how to make multi-beaded pendant diy jewelry making tutorial

How To Make: Multi-Beaded Pendant

Materials: 9 inches of 20 gauge copper wire, 1 white ceramic bead- size 10 mm, 2 faux or real pearl beads- size 4 mm5 seed beads- size around 2 mm, 2 copper beads- size 4 mm

Tools: Round Nose pliers, Wire Cutters

Step 1: Bend wire in the middle of it, then unbend it in order to create drop shape

Step 2: Insert white bead onto both wires then bend wires as shown in the photo

Step 3: Insert pink seed beads then wrap wires around them

Step 4: Insert red seed beads onto the wires, then create 2 bigger loops as shown in the photos

Step 5: Insert copper bead onto both wires

Step 6: Insert faux or real pearl beads onto both wires, then create two loops as shown in the photos

Step 7: Insert copper bead onto both wires, then wrap one wire around the other. Trim one wire if you need to

Step 8: Insert red seed bead onto the wire, then create loop shape. Trim wire if you need to. Now attach chain. Your necklace is ready to wear!