ingenieurbüro für angewandte strömungsmechanik from gis to cfd - a cad solution for data transfer...
Post on 12-Jan-2016
216 Views
Preview:
TRANSCRIPT
Ingenieurbüro für angewandte Strömungsmechanik
From GIS to CFD- a CAD solution for data transfer between GIS and CFD-
Hans-Wilfried Mindt
(Dipl.-Ing.)
Hans-W. Mindt und Wolfgang Ottow GbRIngenieurbüro für angewandte StrömungsmechanikKruppstr. 82 – 100, 45145 Essen, Germanyinfo@a-CFD.dewww.a-CFD.de
Ingenieurbüro für angewandte Strömungsmechanik
Contents
• Problem determination• Point‘s of interrests• Fileformates used by GIS• Model topology
– By splines (Points interpolated)– By points (Points exactly by using triangles)
• Solution• Summary• Discussion
Ingenieurbüro für angewandte Strömungsmechanik
•CFD solution in Environment
•Exhaust emission
•Condensation
•Fresh-air supply for turbines and generators
•Catastrophe scenarios
Problem determination
Ingenieurbüro für angewandte Strömungsmechanik
•CFD solution in Environment
•Power supply station
•Residential district
•Fresh-air supply for turbines and generators
•Catastrophe scenarios
Problem determination
Ingenieurbüro für angewandte Strömungsmechanik
•CFD solution in Environment
Problem determination
Ingenieurbüro für angewandte Strömungsmechanik
Ingenieurbüro für angewandte Strömungsmechanik
•Object based on CAD
Model topology
Points Lines (splines) Surfaces (bicubic)
•Object based on CAD
Model topology
STL-Data file (output)
facett
Data-Set from GIS or related programs
•Points created opto-photografically
•Triangulars transfered into IGES Format
•IGES-Format transfered via CAD-System into STL-format
•STL-File readeble by PHOENICS
•Approximatly 1 day working time
Model topologic
Data-Set from GIS or related programs
•Rounded shape
•Cliffs possible
•Facetts
Model topologic
Data-Set from GIS or related programs
•Curved surface as approximation of mountains, but cliffs and sharp rocks are possible to build.
Model topology
Data-Set used in Rapid-prototyping branch
•Catalytic Reactor Bed
Model topology
Solution
Object form CAD-System
Objects from Library
Pressure distribution on the surface
•Streamlines
•Pressure distribution on surface
Solution
•A simple and easy to use data transfer between GIS and CFD is useful.
•The STL-Format is not established like in the rapid-prototype branch
•All data-sets are sorted in 2 ½ D
•We prefere
•Triangulation by third party product
•Transfer via iges into CAD-system
•Cutting and adding of parts inside of CAD-System
•Transfer of final geometric landscape (buildings can be included) via STL-File into CFD-System
Summary
Discussion
top related