how to make valentine's day pendant diy jewelry making tutorial

How To Make: Valentine’s Day Pendant

Materials: 7 inches of 20 gauge copper wire, 4 inches of 28 gauge copper wire, 2 crackle beads-size 6 mm, 1 glass bead-size 3 mm x 4 mm, 1 glass bead-size 10 mm x 12 mm, 1 copper bead-size 6 mm, 1 copper bead-size 3-4 mm

Tools: Round nose pliers, wire cutters

Step 1: Create 3 loops as shown in the photo. Do it in the middle of the wire

Step 2: Bend wire as shown in the photo

Step 3: Create 2 small loops then insert crackle beads onto them

Step 4: Wrap wires around the beads, then put copper bead onto both wires

Step 5: Wrap one wire around the other then trim the rest of it

Step 6: Insert beads onto the wire which is left, then create hook shape in order to make final loop, if you need to trim the wire and close the loop

Step 7: Take thin wire, and wrap one end around the base as shown in the photo

Step 8: Put the last bead onto the wire, then wrap the second end around the base. Trim the rest of the wires. Now just attach the chain. Your necklace is ready to wear!