iv. steel hinged doors - drzwi przeciwpożarowe/ppoż ...€¦ · fire protection systems 49 iv....
Post on 03-Apr-2018
217 Views
Preview:
TRANSCRIPT
50Fire protection systems
mcr ALPE 120 single and double leaf HINGED DOORS EI2120/EI160 FIRE RESISTANTCORNER FRAME (STANDARD)
1.1. General characteristics.
Production of fire resistant mcr ALPE hinged doors is based on CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as perfect door leaf surface finish. The core of door leaf is composed of high-density mineral wool and gypsum board glued into two shaped steel sheets of min. 0.75 mm. An additional reinforcement inside the door leaf is applied. The door leaf thickness is 76 mm, weight 58 kg/m². In standard model, the door is equipped with three 3D adjustable hinges made of stainless steel. A door closer for fire doors is required.Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto the surface at the end of production process.
The STANDARD door model is equipped with:• Mortise DIN latch and deadbolt lock• Handle set made of grey or black PVC • Standard European system • Two safety pins• Door closer reinforcement on hinges’ side• Rubber gasket• Intumescent gaskets• Temporary installation bar in the bottom part
On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium
• Door closer • Anti-panic lock and push bars• Electric strike• Electric locks• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016, 9007
• Powder coating - all RAL colours• Kit for external door: anti-rain cap + automatic threshold seal or floor threshold
• Square, rectangular or round glazing• Kick plate made of stainless steel • Position signalling contact (magnetic contact)
• High acoustic version with Rw rate up to 46 dB. Notice: fire rating decreased to EI290
1.2. Door frame.
As standard, the door is equipped with corner frame, The frame is made of profiled and galvanised steel 1.8 mm thick and powder coated with the same RAL colour as the door leaf. Rubber gasket is included.
For minimum and maximum door dimensions - see p. 135-138 (certificates).
Temperature coefficient U = up to 1.1 W/m2 K(PN-EN 14351-1+A1:2010)
51Fire protection systems
* see datasheet CUT-OUTS IN CONCRETE WALL
STEEL DOORS mcr ALPE, SINGLE LEAF EI2120/EI160CORNER FRAME, STAINLESS STEEL HINGES 3D 160
52Fire protection systems
mcr ALPE 120 double leaf HINGED DOORS FIRE RESISTANT EI2120/EI160CORNER FRAME
1.1. General characteristics.
Production of fire resistant mcr ALPE hinged doors is based on CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as perfect door leaf surface finish. The core of door leaf is composed of high-density mineral wool and gypsum board glued into two shaped steel sheets.An additional reinforcement inside the door leaf is applied. The door leaf thickness is 76 mm, weight 58 kg/m². Passive door leaf is equipped with additional vertical profile overlapping the active leaf.In standard model, each door leaf is equipped with three 3D adjustable hinges, made of stainless steel. A door closer for fire doors is required.Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto the surface at the end of production process.
The STANDARD door model is equipped with:• Mortise DIN latch and deadbolt lock• Handle set made of grey or black PVC • Standard European lock cylinder system • Automatic flush bolt on passive leaf• Two safety pins• Door closer reinforcement on hinges’ side• Rubber gasket• Intumescent gaskets• Temporary installation bar in the bottom part
On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium
• Door closer • Other handle models, if applicable• Anti-panic lock and push bars• Frame electric strike
• Electric locks• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016, 9007
• Powder coating - all RAL colours• Kit for external door: anti-rain cap + automatic threshold seal or floor threshold
• Square, rectangular or round glazing• Kick plate made of stainless steel • Position signalling contact (magnetic contact)
• High acoustic version with Rw rate up to 45 dB. Notice: fire rating decreased to EI290
1.2. Door frame.
As standard, the door is equipped with corner frame. The frame is made of profiled and galvanised steel 1.8 mm thick and powder coated with the same RAL colour as the door leaf. Rubber gasket is included.
For minimum and maximum door dimensions - see p. 135-138 (certificates).
Temperature coefficient Ud = up to 1.1 W/m2 K(PN-EN 14351-1+A1:2010)
53Fire protection systems
* see datasheet CUT-OUTS IN CONCRETE WALL
STEEL DOORS mcr ALPE, DOUBLE LEAF EI2120/EI160CORNER FRAME, STAINLESS STEEL HINGES 3D 160
54Fire protection systems
mcr ALPE 120 single leaf HINGED DOORS FIRE RESISTANT EI2120/EI160INTERNAL FRAME
1.1. General characteristics.
Production of fire resistant mcr ALPE hinged doors is based on CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as perfect door leaf surface finish. The core of door leaf is composed of high-density mineral wool and gypsum board glued into two shaped steel sheets of 0.75 mm. An additional reinforcement inside the door leaf is applied. The door leaf thickness is 76 mm, weight 58 kg/m². In standard model, the door equipped with three 3D adjustable hinges, made of stainless steel. A door closer for fire doors is required.Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto the surface at the end of production process.
The STANDARD door model is equipped with:• Mortise DIN latch and deadbolt lock• Handle set made of grey or black PVC • Standard European lock cylinder system • Two safety pins• Door closer reinforcement on hinges’ side• Rubber gasket• Intumescent gaskets• Temporary installation bar in the bottom part
On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium
• Door closer • Anti-panic lock and push bars• Electric strike• Electric locks• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016, 9007
• Powder coating - all RAL colours
• Kit for external door: anti-rain cap + automatic threshold seal or floor threshold
• Square, rectangular or round glazing• Kick plate made of stainless steel • Position signalling contact (magnetic contact)
• High acoustic version with Rw rate up to 46 dB. Notice: fire rate decreased to EI290
1.2. Door frame.
The door may be equipped with INTERNAL type of frame. The frame is made of profiled and galvanised steel 1.8 mm thick and powder coated with the same RAL colour as the door leaf. Rubber gasket is included.
For minimum and maximum door dimensions - see p. 135-138 (certificates).
Temperature coefficient U = up to 1.1 W/m2 K(PN-EN 14351-1+A1:2010)
55Fire protection systems
STEEL DOORS mcr ALPE, SINGLE LEAF EI2120/EI160INTERNAL FRAME, STAINLESS STEEL HINGES 3D 160
56Fire protection systems
mcr ALPE 120 double leaf HINGED DOORS FIRE RESISTANT EI2120/EI160INTERNAL FRAME
1.1. General characteristics.
Production of fire resistant mcr ALPE hinged doors is based on CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as perfect door leaf surface finish. The core of door leaf is composed of high-density mineral wool and gypsum board glued into two shaped steel sheets. An additional reinforcement inside the door leaf is applied. The door leaf thickness is 76 mm, weight 58 kg/m². Passive door leaf is equipped with additional vertical profile overlapping the active leaf.In standard model, each door leaf is equipped with three 3D adjustable hinges made of stainless steel. A door closer for fire doors is required.Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto the surface at the end of production process.
The STANDARD door model is equipped with:• Mortise DIN latch and deadbolt lock• Handle set made of grey or black PVC • Standard European system • Automatic flush bolt on passive leaf• Two safety pins• Door closer reinforcement on hinges’ side• Rubber gasket• Intumescent gaskets• Temporary installation bar in the bottom part
On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium
• Door closer • Anti-panic lock and push bars• Frame electric strike• Electric locks
• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016, 9007
• Powder coating - all RAL colours• Kit for external door: anti-rain cap + automatic threshold seal or floor threshold
• Square, rectangular or round glazing• Kick plate made of stainless steel• Position signalling contact (magnetic contact)
• High acoustic version with Rw rate up to 45 dB. Notice: fire rating decreased to EI290
1.2. Door frame.
The door may be equipped with INTERNAL type of frame. The frame is made of profiled and galvanised steel 1.8 mm thick and powder coated with the same RAL colour as the door leaf. Rubber gasket is included.
For minimum and maximum door dimensions - see p. 135-138 (certificates).
Temperature coefficient U = up to 1.1 W/m2 K(PN-EN 14351-1+A1:2010)
57Fire protection systems
STEEL DOORS mcr ALPE, DOUBLE LEAF EI2120/EI160INTERNAL FRAME, STAINLESS STEEL HINGES 3D 160
58Fire protection systems
mcr ALPE 120 single leaf HINGED DOORS FIRE RESISTANT EI2120/EI160 EMBRACING FRAME
1.1. General characteristics.
Production of fire resistant mcr ALPE hinged doors is based on CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as perfect door leaf surface finish. The core of door leaf is composed of high-density mineral wool and gypsum board glued into two shaped steel sheets of min. 0.75 mm. An additional reinforcement inside the door leaf is applied. The door leaf thickness is 76 mm, weight 58 kg/m². In standard model, the door equipped with three 3D adjustable hinges made of stainless steel. A door closer for fire doors is required.Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto the surface at the end of production process.
The STANDARD door model is equipped with:• Mortise DIN latch and deadbolt lock• Handle set made of grey or black PVC • Standard European lock cylinder system • Two safety pins• Door closer reinforcement on hinges’ side• Rubber gasket• Intumescent gaskets• Temporary installation bar in the bottom part
On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium
• Door closer • Anti-panic lock and push bars• Electric strike• Electric locks• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016, 9007
• Powder coating - all RAL colours• Kit for external door: anti-rain cap + automatic threshold seal or floor threshold
• Square, rectangular or round glazing• Kick plate made of stainless steel • Position signalling contact (magnetic contact)
• High acoustic version with Rw rate up to 46 dB. Notice: fire rating decreased to EI290
1.2. Door frame.
The door may be equipped with EMBRACING type frame (wrap around frame) which overlaps the wall. The frame is made of profiled and galvanised steel 1.8 mm thick and powder coated with the same RAL colour as the door leaf. Rubber gasket is included.
For minimum and maximum door dimensions - see p. 135-138 (certificates).
Temperature coefficient U = up to 1.1 W/m2 K(PN-EN 14351-1+A1:2010) .
59Fire protection systems
STEEL DOORS mcr ALPE, SINGLE LEAF EI2120/EI160EMBRACING FRAME, STAINLESS STEEL HINGES 3D 160
* see datasheet CUT-OUTS IN CONCRETE WALL
60Fire protection systems
mcr ALPE 120 double leaf HINGED DOORS FIRE RESISTANT EI2120/EI160EMBRACING FRAME
1.1. General characteristics.
Production of fire resistant mcr ALPE hinged doors is based on CNC technology of door leaves integration by means of bending and riveting. This method ensures considerable resistance to corrosion as well as perfect door leaf surface finish. The core of door leaf is composed of high-density mineral wool and gypsum board glued into two shaped steel sheets. An additional reinforcement inside the door leaf is applied. The door leaf thickness is 76 mm, weight 58 kg/m². Passive door leaf is equipped with additional vertical profile overlapping the active leaf.In standard model, each door leaf is equipped with three 3D adjustable hinges made of stainless steel. A door closer for fire doors is required.Doors are manufactured tailor-made to customer’s order. For transport and assembling works, the doors are protected by a plastic film which is laid onto the surface at the end of production process.
The STANDARD door model is equipped with:• Mortise DIN latch and deadbolt lock• Handle set made of grey or black PVC • Standard European system • Automatic flush bolt on passive leaf• Two safety pins• Door closer reinforcement on hinges’ side• Rubber gasket• Intumescent gaskets• Temporary installation bar in the bottom part
On customer’s request, the door may be equipped with various accessories and ancillary equipment: • Door handle made of stainless steel or aluminium
• Door closer • Anti-panic lock and push bars• Electric strike• Electric locks• Pre-coated metal sheets: RAL 5010, 9002, 9006, 9010, 9016, 9007
• Powder coating - all RAL colours• Kit for external door: anti-rain cap + automatic threshold seal or floor threshold
• Square, rectangular or round glazing• Kick plate made of stainless steel • Position signalling contact (magnetic contact)
• High acoustic version with Rw rate up to 45 dB. Notice: fire rating decreased to EI290
1.2. Door frame.
The door may be equipped with an EMBRACING type of frame. The frame is made of profiled and galvanised steel 1.8 mm thick and powder coated with the same RAL colour as the door leaf. Rubber gasket is included.
For minimum and maximum door dimensions - see p. 135-138 (certificates).
Temperature coefficient U = up to 1.1 W/m2 K(PN-EN 14351-1+A1:2010)
top related