installation guide r nt nnect db-525
Post on 04-Nov-2021
16 Views
Preview:
TRANSCRIPT
DB-525
Front Panel 5.25 inch Device BayInstallation Guide
Step 1 Check the contents of the Box.
Front Connect DB-525metal frame with P.C.B
DB-525plastic cover 1for HDD
DB-525plastic cover 2for MO/FDD/Zip
Installation guideScrews
R NT
2.Insert your DB-525 into the slot, Do not force it in any further than needed.
Step 2 Remove the cover case from the computer.
Please check that everythingconnected to the computer hasbeen removed and that the computer itself has beenswitched off from the mainpower supply.
Please consult the computer manualwhen remove the cover case from thecomputer.Caution:Please be careful whenremoving the cover case as all edgesare sharp.
3.Please use the screws provided to lock the DB-525 into place.
Step 4
Step 5-2
Step 5-1
Step 5
Connect the FireWire cable.(For IEEE-1394 host adapter with 6pin connector.)Locate the FireWire 6pin-plug cable in the package.
Connect the USB 2.0 interface cable.
(For built-in internal USB 2.0 or 1.1 connector on mainboard.)Locate A-to-5pin type USB cable in the package.
Connect the USB interface cable.
(For USB 2.0 host adapter with A-type connector)
For built-in internal USB 2.0 or 1.1 connector on mainboard:refer to Step 5-1.
For USB 2.0 host adapter with A-type connector:refer to Step 5-2.
To connect the USB cable from the main board, please check yourmainboard manual and page 2 of this manual for furtherconnection instruction.Caution:The USB port may be damaged if inserting USB flatcable on reverse.(Warranty does not cover such damage)
Caution:For easy installation, connect the USB & FireWirecables to DB-525 before insertit into the slot.
Step 3 Install DB-525 to the computer.1.Remove the 5.25-inch panel. Further details on how to remove the panel can be found in your computer
NNECT
Connect the USB 2.0 or 1.1 interface cable.
Internal USB Port
Internal IEEE 1394 Port
USB Power
USB P3-
USB P3+
GND
USB Power
USB P2-
USB P2+
GND
NC
16
ASUS
10 5
Internal USB Port
top related