jotne_krakeroy
Post on 29-Mar-2016
216 Views
Preview:
DESCRIPTION
TRANSCRIPT
1
Fabrication Facilities Jotne Kråkerøy
Jotne Kråkerøy Fabrication Yard - Fredrikstad
2
Jotne Kråkerøy Fabrication Yard
3
Jotne Eiendom Property
Jotne Kråkerøy Area
4
Fabrication Hall 3
Dry-Dock
Module Deck
Load-out Area
5
Assembly and Fabrication Hall III
Hall ll: 1600 m² 2 x 35
Hall lll: 4500 m² 2 x 50
1 x 10
Cranes at Quay no.4: 1 x 50
Dry Dock
Area Crane Capacity (T)
Length 288 m
Width 40 m
Depth(gate) 7 m
Depth (water) 9 m Cranes at Dock Side 1 x 127 T
1 x 50 T
Hall no. III with Dry Dock Assembly and Fabrication Hall II
Main Dimensions Fabrication Hall no. 3
6
7
Welding Hall 3
• Length 160 meter
• Width 28 meter
• Heigth 15 meter to crane hook in main part of hall
• Height 18 meter to crane hook in lowered part of the hall -
approx 450 m2
• Certified cranes 2 x 50 tonn
• Main port, heigth 10 meter
• Main port, width 25 meter
• For large constructions the west or east wallports will be lifted off.
Welding hall 3
8
Assembly and testing
9
Erection of complete structures:
• 60 tons max weight from Industriveien • 1200 tons max weight from Hall 3
FAT • Internal pressure tests (Performed up to 1700 bar) • External pressure test up to 100 bar • Hydraulic strain test (Performed up to 300 tons)
Function tests
• System testing according to customer requirements • Shallow water testing at quay side
Loading/unloading and internal transport
1. Unloading
Unloading from ship at quay outside dockport
Transport from quay to east gateway of hall 3 by flat-bed trailer
2. Loading
Alternative 1
Transport from east gateway of hall 3 to dockport by flat-bed trailer
Loading to ship by taklift or from the shipcrane
Alternative 2
Transport from east gateway of hall 3 to moduledeck by flat-bed trailer
Loading to ship by taklift
10
Transport route to module deck
11
Alternative lifting – sea lift. For modules above 130T
Heavy lift from dockport
area – Welding hall 3
12
Heavy lift from module deck area
top related