428S 428S LAP 7494*PK 7495*PK284720R*
253000-PKG284720L*
$1,732.00 $1,097.00 $266.00 $188.00 $97.00 $84.00
Patch Fittings/Single Acting �������������������������������������������������������������������������������
Model
Specify Model,Hand, Degreeand Numberof Wires
LAP SpecifyModel, Hand,Degree and
Number of Wires
Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg
EH28N EH28N LAP H340 262022284020R*
253001-PKG284020L*
$2,605.00 $1,364.00 $405.00 $560.00 $97.00 $179.00
EH28S EH28S LAP H340 262022 284720R* 253001-PKG284720L*
$2,719.00 $1,478.00 $405.00 $560.00 $97.00 $179.00
EH28N x 587 EH28N LAP H340 262587284020R*
253001-PKG284020L*
$2,605.00 $1,364.00 $405.00 $560.00 $97.00 $179.00
EH28S x 587 EH28S LAP H340 262587284720R*
253001-PKG284720L*
$2,719.00 $1,478.00 $405.00 $560.00 $97.00 $179.00
Thru-wire/Power Transfer Single Acting������������������������������������������������������������
20
Heavy DutyCenter Hung Floor Closers
Options on page 21
List price effective November 1, 2015
*Finish required, see page 22N = Non-Hold open A = Automatic Hold OpenNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP = Less All Parts
Heavy Weight/Duty Double Acting ������������������������������������������������������������������������
Extra Heavy Weight/Duty Double Acting �������������������������������������������������������������
Model
Complete CloserSpecify Modeland Degree(If Hold Open)
LAP SpecifyModel & Degree(If Hold Open)
TopPivot Pkg
BottomArm Pkg
FloorPlate Pkg
CementCase Pkg
30N 30N LAP 340 302026 304020-* 303000
$1,723.00 $1,249.00 $124.00 $124.00 $128.00 $98.00
30A 30A LAP 340 302026 304020-* 303000
$1,837.00 $1,363.00 $124.00 $124.00 $128.00 $98.00
40N 40N LAP 340 302026 404020-* 403000
$1,771.00 $1,273.00 $124.00 $124.00 $123.00 $127.00
40A 40A LAP 340 302026 404020-* 403000
$1,885.00 $1,387.00 $124.00 $124.00 $123.00 $127.00
Model
Complete CloserSpecify Modeland Degree(If Hold Open)
LAP SpecifyModel & Degree(If Hold Open)
TopPivot Pkg
BottomArm Pkg
FloorPlate Pkg
CementCase Pkg
H40N H40N LAP H340 262022 404020-* 403000
$3,313.00 $2,098.00 $405.00 $560.00 $123.00 $127.00
H40A H40A LAP H340 262022 404020-* 403000
$3,427.00 $2,212.00 $405.00 $560.00 $123.00 $127.00
H40N X 587 H40N LAP H340 262587 404020-* 403000
$3,313.00 $2,098.00 $405.00 $560.00 $123.00 $127.00
H40A X 587 H40A LAP H340 262587 404020-* 403000
$3,427.00 $2,212.00 $405.00 $560.00 $123.00 $127.00
Heav
yDu
tyFl
oorC
lose
rs
Heavy Duty Floor ClosersOptions
21List price effective November 1, 2015
HeavyDuty
FloorClosers
Quick Reference Options �������������������������������������������������������������������������������������
Prefix Description Price
PH
Physically Handicapped 5# of opening force for ADA compliance for interior doors. If used onexterior or fire doors, the low opening force may not be enough to close the door. PH is alsoavailable in 8.5# of opening force. Suffix 8.5# when ordering. Rixson will not be responsible ifexterior or fire doors will not completely close when PH products are supplied.
$0.00
DA Delayed Action holds door open at 70 degrees for up to 40 seconds. DA cannot be ordered withhold open closers. Not available in Models 30 and 40.
$109.00
SC Sealing a closer protects it from moisture. Cement case and closer body are gasketed andfastened together. Closer must be ordered with cement case and shipped at the same time.
$123.00
W Reinforcement bracket that protects door skin for center hung wood doors using arm 282026, 302026. $0.00
Suffix Description Price
Ext Spdl To accommodate special floor conditions, the spindle can be ordered in 1/2” increments up to andincluding 2” longer. Closer must be ordered with longer spindle, it cannot be field adjusted. $112.00
Torx Security screws. Only provided for screws visible. $213.00
CWF Cold weather fluid for temperatures consistently below 0 degrees. $50.00
-20 20 minute UL listing for smoke doors. Do not prefix F. $21.00
8.5# Prefix PH when ordering this light opening force. Rixson will not be responsible if door will notcompletely close when PH products are supplied.
$0.00
SPLO Special layout that may require special templating and/or products
Excludedfrom buyingprogram
Contactfactory forpricing
22
Heavy Duty Floor ClosersAccessories
How To Order
How To Order) ������������������������������������������������������������������������������������������������������
FPrefix
27Model
90Degree ofSwing
NHold Open
x 1/2" Ext SpindleSuffix
x RHHand
x 626Finish
DA DelayedAction
PH LighterSpring(ADA)
F FireRatedDoors
W WoodDoor(centerhung)
27127427327L27Q27QT27HM272028H28328428EH283040H40
859095105
100 – (30 and40 Series)
180 – (20 and27-180 only)
N = Non-HoldOpen
A = AutomaticHold Open
S = SelectiveHold Open
1-1/2OS 1-1/2" Offset2"2-1/4"2-1/2"3"554 Concealed Arm (28)587 H Arm (H28, H40)Ext Spdl Extended Spindle-20 20 Minute label8.5# Optional PH SpringLAP Less All PartsLFP Less Floor PlateLCC Less Cement CaseLTP Less Top PivotCWF Cold Weather Fluid
- Depth for Cover Pan- # of Wires forElectrified Product
TORX Security Screws(Offset Only)
SPLO# Special Layout
Blank (30 & 40)RH Right HandLH Left Hand
605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized
Satin Bronze- Equivalent
618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome
1101 Cement Case for use with expansion joints, (handed) $409.00
79501 Cement Case for use with shallow floors (non-handed) $245.00
25204 Twin Cement Case 1-7/8" Mullion for back to back closers. Must be ordered with closers. $196.00
25304 Twin Cement Case 2" Mullion for back to back closers. Must be ordered with closers. $196.00
846* Cover Pan for 27 closer, specify depth, hand 1-3/4 doors only $605.00
3910* Cover Pan for L27 closer, specify depth, hand 1-3/4 doors only $605.00
2237* Cover Pan for 28 closer x 554 flat arm, specify depth, hand. $605.00
841* Cover Pan for 28 closer, centering arm, specify depth, hand. $605.00
60131 Lock edge applied stop for center hung doors. Specify finish. $65.00
1859001 Quickspotter Installation 25, 27, 28, 30, 40 $87.00
1859501 Quickspotter Installation for Q27 $87.00
* Specify stainless steel or brass
Door Control Accessories �����������������������������������������������������������������������������������
Price
List price effective November 1, 2015
Heav
yDu
tyFl
oorC
lose
rs
} Door ThicknessL Series Product Only
23
*Finish required, see page 30NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or doorthicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.
Shallow DepthOffset Hung Floor Closers
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 29
List price effective November 1, 2015
ShallowDepth
FloorClosers
Standard Weight/Duty 3/4" Offset �����������������������������������������������������������������������
Model
Complete CloserSpecify Model,Hand & Degree(If Hold Open)
LAP SpecifyModel, Hand &
Degree(If Hold Open)
Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement CasePkg
5103NBC5104NBC5105NBC
5103NBC LAP5104NBC LAP5105NBC LAP
180252050R* 4000500R*XXE
4000301252050L* 4000500L*XXE
$1,455.00 $967.00 $190.00 $101.00 $100.00 $97.00
5103ABC5104ABC5105ABC
5103ABC LAP5104ABC LAP5105ABC LAP
180252050R* 4000500R*XXE
4000301252050L* 4000500L*XXE
$1,507.00 $1,019.00 $190.00 $101.00 $100.00 $97.00
F5103NBCF5104NBCF5105NBC
5103NBC LAP5104NBC LAP5105NBC LAP
F180252050R* 4000500R*XXE
4000301252050L* 4000500L*XXE
$1,710.00 $967.00 $445.00 $101.00 $100.00 $97.00
Standard Weight/Duty 1-1/2" Offset ��������������������������������������������������������������������
Model
Complete CloserSpecify Model, Hand &
Degree(If Hold Open)
LAP SpecifyModel, Hand &
Degree(If Hold Open)
Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg CementCase Pkg
5103NBC x 1-1/2OS5104NBC x 1-1/2OS5105NBC x 1-1/2OS
5103NBC LAP5104NBC LAP5105NBC LAP
180 x 1-1/2OS252060R* 4000500R*XXE
4000301252060L* 4000500L*XXE
$1,661.00 $967.00 $342.00 $155.00 $100.00 $97.00
5103ABC x 1-1/2OS5104ABC x 1-1/2OS5105ABC x 1-1/2OS
5103ABC LAP5104ABC LAP5105ABC LAP
180 x 1-1/2OS252060R* 4000500R*XXE
4000301252060L* 4000500L*XXE
$1,713.00 $1,019.00 $342.00 $155.00 $100.00 $97.00
F5103NBC x 1-1/2OSF5104NBC x 1-1/2OSF5105NBC x 1-1/2OS
5103NBC LAP5104NBC LAP5105NBC LAP
F180 x 1-1/2OS252060R* 4000500R*XXE
4000301252060L* 4000500L*XXE
$2,038.00 $967.00 $719.00 $155.00 $100.00 $97.00
Independently Hung (HANGING MEANS AFFECT PRICING AND MUST BE NOTED WHEN ORDERING) �������
ModelComplete Closer
Specify Model, Handand Hanging Means
LAP SpecifyModel & Hand Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement
Case Pkg
**F5303NBC**F5304NBC**F5305NBC
5303NBC LAP5304NBC LAP5305NBC LAP
N/A 3252010-* 4000600-*XXE 4000301
$1,460.00 $967.00 – $299.00 $97.00 $97.00
**F5313NBC**F5314NBC**F5315NBC
5313NBC LAP5314NBC LAP5315NBC LAP
N/A 3252010-* 4000600-*XXE 4000301
$2,090.00 $1,018.00 – $299.00 $97.00 $97.00
Parallel toFrame
Perpendicularto Frame
24
*Finish required, see page 30NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.
Shallow DepthOffset Hung Floor Closers
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 29
List price effective November 1, 2015
Shal
low
Dept
hFl
oorC
lose
rs
25
*Finish required, see page 30NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts
Shallow DepthOffset Hung Floor Closers
Note that all fire rated openings must have a minimum of one intermediate pivot. See page 48Options on page 29
List price effective November 1, 2015
ShallowDepth
FloorClosers
Standard Weight/Duty Quick Install �������������������������������������������������������������������
Model
Complete CloserSpecify Model,Hand & Degree(If Hold Open)
LAP SpecifyModel, Hand &
Degree(If Hold Open)
Top PivotPkg
Bottom ArmPkg Floor Plate Pkg Cement
Case PkgIntermediate
Pivot
Q5103NBCQ5104NBCQ5105NBC
Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP
180222050R* 4000501R*XXE
4000301 M19222050L* 4000501L*XXE
$1,892.00 $1,030.00 $190.00 $206.00 $97.00 $97.00 $272.00
Q5103ABCQ5104ABCQ5105ABC
Q5103ABC LAPQ5104ABC LAPQ5105ABC LAP
180222050R* 4000501R*XXE
4000301 M19222050L* 4000501LXXE*
$1,944.00 $1,082.00 $190.00 $206.00 $97.00 $97.00 $272.00
FQ5103NBCFQ5104NBCFQ5105NBC
Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP
F180222050R* 4000501R*XXE
4000301 FM19222050L* 4000501L*XXE
$2,454.00 $1,030.00 $445.00 $206.00 $97.00 $97.00 $579.00
QT5103NBCQT5104NBCQT5105NBC
Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP
180222050R*
N/A 4000301 M19222050L*
$1,795.00 $1,030.00 $190.00 $206.00 – $97.00 $272.00
QT5103ABCQT5104ABCQT5105ABC
Q5103ABC LAPQ5104ABC LAPQ5105ABC LAP
180222050R*
N/A 4000301 M19222050L*
$1,847.00 $1,082.00 $190.00 $206.00 – $97.00 $272.00
FQT5103NBCFQT5104NBCFQT5105NBC
Q5103NBC LAPQ5104NBC LAPQ5105NBC LAP
F180222050R*
N/A 4000301 FM19222050L*
$2,357.00 $1,030.00 $445.00 $206.00 – $97.00 $579.00
26
*Finish required, see page 30NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts
Shallow DepthOffset Hung Floor ClosersNote that all fire rated openings must have a minimum of 3 hinges.
Options on page 29
List price effective November 1, 2015
Shal
low
Dept
hFl
oorC
lose
rs Standard Weight/Duty HM Door and Frame Preps ����������������������������������������������
Model
Complete CloserSpecify Model,Hand & Degree(If Hold Open)
LAP Specify Model,Hand & Degree(If Hold Open)
Hinge Pkg(3 per pkg)
BottomArm Pkg
FloorPlate Pkg
CementCase Pkg
HM5103NBCHM5104NBCHM5105NBC
5103NBC LAP5104NBC LAP5105NBC LAP
254545*PK222050R*HM 4000501R*XXE
4000301222050L*HM 4000501L*XXE
$1,908.00 $967.00 $541.00 $206.00 $97.00 $97.00
HM5103ABCHM5104ABCHM5105ABC
5103ABC LAP5104ABC LAP5105ABC LAP
254545*PK222050R*HM 4000501R*XXE
4000301222050L*HM 4000501L*XXE
$1,960.00 $1,019.00 $541.00 $206.00 $97.00 $97.00
FHM5103NBCFHM5104NBCFHM5105NBC
5103NBC LAP5104NBC LAP5105NBC LAP
254545*PK222050R*HM 4000501R*XXE
4000301222050L*HM 4000501L*XXE
$1,908.00 $967.00 $541.00 $206.00 $97.00 $97.00
27
*Finish required, see page 30NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on Pivots applies when Pivots are ordered separatelyLAP= Less All Parts
Shallow DepthCenter Hung Floor Closers
Options on page 29
List price effective November 1, 2015
ShallowDepth
FloorClosers
Standard Weight /Duty Single Acting �����������������������������������������������������������������
Model
Complete CloserSpecify Model,Hand & Degree(If Hold Open)
LAP SpecifyModel, Hand &
Degree(If Hold Open)
Top PivotPkg
Bottom ArmPkg
Floor PlatePkg
Cement CasePkg
5013NBC x 5545014NBC x 5545015NBC x 554
5013NBC LAP5014NBC LAP5015NBC LAP
340 282554 4000600-*XXE 4000301
$1,409.00 $967.00 $124.00 $124.00 $97.00 $97.00
5013ABC x 5545014ABC x 5545015ABC x 554
5013ABC LAP5014ABC LAP5015ABC LAP
340 282554 4000600-*XXE 4000301
$1,461.00 $1,019.00 $124.00 $124.00 $97.00 $97.00
5013NBC5014NBC5015NBC
5013NBC LAP5014NBC LAP5015NBC LAP
340 282026* 4000600-*XXE 4000301
$1,409.00 $967.00 $124.00 $124.00 $97.00 $97.00
5013ABC5014ABC5015ABC
5013ABC LAP5014ABC LAP5015ABC LAP
340 282026* 4000600-*XXE 4000301
$1,461.00 $1,019.00 $124.00 $124.00 $97.00 $97.00
28
*Finish required, see page 30NBC = Non-Hold open with backcheck ABC = Automatic Hold Open with backcheckNote: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts
Shallow DepthCenter Hung Floor Closers
Options on page 29
List price effective November 1, 2015
Shal
low
Dept
hFl
oorC
lose
rs Standard Weight/Duty Double Acting �����������������������������������������������������������������
Model
Complete CloserSpecify Model,Hand & Degree(If Hold Open)
LAP SpecifyModel, Hand &
Degree(If Hold Open)
Top Pivot Pkg Bottom Arm Pkg Floor Plate Pkg Cement CasePkg
5023NBC5024NBC5025NBC
5023NBC LAP5024NBC LAP5025NBC LAP
340 282026* 4000600-*XXE 4000301
$1,475.00 $1,033.00 $124.00 $124.00 $97.00 $97.00
5023ABC5024ABC5025ABC
5023ABC LAP5024ABC LAP5025ABC LAP
340 282026* 4000600-*XXE 4000301
$1,527.00 $1,085.00 $124.00 $124.00 $97.00 $97.00
Patch Fittings Single Acting �������������������������������������������������������������������������������
Model
Complete CloserSpecify Model,Hand & Degree(If Hold Open)
LAP SpecifyModel, Hand &
Degree(If Hold Open)
Top Patch Bottom Patch Floor Plate Cement Case
5043NBC5044NBC5045NBC
5043NBC LAP5044NBC LAP5045NBC LAP
7494*PK 7495*PK 4000600-*XXE 4000301
$1,615.00 $967.00 $266.00 $188.00 $97.00 $97.00
5043ABC5044ABC5045ABC
5043ABC LAP5044ABC LAP5045ABC LAP
7494*PK 7495*PK 4000600-*XXE 4000301
$1,667.00 $1,019.00 $266.00 $188.00 $97.00 $97.00
29
Shallow Depth Floor ClosersOptions
Accessories
List price effective November 1, 2015
ShallowDepth
FloorClosers
Prefix Description Price
PH Physically Handicapped 5# of opening force for ADA compliance for interior doors.Rixson will not be responsible if fire door will not completely close when PH productsare supplied.NOTE: Spring sizes are 2 and 3. See catalog.
$77.00
DA Delayed Action holds door open at 70 degrees for up to 40 seconds. Closers withthis feature will not have backcheck. DA cannot be ordered with hold open closers $129.00
W For center hung wood doors using arm 282026. $0.00
Suffix Description Price
Ext Spdl To accommodate special floor conditions, the spindle can be ordered with longerspindle 1/2" increments up to and including 2" longer. $63.00
Torx Security screws. Only provided for screws visible. $213.00
-20 20 minute UL listing for smoke doors. Do not prefix F. $21.00
SPLO Special layout that may require special templating and/or products
Excluded frombuying programConsult factoryfor pricing
SCSealing a closer protects it from moisture. Cement case and closer body aregasketed and fastened together. Closer must be ordered with cement case andshipped at the same time
$123.00
Quick Reference of Options �������������������������������������������������������������������������������
2637* Cover Pan for 51 closer, specify depth. $887.00
2807D* Cover Pan for 53 closer, specify depth. $887.00
2807B* Cover Pan for 50 closer x 554 flat arm, specify depth.$887.00
2807A* Cover Pan for 50 closer, centering arm, specify depth.$887.00
60131 Lock edge applied stop for center hung doors, specify finish$65.00
1855051 50/51/53 Quickspotter. Quickspotter Installation Tool for 50/51/53$87.00
*Specify stainless steel or brass
Door Control Accessories ����������������������������������������������������������������������������������
Shallow Depth Floor ClosersHow To Order
30List price effective November 1, 2015
Shal
low
Dept
hFl
oorC
lose
rs
FPrefix
510Model
3SpringSize
NBCFunction
x 1-1/2" OffsetSuffix x RH Hand x 626
Finish
SC SealedCloser
DA DelayedAction
PH LighterSpring(ADA)
F FireRatedDoors
W Wd Dr(centerhung)
510 Offset530 Independently
Hung Parallelto Frame
531 IndependentlyHungPerpendicularto Frame
501 Center HungSingle Acting
502 Center HungDouble Acting
504 Center Hungwith PatchFittings
2345
NBC = Non-HoldOpen
ABC = AutomaticHold OpenSpecifyDegree
554 Flat ArmExtendedSpindles
1-1/2" Offset-20 20 Minute
LabelLAP Closer
Body OnlyLFP Less
Floor PlateLCC Less
Cement CaseLTP Less Top
Pivot- Cover Pan(x Depth)
SPLO SpecialLayout #
Blank (5020)RH Right HandLH Left Hand
605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized
Satin Bronze- Equivalent
618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright
Chrome626 Satin Chrome
31
*Finish required, see page 33Note: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Part
Specialty Closers
Options, see page 33
List price effective November 1, 2015
SpecialtyClosers
Duo Chek® Double Acting ���������������������������������������������������������������������������������
ModelComplete CloserSpecify Model
LAP SpecifyModel
Top PivotPkg
Bottom ArmPkg
Floor PlatePkg
Cement CasePkg
1015
10 LAP15 LAP
101020* 102026-* 104020-* 103000*
$981.00 $568.00 $135.00 $97.00 $68.00 $113.00
1216
12 LAP16 LAP
101020* 102026-* 104020- 103000-*
$930.00 $517.00 $135.00 $97.00 $68.00 $113.00
Gate Closers �������������������������������������������������������������������������������������������������������
ModelComplete CloserSpecify Model
LAP SpecifyModel
Top PivotPkg
Bottom ArmPkg
Floor PlatePkg
Cement CasePkg
354
X03540370-*
3541020-* 3542026-* N/A N/A
355 3551020-* 3542026* N/A N/A
$1,207.00 $769.00 $216.00 $222.00 – –
356
X03540370-*
3541020-* 3562020-* N/A N/A
357 3551020-* 3562020* N/A N/A
$1,207.00 $769.00 $216.00 $222.00 – –
359 X03540370-* N/A 3592010-* N/A N/A
$1,208.00 $769.00 – $439.00 – –
Security Closers ������������������������������������������������������������������������������������������������
Model
Complete CloserSpecify Model,Hand & Degree
(SEC27)
LAP SpecifyModel, Hand &Degree (SEC27)
Top Pivot Pkg Bottom Arm Pkg Floor Plate PkgCement Case
Pkg
SEC27-180N 27-180N LAP FA180252056R*
274056*253006R
252056L* 253006L
$2,700.00 $1,114.00 $489.00 $179.00 $621.00 $297.00
Independently Hung
32
Specialty Closers
Options, see page 33
Exterior Gate Closer ����������������������������������������������������������������������������������������
ModelComplete CloserSpecify Model
1350
$462.00
1351
$515.00
List price effective November 1, 2015
Spec
ialty
Clos
ers
*Finish required, see page 33Non-Hold open OnlyNote: Buying program discount on pivots applies when pivots are ordered separately.LAP= Less All Parts
33
Specialty ClosersOptions
How To Order
List price effective November 1, 2015
SpecialtyClosers
Prefix Description Price
PH
Physically Handicapped 5# of opening force in compliance to ADA standard forinterior doors. If used on exterior or fire doors, the low opening force may not beenough to close the door.Not available on gate closers or SEC closers.
$77.00
Suffix Description
Ext Spdl
To accommodate special floor conditions, the spindle can be ordered in 1/2"increments up to and including 2" Closer must be ordered with longer spindle, itcannot be field adjusted.Not available on gate closers.
$63.00
SPLO Special layout that may require special templating and/or products
Excluded frombuyingprograms -contact factoryfor pricing
Quick Reference Options ������������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
Prefix Sec 27Model
NHold Open
x LTPSuffix x RH
Hand
x 689Finish
PH LighterSpring(ADA)
10 Duo Chek(Hold Open)
12 Duo Chek15 Duo Chek
(Hold Open)16 Duo Chek354 Gate355 Gate356 Gate357 Gate359 GateSEC27-180 Security1350 Exterior Gate1351 Exterior Gate
Blank = NotApplicable
N = Non-HoldOpen
1-1/2OS 1-1/2" OffsetExt Spdl Extended
SpindleLAP Less All PartsLFP Less Floor
PlateLCC Less Cement
CaseLTP Less Top
PivotDepth forCover Pan
SPLO# SpecialLayout
Blank(10, 12, 15,16, 354, 355,356, 357, 359)RH Right HandLH Left Hand
605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin
Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome
(Sprayed finishes350 Seriesgate closers only)
689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze693 Sprayed Black -1350
and 1351696 Sprayed Brass
34List price effective November 1, 2015
35
DoorControlAccessories
Door Control Accessories
List price effective November 1, 2015
DoorControlAccessories
*Finish required, stainless steel or brass
Roller Mate® Caster ��������������������������������������������������������������������������������������������
Model Description Price
10600 Single Roller Caster See Page 53
10602 Double Roller Caster See Page 53
10600-025 for 10600
10600-028 for 10602Hollow Metal Reinforced Plate See Page 53
Special Cement Cases ������������������������������������������������������������������������������������������
Model Description Price
1101 Cement Case for use with expansion joints, handed See Page 22
79501 Cement Case for use with shallow floors See Page 22
25204 Twin Cement Case 1-7/8" Mullion for back to backclosers. Must be ordered with closers See Page 22
25304 Twin Cement Case 2" Mullion for back to back closers.Must be ordered with closers. See Page 22
Cover Pans ������������������������������������������������������������������������������������������������������������
Model Description Price
846* Cover Pan for 27 closer, specify depth, hand. 1-3/4 doors only. See Page 22
3910* Cover Pan for L27 closer, specify depth, hand. 1-3/4 doors only See Page 22
2237* Cover Pan for 28 closer x 554 flat arm, specify depth, hand. See Page 22
841* Cover Pan for 28 closer, centering arm, specify depth, hand. See Page 22
841B* Cover Pan for H28 and H28 x 587 arm closers, specify depth, hand. See Page 22
2637* Cover Pan for 51 closer, specify depth, hand. 1-3/4 doors only. See Page 29
2807D* Cover Pan for 53 closer, specify depth, hand. See Page 29
2807B* Cover Pan for 50 closer x 554 flat arm, specify depth, hand. See Page 29
2807A* Cover Pan for 50 closer, centering arm, specify depth, hand. See Page 29
36
Door
Cont
rol
Acce
ssor
ies
Door Control Accessories
List price effective November 1, 2015
Door
Cont
rol
Acce
ssor
ies
Applied Stop ����������������������������������������������������������������������������������������������������������
Model Description Price
60131Specify Finish
Lock edge applied stopfor single acting centerhung doors
See Page 29
Installation Tools ������������������������������������������������������������������������������������������������
Model Description Price
2604 Pivot Alignment ToolSee Page 53
2608 Pivot Alignment Tool for L180, H340 and H345
1859001 27/28/30/40 Quickspotter Installation Tool See Page 22
1859501 Q27 Quickspotter Installation Tool See Page 22
1855051 50/51/53 Quickspotter Installation Tool See Page 29
37
Overhead Concealed ClosersOffset Commodity Grade
*Finish required, sprayed finishes only see page 39 - Arms are sprayed finishes onlyN = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts
Options, see page 39
List price effective November 1, 2015
OverheadConcealed
Closers
Offset Hung ��������������������������������������������������������������������������������������������������������
ModelComplete CloserSpecify Model and
Degree(If Hold Open)
LAP SpecifyModel and Degree(If Hold Open)
MountingBracket/Channel
Top Arm & RailPackage Cover Plate Pkg
0608 608 LAP 608019 06082012-* N/A
$647.00 $414.00 $45.00 $188.00 –
M0608 608 LAP 608049PKG 06082012-* 6084000*
$878.00 $414.00 $171.00 $188.00 $105.00
MW0608 608 LAP 608049PKG 06082012-* 6084000*
$878.00 $414.00 $171.00 $188.00 $105.00
W0608 608 LAP 608049PKG 06082012-* 6084000*
$878.00 $414.00 $171.00 $188.00 $105.00
AW0608 608 LAP 608019 06082012-* N/A
$647.00 $414.00 $45.00 $188.00 –
See model 547 pivot set on page 46 as a method to hang doors.
Pricing for 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or door thicknesses,consult factory. Prices will be affected and will not carry any buy program or quote discounting.
38
Overhead Concealed ClosersCenter Hung Commodity Grade
*Finish required, sprayed finishes only see page 39N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts
Options, see page 39
Center Hung �������������������������������������������������������������������������������������������������������
List price effective November 1, 2015
Over
head
Conc
eale
dCl
oser
s
ModelComplete CloserSpecify Model and
Degree(If Hold Open)
LAP SpecifyModel andDegree (IfHold Open)
MountingBracket/Channel
Top ArmPackage
Bottom PivotPackage
Cover PlatePkg
608EL 608 LAP 608019 6002020 608011A N/A
$652.00 $414.00 $45.00 $65.00 $128.00 –
608SL 608 LAP 608019 608005S 608011A NA
$652.00 $414.00 $45.00 $65.00 $128.00 –
M608 608 LAP 608049PKG 6002020 608011A 6084000*
$883.00 $414.00 $171.00 $65.00 $128.00 $105.00
MW608 608 LAP 608049PKG 6002021 608011A 6084000*
$883.00 $414.00 $171.00 $65.00 $128.00 $105.00
W608 608 LAP 608049PKG 6002021 608011A 6084000*
$883.00 $414.00 $171.00 $65.00 $128.00 $105.00
AW608 608 LAP 608019 6002021 608011A N/A
$652.00 $414.00 $45.00 $65.00 $128.00 –
39
Overhead Concealed ClosersCommodity Grade
OptionsHow to Order
List price effective November 1, 2015
OverheadConcealed
Closers
Suffix Description Price1/2 Ext Spdle Longer spindle for unique head conditions $155.00
Quick Reference of Options �������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
Commodity Grade Closer Model
M608Model
90AHold Openor Not
x 1/2" Ext SpdlSuffix
x 626Finish
Offset Hung0608 Aluminum Dr & FrM0608 Metal Dr & FrMW0608 Wood Dr & Metal FrW0608 Wood Dr and FrAW0608 Wood Dr and Alum FrCenter Hung608EL End Load Arm Alum Dr & Fr608SL Side Load Arm Alum Dr & FrM608 Metal Dr & FrMW608 Wood Dr & Metal FrW608 Wood Dr & FrAW608 Wood Dr and Alum Fr
90A Hold Open105A Hold OpenN Non-Hold
Open
1/2" ExtendedSpindle
605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin
Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin ChromeFor Arms Only689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass
40
Overhead Concealed ClosersOffset Architectural Grade
Offset Hung ���������������������������������������������������������������������������������������������������������
Complete CloserSpecify Handand Finish
689/690/691/693/696/613E 626 605/606/612/613/
618/619/625
PH91N$906.00 $1,290.00 $1,396.00
91N
PH91H$926.00 $1,310.00 $1,416.00
91H
WPH91N$1,006.00 $1,390.00 $1,496.00
W91N
WPH91H$1,026.00 $1,410.00 $1,516.00
W91H
Less All PartsSpecify Handand Finish
689/690/691/693/696/613E 626 605/606/612/613/
618/619/625
PH91N LAP
$748.00 $970.00 $1,032.00
91N LAP
PH91H LAP
91H LAP
PH91N LAP
91N LAP
PH91H LAP
91H LAP
List price effective November 1, 2015
Over
head
Conc
eale
dCl
oser
s
Options, see page 43
*Finish required, see page 43N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts
See model 547 pivot on page 46 as a method to hang doors.
Pricing for 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or door thicknesses,consult factory. Prices will be affected and will not carry any buy program or quote discounting.
41
Overhead Concealed ClosersCenter Architectural Grade
*Finish required, see page 43N = Non-Hold open A = Automatic Hold OpenLAP= Less All Parts
Options, see page 43
List price effective November 1, 2015
OverheadConcealed
Closers
Center Hung Single Acting ��������������������������������������������������������������������������������
ModelComplete
Closer SpecifyModel Size,Hand andDegree
LAP SpecifyModel Size,Hand andDegree
MountingBracket/Channel/Plate
Top ArmPackage
Bottom PivotPackage
Cover PlatePackage
706707708
706 LAP707 LAP708 LAP
1639000 8002020 2183020 N/A
$1,665.00 $1,346.00 $53.00 $112.00 $154.00 –
M706M707M708
706 LAP707 LAP708 LAP
1929000 8002020 2183020
7004000R
7004000L*
$1,928.00 $1,346.00 $163.00 $112.00 $154.00 $153.00
MW706MW707MW708
706 LAP707 LAP708 LAP
1929000 8002021 2183020
7004000R*
7004000L*
$1,963.00 $1,346.00 $163.00 $147.00 $154.00 $153.00
W706W707W708
706 LAP707 LAP708 LAP
1989000 8002021 2183020
7004000R*
7004000L*
$1,963.00 $1,346.00 $163.00 $147.00 $154.00 $153.00
42
Overhead Concealed ClosersCenter Hung Architectural Grade
*Finish required, see page 43N = Non-Hold open A = Automatic Hold OpenLAP = Less All Parts
Options, see page 43
List price effective November 1, 2015
Over
head
Conc
eale
dCl
oser
s
Center Hung Double Acting �������������������������������������������������������������������������������
ModelComplete
Closer SpecifyModel Sizeand Degree
LAP SpecifyModel Sizeand Degree
MountingBracket/Channel/Plate
Top ArmPackage
Bottom PivotPackage
Cover PlatePackage
806807808
806 LAP807 LAP808 LAP
1639000 8002020 2183020 N/A
$1,665.00 $1,346.00 $53.00 $112.00 $154.00 –
M806M807M808
806 LAP807 LAP808 LAP
1929000 8002020 2183020 8004000*
$1,931.00 $1,346.00 $163.00 $112.00 $154.00 $156.00
MW806MW807MW808
806 LAP807 LAP808 LAP
1929000 8002021 2183020 8004000*
$1,966.00 $1,346.00 $163.00 $147.00 $154.00 $156.00
W806W807W808
806 LAP807 LAP808 LAP
1989000 8002021 2183020 8004000*
$1,966.00 $1,346.00 $163.00 $147.00 $154.00 $156.00
43
Overhead Concealed ClosersArchitectural Grade
OptionsHow to Order
List price effective November 1, 2015
OverheadConcealed
Closers
Suffix Description Price
1/2 Ext Spdle Longer spindle for unique frame conditions $327.00
199 Decorative end caps for center hung wood doors (608, 700 & 800 models only) $80.00
SPLO Special templating and products Excluded frombuying programs- contact factoryfor pricing
How To Order ��������������������������������������������������������������������������������������������������������
Architectural Grade Closer Models 700 & 800
M706Model (specify spring size 6, 7, or 8)
90ADegree
x 1/2" Ext SpdlSuffix
x RHHand
x 626Finish
Single Acting Center Hung700 Aluminum Dr. & FrM700 Metal Dr & FrMW700 Wood Dr & Metal FrW700 Wood Dr & FrDouble Acting Center Hung800 Aluminum Dr & FrM800 Metal Dr & FrMW800 Wood Dr & Metal FrW800 Wood Dr & Fr
90A HoldOpen
105A HoldOpen
90N Non-HoldOpen
105N Non-HoldOpen
1/2" ExtendedSpindle
SPLO SpecialMaterialLayout
Blank Dbl ActingRH Right HandLH Left Hand
605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin
Bronze - Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin ChromeALL ARMS689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass
Architectural Grade Closer Model 91
W91 (Model) N (Function)x 1/2"
Extended Spdl(Suffix)
x RHHand
x 626Finish
91 - 3-6 SpringPH - 1-3 SpringW - Wood Frame
N - Non-HoldOpenH - Hold Open
1/2" ExtendedSpindle
RH Right HandLH Left Hand
689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze693 Sprayed Black696 Sprayed Brass605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin
Bronze - equivalent618 Bright Nickel619 Satin Nickel625 Bright Chrome626 Satin Chrome
44List price effective November 1, 2015
45
Pivots and Pivot SetsOffset Hung Pivot Sets
Options on page 53
*Finish required, see page 53
List price effective November 1, 2015
Pivots&
PivotSets
Offset Hung Pivot Sets �������������������������������������������������������������������������������������
Model Description Painted Plated
117-1/4 3/4 Offset (includes 180 top pivot) N/A $405.00
117 3/4 Offset (includes 180 top pivot) N/A $405.00
117 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $676.00
F117 Fire rated 3/4 Offset (includes F180 top pivot) $423.00 $712.00
F117 x 1-1/2OS Fire rated 1-1/2 Offset (includes F180 top pivot) $655.00 $1,062.00
117-20 3/4 Offset x 20 min (includes 180 - 20 top pivot) N/A $421.00
173 3/4 Offset (includes 180 top pivot) N/A $271.00
147 3/4 Offset (includes 180 top pivot) N/A $573.00
147 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $787.00
F147 Fire rated 3/4 Offset (includes F180 top pivot) $603.00 $864.00
F147 x 1-1/2OSFire rated 1-1/2 Offset (includes F180 x 1-1/2OStop pivot) $807.00 $1,151.00
147-20 3/4 Offset x 20 min (includes 180-20 top pivot) N/A $584.00
147-20 x 1-1/2OS 1-1/2 Offset (includes 180-20 top pivot) N/A $793.00
L147 3/4 Offset x1-3/4 door (includes L180 top pivot) N/A $801.00
L147 3/4 Offset x 2, 2-1/4, 2-1/2 or 3 doors (includesL180 top pivot)
N/A $1,157.00
FL147 Fire rated 3/4 Offset x 1-3/4 door (includes FL180top pivot)
$829.00 $1,142.00
L147-20 3/4 Offset x 1-3/4 door (includes L180-20 top pivot) N/A $810.00
46
Pivots and Pivot SetsOffset Hung Pivot Sets
Options on page 53
*Finish required, see page 53
Offset Hung Pivot Sets �������������������������������������������������������������������������������������
Model Description Painted Plated
547 3/4 Offset (includes 2 each M190 intermediatepivots)
N/A $641.00
F547 Fire rated 3/4 Offset (includes 2 each FM190intermediate pivots) $641.00 $903.00
165 3/4 Offset (includes 180 top pivot and 2 each M190intermediate pivots)
N/A $863.00
195 3/4 Offset (includes 180 top pivot) N/A $558.00
F195 Fire rated ¾ Offset (includes F180 top Pivot) N/A $849.00
117-1/2 3/4 Offset (includes 180 top pivot) N/A $854.00
117-1/2 x 1-1/2OS 1-1/2 Offset (includes 180 x 1-1/2OS top pivot) N/A $1,055.00
117-1/2-20 3/4 Offset 20 min (includes 180-20 top pivot) N/A $869.00
F117-1/2 Fire rated 3/4 Offset (includes F180 top pivot) $866.00 $1,062.00
F117-1/2 x 1-1/2OSFire rated 1-1/2 Offset (includes F180 x 1-1/2OStop pivot) $1,081.00 $1,437.00
L117 3/4 Offset x 1-3/4 door (includes L180 top pivot) N/A $1,161.00
L117 3/4 Offset x 2, 2-1/4, 2-1/2 or 3 doors (includesL180 top pivot)
N/A $1,517.00
FL117 Fire rated 3/4 Offset x 1-3/4 door (includes FL180top pivot)
$1,194.00 $1,515.00
L117-203/4 Offset x 20 min x 1-3/4 door (includes L180-20top pivot) N/A $1,180.00
List price effective November 1, 2015
Pivo
ts&
Pivo
tSet
s
47
Pivots and Pivot SetsOffset Hung Top Pivots
Options on page 53
Offset Hung Top Pivot ���������������������������������������������������������������������������������������
Model Description Painted Plated
180 3/4 Offset N/A $190.00
180 x 1-1/2OS 1-1/2 Offset N/A $342.00
H180 3/4 Offset N/A $252.00
H180 x 1-1/2OS 1-1/2 Offset N/A $399.00
F180 Fire rated 3/4 Offset $209.00 $445.00
F180 x 1-1/2OS Fire rated 1-1/2 Offset $352.00 $719.00
FH180 Fire rated 3/4 Offset $272.00 $536.00
180-20 3/4 Offset x 20 min N/A $200.00
180-20 x 1-1/2OS 1-1/2 Offset x 20 min N/A $345.00
H180-20 3/4 Offset x 20 min N/A $266.00
L180 3/4 Offset x 1-3/4 door N/A $308.00
L180 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $465.00
L180-20 3/4 Offset x 20 min x 1-3/4 door only N/A $319.00
FL180 Fire rated 3/4 Offset x 1-3/4 door only $321.00 $652.00
FA180 3/4 Offset $254.00 $489.00
180 x 102 3/4 Offset N/A $303.00
180 x 102 x 1-1/2OS 1-1/2 Offset N/A $300.00
280 3/4 Offset N/A $264.00
F280 Fire rated 3/4 Offset $297.00 $597.00
280-20 3/4 Offset x 20 min N/A $276.00
380 3/4 Offset N/A $264.00
F380 Fire rated 3/4 Offset $297.00 $584.00
380-20 3/4 Offset x 20 min N/A $276.00
L380 3/4 Offset x 1-3/4 door only N/A $444.00
L380 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $615.00
FL380 Fire rated 3/4 Offset x 1-3/4 door only $472.00 $779.00
L380-20 3/4 Offset x 20 min x 1-3/4 door only N/A $457.00
480 3/4 Offset N/A $324.00
F480 Fire rated 3/4 Offset $359.00 $666.00
480-20 3/4 Offset x 20 min N/A $345.00
680 3/4 Offset N/A $355.00
*Finish required, see page 53
List price effective November 1, 2015
Pivots&
PivotSets
48
Note that all fire rated openings must havea minimum of one intermediate pivot
*Finish required, see page 53
Pivots and Pivot SetsIntermediate Pivots
Intermediate Pivots ��������������������������������������������������������������������������������������������
Model Description Painted Plated
M19 3/4 Offset N/A $272.00
M19 x 1-1/2OS 1-1/2 Offset N/A $416.00
FM19 Fire rated 3/4 Offset $300.00 $579.00
FM19 x 1-1/2OS Fire rated 1-1/2 Offset $449.00 $870.00
M190 3/4 Offset N/A $340.00
M190 x 1-1/2OS 1-1/2 Offset N/A $475.00
FM190 Fire rated 3/4 Offset $375.00 $714.00
FM190 x 1-1/2OS Fire rated 1-1/2 Offset $517.00 $866.00
M19-20 3/4 Offset x 20 min N/A $279.00
M19-20 x 1-1/2OS 1-1/2 Offset x 20 min N/A $436.00
M190-20 3/4 Offset x 20 min N/A $347.00
ML19 3/4 Offset x 1-3/4 door only N/A $401.00
ML19 3/4 Offset x 2, 2-1/4, 2-1/2, or 3 doors N/A $570.00
FML19 Fire rated 3/4 Offset x 1-3/4 door only $434.00 $839.00
ML19-20 3/4 Offset x 20 min x 1-3/4 door only N/A $420.00
FA19 3/4 Offset $340.00 $646.00
FA190 3/4 Offset $426.00 $646.00
119 3/4 Offset N/A $206.00
219 3/4 Offset N/A $317.00
219-20 3/4 Offset x 20 min N/A $334.00
319 3/4 Offset N/A $317.00
319-20 3/4 Offset x 20 min N/A $347.00
L319 3/4 Offset x 1-3/4 door only N/A $513.00
L319-20 3/4 Offset x 20 min x 1-3/4 door only N/A $532.00
419 3/4 Offset N/A $370.00
419-20 3/4 Offset x 20 min N/A $386.00
List price effective November 1, 2015
Pivo
ts&
Pivo
tSet
s
49
*Finish required, see page 53
Pivots and Pivot SetsElectrified Intermediate Pivots
& Pocket Pivots
Electrified Intermediate Pivots ����������������������������������������������������������������������
Pocket Pivot ��������������������������������������������������������������������������������������������������������
Model Number Description Price
CSM19 3/4" Offset Monitor PivotElectroLynx not available
$622.00
CSM19 x 1-1/2OS 1-1/2" Offset Monitor PivotElectroLynx not available
$793.00
CSEM19 3/4" Offset Monitor & Power Transfer PivotSpecify number of wires (4, 6, 8,12 for power transfer only)
$864.00
CSEM19 x 1-1/2OS 1-1/2" Offset Monitor & Power Transfer PivotSpecify number of wires (4, 6, 8,12 for power transfer only)
$1,481.00
CSML19 3/4" Offset Monitor Pivot Heavy Weight/High Traffic1-3/4" Door. ElectroLynx not available
$1,134.00
EFM19 Fire Rated 3/4" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12)
$1,053.00
EM19 x 1-1/2OS 1-1/2" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12)
$704.00
EFML19Fire rated 3/4" Offset Power Transfer Pivot Heavy Weight/HighTraffic 1-3/4" Dr.Specify number of wires (4, 6, 8, 12)
$1,592.00
EML193/4" Offset Power Transfer Pivot Heavy Duty/Weight/HighTraffic 1-3/4 DrSpecify number os wires (4, 6, 8, 12)
$1,126.00
EM19U3/4" Offset Power Transfer High Inrush Pivot(2 wires only)ElectroLynx not available
$958.00
EM19 3/4" Offset Power Transfer PivotSpecify number of wires (4, 6, 8, 12)
$497.00
Model Number Description Painted Plated
F519 Pocket Pivot $420.00 $512.00
EF519 Electrified Power Transfer PivotAvailable in 4 wires only NA $950.00
List price effective November 1, 2015
Pivots&
PivotSets
ElectroLynx add $29.00. Specify # of wires (4, 6, 8, 12).
ElectroLynx®
As part of their promise to provide innovative, fast and effective, and higher securitysolutions to their customers, ASSA ABLOY Group companies offer ElectroLynx®, auniversal quick-connect system that simplifies the electrification of the door opening.ElectroLynx® is a registered trademark of ASSA ABLOY, Inc.
50
Options on page 53
*Finish required, see page 53
Pivots and Pivot SetsCenter Hung Pivot Sets
Center Hung Pivot Sets ������������������������������������������������������������������������������������
Model Description Price
127-3/4Center Hung side jamb attached (includes 320top pivot)
$30.00
128-3/4 Center Hung (includes 320 top pivot) $264.00
370 Center Hung (includes 340 top pivot) $391.00
117-3/4 Center Hung (includes 340 top pivot) $804.00
H117-3/4 Center Hung for doors 2" or greater (includes H340 top pivot) $1,962.00
H117-3/4 587 Center Hung for doors 1-3/4 (includes H340 top pivot) $1,962.00
178 Patch fitting pivot (includes 7494 top pivot) $574.00
176 Center Hung Light Duty Pivot $271.00
List price effective November 1, 2015
Pivo
ts&
Pivo
tSet
s
51
Pivots and Pivot SetsCenter Hung Top Pivots
Options on page 53
*Finish required, see page 53
Model Description Price
320 Center Hung $132.00
340 Center Hung $124.00
H340 Center Hung $405.00
345 Center Hung long throw pivot pin $405.00
H345 Center Hung long throw pivot pin $678.00
340 x AP3 Center Hung gate pivot $381.00
320 x 102 Center Hung for deep reveal(No finish plate included)
$248.00
340 x 102 Center Hung for deep reveal(No finish plate included)
$248.00
Center Hung Top Pivots �����������������������������������������������������������������������������������
List price effective November 1, 2015
Pivots&
PivotSets
52
Pivots and Pivot SetsElectrified Center Hung Top Pivots
*Finish required, see page 53
Specify # of wires (4,6,8,12)ElectroLynx add $29.00
Electrified Center Hung Top Pivots ��������������������������������������������������������������
Model Description Price
EH340 Center Hung Heavy Duty for Power Transfer Top Pivot $544.00
EH345 Center Hung Longer Throw Pin Heavy Duty for TallerDoors for Power Transfer
$927.00
CS340Center Hung Heavy Duty for Door Monitoring TopPivotElectroLynx not available
$595.00
CS345Center Hung Longer Throw Heavy Duty for TallerDoors for MonitoringElectroLynx not available
$927.00
List price effective November 1, 2015
Pivo
ts&
Pivo
tSet
s
ElectroLynx®
As part of their promise to provide innovative, fast and effective, and higher securitysolutions to their customers, ASSA ABLOY Group companies offer ElectroLynx®, auniversal quick-connect system that simplifies the electrification of the door opening.ElectroLynx® is a registered trademark of ASSA ABLOY, Inc.
53
Pivots and Pivot SetsOptions
Accessories How To Order
Suffix Description PriceExt Spdl To accommodate special floor conditions, the spindle can be ordered in 1/2"
increments up to and including 2". Pivots must be ordered with longer spindle.Extended spindles for 117-1/4, 117, 147, 547,195, 127-3/4, 128-3/4, 370
$50.00
Extended spindles for 117-1/2, L117, 117-3/4, H117-3/4 and H117-3/4 x 587 $91.00
Longer Pivot Pin For top pivots with special ceiling condition, longer pins are available in 1/4 inchincrements up to 3/4 longer. Not available for electrified pivots
Add $36.00
Torx
Security ScrewsNot available for center hung models
Pivot SetAdd $179.00Intermediate PivotsAdd $117.00
SPLO Special layout that may require special templating and/or productsExcluded from buyingprograms - contactfactory for pricing
Quick Reference Options ������������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
FPrefix
L147Model
x 2-1/4" DoorSuffix
x RHHand
x 626Finish
F Fire RatedDoors
117-1/4117173147L147547165195117-1-1/2L117127-3/4128-3/4370117-3/4H117-3/4178176
1-1/2OS 1-1/2" Offset2"2-1/4" Door Thickness2-1/2" L Series Product Only3"587 H Arm (H117-3/4)Ext Spdl Extended Spindle-20 20 Minute labelLTP Less Top Pivot
# of Wires for ElectrifiedProduct
TORX Security Screws(Offset Only)
SPLO# Special Layout
Blank (CenterHung)
RH RightLH Left
605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin Bronze -
Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass
List price effective November 1, 2015
Pivots&
PivotSets
Accessories �����������������������������������������������������������������������������������������������������������
Model Description Price
10600 Single Roller Caster $619.00
10602 Double Roller Caster $927.00
10600-025 for 10600
10600-028 for 10602Hollow Metal Reinforced Plate $187.00
10600-019 End Cap $24.00
2604
2608 for 180, H340and H345
Pivot Alignment Tool $91.00
}
54List price effective November 1, 2015
55
* Butt hung only** 652 Not available in multi-function models**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means or doorthicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.
Checkmate® Stops and HoldersConcealed Stops and Holders
#1 Series Concealed Heavy Duty ���������������������������������������������������������������������
Options, see page 59
Model Door Opening (inches) Finishes
Friction Hold Open Stop **ButtsOffset Pivots
Center HungPivots
689, 690, 691,696, 652
606, 612,613, 630
605, 611,613E, 619,
618, 622, 629
1-116 1-126 1-136 *24-28 NA
$275.00 $302.00 $454.00
1-216 1-226 1-236 28 1/16-33 30-36
1-316 1-326 1-336 33 1/16-38 36 1/16-41
1-416 1-426 1-436 38 1/16-43 41 1/16-46
1-516 1-526 1-536 43 1/16-48 46 1/16-50
#1ADJ Series Concealed Adjustable Heavy Duty �������������������������������������������
Model Door Opening (inches) Finishes
Hold Open Stop **ButtsOffset Pivots
Center HungPivots
689, 690, 691,696, 652
606, 612,613, 630
605, 611, 613E,619, 618, 622,
6291ADJ-126 1ADJ-136 *24-28 NA
$290.00 $316.00 $476.00
1ADJ-226 1ADJ-236 28 1/16-33 30-36
1ADJ-326 1ADJ-336 33 1/16-38 36 1/16-41
1ADJ-426 1ADJ-436 38 1/16-43 41 1/16-46
1ADJ-526 1ADJ-536 43 1/16-48 46 1/16-50
#2 Series Concealed Adjustable Standard Duty ������������������������������������������
Model Door Opening (inches) Finishes
Friction HoldOpen Stop Multi-
Function**Butts
Offset PivotsCenter Hung
Pivots
652**, 689,690,
691, 696,
606, 612,613, 630
605, 611,613E, 618,
619, 622, 6292-116 2-126 2-136 2-146 *18-24 NA
$124.00 $147.00 $189.00
2-216 2-226 2-236 2-246 24 1/16-30 27-32
2-316 2-326 2-336 2-346 30 1/16-36 32 1/16-38-1/2
2-416 2-426 2-436 2-446 36 1/16-42 38 9/16-45
2-516 2-526 2-536 2-546 42 1/16-48 45 1/16-48
#5 Series Concealed Standard Duty ������������������������������������������������������������������
Model Door Opening (inches) Finishes
Hold Open Stop **ButtsOffset Pivots Center Hung 689, 690, 691, 696, 652
5-126 5-136 *18-24 NA
$115.00
5-226 5-236 24 1/16-30 27-32
5-326 5-336 30 1/16-36 32 1/16-38 1/2
5-426 5-436 36 1/16-42 38 9/16-45
5-526 5-536 42 1/16-48 45 1/16-48
List price effective November 1, 2015
Checkmate
®
Stops&
Holders
56
* Butt hung only** Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.
Checkmate® Stops and HoldersConcealed Stops and Holders
Options, see page 59
#6ADJ Series Concealed Adjustable Low Profile ��������������������������������������������
Model Door Opening (inches) Finishes
Stop **ButtsOffset Pivots
Center HungPivots
689, 690, 691,696
606, 612,613, 630
605, 611, 613E,619, 622, 629
6ADJ-136 *24-28 NA
$396.00 $423.00 $493.00
6ADJ-236 28 1/16-33 30-36
6ADJ-336 33 1/16-38 36 1/16-41
6ADJ-436 38 1/16-43 41 1/16-46
6ADJ-536 43 1/16-48 46 1/16-50
#6 Series Concealed Low Profile �����������������������������������������������������������������������
Model Door Opening (inches) Finishes
Stop **ButtsOffset Pivots
Center HungPivots
689, 690, 691,696
606, 612, 613,630
605, 611, 613E,618, 619, 622,
629
6-136 *24-28 NA
$378.00 $406.00 $471.00
6-236 28 1/16-33 30-36
6-336 33 1/16-38 36 1/16-41
6-436 38 1/16-43 41 1/16-46
6-536 43 1/16-48 46 1/16-50
List price effective November 1, 2015
Chec
kmat
e®
Stop
s&
Hold
ers
57
Checkmate® Stops and HoldersSurface Stops and Holders
**Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.
Options, see page 59
#7 Series Surface Heavy Duty �����������������������������������������������������������������������������
Model Door Opening (inches) Finishes
Friction Hold Open Stop **Butts or Offset Pivots 689, 690,691, 696
NA 7-126 NA 24-30
$278.00NA 7-226 NA 30 1/16-34
NA 7-326 NA 34 1/16-39
NA 7-426 NA 39 1/16-48
#8 HD Series Surface Extra Heavy Duty �������������������������������������������������������
Model Door Opening (inches) Finishes
Hold Open **ButtsOffset Pivots
Center HungPivots
689, 690,691, 696,
606, 612,613, 630
605, 613E,622, 629
8-226 27 1/16-32 1/2 29 9/16-35
$383.00 $414.00 $482.008-326 33 9/16-
38 3/435-1/16-41-1/2
8-426 38 13/16-42 1/2 41 9/16-45
8-526 42 9/16-48 45 1/16-48
Stop
8-236 27 1/16-32 1/2 29 9/16-35
$343.00 $365.00 $431.008-336 33 9/16-
38 3/435 1/16-41 1/2
8-436 38 13/16-42 1/2 41 9/16-45
8-536 42 9/16-48 45 1/16-48
List price effective November 1, 2015
Checkmate
®
Stops&
Holders
58
* Butt hung only** Pricing for Offset 1-3/4 thick doors hung on standard 4-1/2 x 4-1/2 butts or 3/4 offset pivots. For all other hanging means ordoor thicknesses, consult factory. Prices will be affected and will not carry any buy program or quote discounting.
Checkmate® Stops and HoldersSurface Stops and Holders
Options, see page 59
#10 Series Surface Adjustable Standard Duty ��������������������������������������������
Model Door Opening (inches) Finishes
FrictionHoldOpen
StopMulti-
Function**Butts
Offset PivotsCenter Hung
Pivots652*, 689,
690, 691, 696606, 612,613, 630
605, 611, 613E,618, 619, 622,
629
10-116 10-126 10-136 10-146 *18-24 21-26 1/2
$147.00 $154.00 $225.00
10-216 10-226 10-236 10-246 24 1/16-30 26 9/16-32
10-316 10-326 10-336 10-346 30 1/16-36 32 1/16-38 1/2
10-416 10-426 10-436 10-446 36 1/16-42 38 9/16-45
10-516 10-526 10-536 10-546 42 1/16-48 45 1/16-48
#55 Series Surface Standard Duty ���������������������������������������������������������������������
Model Door Opening (inches) Finishes
HoldOpen
Stop **ButtsOffset Pivots Center Hung 689, 690, 691, 696, 652
55-126 55-136 *18-24 NA
$115.00
55-226 55-236 24 1/16-30 27-32
55-326 55-336 30 1/16-36 32 1/16-38 1/2
55-426 55-436 36 1/16-42 38 9/16-45
55-526 55-536 42 1/16-48 45 1/16-48
#9 Series Surface Heavy Duty �����������������������������������������������������������������������
Model Door Opening (inches) Finishes
Friction HoldOpen Stop **Butts
Offset PivotsCenter Hung
Pivots689, 690, 691,696, 652
606, 612,613, 630
605, 611,613E, 618,
619, 622, 629
9-116 9-126 9-136 *24-28 NA
$365.00 $392.00 $457.00
9-216 9-226 9-236 28 1/16-33 30-36
9-316 9-326 9-336 33 1/16-38 36 1/16-41
9-416 9-426 9-436 38 1/16-43 41 1/16-46
9-516 9-526 9-536 43 1/16-48 46 1/16-50
#9ADJ Series Surface Adjustable Heavy Duty ���������������������������������������������
Model Door Opening (inches) Finishes
HoldOpen Stop **Butts
Offset PivotsCenter Hung
Pivots
689, 690,691, 696,
652
606, 612,613, 630
605, 611,613E, 618,
619, 622, 629
9ADJ-126 9ADJ-136 *24-28 NA
$381.00 $409.00 $480.00
9ADJ-226 9ADJ-236 28 1/16-33 30-36
9ADJ-326 9ADJ-336 33 1/16-38 36 1/16-41
9ADJ-426 9ADJ-436 38 1/16-43 41 1/16-46
9ADJ-526 9ADJ-536 43 1/16-48 46 1/16-50
List price effective November 1, 2015
Chec
kmat
e®
Stop
s&
Hold
ers
*652 Not availableon multi-function
holders
59
Checkmate® Stops and HoldersOptions
How To Order
Quick Reference of Options �������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
1Series
3Door SizeSymbol
2Function
6Filler
x LSOptions
x 630Finish
#1 Hvy Dty Concealed#1ADJ Hvy Dty Concealed Adj#2 Std Dty Concealed Adj#5 Std Dty Concealed#6 Low Profile Concealed#6ADJ Low Profile Concealed
Adjustable#7 Surf Cantilever Holder#8HD Extra Hvy Dty Dbl Lever#9 Hvy Dty Surface#9ADJ Hvy Dty Surface Adj#10 Std Dty Surface Adj#55 Std Dty Surface
12345
SeeCatalogfor Sizing
1 Friction2 Holder3 Stop4 Multi
function
LS Less Spring5258 Std Dty Brkt5458 LH Hvy Dty
Brkt5459 RH Hvy Dty
BrktTorx Security
ScrewsARM Arm OnlySPLO# Special Layout
605 Bright Brass606 Satin Brass611 Bright Bronze612 Satin Bronze613 Dark Bronze613E Dark Oxidized Satin Bronze
- Equivalent618 Bright Nickel619 Satin Nickel622 Flat Black625 Bright Chrome626 Satin Chrome629 Bright Stainless630 Satin Stainless652 Satin Chrome on Steel689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass
Suffix Description Price
LS Less Spring Models 1 and 9 only Add $23.00
TORX Security Screws. All Models. Only provided for screws visible. Add $88.00
5458* LH Flush Mounting Brackets Models 8 & 9 $58.00
5459* RH Flush Mounting Brackets Models 8 & 9 $58.00
5258* Flush Mounting Brackets Models 10 & 55 $58.00
SPLO Special layout that may require special templating and/or productsExcluded from buyingprograms - contactfactory for pricing
List price effective November 1, 2015
Checkmate
®
Stops&
Holders
60List price effective November 1, 2015
61
Complete Thresholds
Note that threshold prices include preparations for Rixson floor closers and pivots.Add $100 to threshold prepped for any other manufacturers product
sizes ����������������������������������������������������������������������������������������������������������������������
Types ����������������������������������������������������������������������������������������������������������������������
6"
8"
Type 1, 4, or 3 Type 1, 4, or 3
5"
7"
Type 1
4"
6"
Type 5
3"
5"
800 Profile 700 Profile 600 Profile 500 Profile
Type 5
2"
4"
400 Profile
List price effective November 1, 2015
Thresholds
Materials Sizes Available Single Doorsto 36"
Pair of Doorsto 72" Add Per Inch
Mill Aluminum 400, 500, 600, 700, 800 $594.00 $1,188.00 $16.80
Polished Aluminum 400, 500, 600, 700, 800 $748.00 $1,496.00 $21.20
Mill Bronze 400, 500, 600, 700, 800 $1,629.00 $3,258.00 $47.00
605, 606, 613 on Bronze 400, 500, 600, 700, 800 $2,237.00 $4,474.00 $59.00
Type 1 Type 3 Type 4 Type 5
62
ThresholdsComponent
Note: Threshold prices include preparations for Rixson floor closers and pivotsAdd $100 to threshold prepped for any other manufacturers product
Components ����������������������������������������������������������������������������������������������������������
"A" SECTION
"D" SECTION
"E" SECTION(MITER)
"B"SECTION
Door
Threshold
Floor Material
200 Stop
Size (Width)
List price effective November 1, 2015
Thre
shol
ds
Descriptions Sizes Available PriceA Section Mill Aluminum 400, 500, 600, 700, 800 $16.80 per inch
A Section Polished Aluminum 400, 500, 600, 700, 800 $21.20 per inch
A Section Mill Bronze 400, 500, 600, 700, 800 $46.80 per inch
B Section Mill Aluminum 600, 700, 800 $61.00
B Section Polished Aluminum 600, 700, 800 $77.00
B Section Mill Bronze 400, 500, 600, 700, 800 $168.00
B Section 605, 606, 613 on Bronze 700, 800 $154.00
D Section Mill Aluminum 700, 800 $229.00
D Section Polished Aluminum 700, 800 $303.00
D Section Mill Bronze 700, 800 $532.00
D Section 605, 606, 613 on Bronze 400, 500, 600, 700, 800 $677.00
E Section Mill Aluminum $135.00
E Section Polished Aluminum $156.00
E Section Mill Bronze $179.00
E Section 605, 606, 613 on Bronze $218.00
Floor Material
Threshold
Door
201 Stop
63
ThresholdsOptions
How To OrderNote Threshold prices include preparations for Rixson floor closers and pivots.
Add $100 to threshold prepped for any other manufacturers product
Quick Reference of Options �������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
PH X 3 X 700 X 201 X 36 X 1-3/4 RH 27N AL
Prefix Type Size (width) OptionsOpening(Jamb toJamb)
DoorThickness Hand
Closeror PivotModel
Material
Blank1/2" High
PH1/4" High
1 CenterHung
3 OffsetHung
4 CenterHung
5 OffsetHung
400 3-3/4" (usedwith Type 5or doorswithout floorclosers)
500 4-3/4" (usedwith Type 5or doorswithout floorclosers)
600 5-3/4" (can'tbe used withType 5 orfloor closers)
700 6-3/4"(cannot beused withType 5) or201 stopstrip
800 7-3/4"(cannot beused withType 5)
Abrasive CoatingExtra Miters
(specify qty& location)
MSESMachinescrews andlead shield
201Applied stop
301Step Down(specifylocation)
501Step Down(specifylocation)
Straight Ends(specify qty &location)
Blank PairRH RightLH Left
AL MillAluminum
BZ MillBronze
605 PolishedBrass
606 SatinBrass
613 Bronze
List price effective November 1, 2015
Thresholds
Prefix Description Add
PH 1/4" high - for ADA compliance 700 & 800 only $0.00
Suffix Description
Abrs Ctg Abrasive Coating 50%
Ext Miters Miters in addition to those normally supplied - give quantity and location Consult Factory
MSES Metal Screws and Expansion ShieldsSingle Opening $6.20
Double Opening $12.40
201
Aluminum . ADD $3.30 per inch to list of thresholdBronze . . . . ADD $20.02 per inch to list of threshold605 . . . . . . . ADD $24.09 per inch to list of threshold613 . . . . . . . ADD $28.05 per inch to list of threshold606 . . . . . . . ADD $23.10 per inch to list of threshold
301 Step Down; not available for type 5
Add $10.00 tostandard door
widththresholds$2.00 perextra inch
501 Step Down; not available for type 5
Add $10.00 tostandard door
widththresholds$2.00 perextra inch
Straight Ends Specify length needed if more than 2" Consult Factory
SPLO Special layout that may require special templatingand/or products
Excluded from buying programs -contact factory for pricing
}Cannot beordered with5 type
64List price effective November 1, 2015
65
For higher hold magnets specify single voltage Add $50.00
Electromagnetic DoorHolder/Releases
Electromagnet Door Holder/Releases �������������������������������������������������������������
Model Description Price
980 Floor Mounted $658.00
981 Floor Mounted Back to Back Doors $866.00
989 Low Projection Wall $343.00
990 Low Projection Wall $371.00
991 Hazardous Location Wall $626.00
993 High Hold Wall (with switch)* $721.00
9930 High Hold Floor Mounted (with switch)* $721.00
994 Wall Mounted Adjustable Armature $371.00
996 Surface Mounted $392.00
997 Wall Mounted $371.00
998 Wall Mounted $371.00
999 Universal Wall Mounted $497.00
972H Swinging Door $728.00
972S Sliding Door $728.00
972U Overhead Door $728.00
Options, see page 66
List price effective November 1, 2015
Electromagnetic
DoorHolder/Releases
* With no switch option, deduct $59.00
66
Electromagnetic DoorHolder/Releases
OptionsHow to Order
List price effective November 1, 2015
How To Order ��������������������������������������������������������������������������������������������������������
998Series
x x 689Finish
980 Floor Mounted981 Floor Mounted Back to Back Doors989 Low Projection Wall Mounted990 Low Projection Wall Mounted991 Hazardous Location Mounted993 High Hold Wall Mounted9930 High Hold Floor Mounted994 Wall Mounted Adjustable Armature996 Surface Mounted997 Wall Mounted998 Wall Mounted999 Universal Wall Mounted972H Swinging Door972S Sliding Door972U Overhead/Rolling Door
Blank Tri-volt
For single voltagehigher holding forceproducts specify:24VAC24V/DC12VDC12VAC120VAC
specify 12VDC,24VDC or 120VDC for972H, 972S, or 972U
689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze693 Sprayed Black696 Sprayed Brass
Options �����������������������������������������������������������������������������������������������������������������
Model Description Price
996XK 1-1/2" Wall Extension/conversion kit $91.00
900 Armature Extension Base 1-1/2" $74.00
900-50 1/2" Spacer MUST BE USED WITH 900 BASE $39.00
900-75 3/4" Spacer MUST BE USED WITH 900 BASE $39.00
900-100 1" Spacer MUST BE USED WITH 900 BASE $39.00
2(51)
9900-200 2" Spacer MUST BE USED WITH 900 BASE $49.00
3(76)
9900-300 3" Spacer MUST BE USED WITH 900 BASE $49.00
4(102)
9900-400 4" Spacer MUST BE USED WITH 900 BASE $49.00
5(127)
9900-500 5" Spacer MUST BE USED WITH 900 BASE $49.00
6(157)
900-600 6" Spacer MUST BE USED WITH 900 BASE $49.00
7(178)
9900-700 7" Spacer MUST BE USED WITH 900 BASE $49.00
900-Z 90º Bend Spacer MUST BE USED WITH 900 BASE UNIT $74.00
Elec
trom
agne
ticDo
orHo
lder
/Rel
ease
s
67
ElectrifiedClosers
&Holders
Electrified Closer/HoldersOptions
How to Order
List price effective November 1, 2015
Smok Chek® V �������������������������������������������������������������������������������������������������������
Suffix Description Price
LC Less Closer Deduct $242.00
TORX Torx Screws Add $81.00
550789 550789 Deep Reveal/180º Swing Arm $265.00
Quick Reference of Options �������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
0601Series
x 120VACVoltage
x 550789Options
x 689Finish
0600 Non-Detectored Pull Side Mounting0601 Non-Detectored Push Side Mounting0602 Non-Detectored Holder on Pull
Side/Closer on Push Side0100 Non-Detectored Pull Side Mounting
Holder Only0101 Non-Detectored Push Side Mounting
Holder Only
120VAC24VAC/DC
LC Less Closer BodyTorx Security Screw550789 Arm
689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze693 Sprayed Black696 Sprayed Brass
Model Description Price
0600 Non-Detectored Pull Side Mounting $788.00
0601 Non-Detectored Push Side Mounting $788.00
0602 Non-Detectored Holder on Pull Side Closer on Push Side $788.00
0100 Non-Detectored Pull Side Mounting Holder Only $706.00
0101 Non-Detectored Push Side Mounting Holder Only $706.00
Smok Chek® VI ��������������������������������������������������������������������������������������������������������
Prefix Price
FS Free Swing Arm (Pull Side Only) Add $41.00
DE Double Egress Arm (Pull Side Only) Add $63.00
SuffixTorx Security Screws Add $49.00
Quick Reference of Options �������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
FSPrefix
4 PULLSeries
x 24VDCVoltage
x TorxOptions
x RHHand
x 689Finish
FS FreeSwingArm
DE DoubleEgressArm
4 PULL Non-Detectored Pull Side MountingSelective Hold Open
6 PULL Detectored Pull Side MountingSelective Hold Open
4 PUSH Non-Detectored Push Side MountingSelective Hold Open
6 PUSH Detectored Push Side MountingSelective Hold Open
24VDC120VAC
Torx RH RightLH Left
689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass
Model Description Price
4 PULL Non-Detectored Pull Side Mounting $1,119.00
6 PULL Detectored Pull Side Mounting $2,221.00
4 PUSH Non-Detectored Push Side Mounting $1,119.00
6 PUSH Detectored Push Side Mounting $2,221.00
68Elec
trifie
dCl
oser
s&
Hold
ers
Electrified Closer/HoldersOptions
How to Order
List price effective November 1, 2015Elec
trifie
dCl
oser
s&
Hold
ers
69
ElectrifiedClosers
&Holders
Electrified HoldersHow to Order
List price effective November 1, 2015
CHECKMATE® 99 �����������������������������������������������������������������������������������������������������
How To Order ��������������������������������������������������������������������������������������������������������
99-726Series
x 24VDCVoltage
x 689Finish
99-726 Non-Detectored Push Side Mounting99-626 Detectored Push Side Mounting99-926 Non-Detectored Pull Side Mounting99-826 Detectored Pull Side Mounting
24VAC/DC120VAC
689 Sprayed Aluminum690 Sprayed Dark Bronze691 Sprayed Light Bronze696 Sprayed Brass
Model Description Price
99-726 Non-Detectored Push Side Mounting $448.00
99-626 Detectored Push Side Mounting $1,178.00
99-926 Non-Detectored Pull Side Mounting $448.00
99-826 Detectored Pull Side Mounting $1,178.00
ElectrifiedClosers
&Holders
70List price effective November 1, 2015
List price effective November 1, 2015
2015 Parts Price Book
72
Table of ContentsParts
List price effective November 1, 2015
Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73Heavy Duty Floor Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Offset HungSingle Acting Center HungDouble Acting Center Hung
Shallow Depth Floor Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . .87Offset HungSingle Acting Center Hung Floor CloserDouble Acting Center Hung Floor Closer
Specialty Closers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93Duo Chek® Double Acting Floor ClosersGate ClosersSecurity ClosersExterior Gate Closers
Overhead Concealed Closers . . . . . . . . . . . . . . . . . . . . . . . . . . .99Commodity Grade 608 Series
Offset HungCenter Hung
Architectural Grade 91, 700, 800 SeriesOffset HungSingle Acting Center HungDouble Acting Center Hung
Pivots and Pivot Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111Top PivotsIntermediate PivotsPocket PivotsOffset Hung SetsCenter Hung Sets
Checkmate® Stops & Holders . . . . . . . . . . . . . . . . . . . . . . . . . .122Electromagnetic Door Holder/Releases . . . . . . . . . . . . . . . . . .123Electrified Closer/Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
Smok-Chek® VSmok-Chek® VICheckmate® 99
Contents Page
73
Finish Definitions
List price effective November 1, 2015
Finish Symbol Designations ���������������������������������������������������������������������������������
Blackened or hammered finishes are not available.
For any other finishes not listed, contact pricing department, 800-457-5670.
* Patch fittings are available in these finishes only.
** BHMA numbers are assigned by base metals on which finish is being applied. For more information see
ANSI A156.18. Appearance should closely match old US numbers.
For finish availability see product "how to order" pages.
BHMA** US DESCRIPTION
600 / 674 P PRIME COAT
605* / 632 3 BRIGHT BRASS
606 / 633 4 SATIN BRASS
611 / 637 9 BRIGHT BRONZE
612 / 639 10 SATIN BRONZE
613 / 640 10B DARK BRONZE
613E / 640E 10BE DARK OXIDIZED SATIN BRONZE - EQUIVALENT
618 14 BRIGHT NICKEL
619 15 SATIN NICKEL
622 / 693 19 FLAT BLACK
625 / 651 26 BRIGHT CHROME
626 / 652 26D SATIN CHROME
629* 32 BRIGHT STAINLESS
630* 32D SATIN STAINLESS
689 SPRAYED ALUMINUM
690 SPRAYED DARK BRONZE
691 SPRAYED LIGHT BRONZE
696 SPRAYED BRASS
74
Heav
yDu
tyFloo
rClosers
Heavy-Duty Floor ClosersParts Drawings
List price effective November 1, 2015
Model 27 ���������������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset
(E)(F)
(G)
(H)
(I)
(J)
(K)
*specify finish
(D)
(C)
(A)(L)
(M)
(B)
For 27 x 1-1/2" Offset
1-1/2" Offset Top Pivot180 x 1-1/2"F180 x 1-1/2"Fire Rated180 x 20 x 1-1/220 Minute
SeePage 13
1-1/2" Offset Arm xLocking Screw
275167-*$119.80
1-1/2" Bottom Arm Package252060R*252060L*
SeePage 13
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(C) Arm Cap & Screw012142R*AS (RH, BRS)012142L*AS (LH, BRS)012144R*AS (RH, SS)012144L*AS (LH, SS)
$38.70
(D) 3/4" Offset Arm xLocking Screw
275177 (RH)275176 (LH)
$77.50
(E) Arm Locking Screw Only88905-PKG (5)
$29.00
(F) Arm Shims275065-PKG (5)
$29.00
(G) Arm Bearing Washer275062-PKG (5)
$15.30
(H) Spindle ShoulderCollar 259000-*
$25.60
(L) 3/4" Offset Top PivotAssembly180 (standard)F180 Fire Rated180-20 (20 minutes)
SeePage 47
(M) Bottom Arm Package252050R* (RH)252050L* (LH)Package includes: armlocking screw, arm capand screw, spindleshoulder collar andattaching screws.
SeePage 12
(I) Floor Plate x Screws274050R* (RH)NHO/AHO274050L* (LH)NHO/AHO274750R* (RH) SHO274750L* (LH) SHO
SeePage 12
(J) Closer BodyLAP Specify CompleteModel
SeePage 12
(K) Cement Case x Screws253000-PKG
SeePage 12
Screw Kits
180 Top Pivot Screw Kit107014-* Machine (2) Req107114-* Wood (2) Req
$6.50
Arm Screw Kit107044 Machine107144 Wood
$6.50
Floor Plate Screw Kit107004 -*
$6.50
Cement Case Screw Kit107046
$6.50
75
Heavy-Duty Floor ClosersParts Drawings
Models 127/427 �����������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
*specify finish
(A)(I)
(J)
(B)
(C)
(D)
(G)
(H)
(F)
(E)
Model 427
Heavy-DutyFloorClosers
List price effective November 1, 2015
Screw Kits
180 x 102 Screw Kit107014-* 1 each107114-* 1 each107112-* 1 each107012-* 1 each
$6.50
180 Top Pivot Screw Kit107014-* Machine (2) Req107114-* Wood (2) Req
$6.50
Arm Screw Kit107044 Machine107144 Wood
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107046
$6.50
(I) 3/4" Offset Top Pivot180F180Fire Rated180 x 2020 Minute
SeePage 47
(J) Bottom Arm Package652050R* (RH)652050L* (LH)Includes arm cap andattaching screws
SeePage 12
(E) Spindle ShoulderCollar 259000-*
(F) Floor Plate with Screws274050R* (RH)NHO274050L* (LH)NHO274750R* (RH) SHO274750L* (LH) SHO
SeePage12
(G) Closer Body (SpecifyComplete Model No.x LAP)
SeePage12
(H) Cement Case withScrews253000 - PKG
SeePage12
(A) Pivot Stud181770-ASY $6.30
(B) Hex Cap181778-* $6.70
(C) Arm Cap x Screw Washer12029-*AS $38.70
(D) 3/4" Offset Arm12027 (RH)12028 (LH)
$141.80
(D) 3/4" Offset Arm12027 (RH)12028 (LH)
$141.80
Top Pivot180 x 102
SeePage 47
76
Heav
yDu
tyFloo
rClosers
Heavy-Duty Floor ClosersParts Drawings
Model F327 ������������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(A) Door Rail327006
$74.30
*specify finish
(A)
(C)
(D)
(E)
(B)
Screw Kits
Slide Track Screw Kit107033
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107046
$6.50
(B) Bottom Arm Package3252010-*
SeePage13
(C) Floor Plate withScrews3274010R* (RH)3274010L* (LH)
SeePage13
(D) Closer Body(Specify CompleteModel No. x LAP)
SeePage13
(E) Cement Case withScrews253000-PKG
SeePage13
List price effective November 1, 2015
Heavy-Duty Floor ClosersParts Drawings
Model L27 �������������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(D)
(C)
(B)
(H)
(I)
(J)
*specify finish
(A)(L)
(M)
(E)
(F)
(G)
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(C) Arm Cap & Screw012142R*AS (RH, BRS)012142L*AS (LH, BRS)012144R*AS (RH, SS)012144L*AS (LH, SS)
$38.70
(D) Arm x Locking Screw1-3/4" Door18550-Asy (RH)18650-Asy (LH)
$145.10
(D) Arm x Locking Screw2" Door18551-Asy (RH)18651-Asy (LH)
$320.50
(D) Arm x Locking Screw2-1/4" Door18552-Asy (RH)18652-Asy (LH)
$320.50
(D) Arm x Locking Screw2-1/2" Door18553-Asy (RH)18653-Asy (LH)
$320.50
(D) Arm x Locking Screw3" Door18554-Asy (RH)18654-Asy (LH)
$320.50
(E) Arm Locking Screw Only88905-PKG (5)
$29.00
(F) Spindle Shoulder Collar259500-*
$74.20
(G) Heavy-Duty ThrustBearing41204-PKG (includes41207N spacer)
$82.20
Screw Kits
L180 Screw Kit107016-* Machine (2) Req107116-* Wood (2) Req
$7.40
Arm Screw Kit107048 Machine107144 Wood
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107046
$6.50
For L27 x 3/4" Offset
(L) 3/4" Offset Top PivotF180FL180Fire RatedL180 x 2020 Minute
SeePage 47
(M) Bottom Arm Package1-3/4" Door252051R* (RH)252051L* (LH)2" Door252052R* (RH)252052L* (LH)2-1/4" Door252053R* (RH)252053L* (LH)2-1/2" Door252054R* (RH)252054L* (LH)3" Door252055R* (RH)252055L* (LH)
Package includes: arm, armlocking screw,arm cap andscrew, shoulder collar andattaching screws.
SeePage 14
(I) Floor Plate with Screws274050R* (RH)NHO274050L* (LH)NHO274750R* (RH) SHO274750L* (LH) SHO
SeePage 14
(J) Closer Body (SpecifyComplete Model No.x LAP) includes41204- PKG
SeePage 14
(K) Cement Casewith Screws253001-PKG
SeePage 14
77
Heavy-DutyFloorClosers
List price effective November 1, 2015
78
Heav
yDu
tyFloo
rClosers
Heavy-Duty Floor ClosersParts Drawings
Model Q27/QT27 ����������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(D)
(C)
(B)
(A)
(E)
(F)
(G)
(H)
(R)
(I)
(J)
(P)
(K)
*specify finish
List price effective November 1, 2015
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(C) Arm Cap & Screw73035R*AS (RH)73035L*AS (LH)
$38.70
(D) Arm MountingScrews and Plate73014-*
$6.50
(E) Removable Arm73001R-ASY (RH)73001R-ASY (RH)
$145.10
(F) Arm Locking ScrewOnly - 88905-PKG(5)
$29.00
(G) Arm Washer/ShimPackage - 275179Includes 275065and 275178 TorqueWasher
$29.00
(I) Q27 Styrofoam Filler73009
$29.60
(P) QT Styrofoam Filler73017
$30.90
(R) Spindle ShoulderCollar 259000-*
$25.60
Screw Kits
180 Screw Kit107014-* Machine (2) Req107114-* Wood (2) Req
$6.50
Q Floor Plate Screw Kit107010-*
$6.50
Cement Case Screw Kit107046
$6.50
For Q27/QT27 x 3/4" Offset
(L) 3/4" Offset Top Pivot180F180Fire Rated180 x 2020 Minute
SeePage47
(M) Bottom Arm Package222050R* (RH)222050L* (LH)
Package includes: arm, armlocking screw, arm cap andscrew, arm mounting plate,shoulder collar and attachingscrews
SeePage15
3/4" Offset Intermediate PivotM19FM19M19-20
SeePage48
(N) M19 Intermediate PivotScrew Kit107015-* Machine (2 Req)107115-* Wood (2 Req)
$6.50
(H) Q Floor Plate with Screws294050R* (RH)NHO294050L* (LH)NHO294750R* (RH)SHO294750L* (LH)SHO
SeePage15
(J) Closer Body(Specify CompleteModel No. x LAP)
Seepage15
(K) Cement Case withScrews 253000-PKG
Seepage15
Intermediate Pivot
(N)
79
Heavy-Duty Floor ClosersParts Drawings
Model HM27 ����������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(A)
(L)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
*specify finish
Heavy-DutyFloorClosers
List price effective November 1, 2015
(K)
Screw Kits
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107046
$6.50
Hinge screw kit107519-*
$6.50
(A) Arm Cap & Screw73025R*AS (RH)73025L*AS (LH)
$38.70
(B) Arm Mounting Screwsand Plate73014-*
$6.50
(C) Arm x Set Screw73041R*AS (RH)73041L*AS (LH)
$193.20
(D) Arm LockingScrew Only88905-PKG (5)
$29.00
(E) Arm Shims (5)275065-PKG
$29.00
(F) Arm Bearing Washer275062-PKG-5
$15.30
(G) Spindle ShoulderCollar259000-*
$25.60
(L) Bottom Arm Package222050R*HM (RH)222050L*HM (LH)
Package includes: arm, armlocking screw, arm cap andscrew, arm mounting plate,shoulder collar andattaching screws
SeePage15
(H) Floor Plate with Screws274050R* (RHNHO274050L* (LH)NHO274750R* (RH)SHO274750L* (LH)SHO
SeePage15
(I) Closer Body(Specify CompleteModel No. x LAP)
SeePage15
(J) Cement Casewith Screws253000 - PKG
SeePage15
(K) Special Offset Hinges (3)254545*PK
SeePage15
Heav
yDu
tyFloo
rClosers
Medium-Weight Floor ClosersParts Drawings
Model 20 ���������������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(D)
(E)
(F)(G)
(H)
(I)
(J)
(C)
Screw Kits
180 Screw Kit107014-* Machine (2) Req107114-* Wood (2) Req
$6.50
Arm Screw Kit107044-* Machine (2) Req107144-* Wood (2) Req
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107046
$6.50
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(C) Arm Cap & Screw012142R*AS(RH, BRS)012142L*AS(LH, BRS)012144R*AS(RH, SS)012144L*AS(LH, SS)
$38.70
(D) 3/4" Offset Arm xLocking Screw275177 (RH)275176 (LH)
$77.50
(E) Arm LockingScrew Only88905-PKG (5)
$29.00
(F) Arm Shims275065-PKG (5)
$29.00
(G) Arm BearingWasher275062-PKG (5)
$15.30
(H) Spindle ShoulderCollar259000-*
$25.60
(K)
(A)
(B)
(L) 3/4" Offset Top Pivot180FL180Fire Rated180 - 2020 Minute
SeePage47
(M) Bottom Arm Package252050R* (RH)252050L* (LH)
Package includes: arm, armlocking screw,arm cap andscrew, shoulder collar andattaching screws.
SeePage16
(I) Floor Plate withScrews204050-*
SeePage16
(J) Closer Body (SpecifyComplete Model No.x LAP)
SeePage16
(K) Cement Case withScrews203000
SeePage16
(L)
(M)
80
*specify finish
List price effective November 1, 2015
Heavy-Duty Floor ClosersParts Drawings
Model 28 ���������������������������������������������������������������������������������������������������������������
(D) W28 Wood Door Plate& Shim Pkg (includes46145 & 46445)107066
$59.70
(A)
(B)
(C)
554 Concealed ArmPackage282554 Includes 107064
See Page 17
(P) Bottom arm package283026-* includesE-L and attachingscrews
SeePage 17
Wood Door Arm Package(D, E, F, J)282126
$127.30
(D)
(E)
(F)
(G)
(H)
(I)
(K)
(L)
(M)
(N)
(O)
(J)
340 Top PivotSeePage 51
(A) Jamb Portion3065
$94.80
(B) Finish Plate012202-*PK(BRS)012204-*PK(SS)
$38.70
(C) Door Portion30243
$94.80
(E) Arm Plate Shims (.062)46045-PKG (5)Arm Plate Shims (.187)46145-PKG (5)
$22.00
(F) Arm Plate & Stud Assy46445
$22.00
(G) Arm Spindle Screw01244010-PKG (5)
$10.90
(H) Arm Spindle Washer01030-PKG (5)
$18.60
(I) Arm Set Screw Only26087-PKG (5)
$16.50
(J) Arm & Arm Set Screw282026
$58.60
(K) Arm Alignment Screw &Washer (2) of each107032-*
$28.00
(L) Arm Spindle Collarincluded in arm package)259000-*
$25.60
Screw Kits
340 Screw Kit107329 Machine & Wood
$6.50
Arm Screw Kit107048 Machine107144 Wood
$6.50
554 Arm Screw Kit107064
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107046
$6.50
(M) Floor Plate withScrews284020R* (RH)
NHO284020L* (LH)NHO284720R* (RH)
SHO284720L*(LH) SHO
SeePage17
(N) Closer Body(Specify CompleteModel No. x LAP)
SeePage17
(O) Cement Casewith Screws253000-PKG
SeePage17
Heavy-DutyFloorClosers
81
*specify finish
List price effective November 1, 2015
(P)
Heav
yDu
tyFloo
rClosers
Heavy-Duty Floor ClosersParts Drawings
Model H28 �������������������������������������������������������������������������������������������������������������
(H)
(I)
(J)
(A)
(B)
(C)
(E)
(F)
(G)
262587 includes 107060, 107077,and 107145
See Page 18
587 Side Load Arm PackageFor 1-3/4" Door
H340 Top PivotSeePage 51
(D)
Screw Kits
H340 Screw Kit107329 Machine & Wood
$6.50
587 Arm Screw Kit107077 Machine107145-* Wood
$10.60$6.50
Arm Screw Kit107045 Machine107145 Wood
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107046
$6.50
(A) Jamb Portion308548
$330.20
(B) Finish Plate012202-*PK (BRS)012204-*PK (SS)
$38.70
(C) Door Portion30141
$330.20
(D) Standard End LoadArm Package(minimum 2" doorthickness) 262022includes 107060,107045, and 107145
SeePage18
(E) Arm Spindle Collar259500-*
$74.20
(F) Heavy-Duty ThrustBearing 41204-PKG
$82.20
(G) Arm Shim Kit107060
$8.80
(H) Floor Plate with Screws284020R* (RHNHO284020L* (LH)NHO284720R* (RH)SHO284720L* (LH)SHO
SeePage18
(I) Closer Body(Specify CompleteModel No. x LAP)includes 41204- PKG
SeePage18
(J) Cement Casewith Screws253001 - PKG
SeePage18
82
*specify finish
List price effective November 1, 2015
Heavy-Duty Floor ClosersParts Drawings
(B)
(A)
(H)
(G)
(F)
(C) (D)
(E)
*Model 428 includes patch fittings, toppivot, cement case, closer body and floorplate shown below
Model 328/428 �������������������������������������������������������������������������������������������������������
(D) Top Patch 7494-*PK (includes itemsC & K)
SeePage 19
(E) Bottom Patch7495-* PK (includesitems C & J)
SeePage 19
(F) Floor Plate withScrewsNHO -284020R* (RH)284020L* (LH)SHO-284720R* (RH)284720L* (LH)
SeePage 19
(G) Closer Body(Specify CompleteModel No. x LAP)
SeePage 19
(H) 253000-PKGCement Case withScrews
SeePage 19
Model 428(A) Jamb Portion
42801 $94.80
(B) Finish Plate012202-*PK (BRS)012204-*PK (SS)
$38.70
(C) Door Portion7495 - * $135.20
(J) Bottom Insert Pivot74101
$36.30
(K) Top Pivot Insert74102
$36.30
Heavy-DutyFloorClosers
83
*specify finish
List price effective November 1, 2015
Heav
yDu
tyFloo
rClosers
Heavy-Duty Floor ClosersParts Drawings
Model 30 ���������������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(K)
(L)
(M)
(E)
(D)
(F)
(G)
(H)
(J)
(I)
340 Top PivotSeePage 51
(A) Jamb Portion3065
$94.80
(B) Finish Plate012202-*PK(BRS)012204-*PK(SS)
$38.70
(C) Door Portion30243
$94.80
(E) Arm Plate Shims(.062) 46045-PKG(5) Arm PlateShims (.187)46145-PKG (5)
$22.00
(F) Arm Plate & StudAssy 46445
$22.00
(G) Arm & Arm SetScrew 302026
$101.40
(H) Arm Set ScrewOnly 26087-PKG(5)
$16.50
(I) Arm AlignmentScrew & Washer(2) 107032-*
$28.00
(J) Arm Spindle Collar259000-*
$25.60
(D) W30 Wood Door Plate& Shim PKG (includes46145 & 46445)107066
$59.70
Screw Kits
H340 Screw Kit107329 Machine & Wood
$6.50
Arm Screw Kit107048 Machine107144 Wood
$6.50
Floor Plate Screw Kit(2 required)
107004-*$6.50
Cement Case Screw Kit107014
$6.50
(N) Bottom ArmPackage 302026-*includes E-J andattaching screws
SeePage 20
(K) Floor Plate withScrews (2 parts)304020-*
SeePage 20
(L) Closer Body(Specify CompleteModel No. x LAP)
SeePage 20
(M) Cement Case withScrews303000
SeePage 20
Wood Door Arm Package(D & J)302126
$127.30
84
*specify finish
List price effective November 1, 2015
(N)
Heavy-Duty Floor ClosersParts Drawings
Model 40 ���������������������������������������������������������������������������������������������������������������
(I)
340 Top PivotSeePage 51
(B)
(C)
(K)
(L)
(M)
(E)
(D)
(F)
(G)
(H)
(J)
(A)(A) Jamb Portion3065
$94.80
(B) Finish Plate012202-*PK (BRS)012204-*PK (SS)
$38.70
(C) Door Portion30243
$94.80
(E) Arm Plate Shims (.062)46045-PKG (5)
$22.00
(E) Arm Plate Shims (.187)46145-PKG (5)
$22.00
(F) Arm Plate & Stud Assy46445
$22.00
(G) Arm & Arm Set Screw302026
$101.40
(H) Arm Set Screw Only26087-PKG (5)
$16.50
(I) Arm Alignment Screw& Washer (2)107032-* $28.00
(J) Arm Spindle Collar259000
$25.60
(D) W40 Wood Door Plate& Shim PKG (includes46145 & 46445)107066
$59.70
(N) Bottom ArmPackage 302026-*includes E-J andattaching screws
SeePage 20
(K) Floor Plate withScrews (2 parts)404020-*
SeePage 20
(L) Closer Body(Specify CompleteModel No. x LAP)
SeePage 20
(M) Cement Case withScrews403000
SeePage 20
Screw Kits
340 Screw Kit107329 Machine & Wood
$6.50
Arm Screw Kit107048 Machine107144 Wood
$6.50
Floor Plate Screw Kit(2 required)
107004-*$6.50
Cement Case Screw Kit107014
$6.50
Heavy-DutyFloorClosers
85
*specify finish
List price effective November 1, 2015
Wood Door Arm Package(D & G)302126
$127.30
(N)
Heavy-Duty Floor ClosersParts Drawings
Model H40 �������������������������������������������������������������������������������������������������������������
(H)
(I)
(J)
(A)
(B)
(C)
(E)
(D)
(F)
(G)
587 Side LoadArm Package262587includes107060,107077,107145
SeePage20
For 1-3/4" Door
H340 Top PivotSeePage 51
Heav
y-Du
tyFloo
rClosers
Screw Kits
H340 Screw Kit107329 Machine & Wood
$6.50
587 Arm Screw Kit107077 Machine107145 Wood
$10.60$6.50
Arm Screw Kit107045 Machine107145 Wood
$6.50
Floor Plate Screw Kit(2 required)
107004-*$6.50
Cement Case Screw Kit107014
$6.50
(A) Jamb Portion308548
$330.20
(B) Finish Plate012202-*PK (BRS)012204-*PK (SS)
$38.70
(C) Door Portion30141
$330.20
(D) Standard End LoadArm Package(minimum 2" doorthickness)262022
SeePage20
(E) Arm SpindleCollar259500-*
$74.20
(F) Heavy-DutyThrust Bearing41204-PKG
$82.20
(G) Arm Shim Kit107060
$8.80
(H) Floor Plate with Screws1 Large 1 Small404020 -*
SeePage20
(I) Closer Body(Specify CompleteModel No. x LAP)includes 41204- PKG
SeePage20
(J) Cement Casewith Screws403000
Seepage20
86
*specify finish
List price effective November 1, 2015
ShallowDepth
FloorClosers
Shallow Depth Floor ClosersParts Drawings
For 51 x 1-1/2" Offset
180x1-1/2" (standard)F180x1-1/2"(fire rated up to 3 hours)180-20x1-1/2"(20 minutes)
SeePage 47
1-1/2" Offset Arm xLocking Screw275167-*
$119.80
1-1/2" Offset Bottom Armpkg252060-*
SeePage 24
Model 51 ��������������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset
(L) Spindle AdapterPackage includes shimsocket screw and washer4007-XXA
$113.10
Extended SpindlesSpindle Adapters:
4007-XXC 1/2" extended $173.20
4007-XXE 1" extended $173.20
4007-XXG 1-1/2" extended $173.20
4007-XXI 2" extended $173.20
(A)
(B)
(C)
(D)
(F)
(G) (L)
(H)
(I)
(J)
(K)
(E)
Bottom Arm PackageIncludes arms screw cap, arm lock &lock screw
252050R* (RH) SeePage 23252050L* (LH)
3/4" Offset Top Pivot Assembly
180 (standard)
Seepage 47
F180(fire rated up to 3 hours)
180-20 (20 minutes)
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(C) Arm Cap & Screw012142R*AS (RH, BRS)012142L*AS (LH, BRS)012144R*AS (RH, SS)012144L*AS (LH, SS)
$38.70
(D) 3/4" Offset Arm xLocking Screw275177 (RH)275176 (LH)
$77.50
(E) Arm LockingScrew Only 88905-PKG (5)
$29.00
(G) Arm Bearing Washer275062-PKG (5)
$15.30
(H) Spindle Washer519000-*
$10.80
(H) Floor Plate with Screws4000500R* XXE (RH)4000500L* XXE (LH)
SeePage23
(I) Closer Body(Specify CompleteModel No. x LAP)
SeePage23
(J) Cement Casewith Screws4000301
SeePage23
Screw Kits
180 Screw Kit107014 Machine(2) Req107114 Wood (2) Req
$6.50
Arm Screw Kit107044 Machine107144 Wood
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107075
$6.50
87
*specify finish
List price effective November 1, 2015
Shallow
Depth
Floo
rClosers
Shallow Depth Floor ClosersParts Drawings
Model F5300 & F5310 �������������������������������������������������������������������������������������������
Screw Kits
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107075
$6.50
Slide Track Screw Kit107033
$6.50
(B) Bottom Arm Package3252010-*
SeePage 24
(D) Floor Plate with Screws4000600-*XXA4000600-*XXE (“BC”)
SeePage 24
(E) Closer Body(specify completemodel no. x LAP)
SeePage 24
(F) Cement Casewith Screws4000301
SeePage 24
(A) Door Rail327006
$74.30
(C) SpindleWasher 539000-*
$10.90
(A)
(B)
(C)(D)
(E)
(F)
88
*specify finish
List price effective November 1, 2015
Spindle Adapter Packageincludes socket screw
Extended Spindle Adapters
4009-*XXC 1/2" extended $173.20
4009-*XXE 1" extended $173.20
4009-*XXG 1-1/2" extended $173.20
4009-*XXI 2" extended $173.20
Shallow Depth Floor ClosersParts Drawings
(P) Spindle AdapterPackageincludes shims &washer 4007-XXC
$173.20
Extended SpindlesSpindle Adapters:
4007-XXF 1/2" extended $173.20
4007-XXH 1" extended $173.20
(A)
(B)
(C)
(D)
(F)
(G)
(P)
(I)
(J)
(K)
(N)
(L)
Intermediate Pivot
(M)
(E)
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(C) Arm Cap & Screw73035R*AS (RH,BRS) 73035L*AS(LH, BRS)
$38.70
(D) Q/QT27 ArmMounting Screws &Plate 73014-*
$6.50
(E) Removable Arm73001R-ASY (RH)73001L-ASY (LH)
$145.10
(F) Arm LockingScrew Only88905-PKG (5)
$29.00
(G) Arm Washer and ShimPKG 275179 (includesShim 275065 and275178 TorqueWasher)
$29.00
(I) Spindle Washer519000-X
$10.80
(J) Floor Plate w/Screws4000501R* XXA(RH)4000501L* XXE(LH), "BC”)4000501R* XXE(RH, “BC”)4000501L* XXE(LH, “BC”)4000501R* XXI(RH, “DA”)4000501L* XXI(LH, “DA”)
SeePage25
(K) Q51 Styrofoam Filler4000-023
$55.70
(N) QT51 Styrofoam Filler4000-019
$55.70
(L) Closer Body(Specify completemodel no. x LAP)
SeePage25
(M) Cement Case w/Screws4000301
SeePage25
(L) 3/4" Offset Top Pivot180FL180Fire Rated180 - 2020 Minute
SeePage47
(M) Bottom Arm Package222050R* (RH)222050L* (LH)
SeePage25
(M) 3/4" OffsetIntermediate Pivot (1)M19FM19Fire RatedM19-2020 Minute
SeePage48
Screw Kits
180 Screw Kit107014 Machine(2) Req107114 Wood (2) Req
$6.50
Q Floor Plate Screw Kit107010-*
$6.50
Cement Case Screw Kit107075
$6.50
M19 Intermediate PivotScrew Kit
107015 Machine (2) Req107115 Wood (2) Req
$6.50
Model Q51/QT51 ����������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset
ShallowDepth
FloorClosers
89
*specify finish
List price effective November 1, 2015
Shallow
Depth
Floo
rClosers
Shallow Depth Floor ClosersParts Drawings
Model HM51 ����������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(A)
(B)
(C)(D)
(F)
(G)
(H)
(I)
(J)
(K)
(E)
Special Offset Hinges (3)
254545R*PK (RH) Seepage 26254545L*PK (LH)
(A) Arm Cap & Screw73025R*AS (RH)73025L*AS (LH)
$38.70
(B) HM51 Arm MountingScrews & Plate73014-*
$6.50
(C) Arm Cap & Screw73041R*AS (RH)73041L*AS (LH)
$193.20
(D) Arm LockingScrew Only88905 - (5)
$29.00
(E) Arm Bearing Washer275062-PKG (5)
$29.00
(F) Spindle Washer519000-*
$10.80
Screw Kits
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107075
$6.50
Hinge screw kit107519-*
$6.50
(G) Floor Plate w/Screws4000500R* XXE (RH)4000501L* XXE (LH)4000501R* XXE(RH, “BC”)4000501L* XXE(LH,“BC”)4000501R* XXI(RH, “DA”)4000501L* XXI(LH, “DA”)
SeePage26
(H) Closer Body(Specify completemodel no. x LAP)
SeePage26
(I) Cement case withscrews4000301
SeePage26
(J) Bottom Arm Package222050R*HM (RH)222050L*HM (LH)
SeePage26
(K) Spindle AdapterPackage 4007-XXA
$113.10
Extended SpindlesSpindle Adapters:includes shims & armwasher4007-XXC1/2" extended4007-XXE1" extended4007-XXG1-1/2" extended4007-XXI2" extended
$173.20
90
*specify finish
List price effective November 1, 2015
Shallow Depth Floor ClosersParts Drawings
Model 50 & 5020 ����������������������������������������������������������������������������������������������������
(L) 554 ConcealedArm Package282554
Note: Cannot be usedon model 5020
SeePage 27
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(K)
(M)
(N)
(O)
(L)
(H)
(J)
(I)
(J) Spindle AdapterPackage 4010-XXA
$136.70
Extended SpindlesSpindle Adapters
4010-XXC 1/2" extended $195.70
4010-XXE 1" extended $195.70
4010-XXG 1-1/2" extended $195.70
4010-XXI 2" extended $195.70
340 Top PivotSeePage 51
(A) Jamb Portion3065
$94.80
(B) Finish Plate012202-*PK(BRS)012204-*PK(SS)
$38.70
(C) Door Portion30243
$94.80
(D) W28 Wood DoorPlate/Shim Pkg(includes 46145 &46445)107066Wood door armpkg. 282126
$59.70
(E) Arm Plate Shims (.062)46045-PKG (5)Arm Plate Shims (.187)46145-PKG (5)
$22.00
(F) Arm Plate & Stud Assy46445
$22.00
(G) Arm & ArmSet Screw282026
$58.60
(H) Arm SetScrew Only26087-PKG (5)
$16.50
(I) Arm AlignmentScrew & Washer(107032 -*)
$28.00
(K) Spindle Washer519000-*
$10.80
Screw Kits
554 Arm Screw Kit107064
$6.50
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107075
$6.50
340 Screw Kit107329 Machine& Wood
$6.50
Arm Screw Kit107048 Machine107144 Wood
$6.50
(M) Floor Plate withScrews4000600-*XXE BC”)4000600-*XXI(“DA”)
SeePage 27or 28
(N) Closer Body(Specify CompleteModel No. x LAP)
SeePage 27or 28
(O) Cement Case withScrews4000301
SeePage 27or 28
(E-I) Bottom Arm Package282126
$127.30
ShallowDepth
FloorClosers
91
*specify finish
List price effective November 1, 2015
Shallow
Depth
Floo
rClosers
Shallow Depth Floor ClosersParts Drawings
Model 5040 ������������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset
(D)
(A)
(B)
(C)
(E)
(K)
(M)
(N)
(O)
Screw Kits
Floor Plate Screw Kit107004-*
$6.50
Cement Case Screw Kit107075
$6.50
340 Screw Kit107329 Machine& Wood
$6.50
(D) Top Patch 7494* PKSeePage 28
(M) Floor Plate with Screws4000600-*XXE BC”)4000600-*XXI(“DA”)
SeePage 28
(N) Closer Body(Specify CompleteModel No. x LAP)
SeePage 28
(O) Cement Case withScrews 4000301
SeePage 28
(E) Bottom Patch7495-*PK (includesitems C & J)
SeePage 28
(K) *Spindlewasher
519000-*$10.80
(A) Jamb Portion 42801 $94.80
(B) Finish Plate012202-*PK (BRS)012204-*PK (SS)
$38.70
(C) Patch Filling7495-*
$135.20
(J) Bottom Pivot Insert74101
$36.30
(L) Top Pivot Insert74102
$36.30
92
*specify finish
List price effective November 1, 2015
SPECIALTY CLOSERSParts Drawings
Model 10, PH10, 12, PH12, 15, 16 Duo-Chek® �������������������������������������������������������
(A)
(B)
(C)
(K)
(E) Top Pivot101020 - * See page 31
(F)
(H)
(I)
(G)
(J)
(A) Jamb Portion3065
$94.80
(B) Finish Plate012202-*PK(BRS)012204-*PK(SS)
$38.70
(C) Door Portion12716
$96.70
(F) Alignment Screws& Washers 107032 - *
$28.00
(K) 1004Duo Arm
$77.50
Screw Kits
Top Pivot Screw Kit107329
$6.50
Arm Screw Kit107054
$7.60
Floor Plate Screw Kit107004-*
$6.50
(G) Arm Package102026 - *(includes K & F andattaching screws.)
SeePage 31
(H) Floor Plate withScrews 104020 - *
SeePage 31
(I) Closer Body (SpecifyComplete Model No. xLAP)
SeePage 31
(J) Cement Case withScrews103000
SeePage 31
SpecialtyClosers
93
*specify finish
List price effective November 1, 2015
Spec
ialty
Clos
ers
SPECIALTY CLOSERSParts Drawings
Model 354 ������������������������������������������������������������������������������������������������������������
(A) Jamb Portion01960-*AS
$150.10
(B) Gate Portion35064-*AS
$45.10
(E) Bracket3549000-*Includes Closer Mtg.Screw Kit
$79.40
*specify finish - sprayed finishes only
(A)
(C)
(B)
(C)
(D)
(E)
Model 355 ������������������������������������������������������������������������������������������������������������
(A) Jamb Portion0490-*AS
$150.10
(B) Gate Portion35064-*AS
$45.10
(E) Bracket3549000-*Includes Closer Mtg.Screw Kit
$79.40
(A)
(A)
(B)
(C)
(D)
(E) Screw Kits
Top Pivot Screw Kit107017
$7.40
Closer Mtg. Screw Kit107350
$5.60
Screw Kits
Top Pivot Screw Kit107017-*
$7.40
Closer Mtg. Screw Kit107350
$5.60
(A) Top Pivot Package3551020-*
SeePage 31
(C) Arm with Screws3542026-*
SeePage 31
(D) Closer BodyX03540370-*Includes Bracket
SeePage 31
(C) Top Pivot Package3541020-*
SeePage 31
(C) Arm with Screws3542026-*
SeePage 31
(D) Closer BodyX03540370-*Includes Bracket
SeePage 31
94
*specify finish
List price effective November 1, 2015
SPECIALTY CLOSERSParts Drawings
Model 356 ������������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(E)
(D)
(F)
(A) Jamb Portion01960-*AS
$150.10
(B) Gate Portion35064-*AS
$45.10
(D) Bushing Only(included in armpackage)35051
$23.10
(F) Bracket3549000-*Includes Closer Mtg.Screw Kit
$79.40
*specify finish - sprayed finishes only
Model 357 ������������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(E)
(D)
(F)
(A) Jamb Portion0490-*AS
$150.10
(B) Gate Portion35064-*AS
$45.10
(D) Bushing Only(included in armpackage)35051
$23.10
(F) Bracket3549000-*Includes Closer MtgScrew Kit
$79.40
Top Pivot Screw Kit107017-*
$7.40
Arm Screw Kit107359
$5.60
Closer Mtg. Screw Kit107350
$5.60
Screw Kits
Top Pivot Screw Kit107017 -*
$7.40
Arm Screw Kit107359
$5.60
Closer Mtg. Screw Kit107350
$5.60
(A) Top Pivot Package3551020-*
SeePage 31
(C) Arm withScrews3562020-*
SeePage 31
(E) Closer BodyX03540370-*Includes Bracket
SeePage 31
(C) Top Pivot Package3541020-*
SeePage 31
(C) Arm with Screws3562020-*
SeePage 31
(E) Closer BodyX03540370-*Includes Bracket
SeePage 31
SpecialtyClosers
95
*specify finish - sprayed finishes only
List price effective November 1, 2015
Spec
ialty
Clos
ers
SPECIALTY CLOSERSParts Drawings
Model 359 ������������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(E)
(D)
(F)
(A) Rail35510-*
$53.00
(B) Arm with Screw &Bushing35535-*
$310.00
(C) Bushing Only(included in armpackage)35051
$23.10
(F) Bracket3549000-*Includes Closer Mtg.Screw Kit
$79.40
(D) Arm & Rail Package3592010-*Includes ABC ofAttaching Screws
SeePage 31
(E) Closer BodyX03540370-*Includes Bracket
SeePage 31
Screw Kits
Arm Screw Kit107003
$11.50
Closer Mtg. Screw Kit107350
$5.60
96
*specify finish
List price effective November 1, 2015
Specialty Floor ClosersParts Drawings
Model SEC27 ���������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
3/4" Offset TopPivot AssemblyFA180
SeePage 47
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
Package includes arm, arm lockingscrew, arm cap & screw and shouldercollar
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(C) Arm Cap & Screw012142R*ATS(RH, BRS)012142L*ATS(LH, BRS)012144R*ATS(RH, SS)012144L*ATS(LH, SS)
$38.70
(D) Arm x Locking Screw18550-Asy (RH)18650-Asy (LH)
$145.10
(E) Arm Locking ScrewOnly88905-PKG (5)
$29.00
(F) Arm Shims275065-PKG (5)
$29.00
(G) Arm Bearing Washer275062-PKG-5
$15.30
(H) Spindle Shoulder Collar259000-*
$25.60
(I) Floor Plate withScrews274056 -*
SeePage 31
(J) Closer Body(Specify CompleteModel No. x LAP)
SeePage 31
(K) Cement Casewith Screws253006R - (RH)253006L - (RH)
SeePage 31
Screw Kits
FA180 Torx® Screw Kit107014-*T Machine (2 req.)107114-T Wood (2 req.)
$39.00
Arm Screw Kit107048 Machine (2 each)107144 Wood (2 each)
$6.50
Floor Plate Screw Kit107021-*
$6.50
Bottom Arm Package252056R* RH)252056L* (LH)
SeePage 31
SpecialtyClosers
97
*specify finish
List price effective November 1, 2015
Spec
ialty
Clos
ers
Specialty ClosersParts Drawings
1350/1351 Gate Closer �����������������������������������������������������������������������������������������
No parts available
98
*specify finish
List price effective November 1, 2015
Overhead Concealed CloserParts Drawings
0608/AW0608 ��������������������������������������������������������������������������������������������������������
(C) Arm Assembly (sprayedfinishes only)0608312-*
$195.70
(D) Rail0608109
$55.70
(A)
(A)
(C)
(D)
(E)
(B)
(A) Closer MountingKit608019
SeePage 37
(B) Closer Body(SpecifyComplete ModelNo. x LAP)
SeePage 37
(E) Arm & RailPackage(sprayedfinishes only)06082012-*
SeePage 37
Screw Kit
Screw Kit608064
$23.80
OverheadConcealed
Closers
99
*specify finish
List price effective November 1, 2015
Overhe
adCo
ncea
ledClos
ers
Overhead Concealed CloserParts Drawings
(D) Arm Assembly (sprayedfinishes only)0608312-*
$195.70
(E) Rail0608109
$55.70
(D)
(C)
(B)
(A)
(E)
(F)
M0608/MW0608/W0608 ������������������������������������������������������������������������������������������
(A) Closer Mounting Kit608049PKG
SeePage 37
(B) Closer Body(SpecifyComplete ModelNo. x LAP)
SeePage 37
(C) Cover Plate6084000-*
SeePage 37
(F) Arm & RailPackage (sprayedfinishes only)06082012-*
SeePage 37
Screw Kits
Cover Plate Screw Kit107022-*
$13.20
Screw Kit608064
$23.80
100
*specify finish
List price effective November 1, 2015
Overhead Concealed CloserParts Drawings
608EL/608SL ����������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(E)
(D)
(A) Closer Mounting Kit608019
SeePage 38
(B) Closer Body(Specify CompleteModel No. x LAP)
SeePage 38
(C) End Load Arm Pkg6002020
SeePage 38
(D) Side Load Arm608005S
SeePage 38
(E) Bottom Pivot withScrews608011A
SeePage 38
Screw Kit
Arm Screw Kit(Includes arm endblock)107065
$29.00
Bottom Pivot Screw Kit107143
$6.50
OverheadConcealed
Closers
101
*specify finish
List price effective November 1, 2015
Overhe
adCo
ncea
ledClos
ers
Overhead Concealed CloserParts Drawings
M608 ����������������������������������������������������������������������������������������������������������������������
(A)
(C)
(D)
(E)
(B)
(A) Closer MountingKit608049PKG
SeePage 38
(B) Closer Body(Specify CompleteModel No. x LAP)
SeePage 38
(C) Cover Plate6084000 - *
SeePage 38
(D) Arm Package6002020
SeePage 38
(E) Bottom Pivot608011A
SeePage 38
Screw Kits
Arm Screw Kit107065
$29.00
Cover Plate Screw Kit107022-*
$13.20
Bottom Pivot Screw Kit107143
$6.50
102
*specify finish
List price effective November 1, 2015
Overhead Concealed CloserParts Drawings
MW608/W608 ���������������������������������������������������������������������������������������������������������
(A)
(C)
(D)
(E)
(B)
(A) Closer Mounting Kit608049PKG
SeePage 38
(B) Closer Body(Specify CompleteModel No. x LAP)
SeePage 38
(C) Cover Plate6084000 - *
SeePage 38
(D) Arm Package6002021
SeePage 38
(E) Bottom Pivot608011A
SeePage 38
Decorative Arm Cap(contains 2 caps)1990906 (612 & 627 only)
OrderSeparately
SeePage 43
Screw Kits
Bottom Pivot Screw Kit107143
$6.50
Arm Screw Kit107065Includes arm end block
$29.00
Cover Plate Screw Kit107022-*
$13.20
OverheadConcealed
Closers
103
*specify finish
List price effective November 1, 2015
Overhe
adCo
ncea
ledClos
ers
Overhead Concealed CloserParts Drawings
AW608 ��������������������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(A) Closer Mounting Kit608019
SeePage 38
(B) Closer Body(Specify CompleteModel No. x LAP)
SeePage 38
(C) End Load Arm Pkg6002021
SeePage 38
(D) Side Load Arm608005S
SeePage 38
(E) Bottom Pivotwith Screws608011A
SeePage 38
Screw Kits
Arm Screw Kit(Includes arm end block)107065
$29.00
Cover Plate Screw Kit107022
$13.20
Bottom Pivot Screw Kit107143
$6.50
104
*specify finish
List price effective November 1, 2015
Decorative Arm Cap(contains 2 caps)199
OrderSeparately
SeePage 43
Overhead Concealed CloserParts Drawings
91 ��������������������������������������������������������������������������������������������������������������������������
(A)
(B)
(D)
(E)
(F)
(C)
(K)
(Not for new installation.For replacement only.)
Right Hand Arm Package90237-***PKG (includes 90237, 90259 and 90253)
$169.00Left Hand Arm Package90236-***PKG (includes 90236, 90259 and 90253)
Non-Hold Open Track Assembly90255-ASY (includes 90255, 90242 and 90239)
$96.00
Hold Open Track Assembly90254-ASY (includes 90254, 90242 and 90239)
$140.00
(A) Closer Body (Specify hand,function, finish x LAP)
SeePage 40
(B) Arm90236-*** (LH)90237-*** (RH)
$94.00
(C) Track90239
$51.50
(D) Hold Open Asembly90254
$69.10
(E) Slider90253
$51.00(F) Non-Hold Open Stop Block
90255
(G) Arm Screw Kit90259-***
$12.00
(H) Holder Screw Kit90241-***
$15.00
(J) Track Screw Kit90242
$4.00
(K) Retrofit Track Spacer and Screws(Consult Factory)
$18.00
OverheadConcealed
Closers
105
Left hand shown*specify finish
List price effective November 1, 2015
The packages in this box may use buy program discounts.
Overhe
adCo
ncea
ledClos
ers
Overhead Concealed CloserParts Drawings
91 ���������������������������������������������������������������������������������������������������������������������������
106List price effective November 1, 2015
(L)
(B)
(D)(E)
(F)
(C)
(K)
(Not for new installation.For replacement only.)
Right Hand Arm Package90237-***PKG (includes 90237, 90259 and 90253)
$169.00Left Hand Arm Package90236-***PKG (includes 90236, 90259 and 90253)
Non-Hold Open Track Assembly90255-ASY (includes 90255, 90242 and 90239)
$96.00
Hold Open Track Assembly90254-ASY (includes 90254, 90242 and 90239)
$140.00
(A) Closer Body (Specify hand,function, finish x LAP)
SeePage 40
(B) Arm90236-*** (LH)90237-*** (RH)
$94.00
(C) Track90239
$51.50
(D) Hold Open Asembly90254
$69.10
(E) Slider90253
$51.00
(F) Non-Hold Open Stop Block90255
$21.50
(G) Arm Screw Kit90259-***
$12.00
(H) Holder Screw Kit90241-***
$15.00
(J) Track Screw Kit90242
$4.00
(K) Retrofit Track Spacer and Screws(Consult Factory)
$18.00
(L) Wood Frame Clip90257-***
$133.90
Left hand shown*specify finish
The packages in this box may use buy program discounts.
(A)
Overhead Concealed CloserParts Drawings
700/800 ������������������������������������������������������������������������������������������������������������������
(A)
(A)(D)
(F)(E)
(H)
(B)
(D) Arm Block808075-1
$30.40
(E) Arm Assembly808175
$123.30
(A) Attaching Bracket1639000
SeePage 41
(B) Closer Body (SpecifyComplete Model No.x LAP)
SeePage 41
(F) Arm Package8002020
SeePage 41
(G) Bottom PivotPackage2183020 Includes H
SeePage 41
Screw Kits
Bottom Pivot Screw Kit107218
$6.50
Arm Screw Kit107055Includes arm end block
$39.80
Arm Block Screw806018-PKG
$17.30
Cover Plate Screw Kit107006-*
$6.50
OverheadConcealed
Closers
107
*specify finish
List price effective November 1, 2015
(H) Pivot Wrench218007
$30.40
Overhe
adCo
ncea
ledClos
ers
Overhead Concealed CloserParts Drawings
M700/M800 �������������������������������������������������������������������������������������������������������������
(A)
(C)
(D)
(E)
(F)
(B)
(G)
(A) Closer MountingChannel 1929000
SeePage 41
(B) Closer Body(Specify CompleteModel No. x LAP)
SeePage 41
(C) Cover Plate7004000R* (RH)7004000L* (LH)800 Series 8004000-*
SeePage 41
(F) Arm Package8002020
SeePage 41
(G) Bottom PivotPackage2183020 Includes H
SeePage 41
(D) Arm Block808075-1
$30.40
(E) Arm Assembly808175
$123.30
Screw Kits
Bottom Pivot Screw Kit107218
$6.50
Arm Screw Kit107055Includes arm end block
$39.80
Arm Block Screw806018-PKG
$17.30
Cover Plate Screw Kit107006-*
$6.50
108
*specify finish
List price effective November 1, 2015
(H) Pivot Wrench218007
$30.40
(H)
Overhead Concealed CloserParts Drawings
MW700/MW800 �������������������������������������������������������������������������������������������������������
(D) Arm Block808075-1
$30.40
(E) Arm Assy808174
$113.60
(A)
(D)
(E)
(F)
(B)
(G)
(C)
(A) Closer MountingChannel 1929000
SeePage 41
(B) Closer Body(Specify CompleteModel No. x LAP)
SeePage 41
(C) Cover Plate7004000R* (RH)7004000L* (LH)800 Series8004000-*
SeePage 41
(F) Arm Package8002021
SeePage 41
(G) Bottom Pivot2183020 Includes I
SeePage 41
(H) Decorative Arm Cap(contains 2 caps)1990906-* (612 or627 only)
OrderSeparately
SeePage 43
Screw Kits
Bottom Pivot Screw Kit107218
$6.50
Arm Screw Kit107055Includes arm end block
$39.80
Arm Block Screw806018-PKG
$17.30
Cover Plate Screw Kit107006-*
$6.50
(H)
(I)
OverheadConcealed
Closers
109
*specify finish
List price effective November 1, 2015
(I) Pivot Wrench218007
$30.40
Overhe
adCo
ncea
ledClos
ers
Overhead Concealed CloserParts Drawings
W700/W800 �������������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(D)
(E)
(G)
(F)
(H)
(A) Closer Mounting Plate1989000
SeePage 41
(B) Closer Body(Specify CompleteModel No. x LAP)
SeePage 41
(C) Cover Plate7004000R* (RH)7004000L* (LH)
SeePage 41
(D) Arm Block808075-1
$25.90
(E) Arm Assembly808174
$127.00
(F) Arm Package8002021
SeePage 41
(G) Bottom Pivot2183020 (Includes I)
SeePage 41
(H) Decorative Arm Cap(contains 2 caps)1990906* (612&627 only)
OrderSeparately
SeePage 43
Screw Kits
Bottom Pivot Screw Kit107218
$6.50
Arm Screw Kit107055Includes arm end block
$39.80
Arm Block Screw806018-PKG
$17.30
Cover Plate Screw Kit107006-*
$6.50
110
*specify finish
List price effective November 1, 2015
(I) Pivot Wrench218007
$30.40
(I)
Pivotsand
PivotSets
Intermediate PivotsParts Drawings
M19, M190, ML19, FA19, 219, 319, FM19, FM190
All Electrified M19 Intermediate Pivots�������������������������������������������������������������
Model Description Price
107015-* Metal Screws for One Leaf $6.50
107115-* Wood Screws for One Leaf $6.50
181778-* Hex Cap $6.70
219, 319 and 419 Also Use:
107059-* Includes Screws and Backplate $144.90
Torx® Available - Suffix “T” Add $63.10 to each kit
Model Description Price
107014-* Metal Screws for One Leaf $6.50
107114-* Wood Screws for One Leaf $6.50
Torx® Available - Suffix “T” Add $63.10
119 Intermediate Pivot ���������������������������������������������������������������������������������������
111
*specify finish
List price effective November 1, 2015
Pivo
tsan
dPivo
tSets
Top Pivot and Pocket PivotsParts Drawings
Model Description Price
107047* Includes Screws and Stud $83.60
30243 Door Portion $94.80
30814** Frame Portion (handed) $305.20
Model Description Price
10210 AS Jamb Portion $162.60
3065 Door Portion $94.80
107012* Jamb Portion Screw Kit $6.30
107329 Door Potion Screw Kit $6.50
Angle Pivot-3 ��������������������������������������������������������������������������������������������������������
Torx® not available.
Torx® not available.
Model Description Price
619005-* Screw Kit $9.40
Torx® Available Add $63.10
F519 Pocket Pivot ������������������������������������������������������������������������������������������������
Jamb Portion
Door Portion
Frame Portion Door Portion
Top Pivot 340 x 102����������������������������������������������������������������������������������������������
112List price effective November 1, 2015
Pivots & Pivot SetsParts Drawings
117-1/4 Pivot Set ���������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
117, F117 Pivot Set ��������������������������������������������������������������������������������������������
Right Hand Shown3/4" and 1-1/2" Offset
(A)
(B)
(C)
(E)
(D)
(F)
(A)
(B)
(C)
(E)
(D)
(F)
*specify finish
Screw Kits
180 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
117-1/4 Screw Kit117127 - *
$6.50
Screw Kits
180 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
Bottom Pivot Screw Kit117127 - *
$6.50
(C) 180 Top PivotSeePage 47
(C) 180 Top Pivot(for Fire-Rated Doors,order F180)
SeePage 47
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Arm Cap and Screw12029-*AS
$38.70
(E) Arm LH11706LASY
$84.60
(E) Arm RH11705RASY
$84.60
(F) Floor Portion Assy RH17406R*AS
$337.60
(F) Floor Portion Assy LH17406L*AS
$337.60
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Arm Cap and Screw12029-*AS
$38.70
(E) 3/4" Offset Arm LH11706LASY
$84.60
(E) 3/4" Offset Arm RH11705RASY
$84.60
(E) 1-1/2" Offset Arm LH11706L15*
$162.20
(E) 1-1/2" Offset Arm RH11705R15*
$162.20
(F) 117 Floor Portion Assy17526-*AS
$337.60
(F) F117 Floor Portion Assy17559-*AS
$304.00
Pivotsand
PivotSets
113
*specify finish
List price effective November 1, 2015
Pivo
tsan
dPivo
tSets
Pivots & Pivot SetsParts Drawings
147, F147 Pivot Set �����������������������������������������������������������������������������������������������
Right Hand Shown3/4" and 1-1/2" Offset
(A)
(B)
(D)
(E)
(G)
(H)
(I)
(F)
(C)
*specify finish
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Arm Cap & Screw012142R*AS(RH, BRS)012142R*AS(RH, BRS)012142L*AS(LH, BRS)012144R*AS(RH, SS)012144L*AS(LH, SS)
$38.70
(E) Arm x Locking Screw3/4" Offset 275177 RH3/4" Offset 275176 LH
$77.50
(E) Arm x Locking Screw1-1/2" Offset 275167-*
$119.80
(F) Arm Lock Screw Pkg(5 per)88905-PKG
$29.00
(G) Arm Shim Kit (2 per)107071
$15.30
(H) Spindle Stud 14714 $22.00
(I) 147 /F147 Floor Portionx Bearing 14721-*AS
$313.60
Screw Kits
147/F147 Bottom PivotScrew Kit
107062-* includes 107071$6.50
180/F180 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
Arm Screw Kit107044 Machine107144 Wood
$6.50
(C) 180 Top Pivot(for Fire-Rated Doorsorder F180)
SeePage 47
114List price effective November 1, 2015
Pivots & Pivot SetsParts Drawings
L147, FL147 Pivot Set �������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
547 Pivot Set ���������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(A)
(B)
(D)
(E)
(H)
(G)
(I)
(F)
(C)
*specify finish
(C) L180 Top Pivot(for Fire-Rated Doorsorder FL180)
SeePage 47
(A)
(B)
(E)(C)
(G)
(F)
Screw Kits
180/F180 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
Arm Screw Kit107044 Machine107144 Wood
$6.50
L147/FL147 Bottom PivotScrew Kit
(includes “E” ring shim)107062-*
$6.50
(B) Arm Cap & Screw012142R*AS(RH, BRS)012142L*AS(LH, BRS)012144R*AS(RH, SS)012144L*AS(LH, SS)
$38.70
(C) Arm x LockingScrew275177RH275177RH
$38.70
(D) Arm x LockingScrew Pkg (5 per)88905-Pkg
$38.70
(E) Arm Shim Kit (2 per)107071
$14.90
(F) Spindle Stud 14714 $22.00
(G) 147 Floor Portion xBearing14721-*AS
$313.60
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Arm Cap & Screw012142R*AS (RH, BRS)012142L*AS (LH, BRS)012144R*AS (RH, SS)012144L*AS (LH, SS)
$38.70
(E) Arm x Locking Screw1-3/4" Door 18550-Asy RH
18650-Asy LH$145.10
(E) Arm x Locking Screw2" Door 18551-Asy RH
18651-Asy LH$320.50
(E) Arm x Locking Screw2-1/4" Door 18552-Asy RH
18652-Asy LH$320.50
(E) Arm x Locking Screw2-1/2" Door 18553-Asy RH
18653-Asy LH$320.50
(E) Arm x Locking Screw3" Door 18554-Asy RH
18654-Asy LH$320.50
(F) Arm Lock Screw Pkg(5 per)88905-PKG
$29.00
(G) Arm Shim Kit (2 per)107071
$38.70
(H) Spindle Stud14714
$22.00
(I) L147 Floor Portion xBearing14721-*AS
$313.60
Pivotsand
PivotSets
115
*specify finish
List price effective November 1, 2015
(A) M190 IntermediatePivot (For Fire-RatedDoors order FM190)
SeePage 47
147 Bottom Pivot Screw Kit(includes 107071)107062-*
$6.50
Pivo
tsan
dPivo
tSets
Pivots & Pivot SetsParts Drawings
195 Pivot Set ��������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
173 Pivot Set ��������������������������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(A)
(B)(C)
(D)
(E)
(F)*specify finish
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Door Portion Asy RH19503-*AS
$236.50
(D) Door Portion Asy LH19504-*AS
$236.50
(E) Cap19511-*
$10.60
(F) Jamb Portion Asy RH19501-*AS
$304.60
(F) Jamb Portion Asy LH19502-*AS
$304.60
Screw Kits
180 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
195 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
(C) 180 Top PivotSeePage 47
116
*specify finish
List price effective November 1, 2015
(D)
(F)
(E)
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Arm Cap and Screw12029-*AS
$38.70
(E) Arm LH11706L*AS
(E) Arm RH11705R*AS
$84.60
(F) Spindle Stud173003
$20.50
(G) Spindle collar173001
$46.80
(H) Mounting Bolt173002
$24.10
(J) Floor Anchor173010
$15.80
(A)
(B)(C)
(G)
(H)
(J)
(C) 180 Top PivotSeePage 47
Screw Kits
180 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
Bottom Arm Screw Kit107044- Machine107144- Wood
$6.50
1-1/2" Offset Arm
(E) 1-1/2" Offset Arm LH11706L15*
(E) 1-1/2" Offset Arm RH11705R15*
$84.60
Pivots & Pivot SetsParts Drawings
117-1/2, F117-1/2 Pivot Set �����������������������������������������������������������������������������������
Right Hand Shown3/4" and 1-1/2" Offset
(C) 180 Top Pivot(for Fire-Rated Doorsorder F180)
SeePage 47
1-1/2" Offset Arm275167-*
$119.80
(A)
(B)
(D)
(E)
(G)
(H)
(I)
(J)
(F)
(C)
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Arm Cap & Screw012142R*AS (RH, BRS)012142L*AS (LH, BRS)012144R*AS (RH, SS)012144L*AS (LH, SS)
$38.70
(E) Arm x Locking Screw3/4" Offset 275177 RH3/4" Offset 275176 LH
$77.50
(F) Arm Lock Screw Pkg(5 per)88905-PKG
$29.00
(G) Arm Shim Kit (5 per)275065-PKG
$15.30
(H) Spindle Shoulder Collar16301A*
$25.60
(I) Floor Plate x Screws1174050-*
$83.40
(J) 117-1/2 & F117-1/2 FloorPortion AssemblyX01176350
$519.70
Screw Kits
180/F180 Screw Kit107014 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
Floor Plate Screw Kit107004-*
$6.50
Arm Screw Kit107044 - * Machine107144 - * Wood
$6.50
Pivotsand
PivotSets
117
*specify finish
List price effective November 1, 2015
Pivo
tsan
dPivo
tSets
Pivots & Pivot SetsParts Drawings
Note: FL is available for1-3/4" doors only
L117, FL117 Pivot Set ����������������������������������������������������������������������������������������
Right Hand Shown3/4" Offset Only
(C) L180 Top Pivot(for Fire-Rated Doorsorder FL180)
SeePage 47
(A)
(B)
(D)
(E)
(G)
(H)
(I)
(J)
(K)
(F)
(C)
*specify finishSpecial Note: FL117 is available for 1-3/4" doors only
(A) Pivot Stud181770-ASY
$6.30
(B) Hex Cap181778-*
$6.70
(D) Arm Cap & Screw012142R*AS (RH, BRS)012142L*AS (LH, BRS)012144R*AS (RH, SS)012144L*AS (LH, SS)
$38.70
(E) Arm x Locking Screw1-3/4" Door 18550-ASY RH
18650-ASY LH$145.10
(E) Arm x Locking Screw2" Door 18551-ASY RH
18651-ASY LH$320.50
(E) Arm x Locking Screw2-1/4" Door 18552-ASY RH
18652-ASY LH$320.50
(E) Arm x Locking Screw2-1/2" Door 18553-ASY RH
18653-ASY LH$320.50
(E) Arm x Locking Screw3" Door 18554-ASY RH
18654-ASY LH$320.50
(F) Arm Lock Screw Pkg(5 per)88905-PKG
$29.00
(G) Arm Shim Kit (5 per)275065-PKG
$15.30
(H) Spindle Shoulder Collar259500-*
$74.20
(I) Heavy-Duty Thrust-Bearing41204-PKG
$82.20
(J) Floor Plate x Screws1174050-*
$83.40
(K) Floor Portion AssemblyX01176351Includes 41204-PKG
$519.70 Screw Kits
L180/F180 Screw Kit107016 - * Machine ( 2 req.)107116 - * Wood (2 req.)
$7.40
Arm Screw Kit107048 - * Machine ( 2 req.)107114 - * Wood (2 req.)
$6.50
Floor Plate Screw Kit107004 - * Machine ( 2 req.)
$6.50
118List price effective November 1, 2015
Pivots & Pivot SetsParts Drawings
127-3/4 & 128-3/4 Pivot Sets ���������������������������������������������������������������������������������
370 Pivot Set ��������������������������������������������������������������������������������������������������������
(D) 320 Top PivotSeePage 51
*specify finish
(A)
(B)
(F)
(G)
(C)(C)
(D)
(D) 340 Top PivotSeePage 51
(A)
(B)
(C)(C)
(D)
(E)
(F)
(E)
(A) Top Pivot Jamb Portion640-ASY
$101.40
(B) Top Pivot Plate x Screws12724-*PK(SS)12720-*PK (BRS)
$38.70
(C) Top Pivot Door Portion12716
$96.70
(E) Jamb Portion & StudAssembly 127-3/4 Only12711-*
$246.50
(F) Arm & Bearing Assembly12714 Door Portion
$71.00
(G) Floor Pivot & StudAssembly 128-3/4 Only71521-*AS
$141.80
Screw Kits
320 Screw Kit107340 Machine & Wood
$6.50
127-3/4 &128-3/4 Screw Kit117127-*
$6.50
Screw Kits
340 Screw Kit107329 Machine & Wood
$6.50
370 Screw Kit107370-*
$6.50
(A) Top Pivot Jamb Portion3065
$94.80
(B) Finish Plate xScrews012202-*PK (BRS)012204-*PK (SS)
$38.70
(C) Top Pivot Door Portion30243
$94.80
(E) Arm22131
$107.70
(G) Floor Portion and stud22121-*
$179.10
Pivotsand
PivotSets
119
*specify finish
List price effective November 1, 2015
Pivo
tsan
dPivo
tSets
Pivots & Pivot SetsParts Drawings
117-3/4 Pivot Set ���������������������������������������������������������������������������������������������������
H117-3/4 Pivot Set ������������������������������������������������������������������������������������������������
*specify finish
*specify finish
(D) Top Pivot340
SeePage 51
(D) Top PivotH340
SeePage 51
(H) 587 Side Load ArmPackage262587
$560.00
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(A)
(B)
(C)
(D)
(F)
(G)
(E)
(I)
(J)
(H)
Screw Kits
340 Screw Kit107329 Machine & Wood
$6.50
Arm Screw Kit107064-* Machine & Wood
$6.50
Floor Plate Screw Kit107004-*
$6.50
(A) Top Pivot Jamb Portion065
$94.80
(B) Top Pivot Finish Plate012202-*PK(BRS)012204-*PK(SS)
$38.70
(C) Top Pivot Door Portion30243
$94.80
(E) Arm185.75
$172.20
(F) Spindle Shoulder16301A
$25.60
(G) Floor Plate x Screws1174020-*
$83.40
(H) Floor Portion AssemblyX01176320
$514.80
(A) Top Pivot Jamb Portion308548
$330.20
(B) Top Pivot Finish Plate012202-*PK(BRS)012204-*PK(SS)
$38.70
(C) Top Pivot Door Portion30141
$330.20
(E) Standard End Load ArmPackage262022
$560.00
(F) Spindle Shoulder Collar259500-*
$74.20
(G) Heavy-Duty ThrustBearing41204-PKG
$82.20
(I) Floor Plate x Screws1174020-*
$83.40
(J) Floor Portion AssemblyX01176322Includes 41204-PKG
$891.10
Screw Kits
H340 Screw Kit107329 Machine & Wood
$6.50
Arm Screw Kit107045 - Machine107145 - Wood
$6.50
587 Arm Screw Kit107077 - Machine107177 - Wood
$10.60
Arm Shim Screw Kit107060
$8.80
Floor Plate Screw Kit107004-*
$6.50
120List price effective November 1, 2015
Pivots & Pivot SetsParts Drawings
178 Pivot Sets �������������������������������������������������������������������������������������������������������
176 Pivot Sets �������������������������������������������������������������������������������������������������������
(A)
(B)
(E)
(C)
(D)
(A) Top Jamb Portion42801
$94.80
(B) Finish Plate012202-*PK (BRS)012204-*PK (SS)
$38.70
(C) Patch Fitting7495-*
$135.20
Top Pivot Jamb Screw Kit107039
$6.50
(D) Top Patch7494-* PK
SeePage 28
(E) Bottom PivotFloor Portion74104
SeePage 28
Pivotsand
PivotSets
121
*specify finish
List price effective November 1, 2015
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(A) Top Pivot Jamb Portion640-ASY
$101.40
(B) Top Pivot Plate x Screws12724-*PK(SS)12720-*PK (BRG)
$38.70
(C) Top Pivot Door Portion12716
$96.70
(E) Bottom Arm12704
$66.10
(F) Sleeve176001
$42.60
(G) Mounting Bolt176002
$24.40
(H) Floor Anchor173010
$15.80
Screw Kits
320 Screw Kit107340 Machineand Wood
$6.50
Bottom Arm Screw Kit173176 Machineand Wood
$6.50
Chec
kmate®
Stop
san
dHo
lders
Checkmate® Stops & HoldersParts Drawings
Checkmate® �����������������������������������������������������������������������������������������������������������
End Caps #1, 2, 9 & 10 only
#1 & #9Shock End Block 6003 $14.20
Far End Block 6004 $14.20
#2 & #5 Far End Block 5059 (2 req.) $2.40
#10 Far End Block 5011 (2 req.) $1.90
Screw Kits
#1Friction or Stop 6487-* $26.20
Hold Open 6998N* $19.20
#2 Friction or Stop 5999-* $52.10
#6 Stop 6487-* $26.20
#7 Friction or Stop 3880-*XXXA $36.60
#8 Friction or Stop 5897-* $34.30
#9Friction or Stop 6468-* $26.20
Hold Open 6997N* $28.40
#10 7
Friction or Stop 5998-* $30.90
Arm Assemblies (includes arm, shoe & slider cam)Specify Model & Finish: example: 1- *346R
2 - *346RConsultFactory
*specify finish
End Cap(Shock)
Slider Cam
Channel
Arm
End Cap(Far End)
Shoe
Adapter Kits
#2 

Hold Open FrictionAdapter
5012-PKG $19.00
122
*specify finish
List price effective November 1, 2015
Electromagnetic
DoorReleases
Electromagnetic DoorHolder/ReleasesParts Drawings
Accessories������������������������������������������������������������������������������������������������������������
900-100
2(51)
9900-200
3(76)
9 900-300
4(102)
9 900-400
5(127)
9 900-500
6(152)
900-600
7(178)
9 900-700
900-75
900-50
1-1/2" (38mm) Extension(for use only with Models 997& 998)Mounts behind wall cover.
SeePage 66
XK996Part# 996631-*
Base Unit Armature ExtensionMounts between armature andcontact plate.Part# 900
SeePage 66
Armature Extension 90° BendPart# 900-Z
SeePage 66
* specify finish
123
*specify finish
List price effective November 1, 2015
Extension pieces must beused in conjunction with 900Base Unit
SeePage 66
Part# 900-50Part# 900-75Part# 900-100Part# 900-200Part# 900-300Part# 900-400Part# 900-500Part# 900-600Part# 900-700
Elec
tromag
netic
Door
Releas
es
Electromagnetic DoorHolder/ReleasesParts Drawings
Used with Model 990, 989 ������������������������������������������������������������������������������������
Used with Model 980/981 �������������������������������������������������������������������������������������
Floor Portion
(A) Magnet HousingCover980311-*/981311-*
$300.70
(B) Magnet Support Bracket981309
$27.60
(C) Gasket980095
$18.20
(D) Magnet*996219-3V
$135.20
(E) Magnet Housing Base980312-*/981312-*
$183.60
(A)
(B)
(A)
(B)
(C)
(C)
(D)
(E)
**For voltages other than 12 VDC, 24VAC, 24 VDC, and 120 VAC, contactfactory for electromagnet assembly partnumber.
*specify finish
(A) Magnet Bracket990002
$29.30
(B) Magnet**996219-3V
$135.20
(C) Wall Cover Plate990001
$48.90
*specify finish**For voltages other than 12 VDC, 24VAC, 24 VDC, and 120 VAC, contactfactory for magnet mounting bracketassembly part number.
Used with Model 994, 997, 998 ����������������������������������������������������������������������������
(A)
(B)
Magnet Assembly and Bracket**998369-3V
$156.80
Cover998315-*
$59.80
*specify finish
**For voltages other than 12 VDC, 24VAC, 24 VDC, and 120 VAC, contactfactory for magnet mounting bracketassembly part number.
Screw Kits
Screw Kit for 980980328-*
$69.30
Screw Kit for 981981328-*
$87.70
Screw Kits
Screw Kit for 990990300-*
$21.60
Screw Kits
Screw Kit for 997,997/998998300-*
$24.20
124
*specify finish
List price effective November 1, 2015
Electromagnetic
DoorReleases
Electromagnetic DoorHolder/ReleasesParts Drawings
Used with Model 996 ��������������������������������������������������������������������������������������������
*specify finish
**For voltages other than 12 VDC, 24VAC, 24 VDC, and 120 VAC, contactfactory for magnet mounting bracketassembly part number.
(A)
(B)
(C)
(A) Surface Mounting BoxHousing996501-*
$84.00
(B) Magnet Assembly andBracket**996369-3V
$156.80
(C) Cover998315-*
$59.80
Used with Model 999 ��������������������������������������������������������������������������������������������
(A)
(B)(C)
(A Base Plate999105
$63.90
(B) Cover999055-*
$237.40
(C) Magnet**996219-3V
$135.20
*specify finish
**For voltages other than 12 VDC,24 VAC, 24 VDC, and 120 VAC,contact factory for magnetmounting bracket assembly partnumber.
Used with Model 980/981, 990, 991, 996, 997 ������������������������������������������������������
Door Portion
(A)
(B) (B)
(C)
(A) Backup Plate900314
**
(B) Door Armature997510-*
$108.60
(C) **Door Plate998009
**
Surface AppliedConcealed Mounting
Thru Bolt Mounting**Not Sold Separately – See Screw Kit*specify finishDoor portion screws included withWall/Floor parts.
Screw Kits
Screw Kit for 999999318-*
$24.20
Screw Kits
Screw Kit for 996996325-*
$24.20
125
*specify finish
List price effective November 1, 2015
Elec
tromag
netic
Door
Releas
es
Used with Model 994 ��������������������������������������������������������������������������������������������
Electromagnetic DoorHolder/ReleasesParts Drawings
Used with Model 989 ��������������������������������������������������������������������������������������������
Used with Model 998, 999 ������������������������������������������������������������������������������������
(A)
(B) (B)
(C)
(A)
(B) (B)(D)(D)
(C)
(A) **Backup Plate900314
**
(B) Door Armature998512-*
$108.60
(C) **Door Plate998009
**
(A) **Backup Plate900314
**
(B) Door Armature994510-*(includes D)
$116.70
(C) **Door Plate998009
**
Surface AppliedConcealed Mounting
Thru BoltMounting
**Not Sold Separately –See Screw Kit*specify finishDoor portion screws included withWall/Floor parts.
(A)(A) Door ArmatureAttachment screwincluded in Kit.Part#444FM
$67.60
(D) Swivel Armaturecannot be used withextension piecesPart# 900-3
$77.30
126
*specify finish
List price effective November 1, 2015
Electromagnetic DoorHolder/ReleasesParts Drawings
(A)
(B)
(D)(C)
Screw Kit for 991990300-*
$21.60
*specify finish
Used with Model 991 ���������������������������������������������������������������������������������������������
(A) Switch Box991002
$218.40
(B) Magnet Assembly991210-120 VAC991211-24 VAC/DC991212-24 VDC991214-12 VAC991215-240 VAC
$342.40
(C) Gasket991001
$26.60
(D) Wall Cover Plate990001
$48.90
Used with Model 993/9930 ������������������������������������������������������������������������������������
(A)
(C)
(B)
Screw Kit for 993:993300-A
$14.70
(A) Magnet HousingAssembly993100-A
$562.90
(B) Armature Assembly993512-A
$386.10
(C) Bracket for floormounting (Model 9930)993126-*
$87.30
Screw kit for angle bracket993040-*
$30.90
Switch Box
Wall Plate
Magnet andBracket Assembly
Thru BoltMounting Only
Electromagnetic
DoorReleases
127
*specify finish
List price effective November 1, 2015
Elec
tromag
netic
Door
Releas
es
Electromagnetic DoorHolder/ReleaseParts Drawings
*specify finish
Used with Model 972H �����������������������������������������������������������������������������������������
Latch
Latch
Used with Model 972S ������������������������������������������������������������������������������������������
(A)
(A)
(A)
(B)
(B)
(C)
(C)
(D)
(D)
(B)(D)
(C)
Screw Kit for 972/973H972190
$54.30
Screw Kit for 972/973S972290
$54.30
Used with Model 972U ������������������������������������������������������������������������������������������
Screw Kit for 972/973U972390
$89.90
(E)
(E)
(F)
(A) "U" Bracket972041
$75.20
(B) Cover972102
$106.90
(C) Latch Unit972106
$166.80
(D) Box972100972112972118972120
$594.20
(A) Angle Bracket972040
$45.20
(B) Cover972102
$106.90
(C) Flat Latch Bracket972044
$41.80
(D) Latch Unit972106
$166.80
(E) Threaded Latch Bracket972043
$41.60
(F) Box972100972112972118972120
$594.20
(A) Angle Bracket972040
$45.20
(B) Cover972102U
$106.90
(C) Latch Arm972105
$54.40
(D) "U" Bracket972041
$75.20
(E) Box972100972112972118972120
$594.20
128List price effective November 1, 2015
Electrified Closer/HoldersParts Drawings
SMOK-CHEK® V �������������������������������������������������������������������������������������������������������
(A)
(D)
(E)
(B)
(C)
(A) Holder Assembly550100 120VAC550101 24VAC/DC
$464.00
(B) Magnet930105 120VAC930106 24VAC/DC
$135.50
(C) Holder Cover(non-detectored)550106-*
$128.30
(D) Closer Body85010163-*
$0.00
(E) Closer Cover233069K*
$52.10
Screw Packs
550221-*for models with closers
$37.70
550131-*for models withoutclosers
$37.70
ElectrifiedClosers
andHolders
129
*specify finish
List price effective November 1, 2015
Elec
trifie
dClos
ers
andHo
lders
Electrified Closer/HoldersParts Drawings
*specify finish
SMOK-CHEK® V �������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(D)(E)
(A) Deep RevealPush Side Arm550789-*
$265.00
(B) Push Side Arm550136K*
$153.40
(C) Pull Side Arm550120K-*
$153.40
(D) Door Pivot Bracket(Used with 0602/2602models)565118T689
$35.60
(E) PA Bracket(Used with 0602/2602models)40-1600-0450-078
$34.10
(F) Arm (used with0602/2602 models)20-7700-0192-*
$88.60
130
*specify finish
List price effective November 1, 2015
(F)
Electrified Closer/HoldersParts Drawings
SMOK-CHEK® VI ������������������������������������������������������������������������������������������������������
(A)
(B)
(C)
(D)
(E)
Sex Bolt Package15-7200-0382-*
$6.60
(A) Double Egress Pull Side15-7200-0517-* (RH)15-7200-0518-* (LH)
$260.00
(B) Free Swing Arm15-7200-0516-*
$215.80
(C) Pull Side Arm15-7200-0515-*
$66.60
(D) Pull Side Track15-7200-0514-*
$191.60
(E) Push Side Arm15-7200-0505-*
$75.90
ElectrifiedClosers
andHolders
131
*specify finish
List price effective November 1, 2015
SMOK-CHEK® VI ������������������������������������������������������������������������������������������������������
(B)
(C)
(D)
(A)
(A) Cover (non-detectored)15-7200-0511-*
$106.80
(A) Cover (detectored)15-7200-0512-*
$87.00
(B) Body Only15-7204-0501-078(RH, 24VAC/DC)15-7204-0503-078(LH, 24VAC/DC)
$605.60
(C) Photo Optic DetectorModule(detectored units only)15-7200-0503-078(24VAC/DC)
$500.00
(D) PC Board20-0099-0611-500 (24V)20-0099-0612-500 (120V)
$190.60
Elec
trifie
dClos
ers
andHo
lders
Electrified Closer/HoldersParts Drawings
132List price effective November 1, 2015
Electrified Closer/HoldersParts Drawings
Models 99-726 and 99-926 ������������������������������������������������������������������������������������
**Hook-up BoxChassis
** Hook-up Board
**Hook-upBox Cover
(B)
(A)
(C)
(D)
(E)
Screw Kit20-0040-0534-*
$23.20
* = specify finish** = not sold separately. Part of hook-up box assembly
(A) Slider Assembly (not visible)20-0099-0337-500 $59.50
(B) Channel (for 99-726)20-0099-0608-* (24V)
$308.30
(B) Channel (for 99-926)20-0099-0609-* (24V)
$308.30
(C) Hook-Up Box Assembly (for 99-726)20-0099-0604-* (24V)20-0099-0605-* (120V)
$138.70
(C) Hook-Up Box Assembly (for 99-926)20-0099-0600-* (24V)20-0099-0601-* (120V)
$122.30
(D) Arm Bracket & Tube20-0099-0516-* $96.80
(E) Adjusting Rod20-0099-0343-* $25.30
ElectrifiedClosers
andHolders
133
*specify finish
List price effective November 1, 2015
Elec
trifie
dClos
ers
andHo
lders
Electrified Closer/HoldersParts Drawings
(A)
Models 99-626 and 99-826 ������������������������������������������������������������������������������������
**Hook-up BoxChassis
** Hook-upBoard
**Hook-upBox Cover
(B)
(C)
(D)
(E)
(F)
Screw Kit20-0040-0534-*
$23.20
* = specify finish** = not sold separately. Part of hook-up box assembly
(A) Slider Assembly (not visible)20-0099-0337-500
$59.50
(B) Channel (for 99-626)20-0099-0608-*
$299.50
(B) Channel (for 99-826)20-0099-0609-*
$729.00
(C) Detector20-0099-0610-500
$166.10
(D) Hook-Up Box Assembly (for 99-626)20-0099-0606-* (24V)20-0099-0607-* (120V)
$218.10
(D) Hook-Up Box Assembly (for 99-826)20-0099-0602-* (24V)20-0099-0603-* (120V)
$176.20
(E) Arm Bracket & Tube20-0099-0516-*
$96.80
(F) Adjusting Rod20-0099-0343-*
$25.30
134List price effective November 1, 2015
www.Rixson.com
RIXSONTel: 800-457-5670Fax: 800-221-0489www.rixson.com
Rixson and Design®, Uni-Chek®. Smok-Check®, Duo-Chek® and Checkmate® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group company.Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.
These materials are protected under U.S. copyright laws. All contents current at time of publication. Copyright©2002-2015, Yale Security Inc., an ASSA ABLOY Group company.All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security, Inc. is prohibited.
44001-11/15
ASSA ABLOY is the global leader in door opening solutions, dedicated tosatisfying end-user needs for security, safety and convenience.
top related