laser

Post on 14-Jun-2015

167 Views

Category:

Education

4 Downloads

Preview:

Click to see full reader

DESCRIPTION

Laser and Materials Characterizations

TRANSCRIPT

laser

Laser printer

Laser pointer

Laser: everywhere in your life

What is Laser?

Light Amplification by Stimulated Emission of Radiation

• A device produces a coherent beam of optical radiation by stimulating electronic, ionic, or molecular transitions to higher energy levels

• When they return to lower energy levels by stimulated emission, they emit energy.

Properties of Laser• Monochromatic Concentrate in a narrow range of wavelengths

(one specific colour).

• Coherent All the emitted photons bear a constant phase

relationship with each other in both time and phase

• Directional A very tight beam which is very strong and

concentrated.

Basic concepts for a laser

• Absorption

• Spontaneous Emission

• Stimulated Emission

• Population inversion

Absorption

• Energy is absorbed by an atom, the electrons are excited into vacant energy shells.

Spontaneous Emission

• The atom decays from level 2 to level 1 through the emission of a photon with the energy hv. It is a completely random process.

Stimulated Emission

atoms in an upper energy level can be triggered or stimulated in phase by an incoming photon of a specific energy.

Stimulated Emission

The stimulated photons have unique properties:

– In phase with the incident photon

– Same wavelength as the incident photon

– Travel in same direction as incident photon

Population Inversion

• A state in which a substance has been energized, or excited to specific energy levels.

• More atoms or molecules are in a higher excited state.

• The process of producing a population inversion is called pumping.

• Examples:

→by lamps of appropriate intensity

→by electrical discharge

How a laser works?

1. High-voltage electricity causes the quartz flash tube to emit an intense burst of light, exciting some of Cr3+ in the ruby crystal to higher energy levels.

2. At a specific energy level, some Cr3+ emit photons. At first the photons are emitted in all directions. Photons from one Cr3+ stimulate emission of photons from other Cr3+ and the light intensity is rapidly amplified.

3. Mirrors at each end reflect the photons back and forth, continuing this process of stimulated emission and amplification.

4. The photons leave through the partially silvered mirror at one end. This is laser light.

Two-level Laser System

• Unimaginable

as absorption and stimulated processes neutralize one another.

• The material becomes transparent.

Three-level Laser System

• Initially excited to a short-lived high-energy state .

• Then quickly decay to the intermediate metastable level.

• Population inversion is created between lower ground state and a higher-energy metastable state.

23 21

1.06 m 4

2τ 2.3 10 s

1 3.39 m 2 0.6328 m

3 1.15 m

100nsτ2 10nsτ

1

Three-level Laser System

Nd:YAG laser

He-Ne laser

Four-level Laser System

• Laser transition takes place between the third and second excited states.

• Rapid depopulation of the lower laser level.

Four-level Laser System

23

m 6943.01

m 6928.02

s7

310τ s3

2103τ

Ruby laser

Laser Construction

• A pump source

• A gain medium or laser medium.

• Mirrors forming an optical resonator.

Laser Construction

Pump Source• Provides energy to the laser system

• Examples: electrical discharges, flashlamps, arc lamps and chemical reactions.

• The type of pump source used depends on the gain medium.

→A helium-neon (HeNe) laser uses an electrical discharge in the helium-neon gas mixture.

→Excimer lasers use a chemical reaction.

Gain Medium

• Major determining factor of the wavelength of operation of the laser.

• Excited by the pump source to produce a population inversion.

• Where spontaneous and stimulated emission of photons takes place.

• Example:

solid, liquid, gas and semiconductor.

Optical Resonator

• Two parallel mirrors placed around the gain medium.

• Light is reflected by the mirrors back into the medium and is amplified .

• The design and alignment of the mirrors with respect to the medium is crucial.

• Spinning mirrors, modulators, filters and absorbers may be added to produce a variety of effects on the laser output.

Laser Types

• According to the active material:

solid-state, liquid, gas, excimer or semiconductor lasers.

• According to the wavelength:

infra-red, visible, ultra-violet (UV) or x-ray lasers.

Solid-state Laser

• Example: Ruby Laser• Operation wavelength: 694.3 nm (IR)• 3 level system: absorbs green/blue

•Gain Medium: crystal of aluminum oxide (Al2O3)

with small part of atoms of aluminum is replaced

with Cr3+ ions.•Pump source: flash lamp •The ends of ruby rod serve as laser mirrors.

Liquid Laser

• Example: dye laser• Gain medium: complex organic dyes, such

as rhodamine 6G, in liquid solution or suspension.

• Pump source: other lasers or flashlamp.• Can be used for a wide range of

wavelengths as the tuning range of the laser depends on the exact dye used.

• Suitable for tunable lasers.

Schematic diagram of a dye laser

dye laser

A dye laser can be considered to be basically a four-level system. The energy absorbed by the dye creates a population inversion, moving the electrons into an excited state.

Gas Laser• Example: Helium-neon laser (He-Ne laser)• Operation wavelength: 632.8 nm • Pump source: electrical discharge• Gain medium : ratio 5:1 mixture of helium and neon

gases

μm15.1μm6328.0μm39.3 321

He-Ne laser

Applications of laser

• 1. Scientific

a. Spectroscopy b. Lunar laser ranging

c. Photochemistry d. Laser cooling

e. Nuclear fusion

• 2 Military

a. Death ray

b. Defensive applications

c. Strategic defense initiative

d. Laser sight

e. Illuminator

f. Rangefinder

g. Target designator

Applications of laser

• 3. Medical

a. eye surgery

b. cosmetic surgery

Applications of laser

• 4. Industry & Commercial

a. cutting, welding, marking

b. CD player, DVD player

c. Laser printers, laser pointers

d. Photolithography

e. Laser light display

Applications of laser

http://www.wordiq.com/definition/Laserhttp://www.asamnet.de/~birners/public_html/laser.htmlhttp://vcs.abdn.ac.uk/ENGINEERING/lasers/lasers.htmlhttp://vcs.abdn.ac.uk/ENGINEERING/lasers/lasers.html

Reference

Some links: lasers for salehttp://www.lasersurplus.com/lasers.htm

http://www.midwest-laser.com/html/ilt5490a___ilt5470k.html

http://www.hhr-lasers.com/

http://www.coherentinc.com/

http://www.spectra-physics.com/

http://www.continuumlasers.com/

How lasers workhttp://technology.niagarac.on.ca/courses/tech238g/Lasers.html

http://www.clf.rl.ac.uk/Public/index.htm

http://www.m2m.ecs.soton.ac.uk/Default.asp?id=283

top related