item name: vertical tensile testing machine tw-320imgusr.tradekey.com/images/uploadedimages/... ·...
Post on 13-Jul-2020
16 Views
Preview:
TRANSCRIPT
Item Name: Vertical Tensile Testing Machine
Item No: TW-320
This equipment apply to testing of extend ,adhesive, peel off, tearing of a variety material
such as Rubber. Plastic. Leather, Metal, Nylon string, Fabric, Paper, Aviation, Packing,
Construction, Petrochemical, Electronics, Vehicle…. So that it as a essential test equipment on
Quality management, Incoming control. Physical testing. Dynamical researching, Material
development.
Capacity options:200 pound
Units Switch : kg,f、N 、LBf
Analyse :1/25000
Precision :±1%
Maximum ( not including clamp) :600mm
Testing Speed:50-500mm/min
Available width :Unlimited
Weight: 50 kg
Power: 1∮,AC200V, 3A
Display : LCD
Including printer
Item No. TW-319
Item name :Mircrocomputer Tensile Testing Machine
Description :To determine diverse of material of tension,
tearing,
Peel off and etc…. (including screen)
capacity options:100, 200, 500 N; 1, 2, 5 kN
Unit (switchable):kgf , gf, Ton, lbf, N, kN
Tensile Tester is applicable in the universal tensile tests of plastic films, laminated films, flexible packaging materials, adhesives, adhesive tapes, pressure sensitive tape, rubber, paper, aluminum-plastic boards and so on. Tensile Tester can do the test of tensile, tensile resistance and elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel. Universal Tensile Tester conforms to standards of ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, and ASTM F904, ISO 37, JIS P8113.
Item Name :Index Push & Pull Guage (Japan)
Item No:TW-318
With simple operation, precision, peak value maintance, indicate two scales
Application: electroics,components of Vehicle,Lighter & portfire ,
construction, fabric
, Petrochemical,mechanism, pen and IT line test etc…..
Item Name: Digital Push & Pull tester
Item No. TW-317
digital push & pull small multi-function, high-precision load tests of
push-pull machines. Apply to a variety of products push load tests,
strength tests Slide, damage test. Figures show high resolution,
easy to use and efficient for the new generation of push force
testing device.
Accuracy of 0.5, minimum reading up 0.001N; Testing process is
to maintain peak function. N, Kgf, Lbf three units, and automatic
switching. Environmental protection and energy saving design of the machine, 10-minute
operation automatically without electricity shutdown. Can be installed on various pilot plant
and test fixture as a dedicated machine
Item Name: Dual Arm Tensile Testing Machine
Item No.: TW-316
Apply to metal , plastic , paper , color printing package,
stickness tape, case, fabric, foodstuff, cable , electronics
test and etc……, can test the physics capability of
various material, finished products,semi-manufactured goods.
using different clamp can do resistant pull test, resistant press test ,
bending test , tearing test etc……
Item Name: Desktop Tensile Tester
Item No.: TW-315
Application: rubber /plastic tension test, plastic bending test,
cable and wire tension test, high elastical material tension
test, fabric broken test, shoe material tension & tearing test.
capacity :200 pound
Units switchable: kgf, N, Ibf
Load analyse:1/25000
Precision: ±1%
The most range :600mm
testing speed: adjustable
Motor: AC conversion motor
weight: 50kg
Power: 1∮,AC200V, 3A
Including printer
Item Name: Manual Vertical Machine Frame (volution)
Item No. :TW-314
manua operationl vertical machine frame is used for push & pull strength tester prepare.
Suitable for torn testing, press tension testing etc……
dimension:L×W×H(mm) 160×240×460
rating load:500N
range:150mm
manual operation,T sharp volution
item Name:Manual Vertical Machine Frame(manual press)
Item No.: Tw-314
manua operationl vertical machine frame is used
for push & pull strength tester prepare. Suitable
for torn testing, press tension testing etc……
Dimension: L×W×H(mm) 240×150×
Item Name : Horizontal Manual Test Stand
Item No.: TW-313
Horizontal manual test stand
is used for prepare of push & pull strength tester series,
can be assembled to different test machine. Suitable for
torn testing, push & pull testing. With horizontal installtion,
simple operation, can be installed on the table, steady.
Item Name:Computer Servo Tensile Testing Machine
Item No: TW-312
This equipment apply to testing the extend ,adhesive,
peel off, tearing of a variety material such as Rubber.
Plastic. Leather, Metal, Nylon string, Fabric,
Paper, Aviation, Packing,Construction,
Petrochemical, Electronics, Vehicle….
Testing the physics capability of various materials,
finished products, semi-manufactured goos. With different clamps, can be used for resistant
pull testing, bending testing,tearing testing, shearing force testing
Standards:GB、ISO、ASTM、BS、DIN、JIS
Capacity options :100, 200, 500 N; 1, 2, 5 kN
units switch:kgf, lbf , N , kN, kPa, MPa
load analyes:1/200,000
load precision:±0.25%
Max. range (not include clamp):1000mm
efficiency width:410mm
Testing speed :0.0001~1000 mm/min or specified by user
data sampling frequency:200 tims/second
Motor:AC
sevro motor dimension :(W×D×H) 75×70×225 cm
computer & desk dimension:(W
×D×H) 100×60×118 cm
weight:152kg
Power:1∮,220V,15A(or specified by user)
Item Name: Universal Dual Arm Tensile Test Machine
Item No.: TW-311
Particularly applicable to the strong textile testing,
low-cost, high-performance. The accuracy of
Crosshead movement shows that the first
reading can be accurate to 0.001 mm, the first
Crosshead location can be absolutely accurate
to 0.001 mm.. Precision ball screws and guidance
systems, high-precision closed-loop speed controller,
Postponed optional devices and rapid return, RS232 computer interface, will be contained
and itinerary protection restrictions, immediate load and tensile test cycle, the long-term
creep testing.
Digital control sample damage detection, automatically without mechanical tension to return
to the state test location, automatically detect calibration, impact protection, optional
automatic reduction, automatic back to zero.
Suitable for testing the resistant bend, resistant pull, resistant fold , can be specified by user.
Item Name: Universal Singel Arm Tensile Testing Machine
Item No: TW-310
Particularly applicable to the strong textile
testing, low-cost, high-performance. The accuracy of
crosshead movement shows that the first reading
can be accurate to 0.001 mm, the first
crosshead location can be absolutely
accurate to 0.001 mm.. Precision ball
screws and guidance systems, high-precision
closed-loop speed controller, Postponed optional devices and rapid return, RS232 computer
interface, will be contained and itinerary protection restrictions, immediate load and tensile
test cycle, the long-term creep testing.
Digital control sample damage detection, automatically without mechanical tension to return
to the state test location, automatically detect calibration, impact protection, optional
automatic reduction, automatic back to zero.
Specifications:
Rang (not including the length of clamp):1100mm L:460mm W:440mm H:1590mm work
section:100mmMa: Max load:300 kg speed range 0.001-500mm/min;Reture speed :
500mm/min;weight:60kg。
Item Name: Low-Temperature Freezer Cabinet series
Item No. TW-309
Apply to storage testing of toy, plastic,
electronics at the low temperature
Precision temperature control:
cabinet temp. -30~0℃,can be specifed by user.
With digital temperature indicator, the running
status can be know at any time.
Security control system: If starting time delay,
the engine will be off gap to protect.
Humanity design: with security doorlock, prevents to open
at will; with anticorrosion stair type the gallbladder, suit for the disposition of optional rack.
Item Name: Oven Series
Item No. TW-308 (TX-016)
1 Interior uses the mirror surface stainless steel arc argon to weld the manufacture but to become, exterior uses the high quality steel plate, the molding is artistic. 2 uses has controls the warm protection, the digital demonstration microcomputer temperature controller, has fixed time the function, controls warm precise is reliable. 3 the hot blast circulatory system by can the continuous working air blower and the appropriate air flue is composed under the high temperature. The work indoor temperature is even. 4 fixed time scope: 1-9999min 5 temperature fluctuation: +-1% (full measuring range
Item Name: Ozone Test Chamber
Item No.: TW-307 (HJ-042)
Ozone Test chamber is used for testing
rubber and polymer. Put the sample in certain
density ozone environment, after having certain
discoloration or the scheduled time and compare
with the standard card.
1 Temperature control range: +10℃~ 60℃
2.Temperature uniformity: ±1℃
3 Ozone consistency: adjustable range 20-200pphm
4.Studio dimension (D×w×H): 400×400×200mm
5. 16 pcs samples can be tested at the same time
Standards :AAATCC 109 ISO 105-G03 ASTM1149 ISO1431 GB7762-2003
GB/T136421-92 HG/T2869-97 GJB1217-91
Item Name: Q-Sun Xenon Fastness Tester
Item No: TW-306
This tester is used to simulate the largest accord
with the natural world-wide spectrum of
sunlight Xenon arc lamp reproduction under
different environments to the destructive wave,
affordable xenon arc instruments with sophisticated
controls for optimal weathering and lightfastness testing
Standard: GB/T16999,8427,8430;FZ/T75002;ISO105-B06,105-B04
Light source:xenon arc Lamp
cooling:Wind
revolution and rotation:5rpm,180℃/rpm
Sampling plywood:10
Dimension :900×500×1650mm(L×W×H)
Power :AC220V 3.0KW
Item Name: Temperature & Humidity Meter (30 Channels)
Item No.TW-305
Temperature range:-100~+250℃,
Humidity range: 10~99%RH(10~100℃),
Humidity precision:
(humidity)≤±1%RH(40~99%RH,15~90℃)
(humidity)≤±2%RH(Other Humidity,15~90℃);
The maximun: 30 channel temperature and 15 channel humidity (set temperature or
humidity through program.
Sensor Models:Pt100;
With print output, the print time can be set. Input every calibration parameter according to
the measure results.
Item Name: Chamber for Raining
Item No.:TW-304
This machine is for waterproof capability,
like electronic, measurements, shell, sealing parts
and components in rainy condition, Bin body is
made of stainess steel with clear window,
with turnable in test bin, with speed adjuster.
Working angle: 90℃ 180℃ 270℃
Specilications:
Water Spray circle R:400 mm
Hole Diameter of water spray : φ0.1mm
Hole diameter :16mm
Distance between hole and hole :50mm
Number of hole:25
The speed of water spray can be specified , range 0~99h 99m 99s
Wing speed: 2×600 about 12 s
Item Name: Salt Spray Tester
Item No. TW-303
The salt spray test instrument is one of testing equipment used for
Resisting humidity salty mist mold to keep artifical climate.It is also an
Important experiment equipment to research different kinds of enviroment
Adaptation and reliability of instruments can used for neutral salty mist experiment
specifications
1 Interior and exterior were made of PVC material,
Anti-corrosive, vibration-proof, easy to clean, does not have the divulging phenomenon
certainly
2 With high sprecision temperature indicator
3 Without overflow, with water obturation structure
4 Tower spray, mist distributes uniformity, The subsidence quantity adjusts freely, spray
nozzle with non-crystallization, dual pressure settings, as well as excess temperature
protection; with Continuously or the cyclical atomization optional , without the air-pressure
machine
5 precise glass spray nozzle, non-crystallization blocking within 400 hours
Watered by itself or manual once lack of water
Precision digital thermal controller , also with spray protection system.
Item Name: Thermal Shock Tester
Item No. TW-302
Shocked in low and high temperature
Specification: TSC-F
Standard: GB.GJB.MIL ,ASTM CNS.IEC.JIS
Material : Stainess steel(304)
Control precision: ±0.5℃
This machine is for testing the capability of the parts and material stay in high and low
temperature with a short time and long time . check the chemical transfer and physical
damage of inner changing, apply to testing metal, plastic, rubber , electronical and etc.
With touch color LCD
Item Name:Programmable Temperature and Humidity Tester
Item No.TW-301
Apply to testing the heat endurance, dry-endurance,
wet-endurance of electronics components,
industry stuff, toy, furniture and ect.
Temperature range:-20~1+100(150)℃,
Humidity range: 30%~98%RH,
Humidity precision:
(humidity)≤±1%RH(40~98%RH,15~90℃)
(humidity)≤±2%RH(Other Humidity,15~90℃);
The inside dimension size:1mx1mx1m
Interior material: stainess steel SUS304#
Exterior material: Stainess steel SUS304#
Power :AC220V、1PH、50/60HZ
Safety device: With leakage and overloading protector
Item Name: Aging Yellowing Resistance Tester
Item No. TW-300
Products or materials in transit, through the
role of solar radiation and heat to make color
changes, the machine is designed to simulate
such an environmental testing products,
the degree of yellowing
Sample is generally believed that the product testing in three hours at 70℃ , about equal to
the natural environment within 2 months
Interior specification: A60*45*40cm,B90*60*50cm
Force Angle: 15°(24pcs)30°(15pcs)
Temperature control range:indoor temp.~ 80℃
Spray volum: 1~10cc/h
Temperature precision: ±0.3℃
Made stuff: F.R.P
Standard Accessories:test salt, The volume of barrels, tool
Power 1¢、220V/50HZ
Item Name: 45 degree Flammability Tester
Item No.TW-227
45 degree flammability tester, detection of the
combustion properties of textiles.
Stainess testing room with glass window
After the ignition, automatic time (0.01 second precision)
Automatic or manual firing device
matches the type with to brush the type equipment and the nylon hair brush. standard ASTM
D1230 FTMS 191-5908 CRF 16-1610CALIF TB 117NFPA 702
technical parameter:
1. spread time scope: 0-99.99s, resolution: 0.01s.
2. Firing time: 1s or establishes willfully.
3. Igniter model: Conforms to ASTMD1230.
4. External dimensions: 400×300×500mm(L×W×H).
5. Weight: 18kg.
6 Power AC 220V/50Hz/2A
Item Name: En71 Toy Comprehensive Flammable Tester
Item No.TW-226
Testing the child clothing or the toy
and accessories' combustibility, appraises
the following toy type the rapidity
of combustion and time
1. The child dresses clothes (put on makeup clothing),
particularly has clothes which and similar goods
2 the shawl, flutters hangs. The child may enter toy, like game tent and playroom
3. The child may embrace the toy, fills software toy
4. By styles and so on mask and wig appears may the toy standard which wears: EN71-2
2003
specifications
1. The PLC control, the time is accurate, Chinese man-machine contact surface.
2. The different test method provides different sample jig
3. The jig simplicity of operator facilitates
4. The jig may adjust willfully, suits different sample
5. Flame angle willfully adjustable size: 100×60×120(H) weight: 30Kg power : 220V/50Hz
Item Name: Surface Flammability Tester
Item No. TW-225
The superficial flammable reflectoscope reflector,
commonly used in the examination down or
the superficial knowledge fabric's flammability,
the flame spreads fast in the fabric surface,
but the fabric Kieb structure is incombustible.
Its motion butane burner in the fabric surface
derailing, may examine whether to have the
superficial flame and the record Kieb's damage
situation. technical norms:
1. Nozzle movement speed: 150 millimeters/second ±5 millimeter/seconds (bidirectional),
the nozzle moves the distance: ≥300 millimeter.
2. May test the fabric plush altitude: 0-70mm; Flame altitude: 0-60mm continuously
adjustable.
3. Volume: 600mm×400mm×370mm; Weight: 20kg.
4. Power : AC220V±10% 50Hz; Power: 50W.
5. Meet standards: BS4569, EN71
Item Name: Nail bed flammable tester
Item No. TW-224
standard:ASTM F963 ; dimension:25.4*25.4cm.
Item Name: Table Torque Gauge
Item No.TL-408
Double directional survey ability;
With biggest reading indicator;
With kgf.cm .lbf.in units double scale
carries on the zero position establishment from exterior;
precision: ±3%
Item Name:Sound Level Meter
Item No.TW-260
Test range: 30~130dBA, 35~130Dbc
automatic shift: 30~130 decibel
precision: ±1.5dB
Kinetic Energy Tester
Used to test related materials from the launch of the toys and toys from the launch of a
non-exclusive material that may be caused by the ejection of some, but not all of the
potential risk of accidents.
1. Power: 220AC/50Hz.
2. Size: 240mm × 310mm × 130mm.
3. Crystal: 1MHz
4. Time display numbers: 7.
5. Display range: 0.000001 to 9.999999 sec.
6. Shooting passage dimension: diameter 60MM (in channels)
7. Sensor Distance:
Within channel: Fixed 150mm external sensor: adjustable 40mm-420mm
8. Internal sensor sensitivity: greater than 2mm
Item Name : Dry Clean Machine
Item No.TW-261
Standards: ASTM D1230 ASTM F963 EN71
Using with each kind of combustion reflectoscope reflector ,
in the fabric burning test pretreation. Washing the burning
inhibitor off the fabric surface with the tetrachloroethylene
and do the combustion test on the fabric pretreatment.
With stainess steel body.
the shell of tank volume: 11. 4L
rotational speed: 45~ 50rpm
gyro-axle inclination angle: 50°±1°
timing control: 0~999 minute
weight: 50KG
Power: 220VAC 50HZ
Item Name: Button Pull Tester/ Button Snap Tester
Item No. TW-258
To define the garments manufacturer responsibilities
and duties to ensure that snaps are applied
appropriately to all garments. To prevent separation
between the snap and the garment, which represents
a dangerous situation if the loose snap is swallowed.
This test method cover an uniform force required to pull a snap attachment perpendicular to
the garment. The snap attachment is not forced to separate from the garment.
This test method is as per American Buyers and Covers almost all buyers specifications in
America
This method is required attachment of snaps to specimens using specifications provided by
the producers of the snaps.
size: 280 x 230 x 735 mm (L×W×H)
weight: 35 kg
standard: 16 CFR 1500.51-53, ASTM WK4510 PS79-96, ASTM F963, EN71-Part1, M&S P115A
Item Name: X Ray Fluorescence Spectrometer
Item No. TW-259
Specially designed for RoHS substance detection and full
element analysis and jewelery analysis
X fluorescence principle: Energy dispersion X-ray
fluorescence analytic method analytical element:
Na the ~U arbitrary element, the lead (Pb),
the mercury (Hg), six price chromium (Cr6+), the multi-bromine biphenyl (PBB) and the
multi-bromines unite the phenylate (PBDE) the bromine, analyzes six price chromium directly
(Cr6+) content
Technical specification: Picks out lower limit (Cd/Pd):Cd/Cr/Hg/Br≦2 ppm, Pb≦5 ppm
sample shape: Random size, willfully anomalous shape sample type: Revertex/metal/thin
film/powder/liquid
X ray tube: Target material /Mo tube voltage /5~50 kV tube electric current/biggest 1~1000
μA illumination diameter: 2nd, 5, 8mm
detector: Si(PIN) semiconductor high sensitivity detector
light filter: Eight kind of new light filter automatic selection
sample localization: Micro moving load platform (match)
sample observation: 30 time of colored CCD camera
micro area analysis: X light focuses the micro area analysis system (match) software the
quantitative analysis: Theory Alpha method of correlates (NBS-GSC law)
data processing: IMB PC/AT/above memory /256 MB/above hard disk /40 GB
system: Windows XP legal copy power: 1.1kW
weight: 40Kg
external dimensions: 550(W)×450(D)×450(H)mm
disposition: Standard
layout: Si(PIN) semiconductor high sensitivity detector (15000 hours) high-voltage power
supply (RSD
Item Name: Resistance Capability Tester
Item No. TW-255
Appy to the rope which connects children and toys ,
and a length of more than 2m of the toys and
kites and other flying toys, its resistance
must over 100MΩ/cm
To remind users that playing the kite at thunderstorms or near the grid will cause danger.
Item Name : Key-Press Tester
Item No. TW-256
Through simulating human hand repeatly
touch the key-press and switch to evaluate
the lifetime capability of toy key-press or
switch. Can be specified by customer.
Item Name: Infrared Thermometer
Item No.TW-250
Item Name: Moduel D
Item No.TW-249
Conforms to EN71-8:2003, imitates the human body (big head ) the aperture test module
Item Name: Electronic Bursting Strength Tester
Item No. TW-216
This tester is suitable for the various
packing material, including common paper,
corrugated paper, toilet paper, packing,
paper and ect…., also for the leathers,
the cloth class, packs above the thin film,
but effective carries on the monitor to the
product quality. The TNB005B even may print
the test value and the mean value, time, data meet standards and so on
date: JIS-P8112, L1018, ASTM-D2210, TAPPI-T403
each parameter: Induction
way: Pressure switch
Printing data: Test value and mean value, time, data (TNB005B) instruction ways
date: Digital A/D value entering rate 100 /S, the test precision is high, 5 group of memory
test result capacity choice: 0~100kg/cm2 flowing tubing head
pressure speed: High-pressured 170±10ml/min
motor: 1/4HP volume (W*D*H):43*53*53cm
weight: 68kg
power: 1∮, AC220V,3 A electronic formula resistance to spalling testing machine B electronic
formula resistance to spalling testing machine (including printer)
Item Name:TTF Push & Pull Tester
Item No. TL-404
Manual controllor can change the status at anytime
Regulation of entry and discharge flow rate can make
different speed combination
Item Name: Torque Guage
Item No. TL-409
Measurement used to measure
the product or product components to
be capable of sustaining a much torque
This guage is used to measure the capable
torque of product or components, record the max value of torque.
Standard:ASTM F963, EN71
mark:QA in the toy industry usually use BTG-type torque,like BTG torque guage, 9BTG or
15BTG
Item Name: Impact Tester
Item No. TW-201
Reduce the material damage or the
danger of imitation Toys protection devices as the real face.
Range: imitation protect device ( clear material protector, headpiece,cap,blinker)
Standards: EN 71-1998 8.7
Specification: bottom board 300(l)x300(w)x16(h)mm 2 adjustable height: 0-200mm 3.
impact hammer diameter: 80.00mm, impact bammer weight: 1Kg
5 Metrics / imperial units high sensitive rule
Item Name: Rattle Test Fixture
Item No.TW-203
Oval / round rattle tester (audible toys test template)
is a simulation of children's oral capacity, testing toys or toy parts on the potential risk of
suffocation or swallow
Standard: 16 CFR 1510 ;ASTM F 963 4.21;EN71-1998 8.17;GB6675-2003 A.5.3
material :Aluminum alloy, surface oxidation
Item Name: Crock Meter- Manual
Item No. TW-215
The manual crock meter is designed to test the discoloration extent of dry textile and leather
after abrasion. The rubbing hammer of this crock meter is wrapped with dry or wet white
cotton cloth, then rubbed on the specimen clamped to the testing table ten times for 10
seconds. The cloth is then removed to evaluate the discolor level in comparison with a
gray-scale.
Item Name :Nine Steps Chromatic Transfrence Scale
Item No. TW-214
To visually evaluate colour transfer or staining, nine steps
Standard: AATCC Evaluation Procedure 8
Item name:Gray Scale
Item No. TW-213
For assessment of change in colour and staining
in colourfastness testing 1-5 steps
with half steps, in wallet.
AATCC standard gray scale, apply to assessment of change in color and staining in
colorfastness testing 1-5 steps, with half steps, in wallet.
AATCC fade gray scale, meet to ASTM/AATCC/American standard
AATCC staining gray scale, meet to ASTM/AATCC/American Standard
ISO/BS standard gray scale,apply to assessment of change in color and staining in
colorfastness testing 1-5 steps, with half steps, in wallet.
ISO/BS fade gray scale,Standard:BS EN 20105-A02,ISO 105-A02, BS 1006 A02,M&S
C2。
ISO/B staining gray scale,standard:BS EN 20105-A03,ISO 105-A03, BS 1006 A03,M&S
C2。
Homemade gray scale,pply to assessment of change in color and staining in colorfastness
testing 1-5 steps, with half steps, in wallet.
Item Name: Color Assessment Cabinet
Item No. TW-212
This cabinet is used for textile,dyeing, printing,
plastic, painting, print ink, photography and similar industry.
Detailed specification
With good apperarence, LCD display. Touch control switch, Automatic power-off memory
function, the cumulative light time.
light source types
1.D65 International standards artificial daylight
2.F/A Sunset light, yellow light, family light, hotel light
3.CWF Americal store light
4.TL84 western Europe , Janpanese store light
5.UV power 1∮、220V/50HZ
Item Name: Sharp Point Tester
Item No. TW-221
For Assessment if the product meet to sharp point standard.
The purpose of consummer safty specification is to establish nationally recongized sarety
Requirements for toys.Its application will minimize accidents in the normal, intended use and
reasonaby foreseeable abuse of the toys covered by the specification.
Standard: 16 CFR 1500.48 ASTM F 963 4.8 EN-71 1998 8.12
Item Name: Sharp Edge Tester
Item No.TW-220
The sharp edge tester is used to determine whether accessible edges of toys for use children
are liable to cause injury to the child
Standard: 16 CFR 1500.49 ASTM F 963 4.7 EN-71 1998 8.11
Accessories
Charging units complete with connector
Foot switch
Standard import sharp edge paper
Destop fixed board
Item name : Small Parts Tester
Item No. TW-206
An invaluable safety item for parents, the Small Parts Tester is a tool used to determine if a
toy, toy part or other item poses a choking risk to children under age 3. Note that this is a tool
for parents, not a toy for children.
Standard: ASTM F963 4.6, EN71-1998 8.2,GB6675-2003 A.5.2, 16 CFR 1501
Item Name: Bite Tester
Item No. TW-207
Purpose
To minimize potential hazards for toys that a child may put in its mouth.
• Products intended to come in contact with the mouth or intended to be bitten. Refer to
Appendix A for product examples.
• Products that look like food per QSOP 0006-3048, Food Imitations
• All products age graded for children under 36 months
Simulation of the teeth of children, toys for testing the surface of parts and accessories to
highlight our ability to bear the bite.
Standard: ASTM F963, 16CFR 1500.52C
Pacifiers fixture
conforms to 16 CFR 1511(ASTM F 963 4.22)
standard
Vertical Flammability Tester
This tester is used for testing the inflammation capability of children’s sleepwear and decoration of fabric. Including stainless steel cabinet with observation window and back wall painted black for easy test viewing. Calibrated burner. Flame speed is measured in time. Specimen holders, burners and associated hardware are dependent on the test standard and must be specified. Temperature & Humidity Meter It is characterized at : large-character LCD display,multi-function,low power
consumption,high stability & accuracy. Feature: display temperature,humidity and time
simultaneously memory of MAX & MIN measuring value 12- hour/24 hour displaying
system selectable C degree / F degree unit selectable Integral-hour alarm function
Alarm function clock & calendar function (month and date) desk-top placing or wall
hanging Temp range: _50+70 degree(-58+158 F degree) Humidity range:10%-99%RH
storge condition:-20 degree~60 degree,20~80% RH
TW-229 Mouth Toy Endure Tester
Applications: To prevent mouth moving toys or children's mouthpiece has been mistakenly inhaled and
cause a choking hazard. Features: 1. Instruments to meet the 5s at least 295 cubic centimeters within + /
-10 cubic centimeters of gas, and can be 10 times alternately blowing, suction toy. Parameters: 1. Overall
dimensions (L × W × H mm): 800 × 500 × 500 standard: EN71.8.17
TW-228 Toy Box Cover Durability Tester
To test the durable lid and durability of toy box covers
Test principle: GB EN
Test Views: 0 ~ 999,999 times
Can be set Test Frequency: 0 ~ 10 times / min
Display: Large LCD touch screen
Digital Display Control: microcomputer automatic control
Action mode: Electric Automatic
The specimen is damaged: Automatic shutdown
Liquid Leak Test Needle
Diameter 1MM, the top radius 0.5MM steel needle, load 5N, for leakage testing, GB A.5.19
PROJECTILE VELOCITY TESTER Used to test related materials from the launch of the toys and toys from the launch of a non-exclusive
material that may be caused by the ejection of some, but not all of the potential risk of accidents.
1. Power: 220AC/50Hz.
2. Size: 240mm × 310mm × 130mm.
3. Crystal: 1MHz
4. Time display numbers: 7.
5. Display range: 0.000001 to 9.999999 sec.
6. Shooting passage dimension: diameter 60MM (in channels)
7. Sensor Distance:
Within channel: Fixed 150mm external sensor: adjustable 40mm-420mm
8. Internal sensor sensitivity: greater than 2mm
Sound Lever Meter
Applicable standards: IEC 651 Type2
Range: LO (Low) - Weighted: 35 - 100dB A HI (High) - Weighted: 65-130dB C LO (Low) - Weighted: 35 -
100dB C HI (High) - Weighted: 65-130dB
Resolution: 0.1dB
Frequency Range: 31.5Hz to 8KHz
Accuracy: ± 2dB
Redo Range: 65dB
Balance the network frequency: A, C
Operation temperature and humidity: 0 ℃ to 40 ℃ <80% R. H
Storage temperature and humidity: -10 ℃ to 60 ℃ <70% R.H.
Display: 3 1 / 2 digit display
Power Supply: 1 9V battery
Dimensions: 240mm (L) x68mm (W) x25mm (H)
Weight: 215g
Annex: leather, test sticks, batteries, manual, wind-ball
Metronome Alternative voices, machinery, wooden fish three kinds of sound time clock function allows you to
exercise reasonable control of the time can freely adjust the volume Large LCD display
Feeler Gauge Stainless steel thickness 0.4mm, radius of arc-bit 3mm
Standard: EN71-1
Bending Testing Plywood (ASTM,EN) It is used for test the toys from the increase in rigid or fixed form of the metal wire or other metal materials
used in the bending (or abuse),
,if because of the risk of fracture resulting from a sharp edge or sharp edge of the prominence
。it is toy misuse testing item.
Standard :ASTM963
Direct current field Gauss Meter Easy to use, simple operation, is KANETEC through the production of magnetic products accumulated in
the course of experience and success developed a manual test electronic display type Gauss Meter.In
addition to the original features, the new models to increase the output of the RS232 interface, can also
buy cable will determine the data transfer to a personal computer.
indicate range 0-1500MT
Model TM-701 (with RS232 output port)
DC, AC magnetic beam density
Unit MT / G-cut alternative; 1T = 10000G
Measurement mode decomposition can indicate the accuracy of determination of the scope
DCX1 0-200mT 0.1mT ±5%
200.1-1500mT 1mT ±5%
DCX10 0-150mT 0.01mT ±5%
ACX10 0-200mT 0.1mT ±5%
0-75mT 0.01mT ±5%
five digits LCD display
Forms Check the numbers
Polarity level
Function of zero-level
Max Auto Power Off
Temperature 0 - +40 ℃
Power 1.5Vx4
Volume size 140 × 64 × 30mm
Standard Accessories probe, batteries, soft leather bag
2m / s Impact test machine 1Comply with EN71 Standard
2. impact speed: 2m / s
3.impact stroke: 2m
4. one testing load comply with EN71 standard
5. using speed table control, there is only one speed.
6. Dimensions: L4.5m × W1.8m × 2m
7. Power: 220V/50Hz 6A
Item Name: Index Moisture Meter
Item No. TW-208
To determine the moisture content percentage of fibre, yarns and fabrics, natural, syntheti
cs and blends supplied with 3 probes for fibre, yarn and fabric, blend conversion charts and
carrying case (battery operated).
Resolutions 0.1
Precision:±(0.5%n+1)
Temperature:-10~60℃
Power supply: 4 pieces battery
Dimension :178X68X39mm
Item Name: Durawash Washing Machine
Item No TF-006
Simulate the conditions to meet leading chain stores standard garment and fabric durability
tests.
Features
Multi range timer with audible end of cycle alarm and
Automatic agitator shut off
Temperature indication and control with accuracy of +/-0.25% of controller range
Push button tank drainage with inline filter to a magnetically coupled drain pump for
reliability.
top related