introduction 100609094516 phpapp01
Post on 26-Oct-2014
14 Views
Preview:
TRANSCRIPT
1
TABEL OF CONTENTS
PACKAGES
INTRODUTION
HISTORY
Function of Quality Department
International Organization for Standardization (ISO)
ISO 9000 ISO 14000
Implementation in Packages
Problems in implementation of ISO Standards Cost Benefits of ISO implementation
Auditing
Internal Audits External Audit
References
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
2
PACKAGES LIMITED
Introduction
Established in 1956 as a joint venture between the Ali Group of Pakistan and Akerlund and
Rausing of Sweden, Packages Limited provides premium packaging solutions for exceptional
value to individuals and businesses. We are the only packaging facility in Pakistan offering a
complete range of packaging solutions including offset printed cartons, shipping containers
and flexible packaging materials to individuals and businesses world-wide. Our clientele
includes illustrious names such as Unilever and Pakistan Tobacco Company, who have been
our customers for over 50 years. We employ over 3000 people and had sales of over US $
100 million in 2004.
Listed on all three stock exchanges in Pakistan, Packages Limited has maintained a long-time
credit rating of AA. Our joint ventures and business alliances with some of the world's
biggest names reflect our forward-looking strategy of continuously improving customer value
through improvements in productivity.
Packages has always been at the forefront of new developments in packaging research and
has pioneered several innovations, including the use of wheat straw as a raw material for
paper and board manufacture. Our on-site paper and board mill, established in 1968, has
constantly increased its production capacity. A new plant with even greater capabilities is
planned for the near future.
Our people are our greatest asset. We seek and retain people who feel there is no compromising on excellence, and a corporate culture in which our family can grow and thrive. Heading our multi-talented team is our leadership of experienced senior management. Together, we know how to combine our skills and knowledge to deliver state-of-the-art solutions to our customers.
BOARD OF DIRECTORS
Towfiq Habib Chinoy
(Chairman) Syed Hyder Ali
(Managing Director)
Syed Aslam Mehdi Shamim Ahmad Khan
Khalid Yacob Mujeeb Rashid
Matti Ilmari Naakka Syed Shahid Ali
Shahid Aziz Siddiqui Tariq Iqbal Khan
ADVISOR
Syed Babar Ali
COMPANY SECRETARY
Adi J. Cawasji
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
3
EXECUTIVE COMMITTEE
Syed Hyder Ali - Chairman
Syed Aslam Mehdi - Member
Khalid Yacob - Member
Mujeeb Rashid - Member
AUDIT COMMITTEE
Shamim Ahmad Khan - Chairman
(Non-Executive Director)
Tariq Iqbal Khan - Member
(Non-Executive Director)
Syed Shahid Ali - Member
(Non-Executive Director)
Syed Aslam Mehdi - Member
(Director & General Manager)
Adi J. Cawasji – Secretary
BUSINESS STRATEGY COMMITTEE
Syed Hyder Ali - Chairman
Mujeeb Rashid - Member
Syed Aslam Mehdi - Member
Khalid Yacob - Member
SYSTEM & TECH. COMMITTEE
Mujeeb Rashid - Chairman
Khalid Yacob - Member
Suleman Javed - Member
History
Over the years,
Packages has continued to enhance its facilities to meet the growing demand of packaging
products.
The Bulleh Shah Project:
Packages is planning to relocate its paper manufacturing facilities from the existing location,
which has limited capacity for expansion, to a new site 54 km from the present one. This will
enable us to radically increase our paper and paperboard production from 100,000 to 300,000
tones per year. The packaging operation shall continue concurrently at the Lahore site.
In 2007-09, the company also invested in a new 35000 tons tissue paper machine which
commenced commercial production in 2008
In 2005, the company embarked upon its paper and board expansion plant at a new site
almost tripling its capacity from the current 100,000 tons per annum to 300,000 tons per
annum.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
4
In 2003,Packages entered into an agreement with Vimpex of Austria to provide management
and technical assistance to help in the operation, production optimization and capacity
expansion of a paperboard mill in Syria. A team from Packages is currently providing these
services and is close to optimizing mill production.
In 1999-2000, Packages Limited successfully completed the expansion of the flexible
packaging line by installing a new rotogravure printing machine and expanded the carton line
by adding a new Lemanic rotogravure inline printing and cutting creasing machine. A new 8-
color Flexographic printing machine was also installed in the Flexible Business Unit in 2001.
Packages Limited has also started producing corrugated boxes from its plant in Karachi from
2002.
In 1996, a joint venture agreement was signed with Printcare (Ceylon) Limited for the
production of flexible packaging materials in Sri Lanka. Packages Lanka (Private) Limited
commenced production in 1998. Packages Limited now owns 79% of this company.
In 1994, Coates Lorilleux Pakistan Limited, in which Packages Limited has 55% ownership,
commenced production and sale of printing inks.
In 1993, a joint venture agreement was signed with Mitsubishi Corporation of Japan for the
manufacture of Polypropylene films at the Industrial Estate in Hattar, NWFP. This project,
called Tri-Pack Films Limited, commenced production in 1995 with equity participation by
Packages Limited, Mitsubishi Corporation, Altawfeek Company for Investment Funds, Saudi
Arabia and the public. Packages Limited owns 33% of Tri-Pack Films Limited's equity.
Since 1982, Packages Limited has had a joint venture with Tetra Pak International in Tetra
Pak Pakistan Limited to manufacture paperboard for liquid food packaging and to market
Tetra Pak packaging equipment.
Packages commissioned its own paper mill with a production capacity of 24,000 tonnes in
1968. The mill produces paper and paperboard based on waste paper and agricultural by-
products like wheat straw and river grass. With growing demand the capacity was increased
periodically and in 2003 was nearly 100,000 tons per year.
Function of Quality Department
Quality Policy
We at Packages Limited are committed to producing quality products which conform to our customer requirements and strengthen our position as a quality-managed company. Our pledge is to provide the market with the best quality products at competitive prices through a customer-driven and service-oriented, dynamic management team. To meet this obligation, the company will continue updating skills of its employees by training, acquisition of new technology, and regular re-evaluation of its quality control and assurance systems. Appropriate resources of the company will be directed towards achieving the quality goals through employee participation.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
5
QUALITY FOCUS
Manufacturing top quality products has always been our top priority. To achieve this, we have implemented sound engineering policies which we are constantly improving. Today, our idea of processes includes not only manufacturing policies but also business and management processes. Supporting these processes are stringent quality assurance procedures and a comprehensive system of internal audits
HIGHLIGHTS
Our organization complies with the ISO 9001 standard Packages was the 6th company in Pakistan to adopt the ISO series as its quality
standard We have 57 Quality Improvement Teams in various departments to ensure continuous
improvement focus in the organization Key performance indicators (KPI) concept: Each division in the company sets
SMART (specific, measurable, achievable, recordable and time-based) targets for the annual improvement of its key process parameters, reviewed by the management every quarter
We have a comprehensive set of engineering tools, rules, processes, training materials, guidelines, best practices and other supporting documents to make sure our products comply with every possible customer requirement.
ISO 19001:2000: Business Unit Flexible (BUF) in 1995
Business Unit Carton (BUC) in 1997
Consumer Products Division (CPD) & Tissue Line (TL) in 1998
Business Unit Corruwall Products (BUCP) in 1999
Pulp, Paper and Board Mill (PBM) in 1999
ISO 14001:2004:
PBM in 2006
BUF, BUC, CPD, TL and BUCP in 2007
Food Safety & Hygiene Systems (HACCP):
BUF in 2007
BUC in 2008
CONTINUOUS IMPROVEMENT
The first ISO 9001 certification in 1995 was also made the basis of the ultimate goal of total
quality management. In 2000, the concept of Quality Improvement Teams (QIT) was
introduced in various departments. There are 57 QITs today, working on the Japanese
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
6
principle of continuous incremental improvement called KAIZEN. Their performance is also
monitored quarterly and cash awards and certificates of achievement given to the top
performing team. . . . and what does being ISO certified mean?
Enhanced product quality and reliability at a reasonable price
Greater compatibility and interoperability of goods
Simplification for improved usability
Improved health, safety and environment protection.
Reduction of waste.
Increased distribution efficiency and maintenance
International Organization for Standardization (ISO)
Discover ISO
Because "International Organization for Standardization" would have different acronyms
in different languages ("IOS" in English, "OIN" in French for Organisation
internationale de normalisation), its founders decided to give it also a short, all-
purpose name. They chose "ISO", derived from the Greek isos, meaning "equal".
Whatever the country, whatever the language, the short form of the organization's name
is always ISO
Founding
ISO was born from the union of two organizations - the ISA (International Federation
of the National Standardizing Associations),. established in New York in 1926, and
the UNSCC (United Nations Standards Coordinating Committee), established in
1944.
In October 1946, delegates from 25 countries, meeting at the Institute of Civil
Engineers in London, decided to create a new international organization, of which the
object would be "to facilitate the international coordination and unification of
industrial standards". The new organization, ISO, officially began operations on 23
February 1947.
The Founding of ISO, Willy Kuert, Swiss delegate to the London conference in 1946
(from: Friendship among equals)
The Formation of ISO, JoAnne Yates (MIT Sloan School) and Craig Murphy
(Wellesley College)
The early years
In April 1947, a meeting in Paris produced a recommended list of 67 ISO technical
committees, about two-thirds of which were based on previous ISA committees. By
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
7
the early 1950s, ISO technical committees were starting to produce what were known
at the time as “Recommendations”.
The basic idea of postwar international standardization was to derive International
Standards from those already developed nationally, and then to re-implement them
nationally. ISO’s Recommendations were therefore only intended to influence
existing national standards.
The early years, Roger Maréchal, Assistant Secretary-General of ISO, 1964-1979
(from: Friendship among equals)
The first ISO General Assembly was organized in Paris in 1949. It was inaugurated at
a public meeting held in the grand amphitheatre at the Sorbonne University.
As reported by Raymond Frontward, former Director-General of AFNOR, “a full
house, including the President of the French Republic, Vincent Auriol, and the
Director General of UNESCO, Jaime Torres-Bidet, listened to the speeches. Then
came the translations (consecutive of course - simultaneous interpretation had yet to
be invented). In English first, then in Russian …A quiver of curiosity runs through the
enormous assembly.
"Young people today find it difficult to imagine how far we were, at that time, from
the global view that now seems so familiar. The earth was an archipelago of distinct
worlds.”
Standards-related activities, Raymond Frontard, Former Director-General of
AFNOR (from: Friendship among equals)
In the course of the 1950s and 1960s, an increasing number of new ISO member
bodies came from the developing world.
The International Standards developed by ISO are of high value to developing
countries. They offer indeed practical solutions to a variety of issues related to
international trade and technology transfer because they represent a reservoir of
technological know-how and of product, performance, quality, safety and
environmental specifications.
However, to take advantage of International Standards and to participate in their
development, developing countries had to face substantial additional problems in
comparison with industrialized nations, ranging from the lack of established industrial
infrastructures and related technical components (including national standards,
metrology and testing institutions and facilities), to the severe limitation of financial
and technical resources.
The first landmark in ISO’s attempts to respond to the needs of these members was
the establishment in 1961 of the DEVCO Committee on developing country matters
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
8
(initiated on the basis of a memorandum to ISO Council from Mr. F. Hadass of
Israel). Other initiatives followed. In 1967, a developing countries conference was
held in Moscow and in1968 a new category of correspondent member was
established, so that developing countries could play a role in ISO’s work without
incurring the cost of full membership.
A further category of subscriber member was eventually added in 1992, allowing very
small economies to maintain a link with ISO for a minimum fee.
Since the 1960s, the membership and role of developing countries within ISO has
been continuously increasing. In parallel, the attention of the organization to the needs
of developing countries has substantially evolved, along with the undertaking of
programmes providing technical assistance and capacity building and a variety of
initiatives to facilitate developing countries' participation in international
standardization.
ISO Action Plan for developing countries
ISO Online's Resources for ... Developing countries
According to ISO’s first-ever Annual Review in 1972, the underlying causes of the
acceleration of the pace of international standardization included “an explosive
growth in international trade” caused by a “revolution in transportation methods”. By
the mid-sixties a demand, not only a desire, for International Standards had
developed. The sources of this demand included multinational companies, standards
institutions in developing countries and government regulatory authorities.
What had laid the foundation for the growth of the output of ISO during the seventies
was the turn in emphasis from national to International Standards which took place in
the late 1960s.
This change of emphasis was underlined by the decision in 1971 to begin publishing
the results of ISO’s technical work as International Standards rather then
Recommendations.
The expansion of ISO, Olle Sturen, Secretary-General Emeritus of ISO (from:
Friendship among equals
Members
ISO has 163 national members, out of the 203 total countries in the world.
ISO has three membership categories:
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
9
Member bodies are national bodies that are considered to be the most representative standards body in each country. These are the only members of ISO that have voting rights.
Correspondent members are countries that do not have their own standards organization. These members are informed about ISO's work, but do not participate in standards promulgation.
Subscriber members are countries with small economies. They pay reduced membership fees, but can follow the development of standards.
Participating members are called "P" members as opposed to observing members which are called "O" members.
ISO 9000
ISO 9000 is a family of standards for quality management systems. ISO 9000 is maintained by ISO, the International Organization for Standardization and is administered by accreditation and certification bodies. The rules are updated, as the requirements motivate changes over time. Some of the requirements in ISO 9001:2008 (which is one of the standards in the ISO 9000 family) include
a set of procedures that cover all key processes in the business; monitoring processes to ensure they are effective; keeping adequate records; checking output for defects, with appropriate and corrective action where necessary; regularly reviewing individual processes and the quality system itself for
effectiveness; and facilitating continual improvement
A company or organization that has been independently audited and certified to be in conformance with ISO 9001 may publicly state that it is "ISO 9001 certified" or "ISO 9001 registered". Certification to an ISO 9001 standard does not guarantee any quality of end products and services; rather, it certifies that formalized business processes are being applied.
Although the standards originated in manufacturing, they are now employed across several types of organizations. A "product", in ISO vocabulary, can mean a physical object, services, or software.
Quality management system
General requirements: The Company documents, implements, and maintains a quality management system and continually improves its effectiveness in accordance with the requirements of the ISO 9001:2008 International Standard. (BBS Holdings Limited):that comprises of; . Guard Dog Security Services Ltd
a) determines the processes needed for the quality management system and their application throughout Packages, b) determines the sequence and interaction of these processes, c) determines criteria and methods needed to ensure that both the operation and control of these processes are effective, d) ensures the availability of resources and information necessary to support the operation
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
10
and monitoring of these processes, e) monitors, measures where applicable and analyzes these processes, f) implements actions necessary to achieve planned results and continual improvement of these processes.
These processes are managed by Packages in accordance with the requirements of the ISO 9001:2008 International Standard. Where Packages chooses to outsource any process that affects product conformity with requirements, Packages ensures control over such processes. The type and extent of control of such outsourced processes are identified within the quality management system.
NOTE: Processes needed for the quality management system referred to above include processes for management activities, provision of resources, product realization, measurement, analysis, and improvement.
Documentation requirements
General
The quality management system documentation includes: a) documented statements of a quality policy and quality objectives, b) a quality manual, c) documented procedures and records required by the ISO 9001:2008 International Standard, and d) documents, including records determined by Packages to be necessary to ensure the effective planning, operation and control of its processes NOTE 1: Where the term “documented procedure” appears within the ISO 9001:2008 International Standard, means that a procedure is established, documented, implemented and maintained. NOTE 2: Documentation can be in any form or type of medium.
Management responsibility
Management commitment
Top management is committed to the development and implementation of the quality management system and continually improves its effectiveness by: a) communicating to Packages the importance of meeting customer as well as statutory and regulatory requirements, b) establishing a quality policy, c) establishing quality objectives, d) conducting management reviews, and e) ensuring the availability of resources.
Customer focus Top management ensures that customer requirements are determined and are met with the aim of enhancing customer satisfaction.
Quality policy “Packages is committed to Exceeding Customer Expectations through Implementation and Continuous Improvement of our Quality Management System. Absolute Customer Satisfaction is the expectation and, will be achieved through supplying a Superior Product, On-time, at a Competitive Price.” Top management ensures that the quality policy a) is appropriate to the purpose of the quality policy, b) includes a commitment to comply with
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
11
requirements and continually improve the effectiveness of the quality management system, c) provides a framework for establishing and reviewing quality objectives, d) is communicated and understood within Packages, and e) is reviewed for continuing suitability.
Planning
Quality objectives Top management ensures that quality objectives, including those needed to meet requirements for product, are established at relevant functions and levels within Packages. The quality objectives are measurable and consistent with the quality policy. 1. Meet or exceed customer expectations by effective communication and review of customer requirements. 2. Provide our customers high quality products and services, on time delivery, and at a reasonable cost. 3. Effectively manage our products, processes, and services to provide superior customer satisfaction. 4. Promote the safety, awareness, and well being of employees through training and education.
Quality management system planning Top management ensures that: a) the planning of the quality management system is carried out in order to meet the requirements given in 4.1, as well as the quality objectives, and b) the integrity of the quality management system is maintained when changes to the quality management system are planned and implemented.
Responsibility, authority and communication
Responsibility and authority Top management ensures that responsibilities and authorities are defined and communicated within Packages to promote effective management of the quality system. An Organizational Chart illustrates the responsibility and relative authority of the personnel who manage, perform, and verify the activities affecting the QMS. Changes to the quality system are planned within the framework of management reviews. These changes may be in response to changing circumstances, such as product, process, capacity, or other operational or organizational changes; or to improve the effectiveness and efficiency of the quality system. Supporting Documentation Organizational Chart
Management representative Top management has appointed a member of the organization’s management who, irrespective of other responsibilities, has the responsibility and authority that includes a) ensuring that processes needed for the quality management system are established, implemented and maintained, b) reporting to top management on the performance of the quality management system and any need for improvement, and c) ensuring the promotion of awareness of customer requirements throughout Packages. NOTE The responsibility of a management representative can include liaison with external parties on matters relating to the quality management system.
Internal communication Top management ensures that appropriate communication processes are established within Packages and that communication takes place regarding the effectiveness of the quality management system.
Management Review
General Top management reviews Packages’s quality management system, at planned intervals, to ensure its continuing suitability, adequacy and effectiveness. The review includes assessing opportunities for improvement and the need for changes to the quality management
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
12
system, including the quality policy and quality objectives. Records from management reviews are maintained Supporting Documentation QOP-56-01 Management Review
Review input The input to management review includes information on: a) results of audits, b) customer feedback, c) process performance and product conformity, d) status of preventive and corrective actions, e) follow-up actions from previous management reviews, f) changes that could affect the quality management system, and g) recommendations for improvement.
Review output The output from the management review includes any decisions and actions related to: a) improvement of the effectiveness of the quality management system and its processes, b) improvement of product related to customer requirements, and c) resource needs.
Resource management
Provision of resources Packages determines and provides the resources needed a) to implement and maintain the quality management system and continually improve its effectiveness, and b) to enhance customer satisfaction by meeting customer requirements.
Human resources
General Personnel performing work affecting conformity to product requirements are competent on the basis of appropriate education, training, skills and experience. 6.2.2 Competence, training, and awareness Packages : a) determines the necessary competence for personnel performing work affecting conformity to product requirements, b) where applicable, provides training or takes other actions to achieve the necessary competence, c) evaluates the effectiveness of the actions taken, d) ensures that its personnel are aware of the relevance and importance of their activities and how they contribute to the achievement of the quality objectives, and e) maintains appropriate records of education, training, skills and experience. (Supporting Documentation QOP-62-01 Competence, Training, and Awareness
Infrastructure Packages determines, provides for, and maintains the infrastructure needed to achieve conformity to product requirements. Infrastructure includes, as applicable: a) buildings, workspace and associated utilities, b) Process equipment (both hardware and software), and c) Supporting services (such as transport, communication or information systems). Supporting Documentation QOP-63-01 Equipment Maintenance
Work environment Packages determines and manages the work environment needed to achieve conformity to product requirements.
Product realization
Planning of product realization
Packages plans and develops the processes needed for product realization. Planning of product realization is consistent with the requirements of the other processes of the quality management system In planning product realization, Packages determines the following, as appropriate:
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
13
a) quality objectives and requirements for the product, b) the need to establish processes, and documents, and provide resources specific to the product, c) required verification, validation, monitoring, measurement, inspection and test activities specific to the product and the criteria for product acceptance, and d) records needed to provide evidence that the realization processes and resulting product meet requirements
b) The output of the planning is in a form suitable for Packagess method of operations.
NOTE 1 A document specifying the processes of the quality management system (including the product realization processes) and the resources to be applied to a specific product, project or contract, is referred to as the quality plan.
NOTE 2 Packages also applies the requirements given in 7.3 to the development of product realization processes. Supporting Documentation
QOP-71-01 Planning of Product Realization
Customer- related processes
Determination of requirements related to the product
Packages determines: a) requirements specified by the customer, including the requirements for delivery and post-delivery activities, b) requirements not stated by the customer but necessary for specified or intended use, where known, c) statutory and regulatory requirements applicable to the product, and d) any additional requirements considered necessary by Packages.
Supporting Documentation QOP-72-02 Order Processing & Review
Review of requirements related to the product
Packages reviews the requirements related to the product. This review is conducted prior to Packagess commitment to supply a product to the customer (e.g. submission of tenders, acceptance of contracts or orders, acceptance of changes to contracts or orders) and ensures that: a) product requirements are defined, b) contract or order requirements differing from those previously expressed are resolved, and c) Packages has the ability to meet the defined requirements.
Records of the results of the review and actions arising from the review are maintained Where the customer provides no documented statement of requirement, the customer requirements are confirmed by Packages before acceptance. Where product requirements are changed, Packages ensures that relevant documents are amended and that relevant personnel are made aware of the changed requirements.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
14
Customer communication
Packages determines and implements effective arrangements for communicating with customers in relation to:
a) product information, b) enquiries, contracts or order handling, including amendments, and c) customer feedback, including customer complaints.
Supporting Documentation QOP-72-02 Order Processing & Review QOP-85-02 Customer Complaints
Design and development Excluded
Purchasing
Purchasing process Packages ensures that purchased product conforms to specified purchase requirements. The type and extent of control applied to the supplier and the purchased product is dependent upon the effect of the purchased product on subsequent product realization or the final product. Supporting Documentation QOP-74-01 Purchasing
Purchasing Information
Purchasing information describes the product to be purchased, including where appropriate a) requirements for approval of product, procedures, processes and equipment, b) requirements for qualification of personnel, and c) quality management system requirements.
Packages ensures the adequacy of specified purchase requirements prior to their communication to the supplier. Supporting Documentation QOP-74-01 Purchasing
Verification of purchased product
Packages establishes and implements the inspection or other activities necessary for ensuring that purchased product meets specified purchase requirements. Where Packages or its customer intends to perform verification at the supplier’s premises, Packages states the intended verification arrangements and method of product release in the purchasing information.
Supporting Documentation
QOP-74-02 Verification of Purchase Product
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
15
Production and service provision
Control of production and service provision
As applicable, Packages plans and carries out production and service provisions under controlled conditions. Controlled conditions include:
a) the availability of information that describes the characteristics of the product, b) the availability of work instructions, as necessary, c) the use of suitable equipment, d) the availability and use of monitoring and measuring equipment, e) the implementation of monitoring and measurement activities, and f) the implementation of product release, delivery and post-delivery activities.
Supporting Documentation
QOP-75-01 Work Order and Production Records
QOP-63-01 Equipment Maintenance
QOP-76-01 Measuring and Monitoring Equipment
QOP-84-02 Final Inspection
QOP-75-06 Shipping
Validation of processes for production and service provision
Packages validates any processes for production and service provisions where the resulting output cannot be verified by subsequent monitoring or measurement and, as a consequence, deficiencies become apparent only after the product is in use or the service has been delivered. Validation demonstrates the ability of these processes to achieve planned results. As applicable, Packages establishes arrangements for these processes including:
a) defined criteria for review and approval of the processes, b) approval of equipment and qualification of personnel, c) use of specific methods and procedures, d) requirements for records and e) revalidation.
Note: Packages has no Special Processes at this time.
Identification and traceability Where appropriate, Packages identifies the product by suitable means throughout product realization. Packages identifies the product status with respect to monitoring and measurement requirements throughout product realization. Where traceability is a requirement, Packages controls the unique identification of the product an maintain records. Supporting Documentation
QOP-75-04 Product Identification and Traceability
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
16
Customer property
Packages exercises care with customer property while it is under Packagess control or being used by Packages. Packages identify, verifies, protects and safeguards customer property provided for use or incorporation into the product. If any customer property is lost, damaged or otherwise found to be unsuitable for use, Packages will report this the customer and maintain records.
Note: Customer property can include intellectual property and personal date.
Note: Packages has no Customer Property at this time.
Preservation of product
Packages preserves the product during internal processing and delivery to the intended destination in order to maintain conformity to requirements. As applicable, preservation includes identification, handling, packaging, storage and protection. Preservation also applies to the constituent parts of a product.
Control of monitoring and measuring equipment
Packages determines the monitoring and measurement to be undertaken and the monitoring and measuring equipment needed to provide evidence of conformity of product to determined requirements. Packages establishes processes to ensure that monitoring and measurement can be carried out, and is carried out in a manner that is consistent with the monitoring and measurement requirements. Where necessary to ensure valid results measuring equipment is:
a)calibrated, verified or both at specified intervals, or prior to use, against measurement standards traceable to international or national measurement standards; where no such standards exist, the basis used for calibration or verification shall be recorded, b)adjusted or re-adjusted as necessary, c)have identification in order to determine it’s calibration status, d)safeguarded from adjustments that would invalidate the measurement result, and e)protected from damage and deterioration during handling, maintenance and storage.
In addition, Packages assesses and records the validity of the previous measuring results when the equipment is found not to conform to requirements. Packages takes appropriate action on the equipment and any product affected. Records of the results of calibration and verification are maintained
Note: Confirmation of the ability of computer software to satisfy the intended application will typically include its verification and configuration management to maintain its suitability for use Supporting Documentation QOP-76-01 Monitoring and Measuring Equipment
Measurement, analysis and improvement
General Packages plans and implements the monitoring, measurement, analysis and improvement processes needed: a)to demonstrate conformity to product requirements, b)to ensure conformity of the quality management system, and c)to continually improve the
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
17
effectiveness of the quality management system. This includes determination of applicable methods, including statistical techniques, and the extent of their use.
Monitoring and measurement
Customer satisfaction As one of the measurements of the performance of the quality management system, Packages monitors information relating to customer perception as to whether Packages has met customer requirements. The methods for obtaining and using this information are determined. Supporting Documentation QOP-82-01 Customer Satisfaction
Internal Audits Packages conducts internal audits at planned intervals to determine whether the quality management system: a)conforms to the planned arrangements to the requirements of ISO 9001:2008 and to the quality management system requirements established by Packages, and b)is effectively implemented and maintained. An audit program is planned, taking into consideration the status and importance of the processes and areas to be audited, as well as the results of previous audits. The audit criteria, scope, frequency and methods are defined. The selection of auditors and conduct of audits ensure objectivity and impartiality of the audit process. Auditors do not audit their own work. The responsibilities and requirements for planning and conducting audits, and for reporting results and maintaining records are defined in a documented procedure. The management responsible for the area being audited ensures that any necessary correction and corrective actions are taken without undue delay to eliminate detected nonconformities and their causes. Follow-up activities include the verification of the actions taken and the reporting of verification results.Supporting Documentation QOP-82-02 Internal
Quality Audits
Monitoring and measurement of processes Packages applies suitable methods for monitoring and where applicable, measurement of the quality management system processes. These methods demonstrate the ability of the processes to achieve planned results. When planned results are not achieved, correction and corrective action is taken, as appropriate.
8.2.4 Monitoring and measurement of product Packages monitors and measures the characteristics of the product to verify that product requirements have been met. This is carried out at appropriate stages of the product realization process in accordance with the planned arrangements (see 7.1). Evidence of conformity with the acceptance criteria is maintained. Records indicate the person(s) authorizing release of product for delivery to the customer (see 4.2.4). The release of product and delivery of service to the customer does not proceed until the planned arrangements (see 7.1) have been satisfactorily completed, unless otherwise approved by a relevant authority and where applicable, by the customer. Supporting Documentation QOP-82-03 In Process Inspections QOP-82-04 Final Inspection
8.3 Control of nonconforming product Packages ensures that product which does not conform to product requirements is identified and controlled to prevent its unintended use or delivery. A documented procedure is established to define the controls and related responsibilities and authorities for dealing with nonconforming products. Where applicable Packages deals with nonconforming product by one or more of the following ways: a)by taking action to eliminate the detected nonconformity, b)by authorizing its use, release or acceptance under concession by a relevant authority and, where applicable, by the customer, and c)by taking action to preclude its original intended use or application. d)by taking action appropriate to the effects,
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
18
or potential effects, of the nonconformity when nonconforming product is detected after delivery or use has started. When nonconforming product is corrected the product is subject to re-verification to demonstrate conformity to the requirements. When nonconforming product is detected after delivery or use has started, Packages takes action appropriate to the effects, or potential effects, of the nonconformity. Records of the nature of nonconformities and any subsequent actions taken, including concessions obtained, are maintained. Supporting Documentation QOP-83-01 Control of Nonconforming Product
Analysis of data Packages determines, collects and analyzes appropriate data to demonstrate the suitability and effectiveness of the quality management system and to evaluate where continual improvement of the effectiveness of the quality management system can be made. This includes data generated as a result of monitoring and measurement and from other relevant sources. The analysis of data provides information relating to:customer satisfaction conformity to product requirements characteristics and trends of processes and products including opportunities for preventive action and suppliers, Supporting Documentation QOP-56-01 Management Review
Improvement
Continual improvement
Packages continually improves the effectiveness of the quality management system through the use of the quality policy, quality objectives, audit results, analysis of data, corrective and preventive actions and management reviews. Supporting Documentation QOP-85-01 Continual Improvement
Corrective action Packages takes action to eliminate the causes of nonconformities in order to prevent recurrence. Corrective actions are appropriate to the effects of the nonconformities encountered. A documented procedure is established to define requirements for: a) reviewing nonconformities (including customer complaints), b) determining the causes of nonconformities, c) evaluating the need for action to ensure that nonconformities do not recur, d) determining and implementing action needed, and records of the results of action taken reviewing the effectiveness of the corrective action taken. Supporting Documentation QOP-85-02 Customer Complaints QOP-85-03 Corrective and Preventive Actions
Preventive action Packages determines actions to eliminate the causes of potential nonconformities in order to prevent their occurrence. Preventive actions are appropriate to the effects of the potential problems. A documented procedure is established to define requirements for: a) determining potential nonconformities and their causes, b) evaluating the need for action to prevent occurrence of nonconformities, c) determining and implementing action needed, d) records of results of action taken and e) reviewing the effectiveness of the preventive action taken. Supporting Documentation QOP-85-03 Corrective and Preventive Actions
1987 version
ISO 9000:1987 had the same structure as the UK Standard BS 5750, with three 'models' for quality management systems, the selection of which was based on the scope of activities of the organization:
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
19
ISO 9001:1987 Model for quality assurance in design, development, production, installation, and servicing was for companies and organizations whose activities included the creation of new products.
ISO 9002:1987 Model for quality assurance in production, installation, and servicing had basically the same material as ISO 9001 but without covering the creation of new products.
ISO 9003:1987 Model for quality assurance in final inspection and test covered only the final inspection of finished product, with no concern for how the product was produced.
ISO 9000:1987 was also influenced by existing U.S. and other Defense Standards ("MIL SPECS"), and so was well-suited to manufacturing. The emphasis tended to be placed on conformance with procedures rather than the overall process of management—which was likely the actual intent.
1994 version
ISO 9000:1994 emphasized quality assurance via preventive actions, instead of just checking final product, and continued to require evidence of compliance with documented procedures. As with the first edition, the down-side was that companies tended to implement its requirements by creating shelf-loads of procedure manuals, and becoming burdened with an ISO bureaucracy. In some companies, adapting and improving processes could actually be impeded by the quality system.
2000 version
ISO 9001:2000 combines the three standards 9001, 9002, and 9003 into one, called 9001. Design and development procedures are required only if a company does in fact engage in the creation of new products. The 2000 version sought to make a radical change in thinking by actually placing the concept of process management front and center ("Process management" was the monitoring and optimizing of a company's tasks and activities, instead of just inspecting the final product). The 2000 version also demands involvement by upper executives, in order to integrate quality into the business system and avoid delegation of quality functions to junior administrators. Another goal is to improve effectiveness via process performance metrics — numerical measurement of the effectiveness of tasks and activities. Expectations of continual process improvement and tracking customer satisfaction were made explicit.
The ISO 9000 standard is continually being revised by standing technical committees and advisory groups, who receive feedback from those professionals who are implementing the standard
ISO 9001:2008 only introduces clarifications to the existing requirements of ISO 9001:2000 and some changes intended to improve consistency with ISO 14001:2004. There are no new requirements. Explanation of changes in ISO 9001:2008. A quality management system being upgraded just needs to be checked to see if it is following the clarifications introduced in the amended version.
ISO 14000
The ISO 14000 is a family of internationally-recognized standards for environmental management systems that is applicable to any business or organization, regardless of size,
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
20
location or income. These standards are developed by the International Organization for Standardization (ISO), which has representation from committees all over the world. The ISO 14000 family includes most notably the ISO 14001 standard, which represents the core set of standards used by organizations for designing and implementing an effective environmental management system. Other standards included in this series are ISO 14004, which gives additional guidelines for a good environmental management system, and more specialized standards dealing with specific aspects of environmental management.
The ISO 14000 environmental management standards exist to help organizations minimize how their operations negatively affect the environment. The major objective of the ISO 14000 series of norms is "to promote more effective and efficient environmental management in organizations and to provide useful and usable tools - ones that are cost effective, system-based, flexible and reflect the best organizations and the best organizational practices available for gathering, interpreting and communicating environmentally relevant information"
It offers a source of guidance for introducing and adopting environmental management systems based on the best universal practices, in the same way that the ISO 9000 series on quality management systems, which is now widely applied, represents a tool for technology transfer of the best available quality management practices. In structure the ISO 14000 series is similar to ISO 9000 quality management and both can be implemented side by side.
ISO 14001
The International Standard ISO 14001 sets out requirements for an Environmental Management System (EMS) which can be employed by an organization to measure and document their environmental impact. EMS’s that meet the ISO 14001 requirements can be externally audited and certified by an accredited Certification Body. The certification body must be accredited by the ANSI-ASQ National Accreditation Board in the USA, the United Kingdom Accreditation Service in the UK, or the National Accreditation Board in Ireland. Certification auditors need to be accredited by the International Registrar of Certification Auditors.
To check whether an organization is ready for certification to ISO 14001 they can use an ISO 14001 Self Assessment Checklist aimed at outlining the required elements.
In 2004, the ISO 14001 standard was updated to reflect changes in environmental consciousness. The updated systematic ISO 14001:2004 approach requires the organization to take a hard look at all areas where its activities have an environmental impact. It can lead to benefits such as the following: reduced cost of waste management, savings in consumption of energy and materials, lower distribution costs, improved corporate image among regulators, customers and the public, and framework for continual improvement of environmental performance.
ISO 14000 series standards
ISO 14001 Environmental management systems—Requirements with guidance for use
ISO 14004 Environmental management systems—General guidelines on principles, systems and support techniques
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
21
ISO 14015 Environmental assessment of sites and organizations ISO 14020 series (14020 to 14025) Environmental labels and declarations ISO 14031 Environmental performance evaluation—Guidelines ISO 14040 series (14040 to 14049), Life Cycle Assessment, LCA, discusses pre-
production planning and environment goal setting. ISO 14050 terms and definitions. ISO 14062 discusses making improvements to environmental impact goals. ISO 14063 Environmental communication—Guidelines and examples ISO 14064 Measuring, quantifying, and reducing Greenhouse Gas emissions. ISO 19011 which specifies one audit protocol for both 14000 and 9000 series
standards together. This replaces ISO 14011 meta-evaluation—how to tell if your intended regulatory tools worked. 19011 is now the only recommended way to determine this
Implementation
The first ISO 9001 certification in 1995 was also made the basis of the ultimate goal of total quality management. In 2000, the concept of Quality Improvement Teams (QIT) was introduced in various departments. There are 57 QITs today, working on the Japanese principle of continuous incremental improvement called KAIZEN. Their performance is also monitored quarterly and cash awards and certificates of achievement given to the top performing team.
The ISo-14000 (EMS) was implemented for environmental protection and to minimize negative effects on environment.ISO-14001-2004 is applied in organization.
Problems in implementation of ISO Standards
There are many problems faced by organization in implementation of ISO standards.
Documentation
A common criticism of ISO 9001 is the amount of money, time and paperwork required for registration. According to Barnes, "Opponents claim that it is only for documentation. Proponents believe that if a company has documented its quality systems, then most of the paperwork has already been completed.
Management Commitment
For implementation of ISO Standards there must be management commitment because there people in organization always adverse in changes. So in there was the problem of management commitment in organization.
Cost
The cost of implementation is main problem in ISO Standards. Because there must be some changes in organization’s structure.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
22
Registration
A common criticism of ISO 9001 is the amount of money, time and paperwork required for registration. Opponents claim that it is only for documentation. Proponents believe that if a company has documented its quality systems, then most of the paperwork has already been completed.
Training
For practice of ISO Standards the organization the employee must be trained and well known to standard. So there is need to train employees to practice ISO Standard in organization which high cost.
Benefits of ISO implementation
Packages plans and implements the monitoring, measurement, analysis and improvement processes needed: a)to demonstrate conformity to product requirements, b)to ensure conformity of the quality management system, and c)to continually improve the effectiveness of the quality management system. This includes determination of applicable methods, including statistical techniques, and the extent of their use.
Customer satisfaction As one of the measurements of the performance of the quality management system, Packages monitors information relating to customer perception as to whether Packages has met customer requirements. The methods for obtaining and using this information are determined. Supporting
Monitoring and measurement of processes Packages applies suitable methods for monitoring and where applicable, measurement of the quality management system processes. These methods demonstrate the ability of the processes to achieve planned results. When planned results are not achieved, correction and corrective action is taken, as appropriate.
Monitoring and measurement of product Packages monitors and measures the characteristics of the product to verify that product requirements have been met. This is carried out at appropriate stages of the product realization process in accordance with the planned arrangements Evidence of conformity with the acceptance criteria are maintained. Records indicate the person(s) authorizing release of product for delivery to the customer release of product and delivery of service to the customer does not proceed until the planned arrangements have been satisfactorily completed, unless otherwise approved by a relevant authority and where applicable, by the customer.
Control of nonconforming product Packages ensures that product which does not conform to product requirements is identified and controlled to prevent its unintended use or delivery. A documented procedure is established to define the controls and related responsibilities and authorities for dealing with nonconforming products. Where applicable Packages deals with nonconforming product by one or more of the following ways: a)by taking action to eliminate the detected nonconformity, b)by authorizing its use, release or acceptance under concession by a relevant authority and, where applicable, by the customer, and c)by taking action to preclude its original intended use or application. d)by taking action appropriate to the effects, or potential effects, of the nonconformity when nonconforming product is detected after
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
23
delivery or use has started. When nonconforming product is corrected the product is subject to re-verification to demonstrate conformity to the requirements. When nonconforming product is detected after delivery or use has started, Packages takes action appropriate to the effects, or potential effects, of the nonconformity. Records of the nature of nonconformities and any subsequent actions taken, including concessions obtained, are maintained
Analysis of data Packages determines collects and analyzes appropriate data to demonstrate the suitability and effectiveness of the quality management system and to evaluate where continual improvement of the effectiveness of the quality management system can be made. This includes data generated as a result of monitoring and measurement and from other relevant sources. The analysis of data provides information relating to: a)customer , b)conformity to product requirements c)characteristics and trends of processes and products including opportunities for preventive action (d)suppliers
Continual improvement
Packages continually improves the effectiveness of the quality management system through the use of the quality policy, quality objectives, audit results, analysis of data, corrective and preventive actions and management reviews.
ISO 14001:2004 is a tool that can be used to meet internal objectives
provide assurance to management that it is in control of the organizational
processes and activities having an impact on the environment
Assure employees that they are working for an environmentally responsible
organization.
ISO 14001:2004 can also be used to meet external objectives:
provide assurance on environmental issues to external stakeholders – such as
customers, the community and regulatory agencies
comply with environmental regulations
support the organization's claims and communication about its own
environmental policies, plans and actions
provides a framework for demonstrating conformity via suppliers' declarations of
conformity, assessment of conformity by an external stakeholder - such as a
business client - and for certification of conformity by an independent certification
body.
Auditing
Two types of auditing are required to become registered to the standard: auditing by an external certification body (external audit) and audits by internal staff trained for this process (internal audits). The aim is a continual process of review and assessment, to verify that the system is working as it's supposed to, find out where it can improve and to correct or prevent problems identified. It is considered healthier for internal auditors to audit outside their usual management line, so as to bring a degree of independence to their judgments.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
24
Internal Audits
Ayesha M.khalid Azeem
(Assistant manager QMS &EHS)
Muhammad Asif
External Audit
Packages have SGS as external audit to oversee implementation of ISO Standard in organization.
SGS Pakistan (Pvt.) Ltd
SGS, a world's leading multinational inspection, verification, testing and certification Company, is recognized as the global benchmark for quality and integrity having a workforce of 53'000 employees and operating a network of over 1 200 offices and laboratories around the world.
References;
1. http://en.wikipedia.org/wiki/International_Organization_for_Standa
rdization
2. http://www.iso.org/iso/about/discover-iso_isos-name.htm
3. Ayesha M.khalid Azeem (Assistant manager QMS &EHS) 4. Muhammad Asif 5. http://www.sgs.com
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
25
Project
On
Packages Ltd
Subject
Total Quality Management
Submitted to;
Prof. Ahamad Usman
Submitted by;
Abdul-Majeed……………………………………………219
M.Shahid…………………………………………………..229
Abdul-Rauf………………………………………………..243
Abdur-Rehman Moeen……………………………………252
Abdul-Wahab Khan……………………………………….259
Mlik Jamshid Awan………………………………………264
Hailey College of Commerce
University of the Punjab, Lahore
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
top related