ibm connections docs 2.0 install guide roberto boccadoro – eld engineering martti garden - ibm

IBM Connections Docs 2.0 install

guide

Roberto Boccadoro – ELD EngineeringMartti Garden - IBM

What is IBM Connections Docs ?

With IBM Docs, teams can simultaneously collaborate on word processing, spreadsheet and presentation documents inside and outside the firewall to improve productivity.

IBM Docs authors will be able to store and share documents in IBM SmartCloud, IBM Connections on premise or Filenet, co-edit documents in real time or edit the most up-to-date version on the server regardless if the editing session is concurrent, asynchronous or individual... this greatly decreases the management of multiple revisions from multiple authors in team-based documents.

IBM Docs requires only a browser. There is no other desktop software to install. Utilizing the web browser, users will be able to easily create professional looking documents and share them with others. IBM Docs is designed to be simple yet powerful, allowing users to get started quickly and easily.

Web-based collaborative editors for creating, sharing and collaboratively authoring word processor documents, spreadsheets and presentations.

IBM Connections Docs components

• An IBM Connections Docs deployment consists of six components:

• Docs Editing server (document service)This component provides the core logic for processing of the documents.

• Document Format Conversion server (conversion service)This component performs document type transformations.

• Docs extension plug-in and daemon libraryThese components are the integration elements which enable IBM Connections users to open and edit a document within the Connections Docs context.

• File Viewer server (viewer service)The viewer service enables viewing of the latest published version of a document.

• File Viewer extension plug-in and daemon libraryThese components are the integration element which enable Connections users to view a document within the Connections Docs context.

• Docs proxyThe proxy is used for session affinity in Connections Docs. Session affinity routes requests for the same document from different clients to the same Docs server node.

Architecture (medium to large)

*

**

*Also suppports Oracle & MS SQL **Also supports CIFS on Windows

Shared storage

• Connections Docs shared storage is used by each of the Connections Docs components to store drafts or transfer files between servers. There are three shares that need to be configured for Connections Docs.

• The Connections Docs and Conversion components share storage for the editing and publishing of documents. This shared storage is supported for either NFSv3 or CIFS (SMB). This share is referred to as DOCS DATA.

• The File Viewer and Conversion components share storage for the viewing of documents. If File Viewer and Conversion are installed on the same server, this storage can be local. If they are installed on different servers, this shared storage is supported for either NFSv3 or CIFS (SMB). This share is referred to as VIEWER DATA.

• The File Viewer and Connections Files components share storage for the viewing of documents. If File Viewer and Connections Files are installed on the same server, this storage can be local. If they are installed on different servers, this shared storage is supported for either NFS or CIFS (SMB). This share is referred to as the Connections Files Content Store.

Installation Steps

Software needed

Before the installation you will need to download the following software:

• IBM Connections Docs V2.0 (Partnumber CN7ZLML)• IBM Connections Docs 2.0 iFix 001• Python 2.7.x

It is assumed, that you already have IBM Connections 5.0 or 5.5 installed and have access to the Connections database server (this guide will use DB2).

Since in this case it is a single server installation the IBM Installation Manager of IBM Connections will be reused.

First we need to create two shares for IBM Docs. We create them in C:\IBM and name them DocsShare and ViewerShare.

Now we need to Install Python, use version 2.7.x and not 3.x. With 3.x the installation *will* fail.

Select to install for all users

The default installation path is fine, so accept and click next

Make sure “Add python.exe to Path” is selected! Click Next again.

Click Finish

Check if the Python Path variable has been correctly set:

Open a command prompt and type “set”

If the variable is not set, right click on Computer and click on Properties

Then click on Advanced system settings ..

Click on Environment Variables

If Python is not present in Path, click on Edit.

At the end of the Variable value line add ;C:\Python27 (pay attention to the leading semicolon) and click OK.

Click OK again to close the window.

Click OK for one more time.

In the next step we need to create the IBM Docs database.

Unpack the file DOCS_2.0_WINLIN_ML.zip

It will create the following folders

Open a DB2 Command Window - Administrator

Navigate to the directory where you unzipped the files, e.g c:\install\SetupDB\db2 and run createDb.bat. You need to be patient, it may appear that nothing happens for a few minutes.

Some minutes later you should see all commands have been completed successfully. Now run the updateDBSchema.bat command.

At the end you will see this

The databases have been created with access rights to a user called DocsUser. As we want to use the same user as we use with IBM Connections, we need to grant access to lcuser. In the same folder edit appGrants.sql.

Replace all occurrences of DOCSUSER with LCUSER and save the document.

Now go back to the DB2 command line processor and run the following command:db2 –td@ -f appGrants.sql

You should see all command being run successfully.

Close the db2 Command Window

IBM Docs now comes with a new graphical installer based on IBM Installation Manager. This will make the installation much easier for us.Make sure that Connections is running

We now need to start the Installation Manager.

Click on File-Preferences

click on Add Repository

Click on Browse

Go in the directory where you have unzipped the files..\install\IBMConnectionsDocs-repo ans select repository.config

Click Open

Click OK

Click Ok again

Now click Install

Select IBM Connections Docs and click Next

Accept the license terms and click Next

The default installation directory is fine so click Next.

As we have installed IBM Connections as CCM, meaning together with Filenet select Connections and Content Manager. Deselect the Editor Proxy, as it is only needed, when you have more than one Docs Server. Click Next.

On the information panel, make sure to check User Account Control Disabled and click Next.

Now enter the wasadmin and corresponding password and click on browse.

Go to C:\IBM\WebSphere\AppServer\Profiles\AppSrv01 and click OK.

Click on Validate

You will get no confirmation pop up. Once the Next button becomes available click it.

Now we need to map the Nodes to the Applications. Map all application to the first node and the webserver by first selecting the nodename and then the “>>” button at the proper application.

Scroll down

Click on Validate

Again you will get no notification popup when the validation is done. Click on Next once it comes available.

Now we need to supply the local Admin username and password. This is necessary since it is a remote deployment from the Deployment Manager. It just happens to be on the same machine in our case. Enter Administrator and password in all instances. Then click Validate.

Click Next once it comes available.

On the next screen enter the following values:http://yourserver.com/fncmishttp://yourserver.com/dmfadminhttp://yourserver.com/communities

We have no chat installed, so we just click Next.

In the following screen fill in the values for the database and click Next

The following panel is a bit confusing when installing everything locally. Fill it out as follows and click Next:

Now it wants to know where to install the Conversion Server and how many CPU cores to use. For the path choose C:\IBM\Conversion and reduce the cores to 2. The port should be fine.

Choose C:\IBM\Docs for the installation target for the Editor component and click Next.

On the next Panel we don’t need to do anything and can click Next.

For the Extension directory browse to C:\IBM\Connections\data\shared\provision\webresources .The Daemon should be installed in C:\IBM\Connections\data\shared\ .Click Next.

Now we can choose whether the Web and Connections server should be restarted during the installation. This is useful when installing IBM Connections Docs in production environments because it allows you to do the Docs installation at any time and to restart of the production Connections environment in a specific maintenance time frame. Of course setting both to No will also decreasethe installation time a lot, since the Connections Server do not get restarted once with each feature installed.Since time does not matter we choose Yes for both. Click Next.

Click Next on the configuration file overview panel.

Now you click on Install and grab a coffee or two (or even have lunch).

During the installation two black windows will pop up. This is expected (and annoying, as they pop up every few minutes). These are the conversion tasks running. At the end of the installation we will alter the Task Scheduler to have them started hidden. So long just minimize them once they pop up.In the end you should see the following screen:

Verifying the Docs installationLog in to Connections at http://yourserver.com/homepage/login

Go in Apps - Files

Select New - Spreadsheet

Choose a filename and click Create

This tells us, that the Docs Editor works.

Now enter some data and then click on File / Publish Now.

Enter a description and click Publish.

This message shows you, that the version has been published. For this to work the Conversion Server needs to be working properly, which we tested and proved now.

Now upload a new file:

Click Browse and upload a file

Go in My Files and click the name of the file you uploaded

The file will be opened by the Viewer, click on the down arrow near the Blue box on the right

Select Edit inDocs

The file will be opened in edit mode

This shows that the Viewer and the Editor of Connections Docs work

Now there is only one last thing to do: Change some settings in the Task scheduled in the Task Scheduler

Go to the Windows Task Scheduler:

Click on Task Scheduler Library on the left, then double click onthe kill_timeout task

Change it to run whether the user is logged on or not and select Do not store password. Also select hidden and then OK.

Do the same with the sym_monitor task

From the next reboot on the two black windows should not appear anymore.

I hope you were successful in installing everything! If you have any comments please feel free to contact us!

roberto.boccadoro@eldeng.it

martti.garden@de.ibm.com