listing constructional data report (cdr) · 2019-07-15 · listing constructional data report (cdr)...
Post on 25-Apr-2020
9 Views
Preview:
TRANSCRIPT
Listing Constructional Data Report (CDR)
Report Number 141017026GZU-001 Original Issued: 24-Oct-2014 Revised: 7-Jul-2016
Standard(s)
Applicant Manufacturer
Address Address
Country CountryContact ContactPhone PhoneFAX FAXEmail Email
Yan Wenxia0769-85723888-328
1.0 Reference and Address
Uni-Trend Technology(China) Ltd
UL 61010-1 Issued: 2012/05/11 Ed: 3 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use - Part 1: General Requirements
CSA C22.2 No.61010-1 Issued: 2012/05/11 Safety Requirements for Electrical Equipment forMeasurement, Control, and Laboratory Use Part 1: General Requirements
UL 61010-2-030 Issued: 2012/05/11 Ed: 1 Safety Requirements For Electrical Equipment ForMeasurement, Control, and Laboratory Use – Part 2-030: Particular Requirements For Testingand Measuring Circuits
CSA-C22.2 No. 61010-2-030:12 Issued: 2012/05/11 Safety Requirements For ElectricalEquipment For Measurement, Control, and Laboratory Use – Part 2-030: ParticularRequirements For Testing and Measuring Circuits
UL 61010-2-033 Issued: 2014/08/08 Ed:1 Safety Req. for Electrical Equipment forMeasurement, Control, & Laboratory Use – Part 2-033: Particular Requirements for Hand-heldMutlimeters & Other Meters, for Domestic & Professional Use, Capable of Measuring MainsVoltage
CSA C22.2 No.61010-2-033 Issue: 2014/12/01 Safety Req. for Electrical Equipment forMeasurement, Control, & Laboratory Use – Part 2-033: Particular Requirements for Hand-heldMutlimeters & Other Meters, for Domestic & Professional Use, Capable of Measuring MainsVoltage
Uni-Trend Technology(China) Ltd
CHINA
yanwx@uni-trend.com.cn
No. 6, Gong Ye Bei 1st Road,Songshan Lake National High-TechIndustrial Development Zone,DONGGUAN Guangdong Province523808 CHINA
0769-85725888yanwx@uni-trend.com.cn
0769-85723888-328
No. 6, Gong Ye Bei 1st Road,Songshan Lake National High-TechIndustrial Development Zone,DONGGUAN Guangdong Province523808 CHINA
Yan Wenxia
0769-85725888
CHINA
Page 1 of 20
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 2 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
ProductBrand name
Models
Model Similarity
Ratings
Other Ratings
2.0 Product Description
Digital multimeterUNI-T
N/A
UT120A: functions of measure with AC/DC voltage, resistance, diode, circuit on-off, frequency,duty ratio, data hold, prompt automatic turn off power and low voltage display for battery;UT120B: functions of measure with AC/DC voltage, resistance, diode, circuit on-off, frequency,duty ratio, capacitor, data hold, prompt automatic turn off power and low voltage display forbattery;
CAT II 600V, powered by battery: CR2032 3V x 1
Description The product covered by this report is a general multimeter for inddor use.
UT120A, UT120B
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 3 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
Photo 1 - Front view of UT120A
Photo 2 - Front view of UT120B
3.0 Product Photographs
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 4 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
3.0 Product PhotographsPhoto 3 - PCB of UT120A
Photo 4 - PCB of UT120A
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 5 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
3.0 Product PhotographsPhoto 5 - PCB of UT120B
Photo 6 - PCB of UT120B
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 6 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
3.0 Product PhotographsPhoto 7 - Probe body
Photo 8 - Probe connector
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 7 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
3.0 Product PhotographsPhoto 9 - Wear indication
Photo 10 - Accessories
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 8 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
Photo #
Item
no.1Name
Manufacturer/
trademark2 Type / model2Technical data and securementmeans
Mark(s) ofconformity
3
KASUN PrintedCircuit Board Co.LTD
KS-01CTI 600V 94V-0O=130℃/S=260℃ UR
Various Various 120℃, flammability of V-0 UR
1 2 Enclosure Material LG Chemical Ltd AF-312V-0,85℃,thickness: 2,58 mm, ABS UR
3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted andonly visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section5.0 for details.
4.0 Critical Components
NOTES:
1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.
2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s)of conformity" can be used.
PCB13
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 9 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
No Unlisted CEC components are used in this report.
5.0 Critical Unlisted CEC Components
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 10 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and displaylamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or othermounting format that prevents turning of the component.
3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or theequivalent.
4. Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a non-metallicenclosure constructed with no openings other than those specifically described in Sections 4 and 5.
5. Grounding -This product is not provided with a means of grounding as it is double insulated.6. Polarized Connection - None.7. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminating
in soldered connections are made mechanically secure prior to soldering. Recognized Componentseparable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other typesspecifically described in the text of this report are also acceptable as internal wiring terminals. At pointswhere internal wiring passes through metal walls or partitions, the wiring insulation is protected againstabrasion or damage by plastic bushings or grommets.
8. Schematics - Refer to Illustration No. 4, 5 for schematics requiring verification during Field RepresentativeInspection Audits.
9. Markings - The product is marked as follows:-brand name-model number-electrical ratings.The markings in French are required:Refer to an Illustration 1 of section 7.0
10. Cautionary Markings - Refer to illustration 1 of section 7.011. Installation, Operating and Safety Instructions -Instructions for installation and use of this product are
provided by the manufacturer. Refer to Illustration 2, 3 for details.
Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of aproduct that has a direct bearing on the product’s conformance to applicable requirements of the productstandard.Construction Details - For specific construction details, reference should be made to the photographs anddescriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to thespecific construction details described in this Report, the following general requirements also apply.
Recognized Component - A component part, which has been previously evaluated by an accredited certificationbody with restrictions and must be evaluated as part of the basic product considering the restrictions as specifiedby the Conditions of Acceptability.
6.0 Critical Features
Unlisted Component - A part that has not been previously evaluated to the appropriate designated componentstandard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing orcomponent recognition.
1. Spacing -Cleareace and creepage distance between outer accessible parts and internal live parts are 5,9mm and 8,6mm for reinforced insulation, respectively.Both cleareace and creepage distance between V terminal and COM terminal are 3,0mm for basicinsulation.
Listed Component - A component part, which has been previously Listed or Certified by an accreditedCertification Organization with no restrictions and is used in the intended application within its ratings.
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 11 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
Illustration 1 - MarkingMarking on the front panel
Marking on the rear panel
Note:Labels of other models are same as shown above
Above ETL logo can be shown in product. Since the dimension of product, state of refer standard is written onmanual.
7.0 Illustrations
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 12 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
7.0 IllustrationsIllustration 2 - Manual (partial)
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 13 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
7.0 IllustrationsIllustration 3 - Manual (Continued)
conforms to UL STD 61010-1, 61010-2-030, 61010-031, certified to CSA STD C22.2 NO.61010-1, 61010-2-030, 61010-031
Illustration 4 - Schematics Schematics of UT120A:
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 14 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
7.0 Illustrations
Illustration 5 - Schematics (Continued)
Schematics of UT120B:
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 15 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
Evaluation Period Project No. 141017026GZU
Sample Rec. Date 17-Oct-2014 Condition Prototype Sample ID.S141017026-001,002
Test Location
Test Procedure
UL 61010-1Issued:2012/05/11 Ed:3rd 2012; CSA-C22.2 NO.61010-1-12, ThirdEdition Issued:2012/05/11Clause
UL 61010-2-030 Issued:2012/05/11 Ed:1; IEC 61010-2-030: 2012,Third EditionIssued:2012/05/11Clause
UL 61010-031Issued:2010/07/29, ED1st, 2007, revision2010;CSA-C22.2No. 61010-1-12,Third EditionIssued:2012/05/11Clause
4.4 -- 4.45.3 -- 5.3
6.3.1 -- 6.3.1 6.3.2 -- 6.3.26.7 -- --6.8 -- 6.6
8.2.1 -- --8.3 -- --10.1 -- 910.1 -- 9
10.5.2 -- 10.2-- 101.3 --
-- 14.101 --
-- -- 6.7.4.1-- -- 6.7.4.2-- -- 6.7.4.3-- -- 6.7.5-- -- 8.1-- -- 8.2-- -- 8.3
Completed by: Reviewed by:Title: Title:
Signature: Signature:
Voltage test and impulse test
8.0 Test Summary
Intertek Testing Services Shenzhen Ltd. Guangzhou Branch(Address: Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, GuangzhouScience City, GETDD, Guangzhou, China)Testing Lab
Test Description
17 Oct 2014~20 Oct 2014
Determination of the result includes consideration of measurement uncertainty from the test equipment andmethods. The product was tested as indicated below with results in conformance to the relevant test criteria.The following tests were performed:
Fault conditionMarking Durability Test
Static test
8.1 Signatures
Equipment temperature limit (normal operation) Equipment temperature limit (abnormal operation) Non-metallic enclosureProtection against mismatches of inputs and ranges
Drop test
Insulation of a probe cable Rigidity test
Permissible limits for accessible part –normal condition Permissible limits for accessible part –Fault condition Creepage distance and clearance
A representative sample of the product covered by this report has been evaluated and found to comply with theapplicable requirements of the standards indicated in Section 1.0.
Drop test Impact swing test
Circuits or components used as TRANSIENTOVERVOLTAGE limiting devices in measuring circuitsused to measure MAINS Steady pull test Flexing/pull test Rotational flexing test
Wincle ShawEngineer
Signature on file
Cupid Qiu
Signature on file
Engineer
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 16 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
BASIC LISTEE
Address
CountryProduct
MULTIPLE LISTEE 1AddressCountry
Brand Name
ASSOCIATEDMANUFACTURER
AddressCountry
BASIC LISTEE MODELS
MULTIPLE LISTEE 2AddressCountry
Brand Name
ASSOCIATEDMANUFACTURER
AddressCountry
BASIC LISTEE MODELS
MULTIPLE LISTEE 3AddressCountry
Brand Name
ASSOCIATEDMANUFACTURER
AddressCountry
BASIC LISTEE MODELS
Digital multimeterCHINA
9.0 Correlation Page For Multiple ListingsThe following products, which are identical to those identified in this report except for model number and Listeename, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program.
Uni-Trend Technology(China) Ltd
No. 6, Gong Ye Bei 1st Road,Songshan Lake National High-TechIndustrial Development Zone,DONGGUAN Guangdong Province523808 CHINA
MULTIPLE LISTEE 2 MODELS
MULTIPLE LISTEE 3 MODELS
None
MULTIPLE LISTEE 1 MODELS
None
None
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 17 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
10.0 General InformationThe Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance withthe requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorizationprior to using alternate parts, components or materials.
COMPONENTSComponents used shall be those itemized in this Intertek report covering the product, including any amendmentsand/or revisions.
LISTING MARKThe ETL Listing mark applied to the products shall either be separable in form, such as labels purchased fromIntertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark issubject to the control of Intertek.
The mark must include the following four items:
1) applicable country identifiers "US" and/or "C" or "US", "C" and "EU"2) the word "Listed" or "Classified" or "Recognized Component" (whichever is appropriate)3) a control number issue by Intertek4) a product descriptor that identifies the standards used for certification. Example:
For US standards, the words, “Conforms to” shall appear with the standard number along with the word, “Standard” or “Std.” Example: “Conforms to ANSI/UL Std. XX.”
For Canadian standards, the words “Certified to CAN/CSA Standard CXX No. XX.” shall be used, orabbreviated, “Cert. to CAN/CSA Std. CXX No. XX.”
Can be used together when both standards are used.
Note: A facsimile must be submitted to Intertek, Attn: Follow-up Services for approval prior to use.The facsimile need not have a control number. A control number will be issued after signed CertificationAgreements have been received by the Follow-up Services office, approval of the facsimile of yourproposed Listing Mark, satisfactory completion of the Listing Report, and scheduling of a factoryassessment in your facility.
MANUFACTURING AND PRODUCTION TESTSManufacturing and Production Tests shall be performed as required in this Report.
FOLLOW-UP SERVICEPeriodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shallbe scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to thefollowing:
1. Conformance of the manufactured product to the descriptions in this Report.2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement.3. Manufacturing changes.4. Performance of specified Manufacturing and Production Tests.
In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, theApplicant shall take one or more of the following actions:
1. Correct the non-conformance.2. Remove the ETL Mark from non-conforming product.3. Contact the issuing product safety evaluation center for instructions.
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 18 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
10.1 Evaluation of Unlisted Components
Note to Intertek Follow Up Inspector: The Component Evaluation Center, CEC, will notify you in writingwhen these components must be selected and sent to the CEC for re-evaluation
Ship the samples to:Intertek Testing Services Shenzhen Limited Guangzhou BranchETL Component Evaluation CenterBlock E, No. 7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou ScienceCity
CETDD Guangzhou, China.Attn: Ms. Joey KuangSample Disposition: Due to the destructive nature of the testing, all samples will bediscarded at the conclusion of testing unless, the manufacturer specifically requests thereturn of the samples. The request for return must accompany the initial component
shipment.
Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program,Intertek may require these components to be tested and/or evaluated at least once annually, more often forcertain components, as part of the independent certification process. The Unlisted Components in Section 5.0require testing and/or evaluation as indicated.
ED 16.3.15 (1-Jul-16) Mandatory
Report No. 141017026GZU-001Uni-Trend Technology(China) Ltd
Page 19 of 20 Issued: 24-Oct-2014Revised: 7-Jul-2016
Product Test Voltage Test TimeAll products covered by this Report.ACCESSIBLE conductive parts and live part of terminals 900V 2 s
Products Requiring Dielectric Voltage Withstand Test:
Method
The test voltage specified below shall be applied between primary circuits and accessible dead-metal parts. Thetest voltage may be gradually increased to the specified value but must be maintained at the specified value forone second or one minute as required.
One hundred percent of production of the products covered by this Report shall be subjected to a routineproduction line dielectric withstand test.
11.0 Manufacturing and Production TestsThe manufacturer agrees to conduct the following Manufacturing and Production Tests as specified:
Required TestsDielectric Voltage Withstand Test
If the rated output of the test equipment is 500VA or more, the applied test potential may be indicated by either:1 - a voltmeter in the primary circuit;2 - a selector switch marked to indicate the test potential; or3 - a marking in a readily visible location to indicate the test potential for test equipment having a single testpotential output.In cases 2 and 3, the test equipment shall include a lamp or other visual means to indicate that the test potentialis present at the test equipment output. All test equipment shall be maintained in current calibration.
11.1 Dielectric Voltage Withstand Test
Test Equipment
The test equipment shall incorporate a voltmeter in the output circuit to indicate directly the applied test potentialif the rated output of the test equipment is less than 500VA.
The test equipment shall incorporate a transformer with an essentially sinusoidal output, a means to indicate theapplied test potential, and an audible and/or visual indicator of dielectric breakdown.
The test shall be conducted on products, which are fully assembled. Prior to applying the test potential, allswitches, contactors, relays, etc., should be closed so that all primary circuits are energized by the test potential.If all primary circuits cannot be tested at one time, then separate applications of the test potential shall be made.
ED 16.3.15 (1-Jul-16) Mandatory
top related