lesson declared p[h] after finished this lesson student will to able to # say about p[h]. # say...

Lesson declared

p[H]

• After finished this lesson student will to able to

• # Say about p[H].

• # Say about pH indicators.

• # Say about Buffer solution.

• However, it is possible to measure the concentration of hydrogen ions directly, if the electrode is calibrated in terms of hydrogen ion concentrations. One way to do this, which has been used extensively, is to titrate a solution of known concentration of a strong acid with a solution of

p[H]

• known concentration of strong alkali in the presence of a relatively high concentration of background electrolyte. Since the concentrations of acid and alkali are known, it is easy to calculate the concentration of hydrogen ions so that the measured potential can be correlated with concentrations. The calibration is usually carried out using a Gran plot.

The calibration yields a value for the standard electrode potential, E0, and a slope factor, f, so that the Nernst equation in the form can be used to derive hydrogen ion concentrations from experimental measurements of E.

pH indicators

pOH

• pOH is sometimes used as a measure of the concentration of hydroxide ions, OH−, or alkalinity. pOH values are derived from pH measurements. The concentration of hydroxide ions in water is related to the concentration of hydrogen ions by

• where KW is the self-ionisation constant of water. Taking logarithms

So, at room temperature pOH ≈ 14 − pH. However this relationship is not strictly valid in other circumstances, such as in measurements of soil alkalinity.

Applications

Buffer solution

• A buffer solution (more precisely, pH buffer or hydrogen ion buffer) is an aqueous solution consisting of a mixture of a weak acid and its conjugate base, or vice versa. Its pH changes very little when a small or moderate amount of strong acid or base is added to it and thus it is used to prevent changes in the pH of a solution. Buffer solutions are used as a means of keeping

• pH at a nearly constant value in a wide variety of chemical applications. Many life forms thrive only in a relatively small pH range so they utilize a buffer solution to maintain a constant pH. One example of a buffer solution found in nature is blood..

Buffer capacity

• Buffer capacity, β, is a quantitative measure of the resistance of a buffer solution to pH change on addition of hydroxide ions. It can be defined as follows.

• where dn is an infinitesimal amount of added base and d(p[H+]) is the resulting infinitesimal change in the cologarithm of the hydrogen ion concentration. With this definition the buffer capacity of a weak acid, with a dissociation constant Ka, can be expressed as

• # what is p[H].

• # Describe about pH indicators.

• # Explain Buffer solution.