lattice boom crawler crane - pickles
Post on 16-Oct-2021
5 Views
Preview:
TRANSCRIPT
Accreditation no. 19898
Div of The Crane Industry Council of AustraliaABN 73 002 565 773
PO Box 136MOUNT WAVERLEY VIC 3149
P: +61 (03) 9501 0078E: assessments@cranesafe.com.au
LATTICE BOOM CRAWLER CRANEAnnual Report
Company ASC Pty Ltd ABN 45 051 762 639
Address 649 Mersey Road North OSBORNE Representative Mr Jeff Smith
State SA Phone 08 7423 4316
Postcode 5017 Email jeff.smith@ausawd.com
Make Manitowoc
Model 21000
Serial Number 2100 1014
Plant Number N/A
Year of Manufacture 2010
Design Registration Number NOT SIGHTED
Plant Registration NOT SIGHTED
Max Load 907000kg
Upper Hours 6838
Country where assessed Australia State SA
Operators Manual in English OK
Log Book OK
Maintenance Records OK
Crane Safety Manual No
Assessed By Phillip Young Company Titan Crane & Inspection Services Pty
LtdReg. No. SA1072 Address 12-14 Kenworth Road GEPPS CROSS
Phone 0429 993 308 State SA
Email phillip@titanfan.com.au Postcode 5094
Initital Inspection Date 27/03/2019 Issued Date 15/04/2019
Re-Inspection Date 12/04/2019 Expiry Date 12/04/2020
Conforms to Checklist YesThis report is confirmation that the crane has undergone an annual inspection to the appropriate standard and is considered safefor continued operation at time of inspection.
Actions Required - NA
No. LBCC A 137269-8
Accredited for compliance with ISO/IEC 17020NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 1 of 23
BOOM AND ATTACHMENTS
Boom Base Section OKBoom Foot Pins and Bushings OKBoom Inserts OKBoom Point Section OKPoint Shaft and Sheaves OKBoom Point Guard OKIdler Sheaves OKBoom Hoist Limit OKSuspension Cables / Rods OKIntermediate Suspension N/ACable Rollers - Guards OKMast - Upper Spreader OKBackstops OKGantry OKLower Spreader OKBoom Angle Indicator OKBoom Base Sheave OKJib Base Section N/AJib Point Section N/AJib Inserts N/AJib Struts N/AJib Suspension Cables N/AFairlead N/ATag Line Winder N/ALuffing Jib(s) N/AHeavy Lift Attachments N/AAnemometer REMEDIED -
Boom Head OKRooster Sheave OKExtension / Fly N/A
HOOK BLOCKSDescription hook blockBranded WLL (kg) OK 544000kgManufacturers Identification OK - 01043957Safety Latches OKSheaves and Bearings OK - 15Swivel OKBranded with Tare Weight (kg) OK 16800kg
HOOK BLOCKS No. 2Description Aux HookBranded WLL (kg) OK 27000kgManufacturers Identification OK - 01044163Safety Latches OKSheaves and Bearings N/ASwivel OKBranded with Tare Weight (kg) OK 1200kg
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 2 of 23
REVOLVING FRAME AND CABIN
Frame - Structural OKCounterweight - Security OK - to manufactures specificationCounterweight Hazard Striping N/A - spotters used when slewing and trackingCounterweight Lift Assembly N/AA Frame OKGear Case Cover(s) OKGaskets and Seals OKCab Glass and Mirrors OKSheet Metal and Paint OKSeat Assembly OKThrottle OKDead Man Controls OKFree Fall Lockout N/ADecals / Signs - In English OKLoad Charts in English as per AS1418 OKControl Levers - Clearly Marked OKControl Cables / Pilot Hoses OKHeater OKAir Conditioner REMEDIED - fan faulty repaired by ACMGauges OKAnti-Two block Alarms OKHorn OKAccess Steps OKDoors and Locks OKCab Mounts OKFront Wiper REMEDIED -Roof Wiper OKWindscreen Wiper / Washer OKSwitches and Relays OKInclinomoter OKFire Extinguisher OK
SLEW SYSTEM
Slew Transmission & Oil Level OK - oil level not checkedLeaks OKSwing Brake OKLock Valve(s) N/AHouse Lock N/ASlew Pinion OK - visualSlew Gear OK - visualSlewing Ring OK - visualBase Weld OK - visualSmooth Operation OKSlew Bolts OK - visualExcessive Bearing Play OK - visualExcessive Backlash OK - visualElectrical Swivel OKRoller Path N/ARoller Circle N/AHook Rollers N/ASlewing Rim N/A
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 3 of 23
[[reportTextBelow]]
REAR DRUMSHAFT (HOIST) WINCH
Winch Condition & Oil Level OK - oil level not checkedClutch Assembly N/A - hydraulic driveClutch Band and Linings N/ACylinder and Swivel N/ABrake Band and Lining N/ABrake Control Linkage N/AOperating Cylinder(s) N/ADrum Locking Pawl Mechanism OKClutch Drum(s) N/ALagging N/AWire Rope OKCorrect Assembly and Connection of Jib HoistRope Socket
OK
Planetary Drum and Pinions N/APlanetary Band and Lining N/AOperating Cylinder(s) N/ABrake Control Linkage N/AGear Case Seal(s) OK
MAIN HOIST ASSEMBLY WINCH
Winch Condition & Oil Level OKClutch Assembly N/A - hydraulic driveClutch Band and Linings N/ACylinder and Swivel N/APlanetary Band and Lining N/ABrake Band and Lining N/APawls and Linkage OKOperating Cylinder(s) OKDrums and Wire rope OKCorrect Assembly and Connection of Hoist RopeSocket
OK
Boom Hoist Chaincase N/AShaft Assembly N/A
AUXILIARY HOIST ASSEMBLY WINCH
Winch Condition & Oil Level OKClutch Assembly N/A - hydraulic driveClutch Band and Linings N/ACylinder and Swivel N/APlanetary Band and Lining N/ABrake Band and Lining N/APawls and Linkage OKOperating Cylinder(s) N/ADrums and Wire rope OKCorrect Assembly and Connection of Hoist RopeSocket
OK
Boom Hoist Chaincase N/AShaft Assembly N/A
THIRD DRUM ASSEMBLY WINCH - NA
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 4 of 23
[[reportTextBelow]]
HYDRAULIC SYSTEM
Hydraulic Reservoir & Oil Level OKReturn Filters and Housing OKSuction Lines and Hoses OKOil Cooler(s) OKMain Pump(s) OKSlew Pump OKPilot Pump N/ARelief Valves N/APressure Filter and Housing OKSlew Motor OKSlew Valve OKMain Winch Motor OKAuxiliary Winch Motor OKMain Winch Valve OKAuxiliary Winch Valve OKPressure Lines and Hoses OKAccumulator N/ACarbody Hydraulic System OKHydraulic Swivel OKHoses and Tubes OKPropel Transmission N/APropel Motors N/ARelief Valves N/APropel Brake N/AAxle Extension N/AControl Valve N/AHorizontal Cylinders N/AVertical Cylinders OK
AIR SYSTEMS - NA
ELECTRICAL SYSTEMS
Battery Box OKBattery Cables OKBattery Isolator OKStarter OKClearance Lights N/AFlood Lights N/ACircuit Breakers OKSwitches and Relays OKRotating Beacon(s) N/ASlew Alarm N/A - spotters usedTravel Alarm N/A - spotters used
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 5 of 23
DRIVE SYSTEM
Radiator & Coolant Level OKRadiator Hoses OKFan OKFan Guard N/AOil Cooler(s) OKFuel Lines OKThrottle OKEngine Oil Pressure & Oil Level OKEngine Mounts OKPower Transmission Belts OKMuffler / Spark Arrestor OKAbnormal Engine Noises OKFuel Tank & Diesel Level OKEngine Warning System OKDrive Coupling N/APump Drives N/APump Disconnects (PTO) N/A
CRAWLER INSPECTION
Paint OKDecals / Signs - In English OKCarbody and Crawler Frames OKSide Frames and Axles OKConnecting Bolts OKDrive Sprockets OKIdler Sprockets OKCrawler Rollers OKPins and Bushings OKRoller Guards OKRail Assembly OKTrack Adjuster OKTension Spring Assembly N/ATrack Shoes OKPropel Chains N/APropel Clutch Shaft N/AClutch Drum(s) N/AClutch Assembly N/ABand and Lining N/ACylinders and Swivel N/ABevel Gears N/AVertical Propel Shaft N/AHorizontal Propel Shaft N/AOutboard Propel Shafts N/APropel Shaft Extension N/ASteering Assembly N/ABrake Drums N/ACrawler Brake Assembly N/ACarbody OKHydraulic Drive OKPlanetary Reductions OKDrive Motors OK
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 6 of 23
Any third party testing is not included in the Crane Safe NATA accreditation.
FUNCTIONAL TESTS - MAIN WINCH
Load Chart Reference Number 8187 BM Maxer 110680kgPrinted Chart - No Load OK
Printed Chart Rated Capacity Indicator
Boom Angle, deg 51.30 51.20
Boom Length, m 85.30m 85.30m
Radius, m 56.00m 56.00m
Load, kg 84200kg 84400kg
o o
RCI Load Charts 75%
Load Chart Reference Number 8187 BM Maxer 110680kgRated Load in Stability OK - 40660kg 2 x counter weghts hook 16800 hook 1200kg 6400kg
winch rope
Rated Capacity Indicator Measured
Radius, m 66.00m 65.00m
Load, kg 65900kg 40660kg
Line Pull Test OK
Rated Capacity Indicator Measured
Load, kg 22100kg 22100kg
Winch Brake Test OK
Rated Capacity Indicator Measured
Load, kg 22100kg 22100kg
Overload Warning Lights and Alarms OKRated Capacity Limiter Fitted (Overload Limiter) OK
FUNCTIONAL TESTS - AUXILIARY WINCH
Load Chart Reference Number 8187 BMMaxer 110680kgRated Load in Stability N/ALine Pull Test OK
Rated Capacity Indicator Measured
Load, kg 22100kg 22100kg
Winch Brake Test OK
Rated Capacity Indicator Measured
Load, kg 22100kg 22100kg
Overload Warning Lights and Alarms OKRated Capacity Limiter Fitted (Overload Limiter) OK
CRACK INSPECTION
No Cracks Detected OK
ADDITIONAL ANNUAL INSPECTIONS STIPULATED BY THE MANUFACTURER - NA
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 7 of 23
SITE REQUIREMENTS - NANo. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 8 of 23
CRANE
ASSESSMENT
APPENDICES
Model
Serial Number
Upper Hours
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 9 of 23
ASSESSMENT
BOOM AND ATTACHMENTS
REVOLVING FRAME AND CABIN
Log Book
Anemometer
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 10 of 23
REVOLVING FRAME AND CABIN
REAR DRUMSHAFT (HOIST) WINCH
MAIN HOIST ASSEMBLY WINCH
Air Conditioner
Front Wiper
Correct Assembly and Connection of Jib Hoist Rope Socketboth ends of cable anchored at drum
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 11 of 23
Correct Assembly and Connection of Hoist RopeSocket
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 12 of 23
AUXILIARY HOIST ASSEMBLY WINCH
Correct Assembly and Connection of Hoist RopeSocket
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 13 of 23
Correct Assembly and Connection of Hoist RopeSocket
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 14 of 23
Correct Assembly and Connection of Hoist RopeSocket
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 15 of 23
FUNCTIONAL TESTS - MAIN WINCH
Correct Assembly and Connection of Hoist RopeSocket
Load Chart Reference Number
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 16 of 23
Rated Load in Stability - Load RCI
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 17 of 23
Rated Load in Stability - Radius Measured
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 18 of 23
Rated Load in Stability - Radius Measured
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 19 of 23
Rated Load in Stability - Radius RCI
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 20 of 23
Rated Load in Stability - Load Measured
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 21 of 23
Rated Load in Stability - Load Measured
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 22 of 23
Line Pull Test - Load RCI
No. LBCC A 137269-8
© The Crane Industry Council of Australia 2009All CraneSafe forms, checklists, surveys, audits and reports together with the embedded methodology contained within are the intellectual property of The
Crane Industry Council of Australia and may not be use without The Crane Industry Council of Australia's prior written consent.
Page 23 of 23
Customer: ASC Shipbuilding
Make: Manitowoc
Model: 21000
Serial No: 21001014 Job No: 305233
Service type/hrs: 1000hr MEX.No
SERVICE REQUIREMENTS 250 500 750 1000 Initials Note.no
Clean and check all windows for cracks P P P P J.K.
Clean all debris from crane P P P P J.K.Check for leaks (fuel, coolant, gear oil, engine oil, hydraulic
oil) Correct cause & fill faulty unit to proper level P P P P H.P.
Apply open gear oil to ring gear P P P P J.K.
Check fuel tank level & drain water from bottom of tank P P P P J.K.Check radiator coolant level when cold. Check Auto lube
system P P P P J.K.
Service engine P P P P H.P.
Check that fire extinguisher is on crane & fully charged P P P P H.P.Check that operators manual & capacity charts are in
operator's cab P P P P J.K.Check operating limit & system fault alerts for proper
operation - red & yellow lights, buzzer & beeper should
come on for approx. 3 seconds when cab power switch is on
& ignition switch is move to RUN position P P P P J.K.Check seat switch for proper operation - all control handles
& corresponding function should be inoperable when
operator is out of seat P P P P J.K.
107410
Workshop departure
Site arrival
Site departure
Workshop arrival
Technician Name: Johnathon/Harry
Possible rear main quick
couplings leaking
Date: 10.07.2018
Hour Meter: 6802
Key Points
MANITOWOC 21000 SERVICE REPORT
Page 1
SERVICE REQUIREMENTS 250 500 750 1000 Initials Note.no
Check digital display on control console for proper readings P P P P J.K.Replace hydraulic filters if digital display indicates need &
system fault alert is on (oil at operating temperature) P P P P
Check swing lock for proper operation, must hold crane in
position when engage & allow crane to swing when
disengaged P P P P J.K.Check each drum pawl for proper operation, must fully
engage & disengage ratchet P P P P J.K.Check park modes for proper operation - handles &
corresponding functions (drum or travel) must be
inoperable when park switches are on P P P P J.K.
Test each drum brake for proper operation with load lifted a
few feet off ground. While slowly hoisting or lowering,
move drum handle to off. Load must come to complete stop P P P P J.K.Check that boom hoist brake holds boom in position when
boom hoist handle is off P P P P J.K.Test travel brakes while slowly traveling in either direction.
Move crawler to off. Crane must come to complete stop &
brakes must hold crane in position. P P P P
Check that swing holding brake holds upper works in
position when swing handle is off. Handle should be
inoperable. P P P P J.K.Test rotation indicators for proper operation. P P P P J.K.Check load moment indicator for proper operation. P P P P J.K.
Check that wire rope is spooled properly on drums &
through sheaves before raising boom & loads from ground. P P P P J.K.Grease crane and MAXER P P P P H.P.
SERVICE REQUIREMENTS 250 500 750 1000 Initials Note.noKey Points
Unable to test drive due to
area restrictions
Key Points
Page 2
Oil all pins not equipped with grease fittings P P P P H.P.Check battery electrolyte level P P P P J.K.Inspect rotating bed, car body, crawler, & all beams for
cracks or other damage P P P P J.K.Check that all pins are in place & properly retained in
rotating bed, car body, crawlers & all beams P P P P J.K.Check that all bolts & screws are in place & tight in rotating
bed, carry body, crawlers & all beams. P P P P J.K.Check crawlers for proper adjustment P P P P J.K.Inspect that all boom & gantry pins & bolts are in place &
tight P P P P
Inspect all sheaves for wear and damage P P P P J.K.Inspect all wire rope for broken wires or excessive wear and
for proper spooling on drums & reeving through sheaves;
lubricate wire rope if needed. P P P P J.K.
Inspect each hook for cracks or deformation P P P P
Clean breather on hydraulic tank, on each planetary gear
box, on pump drive & on hydro-coupler pumps P P P P J.K.Test all disc brakes (Drum, swing, travel) for proper
operation P P P P N/ATest each limit device for proper operation P P P P
- Boom up limit P P P P
- Boom down limit P P P P
- Minimum bail limit P P P P
- Maximum bail limit P P P P
- Block up limit P P P P
- Any other limit crane is equipped with P P P P
Main winch 1st boom sheave seized
Unable to do due to area restrictions
Unable to do due to area restrictions
Unable to do due to area restrictions
Unable to do due to area restrictions
Unable to do due to area restrictions
Unable to do due to area restrictions
Unable to do due to area restrictions
Unable to do due to area restrictions
Page 3
SERVICE REQUIREMENTS 250 500 750 1000 Initials Note.no
Check maxxer tire pressure (if equipped) & reinflate as
required P P P P J.K.Check level of pump drive and each planetary gear box P P P P J.K.
Check adjustment of boom angle indicator potentiometer P P P P J.K.Engage & disengage engine clutch several times with engine
running to clean discs P P P P J.K.Check tension of V-belts (See engine manual) P P P P H.P.Service battery (Clean and inspect) P P P P J.K.Check load moment indicator for proper calibration P P P P J.K.Replace Engine oil P P P P H.P.Replace engine oil filter P P P P H.P.Replace fuel filters x 2 P P H.P.replace fuel water seperation filter P P H.P.
Replace air filter x 2 P P H.P.
Replace coolant filter P P H.P.
Replace hydraulic tank filters x 2 P H.P.
Replace pump filters x 13 P H.P.
Hydraulic tank breather filter x 1 P J.K.
Airconditioning filter cab P H.P.
Kideny filters x 2 P H.P.
Oil sample right front outer hub P J.K.
Oil sample right front inner hub P J.K.
Oil sample left front outer hub P J.K.
Oil sample left front inner hub P J.K.
Inspected - All good
Key PointsVisual inspection
2 degrees out
Page 4
Oil sample right rear outer hub P
SERVICE REQUIREMENTS 250 500 750 1000 Initials Note.no
Oil sample right rear inner hub P J.K.
Oil sample left rear outer hub P J.K.
Oil sample left rear inner hub P J.K.
Oil sample hydraulic oil P J.K.
Oil sample main winch P J.K.
Oil sample aux winch P J.K.
Oil sample luffing winch P
Oil sample engine oil P
Sample coolant P J.K.
Oil sample pump drive gearbox P J.K.
Oil sample hydro coupler pumps P J.K.Check maxer tyre wheel nut torque P J.K.
Check slew ring bolt tensions P J.K.
Oil sample slew box x 4 J.K.
Clean computer filter J.K.
Visual inspection
Key Points
Visual inspection
Page 5
Filters for 250/750 hour service Replaced
LF9080 x 2 Lube Filter
FS19763 X 1 Fuel Water Separator
AF458 x 2 Air Filter
Filters for 500 hour service Replaced
LF9080 x 2 Lube Filter
FS19763 X 1 Fuel Water Separator
AF458 x 2 Air Filter
FF5644 x 2 Fuel Filter
WF2076 x 1 Coolant Filter
Filters for 1000 hour service Replaced
LF9080 x 2 Lube Filter Yes
FS19763 X 1 Fuel Water Separator Yes
AF458 x 2 Air Filter Yes
FF5644 x 2 Fuel Filter Yes
WF2076 x 1 Coolant Filter
HF6553 x 12 Hydraulic Filters Yes
HF6587 x 2 Hydraulic Filters Yes
Kleen Oil Filters KF50 x 2 Yes
Oil sample kits x 18 Yes
Page 6
No
te. N
o
Ph
oto
R/
Tim
e
Sta
tus
1 hr Repaired
4 hr Repaired
2 hr RR
M
3 hr M
4 hr M
M
4 hr RR
M
5 hr RR
3 hr Repaired
RR
4 hr Repaired
RR
M
M
RR
RR
RR
Main winch 1st sheave seized
Minor oil leak from control valve fittings behind engine
Fill up auto greasers at 50%
Inspect/grease hooks
Top up hydraulic level
Check boom
Check sheaves
Maxxer LHS pendant ram wiper seal keeps coming out/loose
All walkway grip tape perished
All tracks require removal of excess grease - Falling on ground
Front walkway support rails very rusty
LHF track 1 main support pin (lower front) stopper welds cracked
Cab roof & around front window very rusty
Hydraulic quick coupling on top of engine bay leaking
Boom hose quick coupling front of crane leaking
Possibe rear main seal leaking - requires cleaning and investigation
Notes & Comments
Cab roof insulation falling down
Cab door slides bent - door very hard to open and shut
Cal seat back rest loose/bent
Maxxer RH outrigger gland seals minor leaks - (2 x ram reseal)
RHF maxxer outrigger valve block minor leak
Maxxer main control valve 3rd & 5th spool leaking - Requires all spools cartridges to be removed
Maxxer LH outrigger gland seals leaking
Maxxer RH wheel rotational motor leaking
Page 7
top related