kawasaki robot y series - larraioz
Post on 23-Jun-2022
5 Views
Preview:
TRANSCRIPT
Y seriesKawasaki Robot
Y series
High-speed picking robot
Cat. No. 3L1741 Oct. ’17 M
Printed in Japan
Kawasaki Robot
] Materials and specifications are subject to change without notice.
CAUTIONS TO BE TAKEN TO ENSURE SAFETY
lFor those persons involved with the operation / service of your system, including Kawasaki Robot, they must strictly observe all safety regulations at all times. They should carefully read the Manuals and other related safety documents.
lProducts described in this catalogue are general industrial robots. Therefore, if a customer wishes to use the Robot for special purposes, which might endanger operators or if the Robot has any problems, please contact us. We will be pleased to help you.
lBe careful as Photographs illustrated in this catalogue are frequently taken after removing safety fences and other safety devices stipulated in the safety regulations from the Robot operation system.
ROBOT DIVISION
Tokyo Head Office/Robot Division1-14-5, Kaigan, Minato-ku, Tokyo 105-8315, JapanPhone: +81-3-3435-2501 Fax: +81-3-3437-9880
Akashi Works/Robot Division1-1, Kawasaki-cho, Akashi, Hyogo 673-8666, JapanPhone: +81-78-921-2946 Fax: +81-78-923-6548
Global Network
Kawasaki Robotics (USA), Inc.28140 Lakeview Drive, Wixom, MI 48393, U.S.A.Phone: +1-248-446-4100 Fax: +1-248-446-4200
Kawasaki Robotics (UK) Ltd.Unit 4 Easter Court, Europa Boulevard, Westbrook Warrington Cheshire, WA5 7ZB, United KingdomPhone: +44-1925-71-3000 Fax: +44-1925-71-3001
Kawasaki Robotics GmbH29 Sperberweg, 41468 Neuss, GermanyPhone: +49-2131-34260 Fax: +49-2131-3426-22
Kawasaki Robotics Korea, Ltd.43, Namdong-daero 215beon-gil, Namdong-gu, Incheon, 21633, KoreaPhone: +82-32-821-6941 Fax: +82-32-821-6947
Kawasaki Robotics (Tianjin) Co., Ltd.1·2/F, Building 6, No.19 Xinhuan Road, TEDA, China Phone: +86-22-5983-1888 Fax: +86-22-5983-1889
Kawasaki Motors Enterprise (Thailand) Co., Ltd.(Rayong Robot Center)119/10 Moo 4 T.Pluak Daeng, A.Pluak Daeng, Rayong 21140 Thailand Phone: +66-38-955-040-58 Fax: +66-38-955-145
https://robotics.kawasaki.com/ ISO certified in Akashi Works.
YF003NYF002N
1 2
FeaturesHigh-processing capabilityThe YF003N boasts speeds of 222 cycles per minute for a 1-kg payload operation, in a to-and-fro motion, with an upward stroke of 25 mm, a horizontal stroke of 305 mm, and then a downward stroke of 25 mm. Meanwhile the YF002N offers speeds of 200 cycles per minute for a 0.5-kg payload operation, in a to-and-fro motion, with an upward stroke of 25 mm, a horizontal stroke of 305 mm, and then a downward stroke of 25 mm. The high-processing ability contributes to takt time reduction.
Large motion rangeThe expanded line of products, including the YF002N, with a motion range of 600 mm in diameter and 200 mm in vertical direction, and the YF003N, with a motion range of 1,300 mm in diameter and 500 mm in vertical direction, covers various types of workpieces and production lines.
High accuracyHigh repeatability ensures accurate pick & place operation and high productivity.
High-density layoutThe YF002N, with its more compact structure and smaller footprint, enables the high-density layout of multiple robots. The lighter body can also be installed on a cantilever mount.
Readily compatible with the Vision systemThe series can offer high-speed, high-precision, and safe transfer in combination with a visual sensing system. The YF002N’s top mounting base is provided with a hollow space at the center for installing a camera.
Wash-downs with acid or alkaline cleanser (For the YF003N)The arm is designed for wash-downs with acid or alkaline cleanser, thus assuring hygiene in production plants.
Use of food-safe grease and oil for food-processing machineryGrease and oil for food-processing machinery is used for moving parts to assure hygiene in case of unforeseeable accidents.
Easy maintenanceThe simple, center-drive shaftless design results in easy maintenance.The YF002N is designed so that the main parts can be exchanged in units, greatly facilitating the task of exchanging parts.
For speed up production lines –
The “Y series” high-speed pick & place robots are ideal for a wide range of applications, including food, pharmaceutical, and cosmetics production lines, as well as the assembly and placement of electrical, electronic, and machine parts. The “Y series” includes two models: the YF003N, with a 3-kg payload capacity, and the YF002N with a 2-kg payload capacity. They are capable of high-speed motion over a wide range, which helps speed up production lines.
Specication Motion Range & Dimensions
(mm)
JT1
JT2
JT3
Y
36
257
R270 6-ø11
3-ø10G7
R401
15
°
ø0.04
VIEW A
ø25 AIR PORT Rc1/8
ø34.5h7 0-0.025
7
4-M4 Dp8
ø4H7 Dp5+0.012 0
Working rangebased on point P
A
ø500
Point P
ø600
28
.3
42
5
20
0
17
0
22
15
0
59
5
+0.020+0.005
JT4 : ±360°
YF002N
P
0-0.025
7
4-M4 Dp8+0.012 0 Dp5
80
15
5.5
ø0.06
A
JT1
JT2
JT3
JT4 : ±360°
30
02
00
ø1,300
ø900
120°
120°
415
6-ø18
35
3-ø16G8 +0.033+0.006
ø880
68
5
1,0
20
33
5
ø34.5h7
ø4H7
ø0.04
ø25
VIEW A
Working rangebased on point P
(mm)
YF003N
YF002N YF003N
Type Parallel link type
Max. payload (kg) 2 3
Degree of freedom (axes) 4
Motion range (mm) ø 600 x H200 ø 1,300 x H500
Cycle time (Payload) ]1 0.3 s (0.5 kg) 0.36 s (2 kg) 0.27 s (1 kg) 0.45 s (3 kg)
Positional repeatability (mm) ]2 ±0.04 ±0.1
Angular repeatability (°) ±0.1
Mass (kg) 60 145
Body color Munsell 10GY9/1 equivalent
Installation Ceiling
Environmental condition
Ambient Temperature (°C) 10 - 40 0 - 45
Relative Humidity (%) 35 – 85 (No dew, nor frost allowed)
Power requirements (kVA) ]3 3.0 4.0
Degree of protection
Standard IP65
Option — IP67
Controller
America E97
Europe E91
Japan & Asia E94
]1: Motion pattern (25mm up, 305mm horizontal, 25mm down in a to-and-fro motion) ]2: conforms to ISO9283 ]3: depends on the payload and motion patterns
3 4
YF002N
800760
440 130 1,660
2,355
(1,4
80
)
1,5
80
18
0
180
40
5
20
08
1
12
0
21
40
0
90
0
360x400
78
0
Camera
Conveyor 1
Conveyor 2
Cutter
Tray feeder
Packer
Vision view
System application examples Robot end effector types
5 6
Comprehensive robotic solutions for picking, packing, and palletizing, allowing for the automation and streamlining of various processes that enable efficiencies
A wide range of variationsRobot end effectors are available in a wide range of variations to suit your needs.
Automation of simple tasksHigh-speed picking, placing, and packing of sweets, retort foods, frozen foods, and other foods on packing lines
High-speed placement and color identification of cosmetics and medical product containers on filling lines
Placing of packaged instant food and retort-food trays on sterilized lines
Sorting and placing of products based on camera inspection resultsAfter inspecting the products transferred by the conveyor, such as wafers for solar cells, by an inspection camera, sort and place the products using picKstar.
Products judged as defective by inspection are ejected onto a reject table.
Y-series robots combined with the Vision system can accommodate a variety of product types, with no need to extensively modify the robot hardware.
(mm)
Layout example
Wafer gripper
Chuck jaw gripper for handling boxes
Double gripper for handling packages
Double gripper for handling sweets
Bernoulli gripper for handling wafers
Three-finger gripper for handling tubular workpieces
Recognition soft Distribution soft
Processed within a Vision PC
• Fast recognition and high accuracy recognition
• Recognition of various object(shapes and colors)
• Inspection, discrimination of both sides
• Easy operation
• Work position is distributed to the multiple robot (max. 8) based on the result of the vision.
• Ability to distribute connection data via UDP/IP or TCP/IP when combined with off-the-shelf Vision application software
Properly distributes position and angle information to each robot
Send work position and angle information
Vision PCEthernet
Parallel I/ODeviceNet PROFIBUS INTERBUSEtherNet/IP CC-Link Modbus/TCP CANopen
Valve (or a valve built into a robot)
2D vision camera for workpiece recognition
Shutter signal distribution
Noti�cation of image capture completion (sent from the camera to the robots)
Conveyors (able to synchronize up to four conveyors)
Conveyor encoders (able to transfer up to 16 robots)
Line control PLC
Commands for capturing image data (sent from the K-VFinder to the camera)Image data capture (sent from the camera to the K-VFinder)
Commands for determining the workpiece position (sent from the robots to K-VAssist)Workpiece position data distribution (from K-VAssist to the robots)
— : Robot harness
— : Encoder harness
— : LAN cable
— : Dedicated I/O cable
— : I/O cable
Simulation Tool Kawasaki vision system
7 8
K-ROSET lets you use your computer to program robots and perform simulations. High performance vision system, applied to various usages flexibly and immediately
Kawasaki vision soft
System configuration exampleFeaturesIt allows users to create models of multiple robot systems through the interactive input of parameters.The models help to verify the workload-sharing patterns between robots.(The verification using many robots needs the K-VAssist. Please contact our sales office for details.)
K-ROSET can reproduce practically the same operation trajectories as an actual robot.It can even simulate variations between supplied workpieces, enabling highly accurate cycle-time verification.
The camera’s field of vision can be checked by the virtual camera of K-ROSET.
Robot programs verified in simulations are compatible with real robot operations, with few modifications.(Making additional adjustments to the teaching points are required during installation.)
OS environment: Windows 7/10 (x86, x64])]On a 64-bit computer, it runs in the 32-bit compatible mode.
Controller
(mm)
REPEATTEACH
BRAK
ERE
LEAS
E
500
58
01
82
50
E
YEMRENCG
S POT
POWERCONTROL
Bright, colour LCD touch screen display.
The arrangement of keys has been optimised through extensive studies of operator hand movements.
Light weight and balanced body.
Specifications
External view & dimensions
E seriesKawasaki has incorporated more than 45 years of experience as a robot industry leader into the development of the most technically advanced controller available. The E Controller combines high performance, unprecedented reliability, a host of integrated features and simple operation, all in a compact design.
FeaturesCompactThe overall volume of the E Controller has been reduced compared with the previous model. The small footprint of this compact controller allows for installation in “high-density” applications. For further space saving options, an upright-position or stacked installation is possible, without impeding performance.
User-friendly operationThe easy-to-use teach pendant now incorporates motor power and cycle start at your fingertips. Multiple information screens can be displayed simultaneously. The intuitive teaching interface is simple to use.
Programming ease & flexibilityA rich set of programming functions come standard with the E Controller to support a wide range of applications. Functions can be combined and easily configured within a system to suit a particular application. Also, the powerful Kawasaki AS Programming Language provides sophisticated robot motion and sequence controls.
Advanced technologiesThe enhanced CPU capacity allows for more accurate trajectory control, faster program execution, and quicker loading and saving of files. In addition, memory has been expanded to meet the need for higher program storage capacity. The controller comes equipped with a USB port for external storage devices.
Easy maintenanceModular components with limited cables translate into easy diagnostics and maintenance. A host of maintenance functions are available, including self-diagnostics on hardware and application errors to minimize troubleshooting and reduce MTTR (Mean Time To Repair). Remote diagnostics via the web server function enables service support from anywhere in the world.
ExpandableNumerous communication fieldbuses are available for controlling peripheral devices. The Kawasaki K-Logic sequencer software can be combined with user customized interface panels on the teach pendant.
Standard
OptionAmerica E97
Europe E91
Japan & Asia E94
Dimensions (mm) W550×D580×H268
Structure
E97 Open structure with direct cooling system Enclosed structure
E91 Enclosed structure / Indirect cooling system
E94 Open structure with direct cooling system Enclosed structure
Memory capacity (MB) 8
Generalpurposesignals
External operation Motor power off, Hold
Input (Channels) 32 Max. 96
Output (Channels) 32 Max. 96
Operation panelE-Stop switch, teach/repeat switch, control power light
(Cycle start, motor-on, hold/run, and error reset are activated from the teach pendant.)
Mass (kg) 40
Power requirements
AC200-230V ±10%l 50/60Hzl 1ø
Class-D earth connection (Earth connection dedicated to robots), leakage current: Maximum 100mA
Environmentalcondition
Ambient temperature (°C)
E97 0 – 45 0 – 40 (Enclosed structure)
E91 0 – 40
E94 0 – 45 0 – 40 (Enclosed structure)
Relative humidity (%) 35 - 85 (no dew, nor frost allowed)
Body color Munsell 10GY9/1 equivalent
Teach pendantTFT color LCD display with touch-panel, E-Stop switch,
teach lock switch, Enable switch
Interface USB, Ethernet (100BASE-TX), RS-232C
Teach pendant
9 10
Instalaciones en Getaria
Larraioz Etxea, Eizaga Auzoa, Garate Mendi E-20808
GETARIA (Gipuzkoa), Spain
Instalaciones América Latina
Carlos Calvo 2480, B8000XAVBuenos Aires (Buenos Aires),
Argentina
Dirección postal
Larraioz Electrónica Industrial, S.L. Apartado de Correos 193 E-20800 ZARAUTZ
(Gipuzkoa), Spain
Instalaciones centrales
Francisco Aristeguieta Centro Tecnológico (F.A.C.T.)GI-3162 (Zarautz – Urdaneta) km 2,2
E-20809 AIA (Gipuzkoa), Spain
Tel. (+34) 943 140 139Fax. (+34) 943 140 327
E-mail. info@larraioz.com
www.larraioz.com
SERVICIO TÉCNICO, CONSULTORÍA, TRAINING Y CANAL DE VENTA OFICIAL
Industry 4.0 VisionIndustrial AutomationMechatronics & Robotics
top related