irwin laser line

LASER GENERATOR

SONAR MEASURE

STUD FINDER

SWIVEL BASE

LASER LINE GENERATOR

Inset lighting... Laying floor or ceiling tiles... Fall pipes...

Dado Rails... Through holes or over uneven surfaces...

Wallpapering...

APPLICATIONS

650 nm Projection diode (Class III)

New lens to project energy in a tighter path

Projects a clear 6 or 10 metre laser beam

Nylon reinforced case for tough environments

Packaging reduction

SPECIFICATIONS

Lens Cover:On-off switch

Twin levelling

Vials

Recessed

Rubber Grip

Self retractin

gpushpins

High Impact

ABS Casing

Alignment

notch

Perfect for applications wherean accurate line is required e.g..Laying conduit, copper piping,tiling, shelving & decorating.

Special Lens – allows linecontinuity over imperfectsurfaces & obstacles, e.g..Dado rails, mouldings, trims& picture frames.

Twin levelling vials for both horizontal& vertical positioning

Twin push-pins allow quick & accurateattachment to many surfaces

PRODUCT FEATURES

LASER LINE GENERATOR

ACCURACYAccuracy +/- 0.2% at 6m.

HORIZONTAL/VERTICALNot limited to horizontal/vertical applications.BATTERIESUp to 60 hours continuous use on 2 AA 1.5 volts alkaline batteries.INDOOR USERecommended for indoor use only.

10,000 HOURSEstimated working life 10,000 hours.

SPECIAL LENSWill skip over imperfections,small moldings and unevensurface (up to 6 mm).

SONIC MEASURE

SONIC MEASURE

APPLICATIONThe Sonic Measure quicklytakes a measurement from61cm to 15.2m.

Measures from the back ofThe Sonic Measure.

Calculates distance, squarefootage/metre and volume.

Ideal for room dimensions, landscaping, HVAC volumerequirements, real estatework, material estimates and more.

LCD DISPLAYDistance is shown on aneasy-to-read LCD screen.

ON/OFFSwitch on the Sonic Measure by pressing READ.Switches off automatically Íf not used for 30 seconds.DYNAMIC READReads while holding theREAD key.

BUTTONSLarge, highly intuitive function buttons guide users through the measuring process.

Functions as follows:

ReadConversion ft/mMemoryMemory recallCalculation of areaCalculation of volumeAddition

SONIC MEASURE

RESETTo reset the Sonic Measureafter calculation of area orvolume just hold down the read button.

MEASUREMENTMeasurement is shown infeet/inches or metric withan accuracy of 99.5%.

BATTERYUses a 9 Volt battery (notincluded).

LASER DOTLaser dot marks target.

laser pointer

memory input key

two row lcd display

memory recall key

volume computation keyarea computation

keyaddition key

on/ read key

ultrasonic sensor aperture

battery compartment

conversion key

SONIC MEASURE LAYOUT

STUD FINDERSTUD FINDER

Finds’ wood and metal studs

3.8 cm deep sensing mode

Latest chip technology (ASICS Chip)

9 Volt Battery! (Battery not included)

Can be operated independently or with Laser Level

SPECIFICATIONS

STUD FINDER

ON/OFFBackside on/off switchand instant on/offoperation with surface contact.

FIXTUREPossibility to combine LaserLine Generator with StudFinder to identify the courseof the stud.

MARKINGPress the yellow button and asmall pin on the backside willlocate stud position. Eliminatesneed for pencil mark.

AUTO CALIBRATIONWhen the Stud Finder isswitched on, it will calibrateautomatically upon contactwith wall surface.

Possibility to combine laser level with stud finder to identify the course of the stud

Easy fastening mechanism

ADDING VALUE

SWIVEL BASE

Swivel BaseNon-marking of surfaces

3M Command swivel base. Holds on strongly and comes off cleanly Hands free use! With 360 degree rotation with swivel feature to increase laser line density/visibility or laser beam length

SPECIFICATIONS

Swivel Mechanism

Alignment Notch

6 Adhesive Strips = 6 Applications

For Laser Level Fastening Mechanism

PRODUCT FEATURES

360 degree rotation of laser level without remounting Swivel feature increases laser line density/visibility or laser beam length (up to 18 m)

Easy fastening mechanism

SWIVEL BASE

PACKAGING Sealed clamshell design

Attention grabbing graphics communicate use

Ideal for cross merchandising

Self standing packaging design

Cut case display shippers

Promotion

Laser Level and Swivel Adhesive Base Combo

Includes 2, six use adhesive strips (12 applications)

Free protective case

PROMOTION SET 1

Laser Level, Swivel Adhesive Base andStud Finder ComboIncludes 2, six use adhesive strips (12 applications)Free protective case

PROMOTION SET 2

Internet Support

www.strait-line.com