how to print photographic quality images from your kyocera mita color printer
Post on 23-Dec-2015
233 Views
Preview:
TRANSCRIPT
How to print photographic quality images from your Kyocera Mita
color printer
Step 1: The Print Screen
As printer drivers sometimes differ, please make sure you make the following
selections in “Properties” from the File > Print window:
1)Print to thick paper (even if you are using glossy paper that is not thick)
2)Set print quality to picture image or photo
Step 2: Preparing the Printer
• Once you have selected the proper settings in the print driver, open the Multi Purpose Tray and place the desired paper into it.
Step 3: Interaction with Printer
• After you have printed the document from your computer, the color printer panel will beep and blink
• Please check the LCD for errors.
• If no errors are present, press Go
LCD
Go button
Step 4: Media Selection Page 1
• If the photo peals from the page or there exist white spots in your print, you are not using the proper paper or missed a selection in Steps 3 or 4.
• You can use a wide variety of papers.
?
Step 4: Media Selection Page 2
Papers that were tested at Tigerville Elementary and worked well are:
1)HP 32# bond glossy photo imaging paper coated 2 side (Item#Q6545A)
2)Kromekote high gloss laser paper, 8pt/48# bond, coated 1 side
3)Futura Laser Gloss, 40# bond/100# text, coated 2 side
4) Mohawk Color Copy Gloss, 60# cover/66# bond)
Rules of Thumb for other papers
• In general, the better the paper, the more it will cost.
• The brighter or whiter the paper, the better the print will look.
• Make sure any paper that you use is specified for LASER PRINTERS.
• Paper can be purchased over the internet for very good prices.
top related