inverpul specialties *inverpul epoxy primer anticorrosive
Post on 12-Jan-2016
251 Views
Preview:
TRANSCRIPT
Inverpul SpecialtiesInverpul Specialties
*INVERPUL EPOXY PRIMER ANTICORROSIVE
*INVERPUL EPOXY PRIMER ANTICORROSIVE
Inverpul SpecialtiesInverpul Specialties
Thermosetting powder with epoxy resins cured with a fit hardener,containing special anticorrosive pigments, zinc metallic free. Theproduct is used for anticorrosive protection of metal structures, mainly on sand blasted to the Sa 2½-3 grade supports, like aprimer (thickness 50-70 Micron) before further coating with InverpulPolyester or Epoxypolyester powder and 2K liquid enamel likeInverplast and Inverpur.
GENERAL FEATURES
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Inverpul SpecialtiesInverpul Specialties
Result after 1 year of exposure in industrial environment
Support used: Sand blasted steel Sa 2½
grade
Cycle with Polyester Extra 120 m in all
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Inverpul SpecialtiesInverpul Specialties
Results after 750 hours of salt spray test
Competitor zinc rich Primer
Inver Primer
Cycle with Polyestere Extra
120 m in all
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Results after 750 hours of salt spray test (comparison among Inver epoxy primer with zinc phosphates and
competitors zinc rich primers)
Competitor 1 Competitor 2 Inver
Competitor 3
Cod. 87130*INVERPUL EPOXY PRIMER FZ GREY
Cod. 87130*INVERPUL EPOXY PRIMER FZ GREY
Support used: Sand blasted steel
Sa 2½ grade
Inverpul SpecialtiesInverpul Specialties
Principal differences between a rich zinc primer (competitors) and the cod. 87130 Inver
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Cod. 87130*INVERPUL EPOXY PRIMER
ANTICORROSIVE
Competitors Inver
Tap bulk density
1,4 0,675
Yield at 1 m 365 m2 675 m2
(+ 85%)
Salt spray test on
smooth steel (250 h)
No adhesion Good resistance
top related