how to make delightful dangle earrings diy jewelry making tutorial

How To Make: Delightful Dangle Earrings

Materials: 12 Inches of 20 Gauge Copper Wire cut into 2 even pieces, 12 Glass Beads – Size 2-3 mm, Pair of Earwires

Tools: Round Nose Pliers, Wire Cutters

Step 1: Insert 1 Glass Bead onto the wire and create a loop with the bead inside it

Step 2: Insert second bead, then wrap wire around it. Repeat this step with third bead

Step 3: Bend wires as shown in the photo

Step 4: Insert another bead, then wrap wire around it. Repeat the steps with fifth bead

Step 5: Shape wires as shown in the photo, then insert glass bead onto both wires

Step 6: Wrap wire around the bead then around the second wire. Trim if you need to and smooth the edge

Step 7: Create final loop, wrap wire around the bottom of the loop then trim it and smooth the edge

Step 8: Repeat all steps to create second earring, then attach earwires. Your earrings are ready to wear!

Design