innovative deep ocean technologies snokote-cl · pdf fileinnovative deep ocean technologies...

SingaporeRovsco Asia Pte LtdBlock 302, #04-05Loyang Offshore Supply Base25 Loyang CrescentMailbox 5065, Singapore 508988Tel: +65 6546 6526Fax: +65 6546 5625Email: sales@rovscoasia.com

USARovsco, Inc.5263 Barker Cypress RoadSuite 600Houston, Texas 77084Tel: +1 281 858 6333Fax: +1 281 858 6363Email: sales@rovsco.com

www.rovsco.com

Innovative Deep Ocean Technologies

All Rovsco specifications and data sheets are subject to change without any prior notice in line with Rovsco’s policy of continued product development.

©2014 All rights are reserved

Innovative Deep Ocean Technologies

www.rovsco.com

Snokote-CLA Long Lasting and Environmentally Safe, Anti-Corrosive Lubricant for ROV Steel Armored Umbilical

Snokote-CL manufactured by Rovsco in Houston, Texas is a Corrosion Inhibitor specially formulated to protect ROV steel armored umbilical in a seawater and marine environ-ment.

ROV umbilicals are continuously in use in seawater environ-ment and are suscepible to corrosion. Snokote-CL provides a solution which is effective against corrosion, long lasting, and environmentally safe.

Snokote-CL is unique in the way it provides protection. Once applied it forms a bond with the steel armor of the ROV umbilial, staying in place and keeping the seawater from coming in contact with the steel armor.

Through maintaining a regular schedule of lubricating with Snokote-CL, you can extend the life of an ROV umbilical and save on expansive replacements.

Other Products from Rovsco:

Snokote -CL is safe to use:• Non-Toxic*• Non-Flammable• Never leaves sheen on the seawater surface*• No VOCs• Will not harm marine life

Snokote-CL provides long lasting protection• Highly resistant to water washout

• Will not run-off • Will not crack or peel off

Xtreme Umbilical Lubricator

• Effective against Corrosion• Environmentally Safe

TM

Extend the life of your ROV umbilical

Snokote Water Washout Test** At Temp. C % loss in seawater 38 0

o

** To view Water Washout Test Report, log onto www.snokote.com, view under Snokote-CL. Test was conducted at Southwest Research Institute, San Antonio, USA

* To view Test Reports, log onto www.snokote.com, view under Snokote-CL. Tests were conducted at ENSR Labs, USA

SingaporeRovsco Asia Pte LtdBlock 302, #04-05Loyang Offshore Supply Base25 Loyang CrescentMailbox 5065, Singapore 508988Tel: +65 6546 6526Fax: +65 6546 5625Email: sales@rovscoasia.com

USARovsco, Inc.5263 Barker Cypress RoadSuite 600Houston, Texas 77084Tel: +1 281 858 6333Fax: +1 281 858 6363Email: sales@rovsco.com

www.rovsco.com

All Rovsco specifications and data sheets are subject to change without any prior notice in line with Rovsco’s policy of continued product development.

©2014 All rights are reserved

Innovative Deep Ocean Technologies

www.rovsco.com

Rovsco Xtreme Umbilical LubricatorTM

High Pressure Lubricator for ROV umbilicals

Designed by Rovsco engineers to fully lubricate upper and inner layers of ROV umbilical steel armor to protect against corrosion. This lubricator is used in conjunction with high pressure pumps supplied by Rovsco.

The Xtreme cable Lubricators are used for lubricating new umbilicals before they go into service, or tolubricate existing ROV umbilicals already in the field.

The lubricating process does not hinder or stop the regular ongoing ROV operation, as the Xtremelubricator can be installed, used and removed withouteffecting the ongoing operation.

The ease of installation, use and removal of this tool lets the offshore personnel maintain a regular lubricating schedule of their ROV umbilicals to keep them corrosion free.

For best results, use Snokote-CL for lubrication.

Features:• Rugged, can withstand high lubricant pressures.• Accomodates a wide range of umbilical diameters.• Unique Seal Design - ensures lubricant penetration deep

within the armor layers resulting in total lubrication and coating.

• Easy installation and removal without hindering regular ROV operation.

Unique Design Split Seals - Easy installationfor umbilical diameters: 4 mm - 76 mm