intrusion devices – new and emerging technology in worker safety presented by: ken kochevar fhwa...

Intrusion Devices –New and Emerging Technology

in Worker Safety

Presented by:

Ken Kochevar

FHWA Safety/ITS Specialist

(916) 498-5853

ken.kochevar@fhwa.dot.gov

If They Only Knew It Was Coming!

Intrusion Devices –New and Emerging Technology

in Worker Safety

• Introduction and Background

• Description of Products– Reasons for Use– Benefits of Use– Applicable Uses– Specifications

U.S. and California Statistics1998 – 2001 Work Zones

U.S. Fatalities/Injuries CA Fatalities/Injuries

1998: 772/39,000 1998: 68/1218

1999: 872/51,000 1999: 112/1235

2000: 1093/52,000 2000: 121/1389

2001: 1026/53,000 2001: 110/1436

Reasons for Fatality/Injury Increases ???

• Increase in Nightwork

2550

2600

2650

2700

2750

2800

1998 1999 2000 2001

VMT (Million)

• Increase of VMT

• Lack of Consistency

• Distracted Driver

SAFETY LINE SL-D12 WORK-ZONE INTRUSION

ALARM

SAFETY LINE SL-D12OVERVIEW

SAFETY LINE SL-D12 OPERATION

OPEN LANE

RECEIVER & ALARM

TRANSMITTER

WORK CREW

SAFETY LINE SL-D12 LIGHTWEIGHT

SAFETY LINE SL-D12 TRANSMITTER AND

RECEIVER

TRANSMITTER RECEIVER

SAFETY LINE SL-D12 SPECIFICATIONS

Cost $4,000/pr.

Range 1000 Feet

Power Supply 12 Volt DC

Battery Type Sealed Gel Cell (3 day life)

Operating Temperature -40 to +65° C / -40 to +140°F

Siren Level 147+ dB Air Horn at 30 feet

Infrared Source Pulsed infrared beam with background noise suppression

Weight 21 lbs each

SAFETY LINE SL-D12 OPTIONS

Strobe Light Strobe activates when unit is triggered.

Solar Charging System Transmitter and Receiver equipped with Solar Panels.

Remote Siren Receiver equipped with a wired siren that can be placed closet to workers.

Multi Link Used to daisy chain several units together to protect longer distances.

Base Weights Recycled Rubber bases add weight to prevent vibrating or blowing out of alignment.

SAFETY LINE SL-D12BENEFITS

- Low impact rating of 5 mph.

- Clasified as Category I device under NCHRP350.

- Quick and easy setup.

- Length of coverage.

Road-Tech Safety Services, Inc.Road-Tech Safety Services, Inc.

• Contact us at:Contact us at: roadtech@directcon.net ORroadtech@directcon.net OR

Road-Tech Safety Services, Inc.Road-Tech Safety Services, Inc.P.O. Box 2286P.O. Box 2286Elk Grove, CA 95759-2286Elk Grove, CA 95759-2286(530) 676-7797(530) 676-7797

Joe JeffreyJoe Jeffrey

SAFETY LINE SL-D12

The SonoBlaster!®

‘Dual Alert™’

Work Zone

Intrusion Alarm

The SonoBlaster!® Solution

A New Concept in Work Zone Intrusion Alarms

• Alerts BOTH Workers and Drivers

• Pinpoints the Source of Oncoming Danger

• Provides Multiple Warnings

• Uses No Electrical Power

• As Easy to Deploy as Setting a Traffic Cone

• Light Weight, Economical, Long Life Units

How the SonoBlaster!® Works

• SonoBlaster Alarm Units Mount to Individual Traffic Cones

• Upon Impact, Units ‘Sound-Off’ at Over 125 dB for 15 Seconds

• Each Unit Operates Independently

• Powered by Safe, Reliable CO2 Cartridges

The SonoBlaster!®‘Dual Alert™’• Notifies Workers:

– Provides advance warning to workers allowing them the opportunity to move out of harm’s way.

– The alarm sound pinpoints the source of danger.

• Notifies Drivers:– Each SonoBlaster cone sounds a 125+ dB alarm.

– Alerts drowsing or distracted drivers.

– Drivers can respond by braking or steering out of the work zone – or both.

– Modern cars and SUV’s can stop in 120 to 150 feet.

New Technology

The SonoBlaster!® overcomes

objections found in prior intrusion alarms:• Needs no electrical power to require

maintenance, recharging or ‘go dead’.• Critical unit alignment not required as

with beam or other type devices.• No receiver unit required – each unit operates

independently.• SonoBlaster holds multiple U. S. Patents

Preparing & Cocking the Unit

• Simple Unit Setup Steps:Push the cocking rod into the

end of unit, cocking the unit.Twist-on the CO2 cartridge in

the cartridge holder.

• Visual Status Indication– View the status indicator

through the clear window

Arming the SonoBlaster!®

• Arming the SonoBlaster Unit for Activation:– Lifting the activating arm sets the unit

for action. With the handle lifted, the SonoBlaster alarm will trigger upon tilt or impact.

– Lowering the arm puts the SonoBlaster into ‘Safe Mode’ where it is safe to handle, move, store and nest with other cones.

• Automatic Safety– Nesting a SonoBlaster cone with any other cone

will lower the activating handle and automatically disarm the unit.

SonoBlaster!® Work Zone Deployment

• SonoBlaster units can be deployed and retrieved from a cone truck the same as standard traffic cones.

• The position of the unit’s activating arm near the top of the cone allows a “cone setter” to easily disarm a unit prior to lifting it off the roadway.

SonoBlaster!® Activation

• Shock Activation – The unit fires upon direct vehicle impact.

• Tilt Activation – The unit fires when tilted 90 degrees from vertical.

• Stability – The SonoBlaster is resistant to normal roadway harmonics and vibration.

Typical SonoBlaster!® Layout

• A Typical 100 Yard SonoBlaster Protection Zone.

• Cone Spacing = Approximately 20 Feet Apart.

• Requires only 17 SonoBlaster Equipped Cones.

• Can provide up to 5 seconds or more advance warning - depending on vehicle speeds in the Work Zone.

• Additional time is afforded if errant vehicle driver begins braking.

Combination Layout

• SonoBlaster equipped drums and cones here are used in conjunction with an ongoing line of drums.

SonoBlaster!® Intra-Work Zone Use

• Audibly pinpoints the source of danger.

• Prevents equipment from backing over workers.

• Affords assistance that ‘Back-Up Alarms’ fail to provide.

Accidents Within a Work Zone involving workers injured by their own equipment is a growing problem:

• SonoBlasters define heavy-equipment work boundaries within a work zone separating workers from equipment.

SonoBlaster!® Applications

SonoBlasters work with:• Traffic Cones• Drums• Large Base Delineators• A-Frames • Type III Barricades • Security Fences• Manhole Guards• More...

SonoBlaster!® Uses• Construction Sites

• Flagger Protection

• Stripping & Marking Operations

• Bridge Inspection & Repair

• Paving & Grading Operations

• Joint & Crack Sealing

• Survey Crew Protection

• Patching & Pot Hole Repairs

• Signal & Sign

Maintenance

• Equipment Unloading

• Intra-Work Zone

Protection

• Grade Crossing Repairs

• Aerial Platform Work

• Pedestrian / Bike

Protection

Beneficial SonoBlaster!® Users

• DOTs

• Counties

• Municipalities

• Road Builders & Pavers

• Construction Contractors

• Utility Companies

• Maintenance Crews

• Surveyors

SonoBlaster!® Technical Specifications

• Sound Level 125+ dB @ 6 feet

80+ dB @ 300 feet

• Alarm Duration 15 Seconds

• Size 10” wide by 20” tall

• Unit Weight 3 lbs.

• Angle of Activation 90 Degrees

• Temperature Range -30 to +120 F.

• CO2 Cartridge Size 12 Grams

• Cartridge Shelf Life Indefinite

Specifications Subject to Change Without Notice

The The SonoBlaster!® Work Work Zone Intrusion AlarmZone Intrusion Alarm

• NCHRP 350 Testing Trials currently in progress.

TheThe SonoBlaster!® is a product of:is a product of:

PaediaPaedia499 Carolina Street499 Carolina Street

San Francisco, CA 94107San Francisco, CA 94107

415-861-8097415-861-8097

415-861-6683 Fax415-861-6683 Fax

info@paedia.com info@paedia.com www.sonoblaster.comwww.sonoblaster.com

© 2002 Paedia

Drums and Delineators Courtesy of Plastic Safety Systems, Inc.- Cleveland, OH052202052202

Wireless Warning ShieldWireless Warning Shield

Innovations From

Logic Systems, Inc.Logic Systems, Inc.

What Is It for?What Is It for?

• The Wireless Warning Shield (WWS) was created to help prevent injuries and save lives by giving road construction workers as much warning as possible of vehicles encroaching in the “Cone Zone”.

Wireless Warning ShieldWireless Warning Shield

• Vehicle strikes a TCD equipped with the PRT-PRT-300.300.

• A “Radio Chain Reaction”“Radio Chain Reaction” occurs.

• All receivers within range of any PRT-300PRT-300 will sound off.

• Workers react to the danger coming their way.

How It Works!How It Works!Wireless Warning ShieldWireless Warning Shield

The Building BlocksThe Building Blocks

• PRT-300 repeating transceiver.

• Several styles of receivers and warning devices.

Wireless Warning ShieldWireless Warning Shield

PRT-300 Transmitter/RepeaterPRT-300 Transmitter/Repeater

Wireless Warning ShieldWireless Warning Shield

Receivers and Warning DevicesReceivers and Warning Devices

Wireless Warning ShieldWireless Warning Shield

AR-100 *Area AlarmAR-100 *Area Alarm

• The AR-100 is designed as the overall group alarm. When triggered it emits a 125+ dB signal.

Wireless Warning ShieldWireless Warning Shield

PBA-100 Personal Body AlarmPBA-100 Personal Body Alarm

• The PBA-100 is Zone selectable so one person can use it at different sites. It has an extremely loud alarm and strong vibrator.

Wireless Warning ShieldWireless Warning Shield

PHA Personal Headphone AlarmPHA Personal Headphone Alarm

• The PHA is designed to be used by persons that would not be able to hear or feel a Personal Body Alarm.

Wireless Warning ShieldWireless Warning Shield

Competitive AdvantagesCompetitive Advantages

• Does not have the distance and direction limitations of sound only systems.

• Transmission distance is up to 300 feet from any TCD with a working transceiver.

• Unlimited number of receivers can be used.• Multiple receiver types to fit applications.

Wireless Warning ShieldWireless Warning Shield

Competitive Advantages Cont.Competitive Advantages Cont.

• Rugged construction!• Ability to have multiple Zones.• Processor functions allow for fewer false triggers

from heavy vibrations.• Can mount on almost any type of traffic control

device.• Low cost!

Wireless Warning ShieldWireless Warning Shield

PRT-300 SpecificationsPRT-300 Specifications

Wireless Warning ShieldWireless Warning Shield

Coding Format: Channel encoding via custom processorCoding Format: Channel encoding via custom processor

Transmission Frequency: 916.5 MHZ Transmission Frequency: 916.5 MHZ

Transmission Range: Up to 300’Transmission Range: Up to 300’

Power Supply: 2 AA batteries, photocell assistPower Supply: 2 AA batteries, photocell assist

Battery Life: Approx. 8-12 months (calculated)Battery Life: Approx. 8-12 months (calculated)

Operational Temperature Range: 0-70C Operational Temperature Range: 0-70C

Unit Cost: Price $50.00 each Unit Cost: Price $50.00 each (target)(target)

Dimensions: 3.5 x 2.5 x .75 in. Dimensions: 3.5 x 2.5 x .75 in. (target)(target)

Current StatusCurrent Status

• The WWS is currently in the last stages of development.

• Physical testing of the concepts and sensors have been successful.

• Packaging is in development and should be complete within 3-6 months.

• Field testing to begin shortly after.

Wireless Warning ShieldWireless Warning Shield

Logic Systems, IncLogic Systems, Inc

• Contact us at:Contact us at:

www.lsione.com OR

Logic Systems, Inc.Logic Systems, Inc. 8360 Rovana Circle Suite 38360 Rovana Circle Suite 3

Sacramento, CA 95828Sacramento, CA 95828

(916) 387-5661(916) 387-5661

Craig Nelson craig@lsione.com Craig Nelson craig@lsione.com – PresidentPresident

Wireless Warning ShieldWireless Warning Shield