lecture 3galatusr/pdfs/master_soai/curs/c3... · 2020. 4. 3. · a. rieznik and h. l. fragnito,...
Post on 20-Oct-2020
4 Views
Preview:
TRANSCRIPT
-
Optical sensors with industrial application: design software
Lecture 3
Assoc prof. dr ing. Ramona Galatus
-
• Resurse necesare pentru proiectul de tip eseu
• Evaluare: Nota finala=40% teorie (examen scris si prezenta curs)+40% (proba orala: eseu -20% siproiect-20%) +20% laborator
• Mentiune- fiecare nota in parte > 4.5
-
Resurse utile pentru proiectul de tip eseu
• Opening ceremony http://www.light2015.org/Home/Event-Programme/2015/Other/Opening-Ceremony.html
• http://www.osa.org/en-us/about_osa/international_year_of_light/
• http://www.world-of-photonics.com/trade-fair/events/program-highlights/international-year-of-light/
• https://www.youtube.com/watch?v=54XWR-J02Ms
• https://www.youtube.com/watch?v=eodXu0t78ns&list=PLIq5W94kYr7Y70lqWZ5lww8bO63TecJjp&index=8
• http://www.unesco.org/new/fileadmin/MULTIMEDIA/HQ/SC/pdf/Sponsorship_Package.pdf
http://www.light2015.org/Home/Event-Programme/2015/Other/Opening-Ceremony.htmlhttp://www.osa.org/en-us/about_osa/international_year_of_light/http://www.world-of-photonics.com/trade-fair/events/program-highlights/international-year-of-light/https://www.youtube.com/watch?v=54XWR-J02Mshttps://www.youtube.com/watch?v=eodXu0t78ns&list=PLIq5W94kYr7Y70lqWZ5lww8bO63TecJjp&index=8http://www.unesco.org/new/fileadmin/MULTIMEDIA/HQ/SC/pdf/Sponsorship_Package.pdf
-
EXAMPLE OF MASTER IN PHOTONICS - BRUSSELS
-
Lectures – Books (References section on Teams)• A se consulta Fisa disciplinei SOAI (actualizare datorita pandemiei
COVID-19) – in acest context au fost realizate 5 lucrari practice de laborator si vor fi realizate in continuare proiecte cu lucrari teoretice de simulare pana la sfarsitul official al acestei perioade)
-
Content
• Design software• Component based• System based
• Examples
-
I. Definition - review
Optical sensor- a photonic system in which the input signal (Vi), introduces modifications or modulation of light characteristics (transmission, intensity, dispersion, Reflection, absorption etc) , that after being detected and
processed will deliver an output signal (Vout, usually in electrical domain) which will be a valid reproduction of
object variable
Conceptual block diagram of
the Optical Sensor (OS) system
Differences:
Sensor
Transducer/Traductor
Adjust system operating
-
Definition – lecture 3
-
System with optical sensor
-
Software classification
• Component based:
• Ray optics, BPM (Beam propagation methods), FDTD, FEM (Finite Element Methods)
• Optiwave, https://optiwave.com/resources/latest-news/photonic-crystal-fiber-bio-chemical-sensor-using-optimode/
• Technixbycb: https://technixbycbs.com/index.php
• Lumerical, https://www.lumerical.com/
• Fimmwave, -https://www.photond.com/products/fimmwave/fimmwave_features_10.htm
• Comsol, https://www.comsol.com/blogs/silicon-photonics-designing-and-prototyping-silicon-waveguides/
• CST, https://www.3ds.com/products-services/simulia/products/cst-studio-suite/
• Zemax, https://www.zemax.com/
• Rsoft/ Synopsis: https://www.synopsys.com/photonic-solutions/rsoft-system-design-tools.html
• QUICKWave: https://www.qwed.com.pl/academic.html
• http://www.photond.com/products/fimmwave/fimmwave_applications_05.htm
• System based:
• VPIPhotonics, https://www.vpiphotonics.com/index.php
• Optiwave, OptiSystem https://optiwave.com/resources/latest-news/photonic-crystal-fiber-bio-chemical-sensor-using-optimode/
• Liekki - https://www.photonicsonline.com/doc/liekki-announces-application-designer-v33-and-0001 and https://www.nlight.net/optical-fibers-products and https://en.freedownloadmanager.org/Windows-PC/Liekki-Application-Designer.html and https://www.electrooptics.com/press-releases/liekki-application-designer-v40
Reference: http://optical-waveguides-modeling.net/tutorial-optical-fiber.jsp
https://optiwave.com/resources/latest-news/photonic-crystal-fiber-bio-chemical-sensor-using-optimode/https://technixbycbs.com/index.phphttps://www.lumerical.com/https://www.photond.com/products/fimmwave/fimmwave_features_10.htmhttps://www.comsol.com/blogs/silicon-photonics-designing-and-prototyping-silicon-waveguides/https://www.3ds.com/products-services/simulia/products/cst-studio-suite/https://www.zemax.com/https://www.synopsys.com/photonic-solutions/rsoft-system-design-tools.htmlhttps://www.qwed.com.pl/academic.htmlhttp://www.photond.com/products/fimmwave/fimmwave_applications_05.htmhttps://www.vpiphotonics.com/index.phphttps://optiwave.com/resources/latest-news/photonic-crystal-fiber-bio-chemical-sensor-using-optimode/https://www.photonicsonline.com/doc/liekki-announces-application-designer-v33-and-0001https://www.nlight.net/optical-fibers-productshttps://en.freedownloadmanager.org/Windows-PC/Liekki-Application-Designer.htmlhttps://www.electrooptics.com/press-releases/liekki-application-designer-v40http://optical-waveguides-modeling.net/tutorial-optical-fiber.jsp
-
Steps to design theintegrated optics component
• https://www.laserfocusworld.com/software-accessories/software/article/16555799/integrated-optics-simulation-and-design-tools-address-demands-of-wdm
https://www.laserfocusworld.com/software-accessories/software/article/16555799/integrated-optics-simulation-and-design-tools-address-demands-of-wdm
-
Liekki - http://www.nlight.net/(Finland)
Erbium Doped fibers 20μm- and 25μm-core, double-clad fibers,
code Yb 1200 -25 -250DC, provider Liekki Oy
•λs = 1.064μm, Ps = 300 mW, λP = 976 nm, Pp = 30 W
allows optical component and system design engineers to
determine:
-the tradeoffs between EDFAs, EYDFs, EYDWs, YDFs,
-performance by calculating how metrics such as
max output power, min noise figure, min gain ripple,
and minimum pump power
depend on device specifications such as:
pump wavelength range, passive component losses.
The component library includes single or double-clad fibers,
static and dynamic amplifiers.
http://www.nlight.net/
-
Fiber Refractive Index Profile
• Lecture 1 – slide 41
g-index profile:g=1 – triangleg=2- parabolicg=∞ - step index
-
A top-view - qualitative idea about the core coverage
Power density in M1
0
1
2
3
4
5
6
-42 -25.2 -8.4 8.4 25.2 42
axial power distribution
-
CST
-
https://www.researchgate.net/publication/334533575_Brillouin_optomechanics_in_nanophotonic_structures
https://www.researchgate.net/publication/334533575_Brillouin_optomechanics_in_nanophotonic_structures
-
Lecture 2 – slide 20
-
2D optical waveguide Reference: Hiroshi Nishihara – Optical Integrated Circuits
-
Modes propagation in the optical waveguideReference: Hiroshi Nishihara – Optical Integrated Circuits
-
Gooth Hanchen Shifts
-
Common 3D waveguide structures
-
Macatili Method
-
3D waveguides examples
-
Coupler
-
Operating principle of the coupler
-
Coupling theory
-
Gratings (retele de difractie)
-
Grating fabricationhttps://www.3sae.com/products/noria_fbg.php
https://www.3sae.com/products/noria_fbg.php
-
VPISystem (VPIPhotonics)
Example
http://www.vpiphotonics.com/CMActivePhotonics.php
http://www.vpiphotonics.com/Applications.phphttp:///www.vpisystems.com/products/oneplan/transport/http://www.vpiphotonics.com/LinkConfigurator.phphttp://www.vpiphotonics.com/VPIplayer.phphttp://www.vpiphotonics.com/TMOpticalSystems.phphttp://www.vpiphotonics.com/CMOpticalAmplifiers.phphttp://www.vpiphotonics.com/CMActivePhotonics.php
-
Transmitters
The optical spectrum of the DFB laser output is shown below.
There is only one mode in the spectrum.
The signal mode only takes up a very narrow bandwidth, which can efficiently be used in WDM systems.
-
Applications• Design high-capacity WDM systems including novel modulation schemes, CD and PMD compensation, Raman and hybrid
amplification, optical signal processing, optical channel monitoring
• Develop high-performance & cost-effective solutions for 100GbE using coherent detection and digital signal processing.
• Evaluate risks in component choice by considering the details of systems design.
• Assess component performance in a virtual test-bed to develop component specifications.
• Perform quick WDM system design evaluation using link performance analysis functions and engineering design rules.
• Evaluate crosstalk and dynamics in reconfigurable DWDM networks due to power transients and test countermeasures.
• Evaluate advantages of modulation formats like Duobinary, CSRZ, mQAM, PSBT, (CSRZ-)DPSK, (RZ-)DQPSK.
• Explore several Tbit/s systems using C, L and S band windows
• Develop Ultra Long Haul amplified systems and submarine systems.
• Select technologies (CWDM, PON, ROADM, RSOA) and topologies of aggregation and distribution networks.
• Evaluate schemes for microwave and RF-over-Fiber systems carrying wireless formats (WiFi, WiMax, UMTS, CDMA).
• Quantify fiber-induced signal degradation from CD, Kerr, PMD, SRS, SBS, reflections.
• Evaluate new aggregation formats such as optical CDMA and optical SCM-OFDM.
• Investigate the feasibility of upgrading analog HFC networks with digital services.
• Identify critical design parameters including laser chirp, RIN, amplifier gain-tilt and noise, path loss, and filtering.
• Maximize the capacity of the fiber plant using bidirectional transmission.
-
Optiwavehttp://optiwave.com
BPM - finite difference beam propagating method –solves Maxwell's equations by using finite differences in place of
partial derivatives. Works in the frequency domain, and as such only weak non-linearities can be modelled
FDTD-Finite Difference Time Domain-ability to model light propagation, scattering and diffraction, and reflection and
polarization effects. It can also model material anisotropy and dispersion without any pre-assumption of field behavior
such as the slowly varying amplitude approximation. The method allows for the effective and powerful simulation and
analysis of sub-micron devices with very fine structural details. A sub-micron scale implies a high degree of light
confinement and correspondingly, the large refractive index difference of the materials (mostly semiconductors) to be
used in a typical device design.
-
Microring Sensors
-
OptiSPICE
NetList
-
Applications:
• WDM/TDM or CATV network design
• SONET/SDH ring design
• Transmitter, channel, amplifier, and receiver design
• Dispersion map design
• Estimation of BER and system penalties• with different receiver models
• Amplified System BER and link budget calculations
Related publications:
V. Roncin et al., System characterization of a passive 40 Gb/s All Optical Clock Recovery ahead of the receiver, Opt. xpress 15, 6003 (2007).
N. Antoniades et al., Value proposition for amplets as banded amplification solutions in evolving WDM metro network architectures, J. Opt. Netw. 4, 101 (2005).
A. Rieznik and H. L. Fragnito, Analytical solution for the dynamic behavior of erbium-doped fiber amplifiers with constant population inversion along the fiber, J. Opt. Soc. Am. B 21, 1732 (2004).
http://www.opticsinfobase.org/abstract.cfm?URI=oe-15-10-6003http://www.opticsinfobase.org/abstract.cfm?URI=JON-4-3-101http://www.opticsinfobase.org/abstract.cfm?URI=josab-21-10-1732
-
RSofthttp://rsoftdesign.com/products.php?sub=Product+Overview
http://www.rsoftdesign.com/products.php?sub=Component+Design&itm=BeamPROP
planning, optimization, modeling and simulation software tools and services offer a
preview of end results, allowing our customers-and their customers-to quickly make
definitive design choices. It helps to demonstrate value across the spectrum...
Component Design Suite - analyze complex photonic devices and components
through industry-leading computer aided design
System Simulation - determine the performance of optical telecom and datacom links
through comprehensive simulation techniques and component models
Network Modeling - cost-effectively deploy DWDM and SONET technologies while
designing and optimizing an optical network
http://rsoftdesign.com/products.php?sub=Product+Overview
-
www.opticalres.com
LighTools
-
http://www.opticalres.com/cv/CODEV.pdf
Code V
-
Zemaxhttp://www.optima-research.com/index.php?page=zemax-features
http://www.thorlabs.de/software_pages/ViewSoftwarePage.cfm?Code=Zemax
http://www.optima-research.com/index.php?page=zemax-features
-
GLAD
• Laser and Physical Optics Design Software (www.aor.com)
top related