instruction manual - pcs company home. media assets/gesswein/manuals/5000237...bldc handpiece cord...
Post on 23-Mar-2020
3 Views
Preview:
TRANSCRIPT
Instruction Manualfor
MF TOUCH#500-0237
2
On/Off-typeFootSwitchUsage1. Atanytimeinoperation,theFootSwitchcanbepluggedinthesocketonthe
backsideoftheMFTouch.
2. PleaseadjusttotherequiredspeedbyturningtheOutputControlKnob.
3. WhenusingtheFootSwitch,pleasekeepdepressingittoproduceoutput.
4. TheOutputOn/OffSwitchonthemainunitortouchpanel isNOT
availablewhentheOn/Off-typeFootSwitchisconnected.Pleasedepressthe
FootSwitchtocontroloutput.
VariableFootControl1. Atanytimeinoperation,theVariableFootControlcanbepluggedinthe
socketonthebacksideoftheMFTouch.
2. AftertheVariableFootControlisconnected,thescreenontheupperright
cornerofthepanelwilldisplaythesignal .
3. PleaseadjusttotherequiredspeedbyturningtheOutputControlKnob.
4. Theoutputsettingdisplayonthepanelwillindicatetheoutputlevel,whichis
determinedbythedepressingoftheVariableFootControl.Theoutputpower
(orspeed)willnotexceedthelevelsetbytheOutputControlKnob.
5. WhenusingtheVariableFootControl,pleasekeepdepressingittoproduceoutput.
6. TostopoperatingtheMFTouchwithVariableFootControl,pleasepressthebutton onthepanel,andthentheVariableFootControlwillbedisconnected.
Signal Meaning
VariableFootControlisconnected
VariableFootControlisdisconnected
DisplayofTroublewarningIncaseofabnormaluseoroverload,theoverloadprotectionwillcutofftheoutput
andthetroublesignalwillblink.Pleaseturnthepowerswitchoffandonagainto
recommenceoperation.
TroubleSignal Meaning
DC/BLDChandpiecerotationoverload.
DC/BLDChandpiececableshortcircuit.
Mainunitfailure.
BLDChandpieceisincompatiblewiththeMFTouch.
Mainunitfailure.
BLDChandpieceisstuckornotconnected.
BLDChandpiececordfailure.
Ultrasonichandpiecefailureortoolholderloosed
Ultrasoniccablefailure.
3
On/Off-typeFootSwitchUsage1. Atanytimeinoperation,theFootSwitchcanbepluggedinthesocketonthe
backsideoftheMFTouch.
2. PleaseadjusttotherequiredspeedbyturningtheOutputControlKnob.
3. WhenusingtheFootSwitch,pleasekeepdepressingittoproduceoutput.
4. TheOutputOn/OffSwitchonthemainunitortouchpanel isNOT
availablewhentheOn/Off-typeFootSwitchisconnected.Pleasedepressthe
FootSwitchtocontroloutput.
VariableFootControl1. Atanytimeinoperation,theVariableFootControlcanbepluggedinthe
socketonthebacksideoftheMFTouch.
2. AftertheVariableFootControlisconnected,thescreenontheupperright
cornerofthepanelwilldisplaythesignal .
3. PleaseadjusttotherequiredspeedbyturningtheOutputControlKnob.
4. Theoutputsettingdisplayonthepanelwillindicatetheoutputlevel,whichis
determinedbythedepressingoftheVariableFootControl.Theoutputpower
(orspeed)willnotexceedthelevelsetbytheOutputControlKnob.
5. WhenusingtheVariableFootControl,pleasekeepdepressingittoproduceoutput.
6. TostopoperatingtheMFTouchwithVariableFootControl,pleasepressthebutton onthepanel,andthentheVariableFootControlwillbedisconnected.
Signal Meaning
VariableFootControlisconnected
VariableFootControlisdisconnected
DisplayofTroublewarningIncaseofabnormaluseoroverload,theoverloadprotectionwillcutofftheoutput
andthetroublesignalwillblink.Pleaseturnthepowerswitchoffandonagainto
recommenceoperation.
On/Off-typeFootSwitchUsage1. Atanytimeinoperation,theFootSwitchcanbepluggedinthesocketonthe
backsideoftheMFTouch.
2. PleaseadjusttotherequiredspeedbyturningtheOutputControlKnob.
3. WhenusingtheFootSwitch,pleasekeepdepressingittoproduceoutput.
4. TheOutputOn/OffSwitchonthemainunitortouchpanel isNOT
availablewhentheOn/Off-typeFootSwitchisconnected.Pleasedepressthe
FootSwitchtocontroloutput.
VariableFootControl1. Atanytimeinoperation,theVariableFootControlcanbepluggedinthe
socketonthebacksideoftheMFTouch.
2. AftertheVariableFootControlisconnected,thescreenontheupperright
cornerofthepanelwilldisplaythesignal .
3. PleaseadjusttotherequiredspeedbyturningtheOutputControlKnob.
4. Theoutputsettingdisplayonthepanelwillindicatetheoutputlevel,whichis
determinedbythedepressingoftheVariableFootControl.Theoutputpower
(orspeed)willnotexceedthelevelsetbytheOutputControlKnob.
5. WhenusingtheVariableFootControl,pleasekeepdepressingittoproduceoutput.
6. TostopoperatingtheMFTouchwithVariableFootControl,pleasepressthebutton onthepanel,andthentheVariableFootControlwillbedisconnected.
Signal Meaning
VariableFootControlisconnected
VariableFootControlisdisconnected
DisplayofTroublewarningIncaseofabnormaluseoroverload,theoverloadprotectionwillcutofftheoutput
andthetroublesignalwillblink.Pleaseturnthepowerswitchoffandonagainto
recommenceoperation.
Handpieces Included with the 3-in-1 Kit
For information on the additional handpieces included with the 3-in-1 Kit, please refer to the instructions included with those handpieces.
• Recipro Handpiece Z-2X (Item# 510-2150) or Z-6X (Item# 510-2160) • BH60 Handpiece (Item# 500-0224)• Brushless DC Handpiece (See page 7 of this manual)
4
5
OperatingGuide
UltrasonicPolishingUsage1. Installaproperholderandtoolontheultrasonichandpiece. Pleaseusethe
toolchangingracktoavoiddamaginginnercircuit
2. InsertthehandpieceplugintothesocketonthefrontsideoftheMFTouch.
3. TurnonthepoweroftheMFTouch,thedisplayofthetouchpanelwill
defaulttothemodelastused.
4. Pleasepressthebutton onthepaneltoselecttheultrasonic
function,andthenthescreenontheupperleftcornerofthepanelwill
displaythesignal ,whichmeanstheMFTouchisnowscanning
thefrequency.
5. Ifthesignalisoff,itmeansthefrequencyhasbeentracedsuccessfully.Then
pushtheOutputOn/OffSwitchonthemainunitortouchpanel to
starttouse.
5. Duringusage,theoutputpowercanbeadjustedbyturningtheOutput
ControlKnob.Pressthebutton ,andthentheoutputwillincrease
30%,evenintheconditionoffullpower.It’srecommendedtousethis
functionwithlargehandpieceGS-H04andNOTtooperatetheMFTouchin
thismodeforlongperiodsoftimewithsmallhandpieceGS-H26.Tomakethe
outputpowerreducetooriginalcircumstance,pleasepressthebuttonagain.
6. Toolsandtoolholdersmustbesecurelyfastenedonthetoolchangingrack;
otherwiseitwillnotonlyreducetheoutputpower,butalsocausethefailure
oftheMFTouchtotracethecorrectfrequency.
7. Ahigh-pitchednoisewillbeemittedifthetoolortoolholderisnotsecurely
fastenedorfullyclamped.Pleasecheckagainifalljointsareconnected
securely.Ifthenoisestillpersists,pleaseswitchoffthepowerandreplace
thetoolortoolholder.ThenrestarttheMFTouchtoactivatetheautomatic
frequencyadjustment.
+30%POWERlargehandpieceGS-H04 ✔
smallhandpieceGS-H26 ✗
6
Brush-typeDCHandpieceUsage1. TheMFTouchisintendedforD.C30Vmicromotorhandpieces.
2. Connectahandpiecetothejackonthemainunit,andinstallaproper
polishingtool.
3. TurnonthepoweroftheMFTouch,thedisplayofthetouchpanelwill
defaulttothemodelastused.
4. Pleasepressthebutton onthepaneltoselectthefunctionofDC
rotary,andthenpushtheOutputOn/OffSwitchonthemainunitortouch
panel tostarttouse.
5. Thestartingspeedissettobetheminimumspeedasdefaultforyourown
safety.PleaseadjusttotherequiredspeedbyturningtheOutputControl
Knob.
6. Whenthetoolisrotating,theMFTouchwilldisplaythetoolloadingonthe
panel.Toprotectthehandpiece,pleasedonotoperateovertheredlight
level.
7. Thedirectionofrotationissettobeforward-rotatingasdefault.Tochange
thedirection,pleasepresstheForward/Reversebutton onthe
panelatfirst,andthentherotationwillbestopped.Thesignalofrotation
directionwillchangetobe .PushtheOutputOn/OffSwitchonthe
mainunitortouchpanel ,thedirectionwillchangeafterwards.
8. Foryourownsafety,
pleasecontrolthe
rotatingspeedwithina
suitablerangetofitthe
toolinoperation.It’s
recommendedtouse
smalltoolsinhigh-
speedrotation.Onthe
contrary,largetools
areproperlytobe
operatedinslow
rotation.
7
BrushlessDCHandpieceusage1. Connectahandpiecetothejackonthemainunit,andinstallaproper
polishingtool.
2. TurnonthepoweroftheMFTouch,thedisplayofthetouchpanelwill
defaulttothemodelastused.
3. Pleasepressthebutton onthepaneltoselectthefunctionof
brushlessDCrotary,andthenpushtheOutputOn/OffSwitchonthemain
unitortouchpanel tostarttouse.
4. Thestartingspeedissettobetheminimumspeedasdefaultforyourown
safety.PleaseadjusttotherequiredspeedbyturningtheOutputControl
Knob.
5. Whenthetoolisrotating,theMFTouchwilldisplaythetoolloadingonthe
panel.Toprotectthehandpiece,pleasedonotoperateovertheredlight
level.
6. Thedirectionofrotationissettobeforward-rotatingasdefault.Tochange
thedirection,pleasepresstheForward/Reversebutton onthe
panelatfirst,andthentherotationwillbestopped.Thesignalofrotation
directionwillchangetobe .PushtheOutputOn/OffSwitchonthe
mainunitortouchpanel ,thedirectionwillchangeafterwards.
7. Foryourownsafety,
pleasecontrolthe
rotatingspeedwithina
suitablerangetofitthe
toolinoperation.It’s
recommendedtouse
smalltoolsinhigh-speed
rotation.Onthecontrary,
largetoolsareproperly
tobeoperatedinslow
rotation.
201 Hancock Ave. Bridgeport, CT 06605, USAorders 800.243.4466 | 203.366.5400 | fax 203.366.3953
email info@gesswein.com | www.gesswein.com
8913
800/
0717
Specification
Summary
Dimensions 27.5cm×20cm×20cm
NetWeight 4.6Kg
Electrical 90-240VAC50/60Hz
Max.PowerConsumption 300watts
OverloadProtection Yes
Fuse 3A20mmtime-lag
OutputAdjustment ContinuouslyVariable
TouchPanel 4.3inch,Color
Ultrasonic
OperatingFrequency 18-26kHz
FrequencyAdjustment Automaticfeedback
StrokeAmplitude 3-40microns
Max.OutputPower 45W
DCTools
OutputDCRotaryTool 5-32VDC,Max.180W
OutputDCBrushlessTool 1,000-50,000rpm,Max.250W
top related