installation guide belkin wireless g pcmcia adapter windows

The intelligent mobile service

More power to you

Installation Guide Belkin Wireless GPCMCIA AdapterWindows 2000Service Pack 4

The intelligent mobile service

2

Belkin Wireless G PCMCIA

AdapterNOTE: PLEASE INSTALL THE ADAPTER SOFTWAREBEFORE YOU INSTALL YOUR ADAPTER INTO YOURCOMPUTER

• Unpack and check contents of box

• Locate CD and place into CDRom drive. The CD will auto start

You will be shown the Setup Utility screen.

• Click Install

The intelligent mobile service

You will be shown the following screen.

3

• Click 'Click here' to begin installation

You will be shown the Installation Wizard screen.

• Click Next

You will be shown the Choose Destination Location screen.

The intelligent mobile service

4

• Click Next

You will be shown the Select Program Folder screen.

• Click Next

You will be prompted to insert your adapter into yourcomputer.

The intelligent mobile service

• Insert your adapter

• Click OK

You will be shown the Country Channel Select screen.

5

• Select United Kingdom

• Click OK

The intelligent mobile service

You will be shown the Wireless Card Utility.

6

• Click on the Configure tab

The intelligent mobile service

• In the section Network Mode, select Infrastructure

• In the section Network SSID, enter your ID. This can befound on the base of your hub or in the documentationprovided

7

The intelligent mobile service

• Click on the Security tab

8

The intelligent mobile service

• Select Enable WPA Encryption

9

The intelligent mobile service

• In the section Security Type, select WPA-PSK

You will be taken to the Advanced Security screen.

10

The intelligent mobile service

• You will now need to enter your Network Key/WPAPassphrase. This can be found on the base of your BT Hubor in the documentation provided

11

The intelligent mobile service

• Click OK

12

The intelligent mobile service

• Click Apply

Ensure the BT Hub is powered on.

• Press the “1” button on your hub to put the hub in pairingmode and enable the connection to your adapter.

You are now ready to browse the Internet.

• Go to a popular site to test the connection e.g.http://www.bbc.co.uk

You will be taken back to the Security Screen.

13