industrial counting and control componentswestmexico.com.mx/pfd/hengstler/catalogos/2.-catalogo...
Post on 11-May-2018
235 Views
Preview:
TRANSCRIPT
IndustrialCounting and ControlComponents2001
Innovative products from yourcompetent partner. World-wide
Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Industrial and temperature controllersEven in extreme situations this family ofindustrial and temperature controllers showsits quality. Our controllers are distinguishedfor example by: very easy operation, state ofthe art technology, safety through self-tuningand compact DIN dimensions.
Industrial counter and control technologyAutomation components - starting from mini-counters up to sophisticated control counters,totalizing and preset counters, interfacecounters, control and measuring systems,multi-function counters, position indicators,shift counters, analog/digital timers andtachometers.
Shaft EncodersTechnology and flexibility are the primecharacteristics of these incremental andabsolute shaft encoders. Monolithic integra-ted OPTOASICS reliably replace up to 200SMD components. Due to the modularsystem customers can choose among morethan 1 million variants.
Relay technologyRelays with force-guided contact sets - aproduct range that leaves nothing to bedesired. Polarized bistable relays, up to 35 A.PC board relays, retentive relays, industrialrelays as well as high-voltage relays andmains isolation relays are our specialties.
Further Hengstler Products
Encoders Industrial and TemperatureControllers grado
Product RangeSafety Relays
Product RangeRelays
Industrial and TemperatureControllers
grado
Prozesse sicher regeln auch imExtrembereich.
EncoderRange
Innovative products from yourcompetent partner. World-wide
ProgrammübersichtRELAIS
Product RangeRELAYS
Gamme de ProduitsRELAIS
ProgrammübersichtSICHERHEITSRELAIS
Product RangeSAFETY RELAYS
Gamme de ProduitsRELAIS DE SÉCURITÉ
Printers andCutters
Overview:PrintersCuttersTerminals
Innovative products from yourcompetent partner. World-wide.
Member of U.S.A.
HENGSTLER INTERNATIONAL
DOC 1001.07 EComponents 2001 · 2000 · 1/01 · Ottodruck · Printed inGermany · Printed on paper of non-pollutable, chlorine-free, non-acid production
Hengstler GmbHPostfach 11 51 D-78550 Aldingen/GermanyHouse address: Uhlandstraße 49 D-78554 AldingenTel. +49 74 24-89 0Fax +49 74 24-89 500http://www.hengstler.comE-mail: info@hengstler.de
DQS certified to DIN EN ISO 9001 Reg. No. 1540-01
AGENTSArgentina, Australia, Austria, Belgium, Bulgaria, Brazil, Chile, China, Colombia, Czech Repu-blic, Denmark, Egypt, Finland, Germany, Great Britain, Greece, Guatemala, Hong Kong, Hun-gary, India, Indonesia, Iran, Ireland, Israel, Kenya, Korea, Lebanon, Luxemburg, Malaysia, Mexico,Netherlands, New Zealand, Norway, Pakistan, Peru, Philippines, Poland, Portugal, Romania,Singapore, Slovenia, Slovak Republic, South Africa, Spain, Sweden, Switzerland, Taiwan,Thailand, Turkey, United Arab Emirates, USA, Venezuela
GERMANYHengstler GmbHPostfach 115178550 Aldingen Tel. +49-74 24-8 90Fax +49-74 24-8 94 70/8 93 70http://www.hengstler.comE-mail: info@hengstler.de
HENGSTLER GMBHGeschäftsbereich Bauelemente Postfach 124978561 Wehingen Tel. +49-74 26-68-0Fax +49-74 26-6 82 81http://www.hengstler.comE-mail: Info.relay@hengstler.de
FRANCEHengstler Contrôle Numérique S.A.R.L.Z.I. des Mardelles94-106, Rue Blaise Pascal, B.P. 7193602 Aulnay-sous-Bois, CédexTel. (01) 48795501Fax (01) 48795561
GREAT BRITAINGreat BritainWest InstrumentsThe HydeBrighton, East SussexBN2 4JU, EnglandTel. +44 (0) 1273 606271Fax +44 (0) 1273 609990
BRASILVeeder Root do BrasilCom. e. Ind. Ltda.Rua Ado Benatti, 92Sao Paulo SPCEP 05037-904Tel 0055 11 361 121 55Fax 0055 11 36 11 982e-mail: dlassner@veeder.come-mail: Antonio_Araujo@veeder.com
ITALYHengstler Italia S.r.l.Via G. Cavalcanti, 520127 Milano MITel. +39-02-26821943Fax +39-02-26821953E-mail: info@hengstler-italia.com
JAPANHengstler Japan Corp. Tokyo1–8–5, Asagayaminami Suginami-Ku Tokyo 166-0004Tel. (03) 53060150Fax (03) 53060160
JAPANHengstler Japan Corp. Osaka2–12–23, MinamikanedenSuita-shiOsaka 564-0044Tel. (06) 63868001Fax (06) 63865022E-mail: mailmaster@hengstler.co.jphttp://www.hengstler.co.jp
SPAINHengstler España S.A.C/Córcega, 541, 2° 1a08025 BarcelonaTel. +34-93 435.51.50 / 64.28 / 76.92Fax +34-93 347.92.60E-mail: hengstler@hengstler.es
USADanaher Controls1675 Delaney RoadGurnee, IL 60031-1282Tel. (847) 662.2666Fax (847) 662.6633e-mail: dancon@dancon.comhttp://www.dancon.com
www.hengstler.com
1Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Table of contents
Successful with Hengstler 2 New Products 4 Hengstler’s Product Range 6 Top Service for You 8 Overview of Products in this Catalog 12/41
Gene
ral
info
rmat
ion
Appl
icat
ions
Tota
lizin
gCo
unte
rsPr
eset
Coun
ters
Indi
cato
rsTi
mer
s /
Tim
er r
elay
sTa
chom
eter
sPn
eum
atic
sPo
siti
onIn
dica
tors
Acce
ssor
ies
Mis
cella
neou
s
GENERAL INFORMATION
APPLICATIONS
TOTALIZING COUNTERS
PRESET COUNTERS
INDICATORS
TIMERS / TIME RELAYS
TACHOMETERS
PNEUMATICS
POSITION INDICATORS
ACCESSORIES
MISCELLANEOUS
NEW
Application Examples 43 Connection Examples 45 Interface Counters 49 Measuring Systems 50 Modular System 400 62
Glossary 345 Terms and conditions 355 International representative 357
Page
63
125
183
195
249
271
295
319
Components 20012 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
The Hengstler headquarters in Aldingen.
The Hengstler headquarters are located inAldingen, in South-West Germany, on theedge of the Black Forest - a region famous
for its industrial pioneersand inventors. The foun-dations for the Hengstlercompany were laid by oneof these inventors, Jo-hannes Hengstler, who, in1846, set up a workshopwhich was later to beco-me the center of theworldwide Hengstlergroup. The workshop wasstarted for the manufac-ture of clock springs;today, Hengstler productsrange from miniaturecounters to length mea-suring systems.
Good reasonsfor working with Hengstler
Better by competence
This catalog provides proof of our compe-tence in the business field of industrialcounting and control components - acomprehensive program characterized(as are all Hengstler products) by state-of-the-art technology, excellent designand highest standards of quality andreliability.
Numbers count as the measure of allthings: the counters are provided byHengstler. Their main areas of use are inmechanical engineering, electrical tech-nology and precision mechanics. Becauseso many companies rely on the quality ofour counters, Hengstler has become theleading manufacturer in this sector.
Hengstler - you can count on us.
All technical data and information containedin this catalog, including the graphics, werecollected and compiled with the utmost care. This catalog provides information on productsand accessories, which, however, does notconstitute any guarantee for technical data orfeatures. The user of these products must
determine himself the suitability of the pro-duct for the intended use.
All technical data is subject to alterations. Forquestions of technical nature or regarding pri-ces and delivery, please contact our companyheadquarters or field service employees.
3Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Innovation at an internationallevel
Our numerous branches and representativesin Europe, America and Asia have made us atruly international enterprise. Our availabi-lity around the globe is, of course, a greatbenefit for our customers - the nextHengstler contact is never far away.
Our sound footing in all parts of the worldalso has a positive effect on our productknow-how. Findings from worldwide res-earch programs provide a pool of informat-ion from which, in turn, the material for thecarefully directed, overall technologicalconcept is won. These findings form thepractice-oriented basis for ongoing innova-tion and efficiency in all corporate sectors.
Hengstler:Your TechnologyPartner
One of our particular strengths is the pro-ject management of custom applications.The basis for this is our wide experiencegained over many years in the fields of elec-tromechanics, mechanics, pneumatics andelectronics which is, of course, mirrored inour product program. Hengstler offers itscustomers complete support starting at theproject planning and development rightthrough to the final product. At present weare handling complex projects in the field ofpneumatics and printers for well-knowncompanies, such as Bosch, Festo, IBM andSiemens.
Talk to Hengstler. We can offer solutions.
The pace of innovation is getting faster andfaster in all sectors of technology. Onlythose who are able to follow or even set thispace will continue to be competitive.Strong, reliable partners are needed to helpyou cope with these new demands. Youneed partners whose top priority is addedproduct value/customer value, customer-orientation and high quality.
And taking all this into account, Hengstler isyour partner of choice.
Hengstler is a leading European manufactu-rer in the field of industrial counting andcontrol components, e.g. counters, enco-ders, industrial and temperature controllers,as well as relays. Hengstler’s product range is completed byprinters and cutters, with Hengstler beingthe greatest manufacturer in Europe.
QualityCustomer Orientation
Competence
High-quality materials in accordance with VDE (Association of German Electrotechnical Engineers)
UL, CL- and TÜV approvals DQS-certified pursuant
to ISO 9001
Innovation Product development is based on state-of-the-art technology
and highly advanced processes. Our products are setting the pace - around the globe We offer communicative products with state-of-the-art
bus technology. Vast know-how in the fields of development,
manufacturing and sales marketing Assistance and support are provided by specialists.
Experience
Variety Hengstler offers a wide range of
components for counting, control-ling, indicating, measuring, switchingand printing
Get it all from one source! Benefit from numerous variants -
for added flexibility.
Hengstler was founded in 1846 and has been manufacturing: counters: since 1926, printers: since 1970, sensors: since 1987, relays: since 1983...
Hengstler is never far away - wherever you are in the world
Application-specific assistance Customer-oriented manufacturing (one-piece-flow) Fair price/performance ratio Short delivery times and a high degree of
availability 48-hour repair service
Successful with Hengstler
Components 20014 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
RA 58 Absolute Encoder withhollow shaft
This encoder is very short as compared to fullshaft encoders and, therefore, is particularlyeasy to mount. It features an open hollowshaft on one side (inside diameter 10 or 12mm). It ensures safe and secure mounting onthe drive shaft by means of a clamping ring.The supplied mounting plate is used to pro-tect against torsion and compensate foraxial and radial offset of the drive shaft.
Special advantages: Enhanced dynamic behavior Reduced mounting times Fewer mounting parts required Reduced mounting depth
Hollow-Shaft Encoder RI36H withclamping shaftHengstler has expanded its product range bythis small, powerful hollow-shaft encoder,which offers a resolution of up to 3600pulses/rev. at an outer diameter of only 36mm. The use of an Optoasic makes this enco-der particularly reliable and immune tointerference. A coupling is not necessaryand, therefore, space and costs are saveddue to the fact that this encoder is mounteddirectly on the motor shaft.
4 million measuring increments. One sine-cosine signal period per turn is used for elec-tronic commutation of the synchronousmotors, which are energized by permanentmagnets.
Adaptive Sine-wave Encoder RIS 58The latest High-Tech generation
This new type of incremental encoders fea-tures a universal top-of-the line industrialencoder for a wide range of applications. Ituses a second generation Hengstler sineoptoasic, which ensures enhanced reliabilityand prolonged product life. Full shaft Open hollow-shaft on one side
Hengstler’s new products -powerful and versatile
NEW
Integrated Sine-wave Encoder S21 Motor feedback meeting the moststringent demandsThe S21 integrated sine-wave encoder wasspecially developed for use in brushless servomotors and for demanding applications,such as for CNC or printing machines. Highsine signal quality (distortion factor betterthan 1%) and interpolation of 2048 signalperiods allow resolutions of more than
5Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Inductive Linear Encoders LIHengstler offers the only linear measure-ment system to combine the high accuracyof optical encoders with the ruggednessand low cost of the previous magneticsystems.
Decisive benefits are: Speed: real-time signals up to 20 m/s
travel speed Ruggedness: Immune to dirt, vibrations
and magnetic fields (non-contact prin-ciple)
Precision: Allowing resolutions up to0.25 µm, reference signal output
Time and Cost-Saving: Even morecost-effective with increased travellengths.
AI Inductive Angle MeasuringSystem modular and ruggedThe inductive angle encoder exhibits thesame system characteristics as the linearencoder system described above. It is immu-ne against dirt and mechanical impact, andexcels by extremely high measuring accu-racy. Its flexible, modular design makes itsuitable for a multitude of applications,which were previously either not possible orrequired a high degree of mechanical effort.
MLC 9000 Multi-Channel ControlSystem with Bus IntegrationThe new “grado” multi-channel controllersystem is a modular control system that isextremely well-suited for DIN C-rail moun-ting in switching cabinets. It is particularlyspace-saving due to its very compact design- i.e. the width of the system correspondingexactly to the number of modules used.Further benefits: the system is operatedindependently of the PLC, with accordinglyreduced effort for parameterization, pro-gramming and control and significantlyhigher performance and precision values.
H-472 ... H-472 Safety RelaysThe new range of safety relays, H-472 to H-475, with force guided contact sets, fea-tures extremely flat relays (only 15.7 mm).Despite their small dimensions these relaysoffer up to 7 contacts and allow safe electri-cal isolation (reinforced/double insulation)for overvoltage category Ü=III and a degreeof pollution of V=2.Hengstler’s twin relays H-474 and H-475 areworldwide innovation: two safety relays arelocated in one housing.
Components 20016 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Get it all from one source: a requirementthat is more important than ever for manycustomers, since a close partnership contri-butes significantly to saving time and moneyand to facilitate processes. Moreover, inten-sive contacts between users and manufac-turers at the early stage of the productdesign are the basis of common success.
Hengstler offers versatile components forthe following fields of applications: Counting Controlling Regulating Indicating Measuring Positioning Switching Printing Cutting
Hengstler’s ProductRange:Competence andVariety
Controllers and IndicatorsOur industrial and temperature controllersdemonstrate their qualities - even underextreme conditions. Moreover, they excel byextremely easy operation, safety due to self-optimization features, state-of-the-art tech-nology and compact DIN sizes. NEW: the MLC 9000 multi-channel controlsystem with bus integration. It can be opera-ted independently of the PLC and features amodular, very compact design with particular-ly high performance and accuracy.
Indicating, counting, controlWhether you use electronic, electro-mechanical, mechanical or pneumatic-counters, your selection is always ruled byyour specific requirements. Our program ranges from miniature coun-ters to sophisticated programmable con-trol counters, multi-function counters,positioning counters, indicators, tacho-meters, time counters and timers.As for all our products, the standard featuresof this versatile portfolio are state-of-the-art technique, attractive design, high qualityand reliability as well as a customer-friendlyprice/performance ratio.
More information
Please order our Counter Catalog.Please contact your local distributor.
More information
Please order our Controller Catalog.Please contact your local distributor.
7Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Measuring and Positioning Continuously increasing demands withregard to precision and productivity, combi-ned with cost reductions due to automation,make the use of encoders indispensable innumerous industrial sectors.Hengstler’s overall product range offers: Incremental/absolute encoders Hollow shaft encoders Ex-protection versions Stainless-steel versions Field-bus encoders Sine-wave encoders, motor encoders Inductive linear and rotary measuring
systems
Printing and Cutting ApplicationsInnovative solutions in the field of printersand cutters are further assets offered byHengstler. Hengstler components offer spe-cial benefits: they are highly reliable, main-tenance-free and easy to handle, even whenit gets down to changing paper.
Our thermal printers and impact printersare used as voucher or receipt printers, e.gfor cash dispensers (ATM), Kiosk systems andall other types of automatic dispensers. Powerful cutters exhibiting different cuttingwidths ensure clean cuts for a great variety ofapplications and under extreme climaticconditions.Switching Applications
Cutting-edge relay technology is a key cha-racteristic of our relay product range. Ourparticular strength lies in the field of safetyrelays where we have traditionally beenassuming a pioneer role. Some of these“firsts” are listed below: Reinforced insulation, also between
contacts Failure-tolerant contact sets Extremely flat, with reinforced insulation Twin relays
More information
Please order our Encoder Catalog.Please contact your local distributor.
More information
Please order our Relay Catalog onCD-ROM and brochures.Please contact your local distributor.
More information
Please order our Printers and Cutters Catalog.Please contact your local distributor.
Components 20018 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
1. Customer service– always remains close to you – thanks toour extensive sales & distribution network.Please contact your local Hengstler distri-butor, addresses see following pages.Talk to Hengstler.
We offer solutions.
2. World-wide representationYou will always find a friendly contact atHengstler – wherever you are in the world.Our experienced, competent partners arefamiliar with your branch – just get in touch.Please contact your local Hengstler distri-butor, addresses see following pages.
3. Always on the safe sideQuality and reliability of our products areour top priority. Our quality management system is DQS-cer-tified to DIN EN ISO 9001.Reg. No. 1540-01.
4. DeliveryYour orders are shipped on time, at the deli-very dates requested by you and also as part-shipments, if required. Customer orders arealways entered directly, which ensures highflexibility and short delivery times despiteour wide range of different products. And –if there should be an emergency despite allcareful planning – we’ll be prepared to shipat once.
Customer Advantages
Personal customer service Many years of experience
Customer Advantages
We’re there for you - wherever you are – worldwide
Our Top Service for You
5. Repair ServiceCustomer complaintsWe are always there for you if there shouldbe any problems.Please contact your local Hengstler distri-butor, addresses see following pages.
1
2 3
4
5
6. Technical SupportIf you should have any technical questionsconcerning your product selection or speci-fic application – get fast and competenthelp from:Tel.: +49 7424- 89 539 or 462Or by e-mail: uli.hezinger@hengstler.deor claus.grimm@hengstler.deor norbert.weber@hengstler.de
Customer Advantages
Emergency Service Repair/Customer Complaint Report
Customer Advantages
OvernightIf you order a product from ourmain product list before 10.00a.m., your order will be shipped onthe same day.
Our Repair Team at Hengstler
6
Customer Advantages
Quick response to your technicalqueries.
9Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
We’re there for you – wherever you are
Components 200110 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
ArgentinaNeumann S.A.Peru 2451067 Buenos AiresTel. 5411-4-768-3449Fax 5411-4-764-2388
AustraliaAutomated ControlEngineering Group Pty Ltd. 1/8 Pennant StreetCardiff NSW 2285Tel. (02) 4954 5004Fax (02) 4956 7686e-mail: ace001@bigpond.com
AustriaJosef ZimmerFahrzeug- und IndustriebedarfHetzendorfer Straße 551121 WienTel. (01) 804 1523-0Fax (01) 804 1523-48e-mail: Office@josefzimmer.at
BelgiumGeveke Industrial BelgiumHengstler BelgiumLeuvensesteenweg 250 A1800 VilvoordeTel. 0032-2257.02.40Fax 0032-2257.02.49e-mail: info@geveke.bewww.geveke-industrial.be
BrasilVeeder Root do BrasilCom. e. Ind. Ltda.Rua Ado Benatti, 92Sao Paulo SPCEP 05037-904Tel. 5511 861-2155Fax 5511 861-1982e-mail: dlassner@veeder.come-mail: Antonio_Araujo@veeder.com
ChileVignola y Cia. Ltda.P.O. Box 93-VCPIO-Subida El Peral 25ValparaisoTel. 0056-3225-6521Fax 0056-3225-8571
ChinaAutomate Control Engineering LtdRoom 21 C122, 2/F, Huaqiang Electronics World1015 Huaqiang North Road ShenZhenGuangdong, China.Postal code: 518031Tel: 86-755-3687900Fax:86-755-3687846E-mail:automate@public.szptt.net.cn
ChinaBeijing Westman Automation Technology Ltd Co.No. 1162, SanCaiTang Building,No. 96, Chengfu Road, Haidan district,Beijing 100084, P.R. ChinaTel: 86-10-82629897Fax: 86-10-82620443Email: xxsun@public3.bta.com.cn
ColumbiaThomas H. HoeckApartado Aero 51660Bogotá 2 D.E.Tel. (01) 2357618Fax (01) 2356090
Czech RepublicSETRON, s.r.o.K Mejtu 1114200 Praha 4-PlsniceTel. (02) 61910222Fax (02) 61910225e-mail: setron@setron.czEurotel: 0601-211355– not for „Printers“
DenmarkJemaks A/SKirke Vaerløsevej 263500 VaerløseTel. (44) 486600Fax (44) 486651e-mail: jemaks@jemaks.dkhttp://www.jemaks.dk
EgyptThe Central Agency, (Sabri + Part.)Building No. 13, Zone 9 Misr TameerMassaken Sheraton, Cairo, EgyptTel. (202) 2678775/2677640/2677641Fax (202) 2677960P.O.Box 5135 HeliopolisPostal Nr. 11361 Heliopolis El HorreyaCable: Sabrem Cairoe-mail: tcasabri@egyptonline.com
- only textile industry
FinlandSensorola OyP.O.Box 62Kielotie 14 B01301 VantaaTel. 0358-9-8386460Fax 0358-9-8572205e-mail: myynti@sensorola.fihttp://www.sensorola.fi
FranceHengstler Contrôle Numérique SARLZ.I. des Mardelles94-106 Rue Blaise Pascal, B.P. 7193602 Aulnay-sous-Bois, CédexTel. (01) 48795501Fax (01) 48795561
GuatemalaImpex Ltda.1a Avda. 10-81Zona 108é NivelCiudad de GuatemalaTel. 502 332 7432Fax 502 332 7431
Great BritainWest InstrumentsThe HydeBrighton, East SussexBN2 4JU, EnglandTel. +44 (0) 1273 606271Fax +44 (0) 1273 609990
Great BritainJ. Darbyshire + Son Ltd.7, Tudor Close, CarletonPoulton-le-FyldeBlackpool Lancs. FY6 7TDTel. (01253) 893878Fax (01253) 891020
GreeceControl System Ltd.Giannitson 57546 27 ThessalonikiTel. (031) 527228Fax (031) 515495
Hong KongHilford Trading LimitedRoom 110211/F Park-In Commercial Centre56 Dundas StreetMongkok, KowloonTel. (852) 2624-5956Fax (852) 2760-8993e-mail: hilford@netvigator.com
Distributor:Automate Control Engineering LtdUnit 1505 Entrepot Centre,117 How Ming Street, Kwun Tong,Kowloon, Hong KongTel: 852-2342-7276Fax: 852-2342-7229e-mail: automate@netvigator.com
HungaryC+D Automatika KFTPostfach 1561701 BudapestTel. (0036) 1 2829 896Fax (0036) 1 2823 125e-mail: cdaut@mail.inext.huhttp://www.cdaut.hu
IndiaProximon Controls Pvt. Ltd.202, Krishna Laxmi Industrial ComplexPokhran Road No. 1Vartak NagarThane – 400 606Tel. +91-22-544 80 37 orTel. +91-22-544 80 38Fax +91-22-544 80 39e-mail: proximon@vsnl.comhttp://www.proximon.com
Indonesia Singapore
IsraelDies Company Ltd.„Paz-Hateomim Center“Mishmar HashivaP.O. Box 21125Tel-Aviv 61211Tel. (03) 9605008Fax (03) 9605004e-mail: dies@dies.co.il
ItaliaHengstler Italia S.r.l.Via G. Cavalcanti 520127 Milano Tel. (02) 26821943Fax (02) 26821953e-mail: info@hengstler-italia.com
JapanHengstler Japan Corporation Tokyo1–8–5, Asagayaminami Suginami-KuTokyo 166-0004Tel. (03) 5306-0150Fax (03) 5306-0160
Hengstler Japan Corporation Osaka2–12–23, Minamikaneden Suita-shiOsaka 564-0044Tel. (06) 6386-8001Fax (06) 6386-5022e-mail: mailmaster@hengstler.co.jp
KoreaDae-Hyun Sangong Co., LtdRoom 401, An Sung Bldg.#410-13, Sindonm, Kuro-guSeoul 152-070Tel. 0082-26791627Fax 0082-26791628e-mail: cyberist@shinbiro.com
LebanonIncotel ElectronicsFacing Dora GateBeirutTel. 00961-1-240003Fax 00961-1-252276e-mail: incotel@cyberia.net.lb
Luxemburg Belgium
Sales International Counters, Encoders, Controllers, Printers
11Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
MalaysiaFarnell Electronic Sdn BhdNo. 6-2, (1st Floor), Jalan USJ 9/5NSubang Business Centre, UEP Subang Jaya47620 Subang Jaya, Selangor Tel. 60-3-7245748Fax 60-3-7245766e-mail: farnell@tm.net.my
MexicoComp. Ferretera Mexicana S.A. de CV.16 de Septiembre No. 58 Apartado Postal 14806000 Mexico, D.F. Tel. (05) 7471984Fax (05) 5211707e-mail: bokersa@data.net.mx
NetherlandsGeveke IndustrialDe Meerheuvel 6a5221 EA ’s-HertogenboschPostbus 22325202 CE’s HertogenboschTel. +31-(0) 73-6391639Fax +31-(0) 73-6391699e-mail: info@gin.geveke.nlwww.geveke-industrial.nl
New ZealandEMC Industrial Group Ltd.P.O. Box 101444NSMC, AucklandTel. (09) 415 5110Fax (09) 415 5115e-mail: sales@emc.co.nz
NorwayHecotron Industriell Elektronikk ASPostboks 4269, TorshóvGunnar Schjelderupsv. 90401 OsloTel. (22) 159615Fax (22) 229365e-mail: hecotron@hecotron.no
PeruIng. E. Brammertz S.C.R.L.Apdo. 0173Miraflores-Lima 18Tel. +51-1-445 81 78Fax +51-1-445 01 81e-mail: braming@terra.com.pecosapidata.com.pe
PhilippinesJMTI Industrial CorporationRM 203 Comfoods BuildingSen. Gil Puyat Ave.Makati Metro ManilaTel. 0063-32-8446326Fax 0063-32-3460763
PolandControla Sp. z.o.o.ul. Pasa.z Ursynowski 102-784 Warszawa 1Tel. 022-6489689, 6485777, 6485878Fax 022-6489688, 6485874e-mail: controla@pro.onet.pltel. kom. 0602 728 557
– not for „Printers“
PortugalAntonio Maria Tavares Jr. Lda.Apartado 49974017 Porto CodexTel. (02) 3320022Fax (02) 2084132e-mail: amtj@mail.telepac.pt
SingaporeHengstler GmbHCorporate Representative OfficeMr. Fred Tay246 MacPherson Road#08-01 Betime BuildingSingapore 348578Tel. 65-7459265, Fax 65-7461791Pager: 94158924e-mail: fred_tay@mbox5.singnet.com.sg
TDS Technology (S) Pte Ltd.64 Sungei Kadut Loop(HOCEN Building, 3rd. Storey)Singapore 729493 Tel. (65) 366 1661Fax (65) 362 1661e-mail: stella@tdstech.comhttp://www.tdstech.com
SloveniaTIPTEH D.O.O.Cesta V Gorice 401111 LjubljanaTel. (061) 200 51 50Fax (061) 200 51 51e-mail: damijan.jager@abm.sihttp.//www. tipteh.si
South AfricaCountapulse Controls (Pty) Ltd.Cleveland, 2022P.O. Box 40393313 Jules StreetMalvern, 2094Tel. (011) 615 7556/7/8Fax (011) 615 7513e-mail: countap@iafrica.com
SpainHengstler España S.A.C/Córcega, 541, 2° 1a08025 BarcelonaTel. +34-93 435.51.50 / 64.28 / 76.92Fax +34-93 347.92.60e-mail: hengstler@hengstler.es
HorbaraTxomin Garat 448004 BilbaoTel. (94) 4119011Fax (94) 4110397
SYSTELECAvda. de Somosierra, 12 2A28700 San Sebastián de los Reyes28028 MadridTel. (91) 658 8800Fax (91) 651 0939
SpainCydelec S.L.C/Chiva No. 546018 ValenciaTel: (96) 354-00-73Fax:(96) 382-12-85
SpainConteleinC/Dr. Aznar Molina 1750002 ZaragozaTel. (976) 200971Fax (976) 393327
SwedenA. Karlson Industriteknik ABBox 290Storsätragrad 4-612725 SkärholmenTel. 08-52200500Fax 08-52200510e-mail: info@akarlson.se
SwitzerlandDigana AGRotackerstrasse 218304 WallisellenTel. (01) 8300893Fax (01) 8300807e-mail: Info@digana.ch
Taiwan R. o. C.King-E Lu Ltd.10F-3, No. 20 Min Chuan West RoadP.O. Box 68-118118 TaipeiTel. (02) 25223056Fax (02) 25319692
Distributor:Rotech Enterprise Co. Ltd.6F,No.3,Lane 26,Kuang-Fu N.RoadTaipeiTel: 886-2-25781261Fax: 886-2-25784348
ThailandIndustrial Electrical Co., Ltd.85/2, 85/3 Soi Sot Phin SanRang Nam Road, Rajthevee10400 BangkokTel. 66-2-642-6700Fax 66-2-642-4250e-mail: iecl@ie.co.thhttp://www.ie.co.th
TurkeyArslan Elektronik Doz. Dipl.-Ing. Osman Arslan Lüleci Hendek Caddesi No. 4780020 Karaköy-IstanbulTel. 0212-234627 / 2493134Fax 0212-251 8385 + 2925776Cep Tel./Handy (0532) 485 7257e-mail: arslane@turk.nethttp://abone.turk.net/arslane
U.A.E.United Arab EmiratesDescon Trading L.L.CP.O. Box 14675DubaiTel. 00971-4-2653651Fax 00971-4-2653264e-mail: basusil@emirates.net.ae
USADanaher Controls1675 Delaney RoadGurnee, IL 60031-1282Tel. (847) 662.2666Fax (847) 662.6633e-mail: dancon@dancon.comhttp://www.dancon.com
Danaher Controls2100 W. Broad StreetElisabethtown, NC 28337Tel. 910-862 2511Fax 910 862 5400http://www.dancon.com
HECON25 A Abe Voorhees DriveOld Squan Plaza, Manasquan, NJ 08736Tel. (732) 223-4200Voice Mail Extension: 212Fax (732) 223-4999e-mail: DWidmann@hecon.comhttp://www.hecon.com
- only for Printers + Cutters
VenezuelaVictor Rafael Escobar + CA.Apartado de Correos, 50 113Caracas-1050-ATel. (02) 715235/729059Fax (02) 7629059
VietnamHoang Quoc Co. Ltd.509 Kim Ma Str.Hanoi-S.R.VietnamTel: 0084-4-8317421Fax: 0084-4-8317433e-mail: hoangquoc@hn.vnn.vn
Sales International Counters, Encoders, Controllers, Printers
Components 200112 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput control
Frequency
PrescalerReset input
Control inputs
Counting modeAdd modeDifference modeCounting directionAdd/Add ModePhase DiscriminatorOutput
Page
Small, compact,5 different versions
Voltage supply via lithium cell or 12-24 VDC
8-digit LCD or 6-digit LED display
Programmable counting frequencyand active edge
High-voltage version for 12-250 VDC/AC input pulses
Optional with prescaling function;decimal point andoutput signal
48 x 24 x 32 short48 x 24 x 60 long45 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 65Li battery, type 1+3,12-24 VDC
PNP/NPN, type 3 with 12-250 VDC/AC7.5 kHz / 30 Hz, type 3; 20 HzOptional, 0.001-99.999NPN type 1+2, type 3 with12-250 VDC/ACNPN/PNP Type 4-5Optional: 2nd counterinput, keyboard lock orgate input
StandardOptional type 5
Optional Type 4+5Optional as transistorPNP or display
70
Multifunctional, usedas counter, tacho-meter, time counter,shift or batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Offering a large varietyof programmable functions
Without or with 1 or 2 presets
Freely adjustable prescaling
Programmable keyboard lock
Integrated totalizingcounter
48 x 48 x 93.5
45 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPN
5 kHz / 30 Hz
0.001-999.999PNP/NPN
2nd counter input andgate input
ProgrammableProgrammableProgrammableProgrammableProgrammableWithout, or with 1 or 2 relaysand transistor outputs77
Totalizing counterwith large, 8-digitLCD display; illuminated
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 36
68 x 33LCD 8-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPN
10 kHz / 30 Hz
Optional 0.0001-99.9999NPN
Keyboard lock
StandardOptional
OptionalOption as SSR output
80
Large dual-colour, 5-digit LED display;digit height 18.5 mm
Programmable displaycolour
Upgrading options(e.g. RS 485)
Service-friendly dueto plug-in system
Complete functions by8 counter versions and5 process indicators
96 x 48 x 100
92 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC
PNP/NPN
10 kHz / 200 Hz / 20 Hz
0.0001-9.9999NPN
2nd counter input andkeyboard lock
ProgrammableProgrammableProgrammableProgrammableOptional with 1 or 2 relaysand transistor outputs83
Type tico 731 tico 732 tico 734 tico 735P1
13Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)DisplayProtectionSupply voltage
InputsInput controlFrequencyPrescalerReset input
Control inputs
Counting modeAdd ModeDifference modeCounting directionAdd/Add ModePhase Discriminator
Output
Page
Large 6-digit LED display
Voltage supply 12-24 VDC or 115/230 VAC
Connections via plug-in screw terminals
Very high countingfrequency up to 40 kHz
With or without 2limit values, for use asrelay and transistor
Options: RS 232 or RS 485
96 x 48 x 10892 x 45LED 6-digit, 14 mmIP 5412-24 VDC; 115/230 VAC
PNP/NPN40 kHz / 30 Hz0.0000-99.9999PNP/NPN
Gate input, reset enableand keylock input
ProgrammableProgrammable
1-,2-,4-fold programmingVersion with 2 limit values; for use as relay or transistor
86
Totalizing counter,plugs into modularsystem 400
Voltage supply 12-24 VDC
6-digit LED display Versions with gate
input, display memoryor direction input
With or without frontreset key
Accessories: panelframe and connectionbox
50 x 25 x 8850 x 25LED 6-digit, 7 mmIP 5412-24 VDC
PNP or NPN5 kHz / 30 Hz
PNP, NPN, depending on versionGate input, display hold, counting direction, depending on version
Standard
Depending on version
93
Type signo 727 Type 710
Components 200114 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digits/Digit heightProtectionPulse voltage
Power consumption
Reset
Operating temperature
Duty cycleAccessories
Dimensions (mm)(including panel frame) Cutout (mm)(including panel frame )
Page
4-, 6- or 8-digit display
With manual/electri-cal reset or withoutreset
Plugs into modularsystem 400
Convenient for service
50 x 25 x 75.5
50 x 254-8 depending on version/4 mmIP 4024 VDC; 24 VAC; 115 VAC; 230 VACDC 2.5 W, AC 2.75 VA
Without reset, with manual or electrical reset, depending on version- 10…50 °C
100 % at 25 °CPanel frameconnection box60 x 50 x 88
55 x 29.5
95
4-, 6- or 8-digit display
With manual/electri-cal reset or withoutreset
Plugs into modularsystem 400
Convenient for service
56 x 40 x 72.555 x 28 x 72.552 x 276; 8 depending on version/4 mmIP 4024 VDC; 24 VAC; 115 VAC; 230 VACDC 2.5 W, AC 2.75 VA
Without reset or withmanual reset, dependingon version
- 10…50 °C
100 % at 25 °C
97
Small mountingdimensions
Low power consumption
Standard connections Suitable for PCB
mounting Machine-solderable
and washable
25.2 x 31 x 14.630 x 20 x 4027 x 14.2 only .86, optional 7/4 mm (visual)IP 655; 12; 24 VDC
50-440 mW depending on version
- 10…50 °C; optional - 40…+ 85 °C100 % at 25 °C
99
Small AC voltagecounter
Low power consumption
Easy to install Protection IP 66
30 x 20 x 58.3
27 x 14.46/4 mm (visual)IP 6624; 115; 230 VAC
85-600 mW
-10…50 °C
100 % at 25 °C
102
Type Type 464-468 Type 864-868 Type 634 / 635 Type 635 iw
15Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digits/Digit heightProtectionPulse voltage
Power consumptionReset
Operating temperatureDuty cycleAccessories
Page
For DIN rail mounting Wide voltage range Screw-type terminals Without reset
function
25.5 x 68.5 x 28
6/4 mmIP 105/12/24 VDC;115/230 VAC
80 - 665 mW
- 10…50 °C100 % at 25 °C
104
Small mountingdimensions
4-,5-,6- or 7-digitdisplay
Connections withAMP plug
For surface mountingor base mounting
With or without resetfunction
31.5- 38 x 26.5 x 75
32 - 38.5 x 274; 5; 6; 7 depending on version 4 mmIP 4012; 24 VDC; 24; 110230 VACDC 1.5 W, AC 2.5 VAWithout reset or withmanual reset, dependingon version- 10…50 °C100 % at 25 °CMounting base
106
Small mountingdimensions
6- or 7-digit display Protection IP 54 For base mounting,
surface mounting orflush mounting
46 x 46 x 55 with front panel; 40 x 24.5 x 5540.5 x 256 or 7, depending onversion 4 mmIP 4024 VDC
1.7 W
- 10…50 °C100 % at 25°Mounting base
108
Surface mounting Easy to install Pushbutton reset
53 x 100 x 26
6/4 mmIP 1024 VDC; 230 VAC
DC 2.75 W, AC 4 VAManual
- 10…50 °C100 % at 25 °C
110
Type Type 635 DIN Type 872-877 Type 869 Type 853
Components 200116 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Mechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)No. of digitsDigit heightProtectionReset functionDrive
Torque/Actuating distanceMax. speedMax. strokeTransmission ratioMounting
Accessories
Page
4-digit hand tally Mounting by means of
thumb ring; for wallor bench-mounting
Reset via rotary knob Rugged and simple Maintenance-free
operation
60 x 60 x 26
44 mm
Manual, via rotary knobHand button
1:1Suitable for manualmounting,wall or bench mounting
112
Small mechanicalrevolution and strokecounter
4- or 5-digit display For flush- or surface
mounting With or without case Without reset
function
34.8 x 32 x 20
4 or 5 4.2 mm
Shaft, right or left
0.05 Ncm, stroke counter1.0 Ncm1000/100 r.p.m.500 strokes/min1:1 / 1:10Flush-mounting case,surface-mounting case
Stroke lever
113
4-digit hand tally,revolution and strokecounter
With key reset func-tion
Small dimensions
54 x 45 x 43.5 hand tally,53 x 28.4 x 3544 mmIP 50Manual, via reset keyShaft, right or left
1500/500 r.p.m.500 strokes/min1:1 / 1:10Baseplate
Stroke lever, measuring wheels
115
6-digit revolution,length and strokecounter
Length counter PTB-approved
With key reset function
80 x 45 x 43.5
6 4 mmIP 50Manual, via reset keyBoth sides; stroke counter right or left0.2 Ncm, stroke counter5 Ncm3000/1500 r.p.m.500 strokes/min1:1 / 1:2 / 1:10Baseplate
Stroke lever, measuring wheels
117
Type Type 344-346 Type 101/103/301/309 Type 125 Type 150
17Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Mechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)No. of digitsDigit heightProtectionResetDrive
Torque/Actuating distance
Max. speedMax. strokeTransmission ratioMounting
Accessories
Page
Length counter withkey reset
7-digit display Large digits, 8 mm
92 x 80 x 4878 mmIP 53Key resetBoth sides
0.5 Ncm
3000 digits/min
1:2 / 1:5 / 1: 10Baseplate
Measuring wheels
118
Stroke counter withkey reset
7-digit display Large digits, 8 mm
92 x 80 x 4878 mmIP 53Key resetBoth sides
8.6 Ncm
500 strokes/min1:1Baseplate
Stroke lever
119
6-digit revolution,length and strokecounter
Length counter PTB-approved
With key reset Large digits, 6.5 mm
132 x 70 x 74.266.5 mm
Manual, via reset keyBoth sides, front, rear,bottom1.2 Ncm, stroke counter8 Ncm
10.000 digits/min800 strokes/min1:1 / 1:5 / 1: 50Baseplate
Stroke lever, measuringwheels
120
Non-contact counterwith magnetic drive
Small mountingdimensions
Protection IP 66 Maintenance-free
operation Easy to mount
27 x 25 x 20.264 mm, visual digit heightIP 66
Via Fe, N- or S-pole magnetsFe = 0.5 mm; N+ S polemagnets depending on strength
ZOB = Without plateZBO = Top plateZBH = Rear plateZBL = Left plateMounting plates,Hose clampsMagnets
122
Type Type 205 Type 312 Type 225 Colibri
Components 200118 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlFrequencyPrescaling factorReset inputControl inputs
Count ModeAdd Mode orSubtracting ModeDifference ModeCount Direction ModeAdd/Add ModePhase DiscriminatorOutput
Page
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Offering a largevariety of programma-ble functions
Without preset orwith 1 or 2 presets
Freely selectable pres-caling function
Programmable keyboard lock
Integrated totalizingcounter
48 x 48 x 93.545 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPN5 kHz / 30 Hz0.001-999.999PNP/NPN2nd counter input andgate input
Programmable
ProgrammableProgrammableProgrammableProgrammableWithout, or with 1 or 2 relays and transistor outputs
131
Preset counter withlarge, 8-digit LCD display; illuminated
Voltage supply viaexchangeable lithiumcells
Small mounting depth SSR output Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 3668 x 33LCD 8-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPN10 kHz / 30 Hz0.0001-99.9999NPNKeyboard lock
Programmable
OptionalProgrammable
OptionalSSR output, with optional moduleas relay output
134
Large dual-colour, 5-digit LED display;digit height 18.5 mm
1 or 2 presets Programmable display
colour Upgrading options
(e.g. RS 485) Service-friendly due
to plug-in system Complete functions
due to 8 counter versions and 5 processindicators
96 x 48 x 10092 x 45LED 5 digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC
PNP/NPN10 kHz / 200 Hz / 20 Hz0.0001-9.9999NPNKeyboard lock
Programmable
ProgrammableProgrammableProgrammableProgrammableOptional with 1 or 2 relays and transistor outputs
137
Preset counter with 5-digit LED display
Keyboard foil Correction value Prescaling factor from
0.001-9.999 with PNPoutput for totalizingcounter
Service-friendly dueto plug-in screw ter-minals
Suitable for a varietyof applications due tocontrol input andmany different versi-ons
Keyboard lock
48 x 48 x 10845 x 45LED 5-digit, 7 mm
IP 5412-24 VDC, 24 VAC100-240 VAC versions
PNP/NPN5 kHz / 30 Hz0.001-9.999PNP/NPNKeylock, Gate, DisplayHold or Up/Down input
Programmable
Optional
With 1 or 2 relays ortransistor outputs
140
Type tico 732 tico 734 / 007 tico 735P7/P8 signo 721
19Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlFrequencyPrescaling factorReset inputControl inputs
Count ModeAdd ModeDifference ModeCount Direction ModeAdd/Add ModePhase Discriminator
Output
Page
Large 6-digit LED display
Voltage supply 12-24 VDC or 115/230 VAC
Connections via plug-in screw terminals
Very high countingfrequency up to 40 kHz
2 Presets (as relay andtransistor); one presetis programmable as atrailing preset
Reproducible, freelyselectable set value
Optional with RS 232or RS 485 interface
96 x 48 x 10892 x 45LED 6-digit, 14 mm
IP 5412-24 VDC; 115/230 VAC versions
PNP/NPN40 kHz / 30 Hz0.0000-99.9999PNP/NPNGate input, display holdand keylock input
ProgrammableProgrammable
1-,2-,4fold programmable2 preset outputs (relay and transistor)
143
Large 6-digit LCD display with permanently visiblepresets
Voltage supply 12-24 VDC or 100-240 VAC
Connections via plug-in screw terminal
Counting frequencyup to 10 kHz
2 presets (relay andtransistor)
With batch counterand batch preset
Optional with totalizing counter
Optional with RS 485interface Profibus orSuconet
72 x 72 x 10868 x 68LCD 6-digit, 13 mm2xLCD 6-digit, 6 mmIP 6512-24 VDC; 24 VAC; 100-240 VAC versions
PNP10 kHz / 30 Hz0.0005-99.9999PNPGate input, display holdbuffer and keylock input
ProgrammableProgrammable
1-,2-,4-fold programmable2 presets (relay andtransistor), batch preset (transistor)
151
Large 7-digit LED dis-play with permanentlyvisible presets
Voltage supply 12-24 VDC or 100-240 VAC
Connections via plug-in screw terminals
Counting frequencyup to 20 kHz
2 presets Trail output With batch counter
and batch preset Reproducible, freely
selectable set value Programmable out-
puts and operatingmodes
Optional with RS 485 or RS 232 interface
144 x 72 x 108138 x 68LED 7-digit, 14 mm2xLED 6-digit, 7 mmIP 6412-24 VDC; 24 VAC; 100-240 VAC versions
PNP20 kHz, 5 kHz, 30 Hz0.0001-99.9999PNPGate input, display buffer inputRes+Out and keylockinput
ProgrammableProgrammable
1-,2-,4-fold programmable3 presets (relay and transistor), batch preset, direction output (transistor)
157
Large 7-digit LED dis-play with permanentlyvisible presets
Voltage supply 12-24 VDC or 100-240 VAC
Connections via plug-in screw terminals
Monitoring of 5 shiftswith totalizing counter
Integrated operatinghour meterand tachometer
2 presets (relay andtransistor)
144 x 72 x 108138 x 68LED 7-digit, 14 mmLED 6-digit, 7 mmIP 6412-24 VDC; 24 VAC;100-240 VAC versions
PNP1 kHz, 30 Hz0.0001-99.9999PNPGate input, Res+Outinput, shift reset andkeylock input
ProgrammableProgrammable
1-,2-,4-fold programmable2 presets (relay andtransistor)
165
Type signo 723.1 signo 723.5 signo 724 signo 724-S
Components 200120 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlFrequencyReset inputControl inputsCounting modeAdd ModeOutput
Accessories
Panel frame dimensions (mm)Panel frame cutout (mm)
Page
Single-channel presetcounter
6-digit LED display Adding or subtracting
counting direction Relay or transistor
outputs Preset input via
10-key keypad Plugs into modular
system 400
50 x 50 x 95.550 x 50LED 6-digit, 7 mm
IP 5412-24 VDC; 24, 115 or 230 VAC via power supply module
PNP/NPN5 kHz / 30 HzPNP or NPN
Standard
1 preset (relay or transistor version)Panel frame, connection box, power supplies60 x 75 x 88
55 x 29 x 55
169
Repeating module; 1preset
3-digit preset key forsimple entry
LED indicators forinput and output signals
Relay or transistoroutputs
Plugs into modularsystem 400
50 x 50 x 95.550 x 502 LED indicators3 preset keysIP 3012-24 VDC, 24, 115 or 230 VAC via power supply module
PNP or NPN5 kHz / 30 HzPNP
Standard
1 preset (relay or transistor version)Panel frame, connection box, power supplies60 x 75 x 88
55 x 29 x 55
172
Type Type 711 Type 781.4
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
Digit heightProtectionPulse voltage
Power consumptionReset
Operating temperatureDuty cycleAccessories
Dimensions (mm)(with panel frame)Panel frame cutout (mm)
Page
Adding preset counter Display 3-digit or
5-digit with perma-nently visible presets
Manual, electrical, orautomatic reset
Plugs into modularsystem 400
Easy to service
50 x 50 x 92.5
50 x 503; 5, depending on version 4 mmIP 3024 VDC, 24 VAC,115 VAC, 230 VACDC 2.5 W; AC 2.75 VAManual, electrical -depending on version;optional: automatic reset- 10…50 °C100 % at 25 °CPanel frame, connectionbox, reset automaticmodule100 % duty cycle module60 x 75 x 88
55 x 55
174
Adding preset counter Display 3-digit or
5-digit with perma-nently visible presets
Manual, electrical, orautomatic reset
Available with diffe-rent front panel sizes
Compact design
60 x 75 x 72.555 x 53.2 x 72.552 x 523; 5, depending on version 4 mmIP 3024 VDC, 24 VAC,115 VAC, 230 VACDC 2.5 W; AC 2.75 VAManual, electrical -depending on version
- 10…50 °C100 % at 25 °C
176
Subtracting presetcounter
Display 3-digit or 5-digit with perma-nently visible presets
Manual, electrical, orautomatic reset
Plugs into modularsystem 400
Easy to service
50 x 50 x 92.5
50 x 503; 5, depending on version 4 mmIP 3024 VDC, 24 VAC, 115 VAC, 230 VACDC 2.5 W; AC 2.75 VAManual, electrical -depending on versionoptional: automatic reset- 10…50 °C100 % at 25 °CPanel frame, connectionbox, reset automaticmodule100 % duty cycle module60 x 75 x 88
55 x 55
178
21Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Preset Counters
Type Type 486–487 Type 886–887 Type 446 / 447
Features
Technical DataDimensions (mm)(Width x Height x Depth)DigitsDigit heightProtectionReset
Drive
Torque/Actuating distanceMax. speedMax. no. of strokesTransmission ratioMountingAccessories
Page
5-digit indication, revolution, length andstroke counter
Subtracting countingdirection
Large stroke keys forpreset input
Pushbutton reset Large digits, 6.5 mm
132 x 70 x 74.256.5 mmIP 40; connections IP00Manual reset via reset keyBoth sides, front, back, bottom1.2 NcmStroke counter 8 Ncm10.000 digits/min.800 strokes/min.1:1 / 1:5 / 2:1 / 5:1BaseplateStroke levers, measuring wheels
180
Components 200122 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Mechanical Preset Counters
Type Type 250
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
Temperature rangeInputsMeasuring range
ScanningAccuracyControl inputs
OutputsAlarms
Auxiliary voltage
Page
Integrated miniaturePLC indicator
8-digit LCD display or6-digit LED display
Clock and data signalcontrol (bit-serial)
Graphics or BCD mode Simple protocol Key evaluation
48 x 24 x 6045 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 6512-24 VDC
- 10-50 °C
PNP/NPN - adjustable
max. 1200 baud
Clock and data signals bit-serial
PNP max. 10 mA, as longas the key is pressed
186
Large dual-colour, 5-digit LED display ;digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Non-linear displayscaling up to 10points
Tare/offset function Alarm duration
indication Totalizing of process
values by integration
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VAC or 90-264 VAC0-55 °C
0/4 -20 mA; 10-50 mA0/2-10 V; 0/1-5 V;± 100 mV; ± 10 V100 ms0.01 %Programming lock or Tare function
2 transistor outputs1 relay (changeover)Optional: 2nd relay
24 VDC; max. 30 mA
190
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Free scaling Input range can be
trimmed Alarm length
indication Sensor break
detection after twoseconds
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC0-55 °C
J,T,K,N,B,R,S, PT 100
250 ms0.1 %Programming lock
2 transistor outputs1 relay (changeover contact)Optional: 2nd relay
190
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Free scaling Input range can be
trimmed Alarm length
indication Up to 600 V
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 5412-24 VDC; 24 VAC or100-240 VAC0-50 °C
100 mV…600 V1 mA…1A
250 ms0.1 %Programming lock
2 transistor outputs1 relay (changeover contact)Optional: 2nd relay24 VDC; max. 30 mA
190
23Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
PLC and Process IndicatorsWith limit values
Type tico 731 PLC Indicator tico 735 tico 735 tico 735 DC Process Indicator Temperature Indicator volt/amp Indicator
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
Temperature rangeInputsMeasuring range
Scanning frequencyAccuracyControl inputs
OutputsAlarms
Auxiliary voltage
Page
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Free scaling Alarm length
indication
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-25 VDC; 20-50 VAC, or 90-264 VAC0-55 °C
1 V … 600 V 1 mA…1 A
250 ms0.1 %Program lockout
2 transistor outputs1 relay (changeover contact)Optional: 2nd relay24 VDC, max. 30 mA
190
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Non-linear displayscaling up to 10points
Alarm length indication
Tare/offset function Total rate indication
by integration
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-25 VDC; 20-50 VAC or 90-264 VAC0-55 °C
1-100 mV ± 100 mV (under preparation)100 ms0.03 %Program lockout or Tare function
2 transistor outputs1 relay (changeover contact)Optional: 2nd relayBridge supply 5 V, or 10 V, 60 mA
190
Components 200124 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type tico 735 AC volt/amp. tico 735 measuring indicator bridge
Process Indicators with Limit Values
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput control
Time format
Measuring principle
Reset input
Control inputs
Output
Page
Small, compact,5 different versions
Voltage supply via lithium cell or 12-24 VDC
8-digit LCD or 6-digit LED display
Two versions with different time rangesfor each type
High-voltage versionfor 12-250 VDC/ACinput pulses
Optional with outputsignal for use asmaintenance counter
48 x 24 x 32 short48 x 24 x 60 long45 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 65Li battery, type 1+3,12-24 VDC
PNP/NPN, type 3 with 12-250 VDC/AChhhhhh.hh; hhhh:mm:ss;(LCD)hhhh.hh; hh:mm:ss (LED)
Accumulated measurement;Pulse-width
NPN type 1+2, type 3 with 12-250 VDC/AC; NPN/PNP Type 4-5Optional: Keylock or Display hold inputOptional as transistorPNP or display
202
t
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Offering a variety ofprogrammable functions
Without or with 1 or 2 presets
Offering many adju-stable time ranges
Resolution up to 1 ms Programmable
keyboard lockout Integrated sun
totalizing counter
48 x 48 x 93.5
45 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPN
Sec, min, hours, decimalpoint up to 0.000 or programmable formathh:mm:ssAccumulated or single-pulse measurement;Pulse-width or period durationPNP/NPN
2nd counter input and display inputWithout, or with 1 or 2 relays and transistor outputs
209
Totalizing counterwith large6-digit LCD display;illuminated
4 different programmable timeranges
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions of thesame design are offering different functions
72 x 36 x 36
68 x 33LCD 6-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPN
ssssss; mmmmm.m;hhhhh.h; hh:mm:ss;programmable
Accumulated measurement;Pulse-width
NPN
Keylock input
Optional as SSR output
212
25Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Time Counters
Type tico 731 tico 732 tico 734 006
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)No. of digits/
Digit heightProtectionPulse voltage
Power consumptionReset
Operating temperature
Time formatAccessories
Dimensions (mm)(including panel frame)Cutout (mm)(including panel frame)
Page
7-digit display Without reset
function DIN dimensions
48 x 24; 48 x 48 and72 x 72 via adapterframe
Low-cost Screw-type terminal
connections
48 x 24 x 40.5
45 x 22.57
5 mm (visual)IP 6612-36 VDC; 24 VAC;115 VAC; 230 VAC; further voltages availableas optionsDC 0.75 W; AC 0.7 VANone
- 10…50 °C
hhhhh.hhPanel frame adapter
54 x 29; 48 x 48; 52 x 52;72 x 72; D 73; D 5850 x 25; 45 x 45; D 50;68 x 68; D 50; D 50
215
7-digit display Without reset
function DIN-rail mounting Compact design Low-cost Screw-type terminal
connections
48 x 70 x 49
7
5 mm (visual)IP 6612-36 VDC; 24 VAC;115 VAC; 230 VAC; further voltages availableas optionsDC 0.75 W; AC 0.7 VANone
- 10…50 °C
hhhhh.hh
217
6- or 7-digit display Manual reset function
or without reset function
Plugs into modularsystem 400
Easy to service
50 x 25 x 75.5
50 x 256 or 7, depending on version4 mmIP 4012 VDC; 24 VDC; 24 VAC; 115 VAC; 230 VAC; depending on versionApprox. 1 VANone; manual - depending on version- 10…50 °C;
hhhh.hh or hhhhh.hhPanel frame, connection box60 x 50 x 88
55 x 29.5
219
Small building dimensions
Low power consumption
Standard connections Suitable for PCB
mounting Machine-solderable
and washable High shock resistance
25.2 x 31 x 14.630 x 20 x 4027 x 14.2; only .87
4 mm (visual)IP 655; 12; 24 VDC
Approx. 30 mWNone
- 10…50 °C; optional - 40…+ 85 °Chhhhh.hh
221
Components 200126 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Time Counters
Type Type 891 Type 891 DIN Type 478 Type 633 DC
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digitsDigit heightProtectionPulse voltage
Power consumptionOperating temperatureTime formatAccessories
Page
Suitable for DIN-railmounting
Suitable for installation in switching cabinets
Screw-type terminalconnections
Without reset function
Low power consumption
25.5 x 68.5 x 28
74 mm (visual)IP 105, 12 or 24 VDC, depending on versionApprox. 250 mW0…60 °Chhhhh.hh
223
Small AC voltagemeter
Low power consumption
Simple installation Protection class IP 65 Screw-type terminal
connections or cableconnections
30 x 20 x 5627 x 14.464 mm (visual)IP 6624, 115, 230 VAC
0.08 -1 VA- 10…50 °Chhhhh.hPanel frame
224
27Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type Type 633 DIN Type 633 AC
Electromechanical Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlTime format
Measuring principle
Reset inputControl inputsControl inputsOutput
Page
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Variety of programmable functions
Without presets orwith 1 or 2 presets
Variety of adjustabletime ranges
Resolution up to 1 ms Programmable
keyboard lock Integrated sum
totalizing counter
48 x 48 x 93.545 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPNSec., min, hours, withdecimal point up to0.000; or programmableformat hh:mm:ssAccumulated or single-pulse measurement;Pulse width or period durationPNP/NPNDisplay hold inputDisplay buffer inputWithout, or with 1 or 2 relays and transistor outputs
226
Totalizing counterwith large, 6-digitLCD display; illuminated
Different time, 4 ranges programmable
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 3668 x 33LCD 6-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPNssssss; mmmmm.m;hhhhh.h; hh:mm:ss; programmable
Accumulated measurementPulse width
NPNKeylockKeyboard lockAs SSR output
229
Large dual-colour, 5-digit LED display;digit height 18.5 mm
Programmable displaycolour
Different time, 5 ranges programmable
Upgrading options(e.g. RS 485)
Service-friendly dueto plug-in system
Complete functions by8 counter versions and5 process indicators
96 x 48 x 10092 x 45LED 5 digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC
PNP/NPNssss.s; mmmm.m;hhhh.h; mmm.ss;hhh.mm; programmable
Accumulated or single-pulse measurementPulse width
NPNKeylockKeyboard lock1 relay and transistoroutput
232
Components 200128 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Time Counters
Type tico 732 tico 734 008 tico 735P6
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digitsDigit heightProtectionPulse voltage
Power consumptionResetOperating temperatureTime formatAccessories
Dimensions, including panel frame (mm)Front panel cutout (mm)
Page
Adding preset timecounter
5-digit display withpermanently visiblepreset
Manual reset Display up to 9999.9
hours Plugs into modular
system 400 Easy to service
50 x 50 x 92.550 x 5054 mmIP 4024 VDC, 24, 115, 230 VAC1 VA / WManual- 10…50 °Chhhh.hPanel frame, connection box60 x 75 x 88
55 x 55
235
Adding preset timecounter
5-digit display withpermanently visiblepreset value
Manual reset Front panel size
55 x 53.2 Display up to 999.99
hours Compact design
55 x 53.2 x 72.552 x 5254 mmIP 4024 VDC or 230 VAC
1 VA / WManual- 10…50 °Chhh.hh
237
29Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type Type 489 Type 888
Electromechanical Preset Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlTime ranges
Functions
Reset inputInhibit inputOutput
Page
Dial for convenientand fast adjustmentof values
Programming via DIPswitches
Front-panel or DIN-rail mounting
Functions:On-delay; Off-delay; Bounce contact;clock generator
48 x 48 x 8145 x 45Dial and LED for the timing processIP 6512-24 VDC and 24-240 VAC
NPN or contact1 s; 10 s; 1 min;10 min; 1 hour; 10 hours; adjustable
On-delayOff-delayBounce contactClock generator
NPN or contact---2 relays as time change-over contacts
239
Convenient keyboardoperation
Dual-line LCD display Resolution up to 0.01
sec. Front-panel or DIN-
rail mounting Functions:
On-delay; Off-delay; Bounce contact;clock generator withstart signal
48 x 48 x 8145 x 45LCD 4-digit, dual-line
IP 6524 VDC and 24-240 VAC
NPN or contacthhhh; mmmm; ssss;hh:mm; mm:ss; withdecimal point up to 0.01 for h; m; s rangeOn-delayOff-delayBounce contactOff-delay bounce relayClock generator withstart signal
NPN or contact---2 relays as changeover contacts or with instantaneous contact
239
3 different base versions
Easy operation Dual-line LED display Resolution up to
1 msec Front-panel or
DIN-rail mounting Functions: "High
performance" with 17 different operatingmodes; "asymmetricalclock generator" withbatch counter and 2 separate presets;"Multifunction" as fortico 741
48 x 48 x 8145 x 45LED 4-digit, dual-line
IP 6522-55 VDC / 20-50 VACor 90-264 VAC
NPN or contacthhhh; mmmm; ssss;hh:mm; mm:ss;with decimal point up to 0.001 at h;m;s range"High Performance" with 17 different operating modes; "asymmetrical clock generator" with batch counter and separate input; "Multifunction" as for tico 741NPN or contactNPN or contact2 relays or 2 transistors;separately programmable
243
Components 200130 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Time Relays
Type tico 740 tico 741 tico 742
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsFrequencyPrescaling factorMeasuring principle
DisplayReset input
Control inputs
Evaluation
Output
Page
Small, compact,5 different versions
Voltage supply via lithium cell or 12-24 VDC
8-digit LCD or 6-digit LED display
Display as Pulses/min. Type 1 and 2 with gate
measuring principle;Type 4 and 5 withfaster and more accu-rate period length measuring principle
Optional with prescaling function
48 x 24 x 32 short48 x 24 x 60 long45 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mm
IP 65Li battery, type 1+3,12-24 VDCPNP/NPN7.5 kHz / 30 HzOptional, 0.001-99.999Gate time Type 1+2; period length measurement; 1 /Tau Type 4+5Pulse/min.NPN type 1+2, NPN/PNP Type 4-5Optional: keylock or display hold inputCounter input
252
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24VDC; 115 VAC, or 230VAC
6-digit LCD or LEDdisplay
Variety of program-ming functions
Without preset orwith 2 limit values
Display as pulses/sec.or pulses/min.
Programmable start-up suppression
Principle of periodlength measurement
48 x 48 x 93.5
45 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mm
IP 6512-24 VDC, 115 VAC, 230 VAC versionsPNP/NPN5 kHz / 30 Hz0.001-999.999Period length measurement, 1/Tau
Pulse/sec. or pulse/minPNP/NPN
2nd counter input and gate inputCounter input, direction A-B, A+B; phase discriminatorNone; or 2 relay andtransistor outputs
258
Tachometer withlarge, 4-digit LCD display; illuminated
4 versions frequencydisplay, scaleabletachometer, tacho-meter with totalizingcounter; and tacho-meter with totalizingcounter and pulseoutput
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 36
68 x 33LCD 4-digit tachometerOptional: 8-digit totalizing counter; 12 mmIP 65Exchangeable Li battery
PNP/NPN10 kHz / 30 HzOptional 0.001-9999Period length measurement, 1/Tau
Pulse/sec.NPN
Keylock
Counter input
Optional as SSR output for pulse scaler
261
Large dual-colour, 5-digit LED display;digit height 18.5 mm
Programmable displaycolour
Upgrading options(e.g. RS 485); linearoutput
Service-friendly dueto plug-in system
2 versions tachometerand tachometer +totalizing counter
Complete functions by8 counter versions and5 process indicators
96 x 48 x 100
92 x 45LED 5-digit, 18.5 mmDual-colour
IP 6622-55 VDC / 20-50 VACor 90-264 VACPNP/NPN10 kHz / 200 Hz / 20 Hz0.0001-99999Period length measurement, 1/Tau
Pulse/sec.NPN
2nd counter input and keylockType 4: A, A/B, 1/A; Type 5: A, totalizingcounter; A+B; A-B; etc.Optional with linear output; 1 or 2 relay and transistor outputs264
31Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Tachometers
Type tico 731 tico 732 tico 734 tico 735
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)DisplayProtectionSupply voltage
InputsInput controlFrequencyPrescaler
Measuring principle
DisplayReset inputControl inputs
EvaluationOutput
Page
Large 5-digit LED display; digit height14 mm
Frequency range1/min. - 10000/s
Prescaling function0.001 - 9.999; expandable via divisor
Easy to service bymeans of plug-typescrew terminals
Programmable start-up suppression
With or without limitvalues for frequencymonitoring
96 x 48 x 10892 x 45LED 5-digit, 14 mmIP 5412-24 VDC or 100-240 VAC
PNP10 kHz / 30 Hz0.001 - 9.999 and divisor 0-9999Period length measurement1/TauPulse/min. or pulse/sec.PNPKeylock and display hold inputCounter inputNone, or 2 relays
267
Components 200132 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Tachometers
Type signo 722
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
Operating pressureAir
InputsCount input
Frequency/Time format
Options
Reset input
Output
Page
Integrated totalizingcounter
6-digit or 8-digit display
Manual reset, pneumatic reset, orwithout reset function
Hose coupler or rapid-fit connector
Easy to install Maintenance-free
operation
60 x 51 x 6552 x 268-digit 4 mm6-digit 4 mm2-8 barFiltered (< 40 µm) oil-free
Adding
25 Hz / 8 ms
Hose coupler M5; orrapid-fit connector
Manual, pneumatic,or without reset function
276
Surface-mount totali-zing counter
6-digit display Manual or pneumatic
reset Hose coupler or
rapid-fit connector Easy to mount Maintenance-free
operation
53 x 100 x 26
6-digit, 4 mm
2-8 barFiltered (< 40 µm) oil-free
Adding
25 Hz / 8 ms
Hose coupler M5, orrapid-fit connector
Manual or pneumatic
278
Integrated presetcounter
Adding or subtracting 3-digit or 5-digit
display Integrated pneumatic
reset Convenient button
setting Adding; with
continuously visiblepreset
60 x 75 x 6252 x 523-digit 4 mm5-digit 4 mm2-8 barFiltered (< 40 µm) oil-free
Adding, subtracting; depending on version20 Hz / 8 ms
With automatic reset; hose coupler M5, or rapid-fit connectorManual, pneumatic orautomatic
On reaching the preset/zero value
281
Integrated preset timecounter
3-digit or 5-digit display
Integrated pneumaticreset
Convenient buttonsetting
Hose coupler or rapid-fit connector
Continuously visiblepreset
60 x 75 x 12252 x 523-digit 4 mm5-digit 4 mm2-8 barFiltered (< 40 µm) oil-free
Adding
Seconds, minutes, depending on versionWith automatic reset; hose coupler M5, or rapid-fit connectorManual, pneumatic orautomatic
On reaching the preset value
286
33Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Totalizing, Preset and Preset Time Counters
Type Type 495, Integrated Type 495 Type 497 Type 497for surface-mounting
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
Operating pressureAir
InputsStart input
Time range
Options
Reset
Output
Page
Integrated timer;optional for DIN-railmounting
DIN-dimensions Small mounting
dimensions No continuous air
supply required Stationary preset
value 0.2 to 300 seconds
24 x 48 x 6022.2 x 45Digit roll
2-6 barFiltered (<40 µm) oil-free
Timer is started as soonas input is pressurized
0.2-3 s; 2-30 s, 20-300 s;depending on versionHose coupler M5 orrapid-fit connector;DIN-rail mountingBy interrupting the air intakeAfter the set time haselapsed, input 1 isconnected to output 2
288
Integrated resetmodule for timers
Enables automatictimer sequences
DIN dimensions Small mounting
dimensions Stationary
preset Output signal
adjustable from 0.2 - 2 seconds
24 x 48 x 6022.2 x 45Digit roll
2-6 barFiltered (< 40 µm) Non-oiled; light oil mist is permissible
Time starts elapsing as soon as the input is pressurized0.2 - 2 s
Hose coupler M5, orrapid-fit connector
Interrupts the output forapprox. 300 ms after the set time value has elapsed
290
Non-contact actuation
Small mountingdimensions
Can be actuated bymagnetic field andiron (Fe)
No continuous airconsumption
18.2 x 40.3 x 19.6
2-6 barFiltered (< 40 µm) Non-oiled; light oil mist is permissible
Magnetic field and Feactuation
Actuating distance Fe: approx. 2 mmStrap retainer attachment
Upon actuation bymagnetic field or Fe
292
Signals the operatingstatus of pneumatichose connections
Easy to mount Connections/fittings
for 2 or 3 mm hoses(internal diameter)
Operating pressure 2-8 bar
No air consumption
30 x D9
Yellow signal indication(while being pressurized)2-8 barFiltered (< 40 µm) Non-oiled; light oil mist is permissible
Upon application ofpressure
As long as the hose is pressurizedFittings for hose diameters 2 or 3 mm(internal diameter)
293
Components 200134 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type Type 499 Timer Reset Module Proximity Switch Signal Indicator
Pneumatic Timers, Proximity Switches,Signal Indicators
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
Temperature rangeInputsInpunt controlFrequencyCount Mode
Prescaling factorSet valueReset inputControl inputs
Output
Page
Small, compact,5 different versions
Voltage supply 12-24 VDC
8-digit LCD or 6-digit LED display
Optional with prescaling and decimal point function
48 x 24 x 6045 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 6512-24 VDC
-10-50 °C
PNP/NPN2 kHzPhase discriminator(single)Optional 0.001-99.999
PNP/NPN
298
Position indicator withlarge dual-color, 8-digit LCD display; illuminated
Reproducible, freelyselectable set value
Programmable prescaling and decimal point functions
Voltage supply viaexchangeable Li cell
Small mounting depth Expandable by a
variety of optionalmodules
10 versions of thesame designoffering different functions
72 x 36 x 3668 x 33LCD 8-digit, 12 mmilluminatedIP 65Lithium battery, exchangeable0-50 °C
PNP/NPN10 kHz / 30 HzPhase discriminator(single)Optional 0.001-99.9999ProgrammableNPNKeylock
302
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange
Reproducible, freelyselectable set value
2 preset values Upgradable options:
RS 485, linear output Easy to service due to
modular system Complete functions by
8 counter versions and5 process indicators
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC0-55 °C
PNP/NPN10 kHz / 200 Hz / 20 HzPhase discriminator(single)0.0001-9.9999ProgrammableNPNKeylock
Optional with linear output; 1 or 2 relay and transistor outputs
305
Large 6-digit LED display, digit height14 mm
Voltage supply 12-24 VDC or 115/230 VAC
Plug-in screw terminal connections
Very high countingfrequency up to 40 kHz
Without, or with 2 limit values (as relayand transistor)
Indication of chainvalues or absolutevalues
Optional with RS 232or RS 485 interface
96 x 48 x 10892 x 45LED 6-digit, 14 mm
IP 5412-24 VDC; 24 VAC or100-240 VAC0-50 °C
PNP/NPN40 kHz / 30 HzPhase discriminator(single, dual, quadruple)0.0001-99.999ProgrammablePNP/NPNKeylock; display hold and reset enableWithout, or with 2 relayand transistor outputs
308
35Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Position Indicators
Type tico 731 tico 734 002 tico 735 signo 727
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)DisplayProtectionSupply voltage
Temperature rangeInputsInput controlBaud rateCounting mode
Prescaling factor
Set valueReset inputControl inputs
Output
Page
Large 6-digit LED display;digit height 14 mm
Voltage supply 12-24VDC or 115/230 VAC
SSI (SynchronousSerial Interface) inputfor absolute encoder
Freely scaleable display
Connections via plug-in screw terminals
Chain value or absolute value indication
Without, or with 2 limit values as relayand transistor
96 x 48 x 10892 x 45LED 6-digit, 14 mmIP 5412-24 VDC or115/230 VAC0-50 °C
SSI100 kHzSSI for single-turn and multiturn encoders up to 24 bitResolution programmable per revolutionProgrammablePNP/NPNKeylock and reset/display hold inputWithout, or with 2 relay and transistor outputs
315
Components 200136 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Position Indicators
Type signo 727 SSI
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)ProgrammingProtectionSupply voltage
InputsInput controlFrequency/signal lengthScaling factorReset inputOutput
Accessories
Page
Programmable pulsescaling factor up to2047:1
NAMUR generatorinput
DIN-rail attachment PNP transistor output Can be used as pulse
shaper
22.6 x 68.5 x 48
Via DIP switchesIP 2010-30 VDC
PNP or NAMUR5 kHz / 30 HzUp to 2047:1PNPPNP transistor 0.2 ms - 2 s; djustable depending on version 100 mA
324
Programmable pulsescaling factor up to1000:1
NAMUR generatorinput
Plugs into and combines with modular system 400
Transistor outputPNP/NPN
Pulse frequency up to5 kHz
50 x 25 x 92.5
50 x 25Via jumpersIP 2024 VDC
PNP, optional: NAMUR5 kHz / 50 HzUp to 1000:1PNPPNP/NPN transistor programmable, 25 ms;400 mASocket (connection box),panel frame
326
PNP or NPN input PNP or NPN output For electromechanical
or electronic counters
For use as amplifier orlevel adapter
DIN-rail mounting
22.6 x 68.5 x 48
IP 5010-30 VDC
PNP/NPN1 MHz
PNP/NPN transistor
300 mA
328
100 % Continuous-duty module for elec-trical reset for presetcounters 446, 447,486, 487 and presettime counters 489;with electrical reset
Plugs into modularsystem 400
Integrated connectionbox
51 x 51 x 121 (with plugged-in counter)50 x 50
IP 0024 VDC; 24 VAC; 115 VAC or 230 VAC
Depending on version15 ms (minimum)
Changeover contact;250 msMax. 220 V
330
37Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
Type 651 Pulse Scaler 651 Pulse Scaler 654 Pulse Amplifier Contin.-Duty Module forDIN-rail Modular System Electrical Reset
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)ProtectionSupply voltage
InputsInput controlOutput
Page
Automatic reset forpreset counters446,447,486,487, andpreset time counter489, with electricalreset
Plugs into modularsystem 400
Integrated connection box
51 x 51 x 121 with plugged-in counter50 x 50IP 0024 VDC; 24 VAC; 115 VAC or 230 VAC
Depending on versionChangeover contact,max. 220 V, DC max. 1 per sAC max. 1 per 2 s
331
115 or 230 VAC powersupply
Compatible with elec-tronic preset counters711.4 and 781.4
Integrated connection box
51 x 51 x 121 with plugged-in counter50 x 50IP 00115 VAC or 230 VAC
24 VDC, max. 60 mA
332
Components 200138 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
Type Reset Module Power Supply Unit for Preset Counters for Type 711
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)
Protection class
Page
Integrated panelframe for modularsystem 400
Sizes 1-5 Combines with
components of themodular system
60 x 50 x 47 size 160 x 75 x 47 size 260 x 100 x 71 size 360 x 125 x 71 size 472 x 144 x 71 size 5
54 x 29.5 size 154 x 54 size 255 x 82 size 355 x 106 size 454 x 132 size 5
333
Adapter panel framesfor tico and signo DINcounters
To adapt to differentDIN sizes and cutoutdimensions
60 x 50 to 48 x 2472 x 72 to 48 x 4860 x 75 to 48 x 48125 x 60 to 96 x 4860 x 75 to 2 pieces 48 x 2460 x 100 to 48 x 24 and 48 x 4855 x 29.2 size 168 x 68 DIN54 x 54 size 2106 x 55 size 454 x 54 size 255 x 82 size 3
335
Protective case withscrew-type terminals
Screw or clampmounting
Version with translucent cover isavailable
63 x 38 x 99 for size 163 x 63 x 99 for size 260 x 50 x 85 for size 160 x 75 x 75 for size 2
55 x 29.5 size 155 x 55 size 2
IP 52 with translucent cover
336
Sealing covers formodular system 400
Easy to install Protection class
IP 65/66
For 60 x 50 size 1and 60 x 75 size 2Front panels
IP 65/66
337
tico 007
39Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
Type Panel Frame Adapter Panel Frame Protective Cases Sealing Covers
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Page
For DIN-rail mountingor attachment bymeans of screws
Case made of insulating material
Installation of coun-ters of the modularsystem 400 in protective case size 2
65 x 110 x 136
338
Different, practice-oriented circumferenceversions
Different shaft diameters
Surfaces adapted tothe material measured31.5-38 x 26.5 x 75
Depending on version
339
Different stroke levershapes
Adapted to individualfields of application
Compatible withmechanical strokecounters
Depending on version
342
Components 200140 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
Type Case 680 Measuring Wheels Stroke Levers Further Accessories
FurtherAccessories
41Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Product list
Product Type Page
Numerical Display for PLC 0.731… 186Panel frames 1.405… 333Panel frames ”signo“ + ”tico“ 1.405… 334Pneumatic preset counter 0.497… 281Pneumatic preset time counter 0.497… 286Pneumatic proximity switch 0.490… 292Pneumatic signal indicator 0.499… 293Pneumatic timer 0.499… 288Pneumatic totalizing counter 0.495… 276Position Indicator 0.731… 298Position Indicator 0.734… 302Position Indicator dual colour display 0.735… 305Position indicator for absolute encoder connection signo 727 SSI 0.727… 315Position Indicator with/without limit values 0.727… 308Power supply unit with connection box 1.711… 332Preset Counter / Batch Counter dual colour display 0.735… 137Preset Counter / Batch Counter multifunctional 0.732… 131Preset Counter LCD 0.734… 134Preset Counter with PTB approval 0.723… 150Preset Time Counter 0.734… 229Preset Time Counter dual colour display 0.735… 232Preset Time Counter multifunctional 0.732… 226Programmable control counter signo 724 0.724… 157Programmable shift counter signo S-724 0.724… 165Pulse amplifier for DIN rail attachment 0.654… 328Pulse scaler for DIN rail attachment 0.651… 324Pulse scaler for modular system 400 0.651… 326Revolution, length stroke counter 0.225… 120Sealing flaps/transparent covers 1.405… 337Strain Gauge Indicator dual colour display 0.735… 190Stroke levers 0.600… 342Tachometer / Rate Meter 0.731… 252Tachometer / Rate Meter in 2 Versions dual colour display 0.735… 264Tachometer / Rate Meter in 4 Versions 0.734… 261Tachometer / Rate Meter multifunctional 0.732… 258Temperature Indicator dual colour display 0.735… 190Time Counter 0.731… 202Time Counter 0.891… 215Time Counter LCD 0.734… 212Time Counter multifunctional 0.732… 209Time counters "mini-h", AC version 0.633… 224Time counters "mini-h", DC version 0.633… 221Time counters for DIN rail attachment 0.633… 223Time counters in modular system 400 0.478… 219Totalizer / Differential Counter 0.731… 70Totalizer / Differential Counter LCD 0.734… 80Totalizer / Shift Counter multifunctional 0.732… 77Totalizer dual colour display 0.735… 83Totalizier 727.1 0.727… 86Totalizing counter with magnetic actuation 0.490… 122
Product Type Page
AC Volt/Ampere Indicator dual colour display 0.735… 190Analogue multi-function timer 0.740… 239Automatic reset module for preset counters 1.486… 331Benchtop case 1.680… 338Calculating tachometer signo 722 0.722… 267Continuous duty module 1.486… 330DC Prozess Indicator dual colour display 0.735… 190DC Volt/Ampere Indicator dual colour display 0.735… 190Digital multi-function timer 0.741… 239Dummy caps 1.651… 335Dummy caps 2.651… 335Electromechanical preset counter 3-digit ADD 0.447… 178Electromechanical preset counter 3-digit ADD 0.487… 174Electromechanical preset counter 3-digit ADD 0.887… 176Electromechanical preset counter 5-digit ADD 0.486… 174Electromechanical preset counter 5-digit ADD 0.886… 176Electromechanical preset counter5-digit ADD 0.446… 178Electromechanical preset time counter 0.489… 235Electromechanical preset time counter 0.888… 237Electromechanical totalizing counter 0.864… 97Electromechanical totalizing counter 0.866… 97Electromechanical totalizing counter 0.868… 97Electromechanical totalizing counter "mini-i" 0.634… 99Electromechanical totalizing counter "mini-i" 0.635… 99Electromechanical totalizing counter "mini-i" AC 0.635… 102Electromechanical totalizing counter DIN rail attachment 0.635… 104Electromechanical totalizing counter modular system 0.464… 95Electromechanical totalizing counter modular system 0.465… 95Electromechanical totalizing counter modular system 0.466… 95Electromechanical totalizing counter modular system 0.468… 95Electromechanical totalizing counter Piccolo 0.872… 106Electromechanical totalizing counter Piccolo 0.873… 106Electromechanical totalizing counter Piccolo 0.874… 106Electromechanical totalizing counter Piccolo 0.875… 106Electromechanical totalizing counter Piccolo 0.876… 106Electromechanical totalizing counter Piccolo 0.877… 106Electromechanical totalizing counter surface attachment 0.853… 110Electromechanical totalizing counter, miniature type 0.869… 108Electronic preset counter signo 721 0.721… 140Electronic preset counter, modular system 0.711… 169Electronic repeating counter 0.781… 172Electronic totalizing counter, modular system 0.710… 93Hand tally 0.125… 116Hand tallys 0.344… 112Hand tallys 0.345… 112Hand tallys 0.346… 112LCD Electronic preset counter signo 723.5 0.723… 151LED Electronic preset counter signo 723.1 0.723… 143Measuring wheels 0.601… 339Mechanical length counter 0.150… 117Mechanical length counter 0.205… 118Mechanical preset counter for revolution/length/stroke 0.250… 180Mechanical revolution and stroke counter 0.125… 115Mechanical revolution counter 0.101… 113Mechanical revolution counter 0.103… 113Mechanical stroke counter 0.301… 113Mechanical stroke counter 0.309… 113Mechanical stroke counter 0.312… 119Multi-function timer tico 742 0.742… 243
Components 200142 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type list
Type Product Page
0.731… Numerical Display for PLC 1860.731… Position Indicator 2980.731… Tachometer / Rate Meter 2520.731… Time Counter 2020.731… Totalizer / Differential Counter 700.732… Preset Counter / Batch Counter multifunctional 1310.732… Preset Time Counter multifunctional 2260.732… Tachometer / Rate Meter multifunctional 2580.732… Time Counter multifunctional 2090.732… Totalizer / Shift Counter multifunctional 770.734… Position Indicator 3020.734… Preset Counter LCD 1340.734… Preset Time Counter 2290.734… Tachometer / Rate Meter in 4 Versions 2610.734… Time Counter LCD 2120.734… Totalizer / Differential Counter LCD 800.735… AC Volt/Ampere Indicator dual colour display 1900.735… DC Prozess Indicator dual colour display 1900.735… DC Volt/Ampere Indicator dual colour display 1900.735… Position Indicator dual colour display 3050.735… Preset Counter / Batch Counter dual colour display 1370.735… Preset Time Counter dual colour display 2320.735… Strain Gauge Indicator dual colour display 1900.735… Tachometer / Rate Meter in 2 Versions
dual colour display 2640.735… Temperature Indicator dual colour display 1900.735… Totalizer dual colour display 830.740… Analogue multi-function timer 2390.741… Digital multi-function timer 2390.742… Multi-function timer tico 742 2430.781… Electronic repeating counter 1720.853… Electromechanical totalizing counter
surface attachment 1100.864… Electromechanical totalizing counter 970.866… Electromechanical totalizing counter 970.868… Electromechanical totalizing counter 970.869… Electromechanical totalizing counter, miniature type 1080.872… Electromechanical totalizing counter Piccolo 1060.873… Electromechanical totalizing counter Piccolo 1060.874… Electromechanical totalizing counter Piccolo 1060.875… Electromechanical totalizing counter Piccolo 1060.876… Electromechanical totalizing counter Piccolo 1060.877… Electromechanical totalizing counter Piccolo 1060.886… Electromechanical preset counter 5-digit ADD 1760.887… Electromechanical preset counter 3-digit ADD 1760.888… Electromechanical preset time counter 2370.891… Time Counter 2151.405… Panel frames 3331.405… Panel frames ”signo“ + ”tico“ 3341.405… Sealing flaps/transparent covers 3371.486… Automatic reset module for preset counters 3311.486… Continuous duty module 3301.651… Dummy caps 3351.680… Benchtop case 3381.711… Power supply unit with connection box 3322.651… Dummy caps 335
Type Product Page
0.101… Mechanical revolution counter 1130.103… Mechanical revolution counter 1130.125… Hand tally 1160.125… Mechanical revolution and stroke counter 1150.150… Mechanical length counter 1170.205… Mechanical length counter 1180.225… Revolution, length stroke counter 1200.250… Mechanical preset counter
for revolution/length/stroke 1800.301… Mechanical stroke counter 1130.309… Mechanical stroke counter 1130.312… Mechanical stroke counter 1190.344… Hand tallys 1120.345… Hand tallys 1120.346… Hand tallys 1120.446… Electromechanical preset counter5-digit ADD 1780.447… Electromechanical preset counter 3-digit ADD 1780.464… Electromechanical totalizing counter modular system 950.465… Electromechanical totalizing counter modular system 950.466… Electromechanical totalizing counter modular system 950.468… Electromechanical totalizing counter modular system 950.478… Time counters in modular system 400 2190.486… Electromechanical preset counter 5-digit ADD 1740.487… Electromechanical preset counter 3-digit ADD 1740.489… Electromechanical preset time counter 2350.490… Pneumatic proximity switch 2920.490… Totalizing counter with magnetic actuation 1220.495… Pneumatic totalizing counter 2760.497… Pneumatic preset counter 2810.497… Pneumatic preset time counter 2860.499… Pneumatic signal indicator 2930.499… Pneumatic timer 2880.600… Stroke levers 3420.601… Measuring wheels 3390.633… Time counters "mini-h", AC version 2240.633… Time counters "mini-h", DC version 2210.633… Time counters for DIN rail attachment 2230.634… Electromechanical totalizing counter "mini-i" 990.635… Electromechanical totalizing counter "mini-i" 990.635… Electromechanical totalizing counter "mini-i" AC 1020.635… Electromechanical totalizing counter
DIN rail attachment 1040.651… Pulse scaler for DIN rail attachment 3240.651… Pulse scaler for modular system 400 3260.654… Pulse amplifier for DIN rail attachment 3280.710… Electronic totalizing counter, modular system 930.711… Electronic preset counter, modular system 1690.721… Electronic preset counter signo 721 1400.722… Calculating tachometer signo 722 2670.723… LCD Electronic preset counter signo 723.5 1510.723… LED Electronic preset counter signo 723.1 1430.723… Preset Counter with PTB approval 1500.724… Programmable control counter signo 724 1570.724… Programmable shift counter signo S-724 1650.727… Position indicator for absolute encoder
connection signo 727 SSI 3150.727… Position Indicator with/without limit values 3080.727… Totalizier 727.1 86
43Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Piece/quantity counting by means ofproximity switches, light barriers, reflec-tance light barriers, or switches.
For the detection of unit numbers, e.g.screws, nails, bottles, single packs, or otherproduction units that have to be counted.Detection is possible by electronic or electro-mechanical counters.
Piece and/or stroke counting for pun-ches or presses
Helps determine the downtimes of tools ordetect unit numbers by means of mechanicalstroke counters or non-contact magneticcounters.
Shift-counting of unit numbers or tota-lizing counts of 2 production lines
Piece-counting of production units undershift-operation conditions, or counting oftwo parallel production lines, thereby indica-ting single shift values and the total unitnumber.
Length measuring by means of angularencoders, proximity switches, light barriersor mechanical counters.
For length measuring of cables, foils, fabrics,metals, bands, ropes, paper, etc. The measured length is detected by a measu-ring wheel or directly on the roller/drum andindicated electronically or mechanically.
Examples of the versatile use of Hengstler products.....
Dosing and Filling
Flow meters and a preset counter allow con-trolled and accurate filling or dosing of liquidmedia.
Cutting of cables, threads and yarns bymeans of angular encoders and presetcounters.
Use the preset counter for length control.Counters exhibiting two presets allow selec-ting between fast and slow positioning inorder to achieve accurate length values.
Appl
icat
ions
Components 200144 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Cutting and stacking of foils/films,bands/strips, metals, paper, carton, etc. bymeans of batch counters.
Preset counter for length control – also avai-lable with fast/slow positioning. Control ofpiece numbers via an integrated batchcounter.
Thickness measurement of plates, cables,films, etc. by means of encoders and limit-value counters
A simple mechanical principle convertsmaterial thickness into a rotating movement.A limit-value counter evaluates the thicknessand signals warning messages if values areexceeded or fallen below.
Measuring of assembly and manufactu-ring times or - in the sports sector - thetimes of a race or competition, by means ofa short-duration timer; resolution down tomilliseconds
Timing as accurate as that of quartz timers -pulse width or period length functions for allfields of application. Optional preset func-tions are available for controlling.
Position indication with limit values toprotect lateral stops
Position indication with absolute or incre-mental encoder for convenient workpiecemachining. With digital display.
Speed measurements and monitoring oflength controls of extruders
Angle encoders or initiators enable the detec-tion, control and monitoring of the forwardfeed speed or length of plastic or metal pro-files.
Speed monitoring of machine tools
Detection of the workpiece speed by meansof a tachometer; monitoring of the speed ispossible by means of min. and max. limitvalues.
Extruder
Examples of the versatile use of Hengstler products.....
Connection Examples
45Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Counters
TICO 732with encoderRI 30, 32, 36, 38, 41, 42, 58, 58-H, 58-D, 59, 76-TD
TICO 732with proximity switch or light barrier
TICO 732with contact activation
RI 58, 30, 36,
59, 58-H, 58-D, 76-TD,
32, 38, 41, 42
PVC TPE
red brown/green
black white/green
white brown
green grey
10 -30 VDL
GND
channel1
channel 2
1 Sensor 12-30 VDCor 12-24 V supply voltage
2 OV GNO
3 INPA Function code:F1 of 6 or 7
4 INPB
1 Sensor 12-30 VDCor 12-24 V supply voltage
3 INPA Function code:F1 of 0-5F10 of 1=PNPF10 of 0=NPN
4 OV GND
tico 732
Supply voltage 12-30 VPC
Output PNP or NPN
OV GND
Cabel230 VAC
depending on version
230 VAC
depending on version10
10 11
11
1 Sensor 12-30 VDCor 12-24 V supplyvoltage
3 INPA
4 OV GND
tico 732
230 VAC
depending on version
10 11
All unused wires may be cut off.
The shield can be connected to earth on both sides.
Proximity switch
Light barrier
PNP
NPN
Function code:F1 of 0-5F10 of 1= PNPF10 of 0= NPNF11 of 0 =30 Hz
tico 732
Components 200146 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Counters Connection Examples
SIGNO 723/727/GLZwith encoderRI 30, 32, 36, 38, 41, 42, 58, 58-H, 58-D, 59, 76-TD
SIGNO 727 SSI
TICO 731
RI 58, 30, 36,
59, 58-H, 58-D, 76-TD,
32, 38, 41, 42
RA 58/59 SSI
RA 58-PSSI
PVC TPE
red brown/green
black white/green
white brown
green grey
10 -30 VDL
GND
channel 1
channel 2
32 Sensor 12-24 VDC
31 OV
30 INPA
29 INPB according todemand
Cabele.g. 230 VAC
depending on version
1 2 3 4
e.g. 230 VAC
dependingor version
1 2 3 4
All unused wires may be cut off.
The shield can be connected to earth on both sides.
All unused wires may be cut off.
The shield can be connected to earth on both sides.
Function code:“In” of Ph 1“In” of Ph 2“In” of Ph 4
signo723/727/GLZ
signo 727 SSI
tico 731.1 tico 731.2
white 32 Sensor12-24 VDC
brown 31 OV
DATA pink 30 DATA +
DATA grey 29 DATA -
yellow 28 CLOCK +
green 27 CLOCK -
CLOCK
CLOCK
OV10-30VDC
With contact counting 30 Hz With PNP-pulse counting 7.5 KHz
3 Count
2 OV
4 Reset
1 12-24 VDC
2 OV
3 Count
4 Reset
Count-ing/Start
Reset
Count pulse
Reset
+12-
24VD
C
OV
47Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Connection Examples
TICO 735 A6with Strain Gauge
TICO 735 A1with PT 100 orThermoelement connection
TICO 731.4/5as numericalSPS-indicaton on SPS
90-240 VAC13 14
90-240 VAC13 14
Thermoelement 3 conductor 4 conductorPT 100 PT 100
tico 735 A6
tico 735 A1
SPS tico 731.4/5
+ sense 4 supply sense +
+ excitation 6 supply +
+ output 2 signal +
- output 1 signal -
- excitation 5 supply -
- sense 3 supply sense -
1 1
2 2
+3 3 3
-4 4 4
+24 VDC
24 VDC OV OV +24 VDCOV
(if necessary fromfront button 731)
+
+
Ax CLOCK 4 CLOCK
Ay DATA 7 DATA
E OUT OUT 1
Indicator
Interface
Components 200148 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Connection Examples
SIGNO 723/727with RS 485 on RTC-Converterwith RS 232 on PC
SIGNO 723/727with RS 232 on PC
SIGNO 727on PRIMO-Printer
240 VAC
1 2 3 4
230 VAC
1 2 3 4
signo 723/727
signo 723/727
signo 724
PC RS 232
PC RS 232
Primo Printer RS 232
RTC RS 485
RxD 2 3 TxDA 1 18 A
TxD 3 2 RxD
RTS 7 7 RTS B 2 17 B
CTS 8 8 CTS5 19 DV
DTR 4 4 DTR
DSR 6 6 DSR
GND 5 5 GND
TxD 3 17 RxD
RxD 2 18 TxD
GND 5 19 GND
RTS 7
CTS 8
RxD 2 2 grey 45 TxD
TxD 3 3 red 46 RxD
GND 5 5 white/green 40 GND
47 RTS
48 CTS
depending on version
depending on version
100-240 VAC1 2
depending on versionCabel E 1 522 437
Counters with Interface
49Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Choosing the counters to fit the application
RS 232(max. 15 m)
EXAMPLE 1:One counter connects to PC ormodem
EXAMPLE 2:Up to 31 counters connect to anRTC or PLC via RS 485.RTC connects to PC or modem
RS 485(max. 2 km) RS 232
(max. 15 m)
1. COMMUNICATIONWITH PC OR IPC
Type Interface Protocol Function
signo 723.1 RS 485 / RS 232 Hengstler TP3 read and writesigno 727.1 RS 485 / RS 232 Hengstler TP3 read and writesigno 723.1 RS 232 ASCII printer protocol readsigno 724 RS 232 ASCII printer protocol readtico 735 RS 485 ASCII protocol read and writem)
2. COMMUNICATION WITH PLC
Type Interface Protocol Function
signo 724 RS 485 Profibus FMS-DP/Suconet read and writesigno 723.1 RS 232 ASCII printer protocol readsigno 724 RS 232 ASCII printer protocol readtico 731 24V BCD or graphics serial writetico 735 RS 485 ASCII protocol read and write
3. CONNECTING TO PRINTERS
Type Interface Protocol Function
signo 723.1 RS 232 ASCII printer protocol send to printersigno 724 RS 232 ASCII printer protocol send to printer
PTB-approved Length Measurement Systems
Components 200150 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
The components represented in the overview were approved resp. prechecked by thePhysikalisch-Technische Bundesanstalt (PTB, German Federal Institute for Physics andTechnology) for use with length measuring equipment appropriate for verification.
PTB-approved systems are installed wherever gaugeing of a length measuringmachine/assembly is statutory.
Machines for making up endless materials such as: Textiles (carpets, fabrics) Foils (plastics, metals) Wire, cables
For measuring belt systems versions with programmable prescaler available
SYSTEM OVERVIEW
APPLICATIONS
EXAMPLE
NEW
867863
267103
467803186786
3267103
723.181
723.180
Measuring wheelCircumference 20 cm
Measuring wheelCircumference 50 cm
Shaft encoderType RI 58-O
CounterType signo GLZOrdering code 0 723 181with printer interface
Countersigno GLZOrdering code 0 723 180without printer interface
Type signo 723.5Ordering code 0 723 580
PrinterType Primo
PTB-approved Length Measurement Systems
51Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
SHORT DESCRIPTION OFTECHNICAL COMPONENTS
Counters
Encoders
signo GLZ (-P) signo 723.5 (-P)
Display LED, 6-digit LCD, 6-digit1 line, digit height 14 mm 2 lines, digit height 13 resp.
7 mmFunction 2 presets 2 presets for length counter
and 1 preset for batch counterResolution unit mm, dm, cm unit cm
programmableOutputs 2 changeover relays 2 make contact relays
for length counter;3 transistor outputsfor length/batch counter
Encoder supply 24 VDC 24 VDCDimensions DIN dim. 48 x 96 mm DIN dim. 72 x 72 mmSupply 115/230 VAC 100…240 VAC Interface opt. RS 232 for printer –Ordering code (standard) 0723180 without interface 0723580
0723181 with interfaceOrdering code for 0723182 without interfacecounter with prescaler 0723183 with interface
For further details please refer to heading “Preset counters” in this catalogue.
Approval for type RI 58-0; for version see diagram „Ordering data” Outputs short circuit proof Supply voltage with pole protection Encoder monitoring (disk contamination, disk breakage, overheat, undervoltage,
excessive LED aging) Activation of alarm output on error
ORDERING DATA
For further details please see our Encoder Catalogue section “RI 58-0”.
NEW
PTB-approved Length Measurement Systems
Components 200152 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
MEASURING WHEELS Ordering Circum- Profile Width Surface Application Shaft-code ference
0601017 200 mm No. 1 4.0 mm crosshatched threads, yarns 7 mmknurl with rim,aluminium
0601093 200 mm No. 4 20.5 mm parallel knurl, rubber, soft 7 mmaluminium plastics
0601094 200 mm No. 5 16.5 mm parallel knurl threads, yarns, 7 mmwith rim, bandsaluminium
0601121 500 mm No. 4 25.0 mm parallel knurl, rubber, soft 7 mmaluminium plastics
0601063 500 mm No. 6 25.0 mm plastic surface wire, 7 mmVulkolan steel sections
0601163 500 mm No. 6 25.0 mm plastic surface wire, 10 mmVulkolan steel sections
For further details please see „Accessories”
PRIMO-THERMAL PRINTERS 2 possible versions desktop, wall-mounted Paper width 114 mm Characters per line 80 Resolution 6 dots/mm Speed 1,052 characters/s Barcode printing possible Label printing with mark recognition IBM/EPSON compatible
ORDERING DATADesktop/wall-mounted printer
T = desktop unitW = wall-mounted unit
1 = 230 V AC2 = 115 V AC3 = 10.8…30 VDC
C = Centronics + barcode+ variable font sizes + mark recognition
1 = 80 characters
1 = cutter2 = cutter for heavler gauge3 = cutter with perforation4 = tear-off edge with paper guide
A = for paper roll 30 mB = for paper roll 90 mC = external paper roll(without hood, roll diameter max. 180 mm)
1 = Rs 2322 = RS 232 with 2 power
outputs
0 = noneK = with cable covering
0 = noneS = special version
467803186786
3267103
PTB-approved Length Measurement Systems
53Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
CONNECTION DIAGRAM
FOR YOUR ORDER Counter Encoder Printer Measuring wheel
Here you can collect the ordering codes of your chosen versions for your order.
PrinterCounterShaft encoder
Track A
Track B
Length Measurement Systems
Components 200154 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
SYSTEM OVERVIEW
These systems are used where length measurement is the main component or a part of the manufacturing process. Length measurement of tile materials such as stone tiles, wood etc. Length measurement of band materials such as fabrics (carpets, foil, paper) Length measurement of cable, wire, thread etc.
APPLICATIONS
EXAMPLE
SHORT DESCRIPTION OF TECHNICAL COMPONENTS
Counters
signo 723.1 signo 723.5 signo 724
Display LED, 6-digit LCD, 6-digit LED, 7-digit1 line, digit 2 lines, digit 2 lines, digitheight 14 mm height 13 resp. 7 mm height 13 resp. 7 mm
Function 2 presets 2 presets for 2 presets forlength counter; length counter; trailingbatch counter preset, 1 batch counterwith preset with preset
Resolution at user’s choice; at user’s choice; at user’s choice;e.g. (unit mm, dm, e.g. (unit mm, dm, e.g. (unit mm, dm,cm etc.) cm etc.) cm etc.)
Outputs 2 changeover relays 2 make contact relays 3 relays und transistor2 transistor ouputs for length counter; outputs for length
3 transistor outputs counter and trailing pre-for length/batch set; 1 transistor outputcounter for batch counter
Dimensions DIN 48 x 96 mm DIN 72 x 72 mm DIN 44 x 72 mmSupply 115/230 VAC or 100–240 VAC or 100–240 VAC or
12–24 VDC 12–24 VDC 12–24 VDCInterface RS 232 for printer/ RS 485 for RS 232 for option panel display or Profibus or printer; RS 485 for
communication with PC. Suconet Profibus or SuconetRS 485 for communi-cation with PC
467803186786
3267103
4678031867863 267103
signo 723.1
Measuring wheel
Printer or Panel display or PC
Printer
RS 232
RS 485
RS 232
Profibus/Suconet
Profibus/Suconet
RI 58
signo 723.5
signo 724
RS 485
Length Measurement Systems
55Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Encoders Outputs short circuit proof Supply voltage with pole protection Encoder monitoring (disk contamination, disk breakage, overheat, undervoltage,
excessive LED aging) Activation of alarm output on error
PRIMO Thermal printers 4 possible versions: desktop , wall-mounted, built-in,19“ module (3HE)
Paper width: 60 mm resp. 114 mm Characters per line: 40 resp. 80 Resolution: 6 dots/mm Speed: 526 characters/s resp. 1,052 characters/s Label printing with mark recognition IBM/EPSON compatible
The choice of the suitable encoder type depends on the respective application: thusthe whole range of encoders of the type RI is at your disposalThe only prerequisites for connection to the signo series counters are: Supply voltage: 10 … 30 V (E) Output: push-pull short circuit proof (K)
Ordering data when applied with measuring wheel
Ordering data when coupled withshaft/motor etc.
* the required number of pulses depends on the measuring wheel’s circumference andon your desired resolution
For further details please refer to our Encoder catalogue section “RI 58-0”
signo 723.1 signo 723.5 signo 724
Ordering code 12–24 VDC 0723101 0723501 0724001 w/o interface 115–230 VAC 0723102 0723502 0724002 Ordering codewith RS 232- 12–24 VDC 0723150 M3 – 0724050 MXinterface 115–230 VAC 0723151 M3 – 0724051 MXOrdering code Hengstler: Suconet: Profibus:with RS 485- 12–24 VDC 0723160 M3 0723591 0724093 interface 115–230 VAC 0723161 M3 0723592 0724094
For further details please refer to our Counter program, heading „Preset counters”.
For the 724 signo type a large number of printing masks has already been developed.Please see „Preset counter / signo 724“.
Counters
Length Measurement Systems
Components 200156 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
ORDERING DATADesktop/wall-mounted printer
Built in printer/19“ module
T = desktop unitW = wall-mounted unit
1 = 230 V AC2 = 115 V AC3 = 10.8…30 VDC
C = Centronics + barcode+ variable font sizes + mark recognition
1 = 80 characters
1 = cutter2 = cutter for heavier gauge3 = cutter with perforation4 = tear-off edge with paper guide
A = for paper roll 30 mB = for paper roll 90 mC = external paper roll(without hood, roll diameter max. 180 mm)
1 = Rs 2322 = RS 232 with 2 power
outputs
0 = noneK = with cable covering
0 = noneS = special version
E = ModularM = 19’’ module
4 = 24 VDC
C = Centronics + barcode+ variable font sizes + mark recognition
1 = 80 characters2 = 40 characters
4 = stub edgeD = paper roll,max. diameter 50 mm
1 = RS 2322 = RS 232 with
2 power outputs
0 = noneS = special version
0 = none1 = DC cable 16880632 = Centronics adapter3 = 1 + 2
Measuring wheels Circumference 20 cm and 50 cm (also yard) 6 profile types and surfaces for various applications For details see „Accessories”
Panel display (on request)
Length Measurement Systems
57Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Communication with PC or connection to bus net
(on request)
CONNECTION DIAGRAM
For your order Counter Encoder Printer Measuring wheel
Here you can collect the ordering codes of your chosen versions for your order.
4678031867863 267103
Shaft encoder
Track A
Track B
Printer
Panel display
Counter
Frequency Measuring and Speed Monitoring Systems
Components 200158 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Frequency measuring and speedmonitoring with/without limitvalues
Speed monitoring for continuous manufacturing processes Delivery rate of a bottling plant (number of bottles per hour) Speed monitoring for a conveyor belt within given limits Flow measurement per period on conveyor equipment for solids and liquids
APPLICATION
+
SHORT DESCRIPTION OF TECHNICAL COMPONENTS
Counters
Initiator z. B.Näherungsschalter
tico 732 with/withoutlimit values
tico 732 signo 722.1 signo 722.2
Display LED or LCD, 6-digit, LED, 5-digit, LED, 5-digit,1 line, digit 1 line, digit 1 line, digitheight 7 mm height 14 mm height 14 mm
Frequencyrange 1/min ……… 5000/s 1/min ……… 10000/s 1/min ……… 10000/sFunctions prescaler and prescaler and prescaler and
scaler with or scaler scalerwithout 2 limit 2 limit values, display retention andvalues display retention and keylock
keylockOutputs encoder supply 2 changeover relays, encoder supply
encoder supplyDimensions DIN 48 x 48 mm DIN 96 x 48 mm DIN 96 x 48 mmSupply 12-24 VDC or 12-24 VDC or 12-24 VDC or
115 or 230 VAC 100-240 VAC 100-240 VACOrdering code (DC-supply) 0732030 0722101 0722201Ordering code 115 VAC 0732067(AC-supply) 230 VAC 0732031 0722102 0722202
For further details please refer to heading „Tachometers“ or in this catalogue.
Initiator, e.g.proximity switch
E.g. conveyor belt
Motor/shaft/spindle Incrementalshaft encoder
signo 722.2 without limit valuessigno 722.1 with limit values
Frequency Measuring and Speed Monitoring Systems
59Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
You can choose from the whole range of our RI shaft encoder types.The only prerequisites for connection to the signo series counters are: Supply voltage: 10 … 30 VDC Output: push-pull short circuit proof
Further criteria for choosing an encoder are: Required number of pulses Dimensions Environmental conditions (temperature, IP-Protection class)
For further details please refer to our Encoder Catalogue.
Encoders
For your order Tachometer Encoder
Here you can collect the ordering codes of your chosen versions for your order.
467803186786
3267103
4678031867863 267103
Batch Counting Systems with/without Interface
Components 200160 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
SYSTEM OVERVIEW
Batch counting for continuous and discontinuous manufacturing processes, such as: Packaging machines Bottling plants Forming plants for metals and plastics (pressworking, presses, diecasting)
APPLICATION
SHORT DESCRIPTION OFTECHNICAL COMPONENTS
Counters
RS 485
Printer
RS 485
RS 485
signo 721 signo 723.1 signo 723.5 signo 724
Display LED, 5-digit, LED, 6-digit, LCD, 6-digit, LED, 7-digit1 line, digit 1 line, digit 2 lines, digit 2 lines, digitheight 7 mm height 14 mm height 13 resp. height 13 resp.
7 mm 7 mmFunction as totalizing 2 presets 2 presets and 2 presets,1 pre-
counter; as preset 1 lot counter liminary contact andcounter with 1 or with preset 1 batch counter w/2 presets preset
Count mode adding, adding, adding, adding,subtracting subtracting, subtracting, subtracting,
differential differential differentialOutputs 1 changeover relay 2 changeover relays 2 make contact 3 relays and
or 2 make contact 2 transistor relays and 3 trans- 4 transistorrelays outputs istor outputs outputs
Dimensions DIN 48 x 48 DIN 48 x 96 DIN 72 x 72 DIN 144 x 72Supply 100-240 VAC 115/230 VAC 100-240 VAC 100-240 VAC
or 12-24 VDC or 12-24 VDC or 12-24 VDC or 12-24 VDCInterface none RS 232 for RS 485 for RS 232 foroption printer/panel dis- Profibus or printer;
play or commu- Suconet RS 485 for Profi-nication with PC bus or SuconetRS 485
For further details please refer to heading „Preset Counters“ in this catalogue.
E.g. conveyor belt
Printer or Large Panel display or PC
RS 485
signo 723.1
Initiator,e.g. proximityswitch
467803867863 26710
Initiator z. B.Näherungsschalter
Batch Counting Systems with/without Interface
61Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 721 signo 723.1 signo 723.5 signo 724
Ordering code 12–24 VDC s. catalogue 0723101 0723501 0724000w/o interface 115 / 230 VAC s. catalogue 0723102 0723502 0724002Ordering code 12–24 VDC – 0723150M3 – 0724050MXwith RS 232 115 / 230 VAC – 0723151M3 – 0724051MXinterfaceProtocol Hengstler: Suconet: Profibus:Ordering code 12–24 VDC – 0723160M3 0723591 0724093with RS 485 115 / 230 VAC – 0723161M3 0723592 0724094 interface
For further details please refer to headings “Totalizing counters” and “Preset counters” in this catalogue.
ORDERING DATA
Counters
Printer
CONNECTION DIAGRAM
Detailed information about possible output devices, such as PRIMO Thermal printer Large Panel display Communication with PC (3964 R-Siemens protocol) or connection to bus net
you will find under the description of “resp. under the counter description LengthMeasurement Systems”
OUTPUT DEVICES
For your orderCounter Printer
Here you can collect the ordering codes of your chosen versions for your order.
Initiator,e.g. proximity switch
Panel display
Counter
Modular System 400
Components 200162 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
MODULAR SYSTEM 400 All counters in the Hengstler modular system 400 are of the plug-in type and havefront panel dimensions based on 25 x 50 mm. They can be arranged in any combi-nation as far as functionally feasible. Each counter requires a connection box forelectrical connections and usually also a panel frame for mounting.
COUNTERwith connection box and panel frame
MOUNTING the connection box by means of aflat steel bar
The counters are installed by means ofthe connection box or by a connectionbox and panel frame. For more complexarrangements, any number of connec-tion boxes may be assembled to form acompact unit without open spaces bet-ween the boxes.
EXAMPLECounter combination in panel framesize 5
Also, several counters can be combinedtogether with their correspondingconnection boxes to form a unit in onepanel frame. Five panel frame sizes areavailable for this purpose (see accesso-ries).
Totalizing Counters
63Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Tota
lizin
gCo
unte
rs
Typical applications:
Totalizing Quantity counting Production counting Staff recording Stroke counting Rev. counting Length measuring Flow rate recording Usage calculation
Order and daily productionvalue recording
Event counting Machine life and maintenance
counting aboratory and sample counting
Shift counting Totalising 2 product lines Job data collection via
interfaces
Totalizing counters are generally used to register the number of eventsand to present the result in digital form. Our broad spectrum of tota-lizing counters incorporates - as do all Hengstler products - state-of-the-art technology, attractive design, outstanding quality and reliabi-lity.
Components 200164 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput control
Frequency
PrescalerReset input
Control inputs
Counting modeAdd modeDifference modeCounting directionAdd/Add ModePhase DiscriminatorOutput
Page
Small, compact,5 different versions
Voltage supply via lithium cell or 12-24 VDC
8-digit LCD or 6-digit LED display
Programmable counting frequencyand active edge
High-voltage version for 12-250 VDC/AC input pulses
Optional with prescaling function;decimal point andoutput signal
48 x 24 x 32 short48 x 24 x 60 long45 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 65Li battery, type 1+3,12-24 VDC
PNP/NPN, type 3 with 12-250 VDC/AC7.5 kHz / 30 Hz, type 3; 20 HzOptional, 0.001-99.999NPN type 1+2, type 3 with12-250 VDC/ACNPN/PNP Type 4-5Optional: 2nd counterinput, keyboard lock orgate input
StandardOptional type 5
Optional Type 4+5Optional as transistorPNP or display
70
Multifunctional, usedas counter, tacho-meter, time counter,shift or batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Offering a large varietyof programmable functions
Without or with 1 or 2 presets
Freely adjustable prescaling
Programmable keyboard lock
Integrated totalizingcounter
48 x 48 x 93.5
45 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPN
5 kHz / 30 Hz
0.001-999.999PNP/NPN
2nd counter input andgate input
ProgrammableProgrammableProgrammableProgrammableProgrammableWithout, or with 1 or 2 relaysand transistor outputs77
Totalizing counterwith large, 8-digitLCD display; illuminated
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 36
68 x 33LCD 8-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPN
10 kHz / 30 Hz
Optional 0.0001-99.9999NPN
Keyboard lock
StandardOptional
OptionalOption as SSR output
80
Large dual-colour, 5-digit LED display;digit height 18.5 mm
Programmable displaycolour
Upgrading options(e.g. RS 485)
Service-friendly dueto plug-in system
Complete functions by8 counter versions and5 process indicators
96 x 48 x 100
92 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC
PNP/NPN
10 kHz / 200 Hz / 20 Hz
0.0001-9.9999NPN
2nd counter input andkeyboard lock
ProgrammableProgrammableProgrammableProgrammableOptional with 1 or 2 relaysand transistor outputs83
Type tico 731 tico 732 tico 734 tico 735P1
65Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)DisplayProtectionSupply voltage
InputsInput controlFrequencyPrescalerReset input
Control inputs
Counting modeAdd ModeDifference modeCounting directionAdd/Add ModePhase Discriminator
Output
Page
Large 6-digit LED display
Voltage supply 12-24 VDC or 115/230 VAC
Connections via plug-in screw terminals
Very high countingfrequency up to 40 kHz
With or without 2limit values, for use asrelay and transistor
Options: RS 232 or RS 485
96 x 48 x 10892 x 45LED 6-digit, 14 mmIP 5412-24 VDC; 115/230 VAC
PNP/NPN40 kHz / 30 Hz0.0000-99.9999PNP/NPN
Gate input, reset enableand keylock input
ProgrammableProgrammable
1-,2-,4-fold programmingVersion with 2 limit values; for use as relay or transistor
86
Totalizing counter,plugs into modularsystem 400
Voltage supply 12-24 VDC
6-digit LED display Versions with gate
input, display memoryor direction input
With or without frontreset key
Accessories: panelframe and connectionbox
50 x 25 x 8850 x 25LED 6-digit, 7 mmIP 5412-24 VDC
PNP or NPN5 kHz / 30 Hz
PNP, NPN, depending on versionGate input, display hold, counting direction, depending on version
Standard
Depending on version
93
Type signo 727 Type 710
Components 200166 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digits/Digit heightProtectionPulse voltage
Power consumption
Reset
Operating temperature
Duty cycleAccessories
Dimensions (mm)(including panel frame)Cutout (mm)(including panel frame)
Page
4-, 6- or 8-digit display
With manual/electri-cal reset or withoutreset
Plugs into modularsystem 400
Convenient for service
50 x 25 x 75.5
50 x 254-8 depending on version/4 mmIP 4024 VDC; 24 VAC; 115 VAC; 230 VACDC 2.5 W, AC 2.75 VA
Without reset, with manual or electrical reset, depending on version- 10…50 °C
100 % at 25 °CPanel frameconnection box60 x 50 x 88
55 x 29.5
95
4-, 6- or 8-digit display
With manual/electri-cal reset or withoutreset
Plugs into modularsystem 400
Convenient for service
56 x 40 x 72.555 x 28 x 72.552 x 276; 8 depending on version/4 mmIP 4024 VDC; 24 VAC; 115 VAC; 230 VACDC 2.5 W, AC 2.75 VA
Without reset or withmanual reset, dependingon version
- 10…50 °C
100 % at 25 °C
97
Small mountingdimensions
Low power consumption
Standard connections Suitable for PCB
mounting Machine-solderable
and washable
25.2 x 31 x 14.630 x 20 x 4027 x 14.2 only .86, optional 7/4 mm (visual)IP 655; 12; 24 VDC
50-440 mW depending on version
- 10…50 °C; optional - 40…+ 85 °C100 % at 25 °C
99
Small AC voltagecounter
Low power consumption
Easy to install Protection IP 66
30 x 20 x 58.3
27 x 14.46/4 mm (visual)IP 6624; 115; 230 VAC
85-600 mW
-10…50 °C
100 % at 25 °C
102
Type Type 464-468 Type 864-868 Type 634 / 635 Type 635 iw
67Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digits/Digit heightProtectionPulse voltage
Power consumptionReset
Operating temperatureDuty cycleAccessories
Page
For DIN rail mounting Wide voltage range Screw-type terminals Without reset
function
25.5 x 68.5 x 28
6/4 mmIP 105/12/24 VDC;115/230 VAC
80 - 665 mW
- 10…50 °C100 % at 25 °C
104
Small mountingdimensions
4-,5-,6- or 7-digitdisplay
Connections withAMP plug
For surface mountingor base mounting
With or without resetfunction
31.5- 38 x 26.5 x 75
32 - 38.5 x 274; 5; 6; 7 depending on version 4 mmIP 4012; 24 VDC; 24; 110230 VACDC 1.5 W, AC 2.5 VAWithout reset or withmanual reset, dependingon version- 10…50 °C100 % at 25 °CMounting base
106
Small mountingdimensions
6- or 7-digit display Protection IP 54 For base mounting,
surface mounting orflush mounting
46 x 46 x 55 with front panel; 40 x 24.5 x 5540.5 x 256 or 7, depending onversion 4 mmIP 4024 VDC
1.7 W
- 10…50 °C100 % at 25°Mounting base
108
Surface mounting Easy to install Pushbutton reset
53 x 100 x 26
6/4 mmIP 1024 VDC; 230 VAC
DC 2.75 W, AC 4 VAManual
- 10…50 °C100 % at 25 °C
110
Type Type 635 DIN Type 872-877 Type 869 Type 853
Components 200168 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Mechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)No. of digitsDigit heightProtectionReset functionDrive
Torque/Actuating distanceMax. speedMax. strokeTransmission ratioMounting
Accessories
Page
4-digit hand tally Mounting by means of
thumb ring; for wallor bench-mounting
Reset via rotary knob Rugged and simple Maintenance-free
operation
60 x 60 x 26
44 mm
Manual, via rotary knobHand button
1:1Suitable for manualmounting,wall or bench mounting
112
Small mechanicalrevolution and strokecounter
4- or 5-digit display For flush- or surface
mounting With or without case Without reset
function
34.8 x 32 x 20
4 or 5 4.2 mm
Shaft, right or left
0.05 Ncm, stroke counter1.0 Ncm1000/100 r.p.m.500 strokes/min1:1 / 1:10Flush-mounting case,surface-mounting case
Stroke lever
113
4-digit hand tally,revolution and strokecounter
With key reset func-tion
Small dimensions
54 x 45 x 43.5 hand tally,53 x 28.4 x 3544 mmIP 50Manual, via reset keyShaft, right or left
1500/500 r.p.m.500 strokes/min1:1 / 1 :10Baseplate
Stroke lever, measuring wheels
115
6-digit revolution,length and strokecounter
Length counter PTB-approved
With key reset function
80 x 45 x 43.5
6 4 mmIP 50Manual, via reset keyBoth sides; stroke counter right or left0.2 Ncm, stroke counter5 Ncm3000/1500 r.p.m.500 strokes/min1:1 / 1:2 / 1: 10Baseplate
Stroke lever, measuring wheels
117
Type Type 344-346 Type 101/103/301/309 Type 125 Type 150
69Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Mechanical Totalizing Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)No. of digitsDigit heightProtectionResetDrive
Torque/Actuating distance
Max. speedMax. strokeTransmission ratioMounting
Accessories
Page
Length counter withkey reset
7-digit display Large digits, 8 mm
92 x 80 x 4878 mmIP 53Key resetBoth sides
0.5 Ncm
3000 digits/min
1:2 / 1:5 / 1: 10Baseplate
Measuring wheels
118
Stroke counter withkey reset
7-digit display Large digits, 8 mm
92 x 80 x 4878 mmIP 53Key resetBoth sides
8.6 Ncm
500 strokes/min1:1Baseplate
Stroke lever
119
6-digit revolution,length and strokecounter
Length counter PTB-approved
With key reset Large digits, 6.5 mm
132 x 70 x 74.266.5 mm
Manual, via reset keyBoth sides, front, rear,bottom1.2 Ncm, stroke counter8 Ncm
10.000 digits/min800 strokes/min1:1 / 1:5 / 1: 50Baseplate
Stroke lever, measuringwheels
120
Non-contact counterwith magnetic drive
Small mountingdimensions
Protection IP 66 Maintenance-free
operation Easy to mount
27 x 25 x 20.264 mm, visual digit heightIP 66
Via Fe, N- or S-pole magnetsFe = 0.5 mm; N+ S polemagnets depending on strength
ZOB = Without plateZBO = Top plateZBH = Rear plateZBL = Left plateMounting plates,Hose clampsMagnets
122
Type Type 205 Type 312 Type 225 Colibri
Components 200170 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
high contrast 8-digit LCD display or brilliant 6-digit LED display different supply voltages available:
– independent of mains supply with lithium battery or – maintenance-free and environmentally friendly with 12-24 VDC supply
also high-voltage input 12-250 VAC/VDC up to 8 different functions for each standard model:
01 Pulse counter02 Tachometer (1/min)03 Time counter (display in hhhh:mm:ss)04 Time counter (display in hhhhhh,hh)05 Numerical display for the PLC (serial)06 Bidirectional position indicator07 Counter with differential mode08 Maintenance counter (on request)
OVERVIEW
Flexible Counter Seriesin DIN size 24 x 48 mm
Standard Models Type 1 Type 2 Type 3 Type 4 Type 5
HardwareDisplay 8-digit LCD 8-digit LCD 8-digit LCD 8-digit LCD 6-digit LEDSupply voltage Lithium battery 12 – 24 VDC Lithium battery 12 – 24 VDC 12 – 24 VDCNominal data 7 years NV-FRAM 7 years NV-Fram NV-Framretention > 10 years > 10 years > 10 yearsActive edge x x x x xnegative or positiveedge programmableAmplitude thresholds < 0.7 and < 0.7 and < 3 V and < 0.7 and < 0.7 and
> 5 V, max. 30 V DC > 5 V, max. 30 V DC > 12 V > 5 V, max. 30 V DC > 5 V, max. 30 V DCmax. 250 V DC/AC
Counting frequency max. 7.5 kHz or max. 7.5 kHz or 20 Hz max. 7.5 kHz or max. 7.5 kHz orprogrammable 30 Hz attenuated 30 Hz attenuated 30 Hz attenuated 30 Hz attenuatedControl inputs Reset and Keylock Reset Reset and Keylock Reset and Reset and
application input application inputKeylock external input programmable external input programmable programmableMounting depth 32 mm 32 mm 60 mm 60 mm 60 mm
SoftwareImpulse counter x x x x xTachometer 1/min x x x xTime counter h : 1/100 h x x x x xTime counter h : min : s x x x x xNumerical display for PLC x x xPosition indicator x xbi directionalCounter with differential mode xMaintenance counter (on request) x
tico 731
71Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 731
LCD display Lithium battery COUNT: programmable count input
for voltage signal or contact, frequency 7.5 kHz or 30 Hz
RESET: reset input with contact(negative, 30 Hz)
KEYLOCK: locking of the reset key short case
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 8-digit LCD, 7 mmSupply voltage Ub internal lithium batteryNominal data retention lithium battery: 7 years
Inputs:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts)
Control inputs:Reset - manual reset via keyboard (can be locked)
- external reset with static behaviour, active edge negativeattenuated 30 Hz
Reset lock via Keylock input, bridged to 0 VCounting frequency max. 7.5 kHz
ORDER NUMBER
0 731 1 0 1
TYPE 1
DIMENSIONSCONNECTION DIAGRAM
Terminal assignment:
Dimensions in mm
Clamping frame
Connecting terminal
tico 731
Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)
Model tico 731
S* Option: with plug-in
screw terminals*
Components 200172 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 731 Technical data
TYPE 2
LCD display DC supply voltage 12 – 24 V DC COUNT: programmable count input
for voltage signal or contact, frequency 7.5 kHz or 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMmounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 8-digit LCD, 7 mmSupply voltage Ub 12 ... 24 V DCCurrent consumption DC 12 ... 24 V DC < 5 mANominal data retention nonvolatile memory > 10 years
Inputs:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts)
Control inputs:Reset - manual reset via keyboard (can be locked)
- external reset with static behaviour, active edge negativeattenuated 30 Hz
Reset lock programmable via front keyCounting frequency max. 7.5 kHz, transmission rate for numerical display: 100 Hz
ORDER NUMBER
RESET: reset input with contact(negative, 30 Hz)
short case
0 731 2 0 1
DIMENSIONSCONNECTION DIAGRAM
DATACLOCK
Terminal assignment:
Dimensions in mm
tico 731
Clamping frame
Connecting terminal
Model tico 731
Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PC
S* Option: with plug-in
screw terminals*
73Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 731
LCD display Lithium battery COUNT: count input for voltage
pulses 12-250 V AC/DC (20 Hz)
RESET: reset input for voltage pulses 12-250 V AC/DC (20 Hz)
KEYLOCK: locking of the reset key long case
TECHNICAL DATA Operating temperature -10 ... 50 °CStorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 25 ms (20 Hz)Display 8-digit LCD, 7 mmSupply voltage Ub internal lithium batteryCurrent consumption DC lithium battery: 7 years
Inputs:Amplitude thresholds high voltage input 20 Hz:
< 3 V and > 12 V, max. 250 V DC/ACActive edge voltage input positive edgeCounting frequency 20 Hz
Control inputs:Reset - manual reset via keyboard (can be locked)
- external reset with static behaviour, positive circuit
Reset lock by means of bridge on the keylock input
ORDER NUMBER
TYPE 3
DIMENSIONSCONNECTION DIAGRAM
0 731 3 0 1
Terminal assignment:
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
Model tico 731
Software function01 impulse counter 03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)
Components 200174 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 731 Technical data
TYPE 4 LCD display 12-24 V DC supply voltage COUNT: programmable count input
for voltage signal or contact, frequency 7.5 kHz or 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 8-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 years
Count input:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts)
with position indicator 2 kHz: active edge positive
Control inputs:Reset – manual reset via keyboard (can be locked)
– external reset with static behaviour, 30 Hz attenuatedsame edge as with count input
Input 2: gate or second count channel; same edge as with count inputReset lock programmable via front keyTransistor output signal PNP outputVoltage/switching current voltage supply minus 2 V; max. 10 mACounting frequency max. 7.5 kHz, transmission rate for numerical display: 1 kHz
INPUT 2: control input for tempor-ary locking of count input (gate) orsecond count input with positionindicator
RESET: reset input OUT: transistor output for preset
signal long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
0 731 4 0 1
Model tico 731
Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mmClamping frame
Connecting terminal
75Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 731
TYPE 5 LED display 12-24 V DC supply voltage COUNT: programmable count input
for voltage signal or contact, frequency 7.5 kHz or 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7,5 kHz)Display 6-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 years
Count input:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts)
with position indicator 2 kHz
Control inputs:Reset – manual reset via keyboard (can be locked)
– external reset with static behaviour, same edge as count inputInput 2: gate or second count channelReset lock programmable via front keyTransistor output signal PNP outputVoltage/switching current supply minus 2 V; max. 10 mACounting frequency max. 7.5 kHz, transmission rate for numerical display: 1 kHz
INPUT 2: control input for tempor-ary locking of count input (gate) orsecond count input with positionindicator
RESET: reset input OUT: transistor output for preset
signal long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
0 731 5 0 1
0 731 5 0 7
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
Model tico 731
Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator07 counter with differential mode (1 kHz)
Components 200176 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 731 Special functions
SPECIAL FUNCTIONS
ORDER NUMBERSSPECIAL VERSIONS
ORDER NUMBERSSPECIAL VERSIONS
To best match your application, you can order special functions such as prescalervalue, decimal point and preset value, which are permanently set by us before deli-very. With the variable prescaler value you can adapt to already existing transferratios of your application. Small resolutions can be shown with the decimal point,e. g. for the position indicator or the tachometer. A special feature is the possibility of displaying an information text in the display,e. g. for the surveillance of maintenance cycles. In this case the desired informationis shown in the display after reaching the fixed preset value. You can display any textthat can be created with the 7-segment alphabet, e. g. STOP, HELP, FILTER etc.
Special functions Impulse Tacho- Time Numerical Position Differentialfor counter meter counter display indicator counter
Prescaler value x x x x0.001 bis 99,999Decimal point x x x x0 to 3 positionsbehind the commaPreset value x x0 to 99 999 999Information text x x(on reaching thepreset value)LCD = 8 charactersLED = 6 characters
1) not available for standard type 3
2) not available forstandard types 1, 2, 3
3) only available forstandard type 5
Model tico 731
0 731 7
Standard version:1 Standard model 12 Standard model 23 Standard model 34 Standard model 45 Standard model 5
Function:1 Impulse counter2 Tachometer (1/min)1)
3 Time counter (hhhh:mm:ss)4 Time counter (hhhhhh.hh)6 Position indicator (2-channel)2)
7 Counter with differential mode3)
4) not available for time counters5) not available for tachometers
and position indicator
P: (Value);
D: (Value);V: (Value);T: (Text);
Choose version and basic function:
Please state the desired special version on your order:
Prescaler value: 0.001 to 99.9994)
Decimal point: 0 to 3 positions after the dot4)
Preset value: 0 to 99 999 9995)
The information text displayed on reaching the preset value can be built up as required from the 7-segment alphabet
S* Option: with plug-in
screw terminals only for standard model 1, 2*
77Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 007Multifunctional-CounterBi-directional
high-contrast LED or LCD-Display, 6 digits small and compact DIN dimensions 48 x 48 mm easy operation by one key per digit direct access to parameters available with 1 or 2 presets transistor and relay with changeover contact, for each preset with integrated separate totalizer 5 basic functions easily programmable: counter, tachometer, time counter,
shift counter and batch counter display range from – 99999 to 999999
F1 F2 PSC PRG F1 F2 PSC PRG
F1 PRG PRGF2 PRGPSC
Reset
R 46
E
E
E
5 E 6
E
E
E
32E
E
1E
count mode
programming mode
and POWER ON and POWER ON
> 5 sec
preset 1 preset 2 prescaler function-parameter e.g. Basic-function*
count modedecimalpointreset/set-modesignal lengthpnp/npn-selectionreset modeoutput memorytime counter-tachometerkeylock for:manual resetpreset 1 or 2prescaler
* only formultifunction version
countertachometertime countershift counterbatch counter
PROGRAMMING
The important values, preset 1, preset 2, prescaler and separate totalizer can be direc-tly selected. It is necessary only to press the relevant button and the E-buttontogether. To make the operation still more easy, access to those values can be lockedseparately. All other system parameters like operation and count modes are laid downin a common operation level. These parameters are usually programmed once onlyduring the first initiation.
tico 732
Components 200178 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TECHNICAL DATA
General
Counter
Tacho
Time-counter
Display LED or LCD, 6 digits, leading zero suppression, decimal pointDigit height LED 7.6 mm; LCD 9 mmSupply voltage 12...24 VDC; 24 VAC; 115 VAC; 230 VAC; 50/60 Hz
depending on versionCurrent consumption 12...24 VDC < 150 mA
100/115/230 VAC < 50 mA; including sensor supplySensor supply only when AC operated: 12 ... 30 VDC, max 50 mAData retention non-volatile memory > 10 yearsOperating temperature 0 ... +50 °CStorage temperature - 20 ... + 70 °CElectrical connection screw terminalsMounting with clamping frameProtection class (IEC 144) front side IP 65, terminals IP 20Vibrostability 10 m/s2 (10...150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to VDE 0411, DIN 57411, protection class IIApprovals UL + CUL E 96337Amplitude thresholds < 2 V and > 8 V, max 40 VDCActive edge programmable; positive with pnp input; negative with npn inputPulse shape any (squarewave 1:1 for max. frequency)Input resistance approx. 5 kOhm (static)Counting frequency max. 5 kHz (2.5 kHz bi-directional)Prescaler programmable from 0.001 to 9.999 (999.999)Count inputs A, B - phase discriminator with single evaluation
- differential mode (add/sub)- count direction mode- totalizing mode (add/add)
Pulse length min. 17 ms (30 Hz), 100 µs (5 kHz)Control input C - manual reset possible
- external reset, static or dynamic, programmable,pulse length > 5 ms
- automatic reset when main preset has been reached (programmable)
Relay changeover contact max. 250 VAC / 30 VDC, min. 5 V AC/DCmax. 1 A, min. 10 mA, delay < 5 ms
Transistor pnp output 12...24 VDC max 10 mA of DC-supply; 12…30 VDCmax. 10 mA of AC-supply
Method time interval (1/Tau)Display range 1/min or 1/secMin input frequency 0.125 Hz = 8 secAlarms 2 alarms with programmable start-up-suppressionTime bases programmable; sec, min., h or hh.mm.ssResolution programmable 1; 0.1; 0.01; 0.001Function single pulse measurement (short time meter) or cumulated
counting (hour meter)Count mode pulse width or period measurement (start-stop)
DIMENSIONS
tico 732
Dimensions in mm
clamping frameplug terminal
79Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Display Preset 12–24 VDC 24 VAC 115 VAC 230 VAC
LCD – 0 732 000 0 732 071 0 732 037 0 732 001LCD 1 0 732 002 0 732 0731 0 732 0391 0 732 003LCD 2 0 732 012 0 732 078 0 732 049 0 732 013LED – 0 732 018 0 732 080 0 732 055 0 732 019LED 1 0 732 020 0 732 0821 0 732 057 0 732 021LED 2 0 732 030 0 732 087 0 732 067 0 732 031
Important: Only versions with 2 presets or without preset can be used as tachometers.
ORDER INFORMATION
Display
LCD
LED
Function
Tacho
Time counter +totalizer
Shift counter*
Batch counter*
no output
1 output(1 relay,1 transistor
2 outputs(2 relays,2 transistors)
12 - 24 VDC
230 VAC
Outputs Power supply
Counter +totalizier
100 VAC
115 VAC
CONNECTION DIAGRAM
POSSIBLE VARIANTS
tico 732
For versions with no output, pins 7–9 and 15-17 are not connected.
VDC 1 Rel/1 Trans
VDC 2 Rel/2 Trans
VAC 1 Rel/1 Trans
VAC 2 Rel/2 Trans
Components 200180 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
LCD display, 8 digits, 12 mm height, excellent contrast through Backlighting with a 10-28 VDC supply Lithium battery power supply Decimal point, input scaling, count direction, output mode, etc. programmable,
depending on model Programming reduced to a minimum for easy handling and set-up CE approval, IP 65, NEMA 4 Suitable for TTL Mounting depth 29 mm
MODEL OVERVIEW
Flexible Counter Seriesin DIN size 36 x 72 mm
The family tico 734 consists of ten models:
0 734 000 Totalizer without scaling0 734 001 Add/Subtract totalizer0 734 002 Position indicator0 734 003 Tachometer0 734 004 Programmable rate meter0 734 005 Rate meter with totalizer0 734 006 Time counter0 734 007 Preset counter0 734 008 Time preset counter0 734 009 Rate meter 005; with total and pulsed output
Totalizer (0 734 000)8 digit, reset key can be enabled/disabled via enable input
Add/Subtract Totalizer (0 734 001)8 digit differential counter, A-B, prescaler 0.0001 to 99.9999, deci-mal point, count offset range from -999,999 to 999,999, reset key can beenabled/disabled.
4 Remote reset, NPN3 Input A, 30 Hz, NPN2 Input A, 10 kHz, PNP1 0V, Common5 Front panel reset enable6 Not used7 Not used8 DC-supply for backlighting
Suitable option modules: 1 734 0.. 10, 12, 14, 17, 19
4 Remote reset, NPN3 Input A, 30 Hz, NPN incrementing2 Input A, 10 kHz, PNP incrementing1 0V, Common5 Program enable6 Input B, 30 Hz, NPN, decrementing7 Input B, 10 kHz, PNP, decrementing8 DC-supply for backlighting
Suitable option modules: 1 734 0.. 10, 12, 14, 17, 19
tico 734
tico 007
81Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Internal Single or dual lithium 3 V battery (CR 1/2 AA), typical lifetime of 5 years (10 yrs w/2 batteries). „Lo BAT“ display flashes approximately 2 weeks prior to end of battery life.
via Option Module 120/240 VAC provides 12 VDC for display backlighting andreduces battery load in models with SSR output
Display LCD, 12 mm height, 8 digits for countersBacklighting Whole display area can be backlit with a 10-28 VDC supply,
green-yellow colourHigh Speed Input (2) PNP, ≤ 28 VDC, max. 10 kHz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impulse > 45 µs, impedance 1 MΩLow Speed Input (3) NPN, ≤ 28 VDC, max. 30 Hz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impedance 1 MΩHigh Voltage Option 100..260 VAC/DC, 30 Hz, 1 MΩ, with internal Module connection to input (3)Low Voltage Option 5..30 VAC/DC, 30 Hz, 17 kOhm, with internal connection Module to input (3)Enable Input (5) NPN, 28 VDC, level sensitiveReset Input (4) NPN, 28 VDC, edge triggered, max. 30 Hz (50 % duty cycle)Mounting Front panel mounting with mounting bracketDimensions DIN 36 x 72 mm, 36 mm total depth, total width 83 mmPanel Cutout 33+0.3 mm x 68+0.3 mm, depth behind panel < 29 mmPanel Thickness max. 8 mmFront Panel Rating IP 65.Operating and Storage 0 °C to + 55 °CTemperature - 20 °C to + 60 °CGeneral DIN EN 61010 part 1 / VDE 0411 part 1
Protection according to class II, Contamination level 2 Overvoltage category II
Technical data tico 734
Control Inputs
Physical
Environmental
Count Inputs
Display
Power Supply
A: gasket, B: mounting bracketincl. option modul
DIMENSIONS
Dimensions in mm
1) Panel cutout: 33 x 68 mm2) Panel thickness: max 8 mm
FUNCTIONS OVERVIEW
Components 200182 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 734 Technical data
Power 115 VAC or 230 VAC (see wiring), frequency 50/60 Hz. Terminal (8) provides Supply (E-H) an unregulated 10-20 VDC supply for powering sensors up to 50 mARelay Type: SPDT (Form C) mechanical relay; Operate Time: 6 msOutput 5A, 120/240 VAC or 30 VDC, silver alloy(A-B-J) Electrical Life: > 500 000 operations, Mechanical Life: > 10 million operationsHigh Voltage Range: 100 to 260 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 200 kOhmLow Voltage Range: 5 to 30 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 127 kOhmMounting Attaching on back of instrumentDimensions 42 x 69 mm, depth 58 mm, total depth behind panel with instrument 82 mmTemperature Operating: -0° C to +50° C; Storage -40° C to +90° C;General DIN EN 61010 part 1, Protection according to class II
Contamination level 2; Overvoltage category II
OPTION MODULES
With the Option Modules, the tico 734 can be functionally extended and adaptedto special application conditions. The following option functions are available: AC power supply providing sensor supply 10-20 VDC / 50 mA and 12 V supply
for display backlighting (supports the battery in models with SSR output) Relay output, changeover contact, 5 A, 120/240 VAC or 30 VDC High voltage input (100..260 VAC/DC, max. 30 Hz, 200 KΩ)
Connections 010 011 012 013 014 015 016 017 018 019 020
High Voltage Input C-D x x x xRelay 1 x change over A-B-J x x x x x x AC power Supply E-F, G-H x x x x x xLow Voltage Input C-D x x x x
1734 …
TECHNICAL DATA
WIRING
ORDERING INFORMATION Panel Instruments
Totaliser 0 734 000Add/Subtract Totalizer 0 734 001Position Indicator 0 734 002Tachometer 0 734 003Programmable Rate Meter 0 734 004Rate Meter with Totalizer 0 734 005Elapsed Time Indicator 0 734 006Preset Counter 0 734 007Preset Timer 0 734 008Rate Meter with Total 0 734 009and Pulsed OutputLithiumbattery E3533 355
Option Modules
HV Input 1 734 010Relay 1 734 011AC Power 1 734 012HV Input and Relay 1 734 013HV Input and Power 1 734 014Power and Relay 1 734 015HV Input/Power/Relay 1 734 016LV Input 1 734 017LV Input and Relay 1 734 018LV Input and Power 1 734 019LV Input/Power/Relay 1 734 020
All modules contain 17 terminals. Theexact functions that are present aredetermined by the model of instrumentand option module (see Functions Over-view).1-8 Connection to instrument
(refer to appropriate operatinginstructions)
A Normally Open Relay ContactB Relay CommonJ Normally Closed Relay
ContactC-D High or Low Voltage Input, no
polarity, (provides NPN signal on terminal 3)
E-F 115 VAC Line winding IG-H 115 VAC Line winding II
83Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Flexible Counter Series, DualColour Display in DIN size 48 x 96 mm
Input Modes, Features Value Range
A+B, A-B, Direction, Quad 0...99999Preset Value used for colour switching 0...99999
tico 735
Totalizer
COUNTING - MEASURING - INDICATING - MONITORING - TRANSMITTING
Because of the unlimited number of measurements it can handle, the tico 735 devicefamily is equally well suited to applications in the world of impulse and time coun-ting as to those in the processing area.If you are looking for display clarity and high levels of accuracy, then the tico 735is the right choice for you. The dual-colour display is unique, highlighting an alarmsituation or an excess value at a single glance. You can programs your own choiceof display colour to indicate normal or alarm conditions.
FEATURES Brilliant 18.5 mm high dual-colour red/green LED display with programmablecolour settings
As standard, all models have limit or preset values Scaling available as standard Universal Power Supply 90...264 V AC or 20...50 V AC/DC Simple structured operation with switchable help function
External Program Lockout DIN housing 48 x 96 mm, mounting depth < 100 mm Conveniently sized Screw Terminals Large keys offer safety and ease of operation
NPN and Relay Outputs Option: RS 485 ASCII protocol serial interface for all versions. ”Remote Display”
version receives process values over RS 485
Components 200184 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONS
Technical data
Display and Keyboard
Physical
Operating conditions
Approvals
Option RS 485
Primary Display Red/Green, 7 segment LED, 5 digits, height 18.5 mmSecondary Display single digit 7 segment LED, height 7 mm, red/greenOutput Indicators 2 red LEDs for OUT 1 and OUT 2 statusKeyboard 4 rubber keys for programming and manual reset
Front Dimensions DIN 48 mm x 96 mm, 110 mm total depthMounting Front panel mounting (mounting bracket supplied)Panel Cutout 45 mm x 92 mm, panel thickness max 12 mmConstruction Front carrier with PCBs can be pulled outTerminals Screw Type (combination head)
Power Supply 90 - 264 V AC 50/60 Hz (electrically separated from all inputs and outputs) or 20...50 V AC / 22...55 V DC
Temperature Operation: 0 °C to +55 °C (32 °F to 131 °F)Storage: -20 °C to +60 °C (-4 °F to 176 °F)
Relative Humidity 0 to 90 %, non-condensing
Protection Frontpanel IP 66CE EN 50082-1/92-95; EN 50081-1/92, -2/94Safety DIN EN 61010 part 1; protection according to class IIGeneral UL, CUL, Overvoltage cat. II, Contamination level 2
Type RS 485, serial asynchronous, Open ASCII, Master-Slave, up to 99 zones
Parameters 9600...1200 Bd, 1 start, 7 data, 1 stop, even parity
tico 735
10096
48
tico 735
PGM RST
Dimensions in mm
85Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 735
ORDERING DATA
129 8 7 6 5 4 3
10
11
12
13 14 15 16 17 18 19 20 21
22
23
24
RS 485B A + 0V Relay OUT1
LinearOutput
+
-
0V
OU
T1N
PN
CTRL
1
CTRL
2
Aux.
Pow
er
0V
Inpu
t A
Inpu
t B
OU
T2N
PN
NC
RelayOUT2
NC
~ ~90-264 VAC
22-50 VDC/ACor
TERMINALS
Special Features
Control Inputs
Count Inputs Active Edge NPN or PNP programmable; capable of TTL; 30 V DC maxwith PNP High ≥ 3.0 V, Low < 2.0 V or open; 10 kOhm to 0 Vwith NPN High ≥ 3.0 V or open, Low < 2.0 V; 4.7 kOhm to V+Frequency 20 Hz, 200 Hz or 10 kHz programmable
CTRL1 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+ (Reset or hold) edge sensitive; 25 ms min., max 30 V DCCTRL 2 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+(Progr. security)) level sensitive; 25 ms min.; max 30 V DC
Display colour programmable Preset Lockout and Reset Disable programmable Program Security via CTRL 2 Scaling available as standard
Type 0735 P
Function1 Totalizer2 Position Indicator4 Tacho/Rate Meter5 Rate + Totalizer6 Time Counter7 1 Preset Counter8 2 Preset Counter9 Batch Counter
Power Supply0 90…264 V AC2 20…50 V AC or
22…55 V DC
Ordering code1 901 004
Output Relay 20 none1 with Relay 2
nicht für Funktion1, 6, 7
Interfaces0 none5 with RS 485
Linear Output0 none3 with 4-20 mA
(only with function 2, 4, 5)
Option modulRS 485 Interface
0 7 3 5 P
Components 200186 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Large, 6-digit, 14 mm high LED display Prescaler 2 variable limit values Eeasy direct selection by 2 function keys Rrelay output with two change-over contacts Cconnection by plug-in screw terminals Chain value or absolute value indication Small compact design in DIN dimensions 48 x 96 mm Electronic value retention, non polluting – no battery npn/pnp programming of inputs Optional with RS 232/RS 485 interface
APPLICATION FIELDS
Position Indicator with/without Limit Values
Indication of infeed values, lengths, support- or machine positions, totalizingvalues etc.The coupling to the machine may be effected e. g. with an incrementalshaft encoder from the wide and comprehensive Hengstler program of types RI 30to RI 58.
6-digit LED display with 14 mm high digits, easy to read, decimal point can be programmed
DISPLAY
Bereich ABereich BP2
PSC
SET
P1
CHAIN
signo 727 HENGSTLERSection B Section A
Section A: shows the actual count value when in counting mode, and the chan-geable parameters when in programming mode.
Section B: LED indicators showing the active output signal, and in programmingmode indicating the changeable parameter.
PROGRAMMING
Operation level 1 Operation level 2 Operation level 3
P 1: Limitvalue 1
P 2: Limitvalue 2
System-parameters
-,-,-,- Decimal point
SET: setvalue
Direct access with function keys F1 and F 2
PSC: Prescaler
Programming of signo 727 is possible by direct access and in the 3 operation levels.Direct access: Limit value 1, Limit value 2 are set with the function keys F1,
F2Operation level 1: Set valueOperation level 2: Includes prescaler and decimal pointOperation level 3: Includes system parameters, which are normally programmed
during start-up procedure only.
Unauthorized programming of the signo 727 is prevented by a control input, whichcan lock the operation levels.
signo 727.1
Technical data
87Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Display 7-segment LED, 6 digits, suppression of leadingzeros, programmable decimal point
Digit Height 14 mm Power Supply Voltage Ub 12 … 24 VDC or 115/230 VAC, depending on version Current Consumption 12 … 24 VDC < 250 mA,
115/230 VAC < 60 mASensor Supply AC operation: 12 … 24 VDC,
DC operation: Ub – 2 V, Imax. = 60 mA
Data Retention non-volatile memory > 10 yearsOperating Temperature 0 … 50 °C Storage Temperature –20 … +70 °C Electrical Connection plug-in terminalsMounting with clamping frameProtection Class (IEC 144) front side IP 54, terminals IP 20Noise Immunity EMC severity according to IEC 801, part 2 + part 4Vibrostability 10 m/s2 (10 … 150 Hz) according to IEC 68-part 2–6Shock Stability 100 m/s2 (18 ms) according to IEC 68-part 2–27General Rating according to VDE 0411, DIN 57411, protection class II
Inputs: Switching Level < 2 V and > 8 V, max. 40 VDC Active Edge positive when pnp input
negative when npn inputPulse Shape any (square 1:1 at max. frequency)Input Resistance approx. 5 kΩ (static)Count Input with prescaler programmable 0.0005 bis 99.9999
– as phase discriminator input with single, double or quadruple evaluation
– as differential input– as up/down input
Pulse Duration 12,5 µs (40 kHz), 17 ms (30 Hz) Count Frequency max. 40 kHz or 30 Hz
Control Input: Application Input 1 static, pulse duration > 3 msDisplay-Hold or Reset-enable, (programmable)Application Input 2 (Reset functions)Reset and/or Chain- pulse duration > 3 ms or > 17 ms Reset, (programmable)Gate static, pulse duration > 12 µs / > 17 msKeylock static, pulse duration > 3 ms
Outputs:Relay* Out 1 and Out 2Contact Type changeover relaySwitching Voltage max. 250 VAC / 30 VDC, min. 5 VAC/DCSwitching Current max. 1A, min. 10 mATransistor* Out 1 and Out 2, PNP, 10 mA
* for versions with limit value only
TECHNICAL DATA
signo 727.1
Components 200188 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
(here with Limit values)
signo 727.1
DIMENSIONS
plug-interminals clamping frame
dimensionsin mm
CONNECTION DIAGRAM
ORDER INFORMATION Type Supply Ordering code
signo 727 without limit values 12 … 24 VDC 0 727 101signo 727 without limit values 115/230 VAC 0 727 102signo 727 with 2 limit values 12 … 24 VDC 0 727 121signo 727 with 2 limit values 115/230 VAC 0 727 122
This counter is available with several interfaces. See next pages.
Variable Preset Counter and Position indicator with Interface RS 485 / RS 232
signo 723signo 727
89Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
TECHNICAL DATA
Large 6 digit LED display, 14 mm
Up-/down counter, 6 digits, with different count modes and prescaler
2 preset values or 2 limit values
Transistor outputs (PNP) and relay outputs (changeover contacts)
Compact DIN 48 x 96 mm
Easy manual operation with function keys
Interface: RS 485 or RS 232
Protocol
RS 485
Power Supply Voltage 12...24 VDC or 115/230 VACSensor Supply AC-operation: 12...24 VDC, DC-operation: Vop-2V, Imax. = 60 mA
Inputs:Switching Level < 2 V and > 8 V, max. 40 VDCActive Edge positive PNP or negative NPN programmableCount Input with prescaler programmable 0.0005 ... 99.9999
- as phase discriminator input with single, double or quadruple evaluation
- as differential input- as up/down input
Count Frequency max. 40 kHz or 30 HzControl Inputs Reset, Gate, Hold and Keylock
Outputs:Relay Out 1 and Out 2 with changeover contact, 1 A, 250 VAC/30 VDCTransistor Out 1 and Out 2 with PNP-Output, 10 mAMaximum length 15 m
Input R x DTypical input resistance 5 kOhmMax input voltage 30 V
Input T x DOutput voltage 8 VOutput current max. 20 mA
Terminals A and BTypical input resistance 12 kOhmMax input voltage – 7 .. + 12 VOutput level High: 3.5 V, Low: 1.3 VOoutput current max. 60 mAMaximum bus length 2000 mData transfer rate 1200, 2400, 4800 BaudData format 7 bits, even parity
8 bits, no parityStop bits 1Protocol Hengstler TP3 or ASCII (depending on version)
RS 232
For further technical information please refer to the pages describing signo 723.1 and signo727.1
signo 723signo 727
Technical data
DIMENSIONS
Components 200190 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
CONNECTION DIAGRAM
PRINTER PROTOCOL FOR 723.1
PRINT MASKS
Protocol Standard ASCII Baudrate 1200, 2400, 4800 BaudData format 7 Bits, even Parity, 1 Stop bit
8 Bits, no Parity, 1 Stop bitLine and Form Feeds programmable before and after printoutCutter Control programmable
The counter allows for the programming of 5 different print masksMask 0 only Count ValueMask 1 Counters: <value> Mask 2 Counter: <value>Mask 3 Counter: <value>
Preset1: <value>Preset2: <value>Set: <value>Prescaler: <value>
Mask 5 Length: <value> m
(here with interface RS 485)
9648
socket connectorsclamping frame
dimensions in mm
108
panel cutout: 45 x 92
Technical data signo 723signo 727
91Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Remote Terminal ConverterRTCThe RTC is needed if more than one counter is to be connected to the PC or if thedistance between the machine and the PC is longer than 15 m. up to 31 counters can be connected to the RTC via RS 485 bus Connection RTC - PC is a standard RS 232 optimally tuned for operation with the Hengstler Software HTS (Hengstler Ter-
minal Server) Power supply 12..24 VDC or 12..18 VAC, max. 2 VA (plug-in power supply avai-
lable as accessory)
DIMENSIONS width 115 mm / height 38 mm / depth 165 mm
CONNECTION DIAGRAMS Connector ST 1
pin signal1 AC/DC2 Earth3 AC/DC
Connector ST 3
pin signal1.3 RS 485 A +2.4 RS 485 B -5 Earth
Connector ST 2
pin signal description1 DCD Carrier Detect2 RXD Receive Data3 TXD Transmit Data4 DTR Data Terminal Ready5 GND Signal Ground6 DSR Data Set Ready7 RTS Request To Send8 CTS Clear To Send9 RI Ring Indicator
ORDER INFORMATION
Counter
Counter with time counter
PC-driversoftware forTP3 Protocol
RTC ConverterRS 485 / RS 232
Version with interface 12...24 VDC 115/230 VACsigno 723 Printersoftware RS232 0 723 150M1 0 723 151M1signo 723 TP3 Protocol RS232 0 723 150M3 0 723 151M3
RS485 0 723 160M3 0 723 161M3signo 727 TP3 Protocol RS232 0 727 150M3 0 727 151M3
RS485 0 727 160M3 0 727 161M3
signo 723 TP3 Protocol RS485 0 723 125 0 723 126
Windows 3.X 0 723 165Windows 95 / NT 0 723 167DOS (ab 3.2) vt3com.exe 0 723 166TP3.com 0 723 168
RTC 0 723 169Plug-in power supply for RTC 3 560 032Connection cable RTC-PC (RS 232), 5 m 1 723 055
signo 723signo 727
Windows Software HTS for Counters
Components 200192 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
‘ Logical counter adressConst CounterAddress = 25‘ registers of a counterConst CounterValue = 0Const Preset1 = 1Const Preset2 = 2Const Chain = 3
‘ read counter and insert result in table 1Sub Read_Counter()
Set Hts = GetObject(Class:=“Hengstler.TerminalServer.10“)Result = Hts.ReadRegister(CounterAddress; CounterValue)Sheets(„Table1“).Cells(6; 2).Value= Result
Ende Sub
Sub Write_Counter()Data = Sheets(„Table1“).Cells(2; 2).ValueSet Hts = HoleObject(Class:=“Hengstler.TerminalServer.10“)Result = Hts.WriteRegister(CounterAddress; CounterValue; Data)
Ende Sub
EXAMPLE
EXAMPLE
Reading and writing a counter from within MS Excel:
Guided Setup A program group and start icon are created automatically Setup registers the OLE attributes of HTS in the Windows registry DDE- and OLE Server
The driver can be called in several ways: Command line (DOS prompt) within a batch file from within an application, e.g. via system() function call Automatic handling of several counter registers by means of a job file.
Example of a driver call (uploading preset value 2): literal value: vt3com.exe 25 dw I002 #89462value out of a file: vt3com.exe 25 dw I002 value.dat
Connection to DOS Hengstler TerminalDriver vt3com.exe
93Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Plug-in Totalizing Counter with LED display
6-digit LED display Gate input circuit Manual or electrical reset Value retention > 10 years without battery (NV memory) Counting frequency programmable for 30 Hz or 5 kHz Plugs into modular system 400
Type 710
TECHNICAL DATA Display 6-digit, LED with leading-zero suppressionDigit height 7 mmSupply voltage Vop 12 … 24 VDCMax. current consumption 75 mAValue retention approx. 10 years, NV memoryOperating temperature – 10 … + 50 °CStorage temperature – 20 … + 70 °CProtection class (IEC 144) front IP 40; connections IP 00Interference immunity EMC severity 2 acc. to IEC 801 Pt. 2, severity 3 IEC 801 Pt. 4Vibrostability 50m/s2 (50 – 500 Hz) to IEC 068-2-6Shock stability 150 m/s2 (11 ms) acc. to IEC 068-2-27General design acc. to DIN VDE 0411; insulation group CWeight approx. 57 gInputsAmplitude thresholds < 2 V and > 8 V, max. ± 40 VDCActive edge positive or negative, depending on versionPulse shape random (squarewave 1:1 for max. frequency)Input resistance approx. 15 kΩCount input addingPulse length min. > 100 µs/> 17 ms, depending on counting frequencyCounting frequency max. 5 kHz / 30 Hz, depending on versionControl inputs with static behaviourReset - manual, with button
- electric, pulse length > 250 msGate static, pulse length > 100 ms
CONNECTION DIAGRAM
Type 710 Technical data
Components 200194 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Inputs Counting Gate Display up/down Ordering code Ordering codefreqency Hold with without
PNP NPN 5 kHz 30 Hz reset button reset button
X – X – X – – 0 710 403 0 710 401X – – X X – – 0 710 404 0 710 402 – X X – X – – 0 710 413 0 710 433– X – X X – – 0 710 423 0 710 443 X – X – – X – 0 710 407 0 710 405 X – – X – X – 0 710 408 0 710 406 X – X – – – X 0 710 450 –X – – X – – X 0 710 451 –
Standard accessoriesConnection box 1 405 566 Panel frame, black 1 405 491 Power supply for 110/220 VAC see accessory modulesHousing, protection cover see accessories
ORDER INFORMATIONCounters
50
50 38
60
26.5 66
88
29
25
DIMENSIONSwith connection box
with connection box and panel frame
All dimensions in mm
Plug-in Totalizing Counters,Modular System 400
Types 464-468
95Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
4, 6, or 8-digit display with manual/electrical reset or
without reset Simple installation Easy maintenance through plug-in
system Can be combined with other
counters in the modular system
Counter with connection boxCounter with connection box andpanel frame
Display 4, 6 or 8-digit, depending on versionDigit height 4 mmSupply voltage Vop according to order information, tolerance ± 10 %
230 VAC +6 %–10 %Power consumption DC counter: counter 2.5 W/VA, reset magnet 12 W/VA
AC counter: counter 2.75 W/VA, reset magnet 16 W/VAOperating temperature - 10 . . . + 50 °CStorage temperature - 20 . . . + 70 °CProtection class (EN 60529) front IP 40; connections IP 00Vibrostability 50 m/s2 acc. to IEC 068-2-6Shock stability 600 m/s2 (6 ms) acc. to IEC 068-2-27General design acc. to DIN VDE 0435; contamination level 2 VDE 0110Maintenance-free operation counter 2 x 107, reset magnet 1.5 x 106 pulsesDuty cycle at 25 °C Counter 100 %, reset magnet: DC 20 % max. 2 min.,
AC 10 % max. 1 min.Weight approx. 90 gApprovals UL: E 176396Count input addingPulse length min. DC counter: counter 20 ms, reset magnet 200 ms
AC counter: counter 50 ms, reset magnet 200 msCounting frequency max. DC counter: counter 25 Hz, reset magnet 1 per s
AC counter: counter 10 Hz, reset magnet 1 per 2 sPulse duty factor counter 1:1, reset magnet: DC 1:5, AC 1:10Reset depending on version
- manual with button or key– electric (version with reset magnet)– without reset
CONNECTION DIAGRAM
TECHNICAL DATA
Technical data
Components 200196 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Types 464-468
4 digits 6 digits 8 digits
Voltage button reset. el. reset button reset el. reset w/o reset without reset24 V DC 0 465 165 0 465 765 0 464 165 0 464 765 0 466 165 0 468 16524 V AC 0 465 186 0 465 786 0 464 186 0 464 786 0 466 186 0 468 186
115 V AC 0 465 189 0 465 789 0 464 189 0 464 789 0 466 189 0 468 189230 V AC 0 465 190 0 465 790 0 464 190 0 464 790 0 466 190 0 468 190
connection box ordering code 1 405 464,Panel frame, black ordering code 1 405 491,Key-reset system ordering code + SR e.g. 0 465 165 SRCase, covers see accessories
Inquire for other versions
DIMENSIONS
ORDER INFORMATIONCounter
Standard accessories
Front view Side view Installation cutout
with connection box
with connection box and panel frame
All dimensions in mm
tico 007
97Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Display 6 or 8-digit, depending on versionDigit height 4 mmSupply voltage Vop according to order information, tolerance +– 10 %
230 VAC + 6–10 %Power consumption DC counter: counter 2.5 W/VA, reset magnet 12 W/VA
AC counter: counter 2.75 W/VA, reset magnet 16 W/VAOperating temperature - 10 . . . + 50 °CStorage temperature - 20 . . . + 70 °CProtection class (EN 60529) front IP 40; connections IP 00Vibrostability 50 m/s2 acc. to IEC 068-2-6Shock stability 600 m/s2 (6 ms) acc, to IEC 068-2-27General design acc. to DIN VDE 0435; contamination level 2 VDE 0110Maintenance-free operation counter 2 x 107, reset magnet 1.5 x 106 pulsesDuty cycle at 25 °C counter 100 %, reset magnet: DC 20 %, max. 2 min.,
AC 10 %, max. 1 min.Weight approx. 90 gApprovals UL: E 41784-8Count input addingPulse length min. DC counter: counter 20 ms, reset magnet 200 ms
AC counter: counter 50 ms, reset magnet 200 msCounting frequency max. DC counter 25 Hz, reset magnet 1 per s
AC counter 10 Hz, reset magnet 1 per 2 sPulse duty factor counter 1:1, reset magnet: DC 1:5, AC 1:10Reset depending on version
- manual with button or key- electric (version with reset magnet)- without reset
TECHNICAL DATA
Totalizing Countersfor Front Panel Mounting
Types 864-868
Front panel 56 x 40 mm
6 or 8-digit display with manual/electrical reset or without reset Simple installation Various front panel sizes
Front panel 55 x 28 mm
Components 200198 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Types 864-868 Technical data
CONNECTION DIAGRAM
Dimensions in mm
DIMENSIONS(Front panel 56 x 40 mm)
(Front panel 55 x 28 mm)
6 digits 8 digitsVoltage Button reset w/o reset w/o reset
24 VDC 0 864 165 0 866 165 0 868 16524 VAC 0 864 186 0 866 186* 0 868 186*115 VAC 0 864 189 0 866 189 0 868 189230 VAC 0 864 190 0 866 190 0 868 190
Standard accessoryKey reset system Ordering code + SR e.g. 0 864 165 SR
ORDER INFORMATION
Counters for screw attachment(Front panel 56 x 40 mm)
6 digits 8 digitsVoltage Button reset w/o reset w/o reset
24 VDC 0 864 465 0 866 465 0 868 46524 VAC 0 864 486* 0 866 486* 0 868 486*115 VAC 0 864 489 0 866 489* 0 868 489*230 VAC 0 864 490 0 866 490* 0 868 490
Standard accessoryKey-reset system Ordering code + SR e.g. 0 864 165 SR
* on requestFurther voltages available on request.
Counters for spring attachment(Front panel 55 x 28 mm)
99Komponenten 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Miniature size Low power consumption Electrical connections in standard grid Suitable for PCB mounting Machine-solderable and washable versions available Protection class IP 65
TYPE VERSIONS
Totalizing Counters „mini-i“
Type 634: Counter with high immunity against magnetic interference.Type 635: Counter with high shock stability.
Display 6-digitDigit height 4 mm, visualSupply voltage Vop according to order information, tolerance +– 10 %Power consumption Type 634: approx. 50 mW … 440 mW according Version
Type 635: 5…12 VDC 80 mW24 VDC 160 mW
Operating temperature – 10 … + 50 °CStorage temperature – 40 … + 85 °CEl. connection Versions .1 and .3 with solder pins, .7 and .8
with wiring posts 0.6 mmMounting Versions .1 and .3 on PCB's, .7 with wiring posts,
.8 with locating springMounting position horizontalProtection class (EN 60529) Type .1 and .3 IP 65 Housing, IP 00 Connections
Type .7 and .8 IP 66 Front, IP 00 ConnectionsType 8 IP 40 Front in Frontpanel
Vibrostability Type 634: 20 m/s2 (10...500 Hz) acc. to IEC 068-2-6Type 635: 30 m/s2 (10...500 Hz) acc. to IEC 068-2-6
Shock stability Type 634: 2000 m/s2 acc. to IEC 068-2-27Type 634: 3500 m/s2 acc. to IEC 068-2-27
General design according EN 61010-1Contamination Level 2Protection according to class IIOvervoltage category IISusceptibility to magnetic Type 634interference at 100 kA/m (PTB) no effectMaintenance-free operation 10 million pulsesDuty cycle at 25 °C 100 %Weight approx. 10 gPulse length min. 50 msCounting frequency max. 10 HzReset none
TECHNICAL DATA
Type 634/635
Components 2001100 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 634/635 Technical data
Typ 634.8/635.8
DIMENSIONS
Typ 634.3/635.3
Typ 634.7/635.7
Typ 634.1/635.1
CONNECTION DIAGRAM
Dimensions in mm
101Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
634.1 634.3 634.7 634.8
Voltage Ω Ordering code Ordering code Ordering code Ordering code5 VDC 335 0 634 132 0 634 332 0 634 712 0 634 812
12 VDC 335 + RV330 Ω1 0 634 128 0 634 328 0 634 708 0 634 808
24 VDC 335 + RV1K Ω1 0 634 130 0 634 330 0 634 710 0 634 810
ORDER INFORMATION
Type 634
635.1 635.3 635.7 635.8
Voltage Ω Ordering code Ordering code Ordering code Ordering code5 VDC 320 0 635 132 0 635 332 0 635 712* 0 635 812
12 VDC 1860 0 635 128 0 635 328* 0 635 708 0 635 80824 VDC 3720 0 635 130 0 635 330 0 635 710 0 635 810
Connection leads 150 mm red 1 634 008 1 634 008black 1 634 007 1 634 007
* on request
Inquire for optional mounting position and further voltages1 RV internal
Type 634
Type 634/635
Components 2001102 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 635 „mini-iw“ for AC Voltage
Miniature size Low power consumption Simple installation Protection class IP 65
TECHNICAL DATA Display 6-digitDigit height 4 mm, visualSupply voltage Vop according to order information, tolerance +– 10 %,Power consumption at 24 VAC: 85 mW, at 115 VAC: 310 mW,
at 230 VAC: 600 mWOperating temperature – 10 … + 50 °CStorage temperature – 40 … + 85 °CEl. connection screw connection Mounting with clamping frameMounting position horizontalProtection class ((EN 60529) IP 65 Frontside, IP 00 Connections^ IP 40 Front in FrontpanelVibrostability 30 m/s2 (10 . . . 500 Hz) acc. to IEC 068-2-6Shock stability 800 m/s2 (6 ms) acc. to IEC 068-2-27General design according EN 61010-1Contamination Level 2Protection according to class IIOvervoltage category IIMaintenance-free operation 10 million pulsesDuty cycle at 25 °C 100 %Weight approx. 20 gCount input addingPulse length min. 50 msCounting frequency 10 HzPulse duty factor 1:1Reset none
CONNECTION DIAGRAM
tico 007
103Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
ORDER INFORMATION
Technical data
Dimensions in mm
Coil Ordering code
Voltage Resist Clamping term. conn.24 VAC 6.8 kΩ 0 635 811
115 VAC 6.8 kΩ + RV 25 kΩ 0 635 813230 VAC 6.8 kΩ + RV 66 kΩ 0 635 815
Panel Frame 24 x 36 (assembly dimension 22 x 33) Ordering code 1 405 674
Inquire for other versions
DIMENSIONSClamping terminal connection
Type 635
Components 2001104 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 635 for DIN-Rail Attachment
DIN rail attachment Wide voltage range Screw terminal connection No reset
TECHNICAL DATA
5-24 VDC 115/220 VCONNECTION DIAGRAM
Display 6-digitDigit height 4 mm, visualSupply voltage Vop 5, 12, 24 VDC or 115/220 VDC/VAC, dep. on version
DC version ±10 %, 230 VAC +6 –10 %Power consumption 80 mW on 5 VDC, 200 mW on 12 VDC, 400 mW on 24 VDC,
350 mW on 115 VAC, 665 mW on 220 VACMax. residual ripple DC operation: 48 %Operating temperature – 10 … + 50 °CStorage temperature – 40 … + 85 °CEl. connection screw terminals, max. 2.5 mm2
Mounting 35 mm DIN railProtection class (IEC 144) IP 10Vibrostability 50 m/s2 acc. to IEC 068-2-6Shock stability 2000 m/s2 (3 ms) acc. to IEC 068-2-27General design acc. to VDE 0435; contamination class 2 acc. to VDE 0110Duty cycle at 25 °C 100 %Maintenance-free 107 pulsesWeight approx. 40 gCount input addingPulse length min. 50 msCounting frequency max. 10 HzPulse duty factor 1:1Reset none
tico 007
105Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Dimensions in mm
DC Impuls Counter AC/DC Impuls Counter
Supply voltage 5, 12 and 24 VDC Ordering code 0 635 532Supply voltage 24 VAC Ordering code 0 635 541Supply voltage 115 and 230 VDC/VAC Ordering code 0 635 550
Typ 635
DIMENSIONS
ORDER INFORMATION
Components 2001106 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Types 872-877 Totalizing Counters „Piccolo“
TECHNICAL DATA
Miniature size 4, 5, 6 or 7-digit display Connection with AMP plug With or without reset Simple attachment
Rear screw mounting
Front panel mounted
Display 4, 5, 6 or 7-digit, depending on versionDigit height 4 mmSupply voltage Vop according to order information table ± 10 %, 230 VAC +6–10 %Current consumption DC versions 1.5 W; AC versions 2.5 VAOperating temperature – 10 … + 50 °CStorage temperature – 20 … + 85 °CEl. connection AMP plug 0.8 x 2.8 mmMounting Central or clamping spring attachment, depending on versionProtection class (EN 60529) Typ 872/874/ – front IP 40
876/877– connections IP 00
Typ 873/875 – front IP 30– connections IP 00
General design EN 61010-1Protection class IIContamination class 2Overvoltage category II
Noise emittance EMC EN 50081-2Noise immunity EMC EN 50082-2Duty cycle at 25 °C 100 %Maintenance-free operation 107 pulsesWeight approx. 80 gApprovals UL: E 41784-6Count input addingPulse length min. DC versions 25 ms, AC versions 50 msCounting frequency max. DC versions 20 Hz, AC versions 10 HzPulse duty factor 1:1Reset depending on version
– manual with button– none
CONNECTION DIAGRAM
107Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
DIMENSIONS
Type 872.1, 873.1, 874.1(874.0 dimensions without front panel)
Type 875.1, 876.1, 877.1(875.0 + 877.0 dimensions without front panel)
Dimensions in mm
5-digit 7-digitwithout reset with reset without reset
0 874 026* 0 875 026 0 877 026 0 874 027 0 875 027 0 877 027
0 877 032 0 874 033 0 877 033 0 874 034 0 875 034 0 877 034 2 873 026 2 875 004 2 875 004
ORDER INFORMATIONCounters with central attachment
Voltage Ω
12 V DC 12024 V DC 37524 V AC 190110 V AC 5000230 V AC 6000Attaching socket
4-digit 5-digit 6-digit 7-digit without with without with without without reset reset reset reset reset reset
0 872 106 0 873 106 0 874 106 0 875 106 0 876 106 0 877 106 0 872 107 0 873 107 0 874 107 0 875 107 0 876 107 0 877 107
0 873 112 0 875 112 0 876 112 0 877 112 0 872 113 0 873 113 0 874 113 0 875 113 0 876 113 0 877 113 0 872 114 0 873 114 0 874 114 0 875 114 0 876 114 0 877 114
Voltage Ω
12 V DC 12024 V DC 37524 V AC 190110 V AC 5000230 V AC 6000
Counters with front panel attachment
Types 872-877
Components 2001108 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 869 Mini Counters
Miniature size 6 or 7-digit, depending on version Protection class IP 40 No reset
TECHNICAL DATA Display 6 or 7 -digit, depending on versionDigit height 4 mmSupply voltage Vop 24 VDCPower consumption 1.7 WResidual ripple < 48 %Operating temperature – 10 … + 50 °CStorage temperature – 40 … + 85 °CEl. connection flexible lead connection 250 mm, Ord. code 0 869 107
for 150 mmProtection class (IEC 144) front IP 54, connections IP 00Vibrostability 50 m/s2 (10 . . . 500 Hz) acc. to IEC 068-2-6Shock stability 300 m/s2 (6 ms) acc. to IEC 068-2-27General design EN 61010-1
Protection class IIContamination class 2Overvoltage category II
Duty cycle at 25 °C 100 %Maintenance-free operation 107 pulsesWeight approx. 80 gCount input addingPulse length min. 25 msCounting frequency max. 20 HzPulse duty factor 1:1Reset none
CONNECTION DIAGRAM
Base mounting Surface mounting Front panel mounting
109Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Ordering code Ordering code
Version 6-digit 7-digitBase mounting 0 869 207 0 869 007Front panel mounting 0 869 307 0 869 107Attaching socket 1 869 026
ORDER INFORMATION
Technical data
DIMENSIONSRear screw mounting
Dimensions in mm
Front panel mounting
Type 869
Type 853 Totalizing Counter for Surface Mounting
Components 2001110 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
6-digit display Button reset Simple installation
TECHNICAL DATA Display 6-digitDigit height 4 mmSupply voltage Vop 24 VDC ± 10 % or 230 VAC +6 – 10 %,
depending on versionPower consumption DC counter: 2.75 W, AC counter: 4 VAOperating temperature - 10 . . . + 40 °CStorage temperature - 40 . . . + 85 °CProtection class (EN 60529) IP 40Electrical connection terminal connection inside caseVibrostability 50 m/s2 (10 . . . 50 Hz) acc. to IEC 068-2-6Shock stability 300 m/s2 (6 ms) acc. to IEC 068-2-27General design acc. to DIN VDE 0435; insulation group CMaintenance-free operation 4 x 107 pulsesDuty cycle at 25 °C 100 %Weight approx. 150 gCount input addingPulse length min. DC counter: 20 ms, AC counter: 50 msCounting frequency max. DC counter: 25 Hz, AC counter: 10 HzPulse duty factor 1:1Reset manual with button or key
CONNECTION DIAGRAM
Technical data
111Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Base mounting 24 VDC Ordering code 0 853 165Base mounting 230 VAC Ordering code 0 853 190
Key reset Ordering code 1 405 402
Further voltages available on request.
ORDER INFORMATION Counter
Standard accessory
DIMENSIONS
Type 853
Dimensions in mm
Cable guide at rear
Components 2001112 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Types 344-346 Hand Tallys
4-digit display Resettable with rotary knob Rugged, easy to operate Maintenance-free operation
112
Type 344
TECHNICAL DATA Display 4-digitDigit height 4 mmMounting depending on version, handheld with thumb ring,
wall or table-mountedCover plastic (ASB) red, metal on requestWeight approx. 95 gCounting mode adding, 1 stroke = 1 incrementReset rotary knob on the right-hand side
DIMENSIONS
ORDER INFORMATION Hand tallys with thumb ring Ordering code 0 344 001Hand tallys for wall-mounting Ordering code 0 345 001Hand tallys for table-mounting Ordering code 0 346 001
Type 345Type 344
Type 346
113E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
4- or 5 digit display Without reset With or without case Miniature size
Revolution- or Stroke Counters
113Components 2001
surface-mounting flush-mounting without housing
CASE Counters in this series are available with surface-mounting case, with flush-moun-ting case or without any housing.
Display 4 or 5-digit, depending on versionDigit height 4.2 mmMounting depending on versionCase plastic (POM) blackWeight approx. 5 g, with case approx. 9 gCounting mode Revolution counter: + (-) adding in the specified direction,
subtracting in reverse direction. Stroke Counter: + is fixed, adding
Transmission ratio 1:1 or 1:10, depending on versionMax. speed Revolution counter: 1.000 rpm, at a transmission ratio
of 1:10 max. 100 rpm. Stroke counter: max. 500 strokes/min.,switching distance min. 46°, max. 49°
Torque Revolution counter: 0.05 Ncm, Stroke counter: 1.0 NcmReset none
TECHNICAL DATA
Dimensions in mm
DIMENSIONSType 101/301 surface-mounting case
Types 101/103301/309
Type 101/301 surface mounting case Type 101/301 without case
A B
4 19.5 18.5
5 22.5 21.5
A B C
4 13.5 15.5 17.6
5 16.5 18.5 20.6
Technical data
Components 2001114 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Actuation/sense of rotationCase Number
of digits
Bz Bw Bz Bw
Surface 4 0 101 605 0 101 606* 0 101 607 0 101 6085 0 101 609 0 101 610 0 101 611* 0 101 612*
flush 4 0 103 605 0 103 606 0 103 607 0 103 6085 – – – –
Surface 4 0 101 505 0 101 506 0 101 507 0 101 5085 0 101 613 0 101 614* 0 101 615* 0 101 616
flush 4 0 103 505 0 103 506 0 103 507 0 103 508
Types 101/103301/309
ORDER INFORMATIONRevolution Counters
Ratio
1:1
1:10
DIMENSIONSTyp 103/309 flush mounting case
4 digits 26 mm
Dimensions in mm
Stroke Counter Actuation/sense of rotationCase Number
of digits
Bz Bw Bz Bw
Surface 4 0 301 505 0 301 506 0 301 507 0 301 5085 0 301 509 0 301 510 0 301 511 0 301 512
flush 4 0 309 505* 0 309 506* 0 309 507* 0 309 508*5 0 309 509 0 309 510* 0 309 511* 0 309 512*
without 4 0 301 401* – – –5 0 301 405* – 0 301 407* 0 301 408*
Stroke lever 0 600 007For further stroke levers see accessories
* on requestInquire for other versions
5 digits 24 mm
tico e007
115Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
4 or 5-digit display With button reset Miniature size Protection class IP 50
TECHNICAL DATA
Revolution and Stroke Counterswith Button Reset
Actuation Sense 4-digit, transmission ratio 5-digit, transmission ratioof rotation 1:1 1:10 1:1 1:10
Bz 0 125 101 0 125 111 0 125 105 0 125 115 Bw 0 125 102 0 125 112 0 125 106 0 125 116 Bz 0 125 103 0 125 113 0 125 107 0 125 117 Bw 0 125 104 0 125 114 0 125 108 0 125 118 Bz 0 125 301 – 0 125 305 – Bw 0 125 302 – 0 125 306 – Bz 0 125 303 – 0 125 307 – Bw 0 125 304 – 0 125 308 –
Stroke lever Ordering code 0 600 026 Other stroke levers available on request
Display 4 or 5-digit, depending on versionDigit height 4 mmBase plate burnished sheet steelCase plastic, (PPO), glassfibre-reinforced, blackCover plastic (ASB) grey, (on request also available in black)Weight approx. 50 gCounting mode revolution counter: + (-), stroke counter: +Transmission ratio 1:1 or 1:10, depending on versionMax. speed 1.500 rpm, with transmission 1:10 500 rpm
(revolution counter only)Switching distance min. 18° (only stroke counter)Max. stroke rate 500 strokes/min (stroke counter only)Reset manual reset with button Don’t push the reset pushbutton during the process
ORDER INFORMATION
Revolution counter
Stroke counter
DIMENSIONS
Dimensions in mm
Type 125
Components 2001116 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 125 Hand Tally
4-digit display Button reset Rugged, easy to operate Maintenance-free operation
TECHNICAL DATA Display 4-digitDigit height 4 mmMounting wall-mounted, magnetic attaching plate availableCover plastic (ASB) greyBaseplate sheet steel, burnishedWeight approx. 70 gCounting mode adding, 1 stroke = 1 incrementReset manual with button Don’t push the reset pushbutton during the process
ORDER INFORMATION Counter Ordering code 0 125 342Accessory stroke lever Ordering code 0 600 065Magnetic attaching plate Ordering code 1 125 009
DIMENSIONS
Dimensions in mm
117Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Approved for calibration applications by the PTB (German Federal Institute for Physics and Technology)
With button reset 6-digit display Protection class IP 50
Revolution, Length,Stroke Counters
TECHNICAL DATA Display 6-digitDigit height 4 mmCase plastic, (PA), glassfibre-reinforced, blackCover plastic (ASB), greyWeight approx. 70 gCounting mode + (-), stroke counter: +Transmission ratio 1:1, 1:2 or 1:10, depending on versionMax. speed revolution counter: 3000 rpm, length counter 1500 rpmMax. stroke rate 500 strokes/min (stroke counter only)Torque approx. 0.2 Ncm, stroke counter: approx. 5 NcmActuating travel min. 37° max. 43° (stroke counter only)Reset - with button, tactile touch 12 N
- key reset available on request Don’t push the reset pushbutton during the process
Dimensions in mm
DIMENSIONS
A BStroke counter 5 mm 10 mm left or rightRevolution and length counter 4 mm 20 mm on both sides
ORDER INFORMATION Actu- Sense of Indica- Unit Transm. ratio Transm. ratio Transm. ratioation rotation tion 1:1 1:2 1:10
Ordering code Ordering code Ordering code
Bz 999 999 0 150 101 – 0 150 103 Bw 999 999 0 150 102 – 0 150 104 Bz 99 999.9 m/dm – 0 150 201 – Bw 99 999.9 m/dm – 0 150 202 – Bz 999 999 0 150 301 – – Bw 999 999 0 150 302 – – Bz 999 999 0 150 303 – – Bw 999 999 0 150 304 – –
Stroke lever 0 600 003 For further stroke levers see accessoriesProtective cover Ordering code 2 150 056*
* on requestFor measuring wheels see accessories. Inquire for other versions.
Revolution counter
Length counter
Stroke counter
Type 150
Components 2001118 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 205 Length Counter with Key Reset
7-digit display Large 8 mm digits With key reset Protection class IP 53
TECHNICAL DATA Display 7-digit (999999.9 m/dm)Digit height 8 mmProtection class (DIN 4050) IP 53Case die-cast zinc, blackCover plastic (ASB), greyWeight approx. 430 gCounting mode + (-) adding in specified direction, subtracting in reverseTransmission ratio 1:2, 1:5 or 1:10, depending on versionMax. speed 3000 digits/minTorque 0.5 NcmReset manual reset with removable key on either side Don’t push the reset pushbutton during the process
Dimensions in mm
DIMENSIONS
ORDER INFORMATION Actuation Sense of rotation Transmission Transmission Transmissionratio 1:2 ratio 1:5 ratio 1:10
Bz 0 205 003 0 205 001 0 205 005 Bw 0 205 004 0 205 002 0 205 006
Inquire for other versionsFor measuring wheels see accessories
119Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
7-digit display Large 8 mm digits With key reset Protection class IP 53
TECHNICAL DATA
Stroke Counter with Key Reset
Display 7-digitDigit height 8 mmProtection class (DIN 4050) IP 53Case die-cast zinc, blackCover plastic (ASB), greyWeight approx. 430 gCounting mode + adding in specified directionTransmission ratio 1:1Max. stroke rate 500 strokes/minTorque 8.6 NcmActuation angle BZ: min. 28°, max. 37°; BW: min. 33° 30', max. 38° 30'Reset manual reset with removable key on either side Don’t push the reset pushbutton during the process
DIMENSIONS
Dimensions in mm
128
Actuation Sense of rotation Ordering code
Bz 0 312 001 Bw 0 312 002
Stroke lever ordering code 0 600 005For other stroke lever see accessories
Inquire for other versions
ORDER INFORMATION
Type 312
Components 2001120 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 225 Revolution, Length, Stroke Counters
TECHNICAL DATA
Approved for length countingby the PTB (German Federal Insti-tute für Physics andTechnology)
6-digit display Large digits, 6.5 mm high Button reset
Counter with suspension device Adjustable counterweight 6-digit display m/dm or m/cm Button reset
Display 6-digitDigit height 6.5 mmBase plate burnished sheet steelCase die-cast metalCover plastic (ASB), greyWeight approx. 750 g
Counter with suspension device and downward weightapprox. 2.400 kp. Downward weight can be shifted in order toregulate contact pressure
Counting mode + (-), stroke counter: +Transmission ratio 1:1, length counter 1:5 or 1:50Max. speed 10000 digits/min, stroke counter 800 strokes/minTorque 1.2 Ncm, stroke counter 8.0 NcmActuating angle min. 38°, max. 55° (stroke counter only)Reset button reset, secured against unauthorized operation Don’t push the reset pushbutton during the process
Dimensions in mm
DIMENSIONS
tico 007
121Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Dimensions in mm
DIMENSIONSCounter with suspension device
Actu- Sense of Indication Trans. ratio Trans. ratio1:5 Trans. ratio 1:50ation rotation Unit 1:1
Ord. code Ord. code Unit Ord. code Unit
Bz 999 999 0 225 001 – – Bw 999 999 0 225 002 – – U 999 999 0 225 101* – – G 999 999 0 225 102* – – U 999 999 0 225 201* – – G 999 999 0 225 202* – – Bz 99 999.9 m/dm – 0 225 003 m/dm 0 225 007 m/cm Bw 99 999.9 m/dm – 0 225 004 m/dm 0 225 008 m/cm Bz 99 999.9 m/dm – 0 225 501 m/dm 0 225 505 m/cm Bw 99 999.9 m/dm – 0 225 502 m/dm 0 225 506 m/cm Bz 999 999 0 225 301 – – Bw 999 999 0 225 302 – –
Stroke lever Ordering code 0 600 005 For other stroke levers see accessoriesPanel frame Ordering code 1 250 056 See accessories for description
* on requestFor measuring wheel see accessories, they are not included in normal delivery
ORDER INFORMATION
Revolution counter
Length counter
Length counter with suspension device
Stroke counter
Type 225
Colibri 490
Components 2001122 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 007
Contactless counting Miniature size Simple installation Protection class IP 66 Maintenance-free operation
With Magnetic Actuator
MAGNETIC ACTUATION
Actuation is effected by a magnetic field. With suitable magnets it is possible toachieve actuating distances of up to 50 mm. The direction of approach of the actua-ting magnet is not critical. When choosing a counter, it is important to observe the correct polarity of the actuator (see Figure).
ACTUATING MAGNETS We supply suitable magnets for actua-ting this counter. The magnet core con-sists of barium iron (hard ferrite 22/17acc. to DIN 17 410). For attachment(centre hole) only screws made of non-magnetic material may be used.
DIMENSIONS OF ACTUATING MAGNETS
Ordering code D d H
3 532 023 15.2 mm 3.2 mm 6 mm3 532 024 31.0 mm 5.3 mm 15 mm
Fe = Iron (magnet incounter)
ATTACHMENT
ZOB = Counter without attachment plateZBO = Counter with attachment plate top
ZBL = Counter with attachment plate left ZBH = Counter with attachment platebehind
S Fe
ZBL Hose clamp mountingZBH
N
S = Permanent magnetSouth pole
N = Permanent magnetNorth pole
"Colibri" is available for several means of attachment:
N
Actuatingmagnet
ZBO
123Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TECHNICAL DATA Display 6-digitDigit height 4 mm, visualOperating temperature - 10 ... + 50 °CStorage temperature - 40 ... + 60 °CMounting depending on versionMounting position anyProtection class (DIN 4050) IP 65Vibrostability 20 m/s2 (10...150 Hz) acc. to IEC 068-2-6Shock stability 2.000 m/s2 (3 ms) acc. to IEC 068-2-27Maintenance-free operation 10 million incrementsCase MakrolonWeight approx. 12 gCounting mode addingActuation with conventional permanent magnetsActuating distance Fe-version 0.5 mm
N and S magnets see order informationResponse flux density > 10 mT (100 Gauss)Release flux density < 4 mT (40 Gauss)Actuating speed 2 m/sCounting frequency max. 20 digits/sReset none
DIMENSIONS
Dimensions in mm
ORDER INFORMATION
Actuating magnets (North pole)
Ordering code Ordering code Ordering code
Counter without North pole South pole Feattachment accessories 0 490 001 0 490 002 0 490 003Attachment plates ZBO ZBL ZBH
2 490 011 2 490 012 2 490 005Hose clamps 20 … 32 mm 25 … 40 mm 40 … 60 mm
3 515 055 3 515 050* 3 515 057
Distance 10 mm Distance 30 mm Magnetic plate 6 mm3 532 023 3 532 024 3 532 025
* on request
Colibri 490
Components 2001124 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Notes
125Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Preset Counters
Pres
etCo
unte
rs
Typical applications:
Control of order-related quantities
Simple length cutting controlwith e.g. cable, fibre, threador wire
Length cutting with fast andslow travel
Dosage and filling Coarse/fine dosage rates Lift or curtain control Coil winding control
Production process controlwith batch counter
PTB approved length control Job data collection over
interfaces Decentralised counting for
PLC and PC applications, withintegrated display
Maintenance interval control
Preset counters are counting devices with control functions. Many dif-ferent applications can be handled using the various versions whichare available. Depending on your requirements, you can choose fromelectronic, electro-mechanical, pneumatic or mechanical models.
Most of the electronic preset counters have two presets and, using aninitial switching point, they can control fast/slow positioning orcoarse/fine dosage rates, for instance
Components 2001126 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlFrequencyPrescaling factorReset inputControl inputs
Count ModeAdd Mode orSubtracting ModeDifference ModeCount Direction ModeAdd/Add ModePhase DiscriminatorOutput
Page
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Offering a largevariety of programma-ble functions
Without preset orwith 1 or 2 presets
Freely selectable pres-caling function
Programmable keyboard lock
Integrated totalizingcounter
48 x 48 x 93.545 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPN5 kHz / 30 Hz0.001-999.999PNP/NPN2nd counter input andgate input
Programmable
ProgrammableProgrammableProgrammableProgrammableWithout, or with 1 or 2 relays and transistor outputs
131
Preset counter withlarge, 8-digit LCD display; illuminated
Voltage supply viaexchangeable lithiumcells
Small mounting depth SSR output Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 3668 x 33LCD 8-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPN10 kHz / 30 Hz0.0001-99.9999NPNKeyboard lock
Programmable
OptionalProgrammable
OptionalSSR output, with optional moduleas relay output
134
Large dual-colour, 5-digit LED display;digit height 18.5 mm
1 or 2 presets Programmable display
colour Upgrading options
(e.g. RS 485) Service-friendly due
to plug-in system Complete functions
due to 8 counter versions and 5 processindicators
96 x 48 x 10092 x 45LED 5 digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC
PNP/NPN10 kHz / 200 Hz / 20 Hz0.0001-9.9999NPNKeyboard lock
Programmable
ProgrammableProgrammableProgrammableProgrammableOptional with 1 or 2 relays and transistor outputs
137
Preset counter with 5-digit LED display
Keyboard foil Correction value Prescaling factor from
0.001-9.999 with PNPoutput for totalizingcounter
Service-friendly dueto plug-in screw ter-minals
Suitable for a varietyof applications due tocontrol input andmany different versi-ons
Keyboard lock
48 x 48 x 10845 x 45LED 5-digit, 7 mm
IP 5412-24 VDC, 24 VAC100-240 VAC versions
PNP/NPN5 kHz / 30 Hz0.001-9.999PNP/NPNKeylock, Gate, DisplayHold or Up/Down input
Programmable
Optional
With 1 or 2 relays ortransistor outputs
140
Type tico 732 tico 734 / 007 tico 735P7/P8 signo 721
127Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlFrequencyPrescaling factorReset inputControl inputs
Count ModeAdd ModeDifference ModeCount Direction ModeAdd/Add ModePhase Discriminator
Output
Page
Large 6-digit LED display
Voltage supply 12-24 VDC or 115/230 VAC
Connections via plug-in screw terminals
Very high countingfrequency up to 40 kHz
2 Presets (as relay andtransistor); one presetis programmable as atrailing preset
Reproducible, freelyselectable set value
Optional with RS 232or RS 485 interface
96 x 48 x 10892 x 45LED 6-digit, 14 mm
IP 5412-24 VDC; 115/230 VAC versions
PNP/NPN40 kHz / 30 Hz0.0000-99.9999PNP/NPNGate input, display holdand keylock input
ProgrammableProgrammable
1-,2-,4fold programmable2 preset outputs (relay and transistor)
143
Large 6-digit LCD display with permanently visiblepresets
Voltage supply 12-24 VDC or 100-240 VAC
Connections via plug-in screw terminal
Counting frequencyup to 10 kHz
2 presets (relay andtransistor)
With batch counterand batch preset
Optional with totalizing counter
Optional with RS 485interface Profibus orSuconet
72 x 72 x 10868 x 68LCD 6-digit, 13 mm2xLCD 6-digit, 6 mmIP 6512-24 VDC; 24 VAC; 100-240 VAC versions
PNP10 kHz / 30 Hz0.0005-99.9999PNPGate input, display holdbuffer and keylock input
ProgrammableProgrammable
1-,2-,4-fold programmable2 presets (relay andtransistor), batch preset (transistor)
151
Large 7-digit LED dis-play with permanentlyvisible presets
Voltage supply 12-24 VDC or 100-240 VAC
Connections via plug-in screw terminals
Counting frequencyup to 20 kHz
2 presets Trail output With batch counter
and batch preset Reproducible, freely
selectable set value Programmable out-
puts and operatingmodes
Optional with RS 485 or RS 232 interface
144 x 72 x 108138 x 68LED 7-digit, 14 mm2xLED 6-digit, 7 mmIP 6412-24 VDC; 24 VAC; 100-240 VAC versions
PNP20 kHz, 5 kHz, 30 Hz0.0001-99.9999PNPGate input, display buffer inputRes+Out and keylockinput
ProgrammableProgrammable
1-,2-,4-fold programmable3 presets (relay and transistor), batch preset, direction output (transistor)
157
Large 7-digit LED dis-play with permanentlyvisible presets
Voltage supply 12-24 VDC or 100-240 VAC
Connections via plug-in screw terminals
Monitoring of 5 shiftswith totalizing counter
Integrated operatinghour meterand tachometer
2 presets (relay andtransistor)
144 x 72 x 108138 x 68LED 7-digit, 14 mmLED 6-digit, 7 mmIP 6412-24 VDC; 24 VAC;100-240 VAC versions
PNP1 kHz, 30 Hz0.0001-99.9999PNPGate input, Res+Outinput, shift reset andkeylock input
ProgrammableProgrammable
1-,2-,4-fold programmable2 presets (relay andtransistor)
165
Type signo 723.1 signo 723.5 signo 724 signo 724-S
Components 2001128 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlFrequencyReset inputControl inputsCounting modeAdd ModeOutput
Accessories
Panel frame dimensions (mm)Panel frame cutout (mm)
Page
Single-channel presetcounter
6-digit LED display Adding or subtracting
counting direction Relay or transistor
outputs Preset input via
10-key keypad Plugs into modular
system 400
50 x 50 x 95.550 x 50LED 6-digit, 7 mm
IP 5412-24 VDC; 24, 115 or 230 VAC via power supply module
PNP/NPN5 kHz / 30 HzPNP or NPN
Standard
1 preset (relay or transistor version)Panel frame, connection box, power supplies60 x 75 x 88
55 x 29 x 55
169
Repeating module; 1preset
3-digit preset key forsimple entry
LED indicators forinput and output signals
Relay or transistoroutputs
Plugs into modularsystem 400
50 x 50 x 95.550 x 502 LED indicators3 preset keysIP 3012-24 VDC, 24, 115 or 230 VAC via power supply module
PNP or NPN5 kHz / 30 HzPNP
Standard
1 preset (relay or transistor version)Panel frame, connection box, power supplies60 x 75 x 88
55 x 29 x 55
172
Type Type 711 Type 781.4
129Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
Digit heightProtectionPulse voltage
Power consumptionReset
Operating temperatureDuty cycleAccessories
Dimensions (mm) (with panel frame)Panel frame cutout (mm)
Page
Adding preset counter Display 3-digit or
5-digit with perma-nently visible presets
Manual, electrical, orautomatic reset
Plugs into modularsystem 400
Easy to service
50 x 50 x 92.5
50 x 503; 5, depending on version 4 mmIP 3024 VDC, 24 VAC,115 VAC, 230 VACDC 2.5 W; AC 2.75 VAManual, electrical -depending on version;optional: automatic reset- 10…50 °C100 % at 25 °CPanel frame, connectionbox, reset automaticmodule100 % duty cycle module60 x 75 x 88
55 x 55
174
Adding preset counter Display 3-digit or
5-digit with perma-nently visible presets
Manual, electrical, orautomatic reset
Available with diffe-rent front panel sizes
Compact design
60 x 75 x 72.555 x 53.2 x 72.552 x 523; 5, depending on version 4 mmIP 3024 VDC, 24 VAC,115 VAC, 230 VACDC 2.5 W; AC 2.75 VAManual, electrical -depending on version
- 10…50 °C100 % at 25 °C
176
Subtracting presetcounter
Display 3-digit or 5-digit with perma-nently visible presets
Manual, electrical, orautomatic reset
Plugs into modularsystem 400
Easy to service
50 x 50 x 92.5
50 x 503; 5, depending on version 4 mmIP 3024 VDC, 24 VAC, 115 VAC, 230 VACDC 2.5 W; AC 2.75 VAManual, electrical -depending on versionoptional: automatic reset- 10…50 °C100 % at 25 °CPanel frame, connectionbox, reset automaticmodule100 % duty cycle module60 x 75 x 88
55 x 55
178
Electromechanical Preset Counters
Type Type 486–487 Type 886–887 Type 446 / 447
Components 2001130 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Features
Technical DataDimensions (mm)(Width x Height x Depth)DigitsDigit heightProtectionReset
Drive
Torque/Actuating distanceMax. speedMax. no. of strokesTransmission ratioMountingAccessories
Page
5-digit indication, revolution, length andstroke counter
Subtracting countingdirection
Large stroke keys forpreset input
Pushbutton reset Large digits, 6.5 mm
132 x 70 x 74.256.5 mmIP 40; connections IP00Manual reset via reset keyBoth sides, front, back, bottom1.2 NcmStroke counter 8 Ncm10.000 digits/min.800 strokes/min.1:1 / 1:5 / 2:1 / 5:1BaseplateStroke levers, measuring wheels
180
Mechanical Preset Counters
Type Type 250
131Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 007Multifunctional Counter -Bi-directional
high-contrast LED or LCD-Display, 6 digits small and compact DIN dimensions 48 x 48 mm easy operation by one key per digit direct access to parameters available with 1 or 2 presets transistor and relay with changeover contact, for each preset with integrated separate totalizer 5 basic functions easily programmable: counter, tachometer, time counter,
shift counter and batch counter display range from – 99999 to 999999
F1 F2 PSC PRG F1 F2 PSC PRG
F1 PRG PRGF2 PRGPSC
Reset
R 46
E
E
E
5 E 6
E
E
E
32E
E
1E
count mode
programming mode
and POWER ON and POWER ON
> 5 sec
preset 1 preset 2 prescaler function-parameter e.g. Basic-function*
count modedecimalpointreset/set-modesignal lengthpnp/npn-selectionreset modeoutput memorytime counter-tachometerkeylock for:manual resetpreset 1 or 2prescaler
* only formultifunction version
countertachometertime countershift counterbatch counter
PROGRAMMING
The important values, preset 1, preset 2, prescaler and separate totalizer can bedirectly selected. It is necessary only to press the relevant button and the E-buttontogether. To make the operation still more easy, access to those values can be lockedseparately.
All other system parameters like operation and count modes are laid down in a com-mon operation level. These parameters are usually programmed once only during thefirst initiation.
tico 732
Components 2001132 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TECHNICAL DATA
General
Counter
Tacho
Time-counter
Display LED or LCD, 6 digits, leading zero suppression, decimal pointDigit height LED 7.6 mm; LCD 9 mmSupply voltage 12...24 VDC; 24 VAC; 115 VAC; 230 VAC; 50/60 Hz, depending
on versionCurrent consumption 12...24 VDC < 150 mA
100/115/230 VAC < 50 mA; including sensor supplySensor supply only when AC operated: 12 ... 30 VDC, max 50 mAData retention non-volatile memory > 10 yearsOperating temperature 0 ... +50 °CStorage temperature - 20 ... + 70 °CElectrical connection screw terminalsMounting with clamping frameProtection class (IEC 144) front side IP 65, terminals IP 20Vibrostability 10 m/s2 (10...150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General design according to VDE 0411, DIN 57411, protection class IIApprovals UL + CUL E 96337Amplitude thresholds < 2 V and > 8 V, max 40 VDCActive edge programmable; positive with pnp input; negative with npn inputPulse shape any (squarewave 1:1 for max. frequency)Input resistance approx. 5 kOhm (static)Counting frequency max. 5 kHz (2.5 kHz bi-directional)Prescaler programmable from 0.001 to 9.999 (999.999)Count inputs A, B - phase discriminator with single evaluation
- differential mode (add/sub)- count direction mode- totalizing mode (add/add)
Pulse length min. 17 ms (30 Hz), 100 µs (5 kHz)Control input C - manual reset possible
- external reset, static or dynamic, programmable,pulse length > 5 ms
- automatic reset when main preset has been reached (programmable)
Relay changeover contact max. 250 VAC / 30 VDC, min. 5 V AC/DCmax. 1 A, min. 10 mA, delay < 5 ms
Transistor pnp output 12...24 VDC max 10 mA of DC-supply; 12…30 VDCmax. 10 mA of AC-supply
Method time interval (1/Tau)Display range 1/min or 1/secMin input frequency 0.125 Hz = 8 secAlarms 2 alarms with programmable start-up-suppressionTime bases programmable; sec, min., h or hh.mm.ssResolution programmable 1; 0.1; 0.01; 0.001Function single pulse measurement (short time meter) or cumulated
counting (hour meter)Count mode pulse width or period measurement (start-stop)
DIMENSIONS
tico 732
Dimensions in mm
clamping frameplug terminal
133Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Display Preset 12–24 VDC 24 VAC 115 VAC 230 VAC
LCD – 0 732 000 0 732 071 0 732 037 0 732 001LCD 1 0 732 002 0 732 073 0 732 031 0 732 003LCD 2 0 732 012 0 732 078 0 732 049 0 732 013LED – 0 732 018 0 732 080 0 732 055 0 732 019LED 1 0 732 020 0 732 0821 0 732 057 0 732 021LED 2 0 732 030 0 732 087 0 732 067 0 732 031
Important: Only versions with 2 presets or without preset can be used as tachometers.
ORDER INFORMATION
Display
LCD
LED
Function
Tacho
Time counter +totalizer
Shift counter*
Batch counter*
no output
1 output(1 relay,1 transistor
2 outputs(2 relays,2 transistors)
12 - 24 VDC
230 VAC
Outputs Power supply
Counter +totalizier
100 VAC
115 VAC
DIMENSIONS
POSSIBLE VARIANTS
tico 732
For versions with no output, pins 7–9 and 15-17 are not connected.
VDC 1 Rel/1 Trans
VDC 2 Rel/2 Trans
VAC 1 Rel/1 Trans
VAC 2 Rel/2 Trans
Components 2001134 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
LCD display, 8 digits, 12 mm height, excellent contrast through Backlighting with a 10-28 VDC supply Lithium battery power supply Decimal point, input scaling, count direction, output mode, etc. programmable,
depending on model Programming reduced to a minimum for easy handling and set-up CE approval, IP 65, NEMA 4 Suitable for TTL Mounting depth 29 mm
MODEL OVERVIEW
Flexible Counter Seriesin DIN size 36 x 72 mm
The family tico 734 consists of ten models:
0 734 000 Totalizer without scaling0 734 001 Add/Subtract totalizer0 734 002 Position indicator0 734 003 Tachometer0 734 004 Programmable rate meter0 734 005 Rate meter with totalizer0 734 006 Time counter0 734 007 Preset counter0 734 008 Time preset counter0 734 009 Rate meter 005; with total and pulsed output
tico 734
4 Remote reset, NPN3 Input A, 30 Hz, NPN2 Input A, 10 kHz, PNP1 0V, Gnd5 Program enable6-7 Output SSR (Form A)8 DC-supply for backlighting
Suitable option modules: 1 734 010 … 020
Preset Counter (0 734 007)7 digit, programmable for up or downcounting, SSR relay output, preset lockfunction, reset key can be enabled/disa-bled
135Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 007
Internal Single or dual lithium 3 V battery (CR 1/2 AA), typical lifetime of 5 years (10 yrs w/2 batteries). „Lo BAT“ display flashes approximately 2 weeks prior to end of battery life.
via Option Module 120/240 VAC provides 12 VDC for display backlighting Display LCD, 12 mm height, 8 digits Backlighting Whole display area can be backlit with a 10-28 VDC supply,
green-yellow colourHigh Speed Input (2) PNP, ≤ 28 VDC, max. 10 kHz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impulse > 45 µs, impedance 1 MΩLow Speed Input (3) NPN, ≤ 28 VDC, max. 30 Hz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impedance 1 MΩHigh Voltage Option 100..260 VAC/DC, 30 Hz, 1 MΩ, with internal Module connection to input (3)Low Voltage Option 5…30 VAC/DC, 30 Hz, 17 kOhm, with internal connection Module to input (3)Enable Input (5) NPN, ≤ 28 VDC, level sensitiveReset Input (4) NPN, ≤ 28 VDC, edge triggered, max. 30 Hz (50 % duty cycle)SSR Relay Photo mos relay, 0.1 A, 30 VAC/DC, reaction time < 5 msRelay Option Module Changeover contact 5 A, 120/240 VAC or 30 VDCMounting Front panel mounting with mounting bracketDimensions DIN 36 x 72 mm, 36 mm total depth, total width 83 mmPanel Cutout 33+0,3 mm x 68+0,3 mm, depth behind panel < 29 mmPanel Thickness max. 8 mmFront Panel Rating IP 65Operating and Storage 0 °C to + 55 °CTemperature - 20 °C to + 60 °CGeneral DIN EN 61010 part 1 / VDE 0411 part 1
Protection according to class II, Contamination level 2 Overvoltage category II
Technical data tico 734
Control Inputs
Output
Physical
Environmental
Count Inputs
Display
Power Supply
DIMENSIONS
A: gasket, B: mounting bracketincl. option modul
Dimensions in mm
1) Panel cutout: 33 x 68 mm2) Panel thickness: max 8 mm
Components 2001136 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
FUNCTIONS OVERVIEW
tico 734 Technical data
Power 115 VAC or 230 VAC (see wiring), frequency 50/60 Hz. Terminal (8) provides Supply (E-H) an unregulated 10-20 VDC supply for powering sensors up to 50 mARelay Type: SPDT (Form C) mechanical relay; Operate Time: 6 msOutput 5A, 120/240 VAC or 30 VDC, silver alloy(A-B-J) Electrical Life: > 500 000 operations, Mechanical Life: > 10 million operationsHigh Voltage Range: 100 to 260 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 200 kOhmLow Voltage Range: 5 to 30 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 127 kOhmMounting Attaching on back of instrumentDimensions 42 x 69 mm, depth 58 mm, total depth behind panel with instrument 82 mmTemperature Operating: -0° C to +50° C; Storage -20° C to +60° C;General DIN EN 61010 part 1, Protection according to class II
Contamination level 2; Overvoltage category II
OPTION MODULES
With the Option Modules, the tico 734 can be functionally extended and adaptedto special application conditions. The following option functions are available: AC power supply providing sensor supply 10-20 VDC / 50 mA and 12 V supply
for display backlighting (supports the battery in models with SSR output) Relay output, changeover contact, 5 A, 120/240 VAC or 30 VDC High voltage input (100..260 VAC/DC, max. 30 Hz, 200 KΩ)
Connections 010 011 012 013 014 015 016 017 018 019 020
High Voltage Input C-D x x x xRelay 1 x change over A-B-J x x x x x x AC power Supply E-F, G-H x x x x x xLow Voltage Input C-D x x x x
1734 …
TECHNICAL DATA
WIRING
ORDERING INFORMATION Panel Instruments
Totalizer 0 734 000Add/Subtract Totalizer 0 734 001Position Indicator 0 734 002Tachometer 0 734 003Programmable Rate Meter 0 734 004Rate Meter with Totalizer 0 734 005Elapsed Time Indicator 0 734 006Preset Counter 0 734 007Preset Timer 0 734 008Rate Meter with Total 0 734 009and Pulsed OutputLithiumbattery E3533 355
Option Modules
HV Input 1 734 010Relay 1 734 011AC Power 1 734 012HV Input and Relay 1 734 013HV Input and Power 1 734 014Power and Relay 1 734 015HV Input/Power/Relay 1 734 016LV Input 1 734 017LV Input and Relay 1 734 018LV Input and Power 1 734 019LV Input/Power/Relay 1 734 020
All modules contain 17 terminals. Theexact functions that are present aredetermined by the model of instrumentand option module (see Functions Over-view).1-8 Connection to instrument
(refer to appropriate operatinginstructions)
A Normally Open Relay ContactB Relay CommonJ Normally Closed Relay
ContactC-D High or Low Voltage Input, no
polarity, (provides NPN signal on terminal 3)
E-F 115 VAC Line winding IG-H 115 VAC Line winding II
137Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Flexible Counter Series, DualColour Display in DIN size 48 x 96 mm
Input Modes, Features Value Range
A+B, A-B, Direction, Quad 0...999991 or 2 Presets (P 1 as absolute Preset or Prewarn) 0...99999Up/down with or without auto reset mode 0 -> P 2, P 2 -> 0Out 1 and Out 2 separetely programmable latch or 0.01...99.99 Sec
A+B, A-B, Direction, Quad 0...99999Up/down with or without auto reset mode 0 -> P 1, P 1 -> 0Preset, Batch Preset, Totalizer 0...99999Out 1 and Out 2 separately programmable latch or 0.01...99.99 Sec
tico 735
COUNTING - MEASURING - INDICATING - MONITORING - TRANSMITTING
Because of the unlimited number of measurements it can handle, the tico 735 devicefamily is equally well suited to applications in the world of impulse and time coun-ting as to those in the processing area.
If you are looking for display clarity and high levels of accuracy, then the tico 735is the right choice for you. The dual-colour display is unique, highlighting an alarmsituation or an excess value at a single glance. You can programs your own choiceof display colour to indicate normal or alarm conditions.
FEATURES Brilliant 18.5 mm high dual-colour red/green LED display with programmablecolour settings
As standard, all models have limit or preset values Scaling available as standard Universal Power Supply 90...264 V AC or 20...50 V AC/DC Simple structured operation with switchable help function
External Program Lockout DIN housing 48 x 96 mm, mounting depth < 100 mm Conveniently sized Screw Terminals Large keys offer safety and ease of operation
NPN and Relay Outputs Option: RS 485 ASCII protocol serial interface for all versions. ”Remote Display”
version receives process values over RS 485
PRESET COUNTER (1 Preset, 2 Presets)
BATCH COUNTER
Components 2001138 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONS
Technical data
DISPLAY AND KEYBOARD
PHYSICAL
OPERATING CONDITIONS
APPROVALS
OPTION: RS 485
Primary Display Red/Green, 7 segment LED, 5 digits, height 18.5 mmSecondary Display single digit 7 segment LED, height 7 mm, red/greenOutput Indicators 2 red LEDs for OUT 1 and OUT 2 statusKeyboard 4 rubber keys for programming and manual reset
Front Dimensions DIN 48 mm x 96 mm, 110 mm total depthMounting Front panel mounting (mounting bracket supplied)Panel Cutout 45 mm x 92 mm, panel thickness max 12 mmConstruction Front carrier with PCBs can be pulled outTerminals Screw Type (combination head)
Power Supply 90 - 264 V AC 50/60 Hz (electrically separated from all inputs and outputs) or 20...50 V AC / 22...55 V DC
Temperature Operation: 0 °C to +55 °C (32 °F to 131 °F)Storage: -20 °C to +60 °C (-4 °F to 176 °F)
Relative Humidity 0 to 90 %, non-condensing
Protection Frontpanel IP 66CE EN 50082-1/92-95; EN 50081-1/92, -2/94Safety DIN EN 61010 part 1; protection according to class IIGeneral UL, CUL, Overvoltage cat. II, Contamination level 2
Type RS 485, serial asynchronous, Open ASCII, Master-Slave, up to 99 zones
Parameters 9600...1200 Bd, 1 start, 7 data, 1 stop, even parity
tico 735
10096
48
tico 735
PGM RST
Dimensions in mm
139Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 735
ORDERING DATA
129 8 7 6 5 4 3
10
11
12
13 14 15 16 17 18 19 20 21
22
23
24
RS 485B A + 0V Relay OUT1
LinearOutput
+
-
0V
OU
T1N
PN
CTRL
1
CTRL
2
Aux.
Pow
er
0V
Inpu
t A
Inpu
t B
OU
T2N
PN
NC
RelayOUT2
NC
~ ~90-264 VAC
22-50 VDC/ACor
TERMINALS
SPECIAL FEATURES
CONTROL INPUTS
OUTPUTS
COUNT INPUTS Active Edge NPN or PNP programmable; capable of TTL; 30 V DC maxwith PNP High ≥ 3.0 V, Low < 2.0 V or open; 10 kOhm to 0 Vwith NPN High ≥ 3.0 V or open, Low < 2.0 V; 4.7 kOhm to V+Frequency 20 Hz, 200 Hz or 10 kHz programmable
CTRL1 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+ (Reset or hold) edge sensitive; 25 ms min., max 30 V DCCTRL 2 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+(Progr. security)) level sensitive; 25 ms min.; max 30 V DC
OUT 1 NPN NPN, open collector; 30 V DC max; 100 mA maxOUT 2 NPN response time < 75 µsRelay 1, Changeover (Form C); 240 V AC / 3A or 110 V AC / 5 A; pull-in Relays 2 (opt.) time 8 msAuxiliary 9...15 (unregulated V DC), 125 mA max; residual ripple < 0.5 VPower Supply
Display colour programmable Count Calibrator 0.0001 to 9.9999 as standard Preset Lockout and Reset Disable programmable Program Security via CTRL 2
0 7 3 5 P
Type 0735 P
Function1 Totalizer2 Position Indicator4 Tacho/Rate Meter5 Rate + Totalizer6 Time Counter7 1 Preset Counter8 2 Preset Counter9 Batch Counter
Power Supply0 90…264 V AC2 20…50 V AC or
22…55 V DC
Output Relay 20 none1 with Relay 2
not for function1, 6, 7
Interfaces0 none5 with RS 485
Linear Output0 none3 with 4-20 mA
(only with function 2, 4, 5)
Option module Ordering codeRelay 2 1 901 001RS 485 interface 1 901 004
Components 2001140 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 721 Compact Preset Counter
1 or 2 presets Prescaler with output for connection of a totalizing counter Large, 5-digit LED display Connection by plug-in screw terminals Variety of programming possibilities Small, compact design in DIN dimensions 48 x 48 mm Keypad can be secured against unauthorized access Electronic value retention, environmentally sound, uses no batteries
DISPLAY 5-digit LED display with 7 mm high digits. Easy to read, decimal point can be pro-grammed if required.
Line 1: Shows the current count in counting operation and entry values in program-ming mode.
Line 2: Shows the operator the individual programming steps during programming.
Counter with one preset
PPreset
CORCorrection
Prescaler
Value input
VALUE INPUT
Values shown in the diagrams can beentered or modified with four large keyson the front of the counter.
P1Preset 1
P2Preset 2
CORCorrection
PSCPrescaler
Value input
Counter with two presets
Counter with gate and display memory Counter with up/down
ResetAuto-Reset On
seeKey 1 OffKey 2 Off
Key-Reset LockInput 5kHz
Display-Hold OffInhibit Offpnp-Input
0,05s1s
bist.
Out
9 8 7 6 5 4 3 2 1
SetOffOnOnOn30HzOnOnnpn
ResetAuto-Reset On
seeKey 1 OffKey 2 Off
Key-Reset LockInput 5kHz
pnp-Input
0,05s1s
bist.
Out
SetOffOnOnOn30Hz
npn
9 8 7 6 5 4 3 2 1
TableKeylock(Page 142)
TableKeylock(Page 142)
PROGRAMMING
The switch positions illustrated in the diagram program the counter as follows:
9 – Set mode (subtracting count)8 – With automatic repeat7 – Presets, correction value and6 – prescaler can be modified if "keylock" input is not actuated5 – Keypad reset activated4 – Max. counting frequency 5 kHz3 – Display memory Off without function2 – Gate to appl. input for u/d switch1 – pnp input logicPot – Signal duration OUT approx. 1 sec.
141Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Display 5-digit, LED, decimal point with soldering bridgeDigit height 7 mm Supply voltage Vop: 12 … 24 VDC – 5/+ 10 % or 24 VAC ± 10 % or
100 … 240 VAC, depending on versionCurrent consumption on 12 … 24 VDC < 300 mA, on 24 VAC < 255 mA,
on 100 … 240 VAC < 55 mA Sensor supply AC operation 24 VDC +– 10 %, DC operation Vop - 2 VValue retention approx. 10 years, NV memoryOperating temperature 0 … + 50 °C Storage temperature – 20 … + 70 °C Electrical connection plug-in screw terminalsProtection class (IEC 144) front IP 54; connections IP 20Interference immunity EMC severity 3 acc. to IEC 801 - pt. 2 + pt. 4Vibrostability 30 m/s2 (50 ... 500 Hz) acc. to IEC 068-2-6 Shock stability 100 m/s2 (10 ms) acc. to IEC 068-2-27 General design acc. to DIN VDE 0411; insulation group CWeight approx. 200 gApprovals CSA: LR 30208-12-13
InputsAmplitude thresholds < 2 V and > 8 V; max. + 40 VDC Active edge positive, can be switched to negativePulse shape random (squarewave 1:1 for max. frequency)Input resistance approx. 22 kΩCount input adding programmable, prescaler, adjustable
from 0.001...9.999Min. pulse length > 100 µs / > 17 ms (depending on counting frequency) Max. counting frequency 5 kHz / 30 Hz
Control inputsPulse shape PNP or NPN (able to switch over) Reset with static behaviour
- manual via keypad- electric, pulse length > 17 ms- automatic when OUT2 responds (only if programmed
accordingly)Keylock full keypad or only preset 1 (depending on program), static
behaviour, pulse length > 17 msApplication (Appl.) gate, up/down or display memory, depending on version
Signal must be applied 50 µs before count pulse
OutputsSignal outputs OUT1 and OUT2, depending on versionSignal duration OUT1: starts when P1 is reached and ends when OUT2 responds
OUT2: starts when P2 is reached from 0.05 s ... bistable (adjustable)
RelayContact type counter with 1 P: changeover; counter with 2 P: make contactMax. switching voltage max. 250 VAC or 30 VDCSwitching current max. 1 A, min. 100 mA on 20 VTransistor Switching voltage AC operation 24 VDC ,DC operation Vop -2 VSwitching current 20 mA Prescaler (PSC-OUT) Switching voltage AC operation 24 VDC ± 10 %, DC operation Vop -2 VSwitching current max. 10 mA Signal duration typ. 90 µs
TECHNICAL DATA
Technical data signo 721
Components 2001142 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 721 Technical data
Counter with 1 preset Counter with 2 presets
Keyl 1 Keyl 2 Keylock P COR PSC Keyl 1 Keyl 2 Keylock P1 P2 COR PSCsw. 7 sw. 6 term. 14 sw. 7 sw. 6 term. 14
off off low A A A off off low A A A Aoff off high A A L off off high L A A Lon off low A – A on off low A A – Aon off high L A L on off high L L A Loff on low A – L off on low A A – Loff on high A – L off on high L A – Lon on low A – L on on low A A – Lon on high L – L on on high L L – L
A = active, L = locked, – = masked
KEYLOCK
Dimensions in mm
CONNECTION DIAGRAM
NC = not connected
12345678
910111213141516
AC-DC supply voltageNCNCNC
OUT Relay ortransistor output
OV Sensor supply voltage+
InputResetAppl.KeylockPrescaler-OUTNC *
12345678
910111213141516
*
NCOUT1 Relay ortransistor output
NCOUT2 Relay ortransistor output
OV Sensor supply voltage+
InputResetAppl.KeylockPrescaler-OUTNC *
+– AC-DC supply voltage+
–
ORDER INFORMATION
Counter with 1 preset Counter with 2 presets
Counter with: Relay output Transistor outputFunction Supply 1 preset 2 presets 1 preset 2 presets
Ord. code Ord. code Ord. code Ord. code
Gate/display hold 12 … 24 VDC 0 721 101 0 721 105 0 721 103 0 721 107 24 VAC 0 721 109 0 721 110 ––– –––
100 … 240 VAC 0 721 102 0 721 106 0 721 104 0 721 108Up/down 12 … 24 VDC 0 721 121 0 721 125 ––– –––
100 … 240 VAC 0 721 122 0 721 126 ––– –––
Inquire for other versions
DIMENSIONS
Clamping frame
Plug connector terminal
143Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Large, 6-digit, 14 mm high LED display Up/down counter with prescaler 2 presets, one programmable as trailing preset Easy direct selection by 2 function keys 2 relay outputs with change-over contacts Keypad can be secured against unauthorized access npn/pnp-programming of inputs RS 232 / RS 485 interface optional
DISPLAY
Variable Preset Counter signo 723.1
6-digit LED display with 14 mm high figures, easy to read, decimal point can be programmed.
PROGRAMMING
Direct access with function-keys F1 and F2
Operation level 2 Operation level 3
P 1:Preselection 1
P 2:Preselection 2
SET: setvalue PSC: Prescaler
-,-,-,- Decimalpoint
systemparameters
Operation level 1
SET: set value
Section A Shows the actual counting position when in counting mode, andthe changeable parameters when in programming mode.
Section B: LED indicators showing the active output signal, and in program-ming mode indicating the changeable parameter.
Programming of signo 723.1 is divided into 3 operation levels and direct access.Direct access: Preselection 1 and 2 can be directly selected by the function
keys F1 and F2Operation level 1: Includes the set valueOperation level 2: Includes machine parameters and application specific
parameters.Operation level 3: Includes system parameters like operation modes and count
modes, which mormally are programmed during start-up pro-cedure.
Unauthorized programming of the signo 723.1 is prevented by a control input, whichcan lock the operation levels as well as the operation keys.
AB
signo 723P1P2SetPSC
Components 2001144 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 723.1 Technical data
Display LED, 6 digits, suppression of leadingzeros, programmable decimal point, minus sign
Digit Height 14 mm Power Supply Voltage Vop 12 … 24 VDC or 115/230 VAC depending on version Current Consumption 12 … 24 VDC < 250 mA,
115/230 VAC < 60 mASensor Supply AC-operation: 12 … 24 VDC, DC-operation: Vop - 2 V,
Imax. = 60 mA Data Retention non-volatile memory > 10 yearsOperating Temperature 0 … 50 °C Storage Temperature –20 … +70 °C Electrical Connection plug-in terminals Mounting with clamping frame Protection Class (IEC 144) front side IP 54, terminals IP 20Noise Immunity EMC severity 3 according to IEC 801, part 2 + part 4Vibrostability 10 m/s2 (10… 150 Hz) according to IEC 68-part 2-6Shock Stability 100 m/s2 (18 ms) according to IEC 68-part 2-27General Rating according to VDE 0411, DIN 57411, protection class II
Inputs:Switching Level <2 V and >8 V, max. 40 VDC Active Edge positive when pnp or
negative when npn, can be switched overPulse Shape any (square 1:1 at max. frequency)Input Resistance approx. 5 kΩ (static)
Count Input with prescaler programmable 0.0005 … 99.9999 – as phase discriminator input with single, double or
quadruple evaluation– as differential input – as up/down input
Pulse Duration 12.5 µs (40 kHz), 17 ms (30 Hz) Count Frequency max. 40 kHz or 30 Hz
Control Input: Reset – manual by reset key
– external by reset input, static or dynamic, programmablepulse duration min. 3 ms (attenuated min. 17 ms)
– automatic when reaching preset 2 Gate static, pulse duration > 12 µs / >17 ms Hold static, pulse duration > 3 msKeylock static, pulse duration >3 ms
Outputs:Relay Out 1 and 0ut 2 Contact Type changeover relaySwitching Voltage max. 250 VAC / 30 VDC , min. 5 VAC/DCSwitching Current max. 1A, min. 10 mATransistor Out 1 and Out 2, PNP, 10 mA
TECHNICAL DATA
145Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
plug-interminals clamping frame
dimensionsin mm
723
DIMENSIONS
Technical data signo 723.1
CONNECTION DIAGRAM
ORDER INFORMATION Version Supply Voltage Ordering code
without interface 12 … 24 VDC 0 723 101115/230 VAC 0 723 102
This counter is available with several interfaces. See next pages.
Components 2001146 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Variable Preset Counter and Position indicator with Interface RS 485 / RS 232
TECHNICAL DATA
Large 6 digit LED display, 14 mm
Up-/down counter, 6 digits, with different count modes and prescaler
2 preset values or 2 limit values
Transistor outputs (PNP) and relay outputs (changeover contacts)
Compact DIN 48 x 96 mm
Easy manual operation with function keys
Interface: RS 485 or RS 232
Protocol
RS 485
Power Supply Voltage 12...24 VDC or 115/230 VACSensor Supply AC-operation: 12...24 VDC, DC-operation: Vop-2V, Imax. = 60 mA
Inputs:Switching Level < 2 V and > 8 V, max. 40 VDCActive Edge positive PNP or negative NPN programmableCount Input with prescaler programmable 0,0005 ... 99,9999
- as phase discriminator input with single, double or quadruple evaluation
- as differential input- as up/down input
Count Frequency max. 40 kHz or 30 HzControl Inputs Reset, Gate, Hold and Keylock
Outputs:Relay Out 1 and Out 2 with changeover contact, 1 A, 250 VAC/30 VDCTransistor Out 1 and Out 2 with PNP-Output, 10 mAmaximum length 15 m
Input R x Dtypical input resistance 5 kOhmmax input voltage 30 V
Input T x Doutput voltage 8 Voutput current max. 20 mA
Terminals A and Btypical input resistance 12 kOhmmax input voltage – 7 .. + 12 Voutput level High: 3.5 V, Low: 1.3 Voutput current max. 60 mAmaximum bus length 2000 mdata transfer rate 1200, 2400, 4800 Bauddata format 7 bits, even parity
8 bits, no paritystop bits 1 protocol Hengstler TP3 or ASCII (depending on version)
RS 232
For further technical information please refer to the pages describing signo 723.1 and signo727.1
signo 723signo 727
147Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
DIMENSIONS
CONNECTION DIAGRAM
PRINTER PROTOCOL FOR 723.1
PRINT MASKS
Protocol Standard ASCII Baudrate 1200, 2400, 4800 BaudData format 7 Bits, even Parity, 1 Stop bit
8 Bits, no Parity, 1 Stop bitLine and Form Feeds programmable before and after printoutCutter Control programmable
The counter allows for the programming of 5 different print masksMask 0 only Count ValueMask 1 Counters: <value> Mask 2 Counter: <value>Mask 3 Counter: <value>
Preset1: <value>Preset2: <value>Set: <value>Prescaler: <value>
Mask 5 Length: <value> m
9648
socket connectorsClamping frame
dimensions in mm
108
panel cutout: 45 x 92
signo 723signo 727
Components 2001148 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Remote Terminal ConverterRTCThe RTC is needed if more than one counter is to be connected to the PC or if thedistance between the machine and the PC is longer than 15 m. up to 31 counters can be connected to the RTC via RS 485 bus Connection RTC - PC is a standard RS 232 optimally tuned for operation with the Hengstler Software HTS (Hengstler
Terminal Server) Power supply 12..24 VDC or 12..18 VAC, max. 2 VA (plug-in power supply
available as accessory)
DIMENSIONS width 115 mm / height 38 mm / depth 165 mm
CONNECTION DIAGRAMS Connector ST 1
pin signal1 AC/DC2 Earth3 AC/DC
Connector ST 3
pin signal1.3 RS 485 A +2.4 RS 485 B -5 Earth
Connector ST 2
pin signal description1 DCD Carrier Detect2 RXD Receive Data3 TXD Transmit Data4 DTR Data Terminal Ready5 GND Signal Ground6 DSR Data Set Ready7 RTS Request To Send8 CTS Clear To Send9 RI Ring Indicator
ORDER INFORMATION
Counter
Counter with time counter
PC-driversoftware for TP3 Protocol
RTC ConverterRS 485 / RS 232
Version with interface 12...24 VDC 115/230 VACsigno 723 Printersoftware RS232 0 723 150M1 0 723 151M1signo 723 TP3 Protocol RS232 0 723 150M3 0 723 151M3
RS485 0 723 160M3 0 723 161M3signo 727 TP3 Protocol RS232 0 727 150M3 0 727 151M3
RS485 0 727 160M3 0 727 161M3
signo 723 TP3 Protocol RS485 0 723 125 0 723 126
Windows 3.X 0 723 165Windows 95 / NT 0 723 167DOS (ab 3.2) vt3com.exe 0 723 166TP3.com 0 723 168
RTC 0 723 169Plug-in power supply for RTC 3 560 032Connection cable RTC-PC (RS 232), 5 m 1 723 055
signo 723signo 727
149Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Windows Software HTS for Counters
‘ Logical counter adressConst CounterAddress = 25‘ registers of a counterConst CounterValue = 0Const Preset1 = 1Const Preset2 = 2Const Chain = 3
‘ read counter and insert result in table 1Sub Read_Counter()
Set Hts = GetObject(Class:=“Hengstler.TerminalServer.10“)Result = Hts.ReadRegister(CounterAddress; CounterValue)Sheets(„Table1“).Cells(6; 2).Value= Result
Ende Sub
Sub Write_Counter()Data = Sheets(„Table1“).Cells(2; 2).ValueSet Hts = HoleObject(Class:=“Hengstler.TerminalServer.10“)Result = Hts.WriteRegister(CounterAddress; CounterValue; Data)
Ende Sub
EXAMPLE
EXAMPLE
Reading and writing a counter from within MS Excel:
Guided Setup A program group and start icon are created automatically Setup registers the OLE attributes of HTS in the Windows registry DDE- and OLE Server
The driver can be called in several ways: Command line (DOS prompt) within a batch file from within an application, e.g. via system() function call Automatic handling of several counter registers by means of a job file.
Example of a driver call (uploading preset value 2): literal value: vt3com.exe 25 dw I002 #89462value out of a file:vt3com.exe 25 dw I002 value.dat
Connection to DOS Hengstler TerminalDriver vt3com.exe
signo 723signo 727
Components 2001150 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo GLZ Variable Preset Counter with PTB-ApprovalVersions with Programmable Prescaler
large, 6-digit, 14mm high LED display up/down counter with programmable resolution (dm, cm or mm) 2 preselections of which one is programmable as trailing signal easy direct selection by 2 lockable function keys two relay outputs with change-over contacts keypad can be secured against unauthorized access also available with printer interface For measuring belt systems versions with programmable prescaler
COMPONENTS FOR THIS LENGTHMEASURING SYSTEMsee also under ”PTB approved measu-ring systems”
TECHNICAL DATA Count input – Phase discriminator with single evaluation, impulse resolution in mm, cm, dm (Standard)Prescaler (only-P version) 0.0005…99.9999
Length Resolution programmable in dm, cm or mm by adjusting the decimal point (Standard version) or programmable with prescaler
Pulse Duration min. 12.5 µs Count Frequency max. 40 kHz
Control Inputs: Reset – manual by reset key
– external, static or dynamic, programmable– pulse duration: >3 ms or >17 ms
Gate static, pulse duration >12 µs >17 ms Display Hold static, pulse duration >3 ms Keylock static, pulse duration >3 ms
All other data are according to signo 723.1
Type Standard Supply Voltage Ordering Codesigno GLZ 115/230 V AC 0 723 180signo GLZ with RS 232 interface 115230 V AC 0 723 181
Type with Prescaler Supply Voltage Ordering Codesigno GLZ-P 115/230 V AC 0 723 182signo GLZ-P with RS 232 115/230 V AC 0 723 183
867863
267103
467803186786
3267103
1
1
723.181
723.180
ORDER INFORMATION
Measuring wheelCircumference 20 cm
Measuring wheelCircumference 50 cm
Shaft encoderType RI 58-O
CounterType signo GLZOrdering code 0 723 181with printer interface
Countersigno GLZOrdering code 0 723 180without printer interface
Type signo 723.5Ordering code 0 723 580
PrinterType Primo
151Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
PTB (German Federal Institute for Physics and Technology) approved design forlength measuring devices appropriate for verification
2 continuously visible presets Prescaler Batch and batch preset counter Connection with plug-in screw terminals Small, compact design in DIN dimensions 72 x 72 mm Keypad can be secured against unauthorized access Electronic data retention, environmentally safe, without battery
DISPLAY
Variable Preset counter signo 723.5
6-digit LCD with 13 mm high figures indicating the count value, easy to read andwith programmable decimal point.
Line 1: Program indicators: show the current program step during programming. Line 2: Count display: shows the count in counting operation, parameters and ope-
rating mode during programming Line 3: Preset display: this line shows continuously either the preset values 1 and 2
or the batch and batch preset counter.Line 4: Output indicators: if one of these indicators is visible, the corresponding out-
put is active.
PROGRAMMINGThe programming mode of signo 723 is split up in two input levels:
Input level 1: Comprises presets and numeric values which are altered more fre-quently.
Input level 2: Here, machine-specific parameters can be programmed which aregenerally only set when first starting up.
As a safeguard against unauthorized programming, signo 723 is provided with twocontrol inputs for locking out input level 2 or the entire keypad.
Components 2001152 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 723.5 Technical data
Display LCD, 6-digit count display, two 6-digit preset values,leading zero suppression, floating minus sign, decimal point
Digit height 13 mm (count)Supply voltage Vop 12 ... 24 VDC - 5/+ 10%, 24 VAC + 10 % or 100 ... 240 VAC,
depending on versionCurrent consumption on 12 ... 24 VDC < 200 mA, on 24 VAC < 300 mA,
on 100 ... 240 VAC < 50 mASensor supply AC operation 24 VDC + 10 %, DC operation Vop - 2 V,
current consumption max. 60 mAValue retention approx. 10 years, without battery (NV memory)Operating temperature 0 ... + 50 °CStorage temperature - 20 ... + 70 °CElectrical connection plug-in screw terminalsMounting with installation frameProtection class (IEC 144) front IP 65; connections IP 20Interference immunity EMC severity 3 acc. to IEC 801- pt. 2 + pt. 4Vibrostability 20 m/s2 (10...150 Hz) acc. to IEC 068-2-6Shock stability 100 m/s2 (15 ms) acc. to IEC 068-2-27General design acc. to VDE 0411, DIN 57 411, protection class IIApprovals PTB: 1.22-3251.11 (Ord.code 0 723 580)
InputsAmplitude thresholds < 2 V and > 8 V, max. 40 VDCActive edge positivePulse shape random (squarewave 1:1 for max. frequency)Input resistance approx. 5 kΩCount input with prescaler, programmable from 0.0005 ... 99.9999
- phase discriminator with single, dual or quad evaluation- differential input- counter advance sense input
Min. pulse length 100 µs (5 kHz), 17 ms (30 Hz)Max. counting frequency 10 kHz or 30 Hz, programmable
Control inputsReset with static behaviour
- manual via keypad- external reset, pulse length > 100 µs,/ > 20 ms- automatic after preset 2 has been reached
(only if programmed accordingly)Gate static, pulse length:
non-attenuated > 100 µs , attenuated > 20 msDisplay memory (appl.) static, inactive for > 200 ms when starting up pulse
length > 500 µsKeylock static, pulse length > 100 ms
OutputsRelays OUT1 and OUT2Contact type make contact with snubberMax. switching voltage 250 VAC/30 VDC ref. to groundSwitching current max. 1A, min. 100 mA on 20 VTransistor OUT1, OUT2 and OUT3 (batch preset)Switching voltage AC operation 24 VDC, DC operation Vop - 2 VSwitching current 20 mASum output current < 90 mA, for transistor outputs and sensor supplyInterface: RS 485 with Suconet - or Profibus Protocol FMS + DP
TECHNICAL DATA
153Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONS
Dimensions in mm
CONNECTION DIAGRAM
ORDER INFORMATION
Counter
Version Supply voltage Ordering code Ordering codewith additionaltotalizer
signo 723 12 … 24 VDC 0 723 501 0 723 505 100 … 240 VAC 0 723 502 0 723 506 24 VAC 0 723 503 –––
PTB version (Standard) 100 … 240 VAC 0 723 580 –––
This counter is available with serveral interfaces. See next pages.PTB version see next page.
Technical data signo 723.5
Clamping framePlug connector terminal
Components 2001154 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 723.5 Technical data
Counter Shaft encoder Measuring wheels
orsigno 723
Ord. code 0 723 580(Supply 100...240 VAC)
Application:Threads and yarns
Application:Rubber, soft plastics,wood with roughsurface, certain fabrics
Application:Threads, yarns, ribbons
Application:Wire, metals,steel profiles
Ord. code 0 601 017Circumference 20 cm
TypeRI 58-0/20Ord. code 0 522 559(3 channels, 20 I/U)
TypeRI 58-0/50Ord. code 0 522 571(3 channels, 50 I/U)
Ord. code 0 601 121Circumference 50 cm
Ord. code 0 601 052Circumference 50 cm
Ord. code 0 601 063Circumference 50 cm
SIGNO 723 PTB VERSION
Set-up of the measuring system
PTB-APPROVAL Approval certificate No. 1.22-3251.11
The Physikalisch-Technische Bundesanstalt (PTB, German Federal Institute for Phy-sics and Technology) in Braunschweig has tested and approved signo 723 for its sui-tability for use with measuring equipment appropriate for verification in conjunctionwith shaft encoders and measuring wheels (see "Order information").
In the "PTB version", input level 2 of the counter is permanently programmed to ful-fil PTB requirements. In reset mode, the counter cannot be reset automatically.
155Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Variable Preset Counterwith Interface
signo 723.5
2 continuously visible presets Prescaler Batch and batch preset counter Connection with plug-in screw terminals Small, compact design in DIN dimensions 72 x 72 mm Keypad can be secured against unauthorized access Electronic data retention, environmentally safe, without battery
TECHNICAL DATA Power Supply Voltage 12....24 V DC or 100...240 V AC Sensor Supply AC operation: 24 V DC, DC operation: V DC - 2 V, Imax. = 60mA
Inputs:Switching Level < 2 V and > 8 V, max. 40 V DCActive Edge positive pnpCount Input with prescaler, programmable 0.0001 to 99.9999
- as phase discriminator input with single, double, or quadruple evaluation
- as differential input– as up/down input
Count Frequency max. 10 kHz, 5 kHz or 30 HzControl Inputs Reset, Gate, Hold, Keylock,
Outputs:Outputs: Relay Out 1, Out 2, Out Trail, each as n. o. contact,
1 A, 250 V AC/ 30 V Dc'Transistor Out 1, Out 2, Out Batch, PNP, max. 20 mATotal output current Transistor output plus Sensor Supply current must not
exceed 90 mA
Interface RS 485Wiring: twisted and shieldedMaximum length: 600 m for Suconet,
1200 - 200 m for Profibus (depending on baud rate)Noise Immunity EMC: Data transfer may be disturbed temporarily by EMC, which is
recognised and automatically repeated by the protocol.
Protocol (RS 485)Data transfer rate 187,51 kBd Suconet/ 9.6, 19.2, 500 kBd ProfibusData format (Protocol) Suconet - K, class 1 /Profibus DP and FMSCounters/Interface 31 per interfaceBus structure Line, must be terminated on both ends with a resistor
Refer to chapter "Preset Counter signo 723.5" for more technical data
Components 2001156 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 723.5 Technical data
CONNECTION DIAGRAM
DIMENSIONS
ORDER INFORMATIONCounter
Version 12 … 24 VDC 100 … 240 VAC
SUCONET interface RS 485 0 723 591 0 723 592PROFIBUS interface RS 485 FMS + DP 0 723 593 0 723 594
PC card SUCONET EPC 335 0 070 701Software PROFIBUS (GSD-Data) 0 723 595
"Preset Counter signo 723.5" for more versions
Accessories
Dimensions in mm
Clamping framePlug connector terminal
157Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Counting frequency up to 20 kHz 2 constantly visible presets plus trailing preset Repeatable, freely selectable setting value Batch counter with preset Variety of programming options for outputs and modes Teach-in function DIN dimensions 144 x 72 mm Connection with plug-in screw terminals
DISPLAY
signo 724
A Count display: 14 mm-high, 7-digit LED display unit with pilot sign and decimalpoint. During counting operation the current count is indicated, during pro-gramming the display shows the various parameters.
B Preset display: 7 mm-high, 6-digit LED display unit with pilot sign, decimal pointand indicators. During counting operation presets 1 and 2 or batch and batch preset counter are shown constantly (programmable).
C LED indicators show the individual program steps during programming.
Programmable Control Counter signo 724
Components 2001158 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 724 Technical data
PROGRAMMING For practical reasons the different programming options are split up in three inputlevels.Input level 1: - Access to presets and counter values which are frequently altered.Input level 2: - Programming of equipment and machine-specific parameters.Input level 3: - Programming of operating and counting modes. This is only required
for initial start-up or if the machine configuration has been modi-fied.
Input levels 1 and 2 can be secured against unauthorized manipulation with "keylock"inputs. Then only the set values are displayed.
159Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
– RS 232 – Printer interface- RS 485 - Profibus*, Suconet field busCommunication with the PC is possible via SUCONET and PROFIBUS. Any AT-PC withspace for an expansion card (e.g. Klöckner Möller SUCONET card EPC 335) may beused. This card can communicate with up to 30 counters.The software required for interface control purposes is designed for 30 counters.* Hengstler is member of the PNO (Profibus User Organisation)
OPERATING MODES
Technical data signo 724
Signo 724 can be programmed for a variety of operating modes. This provides youwith a simple solution for virtually any requirement in the wide range of industrialapplications.
INTERFACE (optional)
PLC applications are also possible, please contact us for further information.
Coincidence modeCOINCIDENCE
Components 2001160 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 724 Technical data
Display LED, 7-digit count indication, two 6-digit presets, leading zero suppression, pilot sign and decimal point
Digit height count 14 mm, presets 7 mmSupply voltage Vop 12 ... 24 VDC - 5/+ 10 %, 24 VAC + 10 % or 100 ... 240 VAC,
depending on versionMax. current consumption on 12 ... 24 VDC typ. 500 mA, on 100 ... 240 VAC typ. 150 mASensor supply AC operation 24 VDC +10 %, DC operation Vop - 2 V, max. 60 mAValue retention approx. 10 years, without battery (NV memory)Operating temperature 0 .... + 50 °CStorage temperature - 20 ... + 70 °CElectrical connection plug-in screw terminalsProtection class (EN 60529) front IP 64, connections IP 20Interference immunity EMV severity 3 acc. to IEC 801-pt. 2 + pt. 4Vibrostability 10 m/s2 (10 ... 150 Hz) acc. to IEC 068-2-6Shock stability 50 m/s2 (22 ms) acc. to IEC 068-2-27General design acc. to DIN VDE 0411; protection class IIWeight approx. 500 g
InputsAmplitude thresholds < 2 V and > 8 V, max. 40 VDCActive edge positivePulse shape random, squarewave 1:1 for max. frequencyInput resistance approx. 5 kΩCount input with prescaler, programmable from 0.0001 ... 99.9999.
- phase discriminator with single, dual or quad evaluation- differential mode- count direction mode
Pulse length min. 25 Ms (20 kHz), 100 Ms (5 kHz), 17 ms (30 Hz)Max. counting frequency 20 kHz, 5 kHz or 30 Hz programmable
Control inputsReset with static behaviour
- manual via keypad- external reset, pulse length : > 25 ms (20 kHz),
100 ms (5 kHz), > 20 ms (30 Hz)- automatic when main preset has been reached (only if programmed accordingly)
Reset + OUT pulse length > 5 msBatch reset dynamic, pulse length > 20 msGate static, pulse length: >25 ms (20 kHz), >100 ms (5 kHz),
> 20 ms (30 Hz)Display memory (Appl.) static, pulse length > 6 msKeylock static, pulse length > 50 ms
OutputsSignal outputs OUT1, OUT2, OUT-B (batch), OUT-T (trailing signal), DIRRelay OUT1, OUT2 and OUT-TContact type changeover contacts with snubberMax. switching voltage 30 VDC/250 VAC ref. to ground, max. 1 ATransistor OUT1, OUT2, OUT-B, OUT-T and DIR active High,
not short-circuit-proof Switching voltage AC operation 24 VDC + 20 %, DC operation Vop - 2 VSwitching current < 50 mA per outputSum of output currents < 240 mA for transistor outputs and sensor supply voltageOutput delay 10 ms
TECHNICAL DATA
161Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONS
Technical data signo 724
Dimensions in mm
CONNECTION DIAGRAM
ORDER INFORMATIONCounter
Version 12 … 24 VDC 100 … 240 VACControl counter 0 724 001 0 724 002
This counter is available with serveral interfaces. See next pages
Note counter information
Note counter information
Components 2001162 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 724 Programmable Control Counterwith Interface
Counting frequency up to 20 kHz 2 constantly visible presets plus trailing preset Repeatable, freely selectable setting value Batch counter with preset Variety of programming options for outputs and modes Teach-in function DIN dimensions 144 x 72 mm Connection with plug-in screw terminals
TECHNICAL DATA
RS 232
RS 485
Power Supply Voltage 12....24 V DC or 100...240 V AC Sensor Supply AC operation: 12...24 V DC, DC operation: VDC - 2 V, Imax. = 60mA
Inputs:Switching Level < 2 V and > 8 V, max. 40 V DCActive Edge positive pnpCount Input with prescaler, programmable 0.0001 to 99.9999
- as phase discriminator input with single, double, or quadruple evaluation
- as differential input- as up/down input
Count Frequency max. programmable for 20 kHz, 5 kHz or 30 HzControl Inputs Reset, Gate, Hold, Keylock,
Reset + Out, Batchcounter Reset, Disable Inputs
Outputs:Outputs: Relay Out 1, Out 2, Out Trail, each as changeover contact,
1 A, 250 V AC/ 30 V DCTransistor Out 1, Out 2, Out Trail, Out Batch, PNP, max. 50 mATotal output current Transistor output plus Sensor Supply current must not
exceed 240 mA
Interface RS 232Maximum length: 15 mInput RxDOutput TxD
Protocol (RS 232)Data transfer rate 9600 BaudData format 8 Bits, no ParityStop bits 1Protocol Standard ASCII-Code
Interface RS 485Wiring: twisted and shieldedMaximum length: 600 m for Suconet,
1200 - 200 m for Profibus (depending on baud rate)Noise Immunity EMC: Data transfer may be disturbed temporarily by EMC, which is
recognised and automatically repeated by the protocol.
Protocol (RS 485)Data transfer rate 187,51 kBd Suconet/ 9.6, 19.2, 500 kBd ProfibusData format (Protocol) Suconet - K, class 1 /Profibus DP and FMSCounters/Interface 31 Bus structure Line, must be terminated on both ends with a resistor
"Preset Counter signo 724" for more technical data
163Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data signo 724
Dimensions in mm
CONNECTION DIAGRAM
DIMENSIONS
ORDER INFORMATIONCounter
Version with Interface 12...24 VDC 100...240 VAC
RS 485 Suconet 0 724 091 0 724 092RS 485 Profibus FMS + DP 0 724 093 0 724 094RS 232 Printersoftware 1 724 514 0 724 050M1 0 724 051M1RS 232 Printersoftware 1 724 518 0 724 050M2 0 724 051M2RS 232 Printersoftware 1 724 520 0 724 050M3 0 724 051M3RS 232 Printersoftware 1 724 521 0 724 050M4 0 724 051M4RS 232 Printersoftware 1 724 526 0 724 050M7 0 724 051M7RS 232 Printersoftware 1 724 527 0 724 050M8 0 724 051M8
Print variants see next page
PC card SUCONET EPC 335 0 070 701Software PROFIBUS (GSD-Data) 0 723 595RS 232 cable with 9 pin. Sub-D-Connector, 2.5 m E 1522437
"Preset Counter signo 724" for more versions
Accessories
Components 2001164 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 724 Print Variants
FLATBED PRINTERDATATECHNO
PRIMO PRINTER 0 688 310 WITH REAL TIME CLOCK
STANDARD ASCII PRINTER Order number for softwarePrint variants 1 724 526 1 724 527
for standard ASCII printer for standard ASCII printerMask 1 Counter <value> Counter <value>
Preset 1 <value> Preset 1 <value>Preset 2 <value> Preset 2 <value>Set <value> Set <value>Batchcounter <value> Batchcounter <value>Batchpreset <value> Batchpreset <value>
Mask 2 Counter <value> Counter <value>Mask 3 Counter <value> <value> m
Batchcounter <value>Mask 4 same as Mask 1 Länge: <value> mPrintout triggered Keyboard, preset 2, batch- Keyboard, preset 2,by preset, application input 3 application input 3, reset
Order number for softwarePrint variants 1 724 518 1 724 520
for flatbed printer with offset for flatbed printer without offsetMask 1 Zählerstand <value> *HENGSTLER GmbH*
Vorwahl 1 <value> Parameterliste signo 724Vorwahl 2 <value> Zählerstand <value>Setzwert <value> Vorwahl 1 <value>Partiezähler <value> Vorwahl 2 <value>Partievorwahl <value> Setzwert <value>
Partiezähler <value>Partievorwahl <value>
Mask 2 Länge: <value> m Länge: <value> mTop margin = 195 mm
Mask 3 Länge: <value> m Länge: <value> mTop margin = 53 mm Bold
Mask 4 Länge: <value> Länge: <value> mOffset = same as mask 1
Printout triggered Preset 2, Keyboard, preset 2, batch-by Application input 3 preset, resetinput, application input 3
Order number for softwarePrint variants 1 724 514 1 724 521
*for Primo with date / time *for Primo with date / timeGerman English
Mask 1 Zähler <value> Counter <value>Vorwahl 1 <value> Preset 1 <value>Vorwahl 2 <value> Preset 2 <value>Setzwert <value> Set <value>Partiezähler <value> Batchcounter <value>Partievorwahl <value> Batchpreset <value>Zeit: <hh:mm:ss> Time: <hh:mm:ss> AMDatum: <day, 25. 8. 96> Date: <day, 8-25-96>
Mask 2 Länge: <value> m <Date, time, countvalue>Zeit: <hh:mm:ss> on a single line Datum: <day, 25. 8.96>
Mask 3 Länge: <value> m Counter: <value>Anzahl:<value> Stk. Batchcounter:<value>Zeit: <hh:mm:ss> Time: <hh:mm:ss> AMDatum: <day, 25. 8.96> Date: <day, 8-25-96>
Mask 4 same as Mask 2 with line same as Mask 2 with line feed and cutting feed and cutting
Printout triggered Keyboard, preset 2, batch Keyboard, preset 2, batch preset, Application input 3 preset, Application input 3
165Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Shift Counter
Registration of 5 shifts and totalizer Speed registration (tachometer function) Machine service time registration (elapsed time counter) Preset counter with 2 presets Highly resistant front panel, IP 65 DIN dimensions 144 x 72 mm Connection by means of plug-in screw terminals
DISPLAY
A 14-mm-high, 7-digit LED display unit with sign and decimal point. During counting operation the current count is indicated, during programming the display shows the different parameters.
B 7-mm-high, 6-digit LED display unit with sign, decimal point, shift display andindicators (designation of measured values).
C LED indicators show the display mode "counter" and individual program stepsduring programming.
BLOCK DIAGRAM
signo S-724
Pulseinput
Pulsegenerator
Totalizer
Shift 1
Shift 5
Presetcounter with
2 presets
Tachometer(Display 1/min)
Elapsedtime meter
Components 2001166 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo S-724
PROGRAMMING
INPUT LEVEL 1 AND 2
Technical data
With the shift counter signo S-724 it is possible to register and monitor at one glance:- Total production output- 5 shift production output values- Speed- Machine service time- Control of production unitsThe integrated tachometer of the signo S-724 is based on the principle of periodmeasurement. Measured values are indicated in 1/min. The display can be standar-dized as required by means of the prescaler.Machine service time is measured with an integrated elapsed time counter anddisplayed in 0.1 h.
For practical reasons the different programming options are split up in three inputlevels.Input level 1: - Access to preset counter (preset, setting value, and correction). Input level 2: - Programming of equipment and machine-specific parameters.
- Service time indication- Shift counter and totalizer reset
Input level 3: - Programming of operating and counting modes. This is only required for initial start-up or if the machine configuration has been modified.
Input levels 1 and 2 can be secured against unauthorized manipulation with "keylock"inputs. Then only the set values are displayed.
167Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Display LED, 7-digit totalizer, 6-digit shift counters; 5 shift registers can be selected
Digit height totalizer 14 mm, shift counters 7 mmSupply voltage Vop 12 ... 24 VDC - 5 +10 %, 24 VAC + 10 % or 100 ... 240 VAC,
depending on versionMax. current consumption on 12 ... 24 VDC typ. 500 mA, on 100 ... 240 VAC
typ. 150 mASensor supply AC operation 24 VDC + 10 %, DC operation Vop -2 V,
max. 60 mA Value retention approx. 10 years, without battery (NV memory)Operating temperature 0 ... + 50 °CStorage temperature - 20 ... + 70 °CElectrical connection plug-in screw terminalsMounting with clamping frameProtection class (IEC 144) front IP 65, connections IP 20Interference immunity EMC severity 3 acc. to IEC 801 - pt.2 + pt. 4Vibrostability 10 m/s2 (10 ... 150 Hz) acc. to IEC 068-2-6Shock stability 50 m/s2 (22 ms) acc. to IEC 068-2-27General design acc. to DIN VDE 0411; protection class IIWeight approx. 500 g
InputsAmplitude thresholds < 2 V and > 8 V, max. 40 VDCActive edge positivePulse shape random, squarewave 1:1 for max. frequencyInput resistance approx. 5 KΩCount input with prescaler, programmable from 0.0001...99.9999.
- phase discriminator with single, dual or quad evaluation- differential mode- count direction mode
Pulse length min. 500 µs (1 kHz), 17 ms (30 Hz)Max. counting frequency 1 kHz or 30 Hz programmable
Control inputsReset with static behaviour
- manual via keypad- external reset, pulse length: > 500 µs (1 kHz), > 20 ms (30 Hz)- automatic reset when main preset has been reached (only if programmed accordingly)
Reset + OUT pulse length > 5 msShift reset dynamic, pulse length > 50 msGate static, pulse length: > 500 µs (1 kHz), >20 ms (30 Hz)Keylock static, pulse length > 50 ms
Outputs Signal outputs OUT1 and OUT2Contact type changeover contacts with snubberMax. switching voltage 30 VDC/250 VAC ref. to ground, max. 1 ATransistor active High, not short-circuit-proofSwitching voltage AC operation 24 VDC + 20 %, DC operation Vop -2 VSwitching current < 50 mA per outputSum of output currents < 240 mA for transistor outputs and sensor supply voltageOutput delay 10 ms
TECHNICAL DATA
signo S-724
Components 2001168 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Version 12 … 24 VDC 100 … 240 VAC
Shift counter 0 724 041 0 724 042
INPUT LEVEL 3
Technical data
DIMENSIONS
CONNECTION DIAGRAM
ORDER INFORMATION
signo S-724
Dimensions in mm
169Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Plug-in 1 Channel Preset Counterwith LED display
Adding/subtracting count direction 6-digit LED display Value retention approx. 10 years without battery (NV memory) Relay or transistor outputs Preset value can be entered with keypad Plugs into modular system 400
Type 711
Display 6-digit LEDDigit height 7 mmSupply voltage Vop 12 … 24 VDC ± 10 % Max. current consumption 120 mA on 12 VDCValue retention approx. 10 years, without battery (NV memory)Operating temperature - 10 … + 50 °CStorage temperature - 20 … + 70 °CMounting modular system 400Mounting position anyProtection class (EN 60529) front IP 54; connections IP 00; for higher degree of
protection we recommend a protective case with clearcover (see “accessories“)
Interference immunity EMC EN 50082-2Emission EMC EN 50081-2Vibrostability (IEC 68) 50 m/s2
Shock stability 150 m/s2 11 msGeneral design acc. to DIN VDE 0411
InputsAmplitude thresholds < 2 V and > 8 V, max. + 40 VDCActive edge negative or positive, depending on versionPulse shape random (squarewave 1:1 for max. frequency)Input resistance approx. 22 kΩCount input adding or subtracting, depending on programMin. pulse length 100 µs (5 kHz), 17 ms (30 Hz)Max. counting frequency 5 kHz or 30 Hz, programmableControl inputs staticReset - manual via keypad, secured against accidental reset
– electric reset with external reset pulse, pulse length 100 µs, (5 kHz) or 17 ms (30 Hz)
– automatic reset after preset has been reached (only if programmed accordingly)
OutputsSignal outputs OUTSignal duration 50 ms... bistable, adjustableRelays only in corresponding versionType of contact single pole changeover contact, floating Switching voltage max. 250 VAC/50 VDCSwitching current max. 1 A, min. 10 mATransistor only in corresponding versionSignal type PNP or NPN, depending on versionSwitching voltage 0 V or Vop, depending on versionSwitching current max. 40 mA
* Count and reset input are available with independently positive or negative active edge,* if required.
TECHNICAL DATA
Components 2001170 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
PROGRAMMING
Function Program switches1 2 3 4 5 6 7
Reset input 30 Hz on5 kHz off
Count input 30 Hz on5 kHz off
Preset input disabled onenabled off
Auto reset on offofff on
Set mode (Set) to P on(Res) ato „0“ off
Count direction subt. onadd. off
Button reset disabled offenabled on
Application-specific programming is required before taking the counter into operation
Programming
DIMENSIONSwith connection box
with connection box and panel frame 50
60
63 75
88.5 3
6992.5
36
69
92.5
50
50
51
51
All dimensions in mm
Type 711
50 ms bistable
171Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Version PNP NPN
Relay output 0 711 410 0 711 400Transistor output 0 711 427 0 711 424 Output signal-memory 0 711 419 –
Connection box 12 … 24 VDC 1 405 670 Connection box 24 VAC 1 711 047Panel frame black 1 405 492 Power supply unit with connection box 220 VAC 1 711 010Power supply unit with connection box 110 VAC 1 711 011 Case with protective cover see "Accessories"
Output signal memoryThe signal status of the output is stored in case of a power supply failure and re-establishedwhen the power supply is restored.Please inquire for the following options:– Decimal point at one of the last 3 digits
CONNECTION DIAGRAM
Technical data
ORDER INFORMATIONCounter
Accessories
Type 711
Components 2001172 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Repeating Counter
Continuously visible preset Relay or transistor outputs LED indicators for input and output signals Plugs into modular system 400
TECHNICAL DATA Display No count indication, switch set preset value is continuously visible, LED indicators for input and output signals
Supply voltage Vop 12 VDC ± 10 %, 24 VDC +– 10 % via connection box Max. current consumption 60 mA on 12 VDCValue retention noneOperating temperature – 10 … + 60 °C Storage temperature – 25 … + 65 °C Mounting modular system 400Mounting position anyProtection class (IEC 144) front IP 30; connections IP 00; for higher degree of
protection we recommend a protective case with clear cover (see "Accessories")
Interference immunity EMC severity 2 acc. to IEC 801 pt. 2 and pt. 4Vibrostability 50 m/s2 acc. to IEC 068-2-6 General design acc. to DIN VDE 0411Weight approx. 90 g
InputsAmplitude thresholds < 2 V and > 8 V, max. + 30 VActive edge positivePulse shape random (squarewave 1:1 for max. frequency)Input resistance approx. 20 kΩ
Count inputMin. pulse length 100 µs (5 kHz), 17 ms (30 Hz) Max. counting frequency 5 kHz/30 Hz, programmableControl inputs static Reset – manual with button
– electric reset with external reset pulse, min. pulse length 250 µs
– automatic reset after preset has been reached– power-up reset when supply voltage is connected
OutputsSignal outputs OUTSignal duration approx. 100 msRelay depending on versionContact type Changeover contact, floatingSwitching voltage max. 250 VAC/50 VDCSwitching current AC 400 mA, DC 2 A, non-inductiveTransistor depending on versionSwitching voltage > 11 VDCSwitching current max. 100 mA
Type 781
173Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONS
Counter
with connection box
with connection box and panel frame
CONNECTION DIAGRAM
ORDER INFORMATION
Counter
Ordering code
Counter with relay output 0 781 410 Counter with transistor output 0 781 411
Connection box 12 … 24 VDC 1 711 005 Connection box 24 VAC 1 711 047 Panel frame, black 1 405 492 Power supply with connection box 220 VAC 1 711 010 Power supply with connection box 110 VAC 1 711 011 Case and protective cover, see accessories
The repeating counter is also available in a clock generator version. For description andorder information see "Time counters".
Accessories
Counter type 781 Installation cutout
Technical data Type 781
Components 2001174 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Adding Preset Counter, Plug-in System
Preset value continuously visible Manual, electric or automatic reset 3 or 5-digit indication Plugs into modular system 400
Type 486/487
Display 3 or 5-digit indication of count and preset value, depending on version
Digit height 4 mmSupply voltage Vop see ordering code table, tolerance ± 10 %
230 VAC + 6–10 %Power consumption counter: DC version 2.5 W, AC version 2.75 VA
reset solenoid: DC version 12 W, AC version 16 VAResidual ripple 48 %Operating temperature – 10 … + 50 °C Storage temperature – 40 … + 85 °C Electrical connection AMP connector, 0.8 x 2.8 mm (with connection box)Mounting modular system 400Mounting position roller axis horizontalProtection class front IP 40; connections IP 00; for higher degree of (EN 60529) protection we recommend a protective case with clear
cover (see "Accessories")General design DIN EN 61010-1
Protection according to class IIContamination level 2Over voltage category II
Duty cycle at 25 °C Counter 100 %; reset solenoid: DC version 20 %,max. 2 minutes, AC versions 10 %, max. 1 minute
at 50 °C Counter 50 %, max. 10 minutesMaintenance-free operation Counter 2 x 108, reset solenoid 1.5 x 106 pulses Approvals UL: E 41 784-11Count input addingMin. pulse length DC version 20 ms, AC version 50 msMax. counting frequency DC version 25 Hz, AC version 10 HzPulse duty factor 1:1Reset - manual with button
– external by electrical signal (versions with reset solenoidonly), Min. pulse length 200 ms (max. see duty cycle);for longer reset pulses a continuous duty module must be used (see "order information" and "accessory modules")
– automatic reset after preset has been reached (versions with reset solenoid only), using the automatic reset (see "order information" and "accessory
Reset frequency DC version max. 1 per s, AC version max. 1 per 2 sPulse duty factor DC version 1:5, AC version 1:10
Signal outputSignal duration from when preset has been reached until resetContact type Changeover contact, floatingSwitching voltage max. 220 VACSwitching current max. 20 VA/1 A, non-inductive
TECHNICAL DATA
175Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Voltage 3 digits 5 digits cont. duty automaticbutton reset el. reset button reset el. reset module reset
24 V DC 0 487 164 0 487 764 0 486 164 0 486 764 1 486 420 1 486 402 24 V AC 0 487 186* 0 487 786* 0 486 186 0 486 786 1 486 423 1 486 409
115 V AC 0 487 189 0 487 789 0 486 189 0 486 789 1 486 421 1 486 412 230 V AC 0 487 190 0 487 790 0 486 190 0 486 790 1 486 422 1 486 413
Inquire for other voltages
Connection box Ordering Code 1 405 537Key-reset system Ordering Code + SR e.g. 0 487 164 SRPanel frame, black Ordering Code 1 405 492
For further accessories see "Accessories"
** on request** For technical data and dimensioned drawings see accessory modules on page 209
Use only counters with electrical reset.The connection box is integrated in the module.
CONNECTION DIAGRAM
DIMENSIONSWith connection box
All dimensions in mm
With connection box and panelframe
ORDER INFORMATION
Counter
Standard accessories
** **
Type 486/487
Components 2001176 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Adding Preset Countersfor Front Panel Mounting
Preset value continuously visible Manual or electric reset 3 or 5-digit indication Various front panel sizes available
TECHNICAL DATA Display 3 or 5-digit indication of count and preset value, depending on version
Digit height 4 mmSupply voltage Vop see ordering code table, tolerance ± 10 %
230 VAC + 6–10 %Power consumption counter: DC version 2.5 W, AC version 2.75 VA
reset solenoid: DC version 12 W, AC version 16 VAResidual ripple 48 %Operating temperature – 10 … + 50 °C Storage temperature – 40 … + 85 °C Electrical connection AMP connector, 0.8 x 2.8 mmMounting screw or clamping spring attachment, see "Order
information"Mounting position roller axis horizontalProtection class front IP 40; connections IP 00; for higher degree of (EN 60529) protection we recommend a protective case with clear
cover (see "Accessories")General design DIN EN 61010-1
Protection according to class IIContamination level 2Over voltage category II
Duty cycle at 25 °C Counter 100 %, reset solenoid: DC version20 %, max. 2 minutes, AC versions 10 %, max. 1 minute
at 50 °C Counter 50 %, max. 10 minutesMaintenance-free operation Counter: 2 x 108, reset solenoid 1.5 x 106 pulses Approvals UL: E 41 784-11Count input addingMin. pulse length DC version 20 ms, AC version 50 msMax. counting frequency DC version 25 Hz, AC version 10 HzPulse duty factor 1:1Reset – manual with button
– external by electrical signal (versions with reset solenoid only), min. pulse length 200 ms (max. see duty cycle); Reset frequency DC version max. 1 per 2 s
Pulse duty factor DC version 1:5, AC version 1:10
Signal outputSignal duration from when preset has been reached until resetContact type changeover contact, floatingSwitching voltage max. 220 VACSwitching current max. 20 VA/1 A, non-inductive
Type 886/887
177Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
3 digits 5 digits
Voltage button reset el. reset button reset el. reset24 VDC 0 887 264 0 887 214 0 886 264 0 886 214 230 VAC 0 887 290 0 887 240 0 886 290 0 886 240
3 digits 5 digits
Voltage button reset el. reset button reset el. reset24 VDC 0 887 464 0 887 414 0 886 464 0 886 414 230 VAC – 0 886 490 0 886 440
Inquire for other voltages For key reset add ordering code + SR, e.g. 0 887 264 SR
ORDER INFORMATION
Counters for screw attachmentFront panel 60 mm x 75 mm
COUNTERS FOR SPRING ATTACHMENTFront panel 55 mm x 53 mm
CONNECTION DIAGRAM
DIMENSIONSFront panel 60 mm x 75 mm
Front panel 55 mm x 53 mm
Type 886/887
Components 2001178 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 446/447 Subtracting Preset Counter, Plug-in System
Manual or electrical reset 3 or 5-digit display Plugs into modular system 400
TECHNICAL DATA Display 3 or 5-digit count and preset value indication,depending on version.
Digit height 4 mmSupply voltage Vop see ordering code table, tolerance ± 10 %
230 VAC + 6–10 %Power consumption counter: DC version 2.5 W, AC version 2.75 VA
reset solenoid: DC version 12 W, AC version 16 VAResidual ripple 48 %Operating temperature – 10 … + 50 °CStorage temperature – 40 … + 85 °C El. connection AMP connector, 0.8 x 2.8 mm (via connection box)Mounting modular system 400Mounting position roller axis horizontalProtection class front IP 40; connections IP 00; for higher degree of(EN 60529) protection we recommend a protective case with clear
cover (see "Accessories")General design DIN EN 61010-1
Protection according to class IIContamination level 2Over voltage category II
Duty cycle at 25 °C Counter 100 %; reset solenoid: DC version20 %, max. 2 minutes, AC versions 10 %, max. 1 minute
at 50 °C Counter 50 %, max. 10 minutesMaintenance-free operation Counter 2 x 108, reset solenoid 1.5 x 106 pulses Approvals UL: E 41 784-11Count input subtractingMin. pulse length DC version 20 ms, AC version 50 msMax. counting frequency DC version 25 Hz, AC version 10 HzPulse duty factor 1:1Reset – manual with button
– external by electrical signal (versions with reset solenoidonly), Min. pulse length 200 ms (max. see duty cycle); for longer reset pulses a continuous duty module must be used (see "Order information" and "Accessory modules")
– automatic reset after preset has been reached (versions with reset solenoid only), using the automatic reset (see "Order information" and "Accessory modules")
Reset frequency DC version max. 1 per s, AC version max. 1 per 2 sPulse duty factor DC version 1:5, AC version 1:10
Signal outputSignal duration from when preset has been reached until resetContact type changeover contact, floatingSwitching voltage max. 220 VACSwitching current max. 20 VA/1 A, non-inductive
179Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
CONNECTION DIAGRAM
DIMENSIONS With connection box
All dimensions in mm
With connection box and panel frame
Voltage 3 digits 5 digits cont. duty automaticbutton reset el. reset button reset el. reset module reset
24 V DC 0 447 164 0 447 764 0 446 164 0 446 764 1 486 420 1 486 402 24 V AC 0 447 186 0 447 786 0 446 186 0 446 786 1 486 423 1 486 409
115 V AC 0 447 189 0 447 789 0 446 189 0 446 789 1 486 421 1 486 412 230 V AC 0 447 190 0 447 790 0 446 190 0 446 790 1 486 422 1 486 413
Connection box 1 405 537Panel frame, black 1 405 492Key-reset system Ordering code+ SR e.g. 0 447 164 SR
For further accessories see ”Accessories“.
Inquire for other voltages
** For technical data and dimensioned drawings see “accessory modules”Use only counters with electrical reset.The connection box is integrated in the module.
ORDER INFORMATION
Standard accessories
** **
Type 446/447
Type 446/447
Components 2001180 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Preset Revolution, Length Measuringor Stroke Counter
5-digit display Large 6.5 mm digits Button reset
Display 5-digit displayDigit height 6.5 mmElectrical connection rear strain relief 4-wire cable, approx. 30 cm longProtection class IP 40, connections IP 00
(EN 60529)General design DIN EN 61010-1
Protection according to class IContamination level 2Over voltage category II
Base plate burnished sheet steelCase die-cast metal, black varnishCap plastic (ABS), greyWeight approx. 800 gCounting mode – + subtracting in specified direction of rotation, adding in
reverse, stroke counter – subtracting in specified directionof rotation
Transmission ratio see "Order information"Speed 10000 increments/min, stroke counter 800 strokes/minActuating angle min. 38°, max. 55° (stroke counter only)Torque 1.2 Ncm, stroke counter 8.0 NcmReset button reset, secured against accidental operation
OutputSignal duration on transition from 00000 to 99999 until resetContact type single-pole changeover contactSwitching voltage max. 125 VDC/250 VACSwitching current max. 20 VA/0.3 A Don’t push the reset pushbutton during the process
TECHNICAL DATA
DIMENSIONS
Dimensions in mm
Type 250
181Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Actuation Transmis- Display Unit Bz Bw U G sion ratio
1:1 99999 0 250 001 0 250 002 – – 1:1 99999 – – 0 250 101 0 250 102 1:1 99999 – – 0 250 201 0 250 202 5:1 99999 m 0 250 013 0 250 014 – – 2:1 99999 m 0 250 019 0 250 020 – – 1:5 9999.9 m/dm 0 250 023 0 250 024 – – 5:1 99999 m – – 0 250 105 0 250 106 1:1 99999 0 250 301 0 250 302 – –
Stroke lever Ordering code 0 600 005
For other stroke levers, measuring wheels and installation frames see "Accessories"
ORDER INFORMATION
Revolution counter
Length counter
Stroke counter
CONNECTION DIAGRAM
Accessories
Type 250
blue
black
brown
yellow-green
Components 2001182 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Headline hierNotes
183Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Indicators
Indi
cato
rs
Typical applications:
Temperature display and monitoring
Voltage and current monitoring
Weight, force and tension display or monitoring
Recording of current andelapsed flow throughput
Measuring techniques Testing techniques Control rooms Service display PLC system error detection PLC display
Hengstler displays are designed to handle practically all analogue mea-suring tasks extremely well, with output and alarm functions for taskmonitoring. Data of all types can be pre-processed using the linear out-put or the RS 485 interface.
Using the PLC display, you can get visible access to your data at a lowprice.
Components 2001184 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
PLC and Process IndicatorsWith limit values
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
Temperature rangeInputsMeasuring range
ScanningAccuracyControl inputs
OutputsAlarms
Auxiliary voltage
Page
Integrated miniaturePLC indicator
8-digit LCD display or6-digit LED display
Clock and data signalcontrol (bit-serial)
Graphics or BCD mode Simple protocol Key evaluation
48 x 24 x 6045 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 6512-24 VDC
- 10-50 °C
PNP/NPN - adjustable
max. 1200 baud
Clock and data signals bit-serial
PNP max. 10 mA, as longas the key is pressed
186
Large dual-colour, 5-digit LED display ;digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Non-linear displayscaling up to 10points
Tare/offset function Alarm duration
indication Totalizing of process
values by integration
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VAC or 90-264 VAC0-55 °C
0/4 -20 mA; 10-50 mA0/2-10 V; 0/1-5 V;± 100 mV; ± 10 V100 ms0.01 %Programming lock or Tare function
2 transistor outputs1 relay (changeover)Optional: 2nd relay
24 VDC; max. 30 mA
190
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Free scaling Input range can be
trimmed Alarm length
indication Sensor break
detection after twoseconds
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC0-55 °C
J,T,K,N,B,R,S, PT 100
250 ms0.1 %Programming lock
2 transistor outputs1 relay (changeover contact)Optional: 2nd relay
190
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Free scaling Input range can be
trimmed Alarm length
indication Up to 600 V
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 5412-24 VDC; 24 VAC or100-240 VAC0-50 °C
100 mV…600 V1 mA…1A
250 ms0.1 %Programming lock
2 transistor outputs1 relay (changeover contact)Optional: 2nd relay24 VDC; max. 30 mA
190
Type tico 731 PLC Indicator tico 735 tico 735 tico 735 DC Process Indicator Temperature Indicator volt/amp Indicator
185Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Process Indicators with Limit Values
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
Temperature rangeInputsMeasuring range
Scanning frequencyAccuracyControl inputs
OutputsAlarms
Auxiliary voltage
Page
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Free scaling Alarm length
indication
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-25 VDC; 20-50 VAC, or 90-264 VAC0-55 °C
1 V … 600 V 1 mA…1 A
250 ms0.1 %Program lockout
2 transistor outputs1 relay (changeover contact)Optional: 2nd relay24 VDC, max. 30 mA
190
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange for alarm indication
2 alarms Upgradable options:
RS 485, linear output,digital input
Non-linear displayscaling up to 10points
Alarm length indication
Tare/offset function Total rate indication
by integration
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-25 VDC; 20-50 VAC or 90-264 VAC0-55 °C
1-100 mV ± 100 mV (under preparation)100 ms0.03 %Program lockout or Tare function
2 transistor outputs1 relay (changeover contact)Optional: 2nd relayBridge supply 5 V, or 10 V, 60 mA
190
Type tico 735 AC volt/amp. tico 735 measuring indicator bridge
Components 2001186 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
high contrast 8-digit LCD display or brilliant 6-digit LED display 2 different supply voltages available:
– independent of mains supply with lithium battery or – maintenance-free andenvironmentally friendly with 12-24 V DC supply
also high-voltage input 12-250 V AC/V DC up to 8 different functions for each standard model:
01 pulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh,hh)05 numerical display for the PLC (serial)06 bidirectional position indicator07 counter with differential mode08 maintenance counter (on request)
OVERVIEW
Flexible Counter Seriesin DIN size 24 x 48 mm
Standard Models Type 2 Type 4 Type 5
HardwareDisplay 8-digit LCD 8-digit LCD 6-digit LEDSupply voltage 12 – 24 VDC 12 – 24 VDC 12 – 24 VDCNominal data NV-FRAM NV-FRAM NV-FRAMretention > 10 years > 10 years > 10 yearsActive edge Clock PNP x xnegative or positive DATA NPNedge programmableAmplitude thresholds < 0.7 and < 0.7 and < 0.7 and
> 5 V, max. 30 V DC > 5 V, max. 30 V DC > 5 V, max. 30 V DC
Transmission rate 100 Hz 1 kHz 1 kHz Inputs Clock + Data Clock + Data Clock + DataMounting depth 32 mm 60 mm 60 mm
SoftwareImpulse counter x x xTachometer 1/min x x xTime counter h : 1/100 h x x xTime counter h : min : s x x xNumerical display for PLC x x xPosition indicator x xbi directionalCounter with differential mode xMaintenance counter
tico 731
187Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TYPE 2
LCD display DC supply voltage 12 – 24 V DC CLOCK-input for voltage signal
(positive 100 Hz)
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtective system (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 8-digit LCD, 7 mmSupply voltage Ub 12 ... 24 V DCCurrent consumption DC 12 ... 24 V DC < 5 mANominal data retention nonvolatile memory > 10 years
Inputs:Amplitude thresholds (CLOCK- and DATA-input)
< 0.7 V and > 5 V, max. 30 V DCActive edge/ CLOCK-input, PNP (100 Hz) active edge positiveCounting frequency DATA-input, NPN (100 Hz) active edge negative
Button no functionCounting frequency transmission rate for numerical display: 100 Hz
ORDER NUMBER
RESET: DATA-input NPN(negative)
Short case
Model tico 731
0 731 2 0 5Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC
S* *Option: with plug-in
screw terminals
DIMENSIONSCONNECTION DIAGRAM
DATACLOCK
Terminal assignment:
Dimensions in mm
tico 731
Clamping frame
Connecting terminal
tico 731
Components 2001188 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TYPE 4 LCD display 12-24 V DC supply voltage CLOCK- and DATA: programmable for
voltage signal (PNP positive or NPN negative, max. 1200 Baud)
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtective system (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 8-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 yearsCLOCK and DATA input:amplitude thresholds voltage input to 1200 Baud
< 0.7 V and > 5 V, max. 30 V DCActive edge/ programmed as voltage input:Counting frequency active edge positive, programmed as NPN-input:
active edge negative; 1200 BaudButton activate outputTransistor output PNP outputVoltage/switching current voltage supply minus 2 V; max. 10 mACounting frequency transmission rate for numerical display: 1 kHz
OUT: transistor output for frontbutton
Long case
ORDER NUMBER
DIMENSIONCONNECTION DIAGRAM
Model tico 731
0 731 4 0 5Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm::ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator
tico 731
Terminal assignment:D
ATA
Tr. o
ut
12-2
4 VD
C0
V
CLO
CKN
C
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
tico 007
189Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TYPE 5 LED display 12-24 V DC supply voltage CLOCK- and DATA: programmable
for voltage signal (PNP positive or NPN negative, max. 1200 Baud)
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtective system (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 6-digit LED, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 yearsCLOCK and DATA input:Amplitude thresholds voltage input up to 7.5 k 1200 Baud:
< 0.7 V and > 5 V, max. 30 V DCActive edge/ programmed as voltage input:Counting frequency active edge positive, programmed as NPN-input:
active edge negative; 1200 BaudButton activate outputTransistor output signal PNP outputVoltage/switching current supply minus 2 V; max. 10 mACounting frequency transmission rate for numerical display: 1 kHz
OUT: transistor output for frontbutton
Long case
ORDER NUMBER
DIMENSIONCONNECTION DIAGRAM
Model tico 731
0 731 5 0 5Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm::ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator07 counter with differential mode (1 kHz)
Terminal assignment:D
ATA
Tr. o
ut
12-2
4 VD
C0
V
CLO
CK
NC
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
tico 731
Components 2001190 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 735 Process Indicator with Dual-Colour Displayin DIN size 48 x 96 mm
COUNTING - MEASURING - INDICATING - MONITORING - TRANSMITTING
Because of the unlimited number of measurements it can handle, the tico 735 devicefamily is equally well suited to applications in the world of impulse and time coun-ting as to those in the processing area.If you are looking for display clarity and high levels of accuracy, then the tico 735is the right choice for you. The dual-colour display is unique, highlighting an alarmsituation or an excess value at a single glance. You can programs your own choiceof display colour to indicate normal or alarm conditions.
FEATURES Brilliant 18.5 mm high dual-colour red/green LED display with programmablecolour settings
As standard, all models have limit or preset values Scaling available as standard Universal Power Supply 90...264 V AC or 20...50 V AC/DC Simple structured operation with switchable help function
External Program Lockout DIN housing 48 x 96 mm, mounting depth < 100 mm Conveniently sized Screw Terminals Large keys offer safety and ease of operation
NPN and Relay Outputs High measurement rate Analogue versions can be user-calibrated according to BS 4937,
IEC 584 R ISO 9001 Option: Linear output 0/4-20 mA, 0/1-5 V, 0/2-10 V, 10 bit resolution Option: RS 485 ASCII protocol serial interface for all versions. ”Remote Display”
version receives process values over RS 485 Option: Control input for Tara function or program disable
tico 007
191Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Version OverviewProcess Indicators
Five digit display – Flexible Configuration - High Accuracy
Practically all analogue measurement tasks, particularly reliable process monitoring,can be solved with just 5 basic versions. Alarm and output functions can be pro-grammed to meet your requirements, enabling band alarm or limit values, with orwithout storage feature.
With the optional linear output, you can integrate the tico 735 into process visuali-sation or control systems as it can then function as a transmitter.
DC PROZESS
TEMPERATURE
DC VOLT/AMPS
AC VOLT/AMS (RMS)
STRAIN GAUGE
REMOTE DISPLAY
Evaluation, Features Value Ranges
High Accuracy 0.01 %Input Ranges programmable 0/4-20 mA, 10-50 mA, 0/2-10 V,
0/1-5 V, ±100 mV, ±1 V, ±10 VNon-Linear Scaling up to 10 points -19999...99999Process Offset Value -19999...99999Elapsed time of Alarm1 (Seconds) 0...99999Totalising of Process Values by interval seconds, minutes, hoursOption: Tare function -> Process Offset -19999...99999
High Accuracy 0.1 %Input Ranges programmable J, T, K, N, B, R, S, PT100Sensor break detection 2 seconds maxInput Range can be trimmed Range min to Range maxElapsed time of Alarm 1 (Seconds) 0...99999
High Accuracy 0.1%DC Volt range 100 mV...600 VDC Amps range 1 mA ...1 A, 2 A with shuntProcess Offset -19999...99999Elapsed time of Alarm1 (Seconds) 0...99999
AC Volt range 1 V...600 VAC Amps range 1 mA ...1 AProcess Offset -19999...99999Elapsed time of Alarm1 (Seconds) 0...99999
Input Range 0...100 mVAuxiliary Power Voltage programmable 5 V, 10 VNon-Linear Scaling up to 10 points -19999...99999Process Offset -19999...99999Elapsed time of Alarm1 (Seconds) 0...99999Totalising of Process Values by interval seconds, minutes, hoursOption: Tare function -> Process Offset -19999...99999
Process value via serial interface via RS 485 (ASCII)Alarm 1 and 2 monitored autonomously -19999...99999Min/Max stored automatically -19999...99999
tico 735
Components 2001192 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 735
10096
48
tico 735
PGM RST
DIMENSIONS
Technical data
Dimensions in mm
DISPLAY AND KEYBOARD
PHYSICAL
OPERATING CONDITIONS
APPROVALS
OPTION RS 485
OPTION LINEAR OUTPUT
Primary Display Red/Green, 7 segment LED, 5 digits, height 18.5 mmSecondary Display single digit 7 segment LED, height 7 mm, red/greenOutput Indicators 2 red LEDs for OUT 1 and OUT 2 statusKeyboard 4 rubber keys for programming and manual reset
Front Dimensions DIN 48 mm x 96 mm, 110 mm total depthMounting Front panel mounting (mounting bracket supplied)Panel Cutout 45+0.3 mm x 92+0.3 mm, panel thickness max 12 mmConstruction Front carrier with PCBs can be pulled outTerminals Screw Type (combination head)
Power Supply 90 - 264 V AC 50/60 Hz (electrically separated from all inputs and outputs) or 20...50 V AC / 22...55 V DC
Temperature Operation: 0 °C to +55 °C (32 °F to 131 °F)Storage: -20 °C to +60 °C (-4 °F to 176 °F)
Relative Humidity 0 to 90 %, non-condensing
Protection class Frontpanel IP 66CE EN 50082-1/92-95; EN 50081-1/92, -2/94Safety DIN EN 61010 part 1; protection according to class IIGeneral UL, CUL, Overvoltage cat. II, Contamination level 2
Type RS 485, serial asynchronous, Open ASCII, Master-Slave, up to 99 zones
Parameters 9600...1200 Bd, 1 start, 7 data, 1 stop, even parity
Insulation optically isolated, 250 V AC or 400 V DC from all inputs and outputs
Output Ranges 0-20 mA, 4-20 mA, 0-10 V, 2-10 V, 0-5 V, 1-5 VAccuracy ± 0.25 % (mA on 250 Ohms, V at 2 kOhm);
Deviation ± 0.5 %Resolution 8 bits after 250 ms (10 bits after 1000 ms typically)Updates approx. 4 per secondLoad mA: max 500 Ohm, V: min. 500 Ohm
193Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
129 8 7 6 5 4 3
10
11
12
13 14 15 16 17 18 19 20 21
22
23
24
RS 485B A + 0V Relay OUT1
LinearOutput
+
-
0V
OU
T1N
PN
~
Sens
orSu
pply
0V
~
Inputs
90-264 VAC
22-50 VDC/ACor
OU
T2N
PN
NC
RelayOUT2
NC
124 3
V+ I+I V-
T/C
PT 100
mA
mV
V
A
SenseStrainGauge
Input Details
S+ S-
+
Control input
General Common mode rejection > 120 dB at 50/60 Hz; Line voltage rejection > 140 dBSeries mode rejection up to 500 % of spanTemperature coefficient: ± 25 ppm / °C
Calibration according to BS 4937, NBS 125 and IEC 584 (all units are factory calibrated)
OUT1 NPN Open Collector; max 30 V DC; max 100 mA OUT2 NPN response time < 75 µsRelay 1, Changeover (Form C); 240 V AC / 3A or 110 V AC / 5 A; pull-in Relays 2 (opt.) time 8 msAuxiliary Power 24 V DC, 30 mA max
for strain gauge: 5 V DC or 10 V DC, 60 mA max
NPN High ≥ 3.0 V or open, Low < 2.0 V; 4.7 kOhm to V+ reponse time 25 ms
Programmable display colour for normal and alarm operation Alarm programmable as high or low; can be deactivated or blocked Output signals programmable; can be inverted and/or stored Process offset Display filter programmable up to 100 sec. Tare function and non-linear scaling with 0735 A2 and 0735 A6 Optional Linear Output Optional Tara function or program disable
Technical data
SIGNAL INPUTS
OUTPUTS
OPTION CONTROL INPUT(not with Option RS 485)
SPECIAL FEATURES
TERMINALS
Type 0735 A
Function1 Temperature2 DC Process3 AC Volt/Ampere5 DC Volt/Ampere6 Strain Gauge7 Remote Display
Power Supply0 90…264 V AC2 20…50 V AC or
22…55 V DC
Output Relay 20 none1 with Relay 2
Interface0 none5 with RS 4856 Digital Input
Linear Output0 none3 with 4-20 mA
0 7 3 5 A
ORDERUNG DATA
Option module Ordering codeRelay 2 1 901 001Linear output 1 901 003RS 485 interface 1 901 004Digital input 1 901 005
tico 735
Notes
Components 2001194 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
195Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Time counters / Time relays
Tim
ers
/Ti
mer
rel
ays
Typical applications:
Operating hours recording Service time counting Service life tests Maintenance interval counter Time control Time delays After run control Pulse shaper Timed on and off switching
Shorttime measurement andmonitoring up to 1 ms
Sports timing Throughput time control Curing time control Mixing process control Oven control Light control Machine runtime recording
Time counters show how long equipment, machines and other deviceshave been switched on. They show information about elapsed warrantytime, usage and whether it’s time to carry out maintenance work. Wealso have a range of time preset counters in our program for use withtime based controllers.
As a further option, we offer a line of modern, well designed Time relayswith a wide range of programming options
Components 2001196 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput control
Time format
Measuring principle
Reset input
Control inputs
Output
Page
Small, compact,5 different versions
Voltage supply via lithium cell or 12-24 VDC
8-digit LCD or 6-digit LED display
Two versions with different time rangesfor each type
High-voltage versionfor 12-250 VDC/ACinput pulses
Optional with outputsignal for use asmaintenance counter
48 x 24 x 32 short48 x 24 x 60 long45 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 65Li battery, type 1+3,12-24 VDC
PNP/NPN, type 3 with 12-250 VDC/AChhhhhh.hh; hhhh:mm:ss;(LCD)hhhh.hh; hh:mm:ss (LED)
Accumulated measurement;Pulse-width
NPN type 1+2, type 3 with 12-250 VDC/AC; NPN/PNP Type 4-5Optional: Keylock or Display hold inputOptional as transistorPNP or display
202
t
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Offering a variety ofprogrammable functions
Without or with 1 or 2 presets
Offering many adju-stable time ranges
Resolution up to 1 ms Programmable
keyboard lockout Integrated sun
totalizing counter
48 x 48 x 93.5
45 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPN
Sec, min, hours, decimalpoint up to 0.000 or programmable formathh:mm:ssAccumulated or single-pulse measurement;Pulse-width or period durationPNP/NPN
2nd counter input and display inputWithout, or with 1 or 2 relays and transistor outputs
209
Totalizing counterwith large6-digit LCD display;illuminated
4 different programmable timeranges
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions of thesame design are offering different functions
72 x 36 x 36
68 x 33LCD 6-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPN
ssssss; mmmmm.m;hhhhh.h; hh:mm:ss;programmable
Accumulated measurement;Pulse-width
NPN
Keylock input
Optional as SSR output
212
Type tico 731 tico 732 tico 734 006
197Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)No. of digits/
Digit heightProtectionPulse voltage
Power consumptionReset
Operating temperature
Time formatAccessories
Dimensions (mm)(including panel frame)Cutout (mm)(including panel frame)
Page
7-digit display Without reset
function DIN dimensions
48 x 24; 48 x 48 and72 x 72 via adapterframe
Low-cost Screw-type terminal
connections
48 x 24 x 40.5
45 x 22.57
5 mm (visual)IP 6612-36 VDC; 24 VAC;115 VAC; 230 VAC; further voltages availableas optionsDC 0.75 W; AC 0.7 VANone
- 10…50 °C
hhhhh.hhPanel frame adapter
54 x 29; 48 x 48; 52 x 52;72 x 72; D 73; D 5850 x 25; 45 x 45; D 50;68 x 68; D 50; D 50
215
7-digit display Without reset
function DIN-rail mounting Compact design Low-cost Screw-type terminal
connections
48 x 70 x 49
7
5 mm (visual)IP 6612-36 VDC; 24 VAC;115 VAC; 230 VAC; further voltages availableas optionsDC 0.75 W; AC 0.7 VANone
- 10…50 °C
hhhhh.hh
217
6- or 7-digit display Manual reset function
or without reset function
Plugs into modularsystem 400
Easy to service
50 x 25 x 75.5
50 x 256 or 7, depending on version4 mmIP 4012 VDC; 24 VDC; 24 VAC; 115 VAC; 230 VAC; depending on versionApprox. 1 VANone; manual - depending on version- 10…50 °C;
hhhh.hh or hhhhh.hhPanel frame, connection box60 x 50 x 88
55 x 29.5
219
Small building dimensions
Low power consumption
Standard connections Suitable for PCB
mounting Machine-solderable
and washable High shock resistance
25.2 x 31 x 14.630 x 20 x 4027 x 14.2; only .87
4 mm (visual)IP 655; 12; 24 VDC
Approx. 30 mWNone
- 10…50 °C; optional - 40…+ 85 °Chhhhh.hh
221
Type Type 891 Type 891 DIN Type 478 Type 633 DC
Components 2001198 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digitsDigit heightProtectionPulse voltage
Power consumptionOperating temperatureTime formatAccessories
Page
Suitable for DIN-railmounting
Suitable for installation in switching cabinets
Screw-type terminalconnections
Without reset function
Low power consumption
25.5 x 68.5 x 28
74 mm (visual)IP 105, 12 or 24 VDC, depending on versionApprox. 250 mW0…60 °Chhhhh.hh
223
Small AC voltagemeter
Low power consumption
Simple installation Protection class IP 65 Screw-type terminal
connections or cableconnections
30 x 20 x 5627 x 14.464 mm (visual)IP 6624, 115, 230 VAC
0.08 -1 VA- 10…50 °Chhhhh.hPanel frame
224
Type Type 633 DIN Type 633 AC
199Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Preset Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlTime format
Measuring principle
Reset inputControl inputsControl inputsOutput
Page
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24 VDC; 115 VAC,or 230 VAC
6-digit LCD or LEDdisplay
Variety of programmable functions
Without presets orwith 1 or 2 presets
Variety of adjustabletime ranges
Resolution up to 1 ms Programmable
keyboard lock Integrated sum
totalizing counter
48 x 48 x 93.545 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mmIP 6512-24 VDC, 115 VAC, 230 VAC versions
PNP/NPNSec., min, hours, withdecimal point up to0.000; or programmableformat hh:mm:ssAccumulated or single-pulse measurement;Pulse width or period durationPNP/NPNDisplay hold inputDisplay buffer inputWithout, or with 1 or 2 relays and transistor outputs
226
Totalizing counterwith large, 6-digitLCD display; illuminated
Different time, 4 ranges programmable
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 3668 x 33LCD 6-digit, 12 mm
IP 65Exchangeable Li battery
PNP/NPNssssss; mmmmm.m;hhhhh.h; hh:mm:ss; programmable
Accumulated measurementPulse width
NPNKeylockKeyboard lockAs SSR output
229
Large dual-colour, 5-digit LED display;digit height 18.5 mm
Programmable displaycolour
Different time, 5 ranges programmable
Upgrading options(e.g. RS 485)
Service-friendly dueto plug-in system
Complete functions by8 counter versions and5 process indicators
96 x 48 x 10092 x 45LED 5 digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC
PNP/NPNssss.s; mmmm.m;hhhh.h; mmm.ss;hhh.mm; programmable
Accumulated or single-pulse measurementPulse width
NPNKeylockKeyboard lock1 relay and transistoroutput
232
Type tico 732 tico 734 008 tico 735P6
Components 2001200 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Preset Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)No. of digitsDigit heightProtectionPulse voltage
Power consumptionResetOperating temperatureTime formatAccessories
Dimensions, including panel frame (mm)Front panel cutout (mm)
Page
Adding preset timecounter
5-digit display withpermanently visiblepreset
Manual reset Display up to 9999.9
hours Plugs into modular
system 400 Easy to service
50 x 50 x 92.550 x 5054 mmIP 4024 VDC, 24, 115, 230 VAC1 VA / WManual- 10…50 °Chhhh.hPanel frame, connection box60 x 75 x 88
55 x 55
235
Adding preset timecounter
5-digit display withpermanently visiblepreset value
Manual reset Front panel size
55 x 53.2 Display up to 999.99
hours Compact design
55 x 53.2 x 72.552 x 5254 mmIP 4024 VDC or 230 VAC
1 VA / WManual- 10…50 °Chhh.hh
237
Type Type 489 Type 888
201Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Time Relays
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsInput controlTime ranges
Functions
Reset inputInhibit inputOutput
Page
Dial for convenientand fast adjustmentof values
Programming via DIPswitches
Front-panel or DIN-rail mounting
Functions:On-delay; Off-delay; Bounce contact;clock generator
48 x 48 x 8145 x 45Dial and LED for the timing processIP 6512-24 VDC and 24-240 VAC
NPN or contact1 s; 10 s; 1 min;10 min; 1 hour; 10 hours; adjustable
On-delayOff-delayBounce contactClock generator
NPN or contact---2 relays as time change-over contacts
239
Convenient keyboardoperation
Dual-line LCD display Resolution up to 0.01
sec. Front-panel or DIN-
rail mounting Functions:
On-delay; Off-delay; Bounce contact;clock generator withstart signal
48 x 48 x 8145 x 45LCD 4-digit, dual-line
IP 6524 VDC and 24-240 VAC
NPN or contacthhhh; mmmm; ssss;hh:mm; mm:ss; withdecimal point up to 0.01 for h; m; s rangeOn-delayOff-delayBounce contactOff-delay bounce relayClock generator withstart signal
NPN or contact---2 relays as changeover contacts or with instantaneous contact
239
3 different base versions
Easy operation Dual-line LED display Resolution up to
1 msec Front-panel or
DIN-rail mounting Functions: "High
performance" with 17 different operatingmodes; "asymmetricalclock generator" withbatch counter and 2 separate presets;"Multifunction" as fortico 741
48 x 48 x 8145 x 45LED 4-digit, dual-line
IP 6522-55 VDC / 20-50 VACor 90-264 VAC
NPN or contacthhhh; mmmm; ssss;hh:mm; mm:ss;with decimal point up to 0.001 at h;m;s range"High Performance" with 17 different operating modes; "asymmetrical clock generator" with batch counter and separate input; "Multifunction" as for tico 741NPN or contactNPN or contact2 relays or 2 transistors;separately programmable
243
Type tico 740 tico 741 tico 742
Components 2001202 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
high contrast 8-digit LCD display or brilliant 6-digit LED display different supply voltages available:
– independent of mains supply with lithium battery or – maintenance-free and environmentally friendly with 12-24 VDC supply
also high-voltage input 12-250 VAC/VDC up to 8 different functions for each standard model:
01 Pulse counter02 Tachometer (1/min)03 Time counter (display in hhhh:mm:ss)04 Time counter (display in hhhhhh,hh)05 Numerical display for the PLC (serial)06 Bidirectional position indicator07 Counter with differential mode08 Maintenance counter (on request)
Flexible Counter Seriesin DIN size 24 x 48 mm
tico 731
OVERVIEW
Standard Models Type 1 Type 2 Type 3 Type 4 Type 5
HardwareDisplay 8-digit LCD 8-digit LCD 8-digit LCD 8-digit LCD 6-digit LEDSupply voltage Lithium battery 12 – 24 VDC Lithium battery 12 – 24 VDC 12 – 24 VDCNominal data 7 years NV-FRAM 7 years NV-FRAM NV-FRAMretention > 10 years > 10 years > 10 yearsActive edge x x x x xnegative or positiveedge programmableAmplitude thresholds < 0.7 and < 0.7 and < 3 V and < 0.7 and < 0.7 and
> 5 V, max. 30 V DC > 5 V, max. 30 V DC > 12 V > 5 V, max. 30 V DC > 5 V, max. 30 V DCmax. 250 V DC/AC
Counting frequency max. 7.5 kHz or max. 7.5 kHz or 20 Hz max. 7.5 kHz or max. 7.5 kHz orprogrammable 30 Hz attenuated 30 Hz attenuated 30 Hz attenuated 30 Hz attenuatedControl inputs Reset and Keylock Reset Reset and Keylock Reset and Reset and
application input application inputKeylock external input programmable external input programmable programmableMounting depth 32 mm 32 mm 60 mm 60 mm 60 mm
SoftwareImpulse counter x x x x xTachometer 1/min x x x xTime counter h : 1/100 hx x x x xTime counter h : min : s x x x x xNumerical display for PLC x x xPosition indicator x xbi directionalCounter with differencial mode xMaintenance counter (on request) x
203Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
LCD display lithium battery COUNT: programmable start input
for voltage signal or contact, frequency 30 Hz
RESET: reset input with contact(negative, 30 Hz)
KEYLOCK: locking of the reset key short case
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 8-digit LCD, 7 mmSupply voltage Ub internal lithium batteryNominal data retention lithium battery: 7 years
Inputs:Amplitude thresholds voltage input up to 30 Hz:
< 0.7 V and > 5 V, max 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 30 Hz (attenuated for contacts)
Control inputs:reset - manual reset via keyboard (can be locked)
- external reset with static behaviour, active edge negativeReset lock – by means of bridge on keylock input to 0 V
TYPE 1
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
Terminal assignment:
Dimensions in mm
Clamping frame
Connecting terminal
tico 731
0 731 1 S0 3
Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)
* * Option: with plug-inscrew terminals
0 731 1 0 4
Model tico 731
tico 731
Components 2001204 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Model tico 731
0 731 2 S0 3Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PC
* * Option: with plug-inscrew terminals
0 731 2 0 4
ORDER NUMBER
tico 731 Technical data
TYPE 2
LCD display DC supply voltage 12 – 24 V DC COUNT: programmable start input
for voltage signal or contact, frequency 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 8-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 5 mANominal data retention nonvolatile memory > 10 years
Inputs:Amplitude thresholds voltage input up to 30 Hz:
< 0.7 V and > 5 V, max 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 30 Hz (attenuated for contacts)
Control inputs:Reset - manual reset via keyboard (can be locked)
- external reset with static behaviour, active edge negativeattenuated 30 Hz
Reset lock programmable via front key
RESET: reset input with contact(negative, 30 Hz)
short case
DIMENSIONSCONNECTION DIAGRAM
DATACLOCK
Terminal assignment:
Dimensions in mm
tico 731
Clamping frame
Connecting terminal
205Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
LCD display Lithium battery COUNT: Start input for voltage
pulses 12-250 V AC/DC (20 Hz)
RESET: reset input for voltage pul-ses 12-250 V AC/DC (20 Hz)
KEYLOCK: locking of the reset key long case
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 8-digit LCD, 7 mmSupply voltage Ub internal lithium batteryNominal data retention lithium battery: 7 yearsCurrent consumption DC lithium battery: 7 years
Inputs:Amplitude thresholds high voltage input 20 Hz:
< 3 V and > 12 V, max. 250 V DC/ACActive edge voltage input positive edgeCounting frequency 20 Hz
Control inputs:Reset - manual reset via keyboard (can be locked)
- external reset with static behaviour, positive circuitReset lock by means of bridge on the keylock input
ORDER NUMBER
TYPE 3
DIMENSIONSCONNECTION DIAGRAM
Typ tico 731
0 731 3 0 3
Software function01 impulse counter or03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)
0 731 3 0 4
Terminal assignment:
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
tico 731
tico 731
Components 2001206 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TYPE 4 LCD display 12-24 V DC supply voltage COUNT: programmable start input
for voltage signal or contact, frequency 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 8-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 yearsCount input:Amplitude thresholds voltage input up to 30 Hz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 30 Hz (attenuated for contacts)Control inputs:Reset – manual reset via keyboard (can be locked)
– external reset with static behaviour, 30 Hz attenuatedsame edge as with count input
Input 2: Display HoldReset lock programmable via front keyTransistor output signal PNP outputVoltage/switching current voltage supply minus 2 V; max. 10 mA
INPUT 2: control input fortemporary hold of display value(Hold)
RESET: reset input OUT: transistor output for preset
signal Long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
Model tico 731
0 731 4 0 3Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator
0 731 4 0 4
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
Technical data
TYPE 5 LED display 12-24 V DC supply voltage COUNT: programmable start input
for voltage signal or contact, frequency 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0,6 x 22 + 0,3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIInput resistance < 50 kOhm (static)Display 6-digit LED, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 years
Count input:Amplitude thresholds voltage input up to 30 Hz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 30 Hz (attenuated for contacts)
Control inputs:Reset – manual reset via keyboard (can be locked)
– external reset with static behaviour, 30 Hz attenuatedsame edge as count input
Input 2: Display HoldReset lock programmable via front keyTransistor output signal PNP outputVoltage/switching current supply minus 2 V; max. 10 mA
INPUT 2: control input fortemporary hold of display value(Hold)
RESET: reset input OUT: transistor output for preset
signal Long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
Model tico 731
0 731 5 0 3 Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator07 counter with differential mode (1 kHz)
0 731 5 0 4
207Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mm Clamping frameConnecting terminal
tico 731
tico 731
Components 2001208 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Special functions
SPECIAL FUNCTIONS
ORDER NUMBERSPECIAL VERSIONS
To best match your application, you can order special functions such as prescalervalue, decimal point and preset value, which are permanently set by us before deli-very. With the variable prescaler value you can adapt to already existing transferratios of your application. Small resolutions can be shown with the decimal point, e. g. for the position indicator or the tachometer. A special feature is the possibility of displaying an information text in the display,e. g. for the surveillance of maintenance cycles. In this case the desired informationis shown in the display after reaching the fixed preset value. You can display any textthat can be created with the 7-segment alphabet, e. g. STOP, HELP, FILTER etc.
ORDER NUMBERSPECIAL VERSIONS
Special functions Impulse Tacho- Time Numerical Position Counter withfor counter meter counter display indicator differential work
Prescaler value x x x x0,001 bis 99,999Decimal point x x x x0 to 3 positionsbehind the commaPreset value x x0 to 99 999 999Information text x x(on reaching thepreset value)LCD = 8 charactersLED = 6 characters
1) not available for standard type 3
2) not available forstandard types 1, 2, 3
3) only available forstandard type 5
Model tico 731
0 731 7
Standard version:1 Standard model 12 Standard model 23 Standard model 34 Standard model 45 Standard model 5
Function:1 Impulse counter2 Tachometer (1/min)1)
3 Time counter (hhhh:mm:ss)4 Time counter (hhhhhh.hh)6 Position indicator (2-channel)2)
7 Counter with differential mode3)
4) not available for time counters5) not available for tachometers
and position indicator
P: (Value);
D: (Value);V: (Value);T: (Text);
Choose version and basic function:
Please state the desired special version on your order:
Prescaler value: 0.001 to 99.9994)
Decimal point: 0 to 3 positions after the comma4)
Preset value: 0 to 99 999 9995)
The information text displayed on reaching the preset value can be built up as required from the 7-segment alphabet
S* Option: with plug-in
screw terminals only for standard model 1, 2*
209Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Bi-directional Multifunctional-Counter
high-contrast LED or LCD-Display, 6 digits small and compact DIN dimensions 48 x 48 mm easy operation by one key per digit direct access to parameters available with 1 or 2 presets transistor and relay with changeover contact, for each preset with integrated separate totalizer 5 basic functions easily programmable: counter, tachometer, time counter, shift
counter and batch counter display range from – 99999 to 999999
F1 F2 PSC PRG F1 F2 PSC PRG
F1 PRG PRGF2 PRGPSC
Reset
R 46
E
E
E
5 E 6
E
E
E
32E
E
1E
count mode
programming mode
and POWER ON and POWER ON
> 5 sec
preset 1 preset 2 prescaler function-parameter e.g. Basic-function*
count modedecimalpointreset/set-modesignal lengthpnp/npn-selectionreset modeoutput memorytime counter-tachometerkeylock for:manual resetpreset 1 or 2prescaler
* only formultifunction version
countertachometertime countershift counterbatch counter
PROGRAMMING
The important values, preset 1, preset 2, prescaler and separate totalizer can be direc-tly selected. It is necessary only to press the relevant button and the E-buttontogether. To make the operation still more easy, access to those values can be lockedseparately. All other system parameters like operation and count modes are laid downin a common operation level. These parameters are usually programmed once onlyduring the first initiation.
tico 732
Components 2001210 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Display LED or LCD, 6 digits, leading zero suppression, decimal pointDigit height LED 7,6 mm; LCD 9 mmSupply voltage 12...24 VDC; VAC; 115 VAC; 230 VAC; 50/60 Hz,
depending on versionCurrent consumption 12...24 VDC < 150 mA
100/115/230 VAC < 50 mA; including sensor supplySensor supply only when AC operated: 12 ... 30 VDC, max 50 mAData retention non-volatile memory > 10 yearsOperating temperature 0 ... +50 °CStorage temperature - 20 ... + 70 °CElectrical connection screw terminalsMounting with clamping frameProtection class (IEC 144) front side IP 65, terminals IP 20Vibrostability 10 m/s2 (10...150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to VDE 0411, DIN 57411, protection class IIApprovals UL + CUL E 96337Amplitude thresholds < 2 V and > 8 V, max 40 VDCActive edge programmable; positive with pnp input; negative with npn inputPulse shape any (squarewave 1:1 for max. frequency)Input resistance approx. 10 kOhm (static)Counting frequency max. 5 kHz (2.5 kHz bi-directional)Prescaler programmable from 0.001 to 9.999 (999.999)Count inputs A, B - phase discriminator with single evaluation
- differential mode (add/sub)- count direction mode- totalizing mode (add/add)
Pulse length min. 17 ms (30 Hz), 100 µs (5 kHz)Control input C - manual reset possible
- external reset, static or dynamic, programmable,pulse length > 5 ms
- automatic reset when main preset has been reached (programmable)
Relay changeover contact max. 250 VAC / 30 VDC, min. 5 V AC/DCmax. 1 A, min. 10 mA, delay < 5 ms
Transistor pnp output 12...24 VDC max 10 mA of DC supply; 12 … 30 V DCmax 10 mA of AC supply
Method time interval (1/Tau)Display range 1/min or 1/secMin input frequency 0.125 Hz = 8 secAlarms 2 alarms with programmable start-up-suppressionTime bases programmable; sec, min., h or hh.mm.ssResolution programmable 1; 0.1; 0.01; 0.001 (on sec = 1 ms)Function single pulse measurement (short time meter) or cumulated
counting (hour meter)Count mode pulse width or period measurement (start-stop)
DIMENSIONS
tico 732
TECHNICAL DATA
General
Counter
Tacho
Time-counter
Dimensions in mm
clamping frameplug terminal
211Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 732
Display Preset 12–24 VDC 24 VAC 115 VAC 230 VAC
LCD – 0 732 000 0 732 071 0 732 037 0 732 001LCD 1 0 732 002 0 732 073 0 732 039 0 732 003LCD 2 0 732 012 0 732 078 0 732 049 0 732 013LED – 0 732 018 0 732 080 0 732 055 0 732 019LED 1 0 732 020 0 732 082 0 732 057 0 732 021LED 2 0 732 030 0 732 087 0 732 067 0 732 031
Important: only versions with 2 presets or without preset can be used as tachometers.
ORDER INFORMATION
Display
LCD
LED
Function
Tacho
Shift counter*
Batch counter*
no output
1 output(1 relay,1 transistor
2 outputs(2 relays,2 transistors)
12 - 24 VDC
230 VAC
Outputs Power supply
Counter +totalizer
100 VAC
115 VACTimecounter +totalizer
CONNECTING DIAGRAM
POSSIBLE VARIANTS
Multifunctional version: Article No.: 0 732 0 B
For versions with no output, pins 7–9 and 15-17 are not connected.
VDC 1 Rel/1 Trans
VDC 2 Rel/2 Trans
VAC 1 Rel/1 Trans
VAC 2 Rel/2 Trans
Components 2001212 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
LCD display, 8 digits, 12 mm height, excellent contrast through Backlighting with a 10-28 VDC supply Lithium battery power supply Decimal point, input scaling, count direction, output mode, etc. programmable,
depending on model Programming reduced to a minimum for easy handling and set-up CE approval, IP 65, NEMA 4 Suitable for TTL Mounting depth 29 mm
MODEL OVERVIEW
Flexible Counter Seriesin DIN size 36 x 72 mm
The family tico 734 consists of ten models:
0 734 000 Totalizer without scaling0 734 001 Add/Subtract totalizer0 734 002 Position indicator0 734 003 Tachometer0 734 004 Programmable rate meter0 734 005 Rate meter with totalizer0 734 006 Time counter0 734 007 Preset counter0 734 008 Time preset counter0 734 009 Rate meter 005; with total and pulsed output
Verwendbare Optionsmodule: 1 734 010 … 020
tico 734
4 Remote reset, NPN3 Timing Enable, NPN
or dry contact2 Not used1 0V, Common5 Program enable6 Not used7 Not used8 DC-supply for backlightingSuitable option modules: 1 734 0.. 10, 12, 14, 17, 19
Elapsed Time Indicator (0 734 006)6 digit, display format: 999999s,99999.9m, 99999.9h, hh:mm:ss, reset key can be enabled/disabled
4 Remote reset, NPN3 Timing Enable, NPN or dry contact2 Not used1 OV, Common5 Program enable6-7 Output SSR (Form A)8 DC-supply for backlighting
Preset Timer (0 734 008)6 digit, display format: 999999s,99999.9m, 99999.9h, hh:mm:ss, programmable for up or down counting, SSR output programmablefor on-delay or interval, reset key can be enabled/disabled, preset lock function Suitable option modules: 1 734 010 … 20
213Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 734
Internal Single or dual lithium 3 V battery (CR 1/2 AA), typical lifetime of 5 years (10 yrs w/2 batteries). „Lo BAT“ display flashes approximately 2 weeks prior to end of battery life.
via Option Module 120/240 VAC provides 12 VDC for display backlighting Display LCD, 12 mm height, 8 digits Backlighting Whole display area can be backlit with a 10-28 VDC supply,
green-yellow colourHigh Speed Input (2) PNP, ≤ 28 VDC, max. 10 kHz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impulse > 45 µs, impedance 1 MΩLow Speed Input (3) NPN, ≤ 28 VDC, max. 30 Hz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impedance 1 MΩHigh Voltage Option 100..260 VAC/DC, 30 Hz, 1 MΩ, with internal Module connection to input (3)Low Voltage Option 5..30 VAC/DC, 30 Hz, 17 kOhm, with internal connection Module to input (3)Enable Input (5) NPN, ≤ 28 VDC, level sensitiveReset Input (4) NPN, ≤ 28 VDC, edge triggered, max. 30 Hz (50 % duty cycle)SSR Relay Photomos relay, 0.1 A, 30 VAC/DC, reaction time < 5 msRelay Option Module Changeover contact 5 A, 120/240 VAC or 30 VDCMounting Front panel mounting with mounting bracketDimensions DIN 36 x 72 mm, 36 mm total depth, total width 83 mmPanel Cutout 33+0,3 mm x 68+0,3 mm, depth behind panel < 29 mmPanel Thickness max. 8 mmFront Panel Rating IP 65 / NEMA 4Operating and Storage 0 °C to + 55 °CTemperature - 20 °C to + 60 °CGeneral DIN EN 61010 part 1 / VDE 0411 part 1
Protection according to class II, Contamination level 2 Overvoltage category II
Control Inputs
Output (only 008)
Physical
Environmental
Count Inputs
Display
Power Supply
A: gasket, B: mounting bracketincl. option modul
DIMENSIONS
Dimensions in mm
1) Panel cutout: 33 x 68 mm2) Panel thickness: max 8 mm
Components 2001214 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
FUNCTIONS OVERVIEW
tico 734 Technical data
Power 115 VAC or 230 VAC (see wiring), frequency 50/60 Hz. Terminal (8) provides Supply (E-H) an unregulated 10-20 VDC supply for powering sensors up to 50 mARelay Type: SPDT (Form C) mechanical relay; Operate Time: 6 msOutput 5A, 120/240 VAC or 30 VDC, silver alloy(A-B-J) Electrical Life: > 500 000 operations, Mechanical Life: > 10 million operationsHigh Voltage Range: 100 to 260 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 200 kOhmLow Voltage Range: 5 to 30 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 17 kOhmMounting Attaching on back of instrumentDimensions 42 x 69 mm, depth 58 mm, total depth behind panel with instrument 82 mmTemperature Operating: -0° C to +50° C; Storage -20° C to +60° C;General DIN EN 61010 part 1, Protection according to class II
Contamination level 2; Overvoltage category II
OPTION MODULES
With the Option Modules, the tico 734 can be functionally extended and adaptedto special application conditions. The following option functions are available: AC power supply providing sensor supply 10-20 VDC / 50 mA and 12 V supply
for display backlighting (supports the battery in models with SSR output) Relay output, changeover contact, 5 A, 120/240 VAC or 30 VDC High voltage input (100..260 VAC/DC, max. 30 Hz, 200 KΩ)
Connections 010 011 012 013 014 015 016 017 018 019 020
High Voltage Input C-D x x x xRelay 1 x change over A-B-J x x x x x x AC power Supply E-F, G-H x x x x x xLow Voltage Input C-D x x x x
1734 …
TECHNICAL DATA
WIRING
ORDERING INFORMATION Panel Instruments
Totalizer 0 734 000Add/Subtract Totalizer 0 734 001Position Indicator 0 734 002Tachometer 0 734 003Programmable Rate Meter 0 734 004Rate Meter with Totalizer 0 734 005Elapsed Time Indicator 0 734 006Preset Counter 0 734 007Preset Timer 0 734 008Rate Meter with Total 0 734 009and Pulsed OutputLithiumbattery E3533 355
Option Modules
HV Input 1 734 010Relay 1 734 011AC Power 1 734 012HV Input and Relay 1 734 013HV Input and Power 1 734 014Power and Relay 1 734 015HV Input/Power/Relay 1 734 016LV Input 1 734 017LV Input and Relay 1 734 018LV Input and Power 1 734 019LV Input/Power/Relay 1 734 020
All modules contain 17 terminals. Theexact functions that are present aredetermined by the model of instrumentand option module (see Functions Over-view).1-8 Connection to instrument
(refer to appropriate operatinginstructions)
A Normally Open Relay ContactB Relay CommonJ Normally Closed Relay
ContactC-D High or Low Voltage Input, no
polarity, (provides NPN signal on terminal 3)
E-F 115 VAC Line winding IG-H 115 VAC Line winding II
215Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Time Counter with DIN Dimensions for AC and DC Operation
Low-cost DIN dimensions 24 x 48 mm, 48 x 48 mm or 72 x 72 mm Highly legible display Simple installation No reset
TECHNICAL DATA
CONNECTION DIAGRAM
Display 7-digit, 0 ... 99999.99 hDigit height 5 mm, visualSupply voltage Vop acc. to order information + 10 % (230 VAC + 15 %)Power consumption 0.7 VA or max 750 mW on DCOperating temperature - 10 ... + 50 °CStorage temperature - 20 ... + 70 °CEl. connection screw terminals for cables of max. 2.5 mm2
and AMP connector 6.3 x 0.8 mmMounting with clamping frame (Ordering code 2 891 016)Mounting position roller axis horizontalProtection class (IEC 144) front IP 66; screw terminals IP 20, AMP connectors IP 00Vibrostability 30 m/s2 (10 ... 500 Hz) acc. to IEC 068-2-6Shock stability 800 m/s2 (6 ms) acc. to IEC 068-2-27General design acc. to DIN VDE, part 1, protection according to class II,
Contamination level 2; Overvoltage category IIWeight approx. 50 gApprovals UL: E 130453 (M), CSA (only AC version)Reset none
Type 891
VDC+ 0V
DC
AC
M
VAC
M
+
Components 2001216 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONSCounter
Installation frame
Technical data
ORDER INFORMATIONCounter
Installation frame Frame SealSize Installation cutout Ordering code Ordering code
A 54 x 29 mm 50 x 25 mm 2 405 218 2 405 232 B 48 x 48 mm 45 x 45 mm 2 405 219 2 405 233 C 52 x 52 mm 50 mm 2 405 220 2 405 234 D 72 x 72 mm 68 x 68 mm 1 405 672 2 405 235 E 73 mm 50 mm 2 405 223 2 405 237 F 58 mm 50 mm 2 405 224 2 405 236
Seal: Ordering code 2 405 231 (0.5 mm)
(62,5 bei DC)
Voltage Max. power consumption Ordering code external resistor
12… 36 VDC 350 mW 0 891 33140… 60 VDC 620 mW 0 891 331 + 6,8 kΩ/1 W80…125 VDC 1100 mW 0 891 331 + 15 kΩ/1 W
Voltage Power 50 Hz 60 Hz consumption Ordering code Ordering code
24 VAC 0.1 VA 0 891 201 0 891 202115 VAC 0.6 VA 0 891 203 0 891 204 230 VAC 0.7 VA 0 891 211 0 891 206100 VAC 0.,3 VA 0 891 213 0 891 214200 VAC 0.7 VA 0 891 215 0 891 216
Type 891
Dimensions in mm
tico 007
217Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Time Counter for Surface Mounting, Suitable for AC and DC Operation
Low-cost DIN rail attachment Highly legible display Simple installation No reset
CONNECTION DIAGRAM
Display 7-digit, 0 ... 99999.99 hDigit height 5 mm, visualSupply voltage Vop acc. to order information + 10 % (230 VAC + 15 %)Power consumption 0.7 VA on AC - 750 mW on DCOperating temperature - 10 ... + 50 °CStorage temperature - 20 ... + 70 °CEl. connection screw terminals for cables of max. 2.5 mm2
and AMP connector 6.3 x 0.8 mmMounting with screws or on DIN railMounting position roller axis horizontalProtection class (IEC 144) front IP 66; screw terminals IP 20, AMP connectors IP 00Vibrostability 30 m/s2 (10 ... 500 Hz) acc. to IEC 068-2-6Shock stability 800 m/s2 (6 ms) acc. to IEC 068-2-27General design acc. to DIN VDE, part 1, protection according to class II,
Contamination level 2; Overvoltage category IIWeight approx. 50 gReset none
Type 891
TECHNICAL DATA
VDC+ 0V
DC
AC
M
VAC
M
Components 2001218 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 891 Technical data
DIMENSIONSCounter
ORDER INFORMATIONCounter
Voltage Power Voltage Ordeiring codeconsumption tolerance
24 V 50 Hz 0.1 VA ± 10 % 0 891 50124 V 60 Hz 0.1 VA ± 10 % 0 891 502
115 V 50 Hz 0.6 VA ± 10 % 0 891 503115 V 60 Hz 0.6 VA ± 10 % 0 891 504230 V 50 Hz 0.7 VA ± 15 % 0 891 511
12- 36 V DC max. 550 mW ± 10 % 0 891 53140- 60 V DC max. 50 mW ± 10 % 0 891 53280-125 V DC 750 mW ± 10 % 0 891 533
Dimensions in mm
Cover can bescrew-mounted
219Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Plug-in Time Counters for Modular System 400
6 or 7-digit display With or without reset Simple installation Easy maintenance through plug-in system Can be combined with other counters in the modular system 400
Type 478
Display 6 or 7-digit, depending on versionCounting range 0 ... 9999.99 h or 0 ... 99999.99 h, depending on versionDigit height 4 mmSupply voltage Vop acc. to order information, tolerance + 10 %Power consumption approx. 1 VAOperating temperature - 10 ... + 50 °CStorage temperature - 20 ... + 70 °CProtection class (EN 60529) front IP 40, connections IP 00Vibrostability 50 m/s2 acc. to IEC 068-2-6Shock stability 600 m/s2 (6 ms) acc. to IEC 068-2-27General design according EN 61010-1Contamination Level 2Protection according to class IIOvervoltage category IIReset depending on version
- manual reset with key or button- without reset
CONNECTION DIAGRAM
TECHNICAL DATA
M
Components 2001220 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Voltage 6-digit with reset 7-digit without reset50 Hz 60 Hz DC 50 Hz 60 Hz DC
12 V – – 0 478 160 – –24 V 0 478 101 0 478 121 0 478 111 0 478 112 0 478 123
115 V AC 0 478 103 0 478 104 – 0 4 78 113 0 478 114 –220 VAC 0 478 105 0 478 106 – 0 478 115 0 478 116 –Inquire for other version
Connection box Ordering code 1 405 464Panel frame, black Ordering code 1 405 491Key reset system Ordering code + SR e. g. 0 478 160 SRCase, covers see ”Accessories“
ORDER INFORMATION Counter
Standard accessories
DIMENSIONS
Dimensions in mm
Type 478
221Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Time Counters mini "h",DC Version
High shock resistance Miniature dimensions Low power consumption Electrical connections in standard grid Suitable for PCB mounting Machine-solderable and washable versions available Protection class IP 65
Typ 0633.0
Disable-Eingang
+ 1 3 5 2 -
+ VDC 0V
Typ 0633.7/0633.8
Disable-Eingang
+ 1 2 6 7 -
+ VDC 0V
TECHNICAL DATA
CONNECTION DIAGRAM
Type 633.8Type 633.7Type 633.0
Display 7-digit, 0 ... 99 999.99 hDigit height 4 mm, visualSupply voltage Vop acc. to order information, tolerance + 10 %Power consumption approx. 30 mWResidual ripple < 1 %Operating temperature - 10 ... + 60 °CStorage temperature - 40 ... + 70 °CEl. connection versions .0 solder pins, .7 and .8 wiring posts 0.6 mmMounting versions .0 on PCB, .7 with wiring posts, .8 with catch springMounting position horizontal figure wheel shaftProtection class (DIN 4050) IP 66, versions .7 and .8 only at front, connections IP 00Vibrostability 30 m/s2 (10 - 500 Hz) acc. to IEC 068-2-6Shock stability > 3500 m/s2 acc. to IEC 068-2-27General design acc. to DIN VDE 0700; insulation group C (VDE 0110),
protection class IIWeight approx. 10 gTime error with disable per switching cycle 0.488 msReset none
Activation: The counter is connected to 0 V and + VDC. The counter is switched off by connecting Pin 2 with Pin 7 or Pin 3.
Type 633-DC
Type 0633.0
Disable inputDisable input
Type 0633.7/0633.8
Components 2001222 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Current consumption Type 633.0 Type 633.7 Type 633.8 Voltage Ohm during pulse Ord. code Ord. code Ord. code
5 VDC 140 35 mA 0 633 031 0 633 731 0 633 831 12 VDC 720 17 mA 0 633 032 0 633 732 0 633 832 24 VDC 1140 9 mA 0 633 033 0 633 733 0 633 833
Flying lead 150 mm red 1 634 008 1 634 008 Flying lead 150 mm black 1 634 007 1 634 007
DIMENSIONS
Type 633.0
Type 633.7
Typ 633.8
Technical data
ORDER INFORMATIONCounter
Accessories
Dimensions in mm
Dimensions in mm
Dimensions in mm
Type 633-DC
223Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Miniature Time Counterfor 35 mm DIN Rail Attachment
Miniature size Low power consumption Screw terminal connection Suitable for switch cabinet installation Snap-on attachment for 35 mm DIN rail
TECHNICAL DATA
CONNECTION DIAGRAM DIMENSIONS
Dimensions in mm
ORDER INFORMATION Time counter for supply voltage 5 VDC 0 633 531 Time counter for supply voltage 12 VDC 0 633 532 Time counter for supply voltage 24 VDC 0 633 533
connectionwithoutdisable1 = + VDC2 = 0V
with disable1 = + VDC4 = 0V2 = disable
Display 7-digit, 0 ... 99999.99 hDigit height 4 mm, visualSupply voltage Vop acc. to order information, tolerance + 10 %Current consumption during pulse voltage
35 mA 5 VDC17 mA 12 VDC9 mA 24 VDC
Residual ripple < 1 %Operating temperature 0 ... + 60 °CStorage temperature - 40 ... + 70 °CProtection class (DIN 4050) IP 10Vibrostability 30 m/s2 (10 - 500 Hz) acc. to IEC 068-2-6Shock stability > 3500 m/s2 acc. to IEC 068-2-27General design acc. to DIN VDE 0700; insulation group C (VDE 0110),
protection class IIWeight approx. 40 gTime error with disable 0.488 ms per switching cycleReset none
Type 633-DC
Components 2001224 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 633-AC
Miniature dimensions Low power consumption Quiet operation Protection class IP 65
TECHNICAL DATA
Time Counter mini "h",AC Version
VAC
M
Display 6-digit, 0 ... 99999.9 hDigit height 4 mm, visualSupply voltage Vop acc. to order information, tolerance + 10 %Power consumption 24 V 0.08 VA, 115 V 0.56 VA, 220 V 1 VAOperating temperature - 10 ... + 50 °CStorage temperature - 25 ... + 70 °CHumidity 75 %, without condensationEl. connection depending on version
screw terminal connection for cables up to 2.5 mm2
or 250 mm long connecting cable, AWG 28or AMP 2.8 x 0.8 mm
Mounting with clamping frameMounting position horizontal figure wheel shaftProtection class (DIN 4050) Version .8: front IP 66, connections IP 40 (touchproof)Vibrostability 30 m/s2 (10 - 500 Hz) acc. to IEC 068-2-6Shock stability 800 m/s2 (6 ms) acc. to IEC 068-2-27General design acc. to DIN VDE 0700; insulation group C (VDE 0110),
protection class IINoise level approx. 40 dB (distance 25 cm)Reset none
CONNECTION DIAGRAM
225Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
DIMENSIONSScrew terminals
ORDER INFORMATION
Counter
Accessories
Voltage Screw Connecting terminals cable
24 V 50 Hz 0 633 811 0 633 821 115 V 50 Hz 0 633 813 0 633 823 115 V 60 Hz 0 633 814 0 633 824 220 V 50 Hz 0 633 815 0 633 825
Other voltages on request
panel frame 24x36 mm (insert dimensions 22 x 36 mm) Ordering code 1 405 674
Connecting cable
AMP connector
Dimensions in mm
Dimensions in mm
Dimensions in mm
Type 633-AC
Components 2001226 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Bi-directional Multifunctional-Counter
high-contrast LED or LCD-Display, 6 digits small and compact DIN dimensions 48 x 48 mm easy operation by one key per digit direct access to parameters available with 1 or 2 presets transistor and relay with changeover contact, for each preset with integrated separate totalizer 5 basic functions easily programmable: counter, tachometer, time counter, shift
counter and batch counter display range from – 99999 to 999999
F1 F2 PSC PRG F1 F2 PSC PRG
F1 PRG PRGF2 PRGPSC
Reset
R 46
E
E
E
5 E 6
E
E
E
32E
E
1E
count mode
programming mode
and POWER ON and POWER ON
> 5 sec
preset 1 preset 2 prescaler function-parameter e.g. Basic-function*
count modedecimalpointreset/set-modesignal lengthpnp/npn-selectionreset modeoutput memorytime counter-tachometerkeylock for:manual resetpreset 1 or 2prescaler
* only formultifunction version
countertachometertime countershift counterbatch counter
PROGRAMMING
The important values, preset 1, preset 2, prescaler and separate totalizer can be direc-tly selected. It is necessary only to press the relevant button and the E-buttontogether. To make the operation still more easy, access to those values can be lockedseparately. All other system parameters like operation and count modes are laid downin a common operation level. These parameters are usually programmed once onlyduring the first initiation.
tico 732
227Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TECHNICAL DATA
General
Counter
Tacho
Time-counter
Display LED or LCD, 6 digits, leading zero suppression, decimal pointDigit height LED 7.6 mm; LCD 9 mmSupply voltage 12...24 VDC; 24 VAC; 115 VAC; 230 VAC; 50/60 Hz,
depending on versionCurrent consumption 12...24 VDC < 150 mA
100/115/230 VAC < 50 mA; including sensor supplySensor supply only when AC operated: 12 ... 30 VDC, max 50 mAData retention non-volatile memory > 10 yearsOperating temperature 0 ... +50 °CStorage temperature - 20 ... + 70 °CElectrical connection screw terminalsMounting with clamping frameProtection class (IEC 144) front side IP 65, terminals IP 20Vibrostability 10 m/s2 (10...150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to VDE 0411, DIN 57411, protection class IIApprovals UL + CUL E 96337Amplitude thresholds < 2 V and > 8 V, max 40 VDCActive edge programmable; positive with pnp input; negative with npn inputPulse shape any (squarewave 1:1 for max. frequency)Input resistance approx. 10 kOhm (static)Counting frequency max. 5 kHz (2.5 kHz bi-directional)Prescaler programmable from 0.001 to 9.999 (999.999)Count inputs A, B - phase discriminator with single evaluation
- differential mode (add/sub)- count direction mode- totalizing mode (add/add)
Pulse length min. 17 ms (30 Hz), 100 µs (5 kHz)Control input C - manual reset possible
- external reset, static or dynamic, programmable,pulse length > 5 ms
- automatic reset when main preset has been reached (programmable)
Relay changeover contact max. 250 VAC / 30 VDC, min. 5 V AC/DCmax. 1 A, min. 10 mA, delay < 5 ms
Transistor pnp output 12...24 VDC max 10 mA of DC supply; 12…30 V DCmax. 10 mA of AC supply
Method time interval (1/Tau)Display range 1/min or 1/secMin input frequency 0.125 Hz = 8 secAlarms 2 alarms with programmable start-up-suppressionTime bases programmable; sec, min., h or hh.mm.ssResolution programmable 1; 0.1; 0.01; 0.001 (on sec = 1 ms)Function single pulse measurement (short time meter) or cummulated
counting (hour meter)Count mode pulse width or period measurement (start-stop)
DIMENSIONS
tico 732
Dimensions in mm
clamping frameplug terminal
tico 732
Components 2001228 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 007Technical data
Display Preset 12–24 VDC 24 VAC 115 VAC 230 VAC
LCD – 0 732 000 0 732 071 0 732 037 0 732 001LCD 1 0 732 002 0 732 073 0 732 039 0 732 003LCD 2 0 732 012 0 732 078 0 732 049 0 732 013LED – 0 732 018 0 732 080 0 732 055 0 732 019LED 1 0 732 020 0 732 082 0 732 057 0 732 021LED 2 0 732 030 0 732 087 0 732 067 0 732 031
Important: only versions with 2 presets or without preset can be used as tachometers.
ORDER INFORMATION
Display
LCD
LED
Function
Tacho
Shift counter*
Batch counter*
no output
1 output(1 relay,1 transistor
2 outputs(2 relays,2 transistors)
12 - 24 VDC
230 VAC
Outputs Power supply
Counter +totalizer
100 VAC
115 VACTimecounter +totalizer
CONNECTING DIAGRAM
POSSIBLE VARIANTS
Multifunctional version: Article No.: 0 732 0 B
For versions with no output, pins 7–9 and 15-17 are not connected.
VDC 1 Rel/1 Trans
VDC 2 Rel/2 Trans
VAC 1 Rel/1 Trans
VAC 2 Rel/2 Trans
229Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
LCD display, 8 digits, 12 mm height, excellent contrast through Backlighting with a 10-28 VDC supply Lithium battery power supply Decimal point, input scaling, count direction, output mode, etc. programmable,
depending on model Programming reduced to a minimum for easy handling and set-up CE approval, IP 65, NEMA 4 Suitable for TTL Mounting depth 29 mm
MODEL OVERVIEW
Flexible Counter Seriesin DIN size 36 x 72 mm
The family tico 734 consists of ten models:
0 734 000 Totalizer without scaling0 734 001 Add/Subtract totalizer0 734 002 Position indicator0 734 003 Tachometer0 734 004 Programmable rate meter0 734 005 Rate meter with totalizer0 734 006 Time counter0 734 007 Preset counter0 734 008 Time preset counter0 734 009 Rate meter 005; with total and pulsed output
Verwendbare Optionsmodule: 1 734 010 … 0204 Remote reset, NPN3 Timing Enable, NPN
or dry contact2 Not used1 0V, Common5 Program enable6 Not used7 Not used8 DC-supply for backlightingSuitable option modules: 1 734 0.. 10, 12, 14, 17, 19
Elapsed Time Indicator (0 734 006)6 digit, display format: 999999s,99999.9m, 99999.9h, hh:mm:ss, reset key can be enabled/disabled
4 Remote reset, NPN3 Timing Enable, NPN or dry contact2 Not used1 OV, Common5 Program enable6-7 Output SSR (Form A)8 DC-supply for backlighting
Preset Timer (0 734 008)6 digit, display format: 999999s,99999.9m, 99999.9h, hh:mm:ss, programmable for up or down counting, SSR output programmablefor on-delay or interval, reset key can be enabled/disabled, preset lock function Suitable option modules: 1 734 010 … 20
tico 734
Components 2001230 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical datatico 734
Internal Single or dual lithium 3 V battery (CR 1/2 AA), typical lifetime of 5 years (10 yrs w/2 batteries). „Lo BAT“ display flashes approximately 2 weeks prior to end of battery life.
via Option Module 120/240 VAC provides 12 VDC for display backlighting Display LCD, 12 mm height, 8 digits Backlighting Whole display area can be backlit with a 10-28 VDC supply,
green-yellow colourHigh Speed Input (2) PNP, ≤ 28 VDC, max. 10 kHz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impulse > 45 µs, impedance 1 MΩLow Speed Input (3) NPN, ≤ 28 VDC, max. 30 Hz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impedance 1 MΩHigh Voltage Option 100..260 VAC/DC, 30 Hz, 1 MΩ, with internal Module connection to input (3)Low Voltage Option 5..30 VAC/DC, 30 Hz, 17 kOhm, with internal connection Module to input (3)Enable Input (5) NPN, 28 VDC, level sensitiveReset Input (4) NPN, 28 VDC, edge triggered, max. 30 Hz (50 % duty cycle)SSR Relay Photomos relay, 0.1 A, 30 VAC/DC, reaction time < 5 msRelay Option Module Changeover contact 5 A, 120/240 VAC or 30 VDCMounting Front panel mounting with mounting bracketDimensions DIN 36 x 72 mm, 36 mm total depth, total width 83 mmPanel Cutout 33+0,3 mm x 68+0,3 mm, depth behind panel < 29 mmPanel Thickness max. 8 mmFront Panel Rating IP 65 / NEMA 4Operating and Storage 0 °C to + 55 °CTemperature - 20 °C to + 60 °CGeneral DIN EN 61010 part 1 / VDE 0411 part 1
Protection according to class II, Contamination level 2 Overvoltage category II
Control Inputs
Output (only 008)
Physical
Environmental
Count Inputs
Display
Power Supply
DIMENSIONS
A: gasket, B: mounting bracketincl. option modul
Dimensions in mm
1) Panel cutout: 33 x 68 mm2) Panel thickness: max 8 mm
231Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
FUNCTIONS OVERVIEW
Power 115 VAC or 230 VAC (see wiring), frequency 50/60 Hz. Terminal (8) provides Supply (E-H) an unregulated 10-20 VDC supply for powering sensors up to 50 mARelay Type: SPDT (Form C) mechanical relay; Operate Time: 6 msOutput 5A, 120/240 VAC or 30 VDC, silver alloy(A-B-J) Electrical Life: > 500 000 operations, Mechanical Life: > 10 million operationsHigh Voltage Range: 100 to 260 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 200 kOhmLow Voltage Range: 5 to 30 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 17 kOhmMounting Attaching on back of instrumentDimensions 42 x 69 mm, depth 58 mm, total depth behind panel with instrument 82 mmTemperature Operating: -0° C to +50° C; Storage -20° C to +60° C;General DIN EN 61010 part 1, Protection according to class II
Contamination level 2; Overvoltage category II
OPTION MODULES
With the Option Modules, the tico 734 can be functionally extended and adaptedto special application conditions. The following option functions are available: AC power supply providing sensor supply 10-20 VDC / 50 mA and 12 V supply
for display backlighting (supports the battery in models with SSR output) Relay output, changeover contact, 5 A, 120/240 VAC or 30 VDC High voltage input (100..260 VAC/DC, max. 30 Hz, 200 KΩ)
Connections 010 011 012 013 014 015 016 017 018 019 020
High Voltage Input C-D x x x xRelay 1 x change over A-B-J x x x x x x AC power Supply E-F, G-H x x x x x xLow Voltage Input C-D x x x x
1734 …
TECHNICAL DATA
WIRING
ORDERING INFORMATION Panel Instruments
Totalizer 0 734 000Add/Subtract Totalizer 0 734 001Position Indicator 0 734 002Tachometer 0 734 003Programmable Rate Meter 0 734 004Rate Meter with Totalizer 0 734 005Elapsed Time Indicator 0 734 006Preset Counter 0 734 007Preset Timer 0 734 008Rate Meter with Total 0 734 009and Pulsed OutputLithiumbattery E3533 355
Option Modules
HV Input 1 734 010Relay 1 734 011AC Power 1 734 012HV Input and Relay 1 734 013HV Input and Power 1 734 014Power and Relay 1 734 015HV Input/Power/Relay 1 734 016LV Input 1 734 017LV Input and Relay 1 734 018LV Input and Power 1 734 019LV Input/Power/Relay 1 734 020
tico 734
All modules contain 17 terminals. Theexact functions that are present aredetermined by the model of instrumentand option module (see Functions Over-view).1-8 Connection to instrument
(refer to appropriate operatinginstructions)
A Normally Open Relay ContactB Relay CommonJ Normally Closed Relay
ContactC-D High or Low Voltage Input, no
polarity, (provides NPN signal on terminal 3)
E-F 115 VAC Line winding IG-H 115 VAC Line winding II
Components 2001232 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 735 Flexible Counter Series, Dual Colour Display,in DIN size 48 x 96 mm
COUNTING - MEASURING - INDICATING - MONITORING - TRANSMITTING
Because of the unlimited number of measurements it can handle, the tico 735 devicefamily is equally well suited to applications in the world of impulse and time coun-ting as to those in the processing area.If you are looking for display clarity and high levels of accuracy, then the tico 735is the right choice for you. The dual-colour display is unique, highlighting an alarmsituation or an excess value at a single glance. You can programs your own choiceof display colour to indicate normal or alarm conditions.
FEATURES Brilliant 18.5 mm high dual-colour red/green LED display with programmablecolour settings
As standard, all models have limit or preset values Scaling available as standard Universal Power Supply 90...264 V AC or 20...50 V AC/DC Simple structured operation with switchable help function
External Program Lockout DIN housing 48 x 96 mm, mounting depth < 100 mm Conveniently sized Screw Terminals Large keys offer safety and ease of operation
NPN and Relay Outputs Option: RS 485 ASCII protocol serial interface for all versions. ”Remote Display”
version receives process values over RS 485
TIME PRESET COUNTER Time formats programmable 9999.9 s, 9999.9 m, 9999.9 h,(minimum time 0.1 Sec) mmm:ss, hhh:mmTime Preset with Output Signal 0...99999Count Direction up/down 0 -> P 1, P 1 -> 0Count Mode Single, Accumulating
233Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 735
DIMENSIONED DRAWINGS
DISPLAY AND KEYBOARD
PHYSICAL
OPERATING CONDITIONS
APPROVALS
OPTION RS 485
Primary Display Red/Green, 7 segment LED, 5 digits, height 18.5 mmSecondary Display single digit 7 segment LED, height 7 mm, red/greenOutput Indicators 2 red LED indicators for OUT 1 and OUT 2 statusKeyboard 4 rubber keys for programming and manual reset
Front Dimensions DIN 48 mm x 96 mm, 110 mm total depthMounting Front panel mounting (mounting bracket supplied)Panel Cutout 45 mm x 92 mm, panel thickness max 12 mmConstruction Front carrier with PCBs can be pulled outTerminals Screw Type (combination head)
Power Supply 90 - 264 V AC 50/60 Hz (electrically separated from all inputs and outputs) or 20...50 V AC / 22...55 V DC
Temperature Operation: 0 °C to +55 °C (32 °F to 131 °F)Storage: -20 °C to +60 °C (-4 °F to 176 °F)
Relative Humidity 0 to 90 %, non-condensing
Protection class Frontpanel IP 66CE EN 50082-1/92-95; EN 50081-1/92, -2/94Safety DIN EN 61010 part 1; protection according to class IIGeneral UL, CUL, Overvoltage cat. II, Contamination level 2
Type RS 485, serial asynchronous, Open ASCII, Master-Slave, up to 99 zones
Parameters 9600...1200 Bd, 1 start, 7 data, 1 stop, even parity
10096
48
tico 735
PGM RST
Dimensions in mm
Components 2001234 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technische Datentico 735
ORDERING DATA
129 8 7 6 5 4 3
10
11
12
13 14 15 16 17 18 19 20 21
22
23
24
RS 485B A + 0V Relay OUT1
LinearOutput
+
-
0V
OU
T1N
PN
CTRL
1
CTRL
2
Aux.
Pow
er
0V
Inpu
t A
Inpu
t B
OU
T2N
PN
NC
RelayOUT2
NC
~ ~90-264 VAC
22-50 VDC/ACor
TERMINALS
SPECIAL FEATURES
CONTROL INPUTS
COUNT INPUTS Active Edge NPN or PNP programmable; capable of TTL; 30 V DC maxwith PNP High ≥ 3.0 V, Low < 2.0 V or open; 10 kOhm to 0 Vwith NPN High ≥ 3.0 V or open, Low < 2.0 V; 4.7 kOhm to V+Frequency 20 Hz, 200 Hz or 10 kHz programmable
CTRL1 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+ (Reset or hold) edge sensitive; 25 ms min., max 30 V DCCTRL 2 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+(Progr. security)) level sensitive; 25 ms min.; max 30 V DC
OUT 1 NPN NPN, open collector; 30 V DC max; 100 mA maxresponse time < 75 µs
Relay 1, Changeover (Form C); 240 V AC / 3A or 110 V AC / 5 A; pull-in time 8 ms
Auxiliary 9...15 (unregulated V DC), 125 mA max; residual ripple < 0.5 VPower Supply
Display colour programmable Preset Lockout and Reset Disable programmable Program Security via CTRL 2 Scaling available as standard
0 7 3 5 P
Type 0735 P
Function1 Totaliser2 Position Indicator4 Tacho/Rate Meter5 Rate + Totaliser6 Time Counter7 1 Preset Counter8 2 Preset Counter9 Batch Counter
Power Supply0 90…264 V AC2 20…50 V AC or
22…55 V DC
Output Relay 20 none1 with Relay 2
not for function1, 6, 7
Interface0 none5 with RS 485
Linear Output0 none3 with 4-20 mA
(only with function 2, 4, 5)
Option module Ordering codeRS 485 interface 1 901 004
OUTPUTS
235Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Preset value continuously visible Manual reset Resolution 0.1 h Plugs into modular system 400
Plug-in ElectromechanicalPreset Time Counters
Display 5-digit indication of count and preset value, 9999.9 hDigit height 4 mmSupply voltage Vop see ordering code table, tolerance + 10 %Power consumption counter: 1 VA/WOperating temperature - 10 ... + 50 °CStorage temperature - 20 ... + 85 °CElectrical connection AMP connector, 0.8 x 2.8 mm (via connection box)Mounting modular system 400Mounting position roller axis horizontalProtection class (IEC 144) front IP 40, connections IP 00; for higher degree of protection
we recommend a protective case with transparent cover(see "Accessories")
General design acc. to DIN VDE 0700Reset manual with buttonReset frequency DC version max. 1 per s, AC version max. 1 per 2 s
Signal output changeover contact, floatingSignal duration from when preset has been reached until resetSwitching voltage max. 220 VACSwitching current max. 20 VA/1 A, non-inductive
TECHNICAL DATA
Type 489
Components 2001236 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 489
DIMENSIONED DRAWINGS
Technical data
CONNECTION DIAGRAM
Voltage Display 9999.9 hOrdering code
24 V/50 Hz 0 489 101 115 V/50 Hz 0 489 103 220 V/50 Hz 0 489 105 24 V/60 Hz 0 489 102*
220 V/60 Hz 0 489 106* 24 VDC 0 489 121
Key reset system Ordering code + SR e. g. 0 489 101 SRPanel frame 1 405 492Connection box 1 405 537
* on request
ORDER INFORMATIONCounter
Standard accessories
Front view Lateral view Installation cutout
with connection box
with connection box and panel frame
Dimensions in mm
M
tico 007
237Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electromechanical Preset Time Counters
Preset value continuously visible Button reset Resolution 0.01 h
TECHNICAL DATA
DIMENSIONED DRAWING
Dimensions in mm
Display 5-digit indication of count and preset value, 999.99 h Digit height 4 mmSupply voltage Vop acc. to order information, tolerance + 10 %Power consumption counter: 1 VA/WOperating temperature - 10 ... + 50 °CStorage temperature - 20 ... + 85 °CElectrical connection AMP connector, 0.8 x 2.8 mmMounting clamping springMounting position roller axis horizontalProtection class (IEC 144) front IP 40, connections IP 00General design EN 61010-1, protection according to class II
Contamination level 2, Overvoltage category IiReset manual with buttonReset frequency DC version max. 1 per s, AC version max. 1 per 2 s
Signal outputSignal duration from when preset has been reached until resetContact type floating changeover contactSwitching voltage max. 220 VAC
Type 888
Components 2001238 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 888
DisplayVoltage Ordering code
230 V AC/50 Hz 0 888 405 24 V DC 0 888 421
Key reset system Ordering code + SR e. g. 0 888 405 SR
CONNECTION DIAGRAM
Technical data
ORDER INFORMATIONCounter
Standard accessory
M
239Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Analogue Multi-Function TimerDigital Multi-Function Timer
Large dial for easy adjustment of set time Field configuration by DIP switches and time range selector DIN rail or panel mountable Visual Timing status, provided by LED indicator Inputs for Start and Reset Universal Power Supply 24-240 VAC 50/60 Hz and 24 VDC on same inputs Standard socket connector 11 pin Protection IP 65 CE approved, IP 65, UL/CSA
Easy programming on the front panel DIN rail or panel mountable High contrast LCD display indicates both process time and preset value Resolution down to 0.01 s Inputs for Start and Reset Universal Power Supply 24-240 VAC 50/60 Hz and 24 VDC on same inputs Version with instantaneous contact available Protection IP 65 CE approved, IP 65, UL/CSA
DIGITAL
tico 740
ANALOGUE
FRONT PANEL OPERATIONTICO 741TICO 742 MULTIFUNCTION
4 23 1
PE
INOUTRST
Timing
HM
HMS
TimeRangeIndicators
I/O StatusIndicators
TimingIndicators
TimeValue
SetValue
NumericKeys
Edit Key Program Key
tico 741
The Edit Key is used to to scroll through the choices in Program mode. In Operation mode it can bepressed simultaneously with the Program Key to reset the timer.Pressing the Program Key for 3 seconds moves the unit in and out of Program mode and scrolls fromone parameter to the next.I/O Status Indicators: „IN“ reflects an active start input, „RST“ the reset input and „OUT“ the timed output.„Timing“ flashes when a timing function is taking place. The applicable arrow also indicates thetiming direction.Time preset is effected with keys 4-1.
tico 741
tico 740 tico 741
Components 2001240 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 740tico 741
Technical data
TICO 740, TICO 741OPERATING MODES
(A) On-delay
Power
Start
Output T T
Power
Start
Output T T
Power
Start
Output
Reset
T T T
Power
Start
Output
Reset
T TT2
The reset input is not used in this mode.
On the leading edge of the start signal, the outputis activated and timing begins. The output willremain active until the preset time (T) has elapsedor power is interrupted. Removal of the start sig-nal will also cause the output to be deactivatedand the time value reset.The reset input is not used in this mode.
The output is activated at the leading edge of thestart signal. Timing begins on the trailing edge.The output will remain active until the presettime (T) has elapsed or power is interrupted. Re-applying the start signal before T has elapsedwill reset the time value.
On the leading edge of the start signal, the outputis activated and timing begins. The unit will timeout regardles of the start signa’s state.l Applica-tion of a reset signal or interruption of power willreset the timer.
Timing begins upon application of power. A cycleis initiated where the output will be OFF for thepreset time (T), then ON for the preset time. Thiscycle will continue until a reset signal is appliedor power is interrupted. If the start signal is pre-sent upon power-up, the cycle will be invertedwith the ON phase proceeding the OFF phase.
Timing begins on the leading edge of the startsignal. The output turns ON when the delay pre-set time (T) has elapsed. The output remains ONfor the duration of the interval time (T2), thenturns OFF. Interval times (T2) of 0.5 to 10 s maybe selected via DIP switches (tico 740) or 0.1 to999.9 s programmable for the tico 741.
Power
Start
Output
Reset
T
The following gives an overview of all possible operating modes.
Timing begins on the leading edge of the startsignal. The output will be activated at the com-pletion of the preset time (T) and will remainactive until the reset signal is applied or poweris interrupted.
(C) Interval
(B) Off-delay
(C2) Interval 2 (= One-shot)
(D) Repeat cycleOn or OFF starting
(E) On-delay/interval
Power
Start
Output
Reset
T T T T
Timing begins upon application of the start sig-nal. A cycle is initiated where the output will beON* for the preset time (T), then OFF for the pre-set time. This cycle will continue while the startsignal is active or until a reset signal is appliedor power is interrupted. * ON or OFF starting can be programmed.
(F) Repeat Cyclewith start signal
Tis mode is only applicable for tico 740.
Tis mode is only applicable for tico 741.
241Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Power Supply Universal power supply 24-240 VAC 50/60 Hz and 24 VDC, power consumption < 10 VA
Start Dry contact or NPN; Contact requirements < 1 kOhm; Reset NPN requirements: VCEO = 20 V (min), VCE(S) = 1 V (max),
IC = 50 mA (min), ICBO = 0.5 µA (max)Timed Contact Changeover contact 5 A, 120/240 VAC or 30 VDC;
response time approx. 15 ms,Instantan. Contact 100,000 cycles at max. load, life 10 million cycles at minimum loadMounting Front panel mounting with mounting bracket (accessory)
or DIN rail mounting with socketPanel Mounting Cutout 45+0,3 x 45+0,3 mmRating Front Panel IP 65Temperature Operation: 0 °C to + 55 °C; Storage: – 40 °C to + 90 °CGeneral DIN EN 61010 part 1, Protection according to class II
Contamination level 2, Overvoltage category II
The insulation between the wiring pins is applied for a base insulation up t0 300 V
Dial Dial with scale from 0 to 10, left or right limit stop or total locking of the dial can be achieved with the locking ring (accessory)
Time Ranges 6 time ranges: 1 s, 10 s, 1 min, 10 min, 1 hour, 10 hours, settable with a screwdriver on bottom of housing
Accuracy Setting accuracy ± 5 %Repeat accuracy ± 0.5 %
Panel Thickness max. 6 mm
Display LCD display, 2 lines, 4 digits each line, indicators for timing, input signals, output status, timing direction, time ranges
Time Ranges 5 time ranges: Hours, Minutes, Seconds, hh:mm, mm:ss; up to 9999 hours
Resolution Settable for XXXX to XX.XX for Hours, Minutes and Seconds, resolution down to 0.01 seconds
Accuracy Repeat accuracy ± 0.03 %Panel Thickness max. 10 mm
48 mm 9mm
62 mm76 mm
S
Flipdoor
Time RangeIndicator
Time RangeSelector
(bottom view)
DialSetting
tico 740
TECHNICAL DATAGeneral
Mechanical
Environmental
Outputs
Mechanical
Inputs
ANALOG TIMER TICO 740
DIGITAL TIMERTICO 741
DIMENSIONSANALOG TIMERTICO 740
Cutout: 45 x 45 mm S: 11 pole standard socket for DIN rail (accessory)
Mechanical
tico 740tico 741
Dimensions in mm
81 mm
66 mm
48 mm8 mm
4 23 1
PE
tico 741
Components 2001242 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 740tico 741
12
3
4
5 6 7
8
9
1011
Start
Out1 Out2
Reset
Power(+)(–)
Ordering code Description Operating Modes *
0 740 000 Multi-Function Timer (A), (B), (C), (D)0 740 002 Timer On-Delay/Interval (E)0 741 001 Multi-Function Timer LCD (A), (B), (C), (E), (F)0 741 011 MF Timer LCD with instantaneous contacts (A), (B), (C), (E), (F)1 740 100 Accessory for tico 740: locking ring + mounting bracket1 740 111 Accessory: 11 pin socket for DIN rail
* see Operating Modes
The tension panel of tico 740 has to be ordered separatly.
CONNECTION DIAGRAMTICO 740, TICO 741
Technical data
ORDERING INFORMATION
All specifications are descriptive and do not constitute a binding assurance of features. Sub-ject to alteration.
DIGITAL TIMERTICO 741
0 740 0000 740 0020 741 001Out 1, Out 2: Timed contacts (DPDT)
0 741 011Out 1: Instantaneous contact (SPDT)Out 2: Timed contact (SPDT)
Cutout: 45 x 45 mmS: 11 pole standard socket for DIN rail (accessory) Dimensions in mm
tension panel included
243Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Multi Function Timer LED
FEATURES
17 different, field programmable, modes of operation Batch count function with timed or latched output Dual setpoints in many modes Timing resolution down to 1 ms Programmable security levels prevent unauthorized setpoint or program changes High Visibility, 2 lines LED display of both time value and setpoint Available with relay or solid state outputs IEC IP 65 rated front panel Repeatability of 0.01% Inhibit input halts timing without resetting the cycle Power supply 90–264 VAC or 24 VAC/DC
FEATURES
Repeat Cycle functionality with completely independent settings for On and Off times
Batch Count function can trigger an output and stop the cycle Batch Count function with timed or latched output Settings can be input as absolute time values or as a time base and percentage Simple button per digit interface Timing resolution down to 1 ms Programmable security levels prevent unauthorized setpoint or
program changes Highly visible 8 mm dual line LED display with 8 annunciator lights. Available with relay or solid state outputs IEC IP 65 rated front panel Repeatability of 0.01% Inhibit input halts timing without resetting the cycle Power supply 90–264 VAC or 24 VAC/DC
HIGH PERFORMANCE
REPEAT CYCLE
DIMENSIONS DRAWING
MULTIFUNCTION FEATURES
Same functions as tico 741 Power supply 90–264 VAC or 24 VAC/DC LED-display and LED indicators Operating and technical data see tico 741
81 mm
66 mm
tico 742
4 23 1
PE
8 mm48 mm
48 mm
45.0+ 0.3 mm
Panel Cutout
tico 742
Components 2001244 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 742
Power supply 0742 01/51: 100-240 VAC 50/60 Hz; +10 % -15 %; < 10 VA; typ. 4 VA0742 02/52: 24 V AC/DC; +10 %,-15 %; < 200 mA; typ. 100 mA
Display LED display, 2 lines, 4 digits each line, indicators for input signals,output statur and time ranges
Time Ranges 5 time ranges can be programmed: Hours, Minutes and Seconds,hh:mm, mm:ss; up to 9999 hours
Resolution Settable for XXXX to XXX.X for Hours, Minutes and Seconds, resolution down to 0.001 seconds
Start input / Reset Dry contact or NPN; Contact requirements < 1k Ohm; input / Inhibit input NPN requirements: VDE0 = 20 V (min), ICB0 = 0.5 µA (max)Signal times Start activation: > 20 ms; drop out > 80 ms
Reset activation: > 20 ms; drop out > 80 msPower interruption > 800 ms
Relay 2x Changeover contact 5 A, 120/240 VAC or 30 VDC; Reaction time approx. 15 ms
Transistor Outputs NPN Open Collector; 30 VDC; 30 mA max.: opto isolated
Life electrical 100,000 cycles, mechanical 10 million cyclesMounting Front panel mounting with mounting bracket or DIN rail mounting
with socket, panel thicknes max. 10 mmSchutzart Front Panel IP 65Temperatur Operation: 0 °C to 55 °C
Storage: -40 °C to + 90 °CGeneral DIN EN 61010 part 1; Protection according to class II;
Contamination level 2; Overvoltage category II11 pin socket 1 740 111
CONNECTIONS
TECHNICAL DATA
Technische Daten
OUT 1: Output preset P1 OUT 2: Output preset P2 or batch preset
9
Inhibit
Out1 Out 2
Power
8
76
5
4
3
21 11
10
(-) (+)
ResetStart
Inhibit
Power
StartReset
3
4
56
7
8
9
1011
21
Out 1 Out 2
(-) (+)
AC Power
AC Power
1
2
3
4
56
7
8
9
1011
OPERATING
I/O Status IndicatorsIlluminates to display when an input or output is active:“IN’ for the start input, “O1” and “O2” for the timed out-puts.
Preset 2 IndicatorIlluminates to indicate that Preset 2 is being shown on thelower display.
Numeric KeysEach of the number keys is used to increment the value ofthe corresponding digit of the preset or parameter value
Edit KeyIn Control Mode: With “P” key, resets the display value.In Program Mode: Scrolls between the applicable choices for the currently displayed parameter.
Primary DisplayIn Control Mode: Displays the current time value associated with the dis-played preset or the batch value (if configured).In Program Mode: Display the Parameter Description.
Time Range IndicatorIlluminates to show the time base: H for hours, M forminutes, S for seconds. Multiple indicators will be illuminated when the time base is Hours: Minutes orMinutes:Seconds. During timing operation the illumina-ted LED will flash.
Batch IndicatorIlluminates to indicate that the Batch Count Value andBatch Preset are being displayed.
Set ValueIn Control Mode: Displays the settable value used totrigger the timed output(s) and the batch count (if con-figured).In Program Mode: Displays the curent selection for the
Program KeyIn Control Mode: Depressing the key will scroll the display among the preset andbatch displays. Holding the key down for 3 seconds will shift the unit into ProgramMode. With the “E” key, resets the displayed valueIn Program Mode: Depressing the key will scroll the display from one parameter tothe next. Holding the key down for 3 seconds will shift the unit to Control Mode.
245Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Timing Diagrams High Performance 0 742 2xx
ON DELAY - ABSOLUTE
An Inhibit input will halt timing functions, bit leave the outputs in their current state. If the start inputis applied during Reset, a new timing cycle will begin on the trailing edge of the reset signal.
Start
OUT 1
OUT 2
P1
Reset
P2
ON DELAY - PREWARN Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetPreset 2 Prior to completion of P1 by On completion of P2Timing the amount of time set in P2 or ResetOutput 1 Upon completion of P1 On ResetOutput 2 Prior to completion of P1 by On Reset
the amount of time set in P2
P1 must be set to a value greater than P2. An Inhibit input will halt all timing functions, but leave theoutputs in their current state. If the start input is applied during Reset, a new timing cycle will begin onthe trailing edge of the Reset signal.
Start
OUT 1
OUT 2/Batch
P1 P1
1 2
Reset
ON DELAY W / BATCH
An Inhibit input will halt all timing functions, butleave the outputs in their current state. If the startinput is applied during Reset, a new timing cycle willbegin on the trailing edge of the Reset signal. TheRemote Reset will only reset the Batch Count valueafter the Batch Preset has been reached, however, theBatch Count value can be reset at anytime via FrontPanel Reset.
Start
OUT 1
OUT 2/Batch
P2
1
2
P2
BTReset
P1P1P1
ON DELAY/INTERVAL W / BATCH
An Inhibit input will halt all timing functions, butleave the output in their current state. A reset singalis not reuired to start a new P1 cycle. The RemoteReset will only reset the Batch Count value after theBatch Preset has been reached, however, the BatchCount value can be reset at anytime via Front PanelReset.
Start
OUT 1
OUT 2
P1
P2
Reset
Start
OUT 1
OUT 2
P1
P2
Reset
INTERVAL 1 - BEGIN TOGETHER
Activates DeactivatesPreset 1 On leading edge of On completion of P1,Timing start signal deassertion of the
Start Signal or ResetPreset 2 On leading edge of On completion of P2,Timing start signal deassertion of the
Start Signal or ResetOutput 1 On leading edge of On completion of P2,
start signal deassertion of the Start Signal or Reset
Output 2 On leading edge of On completion of P2,start signal set deassertion of the
Start Signal or Reset
An Inhibit input will halt all timing functions, butleave the outputs in their current state.
Start
OUT 1
OUT 2
P1
P2
Reset
INTERVAL 2 - BEGIN TOGETHER
Operates the same as the Interval 1 - Begin TogetherMode, except the start input does not have to besustained to continue operation. An Inhibit input will halt all timing functions, but leave the outputs in their currentstate.
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetPreset 2 On leading edge of On completion of P2Timing start signal or ResetOutput 1 Upon completion of P1 On ResetOutput 2 Upon completion of P2 On Reset
Aktivierung DeaktivierungPreset 1 On leading edge of On completion of P1Timing start signal or ResetPreset 2 On activation of Output 1 On completion of P2Timing or ResetBatch Accumulates on falling On Reset, only afterCount edge of Output 1 the Batch Count
Preset is reachedOutput 1 On completion of P1 On completion of P2
or ResetOutput 2 When the Batch Count On completion of
value equals the Batch BatchOutput time or Preset Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetPreset 2 On activation of Output 1 On completion of P2Timing or ResetBatch Accumulates on falling On Reset, only afterCount edge of Output 1 the Batch Count
Preset is reachedOutput 1 On completion of P1 On completion of P2
or ResetOutput 2 When the Batch Count On completion of
value equals the Batch BatchOutput time or Preset Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetPreset 2 On leading edge of On completion of P2Timing start signal or ResetOutput 1 On leading edge of On completion of P1
start signal or ResetOutput 2 In leading edge of On completion of P2
start signal or Reset
tico 742
Components 2001246 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Timing Diagrams High Performance 0 742 2xx
INTERVAL 1 - END TOGETHER
An Inhibit input will halt all timing functions,but leave the outputs in their current state.
Start
OUT 1
OUT 2
P1
P2
Reset
INTERVAL 2 - END TOGETHER
Operates the same as the Interval 1 - EndTogether mode, except the start input does nothave to be sustain to continue operation. AnInhibit input will halt all timing functions, butleave the outputs in their current state.
Start
OUT 1
OUT 2 P2
P1 P1P1
Reset
INTERVAL 1 - SEQUENTIAL
An Inhibit input will halt all timing functions, butleave the outputs in their current state.
Start
OUT 1
OUT 2 P2
P1 P1
Reset
INTERVAL 2 - SEQUENTIAL
Operates the same as the Interval - Sequencialmode, except the start input does not have to besustained to continue operation. An Inhibit inputwill halt all timing functions, but leave the outputs in their current state.
Start
OUT 1
OUT 2
P1
P2
Reset
Start
OUT 1
OUT 2/Batch
1 2
BCT
P1 P1
Reset
INTERVAL 1 - BATCH
It is not necessary to reset the timer to begin anew interval, however reset is required to set thebatch count value back to 0. An Inhibit input willhalt all timing functions, but leave the outputsin their current state.
INTERVAL 2 - BATCH
Operates the same as the Interval - Sequencialmode, except the start input does not have tobe sustained to continue operation. It is not necessary to reset the timer to begin a new interval, howe-ver reset is required to set the batch count value back to 0. An Inhibit input will halt all timing functions,but leave the outputs in their current state.
Activates DeactivatesPreset 1 On leading edge of On completion of P1,Timing start signal deassertion of the
Start Signal or ResetPreset Prior to completion On completion of P2,Timing of P1 by the amount deassertion of the
of time in P2 Start Signal or ResetOutput 1 On leading edge of On completion of P1,
start signal deassertion of theStart Signal or Reset
Output 2 Prior to completion On completion of P2, of P1 by the amount deassertion of the of time set in P2 Start Signal or Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetPreset 2 Prior to completion On completion of P2 Timing of P1 by the amount or Reset
of time set in P2Output 1 On leading edge of On completion of P1
start signal or ResetOutput 2 Prior to completion of P1 On completion of P2
by the amount of time or Resetset in P2
Activates DeactivatesPreset 1 On leading edge of On completion of P1,Timing start signal deassertion of the
Start Signal or ResetPreset 2 On completion of P1 On completion of P2,Timing deassertion of the
Start Signal or ResetOutput 1 On leading edge of On completion of P1,
start signal deassertion of theStart Signal or Reset
Output 2 On completion of P1 On completion of P2, deassertion of theStart Signal or Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1,Timing start signal or ResetPreset 2 On completion of P1 On completion of P2,Timing or ResetOutput 1 On leading edge of On completion of P1
start signal or ResetOutput 2 On completion of P1 On completion of P2
or Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1,Timing start signal deassertion of the
Start Signal or ResetBatch On trailing edge of On Reset Count Output 1Output 1 On leading edge of On completion of P1,
start signal deassertion of theStart Signal or Reset
Output 2 When the Batch Count On completion of theValue equals the Batch Batch Output Time orPreset Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetBatch On trailing edge of On ResetCount Output 1Output 1 On leading edge of On completion of P1
start signal or ResetOutput 2 When the Batch Count On completion of the
Value equals the Batch Batch Count Time or Reset Preset
tico 742
Start
OUT 1
OUT 2/Batch
P1
1 2
P1
BCT
P1
Reset
tico 007
247Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Timing Diagrams High Performance 0 742 2xx
OFF DELAY - BATCH COUNT
It is not necessary to reset the timer to begin anew interval, however reset is required to set thebatch count value back to 0. An Inhibit input willhalt all timing functions, but leave the outputsin their current state. Start signals will be accepted while the Batch Count Output is active.
Start
OUT 1
OUT 2/Batch
P2 P2
P1-T
P1 P1
Reset
1
ON/OFF DELAY - BATCH COUNT
Any transition of the start signal will effect thetiming operation: During the timing cycle for P1a transition will cause P1 to restart. A transitionof the start signal after P1 has completed willcause P2 to begin. Any transition of the startsignal prior to the completion of P2 (and thedeactivation of Output 1) will cause P2 torestart. An Inhibit input will halt all timing fun-ctions, but leave the outputs in their currentstate.
Start
OUT 1
OUT 2
t1 t2
t1 + t2 + t3 + t4 = P2
t1 + t2 + t3 =P1
Reset
t3 t4ACCUMULATIVE - ABSOLUTE(TIME COUNTER WITH 2 PRE-SETS)
Accumulates the time while Start is active. When the Time total reaches P1 the output OUT1 is activated.P1 and P2 are independent Presets.
Start
OUT 1
OUT 2
t1 t2
t2' + t3' = P2
t1 + t2 + t3 =P1
Reset
t3
t3't2'
AKKUMULIEREND - VORSIGNAL(ZEITZÄHLER MIT SCHLEPPVOR-WAHL)
Accumulates the time while Start is active.When the Time total reaches P1 the outputOUT1 is activated. P1 and P2 are independent
Start
OUT 1
OUT 2/Batch BCT
P1 P1
Reset
Start
OUT 1
OUT 2/Batch
t1 t2
Reset
t1 t2ACCUMULATIVE – BATCH
It is not necessary to reset the timer to begin anew interval, however reset is required to setthe batch count value back to 0. An Inhibitinput will halt all timing functions, but leavethe outputs in their current state. Start signalswill be accepted while the Batch Output isactive.
Activates DeactivatesPreset 1 On trailing edge of On completion of P1Timing start signal or ResetBatch On trailing edge of On ResetCount Output 1Output 1 On leading edge of On completion of P1
start signal or ResetOutput 2 When the Batch Count On completion of the
Value equals the Batch Batch Output TimePreset or Reset
Activates DeactivatesPreset 1 On change of state of On change of stateTiming the start signal of the start signal
or resetPreset 2 On change of state of On change of stateTiming the start signal after P1 of the start signal
has elapsed after P2 is active, or Reset
Batch Accumulates on falling On expiration of theCount edge of Output 1 Batch
Count Time or ResetOutput 1 On completion of P1 On completion of P2
or ResetOutput 2 When the Batch count On completion of
value equals the Batch BatchPreset Output time or Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing each start signal or ResetPreset 2 On leading edge of On completion of P2 Timing each start signal or ResetOutput 1 On completion of P1 On ResetOutput 2 On completion of P2 On Reset
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetPreset 2 Prior to completion of P1 On completion of P2Timing by the amount of time or Reset
set in P2Output 1 On completion of P1 On ResetOutput 2 Prior to completion of P1 On Reset
by the amount of time set in P2
Activates DeactivatesPreset 1 On leading edge of On completion of P1Timing start signal or ResetBatch On leading edge of On Reset, only afterCount Output 1 the Batch Count
Preset is reachedOutput 1 On leading edge of On completion of P1
start signal or ResetOutput 2 When the Batch Count On Reset, only after
Value equals the Batch the Batch Count Preset is reached
tico 742
tico 742 Timing Clock generator 0 742 7xx
Components 2001248 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
REPEAT CYCLE - BATCH/CONTINUE
The inhibit input will halt the timing functionswhile asserted, but leave the outputs in theircurrent state. Setting the Batch Count Presetto zero will disable output 2.
Start
OUT 1
OUT 2/Batch
P1 P2
1 2 3
P2
Reset
REPEAT CYCLE - BATCH/STOP
An Inhibit input will halt all timing functions,but leave the outputs in their current state. Ifthe start input is applied during Reset, a newtiming cycle will begin on the trailing edge ofthe Reset signal.
Start
OUT 1
OUT 2
P2
P2
Reset
P1
P1
REPEAT CYCLE - INTERVAL
The inhibit input will halt the timing functionswhile asserted, but leave the outputs in theircurrent state.
Start
OUT 1
OUT 2/Batch
P1 P2
1 2 3
Reset
0 742 501 TICO 742 Multifunction, LED, 100-240 VAC0 742 502 TICO 742 Multifunction, LED, 24 VAC/VDC
0 742 201 TICO 742 High Performance, relay, 100-240 VAC0 742 202 TICO 742 High Performance, relay, 24 VAC DC 0 742 251 TICO 742 High Performance, transistor, 100-240 VAC0 742 252 TICO 742 High Performance, transistor, 24 VAC/VDC
0 742 701 TICO 742 clock generator, relay, 100-240 VAC0 742 702 TICO 742 clock generator, relay, 24 VAC DC0 742 751 TICO 742 clock generator, transistor, 100-240 VAC0 742 752 TICO 742 clock generator, transistor, 24 VAC/VDC
1 740 111 Accessory: 11 pin socket
ORDERING INFORMATION
Activates DeactivatesCycle On leading edge of On completion of theTiming start signal Batch Count Value,
deassertion of the Start Signal or Reset
Batch Accumulates after each On reaching the Timing complete cycle Batch Count
Preset Value or ResetOutput 1 On leading edge or start On completion of P1
signal or after or Resetcompletion of P1-based on programming
Output 2 When the Batch Count On completion of the Value equals the Batch BatchPreset Count Time or Reset
Activates DeactivatesCycle On leading edge of On deassertion of theTiming start signal Start
Signal or ResetOutput 1 On leading edge of On completion of P1or start signal or after Reset
completion of P1-based on programming
Output 2 Mirror output 1 Mirror output 1
Activates DeactivatesCycle On leading edge of On deassertion of the Timing start signal Start Signal or ResetBatch Accumulates after On reaching the Count each complete cycle Batch Count Preset
Value or ResetOutput 1 On leading edge of start On completion of P1
signal or after or Resetcompletion of P1 - based on programming
Output 2 When the Batch Count On completion of the Value equals the Batch Batch Count Time orPreset Reset
249Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Tachometers
Typical applications:
Rev. count display and monitoring
Flow rate display and monitoring
Production speeds Motor revolution display
Turbine revolution display Simple rev. count control Rev. count monitoring Conveyor belt monitoring Feed monitoring Synchronous operation
monitoring
Tachometers register events that occur in a certain time interval. No matter whetherdelivery rates, rotational speeds or flow rates are measured, the measuring principleremains the same, only parameters and dimensions differ.
Tach
omet
ers
Components 2001250 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Tachometers
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
InputsFrequencyPrescaling factorMeasuring principle
DisplayReset input
Control inputs
Evaluation
Output
Page
Small, compact,5 different versions
Voltage supply via lithium cell or 12-24 VDC
8-digit LCD or 6-digit LED display
Display as Pulses/min. Type 1 and 2 with gate
measuring principle;Type 4 and 5 withfaster and more accu-rate period length measuring principle
Optional with prescaling function
48 x 24 x 32 short48 x 24 x 60 long45 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mm
IP 65Li battery, type 1+3,12-24 VDCPNP/NPN7.5 kHz / 30 HzOptional, 0.001-99.999Gate time Type 1+2; period length measurement; 1 /Tau Type 4+5Pulse/min.NPN type 1+2, NPN/PNP Type 4-5Optional: keylock or display hold inputCounter input
252
Multifunctional, usedas counter, tachome-ter, time counter, shiftor batch counter
Voltage supply 12-24VDC; 115 VAC, or 230VAC
6-digit LCD or LEDdisplay
Variety of program-ming functions
Without preset orwith 2 limit values
Display as pulses/sec.or pulses/min.
Programmable start-up suppression
Principle of periodlength measurement
48 x 48 x 93.5
45 x 45LCD 6-digit, 9 mmLED 6-digit, 7.6 mm
IP 6512-24 VDC, 115 VAC, 230 VAC versionsPNP/NPN5 kHz / 30 Hz0.001-999.999Period length measurement, 1/Tau
Pulse/sec. or pulse/minPNP/NPN
2nd counter input and gate inputCounter input, direction A-B, A+B; phase discriminatorNone; or 2 relay andtransistor outputs
258
Tachometer withlarge, 4-digit LCD display; illuminated
4 versions frequencydisplay, scaleabletachometer, tacho-meter with totalizingcounter; and tacho-meter with totalizingcounter and pulseoutput
Voltage supply viaexchangeable lithiumcell
Small mounting depth Expandable by a
variety of moduleoptions
10 versions offeringdifferent functions(same design)
72 x 36 x 36
68 x 33LCD 4-digit tachometerOptional: 8-digit totalizing counter; 12 mmIP 65Exchangeable Li battery
PNP/NPN10 kHz / 30 HzOptional 0.001-9999Period length measurement, 1/Tau
Pulse/sec.NPN
Keylock
Counter input
Optional as SSR output for pulse scaler
261
Large dual-colour, 5-digit LED display;digit height 18.5 mm
Programmable displaycolour
Upgrading options(e.g. RS 485); linearoutput
Service-friendly dueto plug-in system
2 versions tachometerand tachometer +totalizing counter
Complete functions by8 counter versions and5 process indicators
96 x 48 x 100
92 x 45LED 5-digit, 18.5 mmDual-colour
IP 6622-55 VDC / 20-50 VACor 90-264 VACPNP/NPN10 kHz / 200 Hz / 20 Hz0.0001-99999Period length measurement, 1/Tau
Pulse/sec.NPN
2nd counter input and keylockType 4: A, A/B, 1/A; Type 5: A, totalizingcounter; A+B; A-B; etc.Optional with linear output; 1 or 2 relay and transistor outputs264
Type tico 731 tico 732 tico 734 tico 735
251Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Tachometers
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)DisplayProtectionSupply voltage
InputsInput controlFrequencyPrescaler
Measuring principle
DisplayReset inputControl inputs
EvaluationOutput
Page
Large 5-digit LED display; digit height14 mm
Frequency range1/min. - 10000/s
Prescaling function0.001 - 9.999; expandable via divisor
Easy to service bymeans of plug-typescrew terminals
Programmable start-up suppression
With or without limitvalues for frequencymonitoring
96 x 48 x 10892 x 45LED 5-digit, 14 mmIP 5412-24 VDC or 100-240 VAC
PNP10 kHz / 30 Hz0.001 - 9.999 and divisor 0-9999Period length measurement1/TauPulse/min. or pulse/sec.PNPKeylock and display hold inputCounter inputNone, or 2 relays
267
Type signo 722
tico 731
Components 2001252
Flexible Counter Seriesin DIN size 24 x 48 mm
E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
high contrast 8-digit LCD display or brilliant 6-digit LED display different supply voltages available:
– independent of mains supply with lithium battery or– maintenance-free and with 12-24 V DC supply
also high-voltage input 12-250 V AC/V DC up to 8 different functions for each standard model:
01 pulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh,hh)05 numerical display for the PLC (serial)06 bidirectional position indicator07 counter with differencial mode08 maintenance counter (on request)
OVERVIEW
Standard Models Type 1 Type 2 Type 3 Type 4 Type 5
HardwareDisplay 8-digit LCD 8-digit LCD 8-digit LCD 8-digit LCD 6-digit LEDSupply voltage Lithium battery 12 – 24 VDC Lithium battery 12 – 24 VDC 12 – 24 VDCNominal data 7 years NV-FRAM 7 years NV-FRAM NV-FRAMretention > 10 years > 10 years > 10 yearsActive edge x x x x xnegative or positiveedge programmableAmplitude thresholds < 0.7 and < 0.7 and < 3 V and < 0.7 and < 0.7 and
> 5 V, max. 30 V DC > 5 V, max. 30 V DC > 12 V > 5 V, max. 30 V DC > 5 V, max. 30 V DCmax. 250 V DC/AC
Counting frequency max. 7.5 kHz or max. 7.5 kHz or 20 Hz max. 7.5 kHz or max. 7.5 kHz orprogrammable 30 Hz attenuated 30 Hz attenuated 30 Hz attenuated 30 Hz attenuatedControl inputs Reset and Keylock Reset Reset and Keylock Reset and Reset and
application input application inputKeylock external input programmable external input programmable programmableMounting depth 32 mm 32 mm 60 mm 60 mm 60 mm
SoftwareImpulse counter x x x x xTachometer 1/min x x x xTime counter h : 1/100 h x x x x xTime counter h : min : s x x x x xNumerical display for PLC x x xPosition indicator x xbi directionalCounter with differencial mode xMaintenance counter (on request) x
253Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
LCD display Lithium battery COUNT: programmable count input
for voltage signal or contact, frequency 7.5 kHz or 30 Hz
HOLD: Display memory inputcontact (negative, 30 Hz)
KEYLOCK: locking of the Hold buttom
Gate measurement with 6 s measuring time in Imp/min
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 8-digit LCD, 7 mmSupply voltage Ub internal lithium batteryNominal data retention lithium battery: 7 years
Inputs:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max 30 V DCActive edge negative or positive edge programmableCounting frequency max. 7.5 kHz
Control inputs:Display Hold - manual via keyboard (can be locked)
- external Hold with static behaviour, active edge negative 30 Hz
ORDER NUMBER
TYPE 1
DIMENSIONSCONNECTION DIAGRAM
/Hold
Terminal assignment:
Dimensions in mm
Clamping frame
Connecting terminal
tico 731
0 731 1 S0 2Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)
* * Option: with plug-inscrew terminals
Model tico 731
Technical data tico 731
Components 2001254 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical datatico 731
Model tico 731
0 731 2 S0 2Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PC
* * Option: with plug-inscrew terminals
ORDER NUMBER
TYPE 2
LCD display DC supply voltage 12 – 24 V DC COUNT: programmable count input
for voltage signal or contact, frequency (7.5 kHz or 30 Hz)
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 8-digit LCD, 7 mmSupply voltage Ub 12 ... 24 V DCCurrent consumption DC 12 ... 24 V DC < 5 mANominal data retention nonvolatile memory > 10 years
Inputs:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts)
Control inputs:Hold - manual hold via keyboard (can be locked)
- external hold with static behaviour, active edge negativeattenuated 30 Hz
Hold lock programmable via front key
HOLD: Display memory inputcontact (negative, 30 Hz)
KEYLOCK: locking of the Hold buttom
Gate measurement with 6 s measuring time in Imp/min
DIMENSIONSCONNECTION DIAGRAM
/Hold
Terminal assignment:
Dimensions in mm
tico 731
Clamping frame
Connecting terminal
255Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 731
TYPE 4 LCD display 12-24 V DC supply voltage COUNT: programmable count input
for voltage signal or contact, frequency 7.5 kHz or 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 8-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 yearsCount input:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts)
with position indicator 2 kHz: active edge positiveControl inputs:Input 2: (Hold) - manual hold via keyboard (can be locked)
- external hold with static behaviour, active edge negativeattenuated 30 Hz
Hold lock programmable via front key
exactly period measuring princip(1/Tau)
INPUT 2: control input for displaymemory (Hold)
Long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
Model tico 731
0 731 4 0 2Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
Components 2001256 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical datatico 731
TYPE 5 LED display 12-24 V DC supply voltage COUNT: programmable count input
for voltage signal or contact, frequency 7.5 kHz or 30 Hz
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProjection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 6-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 yearsCount input:Amplitude thresholds voltage input up to 7.5 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge negative or positive edge programmableCounting frequency programmable: 7.5 kHz or 30 Hz (attenuated for contacts)Control inputs:Input 2: (Hold) - manual hold via keyboard (can be locked)
- external hold with static behaviour, active edge negativeattenuated 30 Hz
Hold lock programmable via front key
exactly period measuring princip(1/Tau)
INPUT 2: control input for displaymemory (Hold)
Long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
Model tico 731
0 731 5 0 2 Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm::ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator07 counter with differential mode (1 kHz)
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mm Clamping frame
Connecting terminal
Headline hier
257Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Special functions tico 731
SPECIAL FUNCTIONS
ORDER NUMBERSPECIAL VERSIONS
To best match your application, you can order special functions such as prescalervalue, decimal point and preset value, which are permanently set by us before deli-very. With the variable prescaler value you can adapt to already existing transferratios of your application. Small resolutions can be shown with the decimal point,e. g. for the position indicator or the tachometer. A special feature is the possibility of displaying an information text in the display,e. g. for the surveillance of maintenance cycles. In this case the desired informationis shown in the display after reaching the fixed preset value. You can display any textthat can be created with the 7-segment alphabet, e. g. STOP, HELP, FILTER etc.
ORDER NUMBERSPECIAL VERSIONS
Special functions Impulse Tacho- Time Numerical Position Counter withfor counter meter counter display indicator differential work
Preset value x x x x0,001 bis 99,999Decimal point x x x x0 to 3 positionsbehind the commaPreset value x x0 to 99 999 999Information text x x(on reaching thepreset value)LCD = 8 charactersLED = 6 characters
1) not available for standard type 3
2) not available forstandard types 1, 2, 3
3) only available forstandard type 5
Model tico 731
0 731 7
Standard version:1 Standard model 12 Standard model 23 Standard model 34 Standard model 45 Standard model 5
Function:1 Impulse counter2 Tachometer (1/min)1)
3 Time counter (hhhh:mm:ss)4 Time counter (hhhhhh.hh)6 Position indicator (2-channel)2)
7 Counter with differential mode3)
4) not available for time counters5) not available for tachometers
and position indicator
P: (Value);
D: (Value);V: (Value);T: (Text);
Choose version and basic function:
Please state the desired special version on your order:
Prescaler value: 0.001 to 99.9994)
Decimal point: 0 to 3 positions after the comma4)
Preset value: 0 to 99 999 9995)
The information text displayed on reaching the preset value can be built up as required from the 7-segment alphabet
S* Option: with plug-in
screw terminals only for standard model 1, 2*
tico 732
Components 2001258 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Bi-directional Multifunctional-Counter
high-contrast LED or LCD-display, 6 digits small and compact DIN dimensions 48 x 48 mm easy operation by one key per digit direct access to parameters available with 1 or 2 presets transistor and relay with changeover contact, for each preset with integrated separate totalizer 5 basic functions easily programmable: counter, tachometer, time counter, shift
counter and batch counter display range from – 99999 to 999999
F1 F2 PSC PRG F1 F2 PSC PRG
F1 PRG PRGF2 PRGPSC
Reset
R 46
E
E
E
5 E 6
E
E
E
32E
E
1E
count mode
programming mode
and POWER ON and POWER ON
> 5 sec
preset 1 preset 2 prescaler function-parameter e.g. Basic-function*
count modedecimalpointreset/set-modesignal lengthpnp/npn-selectionreset modeoutput memorytime counter-tachometerkeylock for:manual resetpreset 1 or 2prescaler
* only formultifunction version
countertachometertime countershift counterbatch counter
PROGRAMMING
The important values, preset 1, preset 2, prescaler and separate totalizer can be direc-tly selected. It is necessary only to press the relevant button and the E-buttontogether. To make the operation still more easy, access to those values can be lockedseparately. All other system parameters like operation and count modes are laid downin a common operation level. These parameters are usually programmed once onlyduring the first initiation.
tico 007
259Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 732
Display LED or LCD, 6 digits, leading zero suppression, decimal pointDigit height LED 7.6 mm; LCD 9 mmSupply voltage 12...24 VDC; 24 VAC; 115 VAC; 230 VAC; 50/60 Hz,
depending on versionCurrent consumption 12...24 VDC < 150 mA
100/115/230 VAC < 50 mA; including sensor supplySensor supply only when AC operated: 12 ... 30 VDC, max 50 mAData retention non-volatile memory > 10 yearsOperating temperature 0 ... +50 °CStorage temperature - 20 ... + 70 °CElectrical connection screw terminalsMounting with clamping frameProtection class (IEC 144) front side IP 65, terminals IP 20Vibrostability 10 m/s2 (10...150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to VDE 0411, DIN 57411, protection class IIApprovals UL + CUL E 96337Amplitude thresholds < 2 V and > 8 V, max 40 VDCActive edge programmable; positive with pnp input; negative with npn inputPulse shape any (squarewave 1:1 for max. frequency)Input resistance approx. 10 kOhm (static)Counting frequency max. 5 kHz (2.5 kHz bi-directional)Prescaler programmable from 0.001 to 9.999 (999.999)Count inputs A, B - phase discriminator with single evaluation
- differential mode (add/sub)- count direction mode- totalizing mode (add/add)
Pulse length min. 17 ms (30 Hz), 100 µs (5 kHz)Control input C - manual reset possible
- external reset, static or dynamic, programmable,pulse length > 5 ms
- automatic reset when main preset has been reached (programmable)
Relay changeover contact max. 250 VAC / 30 VDC, min. 5 V AC/DCmax. 1 A, min. 10 mA, delay < 5 ms
Transistor pnp output 12...24 VDC max 10 mA of DC supply;12…30 V DC max 10 mA of AC supply
Method time interval (1/Tau)Display range 1/min or 1/secMin input frequency 0.125 Hz = 8 secAlarms 2 alarms with programmable start-up-suppressionTime bases programmable; sec, min., h or hh.mm.ssResolution programmable 1; 0.1; 0.01; 0.001Function single pulse measurement (short time meter) or cummulated
counting (hour meter)Count mode pulse width or period measurement (start-stop)
DIMENSIONSCONNECTION DIAGRAM
TECHNICAL DATA
General
Counter
Tachometer
Time counter
Dimensions in mm
clamping frameplug terminal
tico 732
Components 2001260 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Display Preset 12–24 VDC 24 VAC 115 VAC 230 VAC
LCD – 0 732 000 0 732 071 0 732 037 0 732 001LCD 1 0 732 002 0 732 073 0 732 039 0 732 003LCD 2 0 732 012 0 732 078 0 732 049 0 732 013LED – 0 732 018 0 732 080 0 732 055 0 732 019LED 1 0 732 020 0 732 082 0 732 057 0 732 021LED 2 0 732 030 0 732 087 0 732 067 0 732 031
Important: Only versions with 2 presets or without preset can be used as tachometers.
ORDER INFORMATION
Display
LCD
LED
Function
Tacho
Shift counter*
Batch counter*
no output
1 output(1 relay,1 transistor
2 outputs(2 relays,2 transistors)
12 - 24 VDC
230 VAC
Outputs Power supply
Counter +totalizer
100 VAC
115 VACTimecounter +totalizer
CONNECTING DIAGRAM
POSSIBLE VARIANTS
Multifunctional version: Article No.: 0 732 0 B
For versions with no output, pins 7–9 and 15-17 are not connected.
VDC 1 Rel/1 Trans
VDC 2 Rel/2 Trans
VAC 1 Rel/1 Trans
VAC 2 Rel/2 Trans
tico 007
261Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Flexible Counter Seriesin DIN size 36 x 72 mm
tico 734
Verwendbare Optionsmodule: 1 734 010 … 0204 Input A, 10 kHz, Mag.3 Input A, 30 Hz, NPN2 Input A, 10 kHz, PNP1 0V, Common5 Not used6 Not used7 Not used8 DC-supply for backlightingSuitable option modules: 1 734 0.. 10, 12, 14, 17, 19
Tachometer (0 734 003)No programming, displays in Hz (creates rpm display with an encoderwith 60 pulses per revolution), 4 digit, magnetic input for measurement system not requiring external power
4 Input A, 10 kHz, Mag.3 Input A, 30 Hz, NPN2 Input A, 10 kHz, PNP1 0V, Common5 Program enable6 Not used7 Not used8 DC-supply for backlighting
Programmable Rate Meter(0 734 004)4 digit, scale multiplier 0.001 to 9999,decimal point magnetic input for measurement system not requiring external power
Suitable option modules: 1 734 0.. 10, 12, 14, 17, 19
MODEL OVERVIEW
Rate Meter with Totaland Pulsed Output (0 734 009)As above, additionally with SSR pulsedoutput with programmable 0.0001 to 0.9999 reducing factor, resetkey can be enabled/disabled
Rate Meter with Totaliser(0 734 005)4 digit rate (indicated by R), scale multiplier 0.001 to 9999, decimal point or dummy zero digit8 digit totaliser, prescaler 0.0001 to99.9999, decimal point
4 Remote reset, NPN3 Input A, 30 Hz, NPN2 Input A, 10 kHz, PNP1 0V, Common5 Program enable6 Not used7 Not used8 DC-supply for backlightingSuitable option modules: 1 734 0.. 10, 12, 14, 17, 19
4 Remote reset, NPN3 Input A, 30 Hz, NPN2 Input A, 10 kHz, PNP1 0V, Common5 Program enable6-7 Output SSR (Form A)8 DC-supply for backlightingSuitable option modules: 1 734 010 … 020
LCD display, 8 digits, 12 mm height, excellent contrast through Backlighting with a 10-28 VDC supply Lithium battery power supply Decimal point, input scaling, count direction, output mode, etc. programmable,
depending on model Programming reduced to a minimum for easy handling and set-up CE approval, IP 65, NEMA 4 Suitable for TTL Mounting depth 29 mm
The family tico 734 consists of ten models:0 734 000 Totalizer without scaling0 734 001 Add/Subtract totalizer0 734 002 Position indicator0 734 003 Tachometer0 734 004 Programmable rate meter0 734 005 Rate meter with totalizer0 734 006 Time counter0 734 007 Preset counter0 734 008 Time preset counter0 734 009 Rate meter 005; with total and pulsed output
Components 2001262 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Internal Single or dual lithium 3 V battery (CR 1/2 AA), typical lifetime of 5 years (10 yrs w/2 batteries). „Lo BAT“ display flashes approximately 2 weeks prior to end of battery life. Models w/SSR: battery life approx. 6 months (50 % duty cycle) can be extended to 5 years with option module
via Option Module 120/240 VAC provides 12 VDC for display backlighting and reduces battery load in models with SSR output
Display LCD, 12 mm height, 8 digits for counters, 4 digits (plus dummy zero) for tacho and rate meters, 6 digits timer
Backlighting Whole display area can be backlit with a 10-28 VDC supply,green-yellow colour
High Speed Input (2) PNP, ≤ 28 VDC, max. 10 kHz (50 % duty cycle), Low < 1.0 V,High > 2.0 V, impulse > 45 µs, impedance 1 MΩ
Low Speed Input (3) NPN, ≤ 28 VDC, max. 30 Hz (50 % duty cycle), Low < 1.0 V, High > 2.0 V, impedance 1 MΩ
Magnet- inputHigh Voltage Option 100..260 VAC/DC, 30 Hz, 1 MΩ, with internal Module connection to input (3)Low Voltage Option 5..30 VAC/DC, 30 Hz, 17 kOhm, with internal connection Module to input (3)Enable Input (5) NPN, ≤ 28 VDC, level sensitiveReset Input (4) NPN, ≤ 28 VDC, edge triggered, max. 30 Hz (50 % duty cycle)SSR Relay Photomos relay, 0.1 A, 30 VAC/DC, reaction time < 5 msRelay Option Module Changeover contact 5 A, 120/240 VAC or 30 VDCMounting Front panel mounting with mounting bracketDimensions DIN 36 x 72 mm, 36 mm total depth, total width 83 mmPanel Cutout 33+0,3 mm x 68+0,3 mm, depth behind panel < 29 mmPanel Thickness max. 8 mmFront Panel Rating IP 65 / NEMA 4Operating and Storage 0 °C to + 55 °CTemperature - 20 °C to + 60 °CGeneral DIN EN 61010 part 1 / VDE 0411 part 1
Protection according to class II, Contamination level 2 Overvoltage category II
Control Inputs
Output (only 009)
Physical
Environmental
Count Inputs
Display
Power Supply
DIMENSIONS
Technical datatico 734
A: gasket, B: mounting bracketincl. option modul
Dimensions in mm
1) Panel cutout: 33 x 68 mm2) Panel thickness: max 8 mm
263Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 734
FUNCTIONS OVERVIEW
Power 115 VAC or 230 VAC (see wiring), frequency 50/60 Hz. Terminal (8) provides Supply (E-H) an unregulated 10-20 VDC supply for powering sensors up to 50 mARelay Type: SPDT (Form C) mechanical relay; Operate Time: 6 msOutput 5A, 120/240 VAC or 30 VDC, silver alloy(A-B-J) Electrical Life: > 500 000 operations, Mechanical Life: > 10 million operationsHigh Voltage Range: 100 to 260 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 200 kOhmLow Voltage Range: 5 to 30 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 17 kOhmMounting Attaching on back of instrumentDimensions 42 x 69 mm, depth 58 mm, total depth behind panel with instrument 82 mmTemperature Operating: -0° C to +50° C; Storage -20° C to +60° C;General DIN EN 61010 part 1, Protection according to class II
Contamination level 2; Overvoltage category II
OPTION MODULES
With the Option Modules, the tico 734 can be functionally extended and adaptedto special application conditions. The following option functions are available: AC power supply providing sensor supply 10-20 VDC / 50 mA and 12 V supply
for display backlighting (supports the battery in models with SSR output) Relay output, changeover contact, 5 A, 120/240 VAC or 30 VDC High voltage input (100..260 VAC/DC, max. 30 Hz, 200 KΩ)
Connections 010 011 012 013 014 015 016 017 018 019 020
High Voltage Input C-D x x x xRelay 1 x change over A-B-J x x x x x x AC power Supply E-F, G-H x x x x x xLow Voltage Input C-D x x x x
1734 …
TECHNICAL DATA
WIRING
ORDERING INFORMATION Panel Instruments
Totalizer 0 734 000Add/Subtract Totalizer 0 734 001Position Indicator 0 734 002Tachometer 0 734 003Programmable Rate Meter 0 734 004Rate Meter with Totalizer 0 734 005Elapsed Time Indicator 0 734 006Preset Counter 0 734 007Preset Timer 0 734 008Rate Meter with Total 0 734 009and Pulsed OutputLithiumbattery E3533 355
Option Modules
HV Input 1 734 010Relay 1 734 011AC Power 1 734 012HV Input and Relay 1 734 013HV Input and Power 1 734 014Power and Relay 1 734 015HV Input/Power/Relay 1 734 016LV Input 1 734 017LV Input and Relay 1 734 018LV Input and Power 1 734 019LV Input/Power/Relay 1 734 020
All modules contain 17 terminals. Theexact functions that are present aredetermined by the model of instrumentand option module (see Functions Over-view).1-8 Connection to instrument
(refer to appropriate operatinginstructions)
A Normally Open Relay ContactB Relay CommonJ Normally Closed Relay ContactC-D High or Low Voltage Input, no
polarity, (provides NPN signalon terminal 3)
E-F 115 VAC Line winding IG-H 115 VAC Line winding II
tico 735
Components 2001264 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Flexible Counter Series, Dual Colour Display,in DIN size 48 x 96 mm
RATE METER + TOTALIZER
TACHO/RATE METER Input Modes, Features Value Range
A, A/B, 1/A (displays the impulse duration) 0...99999Extended Rate Calibration Factor 0.0001...99999Upper and Lower Range Value 0...99999Display refresh and Zero display time 0.1 ... 10 SecMinimum impulses for display start 1 .. 99Alarm suppression during startup, Hold function 0...99 SecOption: Linear Output, scalable, isolated 0/4-20 mA, 0/1-5 V, 0/2-10 V
A+B, A-B, Direction, Quad 0...99999Totalizer 0...99999Extended Rate Calibration Factor 0.0001...99999Upper and Lower Range Value 0...99999Display refresh and Zero display time 0.1 ... 10 SecMinimum impulses for display start 1 .. 99Alarm suppression during startup 0...99 SecOption: Linear Output, scalable, insulated 0/4-20 mA, 0/1-5 V, 0/2-10 V
COUNTING - MEASURING - INDICATING - MONITORING - TRANSMITTING
Because of the unlimited number of measurements it can handle, the tico 735 devicefamily is equally well suited to applications in the world of impulse and time coun-ting as to those in the processing area.If you are looking for display clarity and high levels of accuracy, then the tico 735is the right choice for you. The dual-colour display is unique, highlighting an alarmsituation or an excess value at a single glance. You can programs your own choiceof display colour to indicate normal or alarm conditions.
FEATURES Brilliant 18.5 mm high dual-colour red/green LED display with programmablecolour settings
As standard, all models have limit or preset values Scaling available as standard Universal power supply 90...264 V AC or 20...50 V AC/DC Simple structured operation with switchable help function
External Program Lockout DIN housing 48 x 96 mm, mounting depth < 100 mm Conveniently sized screw terminals Large keys offer safety and ease of operation
NPN and Relay Outputs Option: RS 485 ASCII protocol serial interface for all versions. ”Remote Display”
version receives process values over RS 485
Technical data tico 735
265Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONED DRAWINGS
DISPLAY AND KEYBOARD
PHYSICAL
OPERATING CONDITIONS
APPROVALS
OPTION LINEAR OUTPUT
OPTION RS 485
Primary Display Red/Green, 7 segment LED, 5 digits, height 18.5 mmSecondary Display single digit 7 segment LED, height 7 mm, red/greenOutput Indicators 2 red LEDs for OUT 1 and OUT 2 statusKeyboard 4 rubber keys for programming and manual reset
Front Dimensions DIN 48 mm x 96 mm, 110 mm total depthMounting Front panel mounting (mounting bracket supplied)Panel Cutout 45 mm x 92 mm, panel thickness max 12 mmConstruction Front carrier with PCBs can be pulled outTerminals Screw Type (combination head)
Power Supply 90 - 264 V AC 50/60 Hz (electrically separated from all inputs and outputs) or 20...50 V AC / 22...55 V DC
Temperature Operation: 0 °C to +55 °C (32 °F to 131 °F)Storage: -20 °C to +60 °C (-4 °F to 176 °F)
Relative Humidity 0 to 90 %, non-condensing
Protection class Frontpanel IP 66CE EN 50082-1/92-95; EN 50081-1/92, -2/94Safety DIN EN 61010 part 1; protection according to class IIGeneral UL, CUL, Overvoltage cat. II, Contamination level 2
Insulation optically isolated, 250 V AC or 400 V DC from all inputs and outputs
Output Ranges 0-20 mA, 4-20 mA, 0-10 V, 2-10 V, 0-5 V, 1-5 VAccuracy ± 0.25 % (mA on 250 Ohms, V at 2 kOhm);
Deviation ± 0.5 %Resolution 8 bits after 250 ms (10 bits after 1000 ms typically)Updates approx. 4 per secondLoad mA: max 500 Ohm, V: min. 500 Ohm
Type RS 485, serial asynchronous, Open ASCII, Master-Slave, up to 99 zones
Parameters 9600...1200 Bd, 1 start, 7 data, 1 stop, even parity
10096
48
tico 735
PGM RST
Dimensions in mm
tico 735 Technical data
Components 2001266 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
ORDERING DATA
129 8 7 6 5 4 3
10
11
12
13 14 15 16 17 18 19 20 21
22
23
24
RS 485B A + 0V Relay OUT1
LinearOutput
+
-
0V
OU
T1N
PN
CTRL
1
CTRL
2
Aux.
Pow
er
0V
Inpu
t A
Inpu
t B
OU
T2N
PN
NC
RelayOUT2
NC
~ ~90-264 VAC
22-50 VDC/ACor
TERMINALS
SPECIAL FEATURES
CONTROL INPUTS
OUTPUTS
COUNT INPUTS
MAGNETIC INPUT
Active Edge NPN or PNP programmable; capable of TTL; 30 V DC maxwith PNP High ≥ 3.0 V, Low < 2.0 V or open; 10 kOhm to 0 Vwith NPN High ≥ 3.0 V or open, Low < 2.0 V; 4.7 kOhm to V+Frequency 20 Hz, 200 Hz or 10 kHz programmable
Type Capacitive; 0.5 to 30 V (only available for Rate Meters)
CTRL1 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+ (Reset or hold) edge sensitive; 25 ms min., max 30 V DCCTRL 2 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+(Progr. security)) level sensitive; 25 ms min.; max 30 V DC
OUT 1 NPN NPN, open collector; 30 V DC max; 100 mA maxOUT 2 NPN response time < 75 µsRelay 1, Changeover (Form C); 240 V AC / 3A or 110 V AC / 5 A; pull-in Relays 2 (opt.) time 8 msAuxiliary 9...15 (unregulated V DC), 125 mA max; residual ripple < 0.5 VPower Supply
Display colour programmable Count Calibrator 0.0001 to 9.9999 as standard Preset Lockout and Reset Disable programmable Program Security via CTRL 2 Hold function on Tacho version Optional Linear Output
0 7 3 5 P
Type 0735 P
Function1 Totalizer2 Position Indicator4 Tacho/Rate Meter5 Rate + Totalizer6 Time Counter7 1 Preset Counter8 2 Preset Counter9 Batch Counter
Power Supply0 90…264 V AC2 20…50 V AC or
22…55 V DC
Output Relay 20 none1 with Relay 2
nicht für Funktion1, 6, 7
Interface0 none5 with RS 485
Linear Output0 none3 with 4-20 mA
(only with function 2, 4, 5)
Option module Ordering codeRelay 2 1 901 001Linear output 1 901 003RS 485 interface 1 901 004
tico 007
267Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Frequency range 1/min ...10 000/s 2 limit values can be preset Large 5-digit LED display, digit height 14 mm Prescaler range 0.001 ... 9.999 can be expanded with pre-divisor Programmable start-up suppression Simple operation DIN dimensions 48 x 96 mm Plug-in screw terminals
Tachometers with or without Limit Values
Type 722
DISPLAY
PROGRAMMING
Input level 1:
A 5-digit LED display for speed indication.0.00 indicates standstill of pulse generator (machine)–––– indicates display overflow
B LED indicators show program steps and unit of measurement.
A variety of programming options is available on three input levels.
Provides access to program steps in which numeric values can be requested and entered.
Components 2001268 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 722 Technical data
Alteration of the factory-set standard functions pre-divisor and start-up suppression.
UNIT OF MEASUREMENT Tachometers signo 722 can be used for registration of almost any time-related mea-suring dimensions. In consideration of the wide range of different measurement units,a decal foil with the most common units is provided to label the tachometer.
Programming of equipment/machine-specific parameters.Input level 2:
Input level 3:
tico 007
269Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Display 5-digit, LED, programmable decimal pointDigit height 14 mmSupply voltage Vop 12 ... 24 VDC - 5 % + 10 %, 24 VAC + 10 %, 100 ... 240 VAC + 10 %, depending on versionCurrent consumption on 12 ... 24 VDC < 300 mA, on 24 VAC < 200 mA,
on 100 ... 240 VAC < 150 mASensor supply AC versions 24 VDC, max. 60 mA
DC versions Vop - 2 V max. 60 mAMeasuring time one period at f < 4 Hz, periods of T = 250 ms at f > 4 HzMeasuring accuracy 0.01 % + 1 digitRefresh time approx. 1 secondValue retention approx. 10 years, NV RAM (no battery)Operating temperature 0 ... + 50 °CStorage temperature - 20 ... + 70 °CElectrical connection plug-in screw terminalsMounting clamping frameProtection class (IEC 144) front IP 54, connections IP 20Interference immunity EMC severity 3 acc. to IEC 0801 - pt. 2 + pt. 4General design acc. to DIN VDE 0411; protection class II
InputAmplitude thresholds < 2 V and > 8 VDC, max. + 40 VActive edge positivePulse shape random (squarewave 1:1 for max. frequency)Input resistance 5 kΩ
Count inputCounting frequency range 1/min ... 10 000/s
Control inputsKeylock staticDisplay memory staticOutputs depending on versionSignal outputs OUT-LOW and OUT-HIGH
RelaysContact type changeover contacts with snubberSwitching voltage max. 50 VDC/250 VAC ref. to groundSwitching current max. 1 A
TECHNICAL DATA
Technical data Type 722
Components 2001270 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Type 722 Technical data
CONNECTION DIAGRAM
DIMENSIONED DRAWING
Ordering code Ordering code Ordering code12 … 24 VDC 24 VAC 100 … 240 VAC
Tachometer without limit value 0 722 201 0 722 203 0 722 202 Tachometer with limit values 0 722 101 0 722 103 0 722 102
Adapter panel frame 125 x 60 mm (cutout 106 x 55 mm) 1 405 679
* versions with limit values only
Dimensions in mm
ORDER INFORMATIONTachometer
Accessories
Plug-in terminal Clamping frame
271Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatics
Pneu
mat
ics
Typical applications:
Quantity counting Stroke counting Order and daily production
value recording Service life and maintenance
counter Packaging unit control Time control with manual
intervention
Fully automatic time control Clock generator Purely pneumatic cylinder
limit switches Door opening times Process step control Dosage rate control
There are applications for these components in all areas of automationwhere pneumatic actuators such as cylinders or grippers are used, par-ticularly in environments where no electric signals can be used becauseof the danger of explosion. Further examples of uses are door controlwith track vehicles or controlling mixing in dosage equipment.
Using the building blocks offered by Hengstler’s pneumatic range, youcan construct your own control systems which are only pneumaticallydriven.
Components 2001272 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Totalizing, Preset and Preset Time Counters
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
Operating pressureAir
InputsCount input
Frequency/Time format
Options
Reset input
Output
Page
Integrated totalizingcounter
6-digit or 8-digit display
Manual reset, pneumatic reset, orwithout reset function
Hose coupler or rapid-fit connector
Easy to install Maintenance-free
operation
60 x 51 x 6552 x 268-digit 4 mm6-digit 4 mm2-8 barFiltered (< 40 µm) oil-free
Adding
25 Hz / 8 ms
Hose coupler M5; orrapid-fit connector
Manual, pneumatic,or without reset function
276
Surface-mount totali-zing counter
6-digit display Manual or pneumatic
reset Hose coupler or
rapid-fit connector Easy to mount Maintenance-free
operation
53 x 100 x 26
6-digit, 4 mm
2-8 barFiltered (< 40 µm) oil-free
Adding
25 Hz / 8 ms
Hose coupler M5, orrapid-fit connector
Manual or pneumatic
278
Integrated presetcounter
Adding or subtracting 3-digit or 5-digit
display Integrated pneumatic
reset Convenient button
setting Adding; with
continuously visiblepreset
60 x 75 x 6252 x 523-digit 4 mm5-digit 4 mm2-8 barFiltered (< 40 µm) oil-free
Adding, subtracting; depending on version20 Hz / 8 ms
With automatic reset; hose coupler M5, or rapid-fit connectorManual, pneumatic orautomatic
On reaching the preset/zero value
281
Integrated preset timecounter
3-digit or 5-digit display
Integrated pneumaticreset
Convenient buttonsetting
Hose coupler or rapid-fit connector
Continuously visiblepreset
60 x 75 x 12252 x 523-digit 4 mm5-digit 4 mm2-8 barFiltered (< 40 µm) oil-free
Adding
Seconds, minutes, depending on versionWith automatic reset; hose coupler M5, or rapid-fit connectorManual, pneumatic orautomatic
On reaching the preset value
286
Type Type 495, Integrated Type 495 Type 497 Type 497for surface-mounting
273Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Timers, Proximity Switches,Signal Indicators
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
Operating pressureAir
InputsStart input
Time range
Options
Reset
Output
Page
Integrated timer;optional for DIN-railmounting
DIN-dimensions Small mounting
dimensions No continuous air
supply required Stationary preset
value 0.2 to 300 seconds
24 x 48 x 6022.2 x 45Digit roll
2-6 barFiltered (<40 µm) oil-free
Timer is started as soonas input is pressurized
0.2-3 s; 2-30 s, 20-300 s;depending on versionHose coupler M5 orrapid-fit connector;DIN-rail mountingBy interrupting the air intakeAfter the set time haselapsed, input 1 isconnected to output 2
288
Integrated resetmodule for timers
Enables automatictimer sequences
DIN dimensions Small mounting
dimensions Stationary
preset Output signal
adjustable from 0.2 - 2 seconds
24 x 48 x 6022.2 x 45Digit roll
2-6 barFiltered (< 40 µm) Non-oiled; light oil mist is permissible
Time starts elapsing as soon as the input is pressurized0.2 - 2 s
Hose coupler M5, orrapid-fit connector
Interrupts the output forapprox. 300 ms after the set time value has elapsed
290
Non-contact actuation
Small mountingdimensions
Can be actuated bymagnetic field andiron (Fe)
No continuous airconsumption
18.2 x 40.3 x 19.6
2-6 barFiltered (< 40 µm) Non-oiled; light oil mist is permissible
Magnetic field and Feactuation
Actuating distance Fe: approx. 2 mmStrap retainer attachment
Upon actuation bymagnetic field or Fe
292
Signals the operatingstatus of pneumatichose connections
Easy to mount Connections/fittings
for 2 or 3 mm hoses(internal diameter)
Operating pressure 2-8 bar
No air consumption
30 x D9
Yellow signal indication(while being pressurized)2-8 barFiltered (< 40 µm) Non-oiled; light oil mist is permissible
Upon application ofpressure
As long as the hose is pressurizedFittings for hose diameters 2 or 3 mm(internal diameter)
293
Type Type 499 Timer Reset Module Proximity Switch Signal Indicator
Components 2001274 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Totalizing Counters
The pneumatic totalizing counter consists of a pneumatic actuator system and amechanical figure wheel system. The counter is actuated by pneumatic pulses gene-rated by switches, sensors, etc.
Compressed air pulses exert pressure on the piston of the actuator system via theconnection (hose coupler or rapid-fit coupling). The blade, loosely connected to the rocker, is actuated by the tappet. With each pulse,the rocker moves the ones drum by one half of a figure (one half-increment) andsimultaneously tensions a spring which moves the drum a further half-increment asthe pressure drops.
External resetting of totalizing, preset and differential counters is possible by meansof a reset module integrated in the counter.
If the counters are used in extremely soiled surroundings, we highly recommendoperating the counters in the specially designed protective covers.
The products shown in this catalogue are maintenance-free.
Versatile service-pressure counters in integration mounting and surface-mount con-struction are designed to count a wide range of processes which operate with pneu-matic pulses; the counters can be reset manually or pneumatically (external reset)before each new counting procedure.The counters are used as event, piece and batch counters, as integrators, for programstep display and more.
All dimensions, technical data and other specifications represent the standard ofproduction and knowledge attained when the material was printed. The functionalfeatures of the devices refer to the condition of the devices when new and undernormal operating conditions (+ 15 to + 25 °C, non- aggressive atmosphere and neutral operating media). The devices must be protected against freezing at tempe-ratures under + 5 °C.
FEATURES
FUNCTION
RESETTING
AMBIENT CONDITIONS
MAINTENANCE
USE OF COUNTERS
MODIFICATIONS
1 Figure wheel2 Rocker3 Blade4 Piston of the actuator system5 Connection
RT Button reset RP Pneumatic reset
3
4
1
2
5
Pneumatic Totalizing Counters
Totalizing counters (integration mounting and surface-mount versions) are availablewith either R 1/8", M5 or rapid-fit couplings.The corresponding type of connection is defined by the ordering code of the counterand need not be mentioned additionally when ordering.Commercially available fixtures can be used for R 1/8" and M 5 connections.Rapid-fit couplings are mounted in the counters. We recommend the use of Rilsanhoses (tubes) with 4 mm outside diameter.
All hoses are simply inserted into the rapid-fit couplings. Ensure that the hose is ins-erted far enough to allow the O-ring to seal properly. The hose is released by pres-sing (e.g. using a screw driver) the guide ring and pulling the hose at the same time.
Advantages of the rapid-fit couplingsHoses and tubes of 2.7 mm x 4 mm are simply inserted. This ensures quick installa-tion and minimum set-up costs.
CONNECTION OPTIONS
275Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Hose stop
O-ring
Pilot pin ofthe collet
Sleeve
Slit collet
Flexibleplastichosing
Pneumatic Totalizing Counter
6 or 8-digit display Manual/pneumatic reset or without reset Simple installation Screw connection hose coupler or rapid-fit connector Maintenance-free operation
TECHNICAL DATA Display 6 or 8-digit, depending on versionDigit height 4 mmService pressure 2 . . . 8 barAir quality non-oilyFilter pore width < 40 µm Operating temperature - 15 . . . + 60 °CStorage temperature - 40 . . . + 60 °CConnection hose coupler M5 or rapid-fit connector, depending on
versionMounting position anyVibrostability 50 m/s2 acc. to IEC 068 2-6Shock stability 400 m/s2 acc. to IEC 068 2-27Maintenance-free operation counting 30 x 106 pulses, reset 1.5 x 106 pulsesWeight approx. 60 gCount input addingPulse length min.. 8 msCounting frequency max. 25 Hz Pulse duty factor see glossary "counting frequency"Reset depending on version
6-digit counter– manual with button– pneumatic, min. pulse length 180 msATTENTION: minimum time period between last countpulse and pneumatic reset is 50 ms8-digit counter– without reset
Type 495
276 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R SComponents 2001
277Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONED DRAWINGS
Technical data
ORDER INFORMATION
Counter
Accessories
Connection 6-digit 8-digit
Hose coupler M5 0 495 464 –Rapid-fit connector 0 495 465 0 495 422
Protective cover IP 55 with knob 1 405 611with lock 1 405 612
Fittings for hose M5 x 1 3 641 733Connection kit M5/R 1/8" 1 495 089*
* on request
Dimensions in mm
Type 495
Components 2001278 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Totalizing Counter for Surface Mounting
6-digit display Manual/pneumatic reset or without reset Simple installation Screw connection hose coupler or rapid-fit connector Maintenance-free operation
TECHNICAL DATA Display 6-digitDigit height 4 mmService pressure 2 . . . 8 barAir quality non-oilyFilter pore width < 40 µmOperating temperature - 15 . . . + 60 °CStorage temperature - 40 . . . + 60 °CConnection hose coupler M5 or rapid-fit connector,
depending on versionMounting position anyVibrostability 50 m/s2 acc. to IEC 068 2-6Shock stability 400 m/s2 acc. to IEC 068 2-27Maintenance-free operation counting 30 x 106 pulses, reset 1.5 x 106 pulsesWeight approx. 60 gCount input addingPulse length min. 8 msCounting frequency max. 25 Hz Pulse duty factor see glossary "counting frequency"Reset depending on version
– manual with button– pneumatic, min. pulse length 180 msATTENTION: minimum time period between last count pulse and pneumatic reset is 50 ms– without reset
Type 495
279Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
ORDER INFORMATION
Counter
Accessories
Connection
Hose coupler M5 0 495 462Rapid-fit connector 0 495 461
Fittings for hose M5 x 1 3 641 733Connection kit M5/R 1/8" 1 495 089*
* on request
DIMENSIONED DRAWING
Dimensions in mm
Type 495
Components 2001280 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Preset Counters
FEATURES
FUNCTION
PNEUMATIC OUTPUT SIGNAL
SUBTRACTING PRESET COUNTER
ADDING PRESET COUNTER
PERMANENTLY VISIBLE PRESET VALUE
USE OF COUNTER
MAINTENANCE
MODIFICATIONS
The pneumatic preset counter consists of a pneumatic actuator system, a mechani-cal figure wheel and a pneumatic limit switch. The counter is actuated by pneuma-tic pulses generated by switches, sensors, etc.
Compressed air pulses exert pressure on the piston of the actuator system via theconnection (hose coupler or rapid-fit coupling). The blade, loosely connected to therocker, is actuated by the tappet. With each pulse, the rocker moves the ones drumby one half of a figure (one half-increment) and simultaneously tensions a springwhich moves the drum a further half-increment as the pressure drops.
When a set value is reached e. g. from zero, the actuating lever of the counter relea-ses the plunger of the pneumatic counter. The valve of the switch is reversed and theoutput is pressurized. When the counter is reset, whether manually, pneumaticallyor automatically by means of an accessory module, the plunger is pressed back intoinitial position by the mechanical actuating lever, blocking the output signal.
This counter subtracts pneumatic compressed-air pulses from a set value and relea-ses a pneumatic output signal when zero is reached.
This counter adds pneumatic compressed-air pulses starting from zero and releasesa pneumatic output signal when the preset value is reached. The value is preset bypressing the reset key and entering the preset value. The preset value remains visi-ble when the counter is reset.
The preset value is permanently visible; it can be read at any time. Because the coun-ting mode is adding in this case, the added sum can be assumed immediately with-out further calculation.This means that the number of pieces produced or elapsed time units can be read.In addition, the preset value can be reset without resetting to zero first and is thusalso possible during operation if necessary.
Preset counters for normal and regulating pressure can be used for a wide range ofapplications in pneumatic circuits and systems, the pilot and final signals acting ascontrol elements. The counters are used for metering, as digitally adjustable timers,for presetting quantity and number of pieces, and in conjunction with pneumaticlimit switches, air barriers, proximity switches, etc. The counters can be resetmanually, pneumatically through an external pulse, or automatically by means of anaccessory module.
The products shown in this catalogue are maintenance-free.
All dimensions, technical data and other specifications represent the standard of pro-duction and knowledge attained when the material was printed. The functional fea-tures of the devices refer to the condition of the devices when new and under nor-mal operating conditions (+ 15 to + 25 °C, non- aggressive atmosphere and neutraloperating media). The devices must be protected against freezing at temperatures under + 5 °C.
1 Figure wheel2 Rocker3 Blade4 Piston of the actuator system5 Hose coupler6 Hose coupler7 Valve8 Actuating lever
5 6
281Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Adding Pneumatic Preset Counter
Continuously visible preset Integrated pneumatic reset 3 or 5-digit display Convenient button setting
TECHNICAL DATA Display 3 or 5-digit indication of count and preset value, depending on version
Digit height 4 mmService pressure 2 ... 8 barAir quality oilfreeFilter pore width < 40 µmOperating temperature 0 ... + 60 °CConnection hose coupler M5 or rapid-fit connection
(depending on version)Mounting front panelMounting position horizontal roller axisProtection class (IEC 144) IP 40 with hoses connected; for higher degree or protection
we recommend clear coversCount input addingMin. pulse length 8 msMax. counting frequency 20 HzPulse duty factor 1:1Reset - manual with button
- by external pneumatic signal, Min. pulse length 180 ms- automatic reset after preset has been reached
(only in version with automatic reset)Reset frequency max. 1 per 2 sSignal duration from when preset has been reached until reset; at 3 bar,
counter with automatic reset 300 ... 340 ms
Attention! Minimum time period between last count pulse and pneumatic reset is 50 ms.
VARIABLE PILOT SIGNAL Using two pneumatic preset counters it is possible to implement pilot signals withvalues ranging from 1 to 99.999. These counters are especially suitable as control-ling elements for semi-automatic or fully automated processes. This applies both tovarying preset/setting values and to values which remain the same for a long period.
Type 497
Components 2001282 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
DIMENSIONED DRAWINGS
Dimensions in mm
Dimensions in mm
with automatic reset
Type 497
283Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
CONNECTION DIAGRAMS Circuit diagram
Pulse rate
Connection diagram
Variable pilot signalSuggested connection
Z Pulse input "count"Y Pulse input "reset"P Air inputAE Final output signalAV Output pilot signal
IG Pulse generatora Countb Resetc Mains
Connection: Rapid-fit connector
3 pulses/sPulse Duty Factor 1/10
20 pulses/swith non-pulse interval
Output pulse
Technical data Type 497
Button and pneum. with automaticreset reset
Connection 3-digit 5-digit 3-digit 5-digit
Hose coupler M5 0 497 619 0 497 486 0 497 493 0 497 472Rapid-fit connector 0 497 618 0 497 487 0 497 479 0 497 473
Transparent cover (description see ”Accessories“)with knob 1 405 613with lock 1 405 614
Fittings M5 for hose M 5 x 1 3 641 733Connection kit M5/R 1⁄8 " 1 495 089*
* on request
ORDER INFORMATIONCounter
Standard accessories
Components 2001284 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Subtracting Pneumatic Preset Counter
Integrated pneumatic reset 3 or 5-digit display Convenient button setting
Display 3 or 5-digit count indication, depending on versionDigit height 4 mmService pressure 2 ... 8 barAir quality oilfreeFilter pore width < 40 µmOperating temperature 0 ... +60 °CConnection hose coupler M5 or rapid-fit connection
(depending on version)Mounting front panelMounting position horizontal roller axisProtection class (IEC 144) IP 40 with hoses connected; for higher degree or protection
we recommend clear coversCount input subtractingMin. pulse length 8 msMax. counting frequency 20 HzPulse duty factor 1:1Reset - manual with button
- by external pneumatic signal, Min. pulse length 180 msReset frequency max. 1 per 2 sSignal duration from when preset has been reached until reset; at 6 bar,
counter with automatic reset 300 ... 340 ms (depending on connected volume and service pressure)
Attention! Minimum time period between last count pulse and pneumatic reset is 50 ms.
TECHNICAL DATA
DIMENSIONED DRAWING
Dimensions in mm
Type 497
285Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
Button and pneum. resetConnection 3-digit 5-digit
Hose coupler M5 0 497 530 0 497 550Rapid-fit connector 0 497 532 0 497 552
Transparent cover (description see "Accessories")with knob 1 405 613with lock 1 405 614
Fittings M5 for hose M 5 x 1 3 641 733Connection kit M5/R 1⁄8 " 1 495 089*
* on request
Order information
Counter
CONNECTION DIAGRAMS Circuit diagram
Pulse rate
Standard accessories
Pulse rate
Z Pulse input "count"Y Pulse input "reset"P Air inputAE Final output signalAV Output pilot signal
IG Pulse generatora Countb Resetc Mains
3 pulses/sPulse Duty Factor 1/10
20 pulses/swith non-pulse interval
Output pulse
Connection: Rapid-fit connector
Type 497
Components 2001286 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Preset Time Counter
Preset value continuously visible Integrated pneumatic reset 3 or 5-digit display Convenient button setting
FUNCTION DESCRIPTION The combination of a pneumatic minu-tes or seconds pulse generator and apneumatic preset counter allows settingof times from 1 to 99999 s or 1 to 99999min. Versions with automatic reset per-mit fully automatic timing sequences.
TECHNICAL DATA Display 3 or 5-digit indication of count and preset valueDigit height 4 mmService pressure 2 ... 6 barAir quality oilfreeFilter pore width < 40 µmOperating temperature 0 ... + 60 °CConnection hose coupler M5 or rapid-fit connectionMounting with front panelProtection class (IEC 144) IP 40 with hoses connected; for higher degree of
protection we recommend transparent coversWeight approx. 150 g, with automatic reset module approx. 200 gCount input addingResolution 0.01 h, minute or second, dep. on versionMax. counting frequency 20 HzTime deviation max. 15 % in the first second or minuteFrequency error 1/min. 0.5 %; 1/s 2 %Reset - manual with button
- by external pneumatic signal, min. pulse length 180 ms- automatic reset after preset has been reached(only in version with automatic reset)
Reset frequency max. 1 per 2 sSignal outputSignal duration from when preset has been reached until reset;
counter with automatic reset 300 ... 340 msSwitch A is ventilated with intake air during signal generationSignal generation transition P to A
1 = x-input2 = seconds timer3 = minutes timer
1
2
3
Type 497
287Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
DIMENSIONED DRAWING
ORDER INFORMATION
Preset time counter
Standard accessories
Version Hose Rapid fitcoupler M5 connection
3-digit, second indication 0 497 621 0 497 620 minute indication 0 497 622 0 497 623
5-digit, second indication 0 497 652 0 497 653 with automatic reset 0 497 665 0 497 663
5-digit, minute indication 0 497 654 0 497 655 with automatic reset 0 497 666 0 497 664
Transparent cover as described under "Accessories"with key 1 405 614with knob 1 405 613
Fittings M5 for hose M5 x 1 3 641 733Connection kit M5/R 1⁄8 " 1 495 089*
* on request
Dimensions in mm
CONNECTION DIAGRAM
Maße in mm
X = air intake timing element P = air intakeY = pneumatic reset A = output signal
pneumatic timer pneumatic timerwith automatic repeat mode
Type 497
Components 2001288 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Timer
Low-cost DIN dimensions Requires little space for installation Pressure-independent No continuous air supply equired Stationary preset value
TECHNICAL DATA Display digit rollTime range 0.2 ... 3 s, 2 ... 30 s or 20 ... 300 s, depending on versionOperating pressure 2 ... 6 barAir quality oilfreeFilter pore width < 40 µsOperating temperature 0 ... + 60 °CConnection hose coupler M5 or rapid-fit connection,
depending on versionMounting clamping spring or DIN rail attachmentProtection class (IEC 144) IP 40Weight approx. 50 gInput timer is started when input 1 is pressurizedTime setting continuous with rotary knobTiming range 0.2–3 s 2–30 s 20–300 sRepeating accuracy ± 0.1 s ± 0.3 s ± 3 sSetting accuracy ± 0.3 s ± 0.6 s ± 6 sReset by blocking air intake at input 1Reset time min. 200 msOutput after the set time has elapsed, input 1 is connected to output 2
CONNECTION DIAGRAM
Type 499
289Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
DIMENSIONED DRAWINGS
ORDER INFORMATION
Timer
Panel frame
Accessories
Time range Time range Time range
Connection 0.2 ... 3 s 2 … 30 s 20 … 300 s Hose coupler M5 0 499 520 0 499 500 0 499 550 Rapid-fit connection 0 499 521 0 499 501 0 499 551
Dimensions Installation dimensions Ordering code
48 x 48 mm 45 x 45 mm 2 405 219 52 x 52 mm 45 x 45 mm 2 405 220 54 x 29 mm 50 x 25 mm 2 405 218 59 mm 50 mm 2 405 224 60 x 75 mm 52 x 52 mm 1 499 512 72 x 72 mm 68 x 68 mm 1 405 672
Socket for DIN rail attachment– Hose screw coupler 1 499 511 – Rapid-fit connector 1 499 513
Please do not forget to add one of the following Bypass slides to your order:
– Bypass slide for 35 mm H-rail 3 513 306 – Bypass slide for C-rail 3 513 307
Automatic reset see automatic reset module
Type 499
Dimensions in mm
Components 2001290 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Automatic Reset Module for Pneumatic Timers
Output signal of adjustable length 0.2 to 2 seconds DIN dimensions Compact design Stationary preset value
TECHNICAL DATAPneumatic
Service pressure 2 ... 6 barBursting pressure 12 10 barNominal pressure 4 barAir quality filtered (40 µm), non-oiled compressed air,
light oil mist permissible
InputResponse pressure 1.2 ± 0.4 barDrop pressure 0.3 ± 0.2 barPulse length min. 30 msPause for reset min. 200 ms
Time rangesSwitching delay time adjustable from 0.2 – 2 sec.Signal interruption time min. 300 msRepeating accuracy ± 0.3 sbased on switching delay time
Temperature rangeApplication class (DIN 40040) KUG
K = lower temperature limit: –15 °CU = upper temperature limit: + 60 °CG = average relative humidity: 65 %without condensation
Storage temperature – 25 … + 70 °CProtection class (DIN 40050) IP 40
IP 54 (with protective cover)Substances which inhibitapplication of paint accordingto VW test specification no. 3.10.7 noneDimensions 24 x 48 x 68 mm (W x H x D)Insertion depth without connect. 57.5 mmFront panel cutout 22.2 +0.3 x 45 +0.6 mm (W x H)
(Other front panel cutout dimensions possible withadditional panel frame)
Mountingfor front panel insertion by means of clamping framesPneum. connections M5 or rapid-fit coupling for hoses with 4 mm
external diameterTightening torque for connections max. 250 NcmMounting position anyWeight approx. 50 g
Mechanical
291Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Automatic Reset Module
DIMENSIONED DRAWING
ORDER INFORMATION Ordering code
Pneum. reset module M5 0 499 350Pneum. reset module rapid-fit coupling 0 499 351
Front panel 54 x 29 mm 2 405 218
(For further accessories, please refer to the pneumatic timers)
CONNECTION DIAGRAM
t
2
A
1
t12
1
2
Reset module - timer
2
1
4,511,6
16 26,5 44
,6
21,8
10,4
M 5
48
24
7,8
602,5
3,9
1
22,2
45
+0,3
+ 0,6
54 +0,3
50+ 0
,6
Front panel cutout
Installation of the resetmodule in combinationwith a timer in a cutoutmeasuring 54 x 50 mm is possiblewith two front panels of54 x 29 mm (spacers).
for reset modules for combined installation withtimer
Dimensions in mm
Accessories
Components 2001292 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Proximity Switch
ORDER INFORMATION Ordering code
Pneumatic proximity switch 0 490 300Strap retainer attachment up to 100 mm ø 1 490 205
CONNECTION DIAGRAM
DIMENSIONED DRAWING
Non-contact actuation Miniature dimensions Can be actuated by magnetic field and iron No continuous air consumption
TECHNICAL DATA Service pressure 2 to 6 barAir quality oilfreeFilter pore width ≤ 40 µmOperating temperature - 10 °C ... + 60 °CConnection plug fitting for hose NW 3Nominal width 2 mmActuating distance for Fe: approx. 2 mmDistance switch - switch min. 20 mmDistance switch to steel parts min. 15 mmMounting thread M4 or strap retainerSensing non-contact (also through a wall of
non-magnetic material)
Switching with FeThe active area is marked by a whitedot. Three swit-ching directions arepossible (see dia-gram).
Indication
293Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pneumatic Signal Indicator
Signals the operating status of pneumatic hose connections Simple installation Connections for hoses with 2 or 3 mm inside diameter Service pressure 2...8 bar
DIMENSIONED DRAWING
Indication yellow signal as long as a line is pressurizedService pressure 2 ... 8 barAir quality filtered, light oil mist permissibleFilter pore width < 40 µmOperating temperature - 15 ... + 60 °CStorage temperature - 25 ... + 70 °CConnection hose with 2 or 3 mm inside diameter, dep. on versionMounting at connection hoseVibrostability 50 m/s2 (10 ... 500 Hz) acc. to IEC 068-2-6Shock stability 500 m/s2 (5 ms) acc. to IEC 068-2-27Maintenance-free operation > 30 million switching operationsWeight 2 g
ORDER INFORMATION Signal indicator for hoses with 2 mm inside diameter Ordering code 0 499 210Signal indicator for hoses with 3 mm inside diameter Ordering code 0 499 211
Dimensions in mm
TECHNICAL DATA
Notes
Components 2001294 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
295Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Position Indicators
Posi
tion
Indi
cato
rs
Typical applications:
Visual display at processingmachines
Tool machines Paper machines Saws Extruders Wood working machines Elevators
Lifting equipment Earth drilling equipment Cable laying equipment Lock control Crane systems Measurement techniques
Position indicators process the angle or path information that is pro-vided by appropriate pulse generators and thus enable positions to bedetermined.
Application: Machines with adjustable limit stops (machine tools, paper processingmachinery, saws, wood working machines etc.)
The diverse range offers the possibility of monitoring and protectinglimit stops as well sending positional data to control systems.
Components 2001296 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Position Indicators
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)Display
ProtectionSupply voltage
Temperature rangeInputsInpunt controlFrequencyCount Mode
Prescaling factorSet valueReset inputControl inputs
Output
Page
Small, compact,5 different versions
Voltage supply 12-24 VDC
8-digit LCD or 6-digit LED display
Optional with prescaling and decimal point function
48 x 24 x 6045 x 22.5LCD 8-digit, 7 mmLED 6-digit, 7.6 mmIP 6512-24 VDC
-10-50 °C
PNP/NPN2 kHzPhase discriminator(single)Optional 0.001-99.999
PNP/NPN
298
Position indicator withlarge dual-color, 8-digit LCD display; illuminated
Reproducible, freelyselectable set value
Programmable prescaling and decimal point functions
Voltage supply viaexchangeable Li cell
Small mounting depth Expandable by a
variety of optionalmodules
10 versions of thesame designoffering different functions
72 x 36 x 3668 x 33LCD 8-digit, 12 mmilluminatedIP 65Lithium battery, exchangeable0-50 °C
PNP/NPN10 kHz / 30 HzPhase discriminator(single)Optional 0.001-99.9999ProgrammableNPNKeylock
302
Large dual-colour, 5-digit LED display,digit height 18.5 mm
Programmable colourchange
Reproducible, freelyselectable set value
2 preset values Upgradable options:
RS 485, linear output Easy to service due to
modular system Complete functions by
8 counter versions and5 process indicators
96 x 48 x 10092 x 45LED 5-digit, 18.5 mmDual-colourIP 6622-55 VDC / 20-50 VACor 90-264 VAC0-55 °C
PNP/NPN10 kHz / 200 Hz / 20 HzPhase discriminator(single)0.0001-9.9999ProgrammableNPNKeylock
Optional with linear output; 1 or 2 relay and transistor outputs
305
Large 6-digit LED display, digit height14 mm
Voltage supply 12-24 VDC or 115/230 VAC
Plug-in screw terminal connections
Very high countingfrequency up to 40 kHz
Without, or with 2 limit values (as relayand transistor)
Indication of chainvalues or absolutevalues
Optional with RS 232or RS 485 interface
96 x 48 x 10892 x 45LED 6-digit, 14 mm
IP 5412-24 VDC; 24 VAC or100-240 VAC0-50 °C
PNP/NPN40 kHz / 30 HzPhase discriminator(single, dual, quadruple)0.0001-99.999ProgrammablePNP/NPNKeylock; display hold and reset enableWithout, or with 2 relayand transistor outputs
308
Type tico 731 tico 734 002 tico 735 signo 727
297Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Electronic Position Indicators
Features
Technical DataDimensions (mm)(Width x Height x Depth)Front panel cutout (mm)DisplayProtectionSupply voltage
Temperature rangeInputsInput controlBaud rateCounting mode
Prescaling factor
Set valueReset inputControl inputs
Output
Page
Large 6-digit LED display;digit height 14 mm
Voltage supply 12-24VDC or 115/230 VAC
SSI (SynchronousSerial Interface) inputfor absolute encoder
Freely scaleable display
Connections via plug-in screw terminals
Chain value or absolute value indication
Without, or with 2 limit values as relayand transistor
96 x 48 x 10892 x 45LED 6-digit, 14 mmIP 5412-24 VDC or115/230 VAC0-50 °C
SSI100 kHzSSI for single-turn and multiturn encoders up to 24 bitResolution programmable per revolutionProgrammablePNP/NPNKeylock and reset/display hold inputWithout, or with 2 relay and transistor outputs
315
Type signo 727 SSI
Components 2001298 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Flexible Counter Seriesin DIN size 24 x 48 mm
tico 731
high contrast 8-digit LCD display or brilliant 6-digit LED display different supply voltages available:
– independent of mains supply with lithium battery or– maintenance-free and
environmentally friendly with 12-24 V DC supply also high-voltage input 12-250 V AC/V DC up to 8 different functions for each standard model:
01 pulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh,hh)05 numerical display for the PLC (serial)06 bidirectional position indicator07 counter with differencial mode08 maintenance counter (on request)
OVERVIEW
Standard Models Type 1 Type 2 Type 3 Type 4 Type 5
HardwareDisplay 8-digit LCD 8-digit LCD 8-digit LCD 8-digit LCD 6-digit LEDSupply voltage Lithium battery 12 – 24 VDC Lithium battery 12 – 24 VDC 12 – 24 VDCNominal data 7 years NV-FRAM 7 years NV-FRAM NV-FRAMretention > 10 years > 10 years > 10 yearsActive edge x x x x xnegative or positiveedge programmableAmplitude thresholds < 0.7 and < 0.7 and < 3 V and < 0.7 and < 0.7 and
> 5 V, max. 30 V DC > 5 V, max. 30 V DC > 12 V > 5 V, max. 30 V DC > 5 V, max. 30 V DCmax. 250 V DC/AC
Counting frequency max. 7.5 kHz or max. 7.5 kHz or 20 Hz max. 7.5 kHz or max. 7.5 kHz orprogrammable 30 Hz attenuated 30 Hz attenuated 30 Hz attenuated 30 Hz attenuatedControl inputs Reset and Keylock Reset Reset and Keylock Reset and Reset and
application input application inputKeylock external input programmable external input programmable programmableMounting depth 32 mm 32 mm 60 mm 60 mm 60 mm
SoftwareImpulse counter x x x x xTachometer 1/min x x x xTime counter h : 1/100 h x x x x xTime counter h : min : s x x x x xNumerical display for PLC x x xPosition indicator x xbi directionalCounter with differencial mode xMaintenance counter (on request) x
299Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 731
TYPE 4 LCD display 12-24 V DC supply voltage COUNT: count input for voltage
signal (positive, 2 kHz)
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 8-digit LCD, 7 mmSupply voltage Ub 12 … 24 V DCCcurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 yearsCount input:Amplitude thresholds voltage input up to 2 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge positive edgeCounting frequency with position indicator 2 kHz: active edge positiveControl inputs:Reset – manual reset via keyboard (can be locked)
– external reset with static behaviour, 30 Hz attenuatedsame edge as with count input
Input 2: second count channel; same edge as with count inputReset lock programmable via front keyCounting frequency max. 2 kHz
INPUT 2: second count input forposition indicator
RESET: reset input Long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
Model tico 731
0 731 4 0 6Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mm
Clamping frame
Connecting terminal
tico 731
Components 2001300 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
TYPE 5 LED display 12-24 V DC supply voltage COUNT: count input for voltage
signal (positive, 2 kHz)
TECHNICAL DATA Operating temperature -10 ... 50 °CStrorage temperature -20 ... +60 °CElectrical connection screw terminalsMounting with clamping frameFront panel cutout 45 + 0.6 x 22 + 0.3 mmProtection class (IEC 144) front side IP 65, terminals IP 20Dynamic strength 10 m/s2 (10 ... 150 Hz) according to IEC 68-T2-6Shock stability 100 m/s2 (18 ms) according to IEC 68-T2-27General rating according to EN 61010, protective system IIPulse shape any square wave (1:1 for max. frequency)Input resistance < 50 kOhm (static)Min. pulse length 17 ms (30 Hz), 70 µs (7.5 kHz)Display 6-digit LED, 7 mmSupply voltage Ub 12 … 24 V DCCurrent consumption DC 12 … 24 V DC < 50 mANominal data retention nonvolatile memory > 10 yearsCount input:Amplitude thresholds voltage input up to 2 kHz:
< 0.7 V and > 5 V, max. 30 V DCActive edge positive edgeCounting frequency with position indicator 2 kHzControl inputs:Reset – manual reset via keyboard (can be locked)
– external reset with static behaviour, attenuatedsame edge as count input
Input 2: second count channel, same edge as count inputReset lock programmable via front keyCounting frequency max. 2 kHz
INPUT 2: second count input forposition indicator
RESET: reset input Long case
ORDER NUMBER
DIMENSIONSCONNECTION DIAGRAM
Model tico 731
0 731 5 0 6 Software function01 impulse counter02 tachometer (1/min)03 time counter (hhhh:mm:ss)04 time counter (hhhhhh.hh)05 numerical display for PLC06 bidirectional position indicator07 counter with differential mode (1 kHz)
Terminal assignment:
Inpu
t 2
Tr. o
ut
12-2
4 VD
C0
V
Coun
t Re
set
tico 731
Dimensions in mm Clamping frame
Connecting terminal
301Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Special functions tico 731
SPECIAL FUNCTIONS
ORDER NUMBERSPECIAL VERSIONS
To best match your application, you can order special functions such as prescalervalue, decimal point and preset value, which are permanently set by us before deli-very. With the variable prescaler value you can adapt to already existing transferratios of your application. Small resolutions can be shown with the decimal point,e. g. for the position indicator or the tachometer. A special feature is the possibility of displaying an information text in the display,e. g. for the surveillance of maintenance cycles. In this case the desired informationis shown in the display after reaching the fixed preset value. You can display any textthat can be created with the 7-segment alphabet, e. g. STOP, HELP, FILTER etc.
ORDER NUMBERSPECIAL VERSIONS
Special functions Impulse Tacho- Time Numerical Position Counter withfor counter meter counter display indicator differential work
Preset value x x x x0.001 bis 99.999Decimal point x x x x0 to 3 positionsbehind the commaPreset value x x0 to 99 999 999Information text x x(on reaching thepreset value)LCD = 8 charactersLED = 6 characters
1) not available for standard type 3
2) not available forstandard types 1, 2, 3
3) only available forstandard type 5
Model tico 731
0 731 7
Standard version:1 Standard model 12 Standard model 23 Standard model 34 Standard model 45 Standard model 5
Function:1 Impulse counter2 Tachometer (1/min)1)
3 Time counter (hhhh:mm:ss)4 Time counter (hhhhhh.hh)6 Position indicator (2-channel)2)
7 Counter with differential mode3)
4) not available for time counters5) not available for tachometers
and position indicator
P: (Value);
D: (Value);V: (Value);T: (Text);
Choose version and basic function:
Please state the desired special version on your order:
Prescaler value: 0.001 to 99.9994)
Decimal point: 0 to 3 positions after the comma4)
Preset value: 0 to 99 999 9995)
The information text displayed on reaching the preset value can be built up as required from the 7-segment alphabet
S* Option: with plug-in
screw terminals only for standard model 1, 2*
Components 2001302 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Flexible Counter Seriesin DIN size 36 x 72 mm
tico 734
4 Remote reset, NPN3 Input A, 30 Hz, NPN2 Input A, 10 kHz, PNP1 0V, Common5 Program enable6 Input B, 30 Hz, PNP7 Input B, 10 kHz, PNP8 DC-supply for backlighting
Suitable option modules: 1 734 0.. 10, 12, 14, 17, 19
Position Indicator (0 734 002)8 digit, prescaler 0.0001 to 99.9999,decimal point, reset value range
LCD, 8 digits, 12 mm height, excellent contrast through supertwist technology Backlighting with a 10-28 VDC supply Lithium battery power supply Decimal point, input scaling, count direction, output mode, etc. programmable,
depending on model Magnetic pick-up input enables a rate measurement system not requiring
external power Programming reduced to a minimum for easy handling and set-up CE approval, IP 65, NEMA 4
MODEL OVERVIEW The family tico 734 consists of ten models:
0 734 000 Totalizer without scaling0 734 001 Add/Subtract totalizer0 734 002 Position indicator0 734 003 Tachometer0 734 004 Programmable rate meter0 734 005 Rate meter with totalizer0 734 006 Time counter0 734 007 Preset counter0 734 008 Time preset counter0 734 009 Rate meter 005; with total and pulsed output
303Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data tico 734
Internal Single or dual lithium 3 V battery (CR 1/2 AA), typical lifetime of 5 years (10 yrs w/2 batteries). „Lo BAT“ display flashes approximately 2 weeks prior to end of battery life.
via Option Module 120/240 VAC provides 12 VDC for display backlighting Display LCD, 12 mm height, 8 digits Backlighting Whole display area can be backlit with a 10-28 VDC supply,
green-yellow colourHigh Speed Input (2) PNP, ≤ 28 VDC, max. 10 kHz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impulse > 45 µs, impedance 1 MΩLow Speed Input (3) NPN, ≤ 28 VDC, max. 30 Hz (50 % duty cycle), Low < 1.0 V,
High > 2.0 V, impedance 1 MΩHigh Voltage Option 100..260 VAC/DC, 30 Hz, 1 MΩ, with internal Module connection to input (3)Low Voltage Option 5..30 VAC/DC, 30 Hz, 17 kOhm, with internal connection Module to input (3)Enable Input (5) NPN, 28 VDC, level sensitiveReset Input (4) NPN, 28 VDC, edge triggered, max. 30 Hz (50 % duty cycle)Mounting Front panel mounting with mounting bracketDimensions DIN 36 x 72 mm, 36 mm total depth, total width 83 mmPanel Cutout 33+0,3 mm x 68+0,3 mm, depth behind panel < 29 mmPanel Thickness max. 8 mmFront Panel Rating IP 65 / NEMA 4Operating and Storage 0 °C to + 55 °CTemperature - 20 °C to + 60 °CGeneral DIN EN 61010 part 1 / VDE 0411 part 1
Protection according to class II, Contamination level 2 Overvoltage category II
Control Inputs
Physical
Environmental
Count Inputs
Display
Power Supply
DIMENSIONS
A: gasket, B: mounting bracketincl. option modul
Dimensions in mm
1) Panel cutout: 33 x 68 mm2) Panel thickness: max 8 mm
tico 734
Components 2001304 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
FUNCTIONS OVERVIEW
Power 115 VAC or 230 VAC (see wiring), frequency 50/60 Hz. Terminal (8) provides Supply (E-H) an unregulated 10-20 VDC supply for powering sensors up to 50 mARelay Type: SPDT (Form C) mechanical relay; Operate Time: 6 msOutput 5A, 120/240 VAC or 30 VDC, silver alloy(A-B-J) Electrical Life: > 500 000 operations, Mechanical Life: > 10 million operationsHigh Voltage Range: 100 to 260 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 200 kOhmLow Voltage Range: 5 to 30 VAC or VDCVoltage Count Speed: max. 30 Hz. (duty cycle 50 %)Input (C-D) Minimum Pulse Width: 12 ms; Impedance: 127 kOhmMounting Attaching on back of instrumentDimensions 42 x 69 mm, depth 58 mm, total depth behind panel with instrument 82 mmTemperature Operating: -0° C to +50° C; Storage -40° C to +90° C;General DIN EN 61010 part 1, Protection according to class II
Contamination level 2; Overvoltage category II
OPTION MODULES
With the Option Modules, the tico 734 can be functionally extended and adaptedto special application conditions. The following option functions are available: AC power supply providing sensor supply 10-20 VDC / 50 mA and 12 V supply
for display backlighting (supports the battery in models with SSR output) Relay output, changeover contact, 5 A, 120/240 VAC or 30 VDC High voltage input (100..260 VAC/DC, max. 30 Hz, 200 KΩ)
Connections 010 011 012 013 014 015 016 017 018 019 020
High Voltage Input C-D x x x xRelay 1 x change over A-B-J x x x x x x AC power Supply E-F, G-H x x x x x xLow Voltage Input C-D x x x x
1734 …
TECHNICAL DATA
WIRING
ORDERING INFORMATION Panel Instruments
Totalizer 0 734 000Add/Subtract Totalizer 0 734 001Position Indicator 0 734 002Tachometer 0 734 003Programmable Rate Meter 0 734 004Rate Meter with Totalizer 0 734 005Elapsed Time Indicator 0 734 006Preset Counter 0 734 007Preset Timer 0 734 008Rate Meter with Total 0 734 009and Pulsed OutputLithiumbattery E3533 355
Option Modules
HV Input 1 734 010Relay 1 734 011AC Power 1 734 012HV Input and Relay 1 734 013HV Input and Power 1 734 014Power and Relay 1 734 015HV Input/Power/Relay 1 734 016LV Input 1 734 017LV Input and Relay 1 734 018LV Input and Power 1 734 019LV Input/Power/Relay 1 734 020
All modules contain 17 terminals. Theexact functions that are present aredetermined by the model of instrumentand option module (see Functions Over-view).1-8 Connection to instrument
(refer to appropriate operatinginstructions)
A Normally Open Relay ContactB Relay CommonJ Normally Closed Relay
ContactC-D High or Low Voltage Input, no
polarity, (provides NPN signal on terminal 3)
E-F 115 VAC Line winding IG-H 115 VAC Line winding II
Flexible Counter Series, Dual Colour Display in DIN size 48 x 96 mm
tico 735
305Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
POSITION INDICATOR Input Modes, Features Value Range
Quad -19999...99999Upper and Lower Range Limits -19999...99999Set Value -19999...99999Option: Linear Output, scalable, isolated 0/4-20 mA, 0/1-5 V, 0/2-10 V
COUNTING - MEASURING - INDICATING - MONITORING - TRANSMITTING
Because of the unlimited number of measurements it can handle, the tico 735 devicefamily is equally well suited to applications in the world of impulse and time coun-ting as to those in the processing area.If you are looking for display clarity and high levels of accuracy, then the tico 735is the right choice for you. The dual-colour display is unique, highlighting an alarmsituation or an excess value at a single glance. You can programs your own choiceof display colour to indicate normal or alarm conditions.
FEATURES Brilliant 18.5 mm high dual-colour red/green LED display with programmablecolour settings
As standard, all models have limit or preset values Scaling available as standard Universal Power Supply 90...264 V AC or 20...50 V AC/DC Simple structured operation with switchable help function
External Program Lockout DIN housing 48 x 96 mm, mounting depth < 100 mm Conveniently sized Screw Terminals Large keys offer safety and ease of operation
NPN and Relay Outputs Option: RS 485 ASCII protocol serial interface for all versions. ”Remote Display”
version receives process values over RS 485
tico 735 Technical data
Components 2001306 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONS10096
48
tico 735
PGM RST
Dimensions in mm
DISPLAY AND KEYBOARD
PHYSICAL
OPERATING CONDITIONS
APPROVALS
OPTION LINEAR OUTPUT
OPTION RS 485
Primary Display Red/Green, 7 segment LED, 5 digits, height 18.5 mmSecondary Display single digit 7 segment LED, height 7 mm, red/greenOutput Indicators 2 red LEDs for OUT 1 and OUT 2 statusKeyboard 4 rubber keys for programming and manual reset
Front Dimensions DIN 48 mm x 96 mm, 110 mm total depthMounting Front panel mounting (mounting bracket supplied)Panel Cutout 45 mm x 92 mm, panel thickness max 12 mmConstruction Front carrier with PCBs can be pulled outTerminals Screw Type (combination head)
Power Supply 90 - 264 V AC 50/60 Hz (electrically separated from all inputs and outputs) or 20...50 V AC / 22...55 V DC
Temperature Operation: 0 °C to +55 °C (32 °F to 131 °F)Storage: -20 °C to +60 °C (-4 °F to 176 °F)
Relative Humidity 0 to 90 %, non-condensing
Protection class Frontpanel IP 66CE EN 50082-1/92-95; EN 50081-1/92, -2/94Safety DIN EN 61010 part 1; protection according to class IIGeneral UL, CUL, Overvoltage cat. II, Contamination level 2
Insulation optically isolated, 250 V AC or 400 V DC from all inputs and outputs
Output Ranges 0-20 mA, 4-20 mA, 0-10 V, 2-10 V, 0-5 V, 1-5 VAccuracy ± 0.25 % (mA on 250 Ohms, V at 2 kOhm);
Deviation ± 0.5 %Resolution 8 bits after 250 ms (10 bits after 1000 ms typically)Updates approx. 4 per secondLoad mA: max 500 Ohm, V: min. 500 Ohm
Type RS 485, serial asynchronous, Open ASCII, Master-Slave, up to 99 zones
Parameters 9600...1200 Bd, 1 start, 7 data, 1 stop, even parity
Technical data tico 735
307Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
ORDERING DATA
129 8 7 6 5 4 3
10
11
12
13 14 15 16 17 18 19 20 21
22
23
24
RS 485B A + 0V Relay OUT1
LinearOutput
+
-
0V
OU
T1N
PN
CTRL
1
CTRL
2
Aux.
Pow
er
0V
Inpu
t A
Inpu
t B
OU
T2N
PN
NC
RelayOUT2
NC
~ ~90-264 VAC
22-50 VDC/ACor
TERMINALS
SPECIAL FEATURES
CONTROL INPUTS
COUNT INPUTS Active Edge NPN or PNP programmable; capable of TTL; 30 V DC maxwith PNP High ≥ 3.0 V, Low < 2.0 V or open; 10 kOhm to 0 Vwith NPN High ≥ 3.0 V or open, Low < 2.0 V; 4.7 kOhm to V+Frequency 20 Hz, 200 Hz or 10 kHz programmable
CTRL1 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+ (Reset or hold) edge sensitive; 25 ms min., max 30 V DCCTRL 2 NPN; High ≥ 3.0 V or open, Low < 2.0 V; 4,7 kOhm to V+(Progr. security)) level sensitive; 25 ms min.; max 30 V DC
OUT 1 NPN NPN, open collector; 30 V DC max; 100 mA maxOUT 2 NPN response time < 75 µsRelay 1, Changeover (Form C); 240 V AC / 3A or 110 V AC / 5 A; pull-in Relays 2 (opt.) time 8 msAuxiliary 9...15 (unregulated V DC), 125 mA max; residual ripple < 0.5 VPower Supply
Display colour programmable Preset Lockout and Reset Disable programmable Program Security via CTRL 2 Optional Linear Output Scaling available as standard
0 7 3 5 P
Type 0735 P
Function1 Totalizer2 Position Indicator4 Tacho/Rate Meter5 Rate + Totalizer6 Time Counter7 1 Preset Counter8 2 Preset Counter9 Batch Counter
Power Supply0 90…264 V AC2 20…50 V AC or
22…55 V DC
Output Relay 20 none1 with Relay 2
nicht für Funktion1, 6, 7
Interface0 none5 with RS 485
Linear Output0 none3 with 4-20 mA
(only with function 2, 4, 5)
Option module Ordering codeRelay 2 1 901 001Linear output 1 901 003RS 485 interface 1 901 004
OUTPUTS
Components 2001308 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 727.1 Position Indicator with/without Limit Values
Large, 6-digit, 14 mm high LED display Prescaler 2 variable limit values Easy direct selection by 2 function keys Relay output with two change-over contacts Connection by plug-in screw terminals Chain value or absolute value indication Small compact design in DIN dimensions 48 x 96 mm Electronic value retention, non polluting – no battery NPN/PNP programming of inputs Optional with RS 232/RS 485 interface
APPLICATION FIELDS Indication of infeed values, lengths, support- or machine positions, totalizing valuesetc.The coupling to the machine may be effected e. g. with an incremental shaft enco-der from the wide and comprehensive Hengstler program of types RI 30 to RI 58.
6-digit LED display with 14 mm high digits, easy to read, decimal point can be programmed
DISPLAY
Bereich ABereich BP2
PSC
SET
P1
CHAIN
signo 727 HENGSTLERSection B Section A
Section A: shows the actual count value when in counting mode, and the chan-geable parameters when in programming mode.
Section B: LED indicators showing the active output signal, and in programmingmode indicating the changeable parameter.
PROGRAMMING
Operation level 1 Operation level 2 Operation level 3
P 1: Limitvalue 1
P 2: Limitvalue 2
PSC: Prescaler System-parameters
-,-,-,- Decimal point
SET: setvalue
Direct access withfunction keys F1 and F 2
Programming of signo 727 is possible by direct access and in the 3 operation levels.Direct access: Limit value 1, Limit value 2 are set with the function keys
F1, F2Operation level 1: Set valueOperation level 2: Includes prescaler and decimal pointOperation level 3: Includes system parameters, which are normally pro-
grammed during start-up procedure only.
Unauthorized programming of the signo 727 is prevented by a control input, whichcan lock the operation levels.
309Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data signo 727.1
Display 7-segment LED, 6 digits, suppression of leadingzeros, programmable decimal point
Digit Height 14 mm Power Supply Voltage Ub 12 … 24 VDC or 115/230 VAC, depending on versionsCurrent Consumption 12 … 24 VDC < 250 mA,
115/230 VAC < 60 mASensor Supply AC operation: 12 … 24 VDC,
DC operation: Ub – 2 V, Imax. = 60 mA
Data Retention non-volatile memory > 10 yearsOperating Temperature 0 … 50 °C Storage Temperature –20 … +70 °C Electrical Connection plug-in terminalsMounting with clamping frameProtection Class (IEC 144) front side IP 54, terminals IP 20Noise Immunity EMC severity according to IEC 801, part 2 + part 4Vibrostability 10 m/s2 (10 … 150 Hz) according to IEC 68-part 2–6Shock Stability 100 m/s2 (18 ms) according to IEC 68-part 2–27General Rating according to VDE 0411, DIN 57411, protection class II
Inputs: Switching Level <2 V and >8 V, max. 40 VDC Active Edge positive when pnp input
negative when npn inputPulse Shape any (square 1:1 at max. frequency)Input Resistance approx. 5 kΩ (static)Count Input with prescaler programmable 0.0005 bis 99.9999
– as phase discriminator input with single, double or quadruple evaluation
– as differential input– as up/down input
Pulse Duration 12,5 µs (40 kHz), 17 ms (30 Hz) Count Frequency max. 40 kHz or 30 Hz
Control Input: Application Input 1 static, pulse duration > 3 msDisplay-Hold or Reset-enable, (programmable)Application Input 2 (Reset functions)Reset and/or Chain- pulse duration > 3 ms or > 17 ms Reset, (programmable)Gate static, pulse duration > 12 µs / > 17 msKeylock static, pulse duration > 3 ms
Outputs:Relay* Out 1 and Out 2Contact Type changeover relaySwitching Voltage max. 250 VAC / 30 VDC, min. 5 VAC/DCSwitching Current max. 1A, min. 10 mATransistor* Out 1 and Out 2, PNP, 10 mA
* for versions with limit value only
TECHNICAL DATA
Components 2001310 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical datasigno 727.1
(here with Limit values)
DIMENSIONAL DRAWING
dimensionsin mm
plug-interminals clamping frame
CONNECTION DIAGRAM
ORDER INFORMATION Type Supply Ordering code
signo 727 without limit values 12 … 24 VDC 0 727 101signo 727 without limit values 115/230 VAC 0 727 102signo 727 with 2 limit values 12 … 24 VDC 0 727 121signo 727 with 2 limit values 115/230 VAC 0 727 122
This counter is available with several interfaces. See next pages.
311Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Variable Preset Counter and Position Indicator with Interface RS 485 / RS 232
signo 723signo 727
TECHNICAL DATA
Large 6 digit LED display, 14 mm
Up-/down counter, 6 digits, with different count modes and prescaler
2 preset values or 2 limit values
Transistor outputs (PNP) and relay outputs (changeover contacts)
Compact DIN 48 x 96 mm
Easy manual operation with function keys
Interface: RS 485 or RS 232
Protocol
RS 485
Power Supply Voltage 12...24 VDC or 115/230 VACSensor Supply AC-operation: 12...24 VDC, DC-operation: Vop-2V, Imax. = 60 mA
Inputs:Switching Level < 2 V and > 8 V, max. 40 VDCActive Edge positive PNP or negative NPN programmableCount Input with prescaler programmable 0.0005 ... 99.9999
- as phase discriminator input with single, double or quadruple evaluation
- as differential input- as up/down input
Count Frequency max. 40 kHz or 30 HzControl Inputs Reset, Gate, Hold and Keylock
Outputs:Relay Out 1 and Out 2 with changeover contact, 1 A, 250 VAC/30 VDCTransistor Out 1 and Out 2 with PNP-Output, 10 mAmaximum length 15 m
Input R x Dtypical input resistance 5 kOhmmax input voltage 30 V
Input T x Doutput voltage 8 Voutput current max. 20 mA
Terminals A and Btypical input resistance 12 kOhmmax input voltage – 7 .. + 12 Voutput level High: 3.5 V, Low: 1.3 Voutput current max. 60 mAmaximum bus length 2000 mdata transfer rate 1200, 2400, 4800 Bauddata format 7 bits, even parity
8 bits, no paritystop bits 1protocol Hengstler TP3 or ASCII (depending on version)
RS 232
For further technical information please refer to the pages describing signo 723.1 and signo727.1
Components 2001312 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 723signo 727
Technical data
DIMENSIONS
CONNECTION DIAGRAM
PRINTER PROTOCOL FOR 723.1
PRINT MASKS
Protocol Standard ASCII Baudrate 1200, 2400, 4800 BaudData format 7 Bits, even Parity, 1 Stop bit
8 Bits, no Parity, 1 Stop bitLine and Form Feeds programmable before and after printoutCutter Control programmable
The counter allows for the programming of 5 different print masksMask 0 only Count ValueMask 1 Counters: <value> Mask 2 Counter: <value>Mask 3 Counter: <value>
Preset1: <value>Preset2: <value>Set: <value>Prescaler: <value>
Mask 5 Length: <value> m
(here with interface RS 485)
9648
socket connectorsclamping frame
dimensions in mm
108
panel cutout: 45 x 92
313Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data signo 723signo 727
Remote Terminal ConverterRTCThe RTC is needed if more than one counter is to be connected to the PC or if thedistance between the machine and the PC is longer than 15 m. up to 31 counters can be connected to the RTC via RS 485 bus Connection RTC - PC is a standard RS 232 optimally tuned for operation with the Hengstler Software HTS (Hengstler Ter-
minal Server) Power supply 12..24 VDC or 12..18 VAC, max. 2 VA (plug-in power supply avai-
lable as accessory)
DIMENSIONS width 115 mm / height 38 mm / depth 165 mm
CONNECTION DIAGRAMS Connector ST 1
pin signal1 AC/DC2 Earth3 AC/DC
Connector ST 3
pin signal1.3 RS 485 A +2.4 RS 485 B -5 Earth
Connector ST 2
pin signal description1 DCD Carrier Detect2 RXD Receive Data3 TXD Transmit Data4 DTR Data Terminal Ready5 GND Signal Ground6 DSR Data Set Ready7 RTS Request To Send8 CTS Clear To Send9 RI Ring Indicator
ORDER INFORMATION
Counter
Counter with time counter
PC-driversoftware forTP3 Protocol
RTC ConverterRS 485 / RS 232
Version with interface 12...24 VDC 115/230 VACsigno 723 Printersoftware RS232 0 723 150M1 0 723 151M1signo 723 TP3 Protocol RS232 0 723 150M3 0 723 151M3
RS485 0 723 160M3 0 723 161M3signo 727 TP3 Protocol RS232 0 727 150M3 0 727 151M3
RS485 0 727 160M3 0 727 161M3
signo 723 TP3 Protocol RS485 0 723 125 0 723 126
Windows 3.X 0 723 165Windows 95 / NT 0 723 167DOS (ab 3.2) vt3com.exe 0 723 166TP3.com 0 723 168
RTC 0 723 169Plug-in power supply for RTC 3 560 032Connection cable RTC-PC (RS 232), 5 m 1 723 055
Components 2001314 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
signo 723signo 727
Windows Software HTS for Counters
‘ Logical counter adressConst CounterAddress = 25‘ registers of a counterConst CounterValue = 0Const Preset1 = 1Const Preset2 = 2Const Chain = 3
‘ read counter and insert result in table 1Sub Read_Counter()
Set Hts = GetObject(Class:=“Hengstler.TerminalServer.10“)Result = Hts.ReadRegister(CounterAddress; CounterValue)Sheets(„Table1“).Cells(6; 2).Value= Result
Ende Sub
Sub Write_Counter()Data = Sheets(„Table1“).Cells(2; 2).ValueSet Hts = HoleObject(Class:=“Hengstler.TerminalServer.10“)Result = Hts.WriteRegister(CounterAddress; CounterValue; Data)
Ende Sub
EXAMPLE
EXAMPLE
Reading and writing a counter from within MS Excel:
Guided Setup A program group and start icon are created automatically Setup registers the OLE attributes of HTS in the Windows registry DDE- and OLE Server
The driver can be called in several ways: Command line (DOS prompt) within a batch file from within an application, e.g. via system() function call Automatic handling of several counter registers by means of a job file.
Example of a driver call (uploading preset value 2): literal value: vt3com.exe 25 dw I002 #89462value out of a file: vt3com.exe 25 dw I002 value.dat
Connection to DOS Hengstler TerminalDriver vt3com.exe
Position Indicator for Absolute Encoder Connection
signo 727 SSI
315Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
large, 6-digit, 14 mm high LED display predetermined offset 2 variable limit values easy direct selection by 2 function keys relay outputs with change-over contacts chain value or absolute value indication npn/pnp programming of inputs synchronous/serial Interface
Indication of infeed values, lengths, support- or machine positions, totalizing valuesetc.The coupling to the machine may be done with an absolute encoder with SSI-Inter-face from the wide and comprehensive Hengstler program of types RA 58.
APPLICATION FIELDS
DISPLAY
Section ASection BP2
DATA
SET
P1
CHAIN
signo 727 SSI HENGSTLER
Section A: shows the actual count value when in counting mode, and the chan-geable parameters when in programming mode.
Section B: LED indicators showing the active output signal, and in programmingmode indicating the changeable parameter.
PROGRAMMING
Direct access withfunction keys F1 and F2
Operating level 1 Operating level 2 Operating level 3
P1:limit value 1
P2:limit value 2
SET: setvalue absoluteinformationsof the encoder
system-parameters
Programming of signo 727 is possible by direct access and in the 3 operating levelsDirect access: Limit values are set with the function keys F1, F2Operating level 1: Set valueOperating level 2: Includes absolute informations of the encoderOperating level 3: Includes system parameters, which are normally programmed
during start-up procedure only.Unauthorized programming of the signo 727 is prevented by a control input, whichcan lock the operating levels.
467803186786
3267103
10–30 VDC 0 V
DATA +DATA –Clock +Clock –
10–24 VDC 0 VDATA +DATA –Clock +Clock –
RA 58singleturnmultiturnmultiturn programmable
Encodercountersigno 727 SSI
727.11 0 Power0 Power
signo 727 SSI Technical data
Display LED, indication value/preselection 6 digits, suppression ofleading zeros, programmable decimal point, minus sign
Digit Height 14 mmPower Supply Voltage Ub 12...24 VDC or 115/230 VAC, depending on versionCurrent Consumption 12...24 VDC < 250 mA,
115/230 VAC < 60 mASensor Supply AC operation 12...24 VDC, DC operation UB - 2 V, Imax .= 60 mAData Retention non-volatile memory > 10 yearsOperating Temperature 0...50 ° CStorage Temperature -20...+70° CElectrical Connection plug-in terminalsMounting with clamping frameProtection Class (IEC 144) front side IP 54, terminals IP 20Noise Immunity EMC severity 3 according to IEC 801, part 2 + part 4Vibrostability 10 m/s ≈ (10...150 Hz) according to IEC 68-part 2-6Shock Stability 100 m/s ≈ (18 ms) according to IEC 68-part 2-27General Rating according to VDE 0411, DIN 57411, protection class II
Inputs:SSI Data +SSI Data -Baud rate: ca. 100 kHz
Control Input:Application Input 1 staticDisplay hold, Reset or Chain Reset(programmable)Keylock static
Outputs:SSI Clock +SSI Clock -Relay* Out 1 and Out 2Contact Type changeover relaySwitching Voltage max. 250 VAC/30 VDC, mind 5 VAC/DCSwitching Current max. 1A, min. 10 mATransistor* Out 1 and Out 2, PNP, 10 mA
* for versions with limit value only
Components 2001316 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
TECHNICAL DATA
Technical data signo 727 SSI
317Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONAL DRAWING
CONNECTION DIAGRAM
ORDER INFORMATION Type absolute encoder Power Ordering codeconnection supply
signo 727 without limit values SSI 12...24 VDC 0 727 111signo 727 without limit values SSI 115/230 VAC 0 727 112signo 727 with 2 limit values SSI 12...24 VDC 0 727 131signo 727 with 2 limit values SSI 115/230 VAC 0 727 132
Do not use absolute encoder with cut Gray Excess Code (e. g. 360 or 720)Maximum Encoder resolution: 12 bits (Singleturn) and
24 bits (Multiturn 12 + 12 bits)
Spannrahmen
here version without limit values 115/220 V AC
here version wit limit values 12/24 V DC
Dimensions in mm
plug-in terminals
clamping frame
Notes
Components 2001318 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
319Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
Acce
ssor
ies
Typical applications:
Pulse scaler: Frequency divider Pulse shaper A scaler for slow PLC inputs Prescaler
Pulse amplifier: Level adapting, e.g. TTL to 24
VDC Amplifier for electro-mechani-
cal counters Modules, bezels and
protective housings As an extension of the 400
module system
Measuring wheels: Conversion of lengths to
rotations Positioning Cutting and length
registration
Stroke Levers: for mechanical stroke lever
counter applications
Our counter program is completed by a wide range of accessory modu-les.
These modules give you the chance to resolve issues which actually gobeyond just counting.
Components 2001320 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)ProgrammingProtectionSupply voltage
InputsInput controlFrequency/signal lengthScaling factorReset inputOutput
Accessories
Page
Programmable pulsescaling factor up to2047:1
NAMUR generatorinput
DIN-rail attachment PNP transistor output Can be used as pulse
shaper
22.6 x 68.5 x 48
Via DIP switchesIP 2010-30 VDC
PNP or NAMUR5 kHz / 30 HzUp to 2047:1PNPPNP transistor 0.2 ms - 2 s; djustable depending on version 100 mA
324
Programmable pulsescaling factor up to1000:1
NAMUR generatorinput
Plugs into and combines with modular system 400
Transistor outputPNP/NPN
Pulse frequency up to5 kHz
50 x 25 x 92.5
50 x 25Via jumpersIP 2024 VDC
PNP, optional: NAMUR5 kHz / 50 HzUp to 1000:1PNPPNP/NPN transistor programmable, 25 ms;400 mASocket (connection box),panel frame
326
PNP or NPN input PNP or NPN output For electromechanical
or electronic counters
For use as amplifier orlevel adapter
DIN-rail mounting
22.6 x 68.5 x 48
IP 5010-30 VDC
PNP/NPN1 MHz
PNP/NPN transistor
300 mA
328
100 % Continuous-duty module for elec-trical reset for presetcounters 446, 447,486, 487 and presettime counters 489;with electrical reset
Plugs into modularsystem 400
Integrated connectionbox
51 x 51 x 121 (with plugged-in counter)50 x 50
IP 0024 VDC; 24 VAC; 115 VAC or 230 VAC
Depending on version15 ms (minimum)
Changeover contact;250 msMax. 220 V
330
Type 651 Pulse Scaler 651 Pulse Scaler 654 Pulse Amplifier Contin.-Duty Module forDIN-rail Modular System Electrical Reset
321Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)ProtectionSupply voltage
InputsInput controlOutput
Page
Automatic reset forpreset counters446,447,486,487, andpreset time counter489, with electricalreset
Plugs into modularsystem 400
Integrated connection box
51 x 51 x 121 with plugged-in counter50 x 50IP 0024 VDC; 24 VAC; 115 VAC or 230 VAC
Depending on versionChangeover contact,max. 220 V, DC max. 1 per sAC max. 1 per 2 s
331
115 or 230 VAC powersupply
Compatible with elec-tronic preset counters711.4 and 781.4
Integrated connection box
51 x 51 x 121 with plugged-in counter50 x 50IP 00115 VAC or 230 VAC
24 VDC, max. 60 mA
332
Type Reset Module Power Supply Unit for Preset Counters for Type 711
Components 2001322 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
tico 007Accessories
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Front panel cutout (mm)
Protection class
Page
Integrated panelframe for modularsystem 400
Sizes 1-5 Combines with
components of themodular system
60 x 50 x 47 size 160 x 75 x 47 size 260 x 100 x 71 size 360 x 125 x 71 size 472 x 144 x 71 size 5
54 x 29.5 size 154 x 54 size 255 x 82 size 355 x 106 size 454 x 132 size 5
333
Adapter panel framesfor tico and signo DINcounters
To adapt to differentDIN sizes and cutoutdimensions
60 x 50 to 48 x 2472 x 72 to 48 x 4860 x 75 to 48 x 48
125 x 60 to 96 x 4860 x 75 to 2 pieces 48 x 2460 x 100 to 48 x 24 and48 x 48
55 x 29.2 size 168 x 68 DIN54 x 54 size 2106 x 55 size 454 x 54 size 255 x 82 size 3
335
Protective case withscrew-type terminals
Screw or clampmounting
Version with translucent cover isavailable
63 x 38 x 99 for size 163 x 63 x 99 for size 260 x 50 x 85 for size 160 x 75 x 75 for size 2
55 x 29.5 size 155 x 55 size 2
IP 52 with translucent cover
336
Sealing covers formodular system 400
Easy to install Protection class
IP 65/66
For 60 x 50 size 1and 60 x 75 size 2Front panels
IP 65/66
337
Type Panel Frame Adapter Panel Frame Protective Cases Sealing Covers
323Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Accessories
FurtherAccessories
Features
Technical DataDimensions (mm)(Width x Height x Depth)
Page
For DIN-rail mountingor attachment bymeans of screws
Case made of insulating material
Installation of coun-ters of the modularsystem 400 in protective case size 2
65 x 110 x 136
338
Different, practice-oriented circumferenceversions
Different shaft diameters
Surfaces adapted tothe material measured31.5-38 x 26.5 x 75
Depending on version
339
Different stroke levershapes
Adapted to individualfields of application
Compatible withmechanical strokecounters
Depending on version
342
Type Case 680 Measuring Wheels Stroke Levers Further Accessories
Components 2001324 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Pulse Scalerfor DIN Rail Attachment
Programmable pulse scaling factor up to 2047:1 NAMUR generator input PNP transistor output Max. pulse frequency 5 kHz 35 mm DIN rail attachment
The divisor is set in binary code by means of DIL switches. To obtain a divisor valueof 100, e.g. switches S7, S6, and S3 must be set (100 = 64 + 32 + 4).Programming the signal durationOrdering code 0 651 109: 0.2 ... 1 ms (jumper 2 open) or 20 ... 100 ms (jumper 2 closed) Ordering code 0 651 114: 1 ... 20 ms (jumper 2 open) or 100 ms ... 2s (jumper2 closed).
PROGRAMMING
Supply voltage Vop 10 ... 30 VDC ± 10 %Current consumption < 10 mAOperating temperature - 10 ... + 60 °CStorage temperature - 20 ... + 70 °CElectrical connection screw terminalsMounting 35 mm DIN rail attachmentProtection class (IEC 144) IP 50, connections IP 00Vibrostability 50 m/s2 acc. to IEC 068-2-6General design acc. to DIN VDE 0411
InputsAmplitude thresholds < 2 V and > 8 V or NAMURActive edge positive or NAMURPulse shape random (squarewave 1:1 for max. frequency)Input resistance approx. 5 kΩ
Count inputMin. pulse duration > 100 µs (5 kHz), 17 ms (30 Hz)Max. counting frequency 5 kHz or 30 HzControl inputReset - external pulse, pulse length > 17 ms
- by switching the supply voltage off and on (start-up reset)
OutputSignal type PNPSignal duration Ordering code 0 651 109, 0.2 ... 1 ms or 20 ... 100 ms
Ordering code 0 651 114, 1 ... 20 ms or 100 ms ... 2 sSwitching voltage approx. VopSwitching current 100 mA
TECHNICAL DATA
Technical data
ORDER INFORMATION Setting range of the output impuls
Input max. 100 ms max. 2 sPNP 0 651 109 ––PNP and NAMUR 0 651 108 0 651 114
Attention: If Version 0 651 108 or 0 651 114 is operated with the PNP input INP 1, then the NAMURinput INP 2 must be connected to 0 V. The simultaneous use of both inputs is not possible!
CONNECTION DIAGRAM
Dimensions in mm
325Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
DIMENSIONED DRAWING
Programmable pulse scaling factor up to 1000:1 NAMUR generator input NPN or PNP transistor output Max. pulse frequency 5 kHz Integrated in modular system 400
PROGRAMMING
Plug-in Pulse Scaler for Modular System 400
Division factor, input attenuation and output mode are programmed with jumperslocated behind the front panel.
Programming example
TECHNICAL DATA Supply voltage Vop 24 VDC ± 15 %Current consumption 10 mAValue retention noneOperating temperature - 10 ... + 50 °CStorage temperature - 20 ... + 70 °CElectrical connection AMP connectors 0.8 x 2.8 mm, via connection boxMounting modular system 400Protection class (IEC 144) front IP 20, connection IP 00Vibrostability 50 m/s2 acc. to IEC 068-2-6General design acc. to DIN VDE 0411Weight approx. 50 g
InputsAmplitude thresholds < 2 V and > 8 V max. + 30 VDCActive edge positivePulse shape random (squarewave 1:1 for max. frequency)Input resistance 5.6 kΩ
Count inputMin. pulse duration 20 µs at 5 kHz, 200 µs at 50 HzMax. counting frequency 5 kHz/50 Hz, programmableControl input static behaviourReset - manual with button
- via reset pulse input, min. pulse length 10 ms- by switching the supply voltage off and on (start-up reset)
OutputSignal type PNP or NPN, programmableSignal duration approx. 25 msSwitching voltage Vop/0 V, depending on programSwitching current 400 mAMax. frequency 20 Hz
Components 2001326 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
327Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
CONNECTION DIAGRAM
ORDER INFORMATION Pulse scaler Ordering code 0 651 105Standard accessoriesConnection box Ordering code 1 405 566Connection box for NAMUR generator Ordering code 1 651 074Panel frame, black Ordering code 1 405 491
DIMENSIONED DRAWINGPulse scaler with connection box
Front view Side view Installation cutout
Dimensions in mm
* Output acc. to program
Components 2001328 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Input NPN or PNP Output NPN or PNP For electromechanical or electronic counters 35 mm DIN rail attachment
TYPICAL APPLICATIONS
Pulse Amplifier for DIN Rail Attachment
– Pulse amplifier for weak signals – Inverter when PNP signals are to beconverted into NPN signals (or viceversa)
Supply voltage Vop 10 ... 30 VDCCurrent consumption = switching current < 300 mAResidual ripple < 5 %Operating temperature - 10 ... + 50 °CStorage temperature - 20 ... + 70 °CElectrical connection screw terminalsMounting 35 mm DIN rail attachmentMounting position anyProtection class (IEC 144) IP 50, connections IP 00
InputAmplitude thresholds > 5.5 VDC or < with ext. resistorActive edge PNP or NPNPulse shape randomInput resistance 2.2 kΩMin. pulse duration 1 µsMax. counting frequency 1 MHz
OutputSignal type PNP or NPNSignal duration = input pulseSwitching voltage PNP Vop (- 1V), NPN 0 V (+ 1 V)Switching current max. 300 mA
Note: For actuation of electronic counters an additional load resistor of 1 kΩ must beconnected in parallel to the count input
TECHNICAL DATA
DIMENSIONED DRAWING
Dimensions in mm
Type 654
329Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Technical data
ORDER INFORMATION Pulse amplifier Ordering code 0 654 003
CONFIGURATION EXAMPLES
Type 654
Components 2001330 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Continuous duty module for preset counters 446, 447, 486, 487 and preset timecounter 489
Plugs into modular system 400 Integrated connection box
TECHNICAL DATA
Continuous Duty Module for Electrical Reset
Supply voltage Vop acc. to order informationPower consumption DC version 12 W, AC version 16 VAOperating temperature - 10 ... + 50 °CElectrical connection AMP connector 0.8 x 2.8 mmMounting modular system 400Protection class (IEC 144) IP 00Maintenance-free operation 1.5 x 106 resetsGeneral design acc. to DIN VDE 0435
InputSignal duration min. 15 ms, max. 100 % duty cycle
OutputSignal duration 250 msContact type floating changeover contactSwitching voltage max. 220 VSwitching current max. 20 VA/1 AReset frequency DC version max. 1 per 2 s, AC version max. 1 per 3 s
DIMENSIONED DRAWINGContinuous duty module with preset counter
Dimensions in mm
CONNECTION DIAGRAMTERMINAL ASSIGNMENT Terminal 1 – 2 Counter solenoid
Terminal 31 – 32 Floating reset pulseTerminal 20 – 21 - 22 Floating output signalTerminal 12 - 13 Power supply
ORDER INFORMATION Supply voltage Ordering code Supply voltage Ordering code
24 VDC 1 486 420 115 VAC 1 486 42124 VAC 1 486 423 220 VAC 1 486 422
Inquire for other voltagesNote: When this module is used, the counter no longer requires a connection box.
331Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Automatic Reset Module for Preset Counters
Automatic reset for preset counters 446, 447, 486, 487 and preset time counter489 with electrical reset
Plugs into modular system 400 Integrated connection box
TECHNICAL DATA Supply voltage Vop acc. to order informationPower consumption DC version 12 W, AC version 16 VAOperating temperature - 10 ... + 50 °CElectrical connection AMP connector 0.8 x 2.8 mmMounting modular system 400Protection class (IEC 144) IP 00Maintenance-free operation 1.5 x 106 resetsGeneral design acc. to DIN VDE 0435
OutputSignal duration DC version approx. 200 ms, AC version approx. 250 msContact type floating changeover contactSwitching voltage max. 220 VSwitching current max. 20 VA/2.5 AReset frequency DC version max. 1 per s, AC version max. 1 per 2 s
DIMENSIONED DRAWINGAutomatic reset module with preset counter
Dimensions in mm
CONNECTION DIAGRAMTERMINAL ASSIGNMENT Terminal 1–2 Counter solenoid
Terminal 12–13 Power supplyTerminal 12–31 Remote reset
(Pulse floating contact)Terminal 20–21–22 Output signal
ORDER INFORMATION Supply voltage Ordering code Supply voltage Ordering code
24 VDC 1 486 402 115 VAC 1 486 41224 VAC 1 486 409 220 VAC 1 486 413
Inquire for other voltagesNote: When this module is used, the counter no longer requires a connection box.
Components 2001332 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
For electronic preset counters type 711 and 781.4 With integrated connection box
TECHNICAL DATA
Power Supply Unit with Connection Box
Supply voltage Vop 110 or 220 VAC, depending on versionElectrical connection AMP connector 0.8 x 2.8 mmMounting modular system 400Mounting position anyProtection class (IEC 144) IP 00General design acc. to DIN VDE 0411
OutputSensor supply 24 VDC, max. 60 mA
DIMENSIONED DRAWINGCounter with power supply unit
CONNECTION DIAGRAM
Dimensions in mm
ORDER INFORMATION Version 110 VAC 220 VAC
Power supply unit 1 711 011 1 711 010
Note: If this module is used, the counter no longer requires a separate connection box.
Typ 711
Mains connection110/220 VACdep. on version
Sensor supplymax. 60 mA
Count input
not connected
Reset input
Output
max. 250 VAC
50 VDC 2 A, 100 VA
333Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Panel Frames for Hengstler Modular System 400
Attachment by two countersunk screws M4
Attachment by set screws
Attachment by set screws
Attachment by set screws
Plastic, black Ordering code 1 405 491Plastic, grey Ordering code 1 405 452 Dimensions in mm
Plastic, black Ordering code 1 405 492Plastic, grey Ordering code 1 405 453 Dimensions in mm
Die-castTextured paint, matt black Ordering code 1 405 010silver Ordering code 1 405 009 Dimensions in mm
Sheet steel Ordering code 1 405 093Textured paint, matt black Dimensions in mm
Size 1
Size 2
Size 3
Size 4
Components 2001334 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Panel Frames for Hengstler Modular System 400
Panel Frames"signo" + "tico"
Size 5
Ordering code 1 405 676 Dimensions in mm
Ordering code 1 405 679 Dimensions in mm
Ordering code 1 405 675 Dimensions in mm
for counters24 x 48in, size 1
in front panel
Ordering code 1 405 692 Dimensions in mm
Attachment by set screws
Die-castTextured paint, matt black Ordering code 1 405 493 Dimensions in mm
for counters48 x 48
in DIN cutout68 x 68
for counters48 x 96in, size 4
front panel
for counters48 x 48in, size 2
front panel
335Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Panel Frames for Hengstler Modular System 400
For filling a prepared countercutout
ORDER INFORMATION Dummy cap size 1 Ordering code 2 651 009Dummy cap size 2 Ordering code 1 651 018
DIMENSIONED DRAWING SIZE 2Dummy cap with attachment socket
Order-Nr. 1 405 693
1 counter 24 x 48 mm1 counter 48 x 48 mminfront panel size 3
Order-Nr. 1 405 696
2 counters24 x 48 mminfront panel size 2
DIMENSIONED DRAWING SIZE 1Dummy cap with attachment socket
Front view Side view Installation cutout
Dimensions in mm
Dummy Caps
Components 2001336 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Protective Cases with Screw Terminal Connection
TECHNICAL DATA Case fibreglass-reinforced plasticTransparent cover see "Accessories - transparent covers"Mounting screw or snap-on attachment, dep. on versionConnection screw terminals on the rear of the caseProtection class - screw-mounted case IP 00, (IEC 144) with mounted transparent cover: front IP 65, connections IP 00
- case with snap-on attachment: front IP 52, connections IP 00
Dimensioned drawing for screw attachment
Colour: light grey Ordering code 1 405 562Colour: black Ordering code 1 405 640 Dimensions in mm
Colour: light grey Ordering code 1 405 667Colour: black Ordering code 1 405 669 Dimensions in mm
Size 1
Size 2
Dimens. drawing for screw attachment
Dimensioned drawing for snap-on attachment
Colour: light grey Ordering code 1 405 666 Spare cover Ordering code 2 405 192*Colour: black Ordering code 1 405 668 Dimensions in mm
Size 1 Dimensioned drawing for snap-on attachment
Colour: light grey Ordering code 1 405 588 Spare cover Ordering code 2 405 191*Colour: black Ordering code 1 405 641 Dimensions in mm
Size 2
* On request
337Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Sealing Covers • Transparent Covers with Protection to IP 65
Flexible Vestolit sealing cover with metalframe for panel frames or protective casessize 1-2.The sealing set enables you to operate acounter through the cover.
Size 1for screwed front panel 60 x 50 mm Orde-ring code 1 405 615, silver colour
Parts supplied:Sealing set including metal frame, coverand retaining screws.
Size 2for screwed front panel 60 x 75 mm Ordering code 1 405 404, silver colourOrdering code 1 405 587, black
Size 1for screwed front panel 60 x 50 mmwith knob Ordering code 1 405 611with key lock Ordering code 1 405 612
Size 2for screwed front panel 60 x 75 mmwith knob Ordering code 1 405 613 with key lock Ordering code 1 405 614
Size 1
Size 2
Size 2
Size 1
Transparent covers together with the fittingpanel frame or protective case offer protec-tion against dust and water from the frontfor switch-panel incorporation.
Protection class IP 65 acc. to DIN 40 050.Transparent covers are made of makrolon,seals are made of synthetic rubber.
Parts supplied:Transparent covers including seals.1 key per unit for versions with lock.
Components 2001338 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Case for Surface Mountingand DIN Rail Attachment
Attachment by means of 35 mm DIN rail or with screws Case made of insulating material Installation of counters of the modular system 400 in protective case size 2
TECHNICAL DATA Case ABS plasticColour greyResistance to heat up to 85 °CBurning properties VDE 0304 part 3/5.70, degree IIIaMounting - snap-on attachment to 35 mm DIN rail
(DIN 46277/DIN EN 5022), lengthwise or crosswise- screw-mounting 2 x M4 or M5
Connection by cable, cable inlet with PG-cable gland or feed-through
DIMENSIONED DRAWING
Case (without counters) Ordering code 1 680 089
Delivery includes case compl. with protective case size 2 (12-way connectors) withoutcounters.
ORDER INFORMATION
Dimensions in mm
Type 680
339Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Measuring Wheels
In order to avoid errors when using mea-suring wheel actuation, it is importantthat the slip is kept as low as possible.When choosing a profile (surface struc-ture), special attention must be given tothe properties the material being mea-sured, such as elasticity, thickness andinteraction resistance. Slippage is alsoinfluenced by the width of the contac-ting measuring wheel, the pressure of
contact, the tensile stress in the mate-rial that is being measured and the angleof wrap. The angle of wrap should be aslarge as possible. Wheel bodies are madeof cast metal or plastics (see designa-tion).The position of the measuring wheelshould be chosen such that the materialmoves away from the bearing of the sen-sor.
Use the following measuring wheels fordifferent transmission ratios of counters:
APPLICATION
CORRECTMEASURING WHEEL OR PULSEGENERATOR
WRONGMEASURING WHEEL OR PULSEGENERATOR
MEASURING WHEELCIRCUMFERENCE/TRANSMISSION RATIO
Counter transmission measuring wheelratio circumference500:1 0.2 m (1/5 yd.)50:1 0.2 m (1/5 yd.)5:1 0.2 m (1/5 yd.)2:1 0.5 m (1/2 yd.)1:2 0.2 m (1/5 yd.)1:5 0.5 m (1/2 yd.)1:20 0.2 m (1/5 yd.)
Components 2001340 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Measuring Wheels
6 Plastic coatedUsed e.g. for wire, greased metals, steel pro-files
7 Card bandUsed e.g. for carpets and coarse textiles
Profile 1 Profile 2
Profile 3/4 Profile 5
1 with rims, aluminium with fine crossknurlingUsed e.g. for threads and yarns
2 Rubber profile, glued onUsed e.g. for paper and cardboard, cable mea-surement, non-greasy metal, fleece, wood(rough or finished), soft and hard plasticmaterials;A = soft, highly adhesive rubber coatingB = good-grip, low-wear rubber
OVERVIEW
Profile 6 Profile 7
3 Rubber coating with parallel knurling, vul-canizedUsed e.G for rubber, leather. textiles, floo-rings, glass
4 Aluminium with parallel knurlingUsed e.g. for rubber, soft plastic materials,wood with rough surface, certain textiles
5 With rims, aluminium with parallel knur-lingUsed e.g. for threads, yarns, ribbons
MEASURING WHEEL circumference/transmission ratio
341Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Measuring Wheels Technical data
ORDER INFORMATIONAluminium
PLASTIC
Width of B o r e Circumf. Profile contact surf.
mm 4.0 mm 6.0 mm 7.0 mm 10.0 mm
0.2 m 1 4 0 601 014 0 601 015 0 601 017 ––2 A 12 0 601 018 –– –– ––2 B 12 0 601 118 0 601 048 –– 0 601 0492 A 24 0 601 020 –– 0 601 092 ––2 B 24 –– 0 601 192 ––4 20,5 0 601 023 ––4 20 –– 0 601 093 ––5 16,5 0 601 026 –– 0 601 094 ––
0.5 m 2 A 25 –– –– 0 601 050 ––2 B 0 601 150 0 601 1513 25 –– –– 0 601 059 0 601 1564 25 –– –– 0 601 121* 0 601 1575 16 –– –– 0 601 052 ––6 25 –– –– 0 601 063* 0 601 1637 26,5 –– –– 0 601 054 ––
1/5 yd. 1 4 0 601 034 –– 0 601 037 ––5 16,5 –– –– 0 601 096 ––
1 Fuß 2 A 25 –– –– 0 601 071 ––2 B 25 –– –– 0 601 171 ––
0.2 m 1 4 0 601 100 –– –– ––0.5 m 4 25 0 601 301 ––
6 25 –– –– 0 601 300 ––
* meets PTB requirements
Inquire for other measuring wheels
Components 2001342 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Stroke Levers
This overview shows different kinds oflevers available. The stroke levers are notsupplied with the counters and must beordered separately.
A "standard lever" is stated with theorder information for mechanical strokecounters.
A
D
E
B
C
OVERVIEW
343Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Stroke Levers Technical data
DIMENSION TABLE
Bore Shape mm A B C D E
3 –– –– 0 600 007 0 600 010 0 600 0124 0 600 126 0 600 026 0 600 009* 0 600 047* 0 600 0134 –– –– 0 600 061* –– ––5 –– 0 600 003 –– –– ––5.5 –– 0 600 090 –– –– ––7 –– 0 600 005 –– –– ––
* on requestInquire for other stroke levers
ORDER INFORMATION
Spark Quenching
RC UNITFor contactors, solenoids etc.
ORDER INFORMATION
VARISTORFor small relays
Loads operated directly by the counter,such as contactors, solenoids etc., pro-duce a very high inductive voltage whenthey are switched off.This leads to sparking at the switchcontacts and causes contact burning,thus reducing the lifetime or the inte-
grated relay. Voltage peaks may alsocause interfering pulses.
Therefore we recommend to adopt oneof the following spark quenching mea-sures for inductive loads.
RC unit Ordering code 3 536 801Varistor Ordering code 3 540 777
Ordering code a b c d e f g h i0 600 003 34 40.5 8 5 M 3 29.5 4 –– ––0 600 005 45 55 10 7 M 4 41 5 –– ––0 600 007 26 31.5 7 3 M 2.6 21.2 –– –– ––0 600 009 22 28 7 4 M 4 18 18 3 110 600 010 28.7 33.7 8 3 M 2.6 25.4 1.8 2.5 5.50 600 012 28.2 33.5 7 3 M 2.6 17.8 2 10.7 50 600 013 28.2 33.5 7 4 M 4 17.8 2 10.7 50 600 026 35.5 41.5 7 4 M 4 31.5 3.5 –– ––0 600 047 27.5 35 7 4 M 3 24 2.5 2 60 600 061 22 28 7 4 M 4 18 15 3 ––0 600 090 33 39.5 8 5.5 M 4 28.5 4 –– ––0 600 126 35 41.5 6 4 M 4 –– –– –– ––
Load voltage
Load voltage
Components 2001344 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Flat steel bar Flat steel bar for the installation ofconnection boxes of the modular system400 12 x 3 x 105 mmFor description see installation instructions
Order information Ord. code 2 405 058
Mounting Frame
This mounting frame is designed for theinstallation of mechanical counters type 225 and 250.The mounting frame is attached bymeans of four countersunk screws (sup-plied with the frame). The counter can
easily be installed once the frame is inplace. Slide the counter into the moun-ting frame and fasten to the baseplatefrom below.
DIMENSIONED DRAWING
Dimensions in mm
Dimensions in mm
ORDER INFORMATION Mounting frame for counters type 225 or 250, complete Ordering code 1 250 056
Flat connectors Flat connector 2.8 x 0.8 mm for electri-cal connection of all counters (except forcounters with screw terminals)
Order information Ord. code 3 530 077
Glossary
345Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Alternating current
The following symbols are used in the ordering lists for mechanical counters.
See count
See reset modes; automatic reset
See reset modes; automatic reset
Registers the number of signals released at the main output. In counters with auto-matic repetition, the number of repeated cycles is counted. (See also operating mode)
Output signal; is present until reset conditions (e.g. reset signal) are met.
System for communication between several devices via a data line (see interface)
Accordance of set value (preset) and actual value (count)
See operating mode
In modular system 400 (plug-in type counters), the term "connection box" is used forthe insert socket of the counter (see, for example, the totalizing counter in the modu-lar system).
Approval by the Canadian Standards Association
Count correction
Display of counted value (actual value) at the counter.
Correction of count; correction is not stored.
See count input
Output signal of the counter; can be used independently of counter advance sensefor control purposes (e.g. drive unit control). The counter advance sense signal ope-rates independently of OUT signal status.
In mechanical counters only: (+) adding in the specified sense of rotation+ (–) adding in the specified sense of rotation; subtracting in the reverse
direction+ (+) adding in both senses of rotation– (–) subtracting in the specified sense of rotation; adding in the reverse
direction
See count frequency
Number of count pulses per second [Hz]In pneumatic counters, the non-pulse period must be long enough to allow pressureto drop to approx. 0.15 bar for a minimum of approx. 12 ms.
AC [~]
Actuation
Actual value
Automatic repetition
Auto-reset
Batch counter
Bistable signal
Bus
Coincidence
Coincidence mode
Connection box
CSA approval
COR
Count
Count correction
Counter advance sense input
Counter advance sense signal
Counting mode
Counting rate
Counting frequency [f]
Actuation both sides
Actuation on right
Actuation on left
Actuation on front/rear
Actuation below
Mis
cella
neou
s
Glossary
For adding, subtracting or differentialcount. The counter is equipped with a sub-tracting and an adding input.
For adding, subtracting or differentialcount. The counter is equipped with acount input and a counter advance senseinput.
For forward/backward counting. The counter is equipped with a 2-channel input.Signals are phase-shifted by 90° to allowcounter to recognize count advance senseautomatically. The count input can be pro-grammed for single, double or 4-foldeva-luation.
DC [=] Direct current
Can be programmed in electronic counters
See count input
Direction; see counter advance sense
Components 2001346 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Count input
– Differential
- Count direction
– Phase discriminator
DC [=]
Decimal point
Differential input
DIR
Pressure/bar
Counting rate pulses/sExample: Approximately 12 pulses/s are reached in a pressure
range of 6 bar and at an ambient temperature of 20 °C.
Note: Increasing flow or length of tubing reduces maximumpossible counting rate and thus also warming.
Ambient temperature
Glossary
347Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
The following symbols are used inmechanical counters to indicate thedirection of rotation of drive shaft(please note counting mode):
Blocking of function (see also inhibit)
Display
A display value is "frozen" during counting (for easier reading during fast counts)
Ratio of pulse length to non-pulse period; at 40 % duty cycle, pulse length is 4/10and non-pulse period 6/10 of total time (see specifications in technical data).
A function is triggered by a pulse (the pulse edge only is evaluated) at the corre-sponding dynamic input; the counter continues operation regardless of pulse width.
See duty cycle
See time counter
Electromagnetic compatibility; see interference immunity
Preset counter with electrical count input and pneumatic control signal generation(see pneumatic preset counter)
See inhibit
See operating mode
Inhibit; see inhibit
Blocking of counter input during counting operation.
The interface is used for communication between counter and external systems.Counter values can be input or output via the interface.
Testing procedure according to IEC 801 Section 4- Test for interference immunity against bursts (coupling to lines)
The test values are divided into 5 steps:
Stage Power lines Data and control lines
1 0.5 kV 0.25 kV2 1.0 kV 0.5 kV3 2.0 kV 1.0 kV4 4.0 kV 2.0 kVX special special
Test procedure according to IEC 801, Section 2- Electrostatic discharge on the surface and surroundings of the test object. The
test values are divided into 4 classes:
Direction of rotation
Disable
Display
Display memory
Duty cycle [ED]
Dynamic behaviour
ED
Elapsed-time meter
EMC
E/P converter
Gate
Increment mode
INH
Inhibit
Interface
Interference immunity
towards observer
away from observer
clockwise
counter-clockwise
clockwise
counter-clockwise
Class Test voltage1 2 kV2 4 kV3 8 kV4 15 kV
– Radio interference according to VDE 0871
Count input
All Hengstler products are subjected to strict quality inspection, the results of whichcan be attested by an inspection certificate according to DIN 55 350-18-4.1.1.
See protection class
Blocking of certain keyboard inputs
The reset button can be operated only by means of a key.
Liquid Crystal Display; passive display requiring external light or backlighting to beread
Light Emitting Diode; active display lighting up as long as supply voltage is fed to thecounter
See operating mode
Signal is active for a defined period.
Not connected; designates unassigned connections in connection diagrams.
Non-volatile; electronic non-volatile memory for electronic counters for value reten-tion in case supply voltage is interrupted.
The collector of the output transistor is not terminated (i.e. open)
For mechanical counters:A Max. operating angle
Movement of the lift arm from neu-tral position to the stop in the coun-ter. To ensure long service life, howe-ver, the max. operating angle shouldnot be fully utilized, or limited outsideof the counter.
B Min. operating angleMovement of the lift arm from neutral position to the operating point of thecounter
C Transition angleMovement of the lift arm from the operating point to the stop in the counter(max. operating angle - min. operating angle = transition angle)
Glossary
Components 2001348 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Input
Inspection certificate
IP
Keylock
Key reset
LCD
LED
MOD
Monostable signal
NC
NV memory
Open collector
Operating angle
Glossary
349Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Programming the counter functions for a specific application.
In this mode, the output signals are activated within the set range.
After a preset value is reached, the corre-sponding signal is released and the coun-ter jumps directly to the next preset value(without reset). (See also program mode)
The output signals are activated each time the count and preset value coincide (coincidence), regardless of counter advance sense.The preset values are processed one after the other independently of their settingvalue. The counter recognizes preset value 2 only after preset value 1 has been rea-ched.
After a preset value has been reached,the corresponding output signal is relea-sed, and the counter is reset to its initialvalue; thus the next preset value isalways processed starting from theinitial value.
Resetting of counter to the programmed main preset value.Standard programmingfor subtracting count.
Output (preset, zero signal, etc.)
When maximum display capacity has been exceeded, this is indicated by the corre-sponding code in the display of the counter. Deleted by a reset command.
Module frame for a counter
Time measurement; the time is measu-red for the duration of one period (pulse+ separation). The display is updated in
cycles.
Preset counter with pneumatic count input and electrical control signal generation(see pneumatic preset counters)
See count input
An output signal released before the main preset value is entered according to thesetpilot signal value.
Processing of angular and path information, thus allowing position to be determi-ned; no control outputs.
See reset modes
The factor by which the incoming pulses in the counter are multiplied. Used whentheincoming count pulse does not correspond to the desired display unit, e.g. lengthmeasurement with an existing roller mechanism and standard pulse generator.
Operating mode
– Range mode
– Increment mode
– Coincidence mode
– Program mode
– Reset mode
– Set mode
OUT
Overflow indicator
Panel frame
Period measurement
P/E converter
Phase discriminator
Pilot signal
Position indicators
Power-up reset
Prescaler
Glossary
Preset counters are counters with control functions, e.g. shutting down a machineafter a certain number of pieces has been produced.
Setting value (a set value); a signal is released when this value corresponds with thecounted value.
Count reset with simultaneous program reset.
Designated with IP (international protection) and a 2-digit number according to DIN40050
Degree of protection against penetration by solid bodies:0 no special protection provided1 solid bodies of > 50 mm; no protection against intentional access2 solid bodies of > 12 mm; fingers, etc. cannot be inserted3 solid bodies of > 2.5 mm; tools, wires, etc. (thickness > 2.5 mm) cannot be
inserted4 solid bodies of > 1 mm; tools, wires, etc. (thickness > 1 mm) cannot be inserted5 dust in harmful quantities; complete protection against contact6 dust (dustproof); complete protection against contact
Degree of protection penetration by water0 no special protection provided1 water dripping vertically2 water dripping up to 15° from the vertical3 water dripping up to 60° from the vertical (spray)4 water from all directions (splashing)5 water jet projected from a nozzle, from all directions (jet spray)6 heavy seas or powerful water jet (flooding)7 immersion in water under a defined pressure and period of time (immersion)8 submersion in water indefinitely. Conditions to be described by the manufacturer
(submersion) (water shall not penetrate unit in critical amounts under conditions1-8)
Example: IP54A unit with this designation is protected against the penetration of dust in harmfulquantities and against splashing water.
See prescaler
Approval by the Physikalisch Technische Bundesanstalt (appropriateness for verifica-tion)
See counting frequency
– for electromechanical AC countersAn AC counter can be operated directly with mains voltage.Attention! If the counter coil lies parallel to a chain of contactors which are sup-plied by a common isolation transformer (VDE regulations), extremely high vol-tage peaks result which reach several kV capable of destroying the counter coil.In this case, we recommend operating the counter with 24 VAC via a separatetransformer.
Components 2001350 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Preset counter
Preset value
Program reset
Protection class
– 1st digit
– 2nd digit
PSC
PTB approval
Pulse frequency
Pulse generation
Glossary
351Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
– for electromechanical DC countersfed by battery voltage
up to 25 pulses
Correct counting results depend to a large extent on the appropriate choice of pulsegenerator. In mechanical pulse generators, bounce contact of > 3 ms should not occur,as miscounts will otherwise be registered. For counting rates of up to 10 Hz, micros-witches, limit switches, limit switches or cam-actuated sets of contact springs aresuitable; for counting rates of up to 30 Hz, miniature relays can be used. The use ofelectronic pulse generators (proximity switches, light barriers, shaft encoders, etc.)is recommended for counting rates higher than 30 Hz.
A component which generates an output pulse after a specified number of input pul-ses. Used whenever the incoming count pulse does not correspond to the desired unitof display.
See prescaler
Time measurement; the duration of apulse is registered and displayed whenthe pulse is ended until this value is up-dated.
See operating mode
See operating mode
Reset; see reset
Resetting of a counter to its initial value
- manual reset by pressing the reset key- electrical reset triggered by signal at reset input- automatic reset in preset counters after main preset value has been reached- interruption and re-activation of power supply (power-up reset)
See operating mode
Specification of revolutions per unit of time (1/min, 1/h or 1/sec)
Voltage supplied to feed a pulse generator by the counter.
Pulse generator
Pulse scaler
Pulse-weighting factor
Pulse width measurement
Range mode
Range signal
RES
Reset
Reset modes
Reset operation
Rotational speed [n]
Sensor supply
1.
2.
Glossary
See operating mode
The value to which a counter will be set. Two types of setting values exist: one-timeand repeatable setting values.The count is set to a specific value. This value is not stored and cannot be recalled.The counter is set to a specific value (e.g. preset value). This value can be recalled atall times.
See preset value
Hengstler counters are shock-tested according to IEC 68 Section 2-27Test example: impulsive shocks to test object from 6 directions with an accelera-tion of 500 m/s2 and a duration of 6 ms per direction each.
For electromechanical counters– with diodes
For DC counters and counting ratesof up to 10 Hz on counter coils andresetting solenoids.
The diode used should withstand apeak inverse voltage of approx. 5xrated voltage.
– with RC combinationsFor DC counters and counting ratesof > 10 Hz; for AC counters if thecounter is triggered with sensitivecontacts.
The counter functions are carried out as long as the signal is present.
With this function, the count is stored as a preset value by pressing a button. Ente-ring the preset value via keyboard is therefore not necessary, or is possible optionally.
Registers the operating time of machines, devices, etc. Preset time counters are also available for tasks involving control functions.
Moment of a force M=F*L [Nm, Ncm, Nmm]
A counter which only adds up received pulses, but has no control functions.
Total sum counter
See trailing signal
A bistable, freely variable range signal which "trails along" when the main preselec-tion is changed.
Components 2001352 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
Set mode
Setting value
– One-time – Repeatable
Set value
Shock stability
Spark quenching
Static behavior
Teach in
Time counter
Torque [M]
Totalizing counter
Totalizer
Trail
Trailing signal
Glossary
353Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
In mechanical counters, the first number indicates the rotation of the counter shaft;the second number shows the count in the display as it changes. Example: with atransmission ratio of 1:10, the display jumps by 10 per revolution of the counter shaft.
US approval (Underwriters Laboratories Inc.)
Counter advance sense (adding or subtracting count)
Preservation of the "counted and preset values" in case of power failure.
Hengstler products are subjected to standard vibrostability testing according to IEC68, Section 2-6.Test example:The test object is subject to an acceleration of 50 m/s2 in the three main axis at avibration frequency of 10...500 Hz. The sweep rate is 1 octave/min. In fatiguetesting, a counter must withstand 20 cycles (i.e. approx. 4 hours) including a per-formance test during the first and last cycle.
See reset
Transmission ratio
UL approval
Up/down
Value retention
Vibrostability
Reset to zero
Components 2001354 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
General Terms and Conditions
4.8 Partial deliveriesThe Seller shall be entitled to perform reason-able partial deliveries to an extent acceptableto the Purchaser. If the Purchaser demonstra-tes to the Seller that it cannot be reasonablyexpected to accept partial deliveries due toeconomic reasons, the Purchaser shall be ent-itled to withdraw from the contract. In theevent of delayed delivery of a partial shipment,the Purchaser shall not be entitled to claimdamages for the Seller’s failure to perform theentire contract, unless intention or gross neg-ligence by the Seller can be evidenced. In theevent of intention or gross negligence by theSeller’s other agents (clause 4.7) or in the eventof the Seller’s liability for ordinary negligencein accordance with clause 4.7, the Purchasershall only be entitled to claim the lump-sumcompensation stipulated in clause 4.7.4.9 In the event of call orders being agreed bet-ween the Seller and Purchaser, the Seller shallgrant the Purchaser a call period of 6 months.After expiry of the call period, the Seller shallbe entitled, at its option, to invoice the orderedgoods or to cancel the order.4.10 In the event of special-design goods(goods not listed in Seller’s catalogue or in pricelist), the Seller shall be entitled to perform deli-very in excess of or short of the ordered quan-tity. For up to 100 ordered items, the quantityof delivered items may exceed or fall short ofthe order volume by up to 15 %. In the eventof the order volume exceeding 100 items, thequantity of delivered items may exceed or fallshort of the order volume by up to 10 %. In theevent of the delivery exceeding or falling shortof the order volume, the agreed item price shallremain unaffected thereby.
5. Passing of risk in goodsIrrespective of whether freight has been agreedto be performed at no charge to the Purchaser,any risk in the goods shall pass to the Purcha-ser at the dates specified hereunder:a) Deliveries not including erection or installa-tion: when the equipment, fit and ready for theintended use, has been dispatched, with theSeller’s means of transportation or otherwise,or collected. Packaging shall be performed withutmost care.b) Deliveries including erection or installation:upon integration of the equipment into thePurchaser’s production operations or, if a testrun has been agreed, upon successful comple-tion of the test run, provided that the test runor integration into the Purchaser’s productionoperations is performed immediately upon suc-cessful completion of erection or installation.In the event of the test run or integration intothe Purchaser’s production operations beingdelayed by over 14 days, the risk in the goodsshall pass to the Purchaser for the duration ofthe delay.c) In the event of shipment, delivery or com-mencement/performance of erection or instal-lation being delayed at the Purchaser’s requestor for reasons attributable to the Purchaser, therisk in the goods shall pass to the Purchaser forthe duration of the delay. At the Purchaser’srequest and expense, the Seller shall take outthe insurance requested by the Purchaser.
6. Shipment6.1 Shipment shall be performed at the Purcha-ser’s exclusive risk and expense. In the event ofthe Purchaser not giving specific shippinginstructions, shipment shall be performed tothe best of the Seller’s judgement. The Sellershall not be under any obligation to select the
agreed delivery period.4.3 In an event of force majeure or any otherevent which is unforeseeable and unavoidableand beyond the Seller’s control and which pre-vents partial or total performance of contrac-tual obligations of the Seller or its vendors indue time, such as difficulties in the procure-ment of materials, breakdowns, strikes, lock-outs, lack of means of transportation, interfe-rence by authorities, problems associated withenergy supply, etc., the delivery period shall bereasonably extended. If the performance ofcontractual obligations is rendered impossibleor unreasonable by any such event, the Sellershall be relieved of its obligations to performdelivery. In the event of delivery being delayedby over 2 months, the Purchaser shall be entit-led to terminate the contract. The Purchasershall not be entitled to claim damages in theevent of an extension of the delivery period orin the event of the Seller being relieved of itsobligation to perform delivery. The Seller shallnot be entitled to claim force majeure or anyother of the above events, unless it haspromptly informed the Purchaser thereof.4.4 The provisions hereunder shall be subject tothe Purchaser receiving deliveries from othervendors in due time and in accordance withrequirements.4.5 CancellationIn the event of a delivery deadline being excee-ded by over 2 weeks for reasons other thanthose mentioned in clause 4.3, the Purchasershall be entitled to set the Seller a reasonablegrace period for the performance of its deliveryobligations. If the Seller fails to perform deli-very by the end of the grace period, the Purcha-ser shall be entitled to cancel the contract.4.6 Liability for damage caused by delayed per-formanceIn the event of delays in the performance ofcontractual obligations, the Purchaser, in addi-tion to its right to claim performance, shall notbe entitled to claim damages for delayed deli-very, unless the Seller, its authorized represen-tatives or its executives are guilty of intentionor gross negligence and the Purchaser is ableto furnish proof that it has suffered damagecaused by such delay and that such damagewas foreseeable by the Seller.The Seller shall not be liable for damage cau-sed by ordinary negligence.4.7 Limitation of liability in the event ofdefaults other than those mentioned in clause4.6:In the event of intention or gross negligence bythe Seller’s other agents (Seller’s employeesother than executives or other third parties) orin the event of the Seller’s liability for failure toperform a principal contractual obligation dueto ordinary negligence (Article 9, clause 2, sub-clause 2 AGBG [General Terms and ConditionsAct]), the following provision shall apply:In the event of the Purchaser being able to fur-nish proof that it has suffered damage fore-seeable by the Seller and caused by delay forwhich the Seller is responsible, the Purchasershall be entitled to claim damages for delayedperformance equal to 0.5 % of the value of theportion of the delivery or service not ready forthe intended use due to delayed completion ofany components thereof for each completedweek of delay, not to exceed a total of 5 % ofthe value of such portion of the delivery. In theevent of ineffectual expiry of the grace period,the Purchaser shall not be entitled to any addi-tional claims. The validity of clause 4.6 shallremain unaffected.
1. General provisions1.1 The Seller hereby agrees to sell goods sub-ject to the General Terms and Conditions con-tained herein. The Purchaser shall be deemedto have accepted these General Terms and Con-ditions upon placement of an order.1.2 Conflicting conditions of the Purchaser,even if not expressly refused by the Seller, shallnot be binding on the Seller unless specificallyagreed to by the Seller in writing. Conflictingconditions of purchase agreed to by the Sellershall exclusively apply to the transactions forwhich they have been accepted.
2. QuotationsQuotations are submitted without engage-ment. The Seller shall not be under any obliga-tion to perform delivery until and unless theSeller has confirmed an order in writing.
3. Prices3.1 The Seller’s prices shall be indicated in Euro.For delivery ex works, prices shall be under-stood not to include erection, installation andpackaging and shall be invoiced plus valueadded tax in accordance with the legal per-centage valid at the date of shipment.3.2. In the event of an increase in costs attri-butable to an increase in wages/salaries, mate-rial prices or taxes or public duties during theperiod between the placement of the order andthe delivery date, the Seller shall be entitled toincrease its prices accordingly.3.3 Packaging shall be invoiced at cost. The Sel-ler agrees to accept returned packaging usedfor shipment of its goods if returned by thePurchaser free of charge to the Seller and to theextent the Seller is under an obligation toaccept returned packaging in accordance withthe Packaging Regulations of 12 June 1991.3.4 Prices shall not include return acceptanceof electronic scrap. In the event of legal provi-sions and/or environmental regulations requi-ring the Seller to accept return of used equip-ment or parts originally delivered by the Seller,the Purchaser shall bear the costs incurred forthe return shipment and return acceptance(utilization/disposal) of such equipment andparts.
4. Delivery/Delivery deadlines/Delays4.1 The delivery period for shipments and ser-vices shall commence on the date of the writ-ten confirmation of order. Compliance withdelivery deadlines shall be subject to thereceipt of all documents, permits and approvalsto be submitted to the Seller by the Purchaser,approval of drawings and plans by the Purcha-ser in due time and the Purchaser’s compliancewith the payment conditions contained herein.In the event of the Purchaser failing to complywith these requirements in due time, the deli-very period shall be reasonably extended.4.2 Compliance criteria:a) Deliveries not including erection or installa-tion: the delivery deadline shall be deemed tohave been complied with if the equipment, fitand ready for the intended use, has beendispatched or collected within the agreed deli-very period. In the event of delivery beingdelayed for reasons for which the Purchaser isresponsible, the delivery period shall be deemedto have been complied with if the Purchaser isnotified by the Seller within the agreed deliveryperiod that the shipment is ready for dispatch.b) Deliveries including erection or installation:the delivery deadline shall be deemed to havebeen complied with if delivery, erection and/orinstallation have been completed within the
355Components 2001 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
General Terms and Conditions
during the warranty period commencing on thedate of passage of risk in goods, or if, irrespec-tive of the period of operation of the parts andwork, the usability of any parts or work is sub-stantially affected for reasons that can bedemonstrated to have been caused by circum-stances arising prior to the passage of risk inthe goods, including but not limited to faultydesign, materials or workmanship, then theSeller shall, at its option, rectify the damage,replace the defective parts or reperform thework at its own expense.9.2 The Seller’s liability shall not apply to nor-mal wear and tear.9.3 The Purchaser shall not be entitled to with-hold payments, unless it has filed a notice ofdefects which is not contested by the Seller.9.4 The Purchaser shall give the Seller reason-able opportunity and grant the Seller a reason-able period of time to rectify the defect. In theevent of the Purchaser’s failure to grant suchreasonable period of time, the Seller shall berelieved of its liability for the defect. In theevent of the Seller’s failure to rectify the defectwithin the grace period granted by the Purcha-ser or in the event of rectification being impos-sible or refused by the Seller, the Purchasershall be entitled to terminate the contract ordemand a reduction of the purchase price.9.5 The Purchaser’s right to assert claims resul-ting from defects shall be barred by the statureof limitation after 6 months from the date ofthe notice of defects.9.6 In the event of the Purchaser or third par-ties performing improper modification or repairwork on the goods delivered by the Seller, theSeller shall be relieved of any liability for theconsequences of such work.9.7 Other claims asserted by the Purchaseragainst the Seller or the Seller’s agents, in par-ticular claims brought forward as a result ofdamage not caused directly to the delivereditems (consequential damage), shall be exclu-ded, unless the Seller is under an obligation toassume liability for personal injury or damagecaused to privately used items in accordancewith the Product Liability Code or guilty ofintention or gross negligence or unless thegoods do not conform with the agreed specifi-cation.9.8 The above provisions shall also apply to thePurchaser’s claims for rectification of defectsor replacement of defective items or claims fordamages resulting from suggestions or nego-tiations submitted or held before or after theeffective date of the contract or from the vio-lation of contractual secondary obligations.9.9 Claims for damages resulting from thegoods not complying with the agreed specifi-cation shall remain unaffected by these provi-sions.
10.Cancellation/Lump-sum damagesIf the Purchaser fails to furnish collateral secu-rity or effect payment or an installment in duetime and if the requirements of Article 326 BGB[German Civil Code] are given (fixed time limitunder penalty of rejection), the Seller shall beentitled to claim lump-sum damages equal to35 % of the gross contract value, exclusive ofvalue added tax, without prejudice to thePurchaser’s right to furnish proof of a minordamage it has suffered. Return shipmentsresulting from defective orders shall be perfor-med at the Purchaser’s risk and expense. In suchevents the Seller shall be entitled to charge thePurchaser a reasonable processing fee, not toexceed 20 % of the gross invoice amount andexclusive of value added tax.
11. Impossibility of performanceIn the event of impossibility of the Seller’s per-formance, the Seller shall not be liable for ordi-nary negligence.In the event of the impossibility of the Seller’sperformance being attributable to intention orgross negligence by the Seller’s other agents(clause 4.7) or in the event of the Seller beingresponsible for a violation of a principal con-tractual obligation despite circumstances ofordinary negligence (Article 9, clause 2, sub-clause 2 AGBG [General Terms and ConditionsAct]), any claims for damages asserted by thePurchaser shall be limited to the compensationof direct damage, provided that such damagewas foreseeable at the effective date of thecontract and was typically caused by theimpossibility of performance. Claims for com-pensation of lost profits asserted in connectionwith the claims for damages due to the Seller’sfailure to perform shall be limited to 10 % ofthe gross invoice amount, exclusive of valueadded tax, charged for that portion of the Sel-ler’s delivery whose intended use by thePurchaser, as set forth in the contract, is preclu-ded by the Seller’s failure to perform.
12.Other claims for damagesUnless otherwise provided in the General Termsand Conditions contained herein and irrespec-tive of the legal grounds, the Purchaser shallnot be entitled to assert claims for damagesresulting from faults at the time of conclusionof the contract, positive violation of contrac-tual obligations, deficiencies in title, unlawfulacts, etc., unless the Seller is under an obliga-tion to assume liability for personal injury ordamage caused to privately used items inaccordance with the Product Liability Code orguilty of intention or gross negligence. The Sel-ler shall not be liable for damage caused byordinary negligence, unless the Seller is res-ponsible for having culpably violated a princi-pal contractual obligation (Article 9, clause 2,sub-clause 2 AGBG [General Terms and Condi-tions Act]). In the event of the Seller, subject tothe provisions hereunder, having to assume lia-bility for reasons of ordinary negligence or forreasons of intention or gross negligence by theSeller’s other agents (4.7), the Seller’s liabilityshall be limited to the compensation of thedirect damage, not to exceed 50 % of the valueof the damage and/or loss suffered in connec-tion with contract preparations or delivery. Anyother settlement shall be subject to the provi-sions set forth in clause 11. Any other provi-sions governing the limitation of the Seller’sliability subject to the General Terms and Con-ditions contained herein and the Seller’s liabi-lity according to the Product Liability Codeshall remain unaffected by this provision.
13.Payment conditions13.1 Payment shall be effected net cash within30 days from the date of the invoice.13.2 This provision shall also apply to partialdeliveries. Agreements concerning cash dis-counts shall remain unaffected thereby. In theevent of the Purchaser failing to perform pay-ment when due, the Seller, after giving noticeof default to the Purchaser, shall be entitled tocharge interest at an interest rate exceedingthe official discount rate of the Deutsche Bun-desbank [German Central Bank] by 3 %.13.3 Any payment shall be deemed to havebeen made in due time if the transferred sumor cheque is credited to the Seller’s account indue time, irrespective of the date of the paym-ent order.
most conveniently priced shipping method.6.2 The Seller agrees to take out a shippinginsurance at cost, provided that such obligationis stipulated in the order. The Seller shall not beunder any general obligation to take out suchinsurance.
7. Equipment erection and installation7.1 Prior to the performance of erection orinstallation work, the Purchaser shall provide,of its own account, all necessary informationconcerning the location of subsurface or con-cealed power lines, gas pipes, water pipes andthe like as well as structural data.7.2 The following requirements shall be fulfil-led at the installation site:a) Mains supply by means of separate powercircuit for connection with distributor; sepa-rate fuse for central processing unit, concen-trator and PC system (no earth leakage circuitbreaker).b) Mains voltage fluctuations must not exceeda tolerance of +10/-15 % of the setpoint vol-tage.c) If substantial dips in the mains voltage levelare expected to be caused by high voltage sur-ges, the Purchaser shall provide suitable inter-ference filters to prevent such voltage dips.- The required data cables for connection withperipherals shall be provided by the Purchaser.Such cables shall comply with the requirementsapplicable to the installation of telecommuni-cation cables of PTT-approved private branchexchanges to avoid interference.7.3 All necessary preparations shall be comple-ted to such an extent that the Seller’s servicepersonnel is able to commence installationand/or commissioning work immediately uponarrival at the installation site and to performsuch work without any interruption.7.4 In the event of erection, installation or com-missioning being delayed for reasons not attri-butable to the Seller, the Purchaser undertakesto reimburse the Seller the costs incurred by theSeller as a result of such delay, in particularcosts incurred as a result of waiting time or dueto additional travels of the Seller’s personnel.7.5 Services shall be rendered on the basis ofthe rates for working, travel and waiting timeand on the basis of travel expenses, hotelaccommodation rates and daily allowancesagreed in the order.7.6 The Seller shall not assume liability for workperformed by the Seller’s personnel or otheragents which is not directly connected with thedelivery, erection or installation or in the eventof such work being performed at the Purcha-ser’s request without prior consultation withthe Seller.7.7 The Purchaser is advised to take out an insu-rance for weak-current installations at its ownexpense which should provide the usual cover-age in case of damage caused to the orderedand delivered equipment by overvoltage, fire orlightening.
8. Notice of defectsWithout prejudice to the provisions of Article377 HGB [German Commercial Code], noticesof defects, including complaints concerning theweight or quantity of the delivered items, shallbe given in writing no later than 8 days fromthe receipt of the goods.
9. Liability for defectsThe Seller’s liability for defects, including theabsence of agreed product properties, shall besubject to the following provisions:9.1 If any parts or work become unusable
Components 2001356 E N C O D E R S C O U N T E R S C O N T R O L L E R S I N D I C A T O R S R E L A Y S P R I N T E R S C U T T E R S
14.4 At the Seller’s request, the Purchaser shallnotify the Seller of the names of the customersthat have purchased goods to which the Sellerhas reserved title, indicate the amounts stillpayable by such customers and grant access tothe Purchaser’s accounting records to an inde-pendent certified public accountant instructedby the Seller to inspect such records. In theevent of the receivables assigned to the Sellerby the Purchaser exceeding the total amountof the Seller’s unsecured receivables by over 20%, the Purchaser shall be entitled to requestthe Seller to re-assign to the Purchaser anyreceivables in excess of 20 %. The Purchasershall be entitled to collect receivables assignedto the Seller on behalf of the Seller until andunless such right is revoked by the Seller. TheSeller shall be entitled to notify the third partyof the assignment of receivables and to givereasonable instructions. In the event of thePurchaser failing to comply with its contrac-tual obligations, the Seller shall be entitled torecover possession of the goods to which it hasreserved title, without the assertion of suchright constituting a termination of the contractby the Seller.14.5 Processing and other use of goods subjectto retention of titleProcessing, modification, assembling or inte-gration of goods to which the Seller has reser-ved title shall be performed by the Purchaseron behalf of the Seller. If the goods to whichthe Seller has reserved title are processed orinseparably integrated with other goods not inthe Seller’s property, the Seller shall becomeco-owner of the new product, with the Seller’sfractional share in the ownership of the newproduct amounting to the value of the goodsto which the Seller has reserved title in pro-portion to the other processed or integratedgoods at the time of processing or integration.Processing and conversion into a uniform pro-duct:If goods supplied by the Seller are processed orinseparably integrated by the Purchaser withother moveable goods to obtain a uniform pro-duct and if the product thus obtained consti-tutes the main product, it is agreed that thePurchaser shall grant the Seller a proportionateco-ownership in the main product, providedthat the main product is the property of thePurchaser. The Purchaser shall hold the Seller’sownership or co-ownership in safe custody.Scope of validity of provisions relating to goodsto which the Seller has reserved title:The products obtained by processing, modifica-tion, assembling or integration shall be subjectto all other provisions relating to goods towhich the Seller has reserved title.14.6 Due date of total residual debt and noti-fication of third-party debtor of assignment ofreceivables:Due date of total residual debt: if the Purcha-ser fails to perform payment when due or failsto perform payment of due bills of exchange orcheques, or in the event of suspension of pay-ments or debt overload or if a judicial or out-of-court petition for composition or bank-ruptcy is filed against the Purchaser or apetition for bankruptcy is dismissed for insuf-ficiency of assets, then the total residual debt,including bills of exchange with later maturity,shall become due. In such event, the Purchasershall, if so required by the Seller, hand over tothe Seller a list of all goods in the Purchaser’spossession to which the Seller has reserved titleand a list of all receivables assigned to the Sel-ler, indicating the name and address of the deb-tor and the amount of the receivables. The Sel-
ler shall also be entitled to inspect the Purcha-ser’s accounting records to determine advanceassignments of receivables.Notification of third-party debtors of assign-ment of receivables: In the event of the total residual debt becomingdue in accordance with the above provisions,the Purchaser shall, if so required by the Seller,notify its debtors (the Seller’s third-party deb-tors) of the assignment of their debts to theSeller. The Seller shall be entitled to performsuch notification of third-party debtors on itsown account. The Seller shall also be entitledto recover goods to which the Seller has reser-ved title for utilization by the Seller and repay-ment of the Purchaser’s debts. The Purchasershall surrender possession of the goods andenable the Seller to recover possession thereofand grant the Seller or its authorized represen-tatives access to the Purchaser’s premisesduring normal office hours. The fact that theSeller may request the Purchaser to surrenderpossession of such goods and that the Sellermay recover possession thereof shall not bedeemed to constitute a termination of the con-tract by the Seller.
15.Place of performance, jurisdiction andgoverning law15.1 The place of performance of delivery andpayment shall be Aldingen.15.2 Any disputes arising out of the contractbetween fully qualified merchants, legal enti-ties and companies under public law shall bereferred to the court having jurisdiction at theSeller’s principal place of business or, at the Sel-ler’s option, at the place of business of one ofthe Seller’s branch offices.15.3 This contract shall be governed by andconstrued in all respects in accordance with thelaws of the Federal Republic of Germany. Theapplication of the United Nations Conventionon Contracts for the International Sale ofGoods of 11 April 1980 is expressly excluded.
16.Transferability of the contract16.1 The Purchaser and Seller shall not be ent-itled to transfer contractual rights to third par-ties unless specifically agreed to by the otherparty.16.2 The transfer of the Seller’s purchase priceclaims shall not be subject to any limitations.
17.SeverabilityIf any provision of these General Terms andConditions shall be held invalid, illegal or unen-forceable, the validity, enforceability and bin-ding effect of the remaining provisions shallnot be affected thereby.
18.Evidence of originGoods identified as “EC originating product” or“EFTA originating product” in the Seller’s invoi-ces comply with the rules for the definition ofthe term “originating product” applying to pre-ference exports.
19.Data protectionThe Purchaser shall require its customers toassert that protected data may be passed on tothe Seller where this is necessary within thescope of these General Terms and Conditions.
13.4 Bills of exchange or cheques shall only beaccepted on account of payment and only if spe-cifically agreed to by the Seller. Discounting andbank charges shall be borne by the Purchaser.13.5 In the event of the Seller, after the effec-tive date of the contract, gaining knowledge ofcircumstances evidencing a deterioration in thePurchaser’s financial situation, the Seller shallbe entitled to demand immediate settlement ofopen invoices or advance payment or collate-ral securities for scheduled deliveries. In theevent of the Purchaser failing to comply withsuch request, the Seller shall be entitled to ter-minate the contract without notice anddemand compensation for the expenses incur-red by the Seller.13.6 Without prejudice to any other claims, theSeller reserves the right to delay performanceof the work and services under the contract foras long as the Purchaser fails to effect paym-ent of due monies.13.7 The Purchaser shall not be entitled towithhold payments or set off claims againstdue payments, unless the Purchaser’s claimshave been found to be undisputed and legallyenforceable.
14.Retention of title14.1 The Seller reserves title to the ownershipof all goods delivered by the Seller until thePurchaser has effected payment of all receiva-bles arising from the contract (principal andsubsidiary claims) - including receivables to bepaid to companies associated with the Seller -(goods subject to reservation of title). If paym-ent is made in the form of bills of exchange orcheques, the retention of title shall apply untilsuch bills of exchange or cheques have beenpaid or cashed.14.2 Goods purchased from the Seller to whichthe Seller has reserved title shall be used by thePurchaser exclusively within the scope of pro-per business transactions. Transfer of propertyby way of security or pledge or receivables ari-sing from the resale or re-letting of goods shallnot be permitted. The Purchaser agrees tonotify the Seller immediately of any rightsasserted by third parties to goods to which theSeller has reserved title, including a levy of exe-cution on the goods to which the Seller hasreserved title, and, in the event of a levy of exe-cution, to file an objection with the executioncreditor on behalf of the Seller.14.3 The Purchaser shall assign to the Seller, inadvance and by way of security, all receivables,including all subsidiary claims (e.g. ownershipby way of security, ownership of goods subjectto retention of title, bills of exchange, etc.), itis entitled to from the resale or re-letting ofgoods to which the Seller has reserved title,until all payments due to the Seller in connec-tion with the contract have been made. In theevent of a genuine or partial open accountagreement between the Purchaser and itscustomers, the Purchaser shall also assign tothe Seller its rights to terminate the openaccount agreement and to balance theaccounts and any balancing surplus thePurchaser may be entitled to. If the goods towhich the Seller has reserved title are resold/re-let and invoiced together with goods purcha-sed from other suppliers, the Purchaser shallassign to the Seller that portion of the totalsales price or total rent that applies to thegoods to which the Seller has reserved title.These provisions shall also apply to subsidiaryclaims (ownership of goods subject to retentionof title, ownership by way of security, bills ofexchange and the like).
General Terms and Conditions
Product Overview Hengstler
Interested?Then please state your wishes on the fax overleaf– or mark your special product interests on thispage.
Encoders Absolute encoders Incremental encoders Hollow shaft versions Motor Encoders Stainless steel version Explosion-proof versions Fieldbus encoders Sinewave encoders Inductive measuring systems
Industrial counting and control components Control counters Counters in DIN sizes Counters with interface Electromagnetic counters Indicators Measuring systems Mechanical counters Multifunctional counters Pneumatic proximity switches Pneumatic signal indication Pneumatic timers Position indication Preset counters Programmable counters PTB approved counters Repeating counters Tachometers Time counters Timers, analogue and digital Totalizing counters
Industrial controllers Indicators Industrial controllers Miniature industrial controllers PID Industrial controllers Temperature controllers Program controllers Multichannel controllers
Printers and cutters Cutters Linerless Cutters Impact printers Ticket/Receipt printers Journal printers Thermal printers
Relays Bistable Card High voltage Industrial Mains isolation Miniature Miniature power sw Polarised Safety
Please call me – I am particularly interested in...My application is .../my problem is...:
Fax: +49-7424-89-210Company
Last name First name
Department
Function
P.O. Box/Street
City/Code
Phone
Fax
Information Request
Signature, Date
Please send me information:
Fax: +49-7424-89-210
Company
Last name First name
Department
Function
P.O. Box/Street
City/Code
Phone
Fax
Industrial Counting andControl Components
Catalog
Encoders
Catalog Overview
Industrial andTemperature Controllers
Catalog
Product RangeSafety Relays
Brochure CD-ROM Catalog
Product RangeRelays
Brochure CD-ROM
IndustrialCounting and ControlComponents
Innovative products from yourcompetent partner. World-wide
Industrial and TemperatureControllers
grado
Prozesse sicher regeln auch imExtrembereich.
EncoderRange
Innovative products from yourcompetent partner. World-wide
ProgrammübersichtRELAIS
Product RangeRELAYS
Gamme de ProduitsRELAIS
ProgrammübersichtSICHERHEITSRELAIS
Product RangeSAFETY RELAYS
Gamme de ProduitsRELAIS DE SÉCURITÉ
Printers andCutters
Catalog Overview
Overview:PrintersCuttersTerminals
Innovative products from yourcompetent partner. World-wide.
top related