installation accessories - hemomatik oy...avoiding the protrusion of the front part, slightly...
Post on 31-Mar-2020
1 Views
Preview:
TRANSCRIPT
197
Installation accessoriesST serie Various accessories for sensors 198
5.3
catalogue_113_2 Page 85 Tuesday, March 26, 2002 4:24 PM
installation accessories
198
SERIE
ST
�
Mounting brackets
�
Swing mount brackets for an easy alignment
�
Focusing devices and shutters for reduction of minimum object inapplications where high precision of detection is required
�
Protective fronts
�
Anti-condensation accessoriescan be cut to size
�
Right angle beam adapter
�
Tester for checking correct working of DC sensors
ORDERING SYSTEM Mounting brackets
model description to be used with following series
ST 01
metal mount bracket for rectangular sensors BS-BV - G - K - R
ST 02
Ø18mm plastic swing bracket MS - MV - SA - SS - SK
ST 04
Ø12mm plastic swing bracket HM - MM
ST 07
metal mount bracket for rectangular sensors PS - FS1
ST 12-A
metal axial mount bracket for M12 sensors HM - MM - PM - PMS - VM
ST 12-C
metal right angle mount bracket for M12 sensors HM - MM - PM - PMS - VM
ST 13
metal swing bracket with threaded holes for M30 sensors MT - CS - TK
ST 14
metal swing bracket with screws for M30 sensors MT - CS - TK
ST 18-A
metal axial mount bracket for M18 sensors MS - MV - SA - SS - SK - PK - VK -GL15 - AX80- AX100
ST 18-C
metal right angle mount bracket for M18 sensors MS - MV - SA - SS - SK - PK - VK -GL15 - AX80- AX100
ST 30-A
metal axial mount bracket for M30 sensors MT - CS - TK - CT - PT - VT - AX500
ST 30-C
metal right angle mount bracket for M30 sensors MT - CS - TK - CT - PT - VT - AX500
ST 70
metal mount bracket for miniaturized rectangular sensors QX
ST 80
metal mount bracket for rectangular sensors RX
ST 81
metal mount bracket for rectangular sensors with fixing slide RX
ST 83
metal mount bracket for rectangular sensors with fixing slide SX
ST 84
metal mount bracket for rectangular sensors with fixing slide TX
ST 29
M18 metal ring nuts for metal sensors mounted on ST02 swing brackets MS - SA - SS
STC-00
mounting bracket for cylindrical rod ø 12 ÷ 20 mm. RL 110 - 116 - 113G
STC-18
mounting bracket for cylindrical rod ø 12 ÷ 20 mm. SS - SP - MS - MP - MQ - MV - FA - FB - SK - SH
STC-80
mounting bracket for cylindrical rod ø 12 ÷ 20 mm. RX*/**-*A - BS - BV - PS
ORDERING SYSTEM Focusing devices - Shutters
model description to be used with following series
STF-12 ... 50
M18 focusing device (12 - 25 - 50mm) SAT
STFM-1 ... 4
M12 focusing devices (7,5 - 12,5 - 22 - 29mm) HM - MM
STOK
M18 mechanical shutter for STP accessory SK
STOM1....6
shutter for M12 sensors HM - MM
STOS1....8
shutter for M18 sensors MS - MV - SA - SS - SP
ORDERING SYSTEM
Protective fronts - Right angle beam adapter
model description to be used with following series
ST 03
right angle beam adapter M18 MS - MV - SS - SK (through-beam models)
ST 37
right angle beam adapter M12 HM - MM
ST 55
right angle beam adapter M30 MT - CS - TK
ST 28
right angle beam adapter for optical fibres OF - CF
ST 30
antidust front M18 MS - MV - SA - SS
ST 36
antidust front M12 HM - MM
ST 32
anti-condensation front M18 MS - MV - SA - SS
ST 50
protective front M18 MS - MV - SA - SS
ST 60
protective front M12 HM - MM
ORDERING SYSTEM Focusing devices - Shutters
model description to be used with following series
ST 08
lock nuts fixing fibre M18 MSF
STZ3
undecal socket UR - D
ST 82
accessory screwdriver for trimmer adjustment BS - BV - PS - FS1 - QX - RX - SA - SK - SS - AX
ST 100
accessory for testing DC sensors
5.3
catalogue_113_2 Page 86 Tuesday, March 26, 2002 5:54 PM
installation accessories
199
MODEL ST01mounting bracket
Material zinc-plated ironApplications on series BS - BV
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONFor an easyand perfect mounting and alignment ofrectangular photoelectric sensors. This bracketallows the disalignment adjustment of ±7,5° in alldirections. Mounting with M4 screws.Photoelectric sensor step 25mm.Mounting step 25 +10mm.
4.3
45.5 7.5
2.5
1025
5
60
2.5
9
29.5
25 136 9
15°
15°
MODEL ST02Ø18 plastic swing bracket
Material ABSApplications on series MS-MV-SA-SS-SK
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a plastic mount bracket for M18 sensors that,using a ball joint, allows an easy mounting, orien-tationin all directions and block of retro-reflectiveand through-beam sensors.
Assembling
Fix the bracket to the support with two M4 screws,enter and block th special supplied nuts possiblyavoiding the protrusion of the front part, slightlytighten the 4 head screws, follow the orientationprocedure, tighten strongly the head screws.30°
5.5
4.1
44 5.5
185.
536
18.1
MODEL ST04Ø12 plastic swing bracket
Material ABSApplications on series HM-MM
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a plastic mount bracket for M12 sensors that,using a ball joint, allows an easy mounting, orien-tationin all directions and block of retro-reflectiveand through-beam sensors.
Mounting
Fix the bracket to the support with two M4 screws,enter and block th special supplied nuts possiblyavoiding the protrusion of the front part, slightlytighten the 4 head screws, follow the orientationprocedure, tighten strongly the head screws.30°
5.5
4.1
44 5.5
185.
536
12.1
MODEL ST07mounting bracket
Material zinc-plated ironApplications on series FS - PS
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONFor an easyand perfect mounting and alignment ofrectangular photoelectric sensors. This bracketallows the disalignment adjustment of ±7,5° in alldirections. Mounting with M3 screws (M4 on photoelectricsensors).Photoelectric sensor step 20mm.Mounting step 20mm.
1.5
7
20.5
20 147 7
15°
15°
6
41 7
1.5
38 20
3.4
5.3
catalogue_113_2 Page 87 Tuesday, March 26, 2002 4:24 PM
installation accessories
200
MODEL ST12-AØ12 metal axial mounting bracket
Material zinc-plated ironApplications on series HM-MM-PM-
PMS-VM
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a metal plane mount bracket with hole Ø12for mounting the sensor and two holes for M3screws, allowing the rotation of an optical axis forright beam angle adapter sensors.
Assembling
Slightly fix the mount bracket with two M3 screws,position the sensor and fix it with special suppliednuts, perform the adjustment procedure and blockthe M3 screws.
16°1
6°
2030
13
103220
12.2
53.5
1.5asole perfissaggioviti M3
slot for M3 screw fixing
MODEL ST12-CØ12 metal rignt angle mounting bracket
Material zinc-plated ironApplications on series HM-MM-PM-
PMS-VM
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a metal angular mount bracket with hole Ø12for mounting the sensor and two holes for M3screws, allowing the rotation of an optical axis foraxial sensors.
Assembling
Slightly fix the mount bracket with two M3 screws,position the sensor and fix it with special suppliednuts, perform the adjustment procedure and blockthe M3 screws.
26.5
1.5
12.2
15
1.5 20
3010
13
16° 1
6°
2030
90°
asole perfissaggioviti M3
slot for M3 screw fixing
MODEL ST13Ø30 metal swing bracket
Material aluminiumApplications on series CS-MT-TK
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a mount bracket in aluminium for sensorsthat, using a ball joint, allows an easy mounting,orientation in all directions and blocking retro-reflective and through-beam sensors in requiredposition.
Assembling
It is possible to fix the mount bracket to the worksurface using M6 screws from beneath the surfaceor through the wall, enter and block the sensorwith special supplied nuts if possible avoiding pro-jection of the front part, screw (1) perform theadjustment procedure, strongly turn the lateralscrew.
60
70
22M6 M6
40M6 M6
Ø30 6347
15
1
40
3515
MODEL ST14mounting bracket
Material aluminiumApplications on series CS-MT-TK
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a mount bracket in aluminium for sensorsthat, using a ball joint, allows an easy mounting,orientation in all directions and blocking retro-reflective and through-beam sensors in requiredposition.
Assembling
It is possible to fix the mount bracket to the worksurface using long M6 screws from upper side,enter and block the sensor with special suppliednuts if possible avoiding projection of the frontpart, screw (1) perform the adjustment procedure,strongly turn the lateral screw.
70
70
22
6347
1
35
56
15
15
Ø30
5.3
catalogue_113_2 Page 88 Tuesday, March 26, 2002 4:24 PM
installation accessories
201
MODEL ST18-AØ18 metal axial mounting bracket
Material zinc-plated ironApplications on series MS-MV-SA-SS-
SK-SP-PK-VK-GL-AX80-AX100
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a metal plane mount bracket with hole Ø18for mounting the sensor and two holes for M4screws, allowing the rotation of an optical axis forright beam angle adapter sensors.
Assembling
Slightly fix the mount bracket with two M4 screws,position the sensor and fix it with special suppliednuts, perform the adjustment procedure and blockthe M4 screws.
15°
15°
30
42
16
1440
3030
18.2
70.5
1.5asole perfissaggioviti M4
slot for M4 screw fixing
MODEL ST18-CØ18 metal right angle mounting bracket
Material zinc-plated ironApplications on series MS-MV-SA-SS-
SK-SP-PK-VK-GL-AX80-AX100
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a metal angular mount bracket with hole Ø18for mounting the sensor and two holes for M4screws, allowing the rotation of an optical axis foraxial sensors.
Assembling
Slightly fix the mount bracket with two M4 screws,position the sensor and fix it with special suppliednuts, perform the adjustment procedure and blockthe M4 screws.
36.5
1.5
18.2
20
1.5
3030
37
14
16
15°
15°
30
42
90°
asole perfissaggioviti M4
slot for M4 screw fixing
MODEL ST30-AØ30 metal axial mounting bracket
Material zinc-plated ironApplications on series
CS-MT-TK-CT-PT-VT-AX500
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a metal plane mount bracket with hole Ø30for mounting the sensor and two holes for M5screws, allowing the rotation of an optical axis forright beam angle adapter sensors.
Assembling
Slightly fix the mount bracket with two M5 screws,position the sensor and fix it with special suppliednuts, perform the adjustment procedure and blockthe M5 screws.
16°
16°
45
60
20
1750
4545
30.4
92
2.5asole perfissaggioviti M5
slot for M5 screw fixing
MODEL ST30-CØ30 metal right angle mounting bracket
Material zinc-plated ironApplications on series
CS-MT-TK-CT-PT-VT-AX500
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a metal angular mount bracket with hole Ø30for mounting the sensor and two holes for M5screws, allowing the rotation of an optical axis foraxial sensors.
Assembling
Slightly fix the mount bracket with two M5 screws,position the sensor and fix it with special suppliednuts, perform the adjustment procedure and blockthe M5 screws.
55
2.5
30.4
30
2.5
4545
42
14
20
16°
16°
45
60
90°
asole perfissaggioviti M5
slot for M5 screw fixing
5.3
catalogue_113_2 Page 89 Tuesday, March 26, 2002 4:24 PM
installation accessories
202
MODEL ST70mounting bracket
Material zinc-plated ironApplications on series BS - BV
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONFor a perfect and easy mounting and alignment ofrectangular photoelectric sensors QX serie. Itallows the adjustment of disalignment of ±5° inall directions. Mounting with M3 screws.Photoelectric sensor step 20mm.Mounting step 20mm.
27
8
14
273,5
14 10°
10°
20
MODEL ST80top mounting bracket
Material zinc-plated ironApplications on series RX
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONFor a perfect and easy mounting and alignment ofrectangular photoelectric sensors RX serie. Itallows the adjustment of disalignment of ±7,5° inall directions. Mounting with M4 screws.Photoelectric sensor step 25mm.Mounting step 25 +10mm.
1025
60
29
277 25 20
59
18
7,5
20
15°
15°
MODEL ST81side mounting bracket
Material zinc-plated ironApplications on series RX
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONFor a perfect and easy mounting and alignment ofrectangular photoelectric sensors RX serie. Itallows an adjustment of disalignment of ±15° inone direction and ±7,5° in another. Mounting with M5 screws.32
,5
10
40 15
55
21
707,5 7,51515,59,515
10
196,
5
11
1,5
30°
15°
MODEL ST83mounting bracket
Material zinc-plated ironApplications on series SX DESCRIPTION / INSTALLATION
For a perfect and easy mounting and alignment of rectangular photoelectric sensors SX serie. It allows an adjustment ofdisalignment of ±49° in one direction and ±15° in another. Mounting with M4 screws.
DESCRIPTION / INSTALLATION
2,514
25
6,1
6,3
30°
R18
31
116
17°
98°
67 4
22
3
5.3
catalogue_113_2 Page 90 Tuesday, March 26, 2002 4:24 PM
installation accessories
203
MODEL ST84mounting bracket
Material zinc-plated ironApplications on series TX
MODEL ST29M18 ring nut for mounting on ST02
Material zinc-plated brassApplications on series MS-SA-SS
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONM18 metal ring nut of small dimensions for easymounting of metal housing sensors on ST 02 swingbracket.Fixing with key of 21mm.
8 21
MODEL STC-00mounting bracket for reflectors
Material zinc plated iron/zinc alloy
Applications on series RL 100 - RL 116RL 113 G
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a bracket mounting on a bar of.12…20mm,that allows the radial rotation of the optical axison two orthogonal planes.Provides the widest adjusting range, making easierthe alignment operations.Fix the reflector RL 110 to the hole (1), using theM5 screw and nut.Fix the reflector RL 116 to the holes (2), using twoM3 screws and nuts.Fix the reflector RL 113G to the holes (3), usingtwo M3 screws and nuts.The screws and the nuts are supplied.Hook up the bracket to the terminal and positiononto the bar. Screw the dowel without tighten. Perform the adjustments and strongly turn thedowel.
MODEL STC-18mounting bracket for sensors ø 18
Material zinc plated iron/zinc alloy
Applications on series MS - MV - SA - SSSP - SK - SH
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a bracket mounting on a bar of.12...20mm,that allows the radial rotation of the optical axison two orthogonal planes.Provides the widest adjusting range, making easierthe alignment operations.Fix the sensor M18 to the bracket.Hook up the bracket to the terminal and positiononto the bar.Screw the dowel without tighten. Perform the adjustments and strongly turn thedowel.
DESCRIPTION / INSTALLATIONFor a perfect and easy mounting and alignment of rectangular photoelectric sensors SX serie. It allows an adjustment ofdisalignment of approx. ±43° in one direction and ±15° in another. Mounting with M5 screws.
DESCRIPTION / INSTALLATION
3
2,514
25
6,1
6,3
30°
R18 31
11,6°
96,4
°
70 5
40
116
5.3
catalogue_113_2 Page 91 Tuesday, March 26, 2002 4:24 PM
installation accessories
204
MODEL STC-80mounting bracket for sensor
1
Material zinc-plated iron/zinc alloy
Applications on series RX - BS - BV - PS
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is a bracket mounting on a bar of.12...20mm,that allows the radial rotation of the optical axison two orthogonal planes.Provides the widest adjusting range, making easierthe alignment operations.Fix the sensor to the bracket.Hook up the bracket to the terminal and positiononto the bar.Screw the dowel without tighten. Perform the adjustments and strongly turn thedowel.
MODEL STF-12, 25, 50M18 focusing set
Material anodized-aluminium
Applications on series SA (SAT mod.)Focal distance STF-12 12mmFocal distance STF-25 25mmFocal distance STF-50 50mm
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIf mounted on SAT photoelectric sensors it allowsto establish the focal working distance to detectvery small elements.
See “characteristic curves” of SA serie.
M18
x1
21.4
23
Ghiera di fissaggio
Lentefocalizzatrice
O-RingSupportofilettato
Threaded body
O-Ring Focal lens Locking nut
MODEL STFM-1, 2, 3,4mount bracket
Material anodized-aluminium
Applications on series HM (emitter)Focal distance STFM-1 7,5mmFocal distance STFM-2 12,5mmFocal distance STFM-3 22mm
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIf mounted on the emitter it allows to obtain a focalized point to detect very small elements.
12x1
ø16
14
O-Ring lentefocalizzatrice
O-Ring Focal lens
code STFM-1 STFM-2 STFM-3 STFM-4
ø object (mm) 0,25 0,4 0,5 0,6
HM distance (mm) 105 140 210 240
MODEL STOKmechanical shutter for contact protection
Material anodized-aluminium
Applications on series SK (SK3+STP)
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThis accessory is used to increase the sensitivity of the STPaccessory; it consist of a mechanical shutter where the sectionof the light beam is reduced in proportion to the screwingdepth of a standard dowel to the optical axis. It also affords abetter protection of the sensors against hostile agents sincethe part ito be introduced into the rubber features a smoothsurface, whereas he sensor is screwed on the STOK and thetightness is assured by a seal. Due to the reduction of theemitted power, caused by the beam contraction, it can beused for sensing ranges up to 2 m. only.InstallationThis accessory must be fixed to the STP aluminium stand byintroducing it into the special guides and into the rubber pro-file; the sensor must be screwed in the M18 hole with the rub-ber seal: the adjustment of the dowel is possible only beforeintroducing it into the rubber; the adjustment of the sensorremains available. From the pointof view of security, sensitiv-ity always remains equal to the inside diameter of the rubber(13 mm.).
45
20 25
M18
x1Ø
28
Asola per fissaggio nel supporto a C dell'STP
Regolazione dell'otturazione
Lato sensore
Lato da inserirenell'STP
Ø18
STP side
Shuttingadjustment
Slot for fixing in the STP C-stand
Sensor side
5.3
catalogue_113_2 Page 92 Tuesday, March 26, 2002 4:24 PM
installation accessories
205
MODEL STOM1...6M12 shutters
Material anodized-aluminium
Applications on series HM-MM
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThe accessory for through-beam emitter/receiverM12 reduces the beam dimension to detect smalldimension targets (up to 1mm) for a precisedetection. The system is formed by a threaded ring nut, aprotection glass, an O-ring and a hole to tightenon the optic of both sensors.The obtained distances referred to minimumdetectable targets.12
x1
ø
ø16
14
O-Ring vetro
di protezione
otturatoreO-Ring Protection glass
Shuttercode STOM1 STOM2 STOM3 STOM4 STOM5 STOM6
ø oggetto 1 2 3 4 5 6
MM dist. (m) 0,05 0,20 0,40 0,60 1,40 2,00
HM dist. (m) - 0,10 0,23 0,40 0,59 0,77
MODEL STOS1...8M18 shutters
Material anodized-aluminium
Applications on series MS-MV-SS
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThis accessory available for through-beam photoelectric switches M18reduces the emitted beam allowing the detection of small targets (downto 1mm). The shutter consists of a threded ring nut, a protection glass,an O'ring and an aperture to be screwed on the optical head of both emit-ter and receiver. Sensing distance referred to minimum detectableobjects, are listed hereunder.
ø24
18x1
18
ø
ø22
O-R
ingvetro
di protezioneotturatore
O-R
ingS
hutterP
rotection glass
code STOS1 STOS2 STOS3 STOS4 STOS6 STOS8 n/mont.
ø shutter (mm) 1 2 3 4 6 8 -MSE-RMVE-R
dist. (m)object (mm) / 0,8
11,81,5
3,22
6,53
164
164
MSE-DMVE-D
dist. (m)object (mm) / 1,5
13,51,5
6,52
153
264
324
SSE-Rdist. (m)
object (mm) / / 11,5
1,52
3,53
6,54
84
SSU-Gdist. (m)
object (mm) / 11
2,51,5
4,52
84
84
84
SSU-Vdist. (m)
object (mm) / 1,31
31
31
31
31
31
MODEL ST03M18 right angle beam adapter
Material ABSApplications on series MS-MV-SK-SS-SA
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt allows a detection at 90° as to the optical axisof the photoelectric sensor. For M18 sensors.This accessory consists of an internal threadedbody to be screwed on the optical head of thephotoelectric switch. The mirror inside the body isset at 45° to the optical axis of the sensor allow-ing detection at 90°. The sensitivity loss is approx. 20-30%.Look at the "excess gain" curves to determinatethe nominal sensing distance of different models.Do not use with diffuse reflection sensors.
ø24
18x1
1225
13
ø21
16
MODEL ST37M12 right angle beam adapter
Material anodized-aluminium
Applications on series MMonly for
through-beammodels
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt allows a detection at 90° as to the optical axisof the photoelectric sensor. For M12 sensors.This accessory consists of an internal threadedbodyto be screwed on the optical head of the pho-toelectric switch. The mirror inside the body is setat 45° to the optical axis of the sensor allowingdetection at 90°. The sensitivity loss is approx. 20-30%.Look at the "excess gain" curves to determinatethe nominal sensing distance of different mo-dels.
ø16
12x1
10.8
17
10.2
5.3
catalogue_113_2 Page 93 Tuesday, March 26, 2002 4:24 PM
installation accessories
206
MODEL ST55M30 right angle beam adapter
Material anodized-aluminium
Applications on series CS-MT-TK
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThis accessory allows a detection at 90° as to the optical axis of the photoelectric switch. For M30 sensors.It consists of a threaded body to be screwed on the optical photoelectric switch. The mirror inside the body is set at 45° to the optical axis of the sensor allowing detection at 90°. The sensitivity loss is approx. 20-30%.Look at the "excess gain" curves to determinate the nominal sensing distance of different models.
23
16,5
30,5
105
47
ø35
22,4
45°
M30x1,5 - 6H
MODEL ST28M7 right angle beam adapter
Material anodized-aluminium
Applications on series CF-OF
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThis accessory allows a detection at 90° as to theoptical axis of the fibre and consists of a threadedbody to be screwed on the optical fibre-head.The mirror inside the body is set at 45° to theoptical axis of the sensor allowing detection at90°. The sensitivity loss is approx. 20-30%.Look at the "excess gain" curves to determinatethe nominal sensing distance of different models.
ø11
7x0.75
6
19
5
MODEL ST30M18 antidust front
Material anodized-aluminium
Applications on series MS-MV-SA-SS-SK
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is an accessory in black anodized-aluminium tobe screwed on the sensor head and has a side inletpipe to be feeded with clean compressed-air. Formodels not with narrow beam the loss of sensitiv-ity is 10%.
Assembling
The antidust front has to be screwed on the sensorhead and it can be used in place of a screw nut tofix the sensor. It's necessary to use clean com-pressed-air to connect to the side inlet pipe.
ø22
M18x1
35
Attacco per flessibilearia di D 4x6 mm
20
Fitting for air hose D 4x6mm
MODEL ST32M18 anti-condensation front
Material anodized-aluminium
Applications on series MS-MV-SA-SS
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt’s an accessory in black anodized-aluminium toavoid condensation on the lenses of M18 sensors,when ambient temperature is lower than 0°C. Itcan be mounted only on special sensor with anheating element, available on request.
Assembling
The anticondensation front has to be mounted onthe sensor head and locked with a M18 lock-nut.Don’t use the front to lock the sensor in positionbecause in this way, the head produced inside thesensor could be lost: use two further nuts to lockthe sensor in position. The head of the sensormust penetrate 2cm into the front.
8
50
M18x1
ø36
ø28
5.3
catalogue_113_2 Page 94 Tuesday, March 26, 2002 4:24 PM
installation accessories
207
MODEL ST36M12 antidust front
Material anodized-aluminium
Applications on series HM-MM
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is an accessory in black anodized-aluminium tobe screwed on the sensor head and has a side inletpipe to be feeded with clean compressed-air. Formodels not with narrow beam the loss of sensitiv-ity is 30%.
Assembling
The antidust front has to be screwed on the sensorhead and it can be used in place of a screw nut tofix the sensor. It's necessary to use clean com-pressed-air to connect to the side inlet pipe.
Not usable with MM2 modelsø1612x1
28
Attacco per flessibile
aria di D 4x6 mm
16
Fitting for air hose D 4x6mm
MODEL ST50M18 protection front
Material anodized-aluminium
Applications on series MS-SS-SA
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThe accessory consists of a black anodized-alumin-ium body, an O'ring and a protection glass to screwon the sensor head, allowing use even in presenceof chemical solvents. The loss of sensitivity is25%.Refer to the "excess gain" curves.
Assembling
Before screwing the protection front on the sensorhead, place O'ring and glass in perfect position orit will cause the glass breakage.
It can be used in place of the screw nut to fix sen-sor.
Not to be used with diffuse reflectionmodels.
ø24
18x1
18
ø22
O-Ring
vetrodi protezione
O-Ring
Protection glass
MODEL ST60M12 protection front
Material anodized-aluminium
Applications on series HM-MM
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThe accessory consists of a black anodized-alumin-ium body, an O'ring and a protection glass to screwon the sensor head, allowing use even in presenceof chemical solvents. The loss of sensitivity is25%.Refer to the "excess gain" curves.
Assembling
Before screwing the protection front on the sensorhead, place O'ring and glass in perfect position orit will cause the glass breakage.
It can be used in place of the screw nut to fix sen-sor. Not usable with MM2 models
12x1
ø16
14
O-Ring
vetro
di protezione
O-Ring
Protection glass
MODEL ST08fibre ring nut OF series
Material acetalic resinApplications on series MSF
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONThis accessory allows a detection at 90° as to the optical axis.It consists of a threaded body to be screwed on the optical fibre head. The mirror inside the body is set at 45° to the optical axis of the sensor allowing detection at 90°. The sensitivity loss is approx. 20-30%.Refer to the "excess gain" curves.
Ø14
13
5.3
catalogue_113_2 Page 95 Tuesday, March 26, 2002 4:24 PM
installation accessories
208
MODEL ST82trimmer adjustment accessory
Material FE60Applications on series BS-BV-FS1-PS-SA-
SS-SK-QX-RX
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONScrewdriver for sensitivity adjustment and protec-tion screws.
0,6
4
2
37 37 1,53
Ø2
56
MODEL ST100control unit for sensors
Material plasticApplications on series DC sensors
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt verifies the functionality of all DC sensors with moderate absorption (50mA max.).Batteries are included 2x9V.
MODEL STZ3Undecal socket
Material plasticApplications on series UR
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is absolutely necessary to perform the wiring ofsupply/amplifier units.
1
57
15,5
1
1
2
11
10
9
3
6
5
7
8
4
4430
14,5
35
MODEL CSK/07-007 pins connector
Material plasticApplications on series TX
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONIt is used to connect the TX photoelectric switcheswith W plug cable exit.
10 56
Pg1
1
15,7
2429
10
5.3
catalogue_113_2 Page 96 Tuesday, March 26, 2002 4:24 PM
installation accessories
209
MODEL CHR/0B-00DIN43650 connector
Material polyamide
Applications on series TH(SBCR02)
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONDIN 43650 standard female plug for use with THsensors with Y-cable output.Consists of a connector cover and a terminal blockto which are attached the wires of the cable to beconnected.In the centre there is a screw used to fir theconnector to the sensor in a secure manner.
MODEL CL12/0B-00Aaxial connector
Material polyamide
Applications on series RX, SH, TH (SBCR02)
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONM12 4-pole standard axial connector withterminals for use with RX photoswitches, SH andTH sensors.Just the connector is supplied for complete fittingand connection to a cable.
MODEL CL12/0B-00Cright angle connector
Material polyamideApplications on series RX,
SH, TH (SBCR02)
DIMENSIONAL DRAWING DESCRIPTION / INSTALLATIONM12 4-pole right angle connector with terminalsfor use with RX photoswitches, SH and TH sensors.Just the connector is supplied for complete fittingand connection to a cable.
5.3
catalogue_113_2 Page 97 Tuesday, March 26, 2002 4:24 PM
top related