juno international catalogue
Post on 29-Mar-2016
281 Views
Preview:
DESCRIPTION
TRANSCRIPT
InternationalCatalogue
Paints, enamels and varnishesfor decorative, professionaland industrial sectors
Colour, use and legal disclaimer:
Printed colours in this catalogue may vary as printing inks do not perform like dying inks. Showed colours are approximations and therefore not valid for decision making. For accurate colour samples, ask the marketing department for real applications or colour cards.
This catalogue shows JUNO standard range. Product range, specifications, naming and code system may vary according to the markets. Contact the commercial department for further information and product possibilities.
All art work is property of JUNO company and cannot be used or reproduced. Any unauthorized art work reproduction is protected by law. Any concerns as to the legality of reproduction should be directed to JUNO (infoweb@juno.es).
Index
Corporate profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Paint systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1. Professional sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.1. Paints and treatments for facades . . . . . . . . . . . . . . . . . 9
1.2. Outdoor paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.3. Indoor decorative paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.4. Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.5. Junomatic tintometric system . . . . . . . . . . . . . . . . . . . . . . . . 20
1.6. Wood treatment and decoration . . . . . . . . . . . . . . . . . . . . 20
1.7. Plasters and fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1.8. Solvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2. Industrial sector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.1. Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.2. Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.3. Special industrial paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Juno International Catalogue | 3
Quality since 1927
JUNO company was established in 1927, in Spain. It was founded by Mr. Julio Cano in Bilbao downtown, main city of the Basque Country, and the company remains faithful to their family origins.
Main activity was the production of decorative and protective varnishes and paints, although along the years the production lines and business divisions have enlarged to industrial paints, paint machinery, tooling, refurnishing and decoration.
Nowadays, JUNO has three factories located in Spain and over 75 own distribution points, satisfying all domestic and professional needs and leading the demanding facades paint sector as well as ecologic paints and enamels.
Outgoing investments in R&D and production improvements together with right partnerships with premium quality raw material producers guarantee the steady quality of our products, some of them over 50 years experienced.
From 2007 onwards, international activities have placed the JUNO brand worldwide.
JUNO SUSTAINABILITY PROGRAMME
JUNO corporate management strategy is based on a principle of harmonising economic success and social prosperity with environmental values.
Our factories work with ISO 9001 Production and ISO 14001 Environment Systems to provide assurance to management, partners and customers that they are in control of the organisational processes and activities having an impact on the environment and to assure employees that they are working for an environmentally responsible organisation.
Flameproof
B-s1,d0
EMBLEMATIC STRUCTELECTRICAL PYLONSSTORAGE CONTAINERS
HOTELSFENCESSHIP DECKS
INDOOR WOODSPORT FACILITIESSWIMMING POOLS
DECORATIVE FACADPARKINGSART INSTITUTIONS
Work done, satisfaction guaranteed.Amateur painters and people fond of
do-it-yourself get surprised when a
professional is working, as the activity
seems to perform smooth, easy and
according to plan. It is not only due
to their experience, gained over years
and years, and professional skills. The
right selection of the products, proper
preparation of the supports and suitable
application under manufacturer’ advices
surprise during the process, and deeply
indeed once the work is complete.
Professional paint not only means
intensive application or difficult work
conditions, it is more related to the
prescription of integral paint systems.
TURES INDUSTRIAL STRUCTURES
ENERGY PIPES
OUTDOOR WOOD
DES FACADE TREATMENTS
6 | Juno International Catalogue
Raw substrate » Indoor
Preparation: If the substrate iss not properly prepared, use Akril
80. Otherwise, use Junolite or Hidrokril to improve adherence.
Finish: Use the Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.
Raw substrate » Outdoor
Preparation: If the substrate iss not properly prepared, use Akril
80. Otherwise, use Junolite or Hidrokril to improve adherence. Use Invisible primer if the support requires anti-damp properties.
Finish: Use the high quality Junokril paint. Apply two coats; first one for protective effect and second one for decorative purposes.
Worn substrate » Indoor
Preparation: Not required, unless the support has defects, cracks or damp stains.
Finish: Use Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.
Worn substrate » Outdoor
Preparation: Not required, unless the support has defects, cracks or damp stains. Use Invisible primer if the support requires anti-damp properties.
Finish: Use Junokril. If customised colour is required, use Bikril bases. Apply two coats; first one for protective effect and second one for decorative purposes.
Raw substrate » Indoor
Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite or Hidrokril to improve adherence.
Finish: Use Junokril. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.
Raw substrate » Outdoor
Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite to improve adherence.
Finish: Use Junokril. If customised colour is required, use Bikril bases. Apply two coats; first one for protective effect and second one for decorative purposes.
Worn substrate » Indoor
Preparation: Not required, unless the support has defects, cracks or damp stains.
Finish: Use Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.
Worn substrate » Outdoor
Preparation: Not required unless the support has defects, cracks or damp stains. Use Invisible primer if the support requires anti-damp properties.
Finish: Use Junokril. Use Juno-Rev coating in case the surface is not under intense weather conditions. If customised colour is required, use Bikril or Luna bases for the tintometric system. Apply two coats; first to protect and second for decorative purposes.
Raw substrate » Indoor
Preparation: If the support is not properly prepared, correct the defects with Plaste Juno and apply Hidrocril to improve adherence and penetration. Use Aquasell to cover joints and balance support absorption.
Finish: Use Junokril. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.
Raw substrate » Outdoor
These supports are not appropriate for outdoor.
Worn substrate » Indoor
Preparation: Not required, unless the support has defects, cracks or damp stains.
Finish: Use Junoral range. If customised colour is required, use Junoprof bases. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.
Worn substrate » Outdoor
These supports are not appropriate for outdoor.
Raw substrate » Indoor
Preparation: Once the substrate is clean, use Multisupport primer or Metalex. Use Waterprim for immediate room use.
Finish: Use Junolac. If customised colour is required, use Junomalte bases. Use Aqualac for immediate room use.
Raw substrate » Outdoor
Preparation: Once the substrate is clean, use Multisupport primer or Metalex.
Finish: Use Junolac. If customised colour is required, use Junomalte bases. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first to protect and second for decorative purposes.
Worn substrate » Indoor
Preparation: Not required, unless the support has defects, cracks or damp stains.
Finish: Use Junoplus. Use Aqualac for immediate room use. Apply two coats; first one for protective effect and second one for decorative purposes.
Worn substrate » Outdoor
Preparation: Not required, unless the support has defects, cracks or damp stains.
Finish: Use Junolac. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first one for protective effect and second one for decorative purposes.
BRICKS
CONCRETE
PLASTER
METAL
Paint systemsPaint systems, either decorative or industrial, in new or worn substrates, require the right selection of the products, optimal application conditions and support preparation. Occasionally, when work is not satisfactory, it’s usual to accuse the paint, latest process and therefore the most exposed to blame. Nonetheless, previous steps related to advise, preparation and application guarantee the success.
Juno International Catalogue | 7
Raw substrate » Indoor
Preparation: The substrate should be clean, without oils, oxide or previous paints. It’s recommended to use Multisupport primer for effective Antirust protection.
Finish: Use Junolac. If customised colour is required, use Junomalte as base for the tintometric system.
Raw substrate » Outdoor
Preparation: The substrate should be clean, without oils, oxide or previous paints. It’s recommended to use Multisupport primer for effective Antirust protection.
Finish: Use Junolac. If customised colour is required, use Junomalte bases for the tintometric system. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first to protect and second for decorative purposes.
Worn substrate » Indoor
Preparation: Not required, unless the support has defects, cracks or damp stains.
Finish: Use Junolac. If customised colour is required, use Junomalte as base for the tintometric system. Apply two coats; first one for protective effect and second one for decorative purposes.
Worn substrate » Outdoor
Preparation: Not required, unless the support has defects, cracks or damp stains.
Finish: Use Aqualac for immediate room use and when a customised colour is required.
Raw substrate » Indoor
Preparation: Use waterbased Bondex treatment as protective barrier against insects.
Finish: Use Aquadur glossy finish for water resistance and hardness. Use Lasur to facilitate later treatments. Use Aqualac if a coloured finish is required.
Raw substrate » Outdoor
Preparation: Use waterbased Bondex treatment as protective barrier.
Finish: Apply two coats of Junotinte to improve the wood resistance and hardness. To maintain the original wood beauty, use Junolac glossy varnish. Use Lasur to facilitate later treatments. Use Yacht or Teka oil if the wood is exposed to severe weather conditions.
Worn substrate » Indoor
Preparation: Gently sand the wood to remove previous treatments and apply Bondex
classic.
Finish: Use Aquadur glossy for water resistance and hardness. Apply two coats of Junotinte to improve the wood resistance.
Worn substrate » Outdoor
Preparation: Gently sand the wood to remove previous treatments and apply Bondex
classic. If the former treatment is Lasur, it’s ready for the finish coat.
Finish: Apply two coats of Junotinte. To maintain the original wood colour and beauty, use Junolac glossy varnish. Use Junolac bright enamel for a coloured finish.
Raw substrate » Indoor
Preparation: Gently sand the wood to remove previous treatments and apply Aqueous
floor wood protector.
Finish: Apply glossy Aqueous
floor or Junodur varnish, in case the immediate use is not required.
Raw substrate » Outdoor
Preparation: Gently sand the wood to remove previous treatments and apply Aqueous
floor wood protector.
Finish: Apply Yacht Spar varnish due to the great resistance to outdoor weather conditions or Lasur aqueous to improve wood permeability.
Worn substrate » Indoor
Preparation: Gently sand the wood to remove previous treatments and apply Aqueous
floor wood protector. If the former treatment is Lasur, it’s ready for the finish coat.
Finish: Apply Aqueous floor or Junodur varnish, in case the immediate use is not required.
Worn substrate » Outdoor
Preparation: Gently sand the wood to remove previous treatments and apply Aqueous
floor wood protector. If the former treatment is Lasur
varnish, it’s ready for the finish coat.
Finish: Apply Yacht spar varnish due to the high resistance to outdoor weather conditions or Lasur aqueous to improve wood permeability.
Raw substrate » Indoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use chloro-rubber Dynamol. If not exposed to intense use, it’s possible to use Junosol or Junosport. Use 2 components epoxy Pavimic
floor.
Raw substrate » Outdoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use chloro-rubber Dynamol. If not exposed to intense use, it’s possible to use Junosol or Junosport. Use 2 components epoxy Pavimic
floor.
Worn substrate » Indoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use chloro-rubber Dynamol. If not exposed to intense use, it’s possible to use Junosol or Junosport. Use 2 components epoxy Pavimic
floor.
Worn substrate » Outdoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use chloro-rubber Dynamol. If not exposed to intense use, it’s possible to use Junosol or Junosport. Use 2 components epoxy Pavimic
floor.
Raw substrate » Indoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use Junosol or Junosport. For improved resistance, use waterbased 2 components epoxy Dynapok (2/C).
Raw substrate » Outdoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use waterbased 2 components epoxy Dynapok (2/C). It’s possible to use Junosol or Junosport if not under intense use.
Worn substrate » Indoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use waterbased Junosport. For improved resistance, use waterbased 2 components epoxy Dynapok
(2/C).
Worn substrate » Outdoor
Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.
Finish: Use waterbased 2 components epoxy Dynapok (2/C). It’s possible to use Junosol or Junosport if not under intense use.
ALUMINUIM & GALVANISHED
WOOD
WOODEN FLOOR
CONCRETE FLOOR
ASPHALT FLOOR
1. Professional sectorPaint means immediate satisfaction. Paint is the first choice to give a room an instant makeover. It not only changes the looking but it’s able to draw attention, hide walls that are in poor condition or create the feeling of a light, airy, or bigger room. Colour possibilities, rich colour depth and effects are uncountable, but possibilities enlarge indeed if taking into account the varied applications, ranges from glossy to matt finish or textured. Up-to-date paints, enamels and varnishes become active, adding waterproof, fungicide, bactericide or mildew resistant properties.
Juno International Catalogue | 9Colours are approximations and may vary once applied.!
1.1. Paints and treatments for facades
1.1.1. Smooth waterbased paints
NOVOKRILSatin or matt
A-100 STIMAXMatt
BIKRILSatin or matt
JUNOKRILSatin
Matt
Waterbased premium paint with mildew resistant
properties.
Based on high flexibility and adherence pure acrylic copolymers and UV filters that create a water resistant film, while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.
Waterbased paint.
Based on acrylic resins.Indoor or outdoor.Water dilution and cleanliness.
Waterbased paint.
Based on acrovinyl resins and UV filters that create a water resistant film, while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.
Waterbased premium paint with mildew resistant
properties.
Based on high flexibility and adherence acrylic-vinyl copolymers and UV filters that create a water resistant film, while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.
Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).
Recommended for facades, walls, bathrooms and rooms that may require a water resistant and permeable quality matt finishing.
Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).
Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).
15 l 4 l
15 l 4 l 750 ml
15 l 4 l 750 ml
15 l 4 l 750 ml
White / Satin (62.150) White / Matt (62.195)
White / Matt (62.400)
White (60.100)
White base / P (60.300)
Medium base / D (60.301)
Transparent base / TR (60.302) Colours under request
15 l 10 l 4 l 750 ml
15 l 4 l 750 ml
White base / P (61.000)
Medium base / D (61.195)
Transparent base / TR (61.196)
Black (61.001)
Slate (61.002)
Earth (61.004)
Sky blue (61.009)
Sahara (61.018)
Mars (61.028)
Wheat (61.029)
Cement (61.038)
Ochre (61.065)
Turkish red (61.070)
Tile (61.079)
Orange (61.020)
Jai-Alai green (61.052)
New blue (61.012)
Red (61.016)
Yellow (61.025)
Colours under request
White base / P (60.500)
Medium base / D (60.501)
Transparent base / TR (60.502)
Yellow base (88.895)
Red base (88.896)
Colours under request
Satin finishing
Satin finishing
Matt finishing
Matt finishing
GEOCISA
GEOCISAFlameproof
B-s1,d0
Suitable for JUNOMATIC
Suitable for JUNOMATIC
!
Colours are approximations and may vary once applied.!10 | Juno International Catalogue 2012
A-5000Matt
MEDITERRANEAN FACADES
Matt
Great coverage waterbased paint.
Based on acrylic resins.Indoor or outdoor.Water dilution and cleanliness.
Rough waterbased paint.
Based on acrylic copolymers.Indoor or outdoor.Water dilution and cleanliness.
Recommended for facades, walls, bathrooms and rooms that may require a quick drying matt finishing, facilitating the later coats.
Recommended for walls and rooms that may require a rough matt finishing and for outdoor facades not directly exposed to severe weather conditions.
15 l 4 l
15 l 4 l
White / Matt (62.590)
White / Matt (73.312)
1.1.2. Elastic waterbased paints
ELASTIC ROOFS
JUNO ELASTIC
ANTILEAK JUNOTERAS
Waterbased elastic paint.
Based on acrylic resins with excellent mechanic and water protective properties and broad range of permanent elasticity (–20 °C to 60 °C).Outdoor use.Water dilution and cleanliness.
Waterbased waterproofing elastic paint.
Based on elastomeric acrylic resins.Outdoor use.Water dilution and cleanliness.
Waterbased waterproofing elastic paint.
Based on elastomeric acrylic resins.Outdoor use.Water dilution and cleanliness.
Recommended for the waterproofing and rough decoration of facades, ground floors and roofs with cracks or fissures.
Recommended for the horizontal (over 1% slope gradient) and vertical waterproofing on facades, balconies and roofs without fissures over 0.6 mm that may have damp problems not being exposed to intense use.
Recommended for the horizontal (over 1% slope gradient) and vertical waterproofing on facades, balconies and roofs without fissures over 0.6 mm that may have damp problems not being exposed to intense use.
15 l 4 l
15 l
15 l 4 l
White (62.601) Red (62.602)
Terracotta / Semi-matt (62.870)
White (62.641)
Red (62.642)
Green (62.643) Grey (62.644)
1.1.3. Stone coatings
LUNA COAT Stone coating.
Smooth finishing.Based on styrene resins with excellent flexibility and waterproofing properties.Indoor or outdoor.Water dilution and cleanliness.
Recommended to hide defects on the support giving a decorative and protective finishing.
15 l
White base / P (67.500) Colours under request Suitable for JUNOMATIC
!
!
!
Juno International Catalogue | 11Colours are approximations and may vary once applied.!
SUPER JUNO-REV
Stone coating with mildew and carbonate resistant
properties.
Smooth finishing.Based on high quality acrylic resins with excellent flexibility and waterproofing properties while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.
Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).
15 l 4l
White / smooth (65.101)
Turkish red (65.121)
Tile (65.132)
Volcano (65.103)
Brick (65.106)
Terracotta (65.102)
Clear salmon (65.153)
Arab brown (65.111)
Cinnamon (65.134)
Hazelnut (65.115)
Sand (65.117)
Cream (65.118)
Dune (65.116)
Clay (65.105)
Straw (65.195)
Mustard (65.107)
Desert (65.175)
Ivory (65.154)
Pastel (65.135)
Gold (65.177)
Bull-ring sand (65.112)
Vanilla (65.196)
Landscape (65.194)
Wafer (65.184)
Clear bone (65.119)
Wheat (65.110)
Jai-alai green (65.130)
Olive green (65.108)
Clear green (65.113)
Throne blue (65.143)
Montgo blue (65.104)
Colours under request
JUNO-REV Stone coating.
Smooth or rough finishing.Based on a acrylic resins with excellent flexibility and waterproofing properties while preserving the permeability.Indoor or outdoor.Water dilution and cleanliness.
Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).
15 l
15 l 4l
White (64.500)
White (65.500)
Grey (65.502)
Clay (65.515)
Sand (65.521)
Cream (65.522)
Wheat (65.530)
Brick (65.547)
Terracotta (65.548)
Light beige (65.560)
Turkish red (65.570)
Tile (65.575)
Pastel (65.580)
Cinnamon (65.582)
Hazelnut (65.584)
Dune (65.585)
Mustard (65.550)
Jai-alai green (65.552)
Rough finishing
Smooth finishing
GEOCISA
1.1.4. Special paints
A-4000Matt
Waterbased paint.
Based on acrylic resins with permeable, water resistant, anti-dust properties.Indoor or outdoor.Water dilution and cleanliness.
Recommended for facades, walls, bridges, warehouses, tunnels and parking that may require a quality matt finishing.
15 l
Grey / Matt (62.512)
SILICATO FACADES
Matt
Silicate paint with excellent transpiration.
Based on potassium silicates and inorganic pigments.Indoor or outdoor.Water dilution and cleanliness.
Recommended as a preparatory and finish paint for mineral walls thanks to the anti-blister effect, mildew protection, UV and dirtiness resistance in industrial installations.
15 l
White / Matt (75.301) Colours under request
!
!
!
12 | Juno International Catalogue
JUNOLITE FACADES
Matt
SILICATO 5Matt
Self-cleaning permeable paint for facades.
Based on pliolite resins and organic diluents.Outdoor use.Solvent (D-40) dilution and cleanliness.
Silicate paint with excellent transpiration.
Based on potassium silicates and inorganic pigments.Indoor or outdoor.Water dilution and cleanliness.
Recommended to coat cement and concrete facades and walls.
Recommended as a preparatory and finish paint for mineral walls thanks to the anti-blister effect, mildew protection, UV resistance and dirtiness in industrial installations.
15 l
15 l
White / Matt (62.900)
White / Matt (75.362) Colours under request
1.1.5. Primers and treatments
AKRIL - 80
HIDROCRILWaterbased
MINERAL PRIMERWaterbased
SILOXANO SEALER
Acrylic sealer.
Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Waterbased acrylic sealer with excellent adherence
and deep penetration.
Indoor or outdoor.Water dilution (4:1 Water-Hidrocril) and cleanness.
Waterbased primer with excellent adherence and
deep penetration.
Indoor or outdoor.Water dilution and cleanliness.
Protective primer for porous mineral supports.
Based on polysiloxane resins that reduce the rain absorption on outdoor supports.Outdoor use.No dilution, ready to use.Solvent (D-16) cleanliness.
Recommended to seal old mineral supports and consolidate differences in walls and supports (platter, stone, cement, concrete, old paints).
Recommended for supports with adherence problems or that requires an effective primer to consolidate the support.
Recommended for mineral supports with adherence problems or that requires an effective primer to consolidate the support.It’s also suggested as first coat for silicate paints.
Recommended to improve the rain protection while preserving the transpiration of the support (non vitreous bricks, grainy stone or natural stone). It maintains the original look of the support.
15 l 4 l 750 ml
20 l 4 l 750 ml
15 l
20 l
Colourless (42.115)
Colourless (81.006)
Colourless (75.302)
Colourless (68.104)
Colours are approximations and may vary once applied.! Juno International Catalogue 2012 | 13
WATER RESISTANT
SEALER
Protective primer for porous mineral supports.
Based on aliphatic solvents and aluminium stearates that reduce the rain absorption on outdoor supportsOutdoor use.No dilution, ready to use.Solvent (D-16) cleanliness.
Recommended to improve the rain protection while preserving the transpiration of the support (non vitreous bricks, grainy stone or natural stone).
20 l 4 l 750 ml
Amber (68.101)
1.2.1. Paints for sport facilities and public installations
1.2. Outdoor paints
JUNOLINEAWaterbased
JUNOSPORTWaterbased
JUNOSOLWaterbased
DYNAMOL
Concentrated waterbased paint.
Based on acrylic copolymers.Indoor or outdoor.Water dilution and cleanliness.
Concentrated waterbased paint.
Based on pure acrylic resins with great resistance to weather conditions and bleach.Indoor or outdoor.Water dilution and cleanliness.
Concentrated waterbased paint.
Based on acrylic resins with great adherence, rub and weather conditions resistance.Based on styrene resins.Indoor or outdoor.Water dilution and cleanliness.
Chloro-rubber paint with plastic effect and quick drying.
Based on chloro-rubber resins with great resistance to acids and alkalis.Indoor or outdoor.Solvent (D-40) dilution and cleanliness.
Recommended to signpost sport facilities, fairgrounds and safety at work over natural grass (football fields, farms, plot of lands), ground (building work, mountains and rural paths) or sand (beaches, playgrounds).
Recommended for swimming pools, sport facilities and parking without intense traffic.
Recommended for sport facilities and parking without intense traffic.
Recommended for industrial installations, road signposts, garages or sport facilities. Not suitable for pitch or bituminous asphalts.
4 l
15 l
15 l 4 l 750 ml
White (62.550)
White (06.100)
Blue (06.105)
Jai-alai green (06.152) Tennis red (06.168)
White (06.162) Jai-alai green (06.150) Tennis red (06.160)
White (09.500)
Black (09.501)
Pearl grey (09.533)
Jai-alai green (09.552)
Tennis red (09.568)
10 l
!
!
!
14 | Juno International Catalogue
1.3. Indoor decorative paints
1.3.1. Decorative waterbased paints
JUNORAL B-12Semi-gloss
High quality waterbased paint with anti-microbial
properties to resist mildew.
Based on vinyl polymers with broad spectrum fungicide and bactericide properties.Indoor use.Water dilution and cleanliness.
Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection mildew. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.
15 l 4 l 750 ml
White / Semi-gloss (72.010)
JUNORAL B-10Semi-gloss
JUNORAL B-7 ECOLOGIC
Matt
JUNORAL B-5 FUNMatt / Fungicide
JUNORAL B-7Black / Matt
JUNORAL B-5Matt
High quality waterbased paint.
Based on vinyl polymers.Indoor use.Water dilution and cleanliness.
Waterbased paint with anti-microbial properties to
resist mildew.
Based on acrylic copolymers with broad spectrum fungicide and bactericide properties.Indoor use.Water dilution and cleanliness.
High quality waterbased paint.
Based on acrylic polymers.Indoor use.Water dilution and cleanliness.
Great coverage and performance waterbased paint.
Based on acrylic copolymers.Indoor use.Water dilution and cleanliness.
Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection mildew. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.
Recommended for hospitals, kindergartens, nurseries, baby rooms or rooms for hypersensitive people as it does not liberate any chemical component. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.
Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection against mildew. Damp rub resistance.
Recommended for stylish decoration, tunnel effect improvement or to hide pipes, electric or industrial under roof installations. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.
Recommended for standard use in building and decoration over cement or plaster. Damp rub resistance.
15 l 4 l 750 ml
15 l 4 l 750 ml
15 l 4 l 750 ml
15 l 4 l
15 l 10 l 4 l 2 l 750 ml
White / Semi-gloss (72.000)
White / Matt (72.197)
White / Matt (73.023)
Black / Matt (72.101)
White / Matt (73.001)
Ecological certificated waterbased paint,
hypoallergenic and odourless.
Based on 100% solvent free vinyl polymers.Indoor use.TÜV and Euro ecolabel certifications.Water dilution and cleanliness.
Juno International Catalogue | 15
1.3.2. Certified waterbased paints
JUNORAL N-5Matt / Quality certification
AENOR quality certificated waterbased paint (type II)
that guaranties over 5.000 wash cycles under
UNE 48243 procedures.
Based on water dispersed resins.Indoor use.Water dilution and cleanliness.
Recommended for standard use in building and decoration over cement or plaster in accordance with the prescribed and certificated memory project. Durable finishing withstands frequent washings. Great coverage and performance.
15 l 4 l 750 ml
White / Matt (73.040) Flameproof
B-s1,d0
1.3.4. Textured paints
1.3.3. Professional waterbased paints
CASTOR PICAR EXTRA
J-300Satin
J-28Matt
J-25Matt
CASTOR-NMatt / Quality certification
Thick textured paste.
Based on excellent hardness adherence and whiteness acrylic copolymers.Indoor use.Water dilution and cleanliness.
Waterbased paint.
Based on water dispersed resins.Indoor or outdoor.Water dilution and cleanliness.
Waterbased paint.
Based on acrylic copolymers, titanium bioxide and spread activators.Indoor use.Water dilution and cleanliness.
Waterbased paint.
Based on acrylic copolymers, titanium bioxide and spread activators.Indoor use.Water dilution and cleanliness.
AENOR quality certificated waterbased paint (type I)
that guaranties over 1.000 wash cycles under
UNE 48243 procedures.
Based on water dispersed resins.Indoor use.Water dilution and cleanliness.
Recommended to hide substrate imperfections on stairs, public spaces, offices or rooms.
Recommended for standard use in building and decoration over cement or plaster. Good whiteness, coverage and easy application. Damp rub resistance.
Recommended for standard use in building and decoration over cement or plaster, especially to hide substrate imperfections and visible joins in plasters. Damp rub resistance. Water steam permeable.
Recommended for standard use in building and decoration to hide substrate imperfections. Damp rub resistance.
Recommended for standard use in building and decoration over cement or plaster in accordance with the prescribed and certificated memory project. Durable finishing withstands frequent washings. Great coverage and performance.
15 l 10 l 4 l
15 l 4 l
15 l 4 l
15 l 4 l
15 l 4 l
White / Satin (71.055)
White / Matt (73.168)
White / Matt (73.150)
White / Matt (74.304)
White / Matt (73.113)
16 | Juno International Catalogue Colours are approximations and may vary once applied.!
CASTOR GOTA-PIK
Soft textured paste.
Based on excellent hardness adherence and whiteness acrylic copolymers.Indoor use.Water dilution and cleanliness.
Recommended to create fine droplet textures and hide substrate imperfections.
15 l
White (74.303)
1.3.5. Colorexpress customised production system
COLOREXPRESS Customised production system for coloured
waterbased paints that assures the perfect
homogenization of the quality and colour of the
paint, under the customer specifications.
Ask the commercial department for detailed information about this system.
15 l
Colours under request (73.700)
1.3.6. Colorants, Additives and Others
JUNORALWaterbased
UNIVERSAL JUNO
Concentrated liquid colorant.
Indoor use* and outdoor.Vermillion red, Lemon yellow and Metis green colorants are only suitable for indoor.
Universal concentrated colorant.
Indoor use* and outdoor. Vermillion red and Lemon yellow colorants are only suitable for indoor.
Recommended to dye any paint.The colorant proportion should not exceed 3%.
Recommended to dye any paint. The colorant proportion should not exceed 3%.
750 ml 125 ml
125 ml
Capri blue (78.013)
Vermillion red* (78.018)
Lemon yellow* (78.026)
Metis green* (78.055)
Mountain green (78.056)
Chamois (78.066)
Deep ochre (78.064)
Black (78.001)
Turkish red (78.070)
Brown (78.080)
Blue (79.514)
Vermillion red* (79.518)
Lemon yellow* (79.526)
Green (79.555)
Black (79.501)
Oxide red (79.519)
Ochre yellow (79.565)
Brown (79.580)
MISKY-MISKYFungicide additive
JUNO GLUEGlue
Ready to add preparation with broad spectrum
fungicides.
Based on heterocyclic to perform an intense and long lasting broad spectrum action moulds and seaweeds.
Waterbased glue for manual artwork.
Recommended as additive for waterbased paints and coats to enhance the protective properties.Intensive shake before use.
125 ml
1 kg 500 gr 125 gr
White (82.101)
White (79.597)
!
!
Juno International Catalogue | 17Colours are approximations and may vary once applied.!
1.4.1. Enamels
JUNOLACGlossy, satin or matt
Synthetic enamel.
Based on high solid alkyd resins and pigments.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution and cleanliness.
Recommended for metallic and wood surfaces. Application on thin coats to guarantee inner dryness.
4 l 750 ml 375 ml
4 l 750 ml 375 ml
4 l 750 ml
White (15.000)
Black (15.001)
Danube blue (15.006)
Horizon blue (15.007)
Cobalt blue (15.013)
Navy blue (15.014)
Bordeaux red (15.021)
Army grey (15.032)
Pearl grey (15.033)
Bluish grey (15.034)
Medium grey (15.037)
Green (15.057)
Ochre (15.065)
Dark ochre (15.074)
Leather (15.067)
British red (15.068)
Arabic brown (15.069)
Brown txoko (15.071)
Brown (15.073)
Glossy green (15.048)
Spring green (15.049)
Permanent green (15.050)
Cream (15.061)
Pine green (15.053)
Sea green (15.059)
Bone (15.060)
Chamois (15.066)
Orange (15.017)
Red (15.018)
Bright red (15.020)
Lemon yellow (15.026)
Golden yellow (15.027)
White (15.100) Black (15.101)
White (15.200) Black (15.201)
Glossy finishing
Satin finishing (only indoor)
Matt finishing (only indoor)
1.4. Enamels
JUNOLAC ANTIRUST
Glossy
Antirust synthetic enamel.
Based on resins and antirust additives.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Recommended for metallic or steel surfaces where it’s not possible an intense preparation of the surface with an anti-rust primer (huge metallic structures, railings, fences, bridges).
4 l 750 ml
White (04.651) Black (04.652) Colours under request
JUNOPLUSGlossy, satin or matt
Synthetic.
Based on alkyd resins.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution and cleanliness.
Recommended for properly primed metallic, wood or masonry surfaces.
4 l 750 ml
4 l 750 ml
4 l 750 ml
White (16.000)
Black (16.001)
Blue (16.008)
Bright blue (16.010)
Light grey (16.031)
Cloud grey (16.038)
Dark grey (16.039)
Meadow green (16.054)
Moss green (16.058)
Arabic brown (16.069)
Medium yellow (16.029)
Ivory (16.005)
Traffic grey (16.006)
Chamois (16.002)
Ochre (16.007)
Brown (16.003)
Grass green (16.004)
Carriage red (16.021)
Blood red (16.022)
Carriage green (16.011)
Overseas blue (16.009)
Fire red (16.012)
White (16.100) Black (16.101)
White (16.200) Black (16.201)
Glossy finishing
Satin finishing (only indoor)
Matt finishing (only indoor)
Flameproof
B-s1,d0
!
!
18 | Juno International Catalogue Colours are approximations and may vary once applied.!
OXIFORJA Wrought iron finishing synthetic with mica particles.
Based on alkyd resins and antirust pigments and additives that provide elasticity, bonding and highly water resistant properties.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Recommended for lampposts, manhole covers, fences, benches, litter bins, metallic doors and any other urban furniture.
4 l 750 ml
Black (05.700)
Steel grey base (05.701)
Oxide red (05.723)
Annealed blue (05.720)
Gold (05.722)
Bronze green (05.721)
AQUALACGlossy, Satin or matt
Waterbased
Great coverage waterbased.
Based on acrylic resins with quick dry, low odour and great resistance to the outdoor.Indoor or outdoor (only glossy finishing).Water dilution and cleanliness.
Recommended for properly primed metallic, wood or masonry surfaces.
4 l 750 ml
4 l 750 ml
4 l 750 ml
Colours under request
White base / P (10.300)
Medium base / D (10.302)
Transparent base / TR (10.303)
Yellow base (10.304)
Red base (10.305)
White base / P (10.400) Medium base / D (10.402) Transparent base / TR (10.403)
White base / P (10.500)
Glossy finishing
Satin finishing (only indoor)
Matt finishing (only indoor)
1.4.2. Primers
MULTISUPPORT PRIMER
WORKSHOP PRIMER
METALEX
Preparatory synthetic primer.
Based on deep fixing resins with auto levelling finishing for easy paint.Indoor or outdoor.Solvent (D-17) dilution and cleanliness.
Quick drying preparatory synthetic primer.
Based on alkyd resins and ferric oxides.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Antirust lead-free synthetic primer.
Based on soya oil resins and zinc phosphates.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Recommended for ferric, metallic, aluminium, galvanised, PVC or indoor wood surfaces.
Recommended for the preparation of ferric surfaces.
Recommended for metallic (except aluminium and galvanised) surfaces that require field corrosion protection.
15 l 4 l 750 ml
15 l 4 l 750 ml
4 l 750 ml
White (27.040)
Oxide red (22.110) Grey (22.111)
White (27.000)
METALEX 212 Antirust synthetic primer.
Based on antirust resins.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Recommended for ferric surfaces (doors, structures, fences, tanks) that require field corrosion protection.
4 l 750 ml
Orange (22.002)
Suitable for JUNOMATIC
Suitable for JUNOMATIC
!
!
!
!
Juno International Catalogue | 19
1.4.3. Sealers
WATERPRIMWaterbased
Antirust synthetic primer.
Based on antirust resins.Indoor or outdoor.Water dilution and cleanliness.
Recommended for properly prepared ferric, metallic, aluminium, galvanised, PVC surfaces that require field corrosion protection and are located in poor ventilated areas.
4 l 750 ml
White (30.006)
AQUATAPAOdourless / Waterbased
Waterbased waterproof coat.
Based on anti damp resins.Indoor use.Water dilution and cleanliness.
Recommended for the protection of mineral or wood surfaces with water soluble stains, exposed to fumes, vapour or humidity condensation areas.
15 l 4 l 750 ml
White / Matt (21.205)
ANTI-STAINOdourless / Preventive
Anti-stain preventive synthetic coat.
Based on plioway resins with anti-stain and anti-microbial properties to resist mildew.Indoor use.Solvent (D-69) dilution and cleanliness.
Recommended for any support with humidity, grease or nicotine stains.
15 l 4 l 750 ml
White (21.350)
HANGERS SEALER
AQUASELLPowder applied plaster
Waterbased
NATURSELLWaterbased
Synthetic coverage coat.
Based on high resistance and coverage alkyd resins.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Waterbased coverage sealer.
Based on acrylic resins with high coverage and resistance.Indoor or outdoor.Water dilution and cleanliness.
Waterbased sealer.
Based on acrylic resins with high coverage and resistance.Indoor or outdoor.Water dilution and cleanliness.
Recommended to prepare wooden or masonry surfaces.
Recommended as a preparatory coat over substrates with severe differences in paint absorption (masonry, plaster joins o powder applied plasters).
Recommended for wooden and masonry surfaces.
15 l 4 l 750 ml
15 l
4 l 750 ml
White / Matt (21.000)
White / Matt (21.203)
White / Matt (21.100)
20 | Juno International Catalogue Colours are approximations and may vary once applied.!
1.5. Junomatic tintometric system
JUNOPROFSatin / Matt
JUNOMALTEGlossy / Satin
JUNOMATIC COLORANT
Waterbased base paint to dye.
Satin or matt finishing.Indoor or outdoor.Water dilution and cleanliness.
Synthetic base paint to dye.
Glossy or satin finishing.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution and cleanliness.
Colorant to dye waterbased or synthetic bases.
Recommended for standard use in building and decoration over cement or plaster.
Recommended for standard application on metallic and wooden surfaces.
Recommended for Junomatic tintometric system.
10 l 4 l 750 ml
4 l 750 ml
10 l 4 l 750 ml
4 l 750 ml
1 l
White base / P (88.865) Medium base / D (88.866) Transparent base / TR (88.867)
White base / P (88.990) Medium base / D (88.991) Transparent base / TR (88.992)
White base / P (88.868) Medium base / D (88.869) Transparent base / TR (88.870)
White base / P (88.993) Medium base / D (88.994) Transparent base / TR (88.995)
JS / Black (88.700)
TS / Oxide ochre (88.707)
WS / Oxide brown (88.710)
XS / Grey (88.711)
LS / Blue (88.701)
PS / Green (88.704)
KU / Oxide white (88.714)
NS / Red (88.703)
QS / Intense yellow (88.705)
RS / Intense blue (88.706)
VS / Intense red (88.709)
YS / Oxide red (88.712)
US / Orange (88.708)
MS / Yellow (88.702)
ZS / Violet (88.713)
BS / Magenta (88.715)
Satin finishing
Glossy finishing
Matt finishing
Satin finishing
1.6. Wood treatment and decoration1.6.1. Waterbased varnishes and woodprotectors
AQUEOUS FLOOR WOODPROTECTOR
Waterbased wood protector varnish, odourless.
Based on acrylic resins.Indoor use.Water cleanliness.
Recommended as easy to sand wood protector for any wooden surface. Great filling performance, easy odourless application and quick drying. It’s suggested to finishing with Aqueous floor varnish.
4 l
Colourless (82.414)
ANTI-DAMP SEALER
Quick drying synthetic waterproof coat.
Based on anti damp resins and cement particles.Indoor or outdoor.Solvent (D-16) dilution and cleanliness.
Recommended for occasional damp, grease or oil stains. Quick dry of the support to facilitate the paint or wallpaper.
4 l 750 ml
White / Matt (88.000)
Suitable for JUNOMATIC
Suitable for JUNOMATIC
Suitable for JUNOMATIC
!
Juno International Catalogue | 21Colours are approximations and may vary once applied.!
MULTITREATMENT (BONDEX)
EXTRA WOODPROTECTOR
(BONDEX)
Waterbased wood protector with active effect against
insects, termites and fungus.
Indoor or outdoor.Water cleanliness.
Waterbased wood protector varnish, odourless, with
active effect against insects, termites and fungus.
Indoor or outdoor.Water cleanliness.
Recommended for any kind of wooden surfaces, indoor or outdoor, that may require special preventive or curative treatments. Suitable for any later decorative finishing (lasur varnish, varnishing or decorative paint).
Recommended for any kind of wooden surfaces, indoor or outdoor, that may require special preventive or curative treatments. Suitable for any later decorative finishing (lasur varnish, varnishing or decorative paint).
5 l 750 ml
5 l 750 ml
Colourless (41.250)
Colourless (41.201)
AQUEOUS FLOOR VARNISH
Glossy
AQUADUR VARNISH
Glossy, satin or matt
Odourless waterbased varnish.
Based on polyurethane resins that create a pleasant to the touch and yellowish resistant film.Indoor use.Water cleanliness.
Waterbased varnish.
Based on acrylic resins that create a pleasant to the touch and yellowish resistant film.Indoor use.Water cleanliness.
Recommended for any floor, due to the odourless and quick drying application, rub resistance properties and easy cleaning. It’s suggested the wood preparation with Aqueous Floor Woodprotector.
Recommended for any kind of wooden surfaces.
4 l 750 ml
4 l 750 ml
Colourless / Glossy (82.410)
Colourless / Glossy (82.480) Colourless / Satin (82.481) Colourless / Matt (82.482)
LASUR AQUEOUS
Waterbased damp-resistant lasur varnish, with deep
penetration properties.
Based on acrylic resins, colourless pigments and bactericides that create a micro porous and elastic film, UV resistant and transpired to the water vapour within the wood.Indoor or outdoor (except colourless).Water cleanliness.
Recommended for any wooden surface (doors, windows, fences, and porches) that once exposed to the weather conditions may diminish without getting chipped, so that it’s possible to renovate the beauty of the wood thanks to successive new applications, i.e., without removing old treatments.
4 l 750 ml
Colourless / Satin (82.451)
Chestnut (82.460)
Oregon pine (82.461)
Oak (82.462)
Rustic oak (82.463)
Walnut (82.464)
Mahogany (82.465)
Rosewood (82.466)
Teak (82.467)
Iroko (82.468)
CLASSIC WOODPROTECTOR
(BONDEX)
Wood protector with active effect against termites
and fungus.
Indoor or outdoor.Solvent (D-16) dilution.
Recommended for any kind of wooden surfaces, indoor or outdoor, that may require special preventive or curative treatments. Suitable for any later decorative finishing (lasur varnish, varnishing or decorative paint).
5 l 750 ml
Colourless (41.200)
1.6.2. Synthetic varnishes and woodprotectors
!
22 | Juno International Catalogue Colours are approximations and may vary once applied.!
1.6.3. Floor synthetic varnish
1.6.4. Outdoor synthetic varnishes
JUNODUR VARNISHGlossy or satin
Polyurethane synthetic varnish.
Based on alkyd resins that create a pleasant to the touch and yellowish resistant film.Indoor use.Solvent (D-16) cleanness.
Recommended to varnish or restore wooden floor that may require resistance to home cleaning products and daily use.
4 l 750 ml
Colourless / Glossy (44.001) Colourless / Satin (44.002)
JUNOLAC VARNISHGlossy or satin
Synthetic varnish with UV protection.
Based on alkyd resins that create a pleasant to the touch and yellowish resistant film.Indoor or outdoor (only glossy finishing).Solvent (D-16) dilution.
Recommended for any kind of wooden surfaces.
4 l 750 ml 375 ml
Amber / Glossy: 42.037 Colourless / Satin: 42.038
JUNOTINTE VARNISH
Glossy
Synthetic varnish with UV protection.
Based on alkyd resins and UV filters with decorative and protective properties.Indoor or outdoor.Solvent (D-16) cleanness.
Recommended for any kind of wooden surfaces.
750 ml 350 ml
Pine (42.040)
Walnut (42.041)
Mahogany (42.042)
Chestnut (42.043)
Teak (42.044)
Rosewood (42.045)
Oak (42.046)
CLASSIC LASUR (BONDEX)Matt or satin
Synthetic damp-resistant lasur varnish, with deep
penetration properties.
Based on specific resinsIndoor or outdoor.Solvent (D-16) cleanness.
Recommended for any wooden surface (doors, windows, fences, and porches) that once exposed to the weather conditions may diminish without getting chipped, so that it’s possible to renovate the beauty of the wood thanks to successive new applications, i.e., without removing old treatments. It’s suggested to coat a preparatory matt varnish and finish with 2 protective satin coats.
5 l 750 ml
Colourless / Matt (41.210)
Colourless / Satin (41.230)
Oak / Matt (41.211)
Oak / Satin (41.231)
Mahogany / Matt (41.212)
Mahogany / Satin (41.232)
Chestnut / Matt (41.213)
Chestnut / Satin (41.233)
Oregon pine / Matt (41.214)
Oregon pine / Satin (41.234)
Teak / Matt (41.215)
Teak / Satin (41.235)
Rosewood / Matt (41.216)
Rosewood / Satin (41.236)
Walnut / Matt (41.217)
Walnut / Satin (41.237)
Macasar / Matt (41.218)
Macasar / Satin (41.238)
California pine / Matt (41.219)
California pine / Satin (41.239)
YATCH SPAR VARNISH
Glossy
Synthetic spar varnish with weather and UV
resistance.
Based on elastic resins and UV filters with long lasting decorative and protective properties.Indoor or outdoor.Solvent (D-16) cleanness.
Recommended for wooden surfaces under extreme weather conditions such as intense humidity, rain, sea or permanent exposition to the sun.
4 l 750 ml
Amber / Glossy (42.036)
!
!
Juno International Catalogue | 23
TEAK OIL (BONDEX)Tropical wood oil
Specific oiling for exotic wood.
Based on alkyd resins and UV filters.Indoor or outdoor.Solvent (D-16) cleanness.
Recommended to preserve and enhance the natural beauty of exotic and tropical wood, extend the duration and protection against the elements. Recommended for garden furniture as well as indoor quality woods.
4 l 750 ml
Colourless (41.252)
1.7. Plasters and fillers
FINISHING AND SMOOTHING
PLASTER
READY TO USE PLASTER
INDOOR PROFESSIONAL
PLASTER
OUTDOOR PROFESSIONAL
PLASTER
FILLER
MULTIUSE FILLER
FIBER PLASTER
Dust plaster for supports to be painted or
wallpapered.
Indoor use.Dust.
Ready to use high quality plaster.
Indoor use.Ready to use.
Ready to use high quality plaster.
Indoor use.Ready to use.
Ready to use plaster and filler.
Outdoor use.Ready to use.
Dust plaster for support preparation.
Indoor use.Dust.
Dust plaster for support preparation.
Indoor or outdoor.Dust.
Elastic ready to use plaster.
Indoor or outdoor.Ready to use.
Recommended to hide small imperfections, cracks, holes, marks, joining, etc.
Recommended for support preparation.
Recommended for intensive application.
Recommended for supports exposed to water conditions.
Recommended to smooth out supports before being painted or wallpapered.
Recommended to smooth-out supports before being painted.
Recommended to mend small cracks on supports.
15 kg 5 kg 1 kg
1 kg 500 g
5 kg
5 kg
15 kg 5 kg
1 kg
750 gr
Code (77.000)
Code (77.200)
Code (77.202)
Code (77.203)
Code (77.401)
Code (77.050)
Code (77.250)
24 | Juno International Catalogue Colours are approximations and may vary once applied.!
1.8. Solvents
D-16Mineral
D-17Spray gun
D-40Chloro-Rubber
D-45Universal
D-69Odourless
D-70Junoretano
D-90Epoxy
Mineral solvent for enamels and synthetic primers.
Mineral solvent for enamels and synthetic primers.
Suitable for spray gun application.
Solvent for pliolite and chloro-rubber paints.
Universal diluent.
Solvent for plioway based paints.
Solvent for polyurethane based paints.
Solvent for epoxy based paints.
20 l 5 l 1 l 500 ml
Code (50.012)
Code (50.004)
Code (50.000)
Code (50.017)
Code (50.073)
Code (50.007)
Code (50.010)
D-15
PRIMER
STOVE
CLEAN
ALCOHOL
ZIAMAR
VINYL
Solvent for quick drying enamels.
Solvent for Shop primer.
Solvent for oven drying enamels.
Solvent for metallic surfaces.
Solvent for Dynapok S/D Epoxin.
Solvent for zinc silicate.
Solvent for vinyl paints.
Code (50.005)
Code (50.705)
Code (50.702)
Code (50.803)
Code (50.802)
Code (50.712)
Code (50.708)
2. Industrial sectorEfficiency, the answer to industrial requests. Paint treatments may be considered standard unless we start thinking about alternative uses not related to our daily use in decoration. Almost any support is suitable to be painted. Most of them need to be painted to improve protection. Industrial paint is characterised by intensive use, law regulations or companies’ high production standards, so the paint should be able to withstand demanding requirements and specifications. Industrial paints, if ever, require proactive R&D, trained staff and individual prescription so not all paint manufacturers are able to address the industrial sector.
26 | Juno International Catalogue Colours are approximations and may vary once applied.!
2.1. Primers
2.1.1. Primers
DYNALINE PRIMER
DYNAPOK PRIMER
Zinc Phosphate2 components
CHLORO-RUBBER PRIMER
Zinc Phosphate
DYNAPOK THICK COAT
PRIMER2 components
SHOP PRIMER
EPOXI SHOP PRIMER
2 components
Quick drying protective primer.
Based on alkyd resins. Apply over a suitable anti-oxidant primer to prevent substrate corrosion, in order to achieve a fully guaranteed, long-lasting and effective protection.Outdoor use.Solvent (D-17) dilution and cleanliness.
High adherence two components epoxy primer.
Based on epoxy resin cured with amine adducts and an anticorrosive pigment blends.Indoor or outdoor.Solvent (D-90) dilution and cleanliness.
High adherence and resistance chloro-rubber primer.
Based on chlorinated-rubber resins and zinc phosphate pigments combined with non-saponifiable plasticers.Indoor or outdoor.Solvent (D-40) dilution and cleanliness.
Two components high-body primer epoxy.
Based on epoxy resins and zinc phosphate pigments. Free from lead and chromates.Solvent (D-90) dilution and cleanliness.
Quick drying primer.
Based on phenol reactive polyvinyl - butiral resin and anti-corrosive pigments.Primer solvent dilution and cleanliness.
High adherence and quick drying two components
primer epoxy.
Based on a combination of phenolyc reactive polyvinyl-butiral resin and anti-corrosive pigments.Indoor or outdoor.Solvent (D-15) dilution and cleanliness.
Recommended for the protection of all kinds of iron and steel surfaces, such as machinery, cranes, fencing, etc. It provides over 40 micrometres per coat.
Recommended as a primer for POXEMYC and DYNAPOK systems, according to specifications.
Recommended to protect outdoor exposed steel surfaces. Good adherence on galvanised steel surfaces.
Recommended for the protection of metal and steel surfaces in chemicals, marine or industrial environments. It’s also suitable as middle coat in DYNAPOK and POXEMYC systems, according to specifications. It provides over 60 micrometres per coat.
Recommended for efficient protection between sandblasting and calamine removing processes and the final paint application is desired. It also provides good results when applied to light-alloy based polished surfaces and copper and lead surfaces. It is recommended as primer for systems exposed to high temperatures up to 200 °C maximum. It does not affect welding lines, and does not form pores. Line edges remain intact and it does not propagate flames. It provides over 15 micrometres per coat. The use of nitrocellulose, chloro-rubber, vinyl and some special coal-tar paints for repainting is not recommended.
Recommended for steel and iron surfaces, whenever efficient protection between sandblasting and calamine removing processes and the final paint application is desired. It also provides good results when applied to light-alloy based polished surfaces and copper and lead surfaces. It is recommended as primer for systems exposed to high temperatures up to 200 °C maximum. It provides over 15 micrometres per coat.
20 kg 5 kg
15 l 4 l
15 l
15 l
15 l
15 l
Grey (22.807) Red (22.812)
Grey (22.722) Red (22.700)
Grey (21.855)
Reddish brown (22.725) Grey (22.726)
Black (24.701) Grey (24.714) Red (24.712)
Red (24.725) Grey (24.726)
Flame-proof M1
!
!
!
!
!
!
Juno International Catalogue | 27Colours are approximations and may vary once applied.!
2.1.2. High zinc content primers
2.1.3. Middle coatings
ZIAMAR E.T. PRIMER
2 components
DYNAPOK HB
2 components
ZINC EPOXI PRIMER
2 components
DYNAPOK HBAC
2 components
High zinc content two components coating.
Based on zinc-ethyl silicate with excellent corrosive and abrasion resistance, UV radiation resistance, temperature resistance (400 °C in continuous regime), resistance to alcohols (methyl, ethyl, butyl, amyl, glycerine), petrol derivatives (fuel oil, gas oil, gasoline, kerosene, white spirit, aromatic hydrocarbon), ketenes (methyl isobutyl ketene, amyl methyl ketene) and mineral oil resistance.E.T. solvent dilution and cleanliness.
Thick coat two components epoxy coating.
Based on epoxy resins and hardeners that provide excellent flexibility and abrasion-resistant hardness, waterproof properties and petrol, lube oils and similar products splashes resistance.Solvent (D-90) dilution and cleanliness.
High zinc content two components coating.
Based on epoxy resin pigmented with metallic zinc powder and cured with polyamide. The high zinc powder content isolates and inhibits metal from oxidation, providing cathode protection.Solvent (D-90) dilution and cleanliness.
High solid content two components epoxy coating.
Solvent (D-90) dilution and cleanliness.
Recommended as anti-corrosive primer for metal structures, bridges, tanks, silos, off-shore platforms, vessel hulls.
Recommended as middle layer in DYNAPOK & POXEMYC systems and for previously primed ferrous surfaces exposed to aggressive and industrial environments, such as tanks, structures, lifting gear and transports. It provides 80-100 micrometres per coat.Micaceous grey (7.751) facilitates the second paint.
Recommended as anti-corrosive primer in epoxy systems, to offer long-term protection for steel surfaces exposed to highly corrosive marine or industrial environments.
Recommended for surfaces where sandblasting is not recommended and manual cleaning is required instead. It provides over 125 micrometres per coat.
15 l
15 l
15 l
15 l
Greenish Grey (25.700)
Micaceous grey (7.751) Grey (7.750) White (7.75_)
Grey (22.800) INTA grey 164414 (22.805)
Aluminium (7.765) White (7.760) Grey shades (7.76_)
2.2. Enamels
2.2.1. Enamels
DYNALINE S/RQuick drying
Quick drying synthetic enamel.
Based on alkyd resins.Solvent (D-17) dilution and cleanliness.
Recommended for the protection of all kinds of iron and steel surfaces, such as machinery, cranes, fencing, etc.Apply over a suitable anti-oxidant primer to prevent substrate corrosion, in order to achieve a fully guaranteed, long-lasting and effective protection. It’s recommended to repaint before 24 h.
15 l
Colours under request (2.898)
!
!
!
!
28 | Juno International Catalogue Colours are approximations and may vary once applied.!
DYNADUR S/HOven drying
DYNAMOL INDUSTRIAMetallic surfaces
DYNAMOL FLOORS
PAVIMYC FLOORS2 components
Oven drying (110-150 °C) enamel.
Based on glytherophthalic resins, urea formaldehyde resins and melamine resins hardeners, combined with inert pigments.Solvent (stove) dilution and cleanliness.
Chloro-rubber enamel with smooth satin finish.
Based on chloro-rubber and non-saponifiable plasticers combined with pigments and inert extenders. It combines excellent chemical and mechanical resistance with easy to apply and quick drying properties.Indoor or outdoor.Solvent (D-40) dilution and cleanliness.
Chloro-rubber enamel with plastic finishing effect.
Based on chloro-rubber and non-saponifiable plasticersIndoor or outdoor.Solvent (D-40) dilution and cleanliness.
Two components epoxy enamel for the protection of
concrete pavements and metallic surfaces.
Based on epoxy polyamide resins with excellent hardness and adherence while preventing the premature damage of concrete and dust.Indoor use.Solvent (D-90) dilution and cleanliness.
Recommended as widely use enamel with excellent mechanical and chemical properties. Apply preferably on pre-treated or primed surfaces. It combines easy application and quick drying at average temperatures while providing a smooth glossy finish. This enamel is suitable for any type of devices, especially serially produced, as due to its characteristics is ideal for series chain painting in applications (storage racks, instruments, metal cupboards, machinery parts, tools, etc.)
Recommended for the protection of metal structures exposed to marine or industrial environments where withstanding the action or occasional direct contact to aggressive, acid or alkali agents is required.
Recommended for surfaces exposed to marine or industrial environments such as roads, garages, sport facilities, etc.It’s not suitable for asphaltic surfaces.
Recommended for weathering exposed concrete floors in indoor car parks, garages, laboratories, chemical and pharmaceutical plants, sugar and petrol refineries, electroplating, mechanical workshops, and in general for any type of old and new industrial floorings. Also suitable for wooden floors.
15 l
15 l
15 l 4 l
15 l
Colours under request (4.998)
Colours under request (9.799)
White (09.500)
Black (09.501)
Pearl grey (09.533)
Jai-alai green (09.552)
Tennis red (09.568)
British red (7.812) Green (7.814) Grey (7.807)
DYNAPOK2 components
WATERBASED DYNAPOK
2 components
Two components epoxy enamel with great hardness
and glossy finish.
Based on epoxy polyamide resins with excellent properties against water, grease, acids or diluted alkali.Indoor use.Solvent (D-90) dilution and cleanliness.
Two components waterbased epoxy enamel.
Based on epoxy resin-reactive binder with a blend of pigments and load matter, and water dissolved hardener.Water dilution and cleanliness.
Recommended for metallic surfaces chemical and pharmaceutical plants, sugar and petrol refineries, electroplating, mechanical workshops, and in general for any type of old and new industrial floorings. It is also recommended to paint unpolished concrete floors.
Recommended as general purpose industrial concrete coating for asphalt surfaces not sufficiently ventilated, where the application of conventional paints containing organic solvents would create a highly toxic atmosphere.
15 l
15 l
White (7.700) Colours under request
White 9010 (7.900) White 9003 (7.910) Colours under request
DYNAPOK EPOXIN S/D
2 components
Anti-corrosive solvent-free two components epoxy.
Based on epoxy resins with high chemical resistance, hardness and lack of any toxicity contamination.
Recommended for the interior protection of concrete or steel tanks and silos in food industries. Once the mixture is diluted, to be apply in less than 20 min.
4 l
White (7.952) Red (7.950)
Flameproof
B-s1,d0
!
!
!
Juno International Catalogue | 29Colours are approximations and may vary once applied.!
2.2.2. Aluminium Enamels
POXEMYC UV ALUMINIUM
2 components
POXEMYC UV2 components
DYNAVIL
Two components polyurethane enamel with smooth
glossy finishing.
Based on acrylic resins, inert pigments and hardeners with maximum resistance to the outdoor, UV and heat (up to 150 °C).Solvent (D-17) dilution and cleanliness.
Two components polyurethane enamel with great
resistance to acids, solvents, abrasion, weathering,
light, and even good resistance to heat (up to 150 °C).
Based on hydroxilated acrylic resins combined with inert pigments and multipurpose aliphatic isocyanine hardener.Solvent (D-17) dilution and cleanliness.
Vinyl.
Based on vinyl chloride and vinyl acetate copolymers with non-saponifiable plasticizers and inert pigments.
Recommended for any metallic, wood, fibreglass or PVC surface that may require decorative finishing (facades, monuments) to be exposed to aggressive and industrial environments (tanks, structures, lifting gear and transports.
Recommended for metallic, concrete, wood, polyester with glass fibre or PVC surfaces, particularly where maximum ageing resistance is required, either to weathering, chemical agents or heat up to 150 °C. Ideal for wagons or cisterns, tanks, machinery, vessels, industrial buildings with aggressive atmospheres.
Recommended for painting and marking of textile or canvas surfaces.
15 l 4 l
15 l
1 l
Aluminium 9006 (8.824) Aluminium 9007 (8.847)
White (8.800) Colours under request
White (13.700)
Green (13.712)
Yellow (13.702)
Blue (13.705)
Red (13.711)
METALLIC ALUMINIUM
FLAME ALUMINIUM
OUTDOOR ALUMINIUM
DESOXIDINA ALUMINIUM
Aluminium enamel with smooth glossy finishing.
Based on polyurethane modified resins and aluminium metallic powder.Solvent (D-40 or D-17) dilution and cleanliness.
Thermo-stable metallic enamel.
Based on silicone and alkyd resins pigmented with aluminium metallic powder.Solvent (D-17) dilution and cleanliness.
Aluminium enamel with smooth glossy finishing.
Based on phenol resin and aluminium metallic powder.Solvent (D-45 or D-17) dilution and cleanliness.
High temperature metallization process enamel.
Based on urea formaldehyde and alkyd resins pigmented with aluminium metallic powder.Solvent (D-15) dilution and cleanliness.
Recommended as finishing coat for all kinds of metallic surfaces, due to its anticorrosive and waterproofing properties and maximum humidity resistance.
Recommended for the protection of metallic components exposed through long time periods to temperatures up to 650 °C. Note that painted surfaces can not be suddenly exposed to temperature rises as blisters may be formed, temperatures up to 350 °C must be gradually achieved instead.
Recommended as finishing coat for all kinds of metallic surfaces, due to its anticorrosive and waterproofing properties and maximum humidity resistance.
Recommended for marking areas on iron, steel, stainless steel or nickel surfaces which must be welded or assembled. It protects surfaces against oxidation by providing a protective action until the final casting and assembly. It is suitable for high temperature (600 °C) application, where the steel metal surfaces can not be sandblasted as it fixes aluminium to the metal substrate protecting it against oxidation and providing it with an aluminium metallic finish.
15 l
15 l
15 l 4 l
15 l
Aluminium 9006 (5.802) Aluminium 9007 (5.807)
Aluminium, not exceeding 350 °C (5.850) Aluminium not exceeding 650 °C (5.851)
Aluminium (5.806)
Aluminium (5.805)
!
!
!
!
!
!
Flame-proof M1
30 | Juno International Catalogue
2.3. Special industrial paints
2.3.1. Intumescent paint
2.3.2. Bituminous paints
2.3.3. Antigraffiti varnish
WIP
DYNAPOK ASPHALT2 components
ANTIGRAFFITI VARNISH2 components
ASPHALT MASTIC
Waterbased intumescent (thermal-insulating) paint
with fire-extinguishing properties.
The paint reacts when exposed and in contact with fire, creating thermal-insulating intumescences and releasing fire-extinguishing salts which avoid the inflammation of combustible materials and delays the destruction of metallic structures, while maintaining its mechanical properties.Ready to use, do not dilute.Water cleanliness.
Bituminous two components epoxy paint.
Based on epoxy resins with maximum resistance, adherence and mechanical properties.Solvent (D-90) dilution and cleanliness.
Two components polyurethane glossy varnish.
Solvent (D-70) dilution and cleanliness.
Bituminous paint.
Based on natural asphalts and petrol oxy asphalts combined with non-saponifiable resins and inert extenders.Solvent (D-17) dilution and cleanliness.
Recommended for the protection of steel structures in buildings, department stores, shops, hospitals, clubs, hotels, restaurants, offices, schools and any other facility where fire damage protection is needed. Official certification (LICOF) against fire: 30-60 minutes.
Recommended to protect metal surfaces under continuous or alternate immersion in fresh water or salt water, highly corrosive atmospheres, and aggressive alkali and moderately acid ic chemicals immersion.
Recommended to facilitate the cleaning process of graffiti on facades. The treatment must be applied in advance.
Recommended to provide protection for all kinds of substrates where appearance is not a key factor, such as containers and wagons, underground tanks or piping in direct contact with water or weathering, gates, bridges, ports, etc. It provides over 50 micron per coat.
20 kg
15 l
4 l
15 l
White (89.050)
Black (7.850)
Colourless (44.270)
Black (87.702)
since 1927
www.junoindustrial.com | infoweb@juno.es
(03.
0112
/v1)
top related