jaenvirotanks catalogue solutions
Post on 11-Sep-2015
32 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
THE E SOLUTION N PROVIDERS
Design n and d manufacturre e of
THEE OLUTIONSO N ROVIDERSPR
Designn ndand anufactuma ree ofoSTORAGE TANKS FOR ALL PURPOSES
ENCLOSED BUNDED ABOVEGROUND TANKSDOUBLE SKINNED BELOWGROUND TANKS
-
Contents
Aboveground Enclosed Bunded Storage TanksEnvirotank Rectangular 4T64 Range - Envirotank Cylindrical 5T34 Range - Envirotank Rectangular 6With Removable Pitched Roof 7Bio Envirotank 8-9
Belowground Double Skin Storage TanksEnvirotank Cylindrical 10-11
Other Enclosed Bunded Storage TanksGravity Feed Envirotank Rectangular 12Autolube Envirotank Rectangular 13
Open Bunded Storage TanksCylindrical 14Rectangular 15
Vertical Storage TanksOpen Bunded Cylindrical Tanks 16Cylindrical Single Skinned Tanks (Type D on legs/skirt) 17Cylindrical Single Skinned Tanks (Type G flat bottom) 18V2 Range - Cylindrical Enclosed Bunded Storage 19
Horizontal TanksCylindrical Single Skin Storage Tanks 20Rectangular Single Skin Storage Tanks 21
Other TanksSpecialist Tanks 22Galvanised Open Top 23Galvanised Bolted Top 24
AccessoriesLadders (Galvanised) 25Holding Down Straps 25Typical Connections 25Support Cradles Mild Steel 26Fuel Tank Components 27Pumps & Controls 28
Other InformationVolumes, Surface Areas & Conversion Tables 29C.A.D & Manufacturing 30Suitable Storage Products 31
1E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Underground tanksVertical tanksLubeOil tanks
Rectangular tanksBio Fuel Storage tanks
Enviro tanksHorizontal tanks
Aboveground tanksSpecialist tanksOpen Top tanksChemical tanks
-
2CompleteLiquidStorageSolutions
-
3E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Joseph Ash was born in 1824, the son of aBirmingham Chemist. He founded his company in1857 which took an active part in the expansion of theMidlands. In 1864 he joined John Pierce Lacy to formAsh & Lacy. At the start of the new millennium Ash &Lacy were taken over by Hill & Smith Holdings Plc,now the Parent Company.
JA Envirotanks is a trading name within Joseph AshLtd specialising in the mass production ofaboveground enclosed bunded steel tanks and burieddouble skinned steel tanks. The company hasoccupied its current site for over 150 years, alwaysspecialising in tank production with high capacitycranes and specialist welding equipment technology.
More bespoke tanks and fabrications are produced onsite from carbon steels and stainless steels whichinclude conical hoppers, chemical and process tankswith specialised linings and ladders, platforms,stairways and frames. All steelwork is galvanised bythe sister company Joseph Ash Galvanising. JosephAsh is also one of the largest galvanising operations inEurope which includes many galvanising plants withinthe UK.
The patented ENVIROTANK product range ismanufactured in Birmingham which includes enclosedbunded rectangular and cylindrical tanks which complywith The Control of Pollution Regulations and arelicensed to OFTEC standard OFS T200.
JA Envirotanks products are suitable for all fuelsincluding specially engineered tanks for the storage ofthe latest formulated bio fuels with heaters andspecialist coatings.
JA Envirotanks produce tanks with a designed life of20 years to meet the needs of aggressive commercialand industrial environments.
Located at the hub of the UK motorway network JAEnvirotanks can despatch, deliver and offload at anymainland location or port.
-
4Aboveground EnclosedBunded Storage Tanks
Above
gro
und
Enclo
sed B
unded S
tora
ge T
anks
UK Patent No: 2 251 021
The ENVIROTANK is a primary storage tank, externally encased within an outer weatherproof bund to ensureany leakage or nominal overfill situation is safely contained.
The ENVIROTANK is easily transportable as a one-piece unit and reduces costly and time consuming site work.
The ENVIROTANK is delivered by JA Envirotanks transport to the customers premises. If at a later date a newsite for the ENVIROTANK is required it only has to be emptied of contents, cleaned internally, uplifted andtransported to its new location.
Outer bund designed to contain 110% of the inner tank volume.Inner tank manufactured to BS799 Part 5 from Steel plate to BS EN 10 025:2004:S275.
Compliance with the control of pollution regulations.Inner tank and outer bund pressure tested.
Envirotank RectangularE61A 2273 1753 1190 1220 1118E62A 2727 2104 1190 1220 1270E63 2841 2192 1190 1220 1296E64 2954 2274 1190 1220 1348E65 3409 2631 1190 1220 1500E66 3636 2806 1190 1220 1576E67A 4546 3080 1470 1220 1800E70 5682 3845 1470 1220 2102E71A 6819 3745 1470 1500 2408E72 7955 2704 1800 1830 2510E74A 9091 3035 2408 1500 2816E75A 11364 3790 2408 1500 3278E76A 13637 4540 2408 1500 3854E78 18183 3696 3008 1830 4486E79 22729 4610 3008 1830 5506E80 27275 5532 3008 1830 6102E81 31821 6454 3008 1830 6694E82 36367 7376 3008 1830 7550E83 40913 8298 3008 1830 8282E84 45459 9220 3008 1830 9524E85 54550 11064 3008 1830 10150E60 80000 10261 3008 3048 14000E99 90000 11545 3008 3048 15479E86 100000 12830 3008 3048 16918E99 110000 11780 3008 3650 17905E87 120000 12870 3008 3650 19295E88 140000 12500 3618 3650 22445E89 180000 14850 3960 3600 27000E90 200000 16500 3960 3600 30212E91 220000 18150 3960 3600 33500
Ref Capacity Length Width Height WeightLitres (Excl cabinet)mm mm mm (Approx)Kg
-
5E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
T64 Range
Envirotank Cylindrical
Enclosed bunded tank Space saving (smaller footprint) Reduced maintenance costs Weatherproof (Tank & Bund Enclosed) Cuts costly site work Needs only suitable level hard standing Overfilled product can be re-used Easily transportable Sizes/capacity to suit most situations Finished in green or black oil resistant paint Clients own in-house colours can be
accommodated on request Offloading and positioning facilities available
if required The optional security cabinet will extend the
overall length of the unit by 750mm.
T56 5000 3610 1500 2 1449T57 7000 3120 1900 2 1773T58 10000 4400 1900 2 2281T59 12000 5260 1900 2 2621T60 15000 3980 2500 2 3190T61 20000 5230 2500 2 3870T62 25000 6470 2500 3 4653T63 30000 7715 2500 3 5320T64 35000 8955 2500 4 6490T65 40000 10163 2500 4 6800T66 45000 11570 2500 5 7960T67 50000 12648 2500 5 8502T68 55000 14090 2500 6 9529T69 60000 10470 3000 5 10830T70 70000 12100 3000 5 11730T71 80000 13760 3000 5 13043T72 90000 12400 3390 5 13803T73 100000 13750 3390 5 14950T74 120000 16400 3390 6 17600
Ref Capacity Length Nom Dia Cradles WeightLitres mm mm (Approx)Kg
Advantages
50, 65 or 80mm fill pipe c/w valves, tankercoupling and cap
Venting assembly sized to suit Sludge drain pipe 40mm outlet pipe with valve Electric bund monitoring with alarm Contents guage in litres Overfill alarm and/or overfill prevention valve Dipstick, dip pipe, cap and chain Dispensing pumps with safety break couplings
and automatic nozzle (3m hose supplied) Fuel monitoring systems Optional galvanised ladder and platform Optional distribution board and lighting Optional security cabinet with aluminium roller
shutter door and steel doors.
Additional Fittings
Galvanised ladder andplatform (optional)
Multi compartment tanks available.Maximum size up to 120,000 litres on request.(ie for Diesel/Gas oil/Lube oil)
Open Mesh or Durbar Plate Flooring
Lockable Security Hatch CoveringCritical Connections
Above
gro
und
Enclo
sed B
unded S
tora
ge T
anks
Benefits:-Cylindrical Tanks due to their shape
free up more useable volume from thetank. Un-restricted access inside the
tank for cleaning and inspection.Specialised linings can be applied
internally (i.e. for aircraft fuels) Greater external surface areais visible for inspection and
future maintenance.
UK Patent No: 2 251 021
-
6T34 Range
Envirotank RectangularT30 2000 1180 1100 1830 865T31 3000 1660 1180 1830 1027T32 5000 2260 1460 1830 1531T33 7000 2520 1790 1830 1940T34 10000 3590 1790 1830 2540T35 15000 4020 2398 1830 3395T36 20000 5360 2398 1830 4285T37 25000 6700 2398 1830 5162T38 30000 6410 3008 1830 5828T39 40000 8550 3008 1830 7474T40 50000 10690 3008 1830 8947T41 60000 10660 3618 1830 9707T42 70000 12440 3618 1830 11790T43 80000 14220 3618 1830 13316
Ref Capacity Length Width Height WeightLitres mm mm mm (Approx)Kg
Above
gro
und
Enclo
sed B
unded S
tora
ge T
anks
The ENVIROTANK is an inner storagetank, externally encased within an outerweatherproof bund to ensure anyleakage or nominal overfill situation issafely contained.
The ENVIROTANK is easilytransportable as a one-piece unit andreduces costly and time consuming sitework.
The ENVIROTANK is delivered by JAEnvirotanks transport to the customerspremises. If at a later date a new sitefor the ENVIROTANK is required it hasonly to be emptied of contents, cleanedinternally, uplifted and transported to itsnew location.
Lockable Security Hatch CoveringCritical Connections
Galvanised ladder andplatform (optional)
UK Patent No: 2 251 021
-
7E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Enclosed bunded tank Space saving (smaller footprint) Reduced maintenance costs Weatherproof (Tank & Bund Enclosed) Cuts costly site work Needs only suitable level hard standing Overfilled product can be re-used Easily transportable Sizes/capacity to suit most situations Finished in green or black oil resistant paint Clients own in-house colours can be
accommodated on request Offloading and positioning facilities available
if required The optional security cabinet will extend the
overall length of the unit by 750mm.
Envirotank SafeS30 2000 1180 1100 1830 1136S31 3000 1660 1180 1830 1344S32 5000 2170 1485 1830 1954S33 7000 2520 1790 1830 2448S34 10000 3590 1790 1830 3171S35 15000 4020 2398 1830 4195S36 20000 5360 2398 1830 5267S37 25000 6700 2398 1830 6326S38 30000 6410 3008 1830 7102S39 40000 8550 3008 1830 9075S40 50000 10690 3008 1830 10876S41 60000 10660 3618 1830 11825S42 70000 12440 3618 1830 14201S43 80000 14220 3618 1830 16023
Ref Capacity Length Width Height WeightLitres mm mm mm (Approx)Kg
Advantages
50, 65 or 80mm fill pipe c/w valves, tankercoupling and cap
Venting assembly sized to suit Sludge drain pipe 40mm outlet pipe with valve Electric bund monitoring with alarm Contents guage in litres Overfill alarm and/or overfill prevention valve Dipstick, dip pipe, cap and chain Dispensing pumps with safety break couplings
and automatic nozzle (3m hose supplied) Fuel monitoring systems Optional galvanised ladder and platform Optional distribution board and lighting Optional security cabinet with aluminium roller
shutter door and steel doors.
Additional Fittings
Above
gro
und
Enclo
sed B
unded S
tora
ge T
anks
BenefitsEnclosed Bunded Storage Tank with
Secondary Removable Pitched Roof for Total security
The ENVIROTANK SAFE is an inner storage tank, externally encasedwithin an outer weatherproof bund to ensure any leakage or nominaloverfill situation is safely contained.
The top connections, pipework and manway are enclosed by asecondary roof section for total security.
The ENVIROTANK SAFE is easily transportable as a one-piece unitand reduces costly and time consuming site work.
The ENVIROTANK SAFE is delivered by JA Envirotanks transport tothe customers premises. If at a later date a new site for theENVIROTANK SAFE is required it has only to be emptied of contents,cleaned internally, uplifted and transported to its new location.
Outer bund designed to contain 110% of the inner tank volume,manufactured to BS799 Part 5 from Steel plate to BS EN 10025:2004:S275.Compliance with the control of pollution regulations.Inner tank and outer bund pressure tested.
450mm
1,830mm
Padlockableaccess hatch
Padlockablesteel doors
UK Patent No: 2 251 021
-
8Above
gro
und
Bio
-Envi
rota
nk
Bio-EnvirotankRef Capacity Length Width Height Weight
Litres mm mm mm (Approx)Kg
BE1BE2BE3BE4BE5BE6BE7BE8BE9BE10BE11BE12BE13BE14
250050007500
1000015000200003000040000500007000090000
120000140000180000
1410261037603310508055606740716488649626
12276154761607617905
14601460146020102010241024103030303030083008316031603600
20002000200020002000200024002400240030483048304834003400
13722202293733064680555773729025
108391570219438242492648430700
A unique design (Pat App 2 477 266) comprising a primary storagetank without internal structure to enable ease of internal inspection andcleaning. The base of the tank has a sloping hopper style bottom to asump, the sump being serviced by a 25mm sludge drain pipeaccessible from the tank top.
The concept with correctly positioned manway inspection pointsallows tank cleaning without man entry reducing the need for confinedspace entry health and safety procedures.
The primary tank is enclosed by an outer steel bund that fully complieswith the control of pollution regulations, the bund holding the innertank capacity plus 10% (110% containment).
The tank can be split into compartments for gas oil/diesel/oils/Adbluand process liquids. Internal tank linings can easily be applied due tothe unrestrictive internal tank construction.
External manways and connections are enclosed within a steel securehatch which is padlockable to prevent tampering.
End or side mounted security cabinets can be fitted including steel orroller shutter doors and integral spillage trays, to house pipework,pumps, gauging, alarms and controls.
Designed life 20 years.
Inner tank and outer bund pressure tested.
Design for the FutureWith developing Bio-fuels water contentand bacterial growth is becoming more ofan issue in tanks; regular tank cleaning andinspections are now necessary.
Entering tanks presents health and safetyconcerns and by constructing a tank withfree internal space (no cross stays) makesentry and egress easier and safer. Accessand retrieval of remotely controlled cleaningtechnologies (non man entry systems) isalso more practical with Bio-Envirotanks.
The incorporation of sloping bases andsumps helps reduce the frequency ofcleaning as water and contaminants willeasily drain into the sump. Residues areextracted via the sludge drain pipe whichruns from the tank top to the sump.
Bio-EnvirotankRectangular AbovegroundEnclosed Bunded StorageTanks (Inner tank externallystiffened and with a slopinghopper style bottom)
-
9E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Enclosed bunded tank design Reduced maintenance costs Needs only suitable level hardstanding for siting Easily transportable Lifting eyes for offloading Overfilled product can be reused Fill pipe sizes 50mm/65mm/80mm complete
with isolation valve Tanker coupling and cap and chain Venting systems to suit fill size 25mm desludge pipe to sump 50mm outlet pipe for gravity feed or top suction 50mm and 80mm overfill prevention valves
available to shut off the tanker fill when theprimary tank reaches capacity
Electronic low level and overfill alarm units Electronic bund warning alarm units Transfer pump sets available to feed boilers and
generators Dispensing pumps available with automatic
nozzles Fuel monitoring systems fitted to suit customer
needs.
Features
Above
gro
und
Bio
-Envi
rota
nk
Specialist Features (optional)
50mm/65mm/80mm vent dryers tominimise moisture and condensation
Internal linings to keep fuel sterile andprevent corrosion
Stainless steel pipework and fittings. Specialist filters including magnetic filter
technology in order to reduce bacteria inthe tank bottom.
Optional Bolt onPitched Roof tosecure all TopPipework & Tank Entries
Cabinet with aluminiumroller shutter door
(optional)
Lockable security hatchover manway andcritical connections
Outer Bund
Internal suction pipe
Internal desludgepipe to sump
Universalbeam bearers
450mmdiameter sump
Inner tank withhopper base to sump
Gauge
Fill Pipe
Pumping options
Overflow prevention device
AlarmPanel
Ladder & walkway (optional)
HeatingLow pressure hot water and steam coils can be built into the tankbottom if needed or electrically powered submersion heaters.All heating can be provided with temperature sensors and controlthermostats.
Lagging and cladding can be added to the outside of the unit forheating efficiency.
Gauging Hydrostatic gauges in litres Electronic gauges in litres Differential and level measurement systems for closed vent tanks Water monitor indicators are available with electronic gauges
ElectricalLighting, wiring and distribution boards with isolators to suitequipment fitted.
Heating Options Low pressure hot water coils Steam coils Immersion/submersion heaters Lagging and cladding to minimise heat losses
Cabinets Side cabinets and end cabinets Roller shutter doors or steel hinged doors
Access Vertical caged ladders and walkways Ships ladder and walkways Stairway to walkway All galvanised finish with open mesh or chequer plate flooring
-
10
Belo
wgro
und
Double
Skin
Sto
rage T
anks
Belowground Double SkinStorage Tanks
Holding down straps with ratchet tensioners Content gauges Dipsticks Overfill prevention valve with or without offset fill adapters Internal fill pipes Internal suction pipes Leak detection device (intrinsically safe) complete with reservoir,
alarm unit, relay and probe Installation kit for leak detection device Four litre container of leak detection fluid for filling reservoir on site Manway flanges for connection GRP access chambers.
Advantages
Additional Fittings
Continuous monitoring for total environmental protection Product stocks are safely contained Tank continuously under test throughout its life Tanks can be encased in a suitable granular or concrete back fill Multi compartment tanks are available to customers requirements Simplicity of design reduces costly site time Design approved by leading oil companies Manufactured at our Birmingham facility ideally suited on the hub
of the UK motorway network Accurate gauging systems available (magnetostrictive and
ultrastronic).
The Belowground ENVIROTANK is the latest conceptin the containment of hazardous fuels and chemicals,offering continuous protection to the surroundingenvironment. With its unique Leak Monitoring Systemthe ENVIROTANK will warn you if failure should occurwithout any loss of product.
The ENVIROTANK is produced from Certified CarbonSteel for strength and protected externally with twocoats of black bitumen or a tough corrosion resistantpolyurethane coating, spark tested prior to despatch.The cavity between the inner and outer skin is filled atour works with specialised leak fluid and sealed priorto despatch. Designed for 98% containment ofproduct and can be supplied with overfill preventionvalves if required. The inner tank and outer skin arepressure tested at our works and certificates issued.The ENVIROTANK is normally delivered by our ownfleet of vehicles in order to ensure delivery schedulesare maintained. Since being established in 1857 J AEnvirotanks are one of the leading suppliers to thePetroleum industry.
Our design is similar to storage tanks installed inEurope for the last 20 years. Manufactured to BS EN12285-1:2003. From Steel plate to BS EN 10 025:2004: S275
Compliance with the control of pollution regulations.
Cable joint to fieldconnections
Fill pipe
Vent pipe Manwayflange
Overfillprevention valve(Schematic)
Suction pipe
Leak detectorprobe
For high water-tables,install reservoir outsideManway Chamber Fluid reservoir
(Zone 0 certified)
Alarm panel(with BMS contacts)
Fluid ventconnection
For concrete infilltank to rest onfoundation slab
2 layers of a 193 meshreinforcement
(Schematic)Install OPVs tomanufacturersinstruction
Tank Lashwoven nylonstraps
Pea shingle, dry sandor concrete infill
-
11E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Belo
wgro
und
Double
Skin
Sto
rage T
anks
Envirotank CylindricalRef Capacity O/A Length Inside Dia O/A Length Outer Dia Weight
Litres (inner tank)mm (inner tank)mm (outer tank)mm (outer skin)mm (Approx)Kg
EU01EU02EU03EU04EU05EU06EU07EU08EU09EU10EU11EU12EU13EU14EU15EU16EU17EU18EU19EU20EU21EU22EU23EU24EU25EU26EU27EU28EU29EU30EU31EU32EU33EU34EU35EU36EU37EU38EU39EU40EU41EU42EU43EU44EU45
2,0005,0007,00010,00012,00013,63713,63715,00018,18418,18420,00022,72922,72925,00025,00027,27527,27530,00030,00031,82131,82135,00036,36836,36840,00040,00040,91340,91345,45945,45950,00050,00054,55154,55155,00060,00060,00068,18968,18970,00080,00090,000100,000120,000130,000
1,4043,2352,8033,9704,7252,7083,1805,9003,5154,1534,6104,2685,0805,6704,7705,0306,0456,8105,6705,7917,0057,6786,5537,9688,6567,2397,3158,8488,0529,80210,7549,1909,75411,70911,80312,85310,99012,16814,57110,07411,60713,14214,67617,74414,916
1,5001,5001,9001,9001,9002,7432,5001,9002,7432,5002,5002,7432,5002,5002,7432,7432,5002,5002,7432,7432,5002,5002,7432,5002,5002,7432,7432,5002,7432,5002,5002,7432,7432,5002,5002,5002,7432,7432,5002,9862,9862,9862,9862,9863,350
1416325028153985474027203192591535274165462542805092568547855042605468255685580370177690656579808668725173278860806498141076692059766117211181512865110051218014583100861161913154146881775614928
153015301930193019302773253019302773253025302773253025302773277325302530277327732530253027732530253027732773253027732530253027732773253025302530277327732530301230123012301230123384
90012001900210026002800280030003375337537004100410044004400467046705300530053805380605058305830670067006750675072007200815081508510851086509700970010410104108795992911065122001447015996
-
12
Gra
vity
Feed
Enclo
sed B
unded S
tora
ge T
anks
The most cost effective and environmentally safe way of storing anddispensing gas, oil, diesel and kerosene. Ideal for fuelling plant atbuilding sites and smaller transport operations.
The Gravity Envirotank can also be coupled into small standbygenerator and boiler installations.
The Envirotanks compact design allows it to take up the minimum ofspace. Being a totally self contained, ready-to-use sealed unit, makesit easily movable when empty and gives low maintenance as norainwater can enter the bunded area.
The bund is designed to contain 110% of the primary tank volume.Manufactured generally to BS 799 Part 5 Type J 2010. From Steelplate to BS EN 10 025: 2004: S275
Compliance with the control of pollution regulations.
Gravity Feed EnvirotankRectangular EnclosedBunded Storage Tanks
Outer skin designed to contain 110% ofinner tank volume.
Notes
One coat of zinc phosphate primer, one coatof green oil resistant paint.
FinishOptions
Ball valve, hose and nozzle can be suppliedif a flow meter is not required.
D01 1364 1750 1170 1220 814 3D02 2273 2350 1170 1220 986 3D03 2727 2670 1170 1220 1024 3D04 3636 3300 1170 1220 1323 3D05 4546 3950 1170 1220 1515 3D06 5682 4750 1170 1220 1740 3D07 6819 3850 1474 1500 1846 3D08 9091 4865 1474 1500 2273 3
Ref Capacity Length Width Height Weight Thickness Litres mm mm mm (Approx)Kg mm
A built in end security cabinet. A standard feature.
Tank and Bund Bolt together
Access step
800
300
1450
100
750
HE
IGH
T
TANK ELEVATED FOR GRAVITY FEED
TANK ELEVATED USING BUND STRUCTURE
-
13E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Electric oil dispersing pump complete with flowmeter, hose and nozzle. Suitable for a 240V,50Hz, single phase electricity supply, (pulseoutput optional if connection to a fuelmanagement system is required)
Waste oil tank with sump and extractor pipe.
Options
Lubricator on air operated pumps filledwith anti-freeze for external use,recommended air inlet pressure 90lb/in2
Pulse transducers and solenoid valves canbe fitted for connection to fuelmonitoring/management systems.
Notes
One coat of zinc phosphate primer, one coat ofgreen oil resistant paint.
Finish
Auto
lube
Enclo
sed B
unded S
tora
ge T
anks
AutolubeEnvirotankRectangularEnclosed BundedStorage Tanks
D09 938 1524 610 1219 375 3D10 1063 1727 610 1219 398 3D11 1266 2050 610 1219 452 3D12 1730 1376 1210 1245 491 3D13 2558 2031 1210 1245 651 3D14 4242 2815 1210 1500 891 3D15 2110 1691 1210 1245 590 3D16 2354 1869 1210 1245 640 3
Ref Capacity Length Width Height Weight Thickness Litres mm mm mm (Approx)Kg mm
The latest technology in the storage of lubricating, gear andhydraulic oils, etc.
Autolube Envirotank is one of the most environmentallysafe ways of storing most workshop fluids. Specificallydesigned with slimline dimensions to fit into the smallest ofworkshop areas.
The Autolube Envirotank can also be sited externally withvery little maintenance as being a sealed unit no rainwatercan enter the bunded area.
Various fittings are available to suit your requirements, so theAutolube Envirotank can be delivered to site ready to use.
Outer skin designed to contain 110% of the inner tankvolume. Manufactured generally to BS 799 Part 5 Type J2010. From Steel plate to BS EN 10 025: 2004: S 275
Compliance with the control of pollution regulations.
Inner tank and outer bund pressure tested.
Air pump
Manway cover
40mm full socketc/w plug (spare)
Oil resistantrubber hose
Hose reel(Spring return type)bracketed to tankwith 8 metres of hose
50mm vent
Drain
50mm fill assemblywith cap and chain
Contents gauge
Two lifting lugs
R.S.C. supports stitchwelded to base
Commercial rose endmeter or precision hoseend for resale
UK Patent No: 2 251 021
Vent assembly
-
14
Cylindrical
Bunded Storage Tanks
B31B32B34B35B36B37B38B39B40B41B42B43B44B45B46B47
1545 x 1500 2895 x 15003575 x 19004415 x 19005255 x 19004325 x 24865305 x 24865029 x 27435791 x 27436502 x 27437315 x 27438051 x 27439754 x 2743
10262 x 300011225 x 300013564 x 3000
2438 x 2110 x 5103658 x 2110 x 6804190 x 2743 x 9145235 x 2743 x 9146285 x 2743 x 914
5075 x 3048 x 15006055 x 3048 x 15005791 x 3484 x 15006813 x 3658 x 15007432 x 3658 x 15008362 x 3658 x 15009136 x 3658 x 1500
10839 x 3658 x 150010973 x 3658 x 182911938 x 3658 x 189014326 x 3658 x 1981
2222222222334445
6666666666666666
6666666666666666
227045469091
11364136371818822729272753182136367409134545954551681897500090918
117019402910357036604540541060006650746082008790
10000118101300115739
Ref Tank Size Tank Thk Cradles Capacity Bund Size Bund Thk Weight(L xDia) mm mm Litres (LxWxH)mm mm (Approx)Kg
Bunded S
tora
ge T
anks
Time consuming site construction work for the installation of tanksto store diesel fuel, white spirit and other semi-hazardous liquids isno longer a problem.
A tank within a tank or Bunded Tank by the Birminghamspecialists, J A Envirotanks needs only a suitable hard standing. Ithas the very useful additional advantage of being portable from siteto site.
This tank is available in a range of sizes from 1,000 litres up to100,000 litres. The outer Bund tank normally has a capacity of110% compared with the inner tank to ensure any leakage is safelycontained.
The complete package comprises the storage tank, fitted inside itsBund tank, all ancillary pipework, valves, contents gauge, caps andlifting lugs. A dispensing pump and fuel monitoring equipmentcan also be fitted, if required, with all pipework connectedand wired to the isolating switch. After connection to amains supply the package is ready for use.
Fabricated from mild steel plate the tanks areprotected by a zinc phosphate alkyd primerand a coat of gloss finish paint forweatherproofing.
J A Envirotanks deliver the completepackage as a unit to the customerspremises. If, at a later date, a new site forthe Bunded tank is required it only has tobe emptied of liquid, lifted onto a truckand transported to its new location.
Bund designed to contain 110% of theinner tank volume. Manufactured to BS799Part 5 2010 from steel plate to BS EN 10025: 2004: S275. Compliance with thecontrol of pollution regulations.
Galvanised ladder and platform optional
Lift lugs
Inner tank to BS 799 Part 5Type A & EN 12285-2
-
15E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
B01B01AB02B03B03AB04B04AB05B05AB06B06AB07B07AB08B09B10B11B12B13B14
1829 x 1219 x 12191829 x 1219 x 12192438 x 1219 x 15003048 x 1219 x 15003048 x 1219 x 15003048 x 1500 x 15003048 x 1500 x 15003048 x 1219 x 24383048 x 1219 x 24383048 x 1500 x 24383048 x 1500 x 24383048 x 1828 x 24383048 x 1828 x 24383048 x 2438 x 24383962 x 2438 x 24384572 x 2438 x 24385486 x 2438 x 24386096 x 2438 x 24386096 x 2438 x 27436096 x 2438 x 3048
2438 x 1828 x 6862438 x 1828 x 6863048 x 1828 x 9143657 x 1828 x 9143657 x 1828 x 9143657 x 2311 x 9143657 x 2311 x 914
3962 x 2133 x 12193962 x 2133 x 12194191 x 2438 x 12194191 x 2438 x 12193657 x 2787 x 15003657 x 2787 x 15003657 x 3561 x 15004876 x 3484 x 15005486 x 3352 x 16766400 x 3352 x 16767010 x 3352 x 17017315 x 3352 x 18297315 x 3352 x 1981
53555556565656666666
55565656565656666666
272727274457557355736858685890919091
1114611146136371363718183227292727531821363674091345459
1050910
150018001500215018002880250034903090382033204420553060906920742085009230
Ref Tank Size Tank Thk Capacity Bund Size Bund Thk Weight(LxWxH)mm mm Litres (Brimful) (LxWxH)mm mm (Approx)Kg
Optional Equipment
Bunded S
tora
ge T
anks
Rectangular
50mm/65mm/80mm diameter fill pipe withvalve and brass cap
Vent complete with bird guard 25mm diameter sludge complete with valve
and plug 40mm diameter draw off complete with valve Hydrostatic contents gauge complete with
capillary tube and bracketed to the bund tank New commercial high speed pump with 12
months warranty Low duty pump suitable for fork trucks, etc., or
one high-speed new pump complete with fuelmonitoring equipment recording the fuelallocated to each vehicle 25 fobs
Flowmeter fitted with manual nozzle (elevatedtanks only) suitable for fork trucks
All electric pumps wired to firemans switchmounted on bund. All pumps supplied withautomatic cut off nozzle
Access ladder and platform in galvanised finish Cabinet with lockable doors (optional) cabinet
will extend the overall length by 750mm.
Lifting lugs
One coat of zinc phosphate primer, onecoat of green oil resistant paint
Inner tank manufactured generally to BS799 Part 5 Type J
Screwed or Flanged connections available Pipe work fitted to suit application Compliance with CoP regulations Outer bund to contain the capacity of the
inner tank plus 10% Inner tank pressure tested Bund tested sound.
-
16
Vert
ical
Cyl
indri
cal
Bunded S
tora
ge T
anks
Tank and Bund from 6mm thick mild steel plate
B61B62B64B65B66B67B68
B69B70B71B72B73B74B75B76B77B78
1500 x 15451500 x 28951900 x 35902486 x 29052486 x 34002743 x 33523000 x 3505
2743 x 50292743 x 64772743 x 80512743 x 9753
3000 x 102612743 x 64772743 x 80512743 x 9753
3000 x 102613000 x 11227
1981 x 1981 x 6861981 x 1981 x 13902438 x 2438 x 17752935 x 2935 x 15242935 x 2935 x 18283200 x 3200 x 19813657 x 3505 x 1981
4114 x 3656 x 19813810 x 3656 x 28964724 x 3656 x 28965638 x 3656 x 28965638 x 3656 x 36567010 x 3656 x 19818382 x 3656 x 19819753 x 3656 x 1981
12115 x 3656 x 198112115 x 3656 x 2200
1111111
1111122222
227045459120
11364136381818322730
27275363684545054551681897273590919
109103136379150000
Ref Inner Tank No of Capacity Bund Size(DiaxH)mm Tanks Litres (LxWxH)mm
All the above tanks are transported as one piece units (B61-B68)
All the above tanks are transported as seperate units to be bolted together at site (B69-B77)
Additional Fittings
50mm/65mm/80mm diameter fill pipewith valve and brass cap
Vent complete with bird guard 25mm diameter sludge complete with
valve and plug 40mm diameter draw off complete with
valve Hydrostatic contents gauge complete
with capillary tube and bracketed to thebund tank
Pumps available to suit application
One coat of zinc phosphate primer, onecoat of green oil resistant paint
Inner tank manufactured generally to BS799 Part 5 Type G
Side manway available on inner tank only
Screwed or Flanged connectionsavailable
Pipe work fitted to suit application
Compliance with CoP regulations
Outer bund to contain the capacity of theinner tank plus 10%
Access ladders, platforms, steelwork &periphery hand railing available
Inner tank pressure tested
Bund tested sound.
Non returnvalve fitted
Lift lugs
Vertical BundedCylindrical Tanks
-
17E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Vertical SingleSkin CylindricalStorage Tanks
Vert
ical
Cyl
indri
cal
Sin
gle
Skin
Sto
rage T
anks
V01 2273 1.528 1.494 6 460V02 2841 1.867 1.494 6 530V03 3409 2.207 1.494 6 630V04 4546 2.889 1.494 6 790V05 5682 3.569 1.494 6 960V08 9092 3.547 1.900 6 1230V10 11365 4.389 1.900 6 1480V13 13638 5.230 1.900 6 1750V15 18184 4.320 2.486 6 1970V17 22730 5.303 2.486 6 2370V20 27275 6.286 2.486 6 2780V21 31821 7.270 2.486 6 2860V22 36367 8.253 2.486 6 3350V23 40913 6.600 2.986 6 3690V24 45459 7.281 2.986 6 3950V25 54551 8.390 2.986 6 4720V26 68189 10.262 2.986 6 5430V27 90918 13.654 2.986 6 6850V28 100010 14.935 2.986 6 7044V29 113647 16.926 2.986 6 7924V30 136377 11.735 4.000 8 11500
Ref Capacity Height Internal Dia Shell Thk WeightLitres metres metres mm (Approx)Kg
Type D
Manufactured in accordance with BS799: Part 5: Type D
All welded seams
Certified tested
Fitted with 600mm dia. Manhole with setpinned cover and gasket
Standard connections include two65mm, one 40mm and one 25mmscrewed sockets(flanged connections optional)
Finished one coat of primer/gloss finish,or to customers requirements
Steel plate to BS EN 10 025: 2004: S275
Access ladders, platforms, steelwork &periphery hand railing available.
Mounted on Steel Skirt Mounted on Legs
-
18
Vert
ical
Cyl
indri
cal
Fla
t B
ott
om
ed S
tora
ge T
anks Vertical Single Skin
Flat Bottomed CylindricalStorage Tanks
Manufactured in accordance with BS 799:Part 5: Type G or BS EN 14015
All welded seams
Certified tested
Fitted with 600mm dia. Manhole with setpinned cover and gasket
Standard connections include two 65mm,one 40mm and one 25mm screwedsockets
Finished one coat of primer/gloss finish,or to customers requirements
Steel plate to BS EN 10 025: 2004: S275.
V01 2273 1.528 1.494 6 460V02 2841 1.867 1.494 6 530V03 3409 2.207 1.494 6 630V04 4546 2.889 1.494 6 790V05 5682 3.569 1.494 6 960V08 9092 3.547 1.900 6 1230V10 11365 4.389 1.900 6 1480V13 13638 5.230 1.900 6 1750V15 18184 4.320 2.486 6 1970V17 22730 5.303 2.486 6 2370V20 27275 6.286 2.486 6 2780V21 31821 7.270 2.486 6 2860V22 36367 8.253 2.486 6 3350V23 40913 6.600 2.986 6 3690V24 45459 7.281 2.986 6 3950V25 54551 8.390 2.986 6 4720V26 68189 10.262 2.986 6 5430V27 90918 13.654 2.986 6 6850V28 100010 14.935 2.986 6 7044V29 113647 16.926 2.986 6 7924V30 136377 11.735 4.000 8 11500
Ref Capacity Height Internal Dia Shell Thk Base Thk WeightLitres metres metres mm mm (Approx)Kg
Type G
6666666688888
1010101010101010
Flat Bottom
Dished Top BS 799 Pt5Type G
Lifting lugs
Conical TopBS EN 14015
High load DPCmembranerecommendedbetween tank base &concrete foundation
-
19E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Cylindrical
VerticalEnclosedBundedStorage Tanks
Vert
ical
Cyl
indri
cal
Enclo
sed B
unded S
tora
ge T
anks
V2 Range
V201V202V203V204V205V206V207V208V209V210V211V212V213V214V215V216V217
10000 15000 20000 25000 30000 35000 40000 50000 60000 70000 80000 90000
100000 110000 120000 130000 140000
4290402552156405759571808150
1010010160117909970
111701237013570114401236013280
68888
101010101010101010101010
55555555556666666
66666666668888888
19002500250025002500274327432743300030003500350035003500400040004000
282537394573527560566700739387829757
1102613863152451662718010180711928020489
Ref Capacity Height Diameter Shell Thk Base Thk WeightLitres mm mm Inner mm Outer mm mm (Approx)Kg
Lifting lugs
Manufactured in accordance with BS 799: Part 5:Type G & BS EN 14015 from steel plate to BS EN10 025: 2004: S275
Compliance with CoP regulations
One coat of zinc phosphate primer, one coat of greenoil resistant paint
Access ladders, platforms, steelwork & periphery handrailing available
Outer bund to contain the capacity of the inner tankplus 10%
Supplied with dished or coned roof
Access ladders, platforms, steelwork & periphery handrailing available
Screwed or Flanged connections available
External & Internal pipe work fitted to suit application
Inner tank and outer bund pressure tested.
High load DPCmembranerecommendedbetween tank base &concrete foundation
-
20
Horizontal Single SkinStorage TanksAbove or Below Ground
Ref Capacity Overall Length Internal Diameter Plate ThicknessLitres metres metres & weight (Approx)Kg
5mm 6mm 7mm
Cyl
indri
cal
Sin
gle
Skin
Sto
rage T
anks
Single, double or multi-compartment tanks
BS 799: Part 5: Type A or Type B alsoBS EN 12285-2
Dished and flanged ends, all weldedseams
Certified tested
Fitted with 600mm dia. manhole with setpinned cover and gasket
Manufactured from steel plate to BS EN 10025: 2004: S275.
H01H02H03H04H05H08H10H13H17H19H22H23H24H25H26H27H36H28H30H31H32H37H33
227328413409454656829091
11364136371818422729272753136736367409134545954551681896818990918
100010113647115000136377
1.7532.0572.4383.2773.3533.5474.3895.2304.3205.3036.2865.7916.4777.3158.0529.754
12.16810.26213.56414.93516.91217.15011.735
1.4941.4941.4941.4941.4941.9001.9001.9002.4862.4862.4862.7432.7432.7432.7432.7432.7432.9862.9862.9862.9862.9864.000
3710380144574915525361247225722591179365
105501069811110
400440520653
457521622787953
122914701749196523682776285133433686394047115419541968387034791480268590
Cylindrical
-
21E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Recta
ngula
r S
ingle
Skin
Sto
rage T
anks
BS 799: Part 5: Type J or K
Internally stayed as necessary
Certified tested
Fitted with 600mm dia. manhole with set pinnedcover and gasket
Standard connections include two 65mm, one40mm and one 25mm screwed sockets
Calibrated dipstick/gauge and other fittings ifrequired
Manufactured from steel plate to BS EN 10 025:2004: S275.
Ref Capacity Length Width Depth Plate ThicknessLitres metres metres metres & weight (Approx)Kg
3mm 5mm 6mm
R00R01R02R03R04R05R06R07R08R09R10R11R12R13R14R15R16R17R18R19R20R21R22R23R24R25
100022722727284129543409363644574545548655736858795590918916
1114713377136371818322729272753182136367409134545954551
1.2001.5241.8291.9051.9812.2862.4382.4383.0482.4383.0483.0482.4383.0482.4383.0483.6583.0483.0483.9623.6584.2674.8775.4866.0966.096
1.2001.2191.2191.2191.2191.2191.2191.5001.2191.5001.5001.5001.8292.4382.4382.4382.4382.4382.4382.4383.0483.0483.0483.0483.0483.048
7001.2191.2191.2191.2191.2191.2191.2191.2191.5001.2191.5001.8291.2191.5001.5001.5001.8292.4382.4382.4382.4382.4382.4382.4383.048
180305343343356394423470495495559
432483495508572598686686711812914965
1127
559635648674750788901940940
1051120412551476140816391927182522432753305133473775414147625075
Rectangular
Standard Connections
Inclusive of B.S.P screwed bosses to BS 21 Aboveground tanks finished in two coats of
primer or one coat zinc alkyd primer and onecoat of oil resistant gloss finish
Alternatively finished to customersrequirements
Calibrated dipstick, gauge, alarm and otherfittings if required.
-
22
Specia
list
Fabri
cati
ons
Special Tanks
J A Envirotanks specialise in bespokefabricated Vats, Tanks, Silos, Hoppers &Steelwork to meet your specific project needs
We Manufacture in Carbon Steel and StainlessSteel (316/304)
Certain size tanks & structures can be hotDipped Galvanised to BS EN 1461 at one ofour many Galvanising plants
All welded steel itemscan be grit blasted &painted externally& internally lined to suitspecific requirements.
-
23E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Galv
anis
ed O
pen T
op T
anks
GalvanisedOpen TopTanks BS 417: Grade A
All welded and reinforced tops, cornerplates and stayed as necessary
Galvanised after manufacture inaccordance with BS EN 1461
Sockets, stooled flanges and lifting lugscan be supplied
Painted internally for Potable & Greywater if required
Hot dip galvanising is carried out at atemperature of 450 oC and the resultantzinc coating becomes an integral part ofthe steel that it protects.
Galvanising:-Size, weight, shape, thickness and radius are all factors to beconsidered in design for galvanising to minimise distortion.
Ref Capacity Length Width Depth Capacity at Plate Cover WeightLitres mm mm mm Waterline Thick Thick (incl cover)
Litres mm mm (Approx)Kg
G01G02G03G04G05G06G07G08G09G10G11G12G13G14G15G16G17G18G19G20G21G22G23G24G25G26G27G28G29
4590
110135180230270320360450570680910
113016002270272036404458557368589090
11147133771783522279267603182034090
457610610610686736762914914
1219965
109211681524152418291829243824383048304830483048365848774877487748774877
305406432457508559584610660610762864889914
114312191219121915001500150024382438243824383048365836583658
305381432482508559610584610610787736889813914
10161219121912191219150012191500150015001500150018291981
18546886
114159191227264327423491709841
122717272137266433014116596272009289
111481426817838211762614830694
1.61.61.61.61.6
22222
2.52.52.52.5
333555555666666
.91
.91
.91
.91
.91
.91
.91
.91
.911.21.21.21.61.61.61.61.61.61.61.61.6
22222222
132023263035404548547886
104120184241272498560683852964
1071164418242090234526002730
-
24
Galv
anis
ed B
olt
ed T
op T
anks
Galvanised Bolted Topand Welded Top Tanks
Ref Capacity Length Width Depth Capacity at Plate Cover WeightLitres mm mm mm Waterline Thick Thick (incl cover)
Litres mm mm (Approx)Kg
G51G52G53G54G55G56G57G58G59G60G61G62
450570680910
1,1151,5672,2732,7283,6374,4585,5736,858
1219 610 610965 762 787
1092 864 7371168 889 8891500 914 8131500 1143 9141829 1219 10161829 1219 12192438 1219 12192438 1500 12193048 1500 12193048 1500 1500
327423491709826
1,2071,7272,1372,6643,3014,1165,962
2.02.52.52.53.03.03.03.05.05.05.05.0
2.02.52.52.53.03.03.03.05.05.05.05.0
116143160182210290354385712810965
1080
BS 417: Grade A
All welded and reinforced tops, cornerplates and stayed as necessary
Galvanised after manufacture inaccordance with BS EN 1461
Sockets, stooled flanges and lifting lugscan be supplied
Painted internally for Potable & Greywater if required
Hot dip galvanising is carried out at atemperature of 450 oC and the resultantzinc coating becomes an integral part ofthe steel that it protects.
Galvanising:-The best quality coatings are produced when molten zinccan flow freely over all surfaces, both external and internal.
Vent & Drain holes with free flow pathways are essential atthe design stage.
-
25E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Access
ori
es
AccessoriesTanklash Woven Nylon Straps
Typical Connections
Lashing Kitincludes:1 Anchor strap fitted
with protectivecorners
1 Tension strap withratchet attached
Weight 5 - 6kgs perlashing according totank dia.
Patent Appn. 81.27759
Pull webbingthrough ratchettaking-up all slack
1. To tension Pump handle andtension as tight aspossible. Closeratchet as in fig. 3
2.
Pull webbingthrough ratchettaking-up all slack
3. To release forretensioning
Push handle flatthrough 180o torelease safety catch
4.
The Ratchet Tensioner
Ladders
Galvanised after manufacture inaccordance with BS EN 1461
Hot dip galvanising is carried out at atemperature of 450 oC and the resultantzinc coating becomes an integral part ofthe steel that it protects.
For details to B.S. 10B.S. 4505 etc.
BRANCHConnections can be located
in any position
PAD
Tapped B.S.P.T./B.S.P.P.
SOCKET HALF SOCKET
Studs both sides.Double Pad.
Stud one side.Single pad.
-
26
Cra
dle
s
CradlesMild Steel
6mm
Rad.
Fully welded to tank
Central web in twohalves shaped tosuit saddle plate
BS799: Part 5: 2010Min. Height = 150mm Cradle Form for Tanks
1,000 to 1,700 diameter
Cradle positions Three uprights Five uprights Seven uprights Nine uprights
Cradle Form for Tanks 1,700 to 2,450 diameter
Cradle Form for Tanks 2,450 to 3,050 diameter
Cradle Form for Tanks 3,050 to 4,000 diameter
Widths
J
J - Web Thk2
Ditto
Ditto
J
10mm
6mm
Rad.
Fully welded to tank
10mm
Width
5mm
Depth
Section K - KISO. Detail
Four uprights Six uprights Eight uprights
Cradle Form for Tanks 1,372 to 1,676 diameter
Cradle Form for Tanks 1,829 to 2,438 diameter
Cradle Form for Tanks 2,591 to 2,743 diameter
BS799: Part 5: 2010Min. Height = 150mm
Cradle positions
Steel cradles are used to support horizontalcylindrical storage tanks (single skinned, enclosedbunded and double skinned)
It is normal practise to weld the cradle to the tank
A 1:50 slope is recommended for oil tanks
A 1:30 slope is required for aviation fuel tanks
Finish to match the tank.
Solid Cradles
Formed Cradles
-
27E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Fuel
Tank C
om
ponents
Fuel Tank Components
Silica Gel Vent Dryer
Hydrostatic ContentsGauge in litres
10 Micron WaterParticle Filter
Magnetic FuelConditioner
50mm OverfillPrevention Valve
Adjustable OPVFloat Kit
80mm OverfillPrevention Valve
To shut downfilling pipe whentank has reached
capacity
Overfill & Bund Alarm 230V acor Battery powered(Volt free contacts included) Fill Point Cabinets
Spill Kits
Electronic Gauging withoutputs for BMS
Gauge in litres
-
28
Pum
ps
& C
ontr
ols
Pumps & Controls
Adblue DispensingPump
Hose Reels
Automatic FuelingNozzle
Vertical pump Foot mounted pump
Electrically driven pump Air motor driven pump
Spigot mounted pump
Simplex MeshBasket Filter
Two Product FuelDispensing Pump
MONO FuelDispensing Pump
with High Hose Mast
Standard FuelDispensing Pump
Fuel Management Systems
-
29E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Other InformationVolumes & Surface Areas
Useful Conversions
Oth
er
Info
rmati
on
Metres - Yards 1.0936Metres - Feet 3.2808
Millimetres - Inches 0.0394Yards - Metres 0.9144Feet - Metres 0.3048
Inches - Millimetres 25.40Sq. Metres - Sq. Yards 1.196Sq. Metres - Sq. Feet 10.7639Sq. Yards - Sq. Metres 0.8361Sq. Feet - Sq. Metres 0.0929
To convert Multiply by To convert Multiply by To convert Multiply by
Cu. Metres - Cu. Yards 1.3079Cu. Metres - Cu. Feet 35.3146Cu. Yards - Cu. Metres 0.7645Cu. Feet - Cu. Metres 0.0283
Litres - Gallons 0.2199Litres - Pints 1.7598
Gallons - Litres 4.5459Pints - Litres 0.5682
Tonnes - Tons 0.984Kilos - Pounds 2.2046
Grammes - Ounces 0.0353Tons - Tonnes 1.016
Pounds - Kilos 0.4536Ounces - Grammes 28.3495
p.s.i - bar 0.069Bar - p.s.i 14.50
p.s.i - kN/m2 6.985kN/m2 - p.s.i 0.1432
Cu. Feet - Gallons 6.250C - 0F 1.8 (+ 32)
Rectangle
Area = LBPerimeter = 2L + 2B
L
B
SphereCircle
Cone
Volume = d2 x h4
Surface Area of Cylinder = d x h
Surface Area Ends = d2 x 24
Volume = 4/3 r3Surface Area = 4r2
h = vertical heightd = diameter
d
h
r
d
Area = r2 or d2/4Circumference = d or 2r
Calculation of Volume. Part full Cylinder
c = half length of cordr = radiusv = versed sine = riser = v2 + c2
2vv = r - (r2 - c2) c = [v(2r-v)]
Volume = 1/3 r2h (h=vertical height)Curved Surface Area = rl (l = slant height)Total Surface Area = rl + r2
Cylinder
r
hl
AreasSector OABD = 1/2 (Length of arc. ABD x Radius, r)
area of circle x angle AOD in degrees .r2.360 360
Segment ABDE = area of sector OABD minus area of triangle OAD.
c
rr
D
B
A Ev
o
C Spherical D Corner E Straight Volume of TwoA Diameter B Height Radius Radius Flange Ends (litres)
1494 192 2286 38 38 340
1900 210 3200 38 38 613
2486 447 2500 95 30 2462
2743 335 3600 38 38 2201
2984 575 3000 180 35 4808
3350 472 3810 50 50 4850
4000 596 4000 38 38 8792
Dished End
AC
D
EB
Let into Tank12.7mm
-
30
C.A
.D &
Manufa
ctu
ring
C.A.D andManufacturing J A Envirotanks have several CAD
workstations & all drawings areproduced in electronic format(PDF, DWG & DXF).
All our storage tanks designs arecarried out using Autocadsoftware.
3D solid modelling utilises ourAutocad Inventor workstation.
JA technicians are able to createbespoke tank designs to suitspecific applications.
-
31E sales@jaenvirotanks.co.uk W www.jaenvirotanks.com
Typic
al
Sto
rage L
iquid
s
Certain liquids may also be storedadequately in unlined carbonsteel tanks please consult ourSales Office. Liquids
for storage in carbon steel internally coated TanksAAliphatic HydrocarbonsAlkanesAmmonia Aqueous Solution 5%Ammonia Aqueous Solution 10%Ammonia Aqueous Solution 20%Ammonia Aqueous Solution 40%Ammonium Carbonate Aqueous Sol. 5%Ammonium Carbonate Aqueous Sol. 10%Ammonium Carbonate Aqueous Sol. 25%Ammonium Nitrate (all strengths)N-Amyl AcetateAnimal Oils and FatsAromasol HAromatic Hydrocarbons (not Benzene)Aromatic Solvents (Petroleum)Aviation Fuel
BBenzineBio FuelsButanol-isoButanol-normalButyl Methacrylate
CCalcium Chloride 10%Calcium Chloride 25%Calcium Chloride SaturatedCalcium HydroxideCarbon TetachlorideCashew Nut Oil (20oC)Castor oil (up to 20oC)Caustic Soda sol. 5%, 10%, 25%, 50%China Wood Oil (up to 40oC)Citric Acid 10%Cod Liver Oil (up to 20oC)Cotton Seed Oil (up to 20oC)Crude Oil (high and low sulphur)CumemeCyclohexaneCyclohexanolP-Cymene
DDecanolDiacetone AlcoholDibutyl PhthalateDicyclopentadieneDiesel OilDiethanolamineDiethylene GlycolDi-2-(ethyl Hexyl) PhthalateDi-IsobutyleneDi-iso Butyl KetoneDi-iso-octyl PhthalateDi-n-butyl PhthalateDipenteneDodencaneDutrex
EEngine OilsEss Aviation o12 12oEsso (base) Light A SpecialEsso Medium BaseEsso Base Light AEthyl BenzeneEthylene Glycol2-Ethyl Hexanol
FFats AnimalFerric Chloride (all strengths)Fuel Oil
GGamlen Tank Cleaning Oils Gasoline Premium (103 Octane)
Gasoline Premium (Europe)Gasoline Regular (Europe)Gasoline Premium (Canada)Gasoline Regular (Canada)Gas Oil (2) (Europe)GlycerineGlycerolGrainGroundnut Oil A.V.10
HHeating Oil No.2 (Canada)Heavy Aromatic NaphthaHeptane-normalHexane-normalHexylene GlycolHigh Aromatic White SpiritHydraulic OilHydrocarbon Aliphatic
IIsobutanolIso DodecaneIso OctanolIso Octyl AlcoholIsopentaneIsoprene
JJet Fuel JP4Jet Fuel A-1
KKaydol Heavy Duty WhiteKeroseneKontol A.162
LLanolineLardLinseed OilLube OilLube Oil AdditiveLubricating Oil
MMagnesium Chloride 5%Magnesium Chloride 10%Magnesium Chloride 25%Magnesium Chloride SaturatedMineral OilsMineral Spirit
NNaphthaNaphtha Coal TarNaphtha HeavyNaphtha PetroleumNaphthenic AcidNonanolNonylphenolNonyl HeptaneNonyl HexaneNonyl ButanolNonyl Butyl AlcoholNonyl PentaneNuoplaz
OOctane-isoOctanol-isoOctyl Phenol Ethylene OxideOils AnimalOils MineralOils VegetableOiticia Oil (up to 20oC) A.V.5OleumOlive Oil (up to 20oC) A.V.10Ortho Xylene
PPalm Oil (up to 40oC) A.V.10Palm Kernel Oil A.V.5ParaffinParaffin WaxPara XylenePeanut Oil A.V.10Pentane-nPentane-isoPerilla Oil (up to 20oC) A.V.10PetrolPetroleum Solvents AliphaticPetroluem Solvents AromaticPhthalate PlasticisersPine OilPolypropylene GlycolPoppy Seed Oil (up to 20oC) A.V.10Potassium Hydroxide (up to 50%)Propylene Glycol
SSea WaterShell Oil 1984Shellsol AShellsol EShellsol TShellsol ABShellsol NShellsol RSoap SolutionSodium Carbonate (all strengths)Sodium Chloride Solution (all strengths)Sodium Dichromate Solution (up to 25%)Sodium Hydroxide (up to 50%)Sodium Hypochlorite (up to 25%)Sodium Nitrate Solutions (all strengths)Solvent NaphthaSolvesso 100Solvesso 150Soya Bean Oil A.V.10Sperm OilSunflower Seed Oil (up to 20oC) A.V.5
TTallow (acid number not greater than 5)TeepolTetrahydronaphthaleneTitanium TetrachlorideTolueneTrichlorethaneTriethylene GlycolTriton X100Triphenyl Phosphate2.2.4 Trimethyl PentaneTung OilTurpentineTurpentine Substitute
WWater BallastWater SeaWhale Oil (up to 20%)White SpiritWhite Spirit Aromatic White Spirit LowAromaticWhite Spirit High Flash
XXylolXylene Industrial (mixed isomers)
ZZ.D.D.P(Zinc Dialykl Dithiophosphate)
-
PO O Box ox 16, 6, Charles es Henry y ry StrStreet, t, et Birmingham, m, B12 2 0SP Member
Main n Switchboararrrrd 0121 1 622 2 4661
General l Sales 0121 1 666 6 477801210121
661 661 666
7786 476 47740121
0121 661 66
1 666 7746 47
6 4787
Drawing g OffffOffffficccce 0121 1 666 6 4779
Sales s OffffOfffffice e HoursSaless OMonday
OfffOffifyy to
e oursHoceicefio o Thursday 8:45amm -- 1:00pm8:45am
2:00pmmm -
:00pm1- 5:00pm
Friday 8:45ammm -- 1:00pm8:45am1:30pm
mm -
:00p1- 4:1
00p15p
pmppppm
E sales@jaenvirirrrotanks.co.uk
W wwwwww.jaenvirirrirrotanks.com
top related