kargo - metal mecanica · kargo 10 kargo 30 kargo 60 siemens / fanuc siemens / fanuc siemens /...
Post on 22-May-2020
13 Views
Preview:
TRANSCRIPT
KARGOCYLINDRICAL GRINDING
HEAVY SHAFTSEASILY GROUND
Up to six tons and several yards long – grinding shafts of this size is
a challenge that is tirelessly mastered by the grinding machines of
the Kargo series. A powerful clamping device, hydrostatic guides and
hydrostatically mounted grinding spindles guarantee the greatest
possible precision.
• Precise grinding with corundum• Designed for heavy and long workpieces• Rugged machine bed with full-protection hood• CNC control system with user-friendly interface• Post-process measurement• Recording of error messages• Display of the maintenance intervals• Compliance with all safety regulations
ADVANTAGES
APPLICATION EXAMPLES
USE
ZEMA • KARGO2 KARGO • ZEMA 3
F F
F
F
A
B
F
F
F
F
F
FA
B
EQUIPMENT
• Insensitive to vibrations and low maintenance thanks to spindle mounted on hydrostatic bearings• Peripheral speed 45 m/s• Different wheelhead versions for straight plunge cut or inclined plunge cuts• Automatic compensation of grinding wheel diameter after dressing• Automatic balancing device (optional)
• Dead center• Live center (optional)• Speed programmable in a range up to 150 rpm• Offset protection through additional locking of workhead• Maximum permissible workpiece weight: 1000 to 6000 kg
• With either dead or live center• Automatic monitoring of tailstock pressure• Electromechanical actuation• Manual taper adjustment• Offset protection through additional locking of tailstock
WHEELHEAD
WORKHEAD
TAILSTOCK
MACHINE BED
• Use in the X and Z-axis, designed as compound slide rests• Uniform, jolt-free movement (no stick-slip effect)• Drive via servomotors with absolute encoders• High-precision positioning for precise grinding results
HYDROSTATIC GUIDE
A – Moving slide / B – Fixed guide / F – Force applied
A – Housing / B – Shaft / F – Force applied
• With gray cast iron design• High torsional rigidity and good damping behavior• Proven quality
HYDROSTATIC BEARINGS• Use in radial and axial bearings of wheelheads and workheads• Perfect rotational movement and constant centering of shaft• Vibration-damping
CONTROL SYSTEM• Choose from Fanuc or Siemens• KARGO software developed especially for the requirements of external cylindrical grinding• Easy programming, installation and operation of the machine thanks to standard ISO programming• Ergonomic machine setup through the machine control in a pivotable and movable control panel
DRESSING UNIT• Single-grain diamond or dressing fleece (standard)• Rotating dressing (optional): - Diamond profile grinding wheel or - Diamond shape roller
MEASURING
POSITIONING
• Measurement systems are adapted to the workpieces and customer specifications• In-process measurement device for measuring smooth or interrupted external diameters• Large diameter measuring range possible
• Automatic recording of reference surfaces on the clamped workpiece through bidirectional positioner• Recorded values are automatically integrated into the grinding process• Retractable integration on the wheelhead• Touch-trigger probe for precise workpiece detection
• Electronic longitudinal positioning• Steadies• Structure-borne sound sensor• Grinding spindle with dynamic balancing system• Post-process measuring system• Exhaust-air purification systems from LTA• Coolant systems
OPTIONS
ZEMA • KARGO4 KARGO • ZEMA 5
OD1 F/G/H
2.000/ 2.500/ 3.000/ 3.500/ (4.000) mm
Larg. = 5.150/ 5.650/ 6.150/ 6.650/ (7.150) mm Comp. = 4.038 Alt. = 2.357 mm
15.000/ 17.000/ 19.000/ 21.000/ (23.000) kg 17.000/ 20.000/ 23.000/ 26.000/ (29.000) kg 25.000/ 28.000/ 30.000/ 33.000/ (36.000) kg
2.100/ 2.600/ 3.100/ 3.600/ (4.100) mm
360 mm 360 (430) mm 430 (510) mm
1.000 kg 3.000 kg 6.000 kg
1.500 kg 4.000 kg 8.000 kg
700 mm 700 (850) mm 850 (1.000) mm
760 (915) (1067) x 304,8 mm
18 (22) kW 22 (30) kW 30 kW
Morse6/ ANSI 1:4 ANSI 1:4 ANSI 1:4
± 2 mm ± 2 mm ± 2 mm
57 (61) kW 70 (85) kW 85 (95) kW
100 (150) mm 100 (150) mm 100 (150) mm
150 U/min 110 U/min 90 U/min
ANSI 1:4 ANSI 1:4 ANSI 1:4
60 mm 150 mm 150 mm
KARGO 10 KARGO 30 KARGO 60
Siemens / Fanuc Siemens / Fanuc Siemens / Fanuc
OD1F/G/H
F0°
G20°
H30°
x
z
x
z
x
z
PLATFORM
TECHNICAL DATA
CNC CONTROL SYSTEM
AVAILABLE WHEELHEAD VERSIONS
GRINDING LENGTH
W X D X H (WITHOUT PERIPHERALS)
TOTAL WEIGHT OF MACHINE
CLAMPING LENGTH
CENTER HEIGHT
WORKPIECE WEIGHT
MAXIMUM CLAMPING WEIGHT STEADY SUP-PORTED
GRINDING WHEEL DIAMETER
OUTPUT OF GRINDING WHEEL MOTOR
PERIPHERAL DIAMETER
TAILSTOCK SLEEVE: CORRECTION OF TAPER
INSTALLED TOTAL OUTPUT
TAILSTOCK SLEEVE: INTERNAL MORSE TAPER
GRINDING WHEEL WIDTH
WORKPIECE SPINDLE: PROGRAMMABLE SPEED
WORKPIECE SPINDLE: INTERNAL MORSE TAPER
TAILSTOCK SLEEVE: STROKE LENGTH
WHEELHEAD VERSIONS
Grinding spindle hydrostatically mounted
AXIS ARRANGEMENT
ZEMA • KARGO6 KARGO • ZEMA 7
www.zema.com.br
ZEMA Zselics Ltda.
Estrada do Capivari 741
Cep 09835-450
S.B. do Campo, São Paulo
Brazil
zema@zema.com.br
+55 11 4397 6000
www.zema.com.br
EUROPE
ASIA
Erwin Junker
de Mexico, S. de R.L. de C.V.
Blvd. Bernardo Quintana #7001
Torre 2, #1203
Centro Sur Querétaro
Qro., C.P. 76079
Mexico
info@junker.com.mx
+52 442 199 5111
www.junker.com.mx
Erwin Junker
Máquinas Ltda.
Estrada do Capivari 741
Cep 09835-450
S.B. do Campo, São Paulo
Brazil
info@junker-group.com.br
+55 11 4153 9645
www.junker-group.com.br
Erwin Junker
Maschinenfabrik GmbH
Shanghai Representative Office
Unit 1003, Floor 10
Tower II Kerry Ever Bright City
Enterprise Center
No. 209 Gonghe Road
Shanghai 200070
P.R. China
info@junker.com.cn
+86 21 6143 8528
www.junker.com.cn
Erwin Junker
Maschinenfabrik GmbH
India Branch Office
Office No. 104, City Square
29-2, K.M. Gandhi Path
Bhamburda, Shivaji Nagar
Pune 411 005
India
info@junker.in
+91 20 255 33 896
www.junker.in
Erwin Junker
Machinery, Inc.
2541 Technology Drive, #410
Elgin, IL 60124
USA
info@junker-usa.com
+1 847 488 0406
www.junker-usa.com
AMERICA
LTA Industrial Air Cleaning
Systems, Inc.
2541 Technology Drive, #410
Elgin, IL 60124
USA
info@lta-usa.com
+1 847 488 0406
www.lta-filter.com
Erwin Junker
Grinding Technology a.s.
Plant Holice
Pardubická 332
534 13 Holice
Czech Republic
info@junker.cz
+420 466 003 111
www.junker.cz
Erwin Junker
Grinding Technology a.s.
Russia Branch Office
Prospekt Tolbukhina 17/65
150000 Yaroslavl
Russian Federation
info@junker-russia.ru
+7 (4852) 20 61 21
www.junker-russia.ru
Erwin Junker
Makina Sanayi Ticaret LTD. ŞTİ.
Esentepe Mah.
Milangaz Cad. No:75
Monumento
Kartal/Istanbul
Turkey
info@junker-turkey.com.tr
+90 216 504 28 11
www.junker-turkey.com.tr
LTA Lufttechnik GmbH
Junkerstraße 2
77787 Nordrach
Germany
info@lta.de
+49 (0)7838 84 245
www.lta-filter.com
LTA Industrial Air Cleaning
Systems s.r.o.
Lidická 66
252 68 Středokluky
Czech Republic
info@lta.de
+420 233 012 113
www.lta-filter.com
Erwin Junker
Maschinenfabrik GmbH
Junkerstraße 2
77787 Nordrach
Germany
info@junker.de
+49 (0)7838 84 0
www.junker.de
EN 08/2017 – We reserve the right to make changes in the interests of technical progress. All information supplied without guarantee.
top related